summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx6q-bx50v3: Enable secure-reg-accessPeter Senna Tschudin2018-02-121-1/+1
| | | | | | | | | | Enable secure debug enable register access for Bx50v3 devices to enable PMU and hardware counters for perf. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Remove empty memory size nodesMarco Franchi2018-02-121-1/+1
| | | | | | | | | Remove the empty reg property from the SoC dtsi files in order to avoid duplicate memory nodes when the correct size is passed in board dts files. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: Add unit address and reg for the anatop nodesFabio Estevam2017-12-261-6/+14
| | | | | | | | | | | | | | | Add unit address and reg for the anatop nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: Move nodes which have no reg property out of busFabio Estevam2017-12-261-67/+69
| | | | | | | | | | | | | | | | | | Move tempmon, ldb and pmu nodes from soc node to root node. The nodes that have been moved do not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/tempmon missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/ldb missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/pmu missing or empty reg/ranges property Based on a patch from Simon Horman for r8a7795.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: add snvs-lpgpr nodeOleksij Rempel2017-12-261-0/+4
| | | | | | | | This node is for Low Power General Purpose Register which can be used as Non-Volatile Storage. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: name the interrupts for the fec ethernet driverTroy Kisky2017-12-261-0/+1
| | | | | | | | | | | | | | | | imx7s/imx7d has the ptp interrupt newly added as well. For imx7, "int0" is the interrupt for queue 0 and ENET_MII "int1" is for queue 1 "int2" is for queue 2 For imx6sx, "int0" handles all 3 queues and ENET_MII And of course, the "pps" interrupt is for the PTP_CLOCK_PPS interrupts This will help document what each interrupt does. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Remove leading zeroes from unit addressesMarco Franchi2017-10-131-89/+89
| | | | | | | | | | | | | | | | | | The following build warnings are seen with W=1: Warning (simple_bus_reg): Node /soc/sram@00900000 simple-bus unit address format error, expected "900000" Warning (simple_bus_reg): Node /soc/aips-bus@02000000 simple-bus unit address format error, expected "2000000" Warning (simple_bus_reg): Node /soc/aips-bus@02000000/pxp@020f0000 simple-bus unit address format error, expected "20f0000" (...) Remove the leading zeroes from unit addresses to fix the warnings. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: update snvs-poweroff maskGuy Shapiro2017-07-161-0/+1
| | | | | | | | | | | | | Make the syscon-poweroff driver change only the shutdown bits on the SNVS_LP control register. This change fixes an issue with the RTC wakeup alarm, that was previously disabled during power off. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connectionsPhilipp Zabel2017-06-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the device tree graph connecting the input multiplexers to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU multiplexers are added as children of the iomuxc-gpr syscon device node. On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2 CSI1 allow to select between CSI0/1 parallel input pads and the MIPI CSI-2 virtual channels 0/3. On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1 CSI1 allow to select between CSI0/1 parallel input pads and any of the four MIPI CSI-2 virtual channels. Changes from Steve Longerbeam: - Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu) - Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..." to "mipi_vcX...". - Added input endpoint anchors to the video muxes for the connections from parallel sensors. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 nodeSteve Longerbeam2017-06-141-0/+7
| | | | | | | | | Add to the MIPI CSI2 receiver node: compatible strings, interrupt sources, and clocks. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: add multiplexer controlsPhilipp Zabel2017-06-141-1/+6
| | | | | | | | | | | The IOMUXC General Purpose Register space contains various bitfields that control video bus multiplexers. Describe them using a mmio-mux node. The placement of the IPU CSI video mux controls differs between i.MX6D/Q and i.MX6S/DL. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Reintroduce 'anatop-enable-bit' where appropriateAndrey Smirnov2017-05-211-0/+3
| | | | | | | | | | | | | | | | | Now that support for 'anatop-enable-bit' has been added to ANADIG driver, reintroduce 'anatop-enable-bit' for all applicable LDOs. Cc: yurovsky@gmail.com Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: adopt DT to new GPC bindingLucas Stach2017-05-151-11/+26
| | | | | | | Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: fix PCI bus dtc warningsRob Herring2017-04-101-1/+2
| | | | | | | | | dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2017-02-231-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
| * Merge tag 'imx-fixes-nc-4.11' of ↵Olof Johansson2017-01-291-6/+6
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX non-critical device tree fixes for 4.11: - A couple of fixes on anatop regulator voltage and constraints according to hardware datasheet. - Correct FEC interrupt routing for i.MX6QP which has got the hardware bug found on i.MX6Q fixed. - Remove unit address from i.MX6 LDB device node to fix DTC warning. - A fix on imx53-qsb board FEC pinmux config to remove the dependency on firmware for setting up pins. - A series from Sascha to fix LPSR pins for i.MX7 boards. * tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx53-qsb-common: fix FEC pinmux config ARM: imx6: remove unit address from LDB node ARM: imx6qp: adapt DT to changed FEC interrupts ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5 ARM: imx6: fix min/max voltage of anatop 2p5 regulator ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names ARM: dts: imx7d-cl-som: Fix OTG power pinctrl ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux ARM: dts: imx7s-warp: Fix watchdog pinmux Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: imx6: remove unit address from LDB nodeLucas Stach2017-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The LDB has no reg property as it uses the IOMUX-GPR syscon to access its registers. Remove the unit address from the DT node to make DT compiler happy. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5Lucas Stach2017-01-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the min/max voltage constraints for the anatop 1p1 and 2p5 regulator to match the typical operating range mentioned in the datasheet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * ARM: imx6: fix min/max voltage of anatop 2p5 regulatorLucas Stach2017-01-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The regulation bound of this regulator are 2.1V to 2.875V, the wrong DT values cause the driver to miscalculate the effective voltage. This isn't really an issue right now, as nobody actively changes the regulator voltage, but better fix it now. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | | Merge tag 'media/v4.11-1' of ↵Linus Torvalds2017-02-211-0/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
| * | | [media] dt-bindings: Add a binding for Video Data Order AdapterPhilipp Zabel2017-01-311-0/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a DT binding documentation for the Video Data Order Adapter (VDOA) of the Freescale i.MX6 SoC. Also, add the compatible property and correct clock to the device tree to match the documentation. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* | | ARM: dts: imx: Pass 'chosen' and 'memory' nodesFabio Estevam2017-01-241-0/+8
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") causes boot issues when the bootloader does not create a 'chosen' node if such node is not present in the dtb. The reason for the boot failure is well explained by Javier Martinez Canillas: "the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info." , so pass an empty 'chosen' node to fix the boot problem. This issue has been seen in the kernelci reports with Barebox as bootloader. Also pass the 'memory' node in order to fix boot issues on the SolidRun iMX6 platforms. Fixes: 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | ARM: dts: imx6: Disable "weim" node in the dtsi filesFabio Estevam2017-01-031-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | Commit 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") causes the following probe error when the weim node is not present on the board dts (such as imx6q-sabresd): imx-weim 21b8000.weim: Invalid 'ranges' configuration imx-weim: probe of 21b8000.weim failed with error -22 There is no need to always enable the "weim" node on mx6. Do the same as in the other i.MX dtsi files where "weim" is disabled and only gets enabled on a per dts basis. All the imx6 weim dts users explicitily provide 'status = "okay"', so this change has no impact on current imx6 weim users. If a board does not use the weim driver it will not describe its 'ranges' property, so simply disable the 'weim' node in the imx6 dtsi files to avoid such probe error message. Fixes: 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Remove skeleton.dtsiFabio Estevam2016-11-141-2/+3
| | | | | | | | | | | | As explained by commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: Add imx-weim parameters to dtsi'sJoshua Clayton2016-11-051-0/+3
| | | | | | | | | | | | | imx-weim should always set address-cells to 2, and size_cells to 1. On imx6, fsl,weim-cs-gpr will always be &gpr Set these common parameters in the dtsi file, rather than in a downstream dts. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"Jagan Teki2016-10-241-3/+3
| | | | | | | Fixed code indent tabs in respetcive imx6qdl dtsi files. Signed-off-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Fix SPDIF regressionFabio Estevam2016-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Commit 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif") changed many more clocks than only the SPDIF core clock as stated in the commit message. The MLB clock has been added and this causes SPDIF regression as reported by Xavi Drudis Ferran and also in this forum post: https://forum.digikey.com/thread/34240 The MX6Q Reference Manual does not mention that MLB is a clock related to SPDIF, so change it back to a dummy clock to restore SPDIF functionality. Thanks to Ambika for providing the fix at: https://community.nxp.com/thread/387131 Fixes: 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif") Cc: <stable@vger.kernel.org> # 4.4.x Reported-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl.dtsi: add "arm,shared-override" for pl310Peter Chen2016-06-161-0/+1
| | | | | | | | | | | | | The imx6 SMP system has the same DMA memory coherency issue [1] with pl310 L2 controller. With this shared override bit set, the customer reports the DMA coherency issue is gone. Besides, I have tested the performance using USB ethernet with/without this bit, it shows no difference. [1] http://patchwork.ozlabs.org/patch/469362/ Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: fix IPU1 DI1 node nameJuergen Borleis2016-06-111-1/+1
| | | | | | | | | | This node describes the DI1 port of IPU, fix the node name to reflect this. There's currently no user of this node in mainline, so this change should not break any supported platforms. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: add clocks property for ocotp nodePeng Fan2016-06-061-0/+1
| | | | | | | | | Add clocks property for ocotp node. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Remove unneeded unit-addressesFabio Estevam2016-05-031-6/+6
| | | | | | | | | | | | | | | | The following build warnings are seen when building with 'W=1' option: Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-1p1@110 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-3p0@120 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-2p5@130 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddcore@140 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddpu@140 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddsoc@140 has a unit name, but no reg property Fix them by removing the unneeded unit-addresses. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: fix dtc warnings for ipu endpointsJoshua Clayton2016-04-261-10/+10
| | | | | | | | | | | | | | When compiled with "W=1", dtc complains: e.g. "Warning (unit_address_vs_reg): Node /soc/ipu@02800000/port@2/endpoint@0 has a unit name, but no reg property" Endpoint nodes don't have a reg property, and the addresses in their node names are ordinals without any special meaning so remove them and swap them for semantic node names. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'armsoc-dt2' of ↵Linus Torvalds2016-03-241-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull more ARM DT changes from Arnd Bergmann: "Here are some final updates for ARM SoC specific dts files: - The i.MX changes were sent relatively late, and had a dependency on the clk tree, so I delayed that a bit. Support for the new i.MX6qp SoC and a couple of new boards is added in this branch. - Uniphier renames a few files to match the final product names that were decided by the company, kudos to the kernel developer(s) for getting support upstream before the product release. Also two boards are added. The patches were posted early enough and nice overall, but we forgot to apply them and decided to give it some more time in linux-next - at91 has two small bug fixes" * tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator ARM: dts: uniphier: add pinmux node for I2C ch4 ARM: dts: uniphier: add @{address} to EEPROM node ARM: dts: uniphier: add PH1-Pro4 Sanji board support ARM: dts: uniphier: add PH1-Pro4 Ace board support ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board ARM: dts: uniphier: add reference clock nodes ARM: dts: uniphier: rework UniPhier System Bus nodes ARM: dts: uniphier: factor out ranges property of support card arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20 ARM: dts: imx53-qsb: Fix gpio button polarity ARM: dts: vfxxx: Add DAC node for Vybrid SoC ARM: dts: imx6q: add missing links between ipu2 and mipi dsi ARM: dts: imx: Add support for Advantech/GE B850v3 ARM: dts: imx: Add support for Advantech/GE B650v3 ARM: dts: imx: Add support for Advantech/GE B450v3 ARM: dts: imx: Add support for Advantech/GE Bx50v3 ARM: dts: imx: Add Advantech BA-16 Qseven module ...
| * ARM: dts: imx6: Use correct SDMA script for SPI coresSascha Hauer2016-02-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers from SPI NOR Flashes. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | ARM: dts: imx6: remove bogus interrupt-parent from CAAM nodeLucas Stach2016-01-281-1/+0
|/ | | | | | | | | | | | The interrupt-parent property is not needed as it is inherited from the parent bus and in the case of the CAAM node actively points to the wrong interrupt controller (GIC instead of GPC). This leads to the CAAM IRQs not getting unmasked at the GPC level, leaving them unable to wake the CPU from wait mode, potentially impacting performance of the CAAM unit when CPUidle is enabled. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: add Vivante GPU nodesLucas Stach2015-12-221-0/+21
| | | | | | | | This adds the device nodes for 2D, 3D and VG GPU cores. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: move GIC to right location in DTLucas Stach2015-12-221-9/+9
| | | | | | | | No functional change, just moving the node to the place where it belongs according to its unit address. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: add IPU aliasesPhilipp Zabel2015-12-221-0/+1
| | | | | | | | | This allows for consistent numbering of the IPU output and input ports. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: remove config space from PCIe controller ranges propertyLucas Stach2015-12-221-2/+1
| | | | | | | | | | This has been moved to the reg property where it belongs for quite some time. The range has been unused by the kernel since then and with kernel 4.4 it's flagged as an unparsable range, as it does not comply to the PCI ranges DT binding. Fix this by removing the superfluous range. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: Change the clock name for spba clockShengjiu Wang2015-12-221-3/+3
| | | | | | | | | Audio IP need the spba clock, but original clock name "dma" is not accurate, so change it to name "spba". The audio driver has been using the new name "spba", the binding document has been updated. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: change default burst size for USBPeter Chen2015-12-221-0/+8
| | | | | | | | | It can improve the USB performance when choosing larger burst size at some systems (bus size is larger), there is no side effect if this burst size is larger than bus size. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: set ahb-burst-config as 0 for USBPeter Chen2015-12-221-0/+4
| | | | | | | | After setting ahb burst configuration as 0, we can increase tx/rx burst size, it will improve the USB performance Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: change the core clock of spdifShengjiu Wang2015-10-191-6/+6
| | | | | | | | The correct core clock of spdif is SPDIF_GCLK, which is added to clock tree. So the dts also need to be updated. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-09-011-10/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
| * ARM: dts: imx: update snvs to use syscon access registerFrank Li2015-08-111-10/+11
| | | | | | | | | | | | | | | | snvs is MFP device. Change dts to use syscon to allocate register resource. snvs power off also switch to common syscon-poweroff Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * ARM: dts: imx6qdl-sabreauto: Add audio supportShengjiu Wang2015-07-151-0/+31
| | | | | | | | | | | | | | Add ESAI, ASRC, CS42888 for imx6qdl-sabreauto board Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2015-08-311-4/+25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.3: API: - the AEAD interface transition is now complete. - add top-level skcipher interface. Drivers: - x86-64 acceleration for chacha20/poly1305. - add sunxi-ss Allwinner Security System crypto accelerator. - add RSA algorithm to qat driver. - add SRIOV support to qat driver. - add LS1021A support to caam. - add i.MX6 support to caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (163 commits) crypto: algif_aead - fix for multiple operations on AF_ALG sockets crypto: qat - enable legacy VFs MPI: Fix mpi_read_buffer crypto: qat - silence a static checker warning crypto: vmx - Fixing opcode issue crypto: caam - Use the preferred style for memory allocations crypto: caam - Propagate the real error code in caam_probe crypto: caam - Fix the error handling in caam_probe crypto: caam - fix writing to JQCR_MS when using service interface crypto: hash - Add AHASH_REQUEST_ON_STACK crypto: testmgr - Use new skcipher interface crypto: skcipher - Add top-level skcipher interface crypto: cmac - allow usage in FIPS mode crypto: sahara - Use dmam_alloc_coherent crypto: caam - Add support for LS1021A crypto: qat - Don't move data inside output buffer crypto: vmx - Fixing GHASH Key issue on little endian crypto: vmx - Fixing AES-CTR counter bug crypto: null - Add missing Kconfig tristate for NULL2 crypto: nx - Add forward declaration for struct crypto_aead ...
| * | ARM: dts: mx6qdl: Add CAAM device nodeVictoria Milhoan2015-08-101-4/+25
| |/ | | | | | | | | | | | | | | Add CAAM device node to the i.MX6 device tree. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | ARM: imx6: correct i.MX6 PCIe interrupt routingLucas Stach2015-08-061-4/+4
|/ | | | | | | | | | | The PCIe interrupts are also routed through the GPC. This has been missed from the conversion to stacked IRQ domains as the PCIe controller uses an explicit interrupt map and thus doesn't inherit the SoC global interrupt parent. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Cc: <stable@vger.kernel.org> # 4.1 Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Add power-domain phandle to CODA device nodePhilipp Zabel2015-06-031-0/+1
| | | | | | | | | The CODA960 VPU is part of the PU power domain. Add power-domains phandle so it can be associated with the PU generic pm domain for power gating. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
OpenPOWER on IntegriCloud