summaryrefslogtreecommitdiffstats
path: root/Documentation
Commit message (Collapse)AuthorAgeFilesLines
* docbook: update procfs creditsRandy Dunlap2008-10-162-35/+14
| | | | | | | | | Update Erik Mouw's email address & affiliation in DocBook. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Erik Mouw <mouw@nl.linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uvesafb: document mode to mode_option parameter changeMike Pagano2008-10-161-2/+2
| | | | | | | | | | Document the change from the old "mode" parameter to the "mode_option" parameter. Signed-off-by: Mike Pagano <mpagano@gentoo.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* intelfb: support 945GME (as used in ASUS Eee 901)Phil Endecott2008-10-161-0/+1
| | | | | | | | | | | | | | | | | | Add support for Intel's 945GME graphics chip to the intelfb driver. I have assumed that the 945GME is identical to the already-supported 945GM apart from its PCI IDs; this is based on a quick look at the X driver for these chips which seems to treat them identically. The 945GME is used in the ASUS Eee 901, and I coded this in the hope that I'd be able to use it to get a console at the native 1024x600 resolution which is not known to the BIOS. I realised too late that the intelfb driver does not support mode changing on laptops, so it won't be any use for me. Signed-off-by: Phil Endecott <spam_from_intelfb@chezphil.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* viafb: viafb.modes, viafb.txtJoseph Chan2008-10-162-0/+1084
| | | | | | | | | | | | | Correct via_fb_ to viafb_ and remove the Kconfig part in viafb.txt. viafb.modes: supported mode table viafb.txt: documentation of viafb driver Signed-off-by: Joseph Chan <josephchan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: request/free hooksDavid Brownell2008-10-161-0/+4
| | | | | | | | | | | | | Add a new internal mechanism to gpiolib to support low power operations by letting gpio_chip instances see when their GPIOs are in use. When no GPIOs are active, chips may be able to enter lower powered runtime states by disabling clocks and/or power domains. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Magnus Damm" <magnus.damm@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: gpio_to_irq() hooksDavid Brownell2008-10-161-2/+3
| | | | | | | | | | | | | | Add a new gpiolib mechanism: gpio_chip instances can provide mappings between their (input) GPIOs and any associated IRQs. This makes it easier for platforms to support IRQs that are provided by board-specific external chips instead of as part of their core (such as SOC-integrated GPIOs). Also update the irq_to_gpio() description, saying to avoid it because it's not always supported. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* autofs4: device node ioctl documentationIan Kent2008-10-161-0/+393
| | | | | | | | Add documentation for the miscellaneous device module of autofs4. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pxa2xx_spi: fix chip_info defaults and documentation.Vernon Sauder2008-10-161-11/+23
| | | | | | | | | | | | | | | Make the chip info structure data optional by providing reasonable defaults. Improve corresponding documentation, and highlight the drawback of not providing explicit chipselect control. DMA can determine appropriate dma_burst_size and thresholds automatically so use DMA even if dma_burst_size is not specified. Signed-off-by: Vernon Sauder <VernonInHand@gmail.com> Reviewed-by: Ned Forrester <nforrester@whoi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* SubmittingPatches: add a reference to Andi's OLS paperAndi Kleen2008-10-161-0/+5
| | | | | | | | | | For this year's OLS I wrote a paper on successfull strategies to submit difficult kernel patches. Add a reference to it to SubmittingPatches. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Document panic_on_unrecovered_nmi sysctlBernhard Walle2008-10-161-0/+12
| | | | | | | | | | This adds "panic_on_unrecovered_nmi" sysctl to Documentation/filesystems/proc.txt. The text is mainly taken from http://readlist.com/lists/vger.kernel.org/linux-kernel/43/217998.html. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove Andrew Morton's http://www.zip.com.au/~akpm/FD Cami2008-10-164-11/+5
| | | | | | | | | | | | | | | Remove Andrew Morton's http://www.zip.com.au/~akpm/ urls, update to new ones when necessary, delete references otherwise. There are still instances of that living in: Documentation/zh_CN/HOWTO Documentation/zh_CN/SubmittingPatches Documentation/ko_KR/HOWTO Documentation/ja_JP/SubmittingPatches Signed-off-by: Francois Cami <francois.cami@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove Andrew Morton's old email accountsFrancois Cami2008-10-165-9/+9
| | | | | | | | | People can use the real name an an index into MAINTAINERS to find the current email address. Signed-off-by: Francois Cami <francois.cami@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* documentation: explain memory barriersRandy Dunlap2008-10-161-0/+3
| | | | | | | | We want all uses of memory barriers to be explained in the source code. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dontdiff: more updates to be closer to gitignoreRandy Dunlap2008-10-161-26/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | defkeymap.c_shipped should be diffed if it is changed. Reported-by: Mike Galbraith <efault@gmx.de> COPYING, CREDITS, .mailmap should be diffed if they are changed. keywords.c_shipped & lex.c_shipped should be diffed when changed. parse.[ch]_shipped should be diffed when changed. Reported-by: Sam Ravnborg <sam@ravnborg.org> vsyscall* updates from a .gitignore patch by "Denis V. Lunev" <den@openvz.org>. *.so.dbg from a .gitignore patch by Thomas Gleixner <tglx@linutronix.de>. binoffset from a .gitignore patch by Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com>. Module.markers from a .gitignore patch by Matthew Wilcox <willy@linux.intel.com>. vmlinux*.lds* should be diffed if changed. Reported-by: Etienne Lorrain <etienne_lorrain@yahoo.fr> vmlinux.lds from a .gitignore patch by Daniel Guilak <daniel@danielguilak.com>. *.scr should be diffed if changed. Lots of updates from http://lkml.org/lkml/2008/5/20/32 Reported-by: Bart Van Assche <bart.vanassche@gmail.com> Use ncscope.* instead of *cscope* since the latter may catch too many files. Add *.elf, from a .gitignore patch by Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>. Make firmware entries match .gitignore entries. Make some entries less greedy by removing trailing '*'. Remove "make_times_h" (no such file). Remove "filelist" (no such file). Remove "dummy_sym.c" (no such file). Remove "gen-kdb_cmds.c" (no such file). Remove "gentbl" (no such file). Remove "kconfig.tk" (no such file). Remove "tkparse" (no such file). Remove "sim710_d.h" (no such file). Remove "53c8xx_d.h" (no such file). Add "syscalltab.h" (generated file). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* doc: typo in Documentation/filesystems/nfsroot.txtShane McDonald2008-10-161-1/+1
| | | | | | | | | Add a missing word to the explanation of the purpose of the zdisk and bzdisk make targets. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* profiling: dynamically enable readprofile at runtimeDave Hansen2008-10-161-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Way too often, I have a machine that exhibits some kind of crappy behavior. The CPU looks wedged in the kernel or it is spending way too much system time and I wonder what is responsible. I try to run readprofile. But, of course, Ubuntu doesn't enable it by default. Dang! The reason we boot-time enable it is that it takes a big bufffer that we generally can only bootmem alloc. But, does it hurt to at least try and runtime-alloc it? To use: echo 2 > /sys/kernel/profile Then run readprofile like normal. This should fix the compile issue with allmodconfig. I've compile-tested on a bunch more configs now including a few more architectures. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vsprintf: use new vsprintf symbolic function pointer formatBjorn Helgaas2008-10-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Use the '%pF' format to get rid of an "#ifdef DEBUG" and make some printks atomic. This removes the last in-tree uses of print_fn_descriptor_symbol(). I marked print_fn_descriptor_symbol() deprecated and scheduled it for removal next year to give time for out-of-tree modules to be updated. parisc's print_fn_descriptor_symbol() is currently broken there (it needs to dereference the function pointer similar to ia64 and power). This patch shouldn't make anything worse, but it means we need to fix dereference_function_descriptor() instead of print_fn_descriptor_symbol() to get meaningful initcall_debug output. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fix random typosDanny ter Haar2008-10-162-5/+6
| | | | | | | | | Signed-off-by: Danny ter Haar <dth@cistron.nl> Cc: Patrick McHardy <kaber@trash.net> Cc: Mikael Starvik <starvik@axis.com> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix Documentation/filesystems/ramfs-rootfs-initramfs.txtfrans2008-10-161-1/+1
| | | | | | | | | | First a file hello.c is created, then the file hello2.c is compiled. Change this to hello.c Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm: document use of RTC in pm_traceFrans Pop2008-10-161-0/+18
| | | | | | | | | | | As pm_trace uses the system's hardware clock to save its magic value, users of that option should be warned that using this debug option will result in an incorrect system time after resume. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'next' of ↵Linus Torvalds2008-10-157-158/+114
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
| * Merge commit 'origin'Benjamin Herrenschmidt2008-10-1565-943/+2016
| |\ | | | | | | | | | | | | | | | Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
| * | powerpc: document the "fsl,ssi-dma-channel" compatible propertyTimur Tabi2008-10-132-8/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "fsl,ssi-dma-channel" compatible property is used to specify a DMA channel on the Freescale Elo DMA controller that should be used exclusively by the Freescale SSI audio controller. When a property is marked as such, the Elo DMA driver will ignore it, and so it will be available for the sound drivers. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.John Rigby2008-10-131-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify mpc83xx_add_bridge to get config space register base address from the device tree instead of immr + hardcoded offset. 83xx pci nodes have this change: register properties now contain two address length tuples: First is the pci bridge register base, this has always been there. Second is the config base, this is new. This is documented in dts-bindings/fsl/83xx-512x-pci.txt The changes accomplish these things: mpc83xx_add_bridge no longer needs to call get_immrbase it uses hard coded addresses if the second register value is missing Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc: Remove outdated Documentation/powerpc/smp.txtGeert Uytterhoeven2008-10-072-36/+0
| | | | | | | | | | | | | | | | | | | | | | | | Documentation/powerpc/smp.txt is so outdated that it makes sense to just remove it. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Remove remains of /proc/ppc_htabGeert Uytterhoeven2008-10-072-120/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 14cf11af6cf608eb8c23e989ddb17a715ddce109 ("powerpc: Merge enough to start building in arch/powerpc.") unwired /proc/ppc_htab, and commit 917f0af9e5a9ceecf9e72537fabb501254ba321d ("powerpc: Remove arch/ppc and include/asm-ppc") removed the rest of the /proc/ppc_htab support, but there are still a few references left. Kill them for good. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: gpio driver for mpc8349/8572/8610 and compatiblePeter Korsgaard2008-09-231-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | Structured similar to the existing QE GPIO support. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc: add SSI-to-DMA properties to Freescale MPC8610 HPCD device treeTimur Tabi2008-09-171-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the fsl,playback-dma and fsl,capture-dma properties to the Freescale MPC8610 HPCD device tree. These properties connect the SSI nodes to the DMA nodes for the DMA channels that the SSI should use. Also update the ssi.txt documentation. These properties will be needed when the ASoC V2 version of the Freescale MPC8610 device drivers are merged into the mainline. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2008-10-144-31/+95
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-viapro: Add support for SMBus Process Call transactions i2c: Restore i2c_smbus_process_call function i2c: Do earlier driver model init i2c: Only build Tyan SMBus mux drivers on x86 i2c: Guard against oopses from bad init sequences i2c: Document the implementation details of the /dev interface i2c: Improve dev-interface documentation i2c-parport-light: Don't register a platform device resource hwmon: (dme1737) Convert to a new-style i2c driver hwmon: (dme1737) Be less i2c-centric i2c/tps65010: Vibrator hookup to gpiolib i2c-viapro: Add VX800/VX820 support i2c: Renesas Highlander FPGA SMBus support i2c-pca-isa: Don't grab arbitrary resources i2c/isp1301_omap: Convert to a new-style i2c driver, part 2 i2c/isp1301_omap: Convert to a new-style i2c driver, part 1
| * | | i2c: Restore i2c_smbus_process_call functionPrakash Mortha2008-10-142-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restore the i2c_smbus_process_call() as one driver (for the Micronas MAP5401) will need it soon. [JD: Update documentation accordingly.] Signed-off-by: Prakash Mortha <pmortha@escient.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | i2c: Document the implementation details of the /dev interfaceJean Delvare2008-10-141-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I wrote this explanation to answer a question on the i2c mailing list, and thought it would be good to have in the kernel documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | i2c: Improve dev-interface documentationJean Delvare2008-10-141-25/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Clarify some points. * Point developers to i2c-tools instead of lm_sensors. * Fix coding style in code examples. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | i2c-viapro: Add VX800/VX820 supportRudolf Marek2008-10-141-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks to new datasheets published on http://linux.via.com.tw we can now add support for VX800/VX820 chipsets. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2008-10-141-0/+7
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits) HID: build drivers for all quirky devices by default HID: add missing blacklist entry for Apple ATV ircontrol HID: add support for Bright ABNT2 brazilian device HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers HID: fix numlock led on Dell device 0x413c/0x2105 HID: remove warn() macro from usb hid drivers HID: remove info() macro from usb HID drivers HID: add appletv IR receiver quirk HID: fix a lockup regression when using force feedback on a PID device HID: hiddev.h: Fix example code. HID: hiddev.h: Fix mixed space and tabs in example code. HID: convert to dev_* prints HID: remove hid-ff HID: move zeroplus FF processing HID: move thrustmaster FF processing HID: move pantherlord FF processing HID: fix incorrent length condition in hidraw_write() HID: fix tty<->hid deadlock HID: ignore iBuddy devices HID: report descriptor fix for remaining MacBook JIS keyboards ...
| * | | | HID: add compat supportJiri Slaby2008-10-141-0/+7
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add compat option to hid code to allow loading of all modules on systems which don't allow autoloading because of old userspace. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge branch 'upstream-linus' of ↵Linus Torvalds2008-10-141-0/+6
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits) ocfs2: Make cached block reads the common case. ocfs2: Kill the last naked wait_on_buffer() for cached reads. ocfs2: Move ocfs2_bread() into dir.c ocfs2: Simplify ocfs2_read_block() ocfs2: Require an inode for ocfs2_read_block(s)(). ocfs2: Separate out sync reads from ocfs2_read_blocks() ocfs2: Refactor xattr list and remove ocfs2_xattr_handler(). ocfs2: Calculate EA hash only by its suffix. ocfs2: Move trusted and user attribute support into xattr.c ocfs2: Uninline ocfs2_xattr_name_hash() ocfs2: Don't check for NULL before brelse() ocfs2: use smaller counters in ocfs2_remove_xattr_clusters_from_cache ocfs2: Documentation update for user_xattr / nouser_xattr mount options ocfs2: make la_debug_mutex static ocfs2: Remove pointless !! ocfs2: Add empty bucket support in xattr. ocfs2/xattr.c: Fix a bug when inserting xattr. ocfs2: Add xattr mount option in ocfs2_show_options() ocfs2: Switch over to JBD2. ocfs2: Add the 'inode64' mount option. ...
| * | | ocfs2: Documentation update for user_xattr / nouser_xattr mount optionsMark Fasheh2008-10-131-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Mark Fasheh <mfasheh@suse.com>
| * | | ocfs2: Add the 'inode64' mount option.Joel Becker2008-10-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that ocfs2 limits inode numbers to 32bits, add a mount option to disable the limit. This parallels XFS. 64bit systems can handle the larger inode numbers. [ Added description of inode64 mount option in ocfs2.txt. --Mark ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2008-10-143-99/+104
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (26 commits) mfd: Fix warning in WM8350 mfd: Add placeholders for WM8350 client devices da903x: add regulator support for DA9030/DA9034 mfd: Add WM8350 subdevice registration helper regulator: Add WM8350 regulator support mfd: Add WM8350 interrupt support mfd: Add initialisation callback for WM8350 mfd: Add GPIO pin configuration support for WM8350 mfd: Add I2C control support for WM8350 mfd: Core support for the WM8350 AudioPlus PMIC mfd: Add WM8350 watchdog register definitions mfd: Add WM8350 RTC register definitions mfd: Add WM8350 comparator register definitions mfd: Add WM8350 PMU register definitions mfd: Add WM8350 PMIC register definitions mfd: Add WM8350 GPIO register definitions mfd: Add WM8350 audio register definitions regulator: Export regulator name via sysfs regulator: Add WM8400 regulator support mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU ...
| * | | regulator: Export regulator name via sysfsMark Brown2008-10-131-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a new file 'name' in the regulator sysfs class with a human readable name for the regulator for use in applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | | regulator: update email address for Liam GirdwoodLiam Girdwood2008-10-131-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | Additionally added another web resource for voltage regulators. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | | regulator: core - Rework machine API to remove string based functions.Liam Girdwood2008-10-132-78/+70
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This improves the machine level API in order to configure regulator constraints and consumers as platform data and removes the old string based API that required several calls to set up each regulator. The intention is to create a struct regulator_init_data, populate it's fields with constraints, consumers devices, etc and then register the regulator device from board.c in the standard Linux way. e.g. regulator LDO2 (supplying codec and sim) platform data. /* regulator LDO2 consumer devices */ static struct regulator_consumer_supply ldo2_consumers[] = { { .dev = &platform_audio_device.dev, .supply = "codec_avdd", }, { .dev = &platform_sim_device.dev, .supply = "sim_vcc", } }; /* regulator LDO2 constraints */ static struct regulator_init_data ldo2_data = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), .consumer_supplies = ldo2_consumers, }; /* machine regulator devices with thier consumers and constraints */ static struct platform_device wm8350_regulator_devices[] = { { .name = "wm8350-regulator", .id = WM8350_LDO_2, .dev = { .platform_data = &ldo2_data, }, }, }; Changes in detail:- o Removed all const char* regulator config functions in machine API. o Created new struct regulator_init_data to contain regulator machine configuration constraints and consmuers. o Changed set_supply(), set_machine_constraints(), set_consumer_device_supply() to remove their string identifier parameters. Also made them static and moved functions nearer top of core.c. o Removed no longer used inline func to_rdev() o Added regulator_get_init_drvdata() to retrieve init data. o Added struct device* as parameter to regulator_register(). o Changed my email address. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2008-10-131-0/+149
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits) ata: Add documentation for hard disk shock protection interface (v3) ide: Implement disk shock protection support (v4) ide-cd: fix printk format warning piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list ide-atapi: assign taskfile flags per device type ide-cd: move cdrom_info.dma to ide_drive_t.dma ide: add ide_drive_t.dma flag ide-cd: add a debug_mask module parameter ide-cd: convert driver to new ide debugging macro (v3) ide: move SFF DMA code to ide-dma-sff.c ide: cleanup ide-dma.c ide: cleanup ide_build_dmatable() ide: remove needless includes from ide-dma.c ide: switch to DMA-mapping API part #2 ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: __ide_dma_end() -> ide_dma_end() pmac: remove needless pmac_ide_destroy_dmatable() wrapper pmac: remove superfluous pmif == NULL checks ide: Two fixes regarding memory allocation ...
| * | | ata: Add documentation for hard disk shock protection interface (v3)Elias Oltmanns2008-10-131-0/+149
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Put some information (and pointers to more) into the kernel's doc tree, describing briefly the interface to the kernel's disk head unloading facility. Information about how to set up a complete shock protection system under GNU/Linux can be found on the web and is referenced accordingly. v3: Here is some final polish including various spelling corrections pointed out by Grant Grundler and Peter Moulder. Also, I have added some information about the timing constraints related to disk head parking. The patch looks more impressive than it really is and I think it would be alright just to incorporate it into the original patch so as not to clutter up the git log. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds2008-10-131-0/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
| * | | pcmcia: add pcmcia_loop_config() helperDominik Brodowski2008-08-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By calling pcmcia_loop_config(), a pcmcia driver can iterate over all available configuration options. During a driver's probe() phase, one doesn't need to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and pcmcia_parse_tuple directly in most if not all cases. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* | | | Merge branch 'for_linus' of ↵Linus Torvalds2008-10-139-4/+180
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits) V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default. V4L/DVB (9183): S2API: Return error of the caller provides 0 commands. V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP V4L/DVB (9179): S2API: frontend.h cleanup V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO. V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16 V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator. V4L/DVB (9175): Remove NULL pointer in stb6000 driver. V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator. V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API. V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API. V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod. V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams. V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote V4L/DVB: v4l2-dev: remove duplicated #include ...
| * | | V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cardsOleg Roitburd2008-10-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added support for Prof 7300 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Steven Toth <stoth@linuxtv.org> [mchehab@redhat.com: fixed CARDLIST.cx88 entry] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (9113): saa7134: fixes for the Asus Tiger Revision 1.00Hermann Pitton2008-10-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In opposite to the P7131 Dual this early OEM card has a male radio antenna connector and also no remote. We currently switch the DVB-T RF feed to the radio input, like on the P7131 with female radio connector used also for DVB-T and should improve this. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (9091): gspca: Subdriver m5602 (ALi) added.Erik Andren2008-10-122-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the ALi m5602 usb bridge and is based on the gspca framework. It contains code for communicating with 5 different sensors: OmniVision OV9650, Pixel Plus PO1030, Samsung S5K83A, S5K4AA and finally Micron MT9M111. Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> [mchehab@redhat.com: fix m5602/Makefile] [mchehab@redhat.com: extern debug caused conflicts. Renamed to m5602_debug] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud