summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'dt-for-3.17' of ↵Linus Torvalds2014-08-081-4/+47
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ...
| * Merge tag 'zynq-dt-for-3.17-3' of git://git.xilinx.com/linux-xlnx into next/dtOlof Johansson2014-07-301-1/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "Xilinx Zynq dt changes for v3.17 - third pull request" from Michal Simek: arm: Xilinx Zynq dt patches for v3.17 third pull request - Add Adapteva Parallella board/DT - Add SPI nodes - Add CAN nodes - Clean Zynq description * tag 'zynq-dt-for-3.17-3' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: dts: zynq: Add SPI ARM: dts: zynq: Add DMAC for Parallella ARM: dts: zynq: Add Parallella device tree Documentation: devicetree: Adapteva boards Documentation: devicetree: Adapteva vendor prefix Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: dts: zynq: Add Parallella device treeAndreas Färber2014-07-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | This allows to boot the Adapteva Parallella board to serial console. Cc: Andreas Olofsson <andreas@adapteva.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | Merge tag 'for-3.17/bcm-dt' of git://github.com/broadcom/mach-bcm into next/dtArnd Bergmann2014-07-281-0/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "ARM: mach-bcm: dt updatees for 3.17" from Matt Porter: - BCM Mobile SMP support - BRCM STB platform support * tag 'for-3.17/bcm-dt' of git://github.com/broadcom/mach-bcm: ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 ARM: brcmstb: add misc. DT bindings for brcmstb ARM: brcmstb: add CPU binding for Broadcom Brahma15 ARM: dts: enable SMP support for bcm21664 ARM: dts: enable SMP support for bcm28155 devicetree: bindings: document Broadcom CPU enable method Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | ARM: brcmstb: dts: add a reference DTS for Broadcom 7445Marc Carino2014-07-281-0/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a sample DTS which will allow bootup of a board populated with the BCM7445 chip. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
| * | Merge tag 'mvebu-dt-3.17-4' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann2014-07-281-1/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "mvebu DT changes for v3.17 (round 4)" from Jason Cooper" - Armada XP - New board, Lenovo ix4-300d NAS - Add Lenovo to vendor-prefixes - Dove - Add LCD controllers * tag 'mvebu-dt-3.17-4' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NAS of: Add Lenovo Group Ltd. to the vendor-prefixes list. ARM: dts: dove: add DT LCD controllers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | ARM: mvebu: Add dts definition for Lenovo Iomega ix4-300d NASBenoit Masson2014-07-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/ Signed-off-by: Benoit Masson <yahoo@perenite.com> Link: https://lkml.kernel.org/r/1406503839-4662-1-git-send-email-yahoo@perenite.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | Merge tag 'v3.17-rockchip-rk3288' of ↵Arnd Bergmann2014-07-281-0/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "Initial support for Rockchip RK3288 SoCs" from Heiko Stuebner: * tag 'v3.17-rockchip-rk3288' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: Build dtbs for Rockchip boards ARM: dts: add rk3288 evaluation board ARM: dts: rockchip: add core rk3288 dtsi ARM: rockchip: enable support for RK3288 SoCs ARM: Kconfig: set default gpio number for rockchip SoCs ARM: rockchip: add debug uart used by rk3288 ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options dt-bindings: arm: add cortex-a12 and cortex-a17 cpu compatible properties Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | ARM: dts: Build dtbs for Rockchip boardsDoug Anderson2014-07-261-0/+5
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * | | Merge tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson2014-07-201-0/+1
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "ARM: mvebu: DT changes for v3.17 (round 2)" from Jason Cooper: mvebu DT changes for v3.17 (round 2): - kirkwood * Add d2 Network v2 board - mvebu * Add Armada 375 ethernet node * Add CA9 MPcore SoC controller node * Add support for dynamic freq scaling on Armada XP * tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: update Armada XP DT for dynamic frequency scaling ARM: mvebu: add CA9 MPcore SoC Controller node ARM: mvebu: Enable the network controller in Armada 375 DB board ARM: mvebu: Add support for the network controller in Armada 375 SoC ARM: Kirkwood: add DT support for d2 Network v2 ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: Kirkwood: add DT support for d2 Network v2Simon Guinot2014-07-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds DT support for the LaCie NAS d2 Network v2 (d2net_v2). Most of the hardware characteristics are shared with the 2Big and 5Big Network v2 boards. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1404830545-15581-3-git-send-email-simon.guinot@sequanux.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | Merge tag 'mvebu-dt-3.17' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson2014-07-201-0/+3
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "ARM: mvebu: DT changes for v3.17" from Jason Cooper: mvebu DT changes for v3.17 - kirkwood * add boards net2big and net5big - dove * add vendor prefix for SolidRun * split CuBox into it's variants * tag 'mvebu-dt-3.17' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: fix net5big regulator gpio assignments ARM: dts: mvebu: split SolidRun CuBox into variants dt-binding: add vendor prefix for SolidRun ARM: Kirkwood: Add DT descriptions for net2big and net5big. Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dts: mvebu: split SolidRun CuBox into variantsSebastian Hesselbarth2014-06-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As Mainlining effort for SolidRun CuBox has been carried out on the Engineering Sample, the board DTS was reflecting this. Actually, SolidRun CuBox comes in three different variants: Engineering Sample (ES), production with 1GB RAM (1G), and production with 2GB RAM (2G). Therefore, we base current dove-cubox.dts on to the 1G production variant and add a ES dts to add required quirk for misrouted SDHCI card detect on top of dove-cubox.dts. For the 2G variant we rely on the bootloader to setup correct RAM size. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1401228006-3212-1-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | ARM: Kirkwood: Add DT descriptions for net2big and net5big.Andrew Lunn2014-06-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Describe LaCie 2Big and 5Big Network v2 using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1401132591-26305-3-git-send-email-andrew@lunn.ch Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | Merge tag 'samsung-dt' of ↵Olof Johansson2014-07-191-0/+2
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT updates for v3.17" from Kukjin Kim: exynos3250: add i2s dt for audio interface exynos4 - cleanup arm-pmu node because of 4 pmu on exynos4412 but 2 pmu on other exynos4 SoCs - add support sub-nodes to exynos usb host for exynos4 exynos4412-odroid-common - fix T-FLASH hotplug detection - disable 'always on' for BUCK8 - add support for GPIO based buttons - add MAX98090 audio codec exynos4412-odroidx2 and exynos4412-odroidu3 - refactor exynos4412-odroidx and exynos4412-odroid-common for odroid-x2 and u2/u3 exynos4412-odroidx - add support for USB phy, host and device - enable common hardware blocks, secure firmware calls, watchdog, g2d and fimc (mem2mem) multimedia accelerators - add support for USB phy, host and device - correct memory size exynos5410 - fill in CPU clock-frequency property to avoid warning exynos5420 - remove display pd because of instability exynos5420-peach-pit and exynos5800-peach-pi - sort nodes each other to check its differences easily - enable audio support and add sound-card name property - add mask-tpm-reset node - add cros_ec including keyboard, i2c tunnel and tps65090 and battery under the i2c tunnel * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add I2S dt node for exynos3250 ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi ARM: dts: clean up arm-pmu node for exynos4 ARM: dts: remove display power domain for exynos5420 ARM: dts: Add sound nodes for Odroid-X2/U3 boards ARM: dts: fix T-FLASH hotplug detection for exynos4412-odroid-common ARM: dts: add support for GPIO buttons for exynos4412-odroid ARM: dts: disable 'always on' for BUCK8 regulator for exynos4412-odroid-common ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 ARM: dts: correct memory size for exynos4412-odroidx ARM: dts: add support for USB phy, host and device for exynos4412-odroidx ARM: dts: enable common hardware blocks for exynos4412-odroidx ARM: dts: add port sub-nodes to exynos usb host modules for exynos4 ARM: dts: Add mask-tpm-reset node in exynos5800-peach-pi ARM: dts: Add mask-tpm-reset node in exynos5420-peach-pit ARM: dts: Add sound-card name for Snow/Peach-Pit/Peach-Pi ARM: dts: Fill in CPU clock-frequency for exynos5410 ARM: dts: Sort nodes within Peach-pit/Peach-pi dts files ARM: dts: Enable audio support for exynos5800-peach-pi
| | * | | ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3Marek Szyprowski2014-07-161-0/+2
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves some parts of exynos4412-odroidx.dts to common exynos4412-odroid-common.dtsi file and adds support for Odroid X2 and U2/U3 boards. X2 is same as X, but it has faster SoC module (1.7GHz instead of 1.4GHz), while U2/U3 differs from X2 by different way of routing signals to host USB hub. It also lacks some hw modules not yet supported by those dts files (i.e. LCD & touch panel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | Merge tag 'tegra-for-3.17-dt' of ↵Olof Johansson2014-07-191-0/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: device tree changes for 3.17" from Thierry Reding: - New board support: * Apalis T30 - HDA support for Tegra124 and Venice2 - Display on Medcom Wide and Roth - GK20A support on Tegra124 - XUSB pad controller for Tegra124 and Jetson TK1 - Various cleanups This pulls in the for-3.17/fuse-move, for-3.17/dt-cros-ec-kbd and for-3.17/xusb-padctl branches to resolve dependencies. Note that the Apalis T30 support has a runtime dependency on the for-3.17/pcie-regulators branch, so they should preferably be applied in that order. I didn't merge that branch into this because Apalis T30 support is new, therefore can't regress, and because the dependency exists only at runtime. * tag 'tegra-for-3.17-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits) ARM: tegra: roth: add display DT node ARM: tegra: Fix typoed ams,ext-control properties ARM: tegra: jetson-tk1: Add XUSB pad controller ARM: tegra: tegra124: Add XUSB pad controller ARM: tegra: add GK20A GPU to Tegra124 DT ARM: tegra: of: add GK20A device tree binding ARM: tegra: roth: enable input on mmc clock pins ARM: tegra: roth: fix unsupported pinmux properties ARM: tegra: Migrate Apalis T30 PCIe power supply scheme ARM: tegra: tamonten: add the display to the Medcom Wide ARM: tegra: tamonten: add the base board regulators ARM: tegra: initial support for apalis t30 ARM: tegra: jetson-tk1: mark eMMC as non-removable ARM: tegra: venice2 - Enable HDA ARM: tegra: Add Tegra124 HDA support ARM: tegra: Add the EC i2c tunnel to tegra124-venice2 soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: tegra: initial support for apalis t30Marcel Ziswiler2014-07-171-0/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the device tree to support Toradex Apalis T30, a computer on module which can be used on different carrier boards. The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller as well as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio codec which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the modules device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). While at it also add the device tree binding documentation for Apalis T30. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren: fixed some node sort orders] Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | Merge tag 'sunxi-dt-for-3.17' of ↵Olof Johansson2014-07-191-1/+6
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Merge "Allwinner DT additions for 3.17" from Maxime Ripard: Among the few patches that we have so far, there's a few noticeable changes: - Introduction of the Allwinner A23 SoC - Support for the GMAC on the A31. This is only available so far on the boards which bootloader enable the PHY regulator. - Addition of the infrared receiver * tag 'sunxi-dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (22 commits) ARM: dts: sun6i: Add Merrii A31 Hummingbird support ARM: dts: sun6i: Add ethernet alias for GMAC ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller node ARM: dts: sun6i: Add GMAC clock node to the A31 dtsi ARM: dts: sun6i: Add pin muxing options for GMAC ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI ARM: sun8i: Add reset controller nodes to the DTSI ARM: sun8i: Add basic clock nodes to the DTSI ARM: dts: sun4i: Add ir node to various boards ARM: dts: sun4i: Add ir controller nodes and pinmux ARM: dts: sun4i: Add new ba10-tvbox board ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir ARM: dts: sun7i: Add AXP209 support to various boards ARM: dts: sun4i: Add AXP209 support to various boards ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes ARM: sun8i: dt: Add Ippo-q8h v5 support ARM: sunxi: Add Allwinner A23 dtsi ARM: sunxi: Add IR controllers on A20 to dtsi ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: dts: sun6i: Add Merrii A31 Hummingbird supportMaxime Ripard2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
| | * | | ARM: dts: sun4i: Add new ba10-tvbox boardHans de Goede2014-07-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ba10 tvbox is an A10 based android tvbox, with 512M RAM, 8G nand flash, rtl8188ctv usb wifi 1 USB-A receptacle hooked up to an EHCI/OHCI controller, 1 USB-A receptacle hooked up to the OTG and 100Mbit ethernet using a rtl8201 phy. The PCB is labelled ba10 hence I've named the board ba10-tvbox. It is used in noname allwinner A10 tv-boxes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | | ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3Zoltan HERPAI2014-07-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LinkSprite pcDuino V3 is an A20 based development board featuring arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi and 100 Mbit ethernet using an ip101a phy: http://www.pcduino.com/pcduino-v3/ Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> [hdegoede@redhat.com: Various cleanups, correct led pins] [hdegoede@redhat.com: Add axp209, ir and gpio-keys nodes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | | ARM: sun8i: dt: Add Ippo-q8h v5 supportChen-Yu Tsai2014-07-011-0/+2
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets with A23 SoCs. There are at least 2 versions of the board, with different peripherals, such as WiFi chips. Common features among these tablets include 512 MB DRAM, NAND, MMC, LCD, capacitive touchscreen, accelerometer, 1 or 2 camera sensors, USB OTG, microphone and speaker. v5 of these board designs has a ESP8089 WiFi chip (not supported) connected to mmc1. This patch adds very basic support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | Merge tag 'imx-dt-3.17' of ↵Olof Johansson2014-07-191-0/+19
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo: The i.MX device tree updates for 3.17: - Add device tree sources and pin function header for i.MX6SX SoC - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio and GPIO key enabled - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos imx6dl boards, Rex Pro and Basic, Ka-Ro TX6 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board - Split M28EVK and M53EVK into SoM and EVK parts - A few correction around SDMA, SSI and SATA device nodes - Add eSATA support for Cubox-i board - Updates on edmqmx6 to enable PCIe, I2C and CAN - Use DT macro for clock ID for imx27 and imx6qdl - Add FlexCAN support for VF610 SoC * tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits) ARM: dts: vf610: add FlexCAN node ARM: dts: add initial Rex Basic board support ARM: dts: add initial Rex Pro board support ARM: dts: mx5: Split M53EVK into SoM and EVK parts ARM: dts: imx6: RIoTboard explicitly define pad settings ARM: dts: vf610: fix length of eshdc1 register property ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. ARM: dts: imx53: correct clock-names of SATA node ARM: imx6: Align ssi nodes between mx6 variants ARM: i.MX27 clk: dts: Use clock defines in DTS files ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx ARM: dts: imx6sx-sdb: Add audio support ARM: dts: imx6sx: Pass the fsl,fifo-depth property ARM: dts: imx6sx: Fix sdma node ARM: dts: imx6: edmqmx6: Add can bus ARM: dts: imx6: edmqmx6: Add two other i2c buses ARM: dts: imx6: edmqmx6: Add PCIe support ARM: dts: imx25-pdk: Add USB OTG support ARM: dts: i.MX53: add aipstz nodes ARM: dts: mxs: Split M28EVK into SoM and EVK parts ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: dts: add initial Rex Basic board supportRobert Nelson2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: add initial Rex Pro board supportRobert Nelson2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.George Joseph2014-07-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: imx6: add aristainetos board supportHeiko Schocher2014-07-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the imx6dl based aristainetos board with following configuration: CPU: Freescale i.MX6DL rev1.1 at 792 MHz DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB As this board can used with 2 different display types, the differences between them are extracted into 2 DTS files, and the common settings are collected in a common file. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: imx6: add support for Ka-Ro TX6 modulesLothar Waßmann2014-07-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are five distinct module types with either i.MX6Q or i.MX6DL and LVDS or LCD display interface and one DTS file for a complete system with an i.MX6DL based TX6 module and a baseboard mounted on the back of a display (imx6dl-tx6dl-comtft.dts). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: imx25: mbimxsd25: Add displays support.Denis Carikli2014-07-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added. Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboardAlexander Shiyan2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the cpuimx27 board from Eukrea and its baseboard. This change is intended to further remove non-DT support for this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| | * | | ARM: dts: imx: add initial imx6sx-sdb board supportShawn Guo2014-07-181-0/+1
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | Add initial imx6sx-sdb board support with limited devices enabled. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | Merge tag 'omap-for-v3.17/dt-part1' of ↵Olof Johansson2014-07-181-1/+3
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.17 merge window, part1" from Tony Lindgren: First set of .dts changes for omaps for v3.17 merge window: - Enable irqchip crossbar interrupt mapping. These changes are based on an immutable irqchip branch set up by Jason Cooper to make it easier to merge the related .dts changes. - Removal of omap2 related static clock data that now comes from device tree. - Enabling of PHY regulators for various omaps - Enabling of PCIe for dra7 - Add support for am437x starterkit - Enable audio for for omap5 - Enable display and am335x-evmsk * tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (43 commits) ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) ARM: DTS: omap5-uevm: Add node for twl6040 audio codec ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock ARM: dts: dra7: Add dt data for PCIe controller ARM: dts: dra7: Add dt data for PCIe PHY ARM: dts: dra7: Add dt data for PCIe PHY control module ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock ARM: dts: dra7-evm: Add regulator information to USB2 PHYs ARM: omap2plus_defconfig: enable TPS65218 configs ARM: dts: AM437x: Add TPS65218 device tree nodes ARM: dts: AM437x: Fix i2c nodes indentation ARM: dts: AM43x: Add TPS65218 device tree nodes ARM: dts: Add devicetree for Gumstix Pepper board ARM: dts: dra7: add crossbar device binding ARM: dts: dra7: add routable-irqs property for gic node ARM: OMAP24xx: clock: remove legacy clock data ... Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dts: Add devicetree for Gumstix Pepper boardAsh Charles2014-07-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the Gumstix Pepper[1] single-board computer based on the TI AM335x processor. Schematics are available [2]. [1] https://store.gumstix.com/index.php/products/344/ [2] https://pubs.gumstix.com/boards/PEPPER/ Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: dts: add support for AM437x StarterKitFelipe Balbi2014-07-011-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for TI's AM437x StarterKit Evaluation Module. Cc: Josh Elliot <jelliott@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Franklin Cooper Jr. <fcooper@ti.com> Tested-by: Tom Rini <trini@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: dts: Add hix5hd2-dkb dts file.Haifeng Yan2014-07-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add dts file for Hisilicon x5hd2 development kit board. Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> Signed-off-by: Jiancheng Xue <jchxue@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: Rename dts/dtsi to include hisi prefix] Signed-off-by: Olof Johansson <olof@lixom.net>
* | | Merge tag 's5pv210-dt' of ↵Arnd Bergmann2014-07-261-0/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim: - support common clock framework for s5pv210 clock - add generic PHY driver on s5pv210 to support it via DT - add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards - remove board files from mach-s5pv210 and unused codes - enable multiplatform for s5pv210 * tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: samsung: s5pv210: Remove legacy board support ARM: SAMSUNG: Remove remaining legacy code gpio: samsung: Remove legacy support of S5PV210 ARM: S5PV210: Enable multi-platform build support cpufreq: s5pv210: Make the driver multiplatform aware ARM: S5PV210: Register cpufreq platform device ARM: S5PV210: move debug-macro.S into the common space ARM: S5PV210: Untie PM support from legacy code ARM: S5PV210: Remove support for board files ARM: dts: Add Device tree for s5pc110/s5pv210 boards ARM: dts: Add Device tree for s5pv210 SoC ARM: S5PV210: Add board file for boot using Device Tree phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver clk: samsung: Add S5PV210 Audio Subsystem clock driver ARM: SAMSUNG: Remove legacy clock code serial: samsung: Remove support for legacy clock code cpufreq: s3c24xx: Remove some dead code ARM: S5PV210: Migrate clock handling to Common Clock Framework clk: samsung: Add clock driver for S5PV210 and compatible SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: dts: Add Device tree for s5pc110/s5pv210 boardsMateusz Krawczuk2014-07-191-0/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DTS for s5pc110 boards: goni, aquila, smdkc110 s5pv210: smdkv210, tiny210, torbreck Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [t.figa: Rebased, fixed merge conflicts, neatened.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | | Merge tag 'mvebu-soc-3.17-2' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson2014-07-191-4/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/soc Merge "ARM: mvebu SoC changes for v3.17 (round 2)" from Jason Cooper: "Yeah, it's just one patch, but it's a beautiful one! Thanks to the efforts of many people over the last couple years, and in particular, Andrew Lunn, Kirkwood has been completely converted to DT." - kirkwood * Remove mach-kirkwood/, It's fully supported in mach-mvebu/ * tag 'mvebu-soc-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: Kirkwood: Remove mach-kirkwood Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: Kirkwood: Remove mach-kirkwoodAndrew Lunn2014-07-131-4/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | Now that all boards have been converted to DT and all the support code lives in mach-mvebu, we can remove mach-kirkwood. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | | Merge tag 'renesas-r8a7779-multiplatform-for-v3.17' of ↵Olof Johansson2014-07-061-2/+2
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC r8a7779-multiplatform Updates for v3.17" from Simon Horman: Move r8a7779 SoC and its Marzen board to use common clocks, multiplatform and initialise SCIF (serial) devices using DT. * tag 'renesas-r8a7779-multiplatform-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (32 commits) ARM: shmobile: marzen: Do not use workaround for scif devices ARM: shmobile: marzen: Initialise SCIF devices using DT ARM: shmobile: marzen: Remove early_printk from command line ARM: shmobile: r8a7779: Add scif nodes to dtsi ARM: shmobile: r8a7779 dtsi: Correct #address-cells/#size-cells for clocks ARM: shmobile: r8a7779 dtsi: Update unit-addresses for clocks ARM: shmobile: r8a7779: Remove unused r8a7779_init_delay() ARM: shmobile: marzen-reference: Use DT CPU Frequency ARM: shmobile: r8a7779: Use DT CPU Frequency in common case ARM: shmobile: r8a7779: Add Maximum CPU Frequency to DTS ARM: shmobile: marzen-reference: Remove legacy clock support ARM: shmobile: Remove Marzen reference DTS ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB ARM: shmobile: Remove non-multiplatform Marzen reference support ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU ARM: shmobile: marzen-reference: Initialize CPG device ARM: shmobile: r8a7779: Initial multiplatform support ARM: shmobile: marzen-reference: Move clock and OF device initialisation into board code ARM: shmobile: r8a7779: Move r8a7779_earlytimer_init to clock-r8a7779.c ARM: shmobile: r8a7779: Add helper to read mode pins ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: shmobile: Let Marzen multiplatform boot with Marzen DTBSimon Horman2014-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the multiplatform Marzen support boot with the legacy DTS for Marzen as well as the Marzen reference DTS. Based on work for the Koelsch board by Laurent Pinchart. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | ARM: shmobile: Remove non-multiplatform Marzen reference supportSimon Horman2014-06-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that r8a7779 has CCF support remove the legacy Marzen reference Kconfig bits CONFIG_MACH_MARZEN_REFERENCE for the non-multiplatform case. Starting from this commit Marzen board support is always enabled via CONFIG_MACH_MARZEN, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-marzen.c and board-marzen-reference.c The file board-marzen-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used. Based on work for the Koelsch board by Laurent Pinchart. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | ARM: shmobile: r8a7779: Initial multiplatform supportSimon Horman2014-06-171-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Marzen and r8a7779 to CONFIG_SHMOBILE_MULTI. At this point CCF is not yet supported so you cannot run this code yet. For CCF support to happen several different components are needed, and this is one simple portion that moves us forward. Other patches need to build on top of this one. Marzen board support exists in 3 flavours: 1) SHMOBILE_MULTI, MACH_MARZEN - board-marzen-reference.c (CCF + DT) 2) SHMOBILE, MACH_MARZEN_REFERENCE - board-marzen-reference.c (DT) 3) SHMOBILE, MACH_MARZEN - board-marzen.c (legacy C code) When CCF is done then 2) will be removed. When 1) includes same features as 3) then 3) will be removed. Based on work for the Koelsch and r8a7791 by Magnus Damm. Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dtsLee Jones2014-06-191-1/+1
|/ | | | | | | | | | Two reasons for this rename. Firstly, it removes the camel case convention which isn't used by any other platform and secondly it matches the naming convention for the internal kernel, which can become annoying when flipping between the two. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* Merge tag 'dt-for-3.16' of ↵Linus Torvalds2014-06-021-43/+77
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
| * Merge tag 'samsung-dt-3' of ↵Olof Johansson2014-05-301-1/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung 3rd DT updates for v3.16" from Kukjin Kim: - add dts files support for new SoCs : exynos3250 SoC : exynos5260 SoC and exynos5260-xyref5260 board : exynos5410 SoC and exynos5410-smdk5410 board : exynos5800 SoC and exynos5800-peach-pi board - exynos4210-origen and exynos4412-origen : enable RTC and WDT nodes : use key code macros - exynos5250-arndale : use key code macros - exynos5420-arndale-octa : add secure firmware support - exynos5440 : update watchdog node name * tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410Tarek Dakhran2014-05-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board. Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * ARM: dts: add dts file for exynos5800-peach-pi boardArun Kumar K2014-05-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for google peach-pi board having the Exynos5800 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * ARM: dts: add dts file for exynos5260-xyref5260 boardRahul Sharma2014-05-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The patch adds the dts file for xyref5260 board which is based on exynos5260 SoC. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
OpenPOWER on IntegriCloud