summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap3-igep0020.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: omap3-igep0020: use SMSC9221 timingsJavier Martinez Canillas2014-04-251-2/+2
| | | | | | | | | | | The IGEPv2 board has a SMSC LAN9221i ethernet chip and not a SMSC LAN911x connected to the GPMC. Each chip needs different timings in order to operate correctly so is wrong to include omap-gpmc-smsc911x.dtsi instead of omap-gpmc-smsc9221.dtsi. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [tony@atomide.com: this is needed to avoid potential memory corruption] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'fbdev-omap-3.15' of ↵Linus Torvalds2014-04-071-3/+55
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP fbdev changes from Tomi Valkeinen: "This is based on the already pulled fbdev-main changes, and this also merges .dts branch from Tony Lindgren (which has also been pulled), so that I was able to add the display related .dts changes. This contains OMAP related fbdev changes for 3.15. The bulk of the patches are for adding Device Tree support for OMAP Display Subsystem: - SoCs: OMAP2/3/4 - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3 IGEP0020, OMAP3 N900 - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors" * tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits) OMAPDSS: HDMI: fix interlace output OMAPDSS: add missing __init for dss_init_ports ARM: OMAP2+: remove pdata quirks for displays OMAPDSS: remove DT hacks for regulators Doc/DT: Add DT binding documentation for tpd12s015 encoder Doc/DT: Add DT binding documentation for TFP410 encoder Doc/DT: Add DT binding documentation for Sony acx565akm panel Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Doc/DT: Add DT binding documentation for HDMI Connector Doc/DT: Add DT binding documentation for DVI Connector Doc/DT: Add DT binding documentation for Analog TV Connector ARM: omap3-n900.dts: add display information ARM: omap3-igep0020.dts: add display information ARM: omap3-beagle-xm.dts: add display information ARM: omap3-beagle.dts: add display information ARM: omap4-sdp.dts: add display information Doc/DT: Add DT binding documentation for OMAP DSS OMAPDSS: acx565akm: Add DT support OMAPDSS: connector-analog-tv: Add DT support OMAPDSS: hdmi-connector: Add DT support ...
| * ARM: omap3-igep0020.dts: add display informationJavier Martinez Canillas2014-03-191-3/+55
| | | | | | | | | | | | | | | | | | | | Add DT data for OMAP3 IGEPv2 board. The board has the following displays: dvi: uses TFP410 encoder to convert DPI to DVI Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3-igep: fix boot fail due wrong compatible matchJavier Martinez Canillas2014-02-281-1/+1
|/ | | | | | | | | | | | This patch is based on commit: 016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree") and fixes a boot hang due the IGEP board being wrongly initialized as an OMAP3430 platform instead of an OMAP3630. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: Split omap3 pinmux core deviceLaurent Pinchart2014-01-071-23/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The omap3_pmx_core pinmux device in the device tree handles the system controller module (SCM) PADCONFS fonction. Its control registers are split in two distinct areas, with other SCM registers in-between. Those other registers can't thus be requested by other drivers as the memory region gets reserved by the pinmux driver. Split the omap3_pmx_core device tree node in two for the two memory regions. The second region address and size depends on the SoC model. The change in omap3.dtsi fixes an "external abort on non-linefetch" when doing cat /sys/kernel/debug/pinctrl/.../pins on a Nokia N900. Note that the core2 padconf region is different for 3430 vs 3630, and does not exist on 3517 as noted by Nishanth Menon <nm@ti.com>. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-By: Sebastian Reichel <sre@debian.org> Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated for 3430 vs 3630 core2 based on Nishant's patch] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsiJavier Martinez Canillas2013-11-261-0/+5
| | | | | | | | | | | | | | | | | | | On Device Tree boot the VDDS_DSI regulator is not linked to the DPI device so omapfb driver probing fails with: [ 3.186035] OMAPFB: omapfb_probe [ 3.190704] omapdss DPI error: can't get VDDS_DSI regulator [ 3.196594] omapfb omapfb: failed to connect default display [ 3.202667] omapfb omapfb: failed to init overlay connections [ 3.208892] OMAPFB: free_resources [ 3.212493] OMAPFB: free all fbmem [ 3.216735] omapfb omapfb: failed to setup omapfb As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi so getting the VDDS_DSI regulator will succeed on dpi_init_regulator(). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3-igep0020: Add pinmuxing for DVI outputJavier Martinez Canillas2013-11-261-0/+41
| | | | | | | | | | | The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's Display SubSystem (DSS). Add mux setup for DSS pins and also for the GPIO 170 pin that is used to ensure that the DVI-D is powered down on power up. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3-igep: Update to use the TI AM/DM37x processorEnric Balletbo i Serra2013-11-261-2/+2
| | | | | | | | | | | | | Most of the boards are using the TI AM/DM37x processor, there is only a small quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support for the 34xx based variant later on as needed. To avoid confusion we have added to the model the (TI AM/DM37x) comment. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: updated comments for the 34xx to 36xx include change] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: Shared file for omap GPMC connected smsc911xTony Lindgren2013-10-141-43/+2
| | | | | | | Looks like at least Igep, Zoom and EVM boards can use a common file for the GPMC connected smsc911x. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap3-igep0020: use standard constant for IRQ flagsJavier Martinez Canillas2013-10-111-1/+1
| | | | | | | | | Commit 840ef8b7 ("ARM: dt: add header to define IRQ flags") added constants for IRQ edge/level triggered types so use it instead of a magic number to enhance the DT readability. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: omap3-igep0020: Add HS USB Host supportJavier Martinez Canillas2013-10-111-0/+49
| | | | | | | | | | Add device nodes for the HS USB Host port 1, USB PHY and its required regulator and also pin mux setup for HS USB1 pins. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS fileLee Jones2013-10-081-4/+4
| | | | | | Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: omap3-igep0020: add mux conf for GPIO LEDsJavier Martinez Canillas2013-10-081-0/+11
| | | | | | | | | The IGEPv2 has a number of GPIO LED connected to OMAP pins. Configure these pins as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: OMAP2+: Use existing constants for GPIOsFlorian Vaussard2013-06-181-4/+4
| | | | | | | | | Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard2013-06-181-1/+1
| | | | | | | | | | Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-igep0020: Add NAND flash supportJavier Martinez Canillas2013-06-181-1/+49
| | | | | | | | | The IGEPv2 board has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3-igep0020: Add SMSC911x LAN chip supportJavier Martinez Canillas2013-06-181-0/+53
| | | | | | | | | | | The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to the OMAP3 processor though the General-Purpose Memory Controller. This patch adds a device node for the ethernet chip as a GPMC child and all its dependencies (regulators, GPIO and pin muxs). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
* ARM: dts: omap3: Add support for IGEPv2 boardJavier Martinez Canillas2013-04-091-0/+56
ISEE IGEPv2 is an TI OMAP3 SoC based embedded board. This patch adds an initial device tree support to boot an IGEPv2 from the MMC/SD. Currently is working everything that is supported by DT on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [benoit.cousson@linaro.org: Update the Makefile for 3.8-rc2] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
OpenPOWER on IntegriCloud