summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos4210.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210Krzysztof Kozlowski2018-02-261-0/+6
| | | | | | | | | | | | | | Typo in unit address of PPMU ACP caused DTC warnings: arch/arm/boot/dts/exynos4412-odroidu3.dtb: Warning (simple_bus_reg): Node /soc/ppmu_acp@10ae0000 simple-bus unit address format error, expected "106e0000" PPMU ACP (under 0x10ae0000 address) is present only in Exynos4210 so move this node to exynos4210.dtsi with fixing the reg address to proper one. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
* ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodesViresh Kumar2018-02-131-2/+0
| | | | | | | | | | | The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused properties from the CPU nodes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add soc node to exynos4210Maciej Purski2018-02-131-255/+258
| | | | | | | | Soc nodes are used in other exynos DTS. Exynos4210 boards should use them as well. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use labels instead of full paths in exynos4210Maciej Purski2018-02-131-51/+47
| | | | | | | | Extend camera, mixer and tmu nodes by labels, not by full path in Exynos 4210 DTSI. This avoids error-prone redefinition of nodes. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use pinctrl labels in exynos4210-pinctrlMaciej Purski2018-02-121-1/+2
| | | | | | | | | Labels for pinctrl's are defined in exynos4210.dtsi. Use them in exynos4210-pinctrl instead of full names, as it is done in other Exynos DTSes. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski2018-01-031-5/+2
| | | | | | Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use lower case hex addresses in node unit addressesKrzysztof Kozlowski2017-12-181-4/+4
| | | | | | | | | | | | | | Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm/boot/dts/exynos5422-odroidhc1.dtb: Warning (simple_bus_reg): Node /soc/nocp@10CA1000 simple-bus unit address format error, expected "10ca1000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/exynos*.dts* Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* arm: dts: fix unit-address leading 0sRob Herring2017-10-201-2/+2
| | | | | | | | | | | | | Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: dts: exynos: Use - instead of @ for DT OPP entriesViresh Kumar2017-04-201-16/+16
| | | | | | | | | | | | | | | | | | | | Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> [k.kozlowski: Split patch per ARM and ARM64] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Fix infinite interrupt in soft mode on Exynos4210 and ↵Krzysztof Kozlowski2017-03-211-1/+1
| | | | | | | | | | | | | | | Exynos5440 In soft (no-reboot) mode, the driver self-pings watchdog upon expiration of an interrupt. The interrupt has to be cleared, because otherwise system enters infinite interrupt handling loop. Use a samsung,s3c6410-wdt compatible to select appropriate quirk for clearing the watchdog interrupt. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
* ARM: dts: exynos: Enable watchdog on all Exynos4 boardsKrzysztof Kozlowski2017-03-131-1/+0
| | | | | | | | | Watchdog module does not have external dependencies so it can be safely enabled in exynos4.dtsi thus making it available for all Exynos4-based boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* ARM: dts: exynos: Fix watchdog reset on Exynos4412Krzysztof Kozlowski2017-03-131-0/+9
| | | | | | | | | | | | | | | | | The Exynos4412 has the same watchdog as newer SoCs (e.g. Exynos5250). Just like the others, for working it requires additional steps in Power Management Unit: unmasking the reset request and enabling the system reset. Without these additional steps in PMU, the watchdog will not be able to reset the system on expiration event. Change the compatible of Exynos4412 watchdog device node to samsung,exynos5250-wdt which includes the additional PMU steps. This will also fix infinite watchdog interrupt in soft mode (lack of interrupt clear) because it is also included in samsung,exynos5250-wdt. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* ARM: dts: exynos: Add labels to all existing power domainsMarek Szyprowski2017-01-311-0/+1
| | | | | | | Provide human readable names for all power domains defined in Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4Krzysztof Kozlowski2016-11-031-20/+20
| | | | | | | Replace hard-coded values of type of GIC interrupt and its flags with respective macros from header to increase code readability. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210Krzysztof Kozlowski2016-11-031-12/+24
| | | | | | | | | | | | | | | | Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and generates an error: genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) The GIC requires shared interrupts to be edge rising or level high. Platform declares support for both. Arbitrarily choose level high everywhere hoping it will work on each platform. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
* ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210Chanwoo Choi2016-05-031-0/+159
| | | | | | | | | | | | | | | | | | This patch adds the bus nodes for Exynos4210 SoC. Exynos4210 SoC has one power line for all buses to translate data between DRAM and sub-blocks. Following list specifies the detailed relation between DRAM and sub-blocks: - DMC/ACP clock for DMC (Dynamic Memory Controller) - ACLK200 clock for LCD0 - ACLK100 clock for PERIL/PERIR/MFC(PCLK) - ACLK160 clock for CAM/TV/LCD0/LCD1 - ACLK133 clock for FSYS/GPS - GDL/GDR clock for LEFTBUS/RIGHTBUS - SCLK_MFC clock for MFC Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Unify G2D device node with other devices on exynos4Marek Szyprowski2015-12-291-1/+0
| | | | | | | | G2D device is always available and doesn't depend on any external (board specific) peripherals, so it can be unconditionally enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Add power domain to G2D device on exynos4210Marek Szyprowski2015-12-291-0/+1
| | | | | | | | | G2D device and it's SYSMMU belongs to LCD0 power domain on Exynos 4210, so add missing power-domains property to G2D device node (G2D's SYSMMU is already bound to LCD0 power domain). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: MDMA1 device belongs to LCD0 power domain on exynos4210Marek Szyprowski2015-12-291-0/+4
| | | | | | | | | On Exynos 4210 MDMA1 device belongs to LCD0 power domain, so add proper power-domains property. On Exynos 4x12, it belongs to TOP power domain, which is always enabled, thus require no assignment in exynos4x12.dtsi. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Fix power domain for sysmmu-rotator device on exynos4Marek Szyprowski2015-12-291-0/+4
| | | | | | | | | | | Rotator device and it's SYSMMU belongs to different power domains on various Exynos4 SoC revisions: LCD0 for 4210 and TOP for 4x12. This patch fixes this by moving power-domains property to exynos4210.dtsi. TOP power domain is always enabled and it is not represented in DTS. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Add rotator nodes on exynos4Marek Szyprowski2015-12-291-0/+4
| | | | | | | | | This patch adds device node for Rotator device to Exynos 4210 and 4x12 device tree files. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: add CPU OPP and regulator supply property for exynos4210Thomas Abraham2015-07-211-0/+12
| | | | | | | | | | | | | | | | | | For Exynos4210 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Andreas Farber <afaerber@suse.de> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: removed exynos5250 and exynos5420 support for now] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [k.kozlowski: Rebased, moved cpu nodes to alphabetical position] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: add sysmmu nodes for exynos4Marek Szyprowski2015-06-041-0/+23
| | | | | | | | | This patch adds System MMU nodes that are specific to Exynos4210/4x12 series. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Use labels for overriding nodes in exynos4210Krzysztof Kozlowski2015-06-031-22/+21
| | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Add labels to exynos4 nodesKrzysztof Kozlowski2015-06-031-3/+3
| | | | | | | | Add new labels to certain nodes so they could be easily referenced by Exynos4 board DTS files. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: add hdmi related nodes for exynos4 SoCsMarek Szyprowski2015-02-271-0/+8
| | | | | | | | This patch adds entries for HDMI, Mixer and i2c with hdmi-phy modules found in Exynos 4210 and 4x12 SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Provide dt bindings identical for Exynos TMULukasz Majewski2015-02-271-1/+24
| | | | | | | | | | | Presented device tree bindings provide data already hardcoded in the exynos_tmu_data.c file. After this commit, it should be possible to reuse common thermal core framework in Exynos SoCs. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Adding CPU cooling binding for Exynos SoCsLukasz Majewski2015-02-271-1/+4
| | | | | | | | | Presented patch aims to move data necessary for correct CPU cooling device configuration from exynos_tmu_data.c to device tree. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2015-02-171-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
| * ARM: dts: Add PPMU dt node for exynos4 and exynos4210Chanwoo Choi2015-02-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add PPMUs (Platform Performance Monitoring Unit) dt node for Exynos4 (Exynos4210/4212/4412) SoCs. PPMU dt node is used for monitor the utilization of each IP. The Exynos4210/Exynos4212/Exynos4412 SoC includes following PPMUs: - PPMU_DMC0 0x106A_0000 - PPMU_DMC1 0x106B_0000 - PPMU_CPU 0x106C_0000 - PPMU_ACP 0x10AE_0000 - PPMU_RIGHT_BUS 0x112A_0000 - PPMU_LEFT_BUS 0x116A_0000 - PPMU_FSYS 0x1263_0000 - PPMU_LCD0 0x11E4_0000 - PPMU_CAMIF 0x11AC_0000 - PPMU_IMAGE 0x12AA_0000 - PPMU_TV 0x12E4_0000 - PPMU_3D 0x1322_0000 - PPMU_MFC_LEFT 0x1366_0000 - PPMU_MFC_RIGHT 0x1367_0000 Additionally, the Exynos4210 SoC includes following PPMUs: - PPMU_LCD1 0x1224_0000 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| * ARM: dts: convert to generic power domain bindings for exynos DTMarek Szyprowski2015-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces all custom samsung,power-domain dt properties with generic power domain bindings and updates documentation Samsung's devices referring to old binding. Suggested-by: Kevin Hilman <khilman@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [javier.martinez@collabora.co.uk: tested on the Exynos5800 Peach Pi Chromebook] Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | ARM: 8265/1: dts: exynos4: Add nodes for L2 cache controllerTomasz Figa2015-01-161-0/+9
|/ | | | | | | | | | | This patch adds device tree nodes for L2 cache controller present on Exynos4 SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: dts: add CPU nodes for Exynos4 SoCsBartlomiej Zolnierkiewicz2014-10-211-0/+17
| | | | | | | | | | | | | | | Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation when topology is read from DT") fixed GIC driver to filter cluster ID from values returned by cpu_logical_map() for SoCs having registers mapped without per-CPU banking making it is possible to add CPU nodes for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also required by future changes adding initialization of cpuidle states in Exynos cpuidle driver through DT. Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Merge tag 'dt-for-3.17' of ↵Linus Torvalds2014-08-081-6/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ...
| * ARM: dts: clean up arm-pmu node for exynos4Chanho Park2014-07-191-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans a arm-pmu node up for exynos4. Only exynos4412 series boards have four pmu interrupts. Rest of exynos4 boards, except 4412, have only two pmu interrupts. Thus, we can define two interrupts in the exynos4.dtsi and extends the interrupts only exynos4412.dtsi. Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | ARM: dts: exynos: Update PMU node with CLKOUT related dataTomasz Figa2014-07-261-0/+10
|/ | | | | | | | This patch extends nodes of PMU system controller on Exynos4210, 4x12, 5250 and 5420 SoCs with newly defined properties used by Exynos CLKOUT driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
* ARM: EXYNOS: Map SYSRAM through generic DT bindingsSachin Kamat2014-05-151-0/+18
| | | | | | | | | | | | | Instead of hardcoding the SYSRAM details for each SoC, pass this information through device tree (DT) and make the code SoC agnostic. Generic DT SRAM bindings are used for achieving this. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Merge tag 'exynos-cleanup' of ↵Arnd Bergmann2014-03-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3 Merge "Exynos cleanup for v3.15" from Kukjin Kim: - reorganize code for - add support reserve memory for mfc-v7 - consolidate exynos4 and exynos5 machine codes - add generic compatible strings for exynos4 and exynos5 - update DT with generic compatible strings - move clk related dt-binding header file in dt-bindings/clock * tag 'exynos-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Update Exynos DT files with generic compatible strings ARM: EXYNOS: Add generic compatible strings ARM: EXYNOS: Consolidate exynos4 and exynos5 machine files ARM: EXYNOS: Consolidate CPU init code ARM: SAMSUNG: Introduce generic Exynos4 and 5 helpers ARM: EXYNOS: Add support to reserve memory for MFC-v7 ARM: SAMSUNG: Reorganize calls to reserve memory for MFC Conflicts: arch/arm/mach-exynos/exynos.c Signed-off-by; Arnd Bergmann <arnd@arndb.de>
| * ARM: dts: Update Exynos DT files with generic compatible stringsSachin Kamat2014-03-211-1/+1
| | | | | | | | | | | | | | | | Add generic compatible strings to the respective board DT files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | ARM: dts: use macros in clock bindings for exynos4Andrzej Hajda2014-02-261-4/+5
|/ | | | | | | | | | | The patch replaces magic numbers with macros defined in DT header in exynos4 clock bindings. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: Fix missing spaces after labels for exynosTomasz Figa2013-12-211-2/+2
| | | | | | | | | | For consistency with other device tree nodes, this patch adds missing spaces after node labels. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: Simplify MCT interrupt map for exynos4 SoCsTomasz Figa2013-12-211-9/+8
| | | | | | | | | | There is no need to use two cells for interrupt specifiers inside the MCT interrupt map, so this patch simplifies the map to use one cell. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: Drop interrupt controller properties from MCT nodes for exynos4 SoCsTomasz Figa2013-12-211-2/+0
| | | | | | | | | | | MCT is not an interrupt controller and so there is no point for device tree nodes representing it to contain interrupt-controller and #interrupt-cells properties. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2013-09-061-0/+30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
| * ARM: dts: Add camera device nodes for Exynos4210 SoCsSylwester Nawrocki2013-08-071-0/+30
| | | | | | | | | | | | | | | | | | | | Add common camera node and detailed properties for the Exynos4210 FIMC devices. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | ARM: dts: Remove '0x's from Exynos4210 DTSI fileLee Jones2013-08-061-1/+1
|/ | | | | | | | ... for the sake of consistency and assumed convention. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: use #include for all device trees for SamsungPadmavathi Venna2013-06-191-2/+2
| | | | | | | | | | Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: Add clock entries to G2D node for exynos4210Sachin Kamat2013-06-121-0/+2
| | | | | | | Added clock entries to G2D node. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: dts: Add TMU clock entries to exynos4210.dtsiSachin Kamat2013-06-101-0/+3
| | | | | | | Adds TMU clock entries to exynos4210.dtsi file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Merge tag 'multiplatform-for-linus-2' of ↵Linus Torvalds2013-05-071-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM Exynos multiplatform changes from Arnd Bergmann: "These continue the multiplatform support for exynos, adding support for building most of the essential drivers (clocksource, clk, irqchip) when combined with other platforms. As a result, it should become really easy to add full multiplatform exynos support in 3.11, although we don't yet enable it for 3.10. The changes were not included in the earlier multiplatform series in order to avoid clashes with the other Exynos updates. This also includes work from Tomasz Figa to fix the pwm clocksource code on Exynos, which is not strictly required for multiplatform, but related to the other patches in this set and needed as a bug fix for at least one board." * tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver irqchip: exynos: look up irq using irq_find_mapping irqchip: exynos: pass irq_base from platform irqchip: exynos: localize irq lookup for ATAGS irqchip: exynos: allocate combiner_data dynamically irqchip: exynos: pass max combiner number to combiner_init ARM: exynos: add missing properties for combiner IRQs ...
OpenPOWER on IntegriCloud