summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/k2e-evm.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: k2e-evm: add 1g ethernet phys nodesGrygorii Strashko2014-11-041-0/+12
| | | | | | | | | | | | Keystone K2E-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus. For more information see: https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
* ARM: dts: keystone-evm: add spi nor flash supportGrygorii Strashko2014-05-121-0/+22
| | | | | | | | | | | | | | | | | | | k2hk, k2e, k2l EVM board have the same Micron N25Q128A11 SPI NOR Flash installed on SPI0 bus. The NOR Flash is splitted on two partistions: partition@0 label = "u-boot-spl"; reg = <0x0 0x80000>; partition@1 label = "misc"; reg = <0x80000 0xf80000>; Hence, add SPI NOR Flash nodes to all k2hk, k2e, k2l EVM boards. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: k2e-evm: add AEMIF/NAND device entryIvan Khoronzhuk2014-05-081-0/+52
| | | | | | | Add AEMIF/NAND device entry. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: move i2c0 device node from SoC to board filesGrygorii Strashko2014-05-081-0/+7
| | | | | | | | | | | I2C devices are not the part of Keystone SoC and have to be defined in board DTS files. Hence, move i2c0 EEPROM device node from Keystone SoC to k2hk, k2e, k2l EVM files as they all have similar EEPROM SoCs installed. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: use common "ti,keystone" compatible instead of -evmIvan Khoronzhuk2014-03-201-1/+1
| | | | | | | | | | | | | | | | As suggested by Olof Johansson at http://www.spinics.net/lists/arm-kernel/msg314009.html. It be better just keeping a "ti,keystone" top-level compatible and just using that to probe. If so we don't have to touch the file for new boards in the future. So use common "ti,keystone" compatible in keystone.c for all boards. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: add support for k2 Edison SoC and EVMMurali Karicheri2014-02-261-0/+60
Keystone2 Edison (K2E) is a Quad Cortex A15 based SoC with 1 DSP. It has standard peripherals such as i2c, spi, uart, timer, pcie, etc similar to k2hk, but without wireless hardwares. This patch add support for k2 Edison SoC and EVM. This re-uses the common keystone.dtsi to include common bindings across the various k2 devices. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
OpenPOWER on IntegriCloud