summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMCKishon Vijay Abraham I2017-08-161-0/+15
| | | | | | | | | | Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay configuration values for the various MMC modes for dra74 SoC and use it in the pinctrl properties of MMC devicetree nodes present in am57xx-beagle-x15/am57xx-beagle-x15-revb1. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am57xx-beagle-x15-revb1: Fix supply name used for MMC1 IO linesKishon Vijay Abraham I2017-06-191-1/+1
| | | | | | | | | | | | | | | The dt binding documentation of omap-hsmmc recommends using "vmmc_aux" for IO supply lines. However commit 0af28cc92690d8c ("ARM: dts: am57xx-beagle-x15: Add support for rev B1") added it as "vmmc-aux". Now that anyways it needs to be fixed, use the generic "vqmmc" binding instead of the deprecated "vmmc_aux". Fixes: commit 0af28cc92690d8c ("ARM: dts: am57xx-beagle-x15: Add support for rev B1") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to ↵Grygorii Strashko2017-01-121-0/+5
| | | | | | | | | | | | | | | | | 10/100 Mbps" According to errata i880 description the speed of Ethernet port 1 on AM572x SoCs rev 1.1 should be limited to 10/100Mbps, because RGMII2 Switching Characteristics are not compatible with 1000 Mbps operation [1]. The issue is fixed with Rev 2.0 silicon. Hence, rework Beagle-X15 and Begale-X15-revb1 to use phy-handle instead of phy_id and apply corresponding limitation to the Ethernet Phy 1. [1] http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am57xx-beagle-x15: Add support for rev B1Nishanth Menon2016-09-131-0/+24
Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates for allowing UHS SD cards to function with the split of supply to SD card from a dedicated LDO. As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V SoC input when the SD card is in UHS 1.8V mode. NOTE: For UHS mode to function, we need full fledged IODelay support in kernel to be functional. IODelay support is yet to be added. Further, It does not make much sense to spin off a new board compatible flag since there is no real functional benefit for the same. Note: Even though production version is supposed to be B1, there is over ~200 boards of previous version (A2)[2] out there which continue to get supported with the existing dts file (to maintain compatibility with existing bootloaders for A2) and the production board is now supported as revb1. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf [2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2 Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud