summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/media
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'media/v4.19-1' of ↵Linus Torvalds2018-08-1512-75/+264
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ...
| * media: dt-bindings: media: qcom,camss: Add 8996 bindingsTodor Tomov2018-08-021-6/+38
| | | | | | | | | | | | | | | | | | | | | | | | Update binding document for MSM8996. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: qcom,camss: Fix whitespacesTodor Tomov2018-08-021-46/+46
| | | | | | | | | | | | | | | | | | | | | | | | Use tabs. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: qcom, camss: Unify the clock namesTodor Tomov2018-08-021-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use more logical clock names - similar to the names in documentation. This will allow better handling of the clocks in the driver when support for more hardware versions is added - equivalent clocks on different hardware versions will have the same name. Note: No dts is using this device (and clock names) yet. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: ov2680: dt: Add bindings for OV2680Rui Miguel Silva2018-07-271-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | Add device tree binding documentation for the OV2680 camera sensor. [Sakari Ailus: Squash MAINTAINERS entry from Rui] CC: devicetree@vger.kernel.org Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: i2c: Document MT9V111 bindingsJacopo Mondi2018-07-271-0/+46
| | | | | | | | | | | | | | | | | | Add documentation for Aptina MT9V111 image sensor. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: venus: core: add sdm845 DT compatible and resource dataStanimir Varbanov2018-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds sdm845 DT compatible string with it's resource data table. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: cec-gpio.txt: add v5-gpios for testing the 5V lineHans Verkuil2018-07-251-8/+14
| | | | | | | | | | | | | | | | | | In order to debug the HDMI 5V line we need to add a new v5-gpios property. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: rcar-vin: Add 'data-enable-active'Jacopo Mondi2018-07-241-0/+2
| | | | | | | | | | | | | | | | | | | | Describe optional endpoint property 'data-enable-active' for R-Car VIN. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: Document data-enable-active propertyJacopo Mondi2018-07-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 'data-enable-active' property to endpoint node properties list. The property allows to specify the polarity of the data-enable signal, which when in active state determinates when data lines have to sampled for valid pixel data. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: rcar-vin: Describe optional ep propertiesJacopo Mondi2018-07-241-0/+17
| | | | | | | | | | | | | | | | | | | | | | Describe the optional endpoint properties for endpoint nodes of the R-Car VIN interface device tree bindings documentation. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: rcar-vin: Align Gen2 and Gen3Jacopo Mondi2018-07-241-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | Align description of the Gen2 and Gen3 bindings for parallel input. This commit prepares for description of optional endpoint properties in ports subnodes accepting parallel video connections. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: rcar-vin: Add R8A77995 supportJacopo Mondi2018-07-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by rcar-vin driver. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: Add bindings for AKM ak7375 voice coil lensBingbu Cao2018-07-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | Add device tree bindings for AKM ak7375 voice coil lens driver. This chip is used to drive a lens in a camera module. Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: Add bindings for Dongwoon DW9807 voice coilAlan Chiang2018-06-281-0/+9
| | | | | | | | | | | | | | | | | | | | Dongwoon DW9807 is a voice coil lens driver. Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: ov5640: Add "rotation" propertyHugues Fruchet2018-06-281-0/+5
| | | | | | | | | | | | | | | | | | | | Add the rotation property to the list of optional properties for the OV5640 camera sensor. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: smia: Add "rotation" propertySakari Ailus2018-06-281-0/+3
| | | | | | | | | | | | | | | | | | | | Add the rotation property to list of optional properties for the smia sensors. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: Define "rotation" property for sensorsSakari Ailus2018-06-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sensors are occasionally mounted upside down to systems such as mobile phones or tablets. In order to use such a sensor without having to turn every image upside down, most camera sensors support reversing the readout order by setting both horizontal and vertical flipping. This patch documents the "rotation" property for camera sensors, mirroring what is defined for displays in Documentation/devicetree/bindings/display/panel/panel.txt . Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: rcar_vin: fix style for ports and endpointsNiklas Söderlund2018-06-281-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | The style for referring to ports and endpoint are wrong. Refer to them using lowercase and a unit address, port@x and endpoint@x. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt-bindings: media: rcar_vin: add support for r8a77965Niklas Söderlund2018-06-281-0/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: rcar-vin: Drop unnecessary register properties from example vin portSimon Horman2018-06-281-3/+0
| | | | | | | | | | | | | | | | | | | | | | The example vin port node does not have an address and thus does not need address-cells or address size-properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: dt: bindings: tegra-vde: Document new optional Memory Client reset ↵Dmitry Osipenko2018-06-281-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | property Recently binding of the Memory Controller has been extended, exposing the Memory Client reset controls and hence it is now a reset controller. Tegra video-decoder device is among the Memory Controller reset users, document the new optional VDE HW reset property. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | dt-bindings: remove 'interrupt-parent' from bindingsRob Herring2018-07-252-2/+1
|/ | | | | | | | | | | | 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
* devicetree: fix name of pinctrl-bindings.txtMauro Carvalho Chehab2018-06-151-1/+1
| | | | | | | | | | Rename: pinctrl-binding.txt -> pinctrl-bindings.txt In order to match the current name of this file. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
* media: dt-bindings: ov772x: add device tree bindingAkinobu Mita2018-05-281-0/+40
| | | | | | | | | | | | | | | This adds a device tree binding documentation for OV7720/OV7725 sensor. Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Rob Herring <robh+dt@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentationNiklas Söderlund2018-05-281-0/+101
| | | | | | | | | | | | | | | | | | | | Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers are located between the video sources (CSI-2 transmitters) and the video grabbers (VIN) on Gen3 of Renesas R-Car SoC. Each CSI-2 device is connected to more than one VIN device which simultaneously can receive video from the same CSI-2 device. Each VIN device can also be connected to more than one CSI-2 device. The routing of which links are used is controlled by the VIN devices. There are only a few possible routes which are set by hardware limitations, which are different for each SoC in the Gen3 family. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dt-bindings: media: Binding document for OV7251 camera sensorTodor Tomov2018-05-171-0/+52
| | | | | | | | | | | | Add the document for ov7251 device tree binding. CC: Rob Herring <robh@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dt-bindings: media: Add Cadence MIPI-CSI2 TX Device Tree bindingsMaxime Ripard2018-05-161-0/+98
| | | | | | | | | | | | | | | | The Cadence MIPI-CSI2 TX controller is a CSI2 bridge that supports up to 4 video streams and can output on up to 4 CSI-2 lanes, depending on the hardware implementation. It can operate with an external D-PHY, an internal one or no D-PHY at all in some configurations. Acked-by: Benoit Parrot <bparrot@ti.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dt-bindings: media: Add Cadence MIPI-CSI2 RX Device Tree bindingsMaxime Ripard2018-05-161-0/+100
| | | | | | | | | | | | | | | | | The Cadence MIPI-CSI2 RX controller is a CSI2RX bridge that supports up to 4 CSI-2 lanes, and can route the frames to up to 4 streams, depending on the hardware implementation. It can operate with an external D-PHY, an internal one or no D-PHY at all in some configurations. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dt-bindings: media: renesas-ceu: Add R-Mobile R8A7740Jacopo Mondi2018-05-111-3/+4
| | | | | | | | | | Add R-Mobile A1 R8A7740 SoC to the list of compatible values for the CEU unit. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-vin: remove generic gen3 compatible stringNiklas Söderlund2018-05-051-1/+0
| | | | | | | | | | | | | The compatible string "renesas,rcar-gen3-vin" was added before the Gen3 driver code was added but it's not possible to use. Each SoC in the Gen3 series require SoC specific knowledge in the driver to function. Remove it before it is added to any device tree descriptions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dt-bindings: Add bindings for panasonic,amg88xxMatt Ranostay2018-05-041-0/+19
| | | | | | | | | | | Define the device tree bindings for the panasonic,amg88xx i2c video driver. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: rcar-vin: add Gen3 devicetree bindings documentationNiklas Söderlund2018-04-201-12/+106
| | | | | | | | | | | | | | | | | Document the devicetree bindings for the CSI-2 inputs available on Gen3. There is a need to add a custom property 'renesas,id' and to define which CSI-2 input is described in which endpoint under the port@1 node. This information is needed since there are a set of predefined routes between each VIN and CSI-2 block. This routing table will be kept inside the driver but in order for it to act on it it must know which VIN and CSI-2 is which. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]Fabrizio Castro2018-04-201-1/+4
| | | | | | | | | | | | | | | | | | | Add compatible strings for r8a7743 and r8a7745. No driver change is needed as "renesas,rcar-gen2-vin" will activate the right code. However, it is good practice to document compatible strings for the specific SoC as this allows SoC specific changes to the driver if needed, in addition to document SoC support and therefore allow checkpatch.pl to validate compatible string values. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: rcar_vin: Reverse SoC part number listFabrizio Castro2018-04-201-7/+7
| | | | | | | | | | | | | | | Change the sorting of the part numbers from descending to ascending to match with other documentation. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: s5p-mfc: Adding initial support for MFC v10.10Smitha T Murthy2018-03-221-0/+1
| | | | | | | | | | | | Adding the support for MFC v10.10, with new register file and necessary hw control, decoder, encoder and structural changes. Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: rcar_vin: Use status "okay"Geert Uytterhoeven2018-03-221-2/+2
| | | | | | | | | | | According to the Devicetree Specification, "ok" is not a valid status. Fixes: 47c71bd61b772cd7 ("[media] rcar_vin: add devicetree support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: adv7604: Extend bindings to allow specifying ↵Jean-Michel Hautbois2018-03-211-2/+16
| | | | | | | | | | | | | | | | | | | | | slave map addresses The ADV7604 has thirteen 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Extend the device tree node bindings to be able to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. [Kieran: Re-adapted for mainline] Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt: bindings: Update binding documentation for sunxi IR controllerPhilipp Rossak2018-03-211-0/+3
| | | | | | | | | | | | This patch updates documentation for Device-Tree bindings for sunxi IR controller and adds the new optional property for the base clock frequency. Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: Add document file for CXD2880 SPI I/FYasunari Takiguchi2018-03-071-0/+14
| | | | | | | | | | | | | | This is the document file for Sony CXD2880 DVB-T2/T tuner + demodulator. It contains the description of the SPI adapter binding. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: Add Renesas CEU bindingsJacopo Mondi2018-02-261-0/+81
| | | | | | | | | | Add bindings documentation for Renesas Capture Engine Unit (CEU). Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: coda: Add compatible for CodaHx4 on i.MX51Philipp Zabel2018-02-261-2/+3
| | | | | | | | | Add a compatible for the CodaHx4 VPU used on i.MX51. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: Add OF properties to ov7670Jacopo Mondi2018-02-231-2/+14
| | | | | | | | | | | | | | | Describe newly introduced OF properties for ov7670 image sensor. The driver supports two standard properties to configure synchronism signals polarities and one custom property already supported as platform data options to suppress pixel clock during horizontal blankings. Re-phrase child nodes description while at there. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ov9650: add device tree bindingAkinobu Mita2018-02-231-0/+36
| | | | | | | | | | | | | | | | Now the ov9650 driver supports device tree probing. So this adds a device tree binding documentation. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Hugues Fruchet <hugues.fruchet@st.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: Add bindings for OV2685Shunqian Zheng2018-02-231-0/+41
| | | | | | | | | Add device tree binding documentation for the OV2685 sensor. Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: media: Add bindings for OV5695Shunqian Zheng2018-02-231-0/+41
| | | | | | | | | Add device tree binding documentation for the OV5695 sensor. Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt-bindings: Add bindings for TDA1997XTim Harvey2018-02-221-0/+178
| | | | | | | | | | | Define the device tree bindings for the TDA1997X. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: make a proper commit message] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Merge tag 'media/v4.16-2' of ↵Linus Torvalds2018-02-067-4/+163
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...
| * media: dt-bindings/media/cec-gpio.txt: mention the CEC/HPD max voltagesHans Verkuil2018-01-231-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Mention the maximum voltages of the CEC and HPD lines. Since in the example these lines are connected to a Raspberry Pi and the Rpi GPIO lines are 3.3V it is a good idea to warn against directly connecting the HPD to the Raspberry Pi's GPIO line. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> # for v4.15 Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: dt-bindings: ov5640: refine CSI-2 and add parallel interfaceHugues Fruchet2018-01-051-2/+44
| | | | | | | | | | | | | | | | | | Refine CSI-2 endpoint documentation and add bindings for DVP parallel interface support. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
OpenPOWER on IntegriCloud