summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* xen: avoid early crash of memory limited dom0Juergen Gross2015-09-081-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b1c9f169047b ("xen: split counting of extra memory pages...") introduced an error when dom0 was started with limited memory. The problem arises in case dom0 is started with initial memory and maximum memory being the same and exactly a multiple of 1 GB. The kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. In this case it will crash very early during boot due to the virtual mapped p2m list not being large enough to be able to remap any memory: (XEN) Freed 304kB init memory. mapping kernel into physical memory about to get started... (XEN) traps.c:459:d0v0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] (XEN) domain_crash_sync called from entry.S: fault at ffff82d080229a93 create_bounce_frame+0x12b/0x13a (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.5.2-pre x86_64 debug=n Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff81d120cb>] (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (d0v0) (XEN) rax: ffffffff81db2000 rbx: 000000004d000000 rcx: 0000000000000000 (XEN) rdx: 000000004d000000 rsi: 0000000000063000 rdi: 000000004d063000 (XEN) rbp: ffffffff81c03d78 rsp: ffffffff81c03d28 r8: 0000000000023000 (XEN) r9: 00000001040ff000 r10: 0000000000007ff0 r11: 0000000000000000 (XEN) r12: 0000000000063000 r13: 000000000004d000 r14: 0000000000000063 (XEN) r15: 0000000000000063 cr0: 0000000080050033 cr4: 00000000000006f0 (XEN) cr3: 0000000105c0f000 cr2: ffffc90000268000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81c03d28: (XEN) 0000000000000000 0000000000000000 ffffffff81d120cb 000000010000e030 (XEN) 0000000000010006 ffffffff81c03d68 000000000000e02b ffffffffffffffff (XEN) 0000000000000063 000000000004d063 ffffffff81c03de8 ffffffff81d130a7 (XEN) ffffffff81c03de8 000000000004d000 00000001040ff000 0000000000105db1 (XEN) 00000001040ff001 000000000004d062 ffff8800092d6ff8 0000000002027000 (XEN) ffff8800094d8340 ffff8800092d6ff8 00003ffffffff000 ffff8800092d7ff8 (XEN) ffffffff81c03e48 ffffffff81d13c43 ffff8800094d8000 ffff8800094d9000 (XEN) 0000000000000000 ffff8800092d6000 00000000092d6000 000000004cfbf000 (XEN) 00000000092d6000 00000000052d5442 0000000000000000 0000000000000000 (XEN) ffffffff81c03ed8 ffffffff81d185c1 0000000000000000 0000000000000000 (XEN) ffffffff81c03e78 ffffffff810f8ca4 ffffffff81c03ed8 ffffffff8171a15d (XEN) 0000000000000010 ffffffff81c03ee8 0000000000000000 0000000000000000 (XEN) ffffffff81f0e402 ffffffffffffffff ffffffff81dae900 0000000000000000 (XEN) 0000000000000000 0000000000000000 ffffffff81c03f28 ffffffff81d0cf0f (XEN) 0000000000000000 0000000000000000 0000000000000000 ffffffff81db82e0 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) ffffffff81c03f38 ffffffff81d0c603 ffffffff81c03ff8 ffffffff81d11c86 (XEN) 0300000100000032 0000000000000005 0000000000000020 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) Domain 0 crashed: rebooting machine in 5 seconds. This can be avoided by allocating aneough space for the p2m to cover the maximum memory of dom0 plus the identity mapped holes required for PCI space, BIOS etc. Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* arm/xen: Remove helpers which are PV specificJulien Grall2015-08-201-14/+2
| | | | | | | | | | | | | | | | | ARM guests are always HVM. The current implementation is assuming a 1:1 mapping which is only true for DOM0 and may not be at all in the future. Furthermore, all the helpers but arbitrary_virt_to_machine are used in x86 specific code (or only compiled for). The helper arbitrary_virt_to_machine is only used in PV specific code. Therefore we should never call the function. Add a BUG() in this helper and drop all the others. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/x86: Don't try to set PCE bit in CR4Boris Ostrovsky2015-08-201-2/+1
| | | | | | | | | Since VPMU code emulates RDPMC instruction with RDMSR and because hypervisor does not emulate it there is no reason to try setting CR4's PCE bit (and the hypervisor will warn on seeing it set). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/PMU: PMU emulation codeBoris Ostrovsky2015-08-201-29/+185
| | | | | | | | | | Add PMU emulation code that runs when we are processing a PMU interrupt. This code will allow us not to trap to hypervisor on each MSR/LVTPC access (of which there may be quite a few in the handler). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/PMU: Intercept PMU-related MSR and APIC accessesBoris Ostrovsky2015-08-205-8/+109
| | | | | | | | | | | | Provide interfaces for recognizing accesses to PMU-related MSRs and LVTPC APIC and process these accesses in Xen PMU code. (The interrupt handler performs XENPMU_flush right away in the beginning since no PMU emulation is available. It will be added with a later patch). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/PMU: Describe vendor-specific PMU registersBoris Ostrovsky2015-08-201-1/+152
| | | | | | | | | | | | AMD and Intel PMU register initialization and helpers that determine whether a register belongs to PMU. This and some of subsequent PMU emulation code is somewhat similar to Xen's PMU implementation. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/PMU: Initialization code for Xen PMUBoris Ostrovsky2015-08-2010-9/+398
| | | | | | | | | | | | | | | | | | | | | | Map shared data structure that will hold CPU registers, VPMU context, V/PCPU IDs of the CPU interrupted by PMU interrupt. Hypervisor fills this information in its handler and passes it to the guest for further processing. Set up PMU VIRQ. Now that perf infrastructure will assume that PMU is available on a PV guest we need to be careful and make sure that accesses via RDPMC instruction don't cause fatal traps by the hypervisor. Provide a nop RDPMC handler. For the same reason avoid issuing a warning on a write to APIC's LVTPC. Both of these will be made functional in later patches. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/PMU: Sysfs interface for setting Xen PMU modeBoris Ostrovsky2015-08-207-1/+228
| | | | | | | | Set Xen's PMU mode via /sys/hypervisor/pmu/pmu_mode. Add XENPMU hypercall. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: xensyms supportBoris Ostrovsky2015-08-206-0/+183
| | | | | | | | | Export Xen symbols to dom0 via /proc/xen/xensyms (similar to /proc/kallsyms). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: remove no longer needed p2m.hJuergen Gross2015-08-204-19/+9
| | | | | | | | | | | | | | | | | | Cleanup by removing arch/x86/xen/p2m.h as it isn't needed any more. Most definitions in this file are used in p2m.c only. Move those into p2m.c. set_phys_range_identity() is already declared in arch/x86/include/asm/xen/page.h, add __init annotation there. MAX_REMAP_RANGES isn't used at all, just delete it. The only define left is P2M_PER_PAGE which is moved to page.h as well. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: allow more than 512 GB of RAM for 64 bit pv-domainsJuergen Gross2015-08-205-27/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 64 bit pv-domains under Xen are limited to 512 GB of RAM today. The main reason has been the 3 level p2m tree, which was replaced by the virtual mapped linear p2m list. Parallel to the p2m list which is being used by the kernel itself there is a 3 level mfn tree for usage by the Xen tools and eventually for crash dump analysis. For this tree the linear p2m list can serve as a replacement, too. As the kernel can't know whether the tools are capable of dealing with the p2m list instead of the mfn tree, the limit of 512 GB can't be dropped in all cases. This patch replaces the hard limit by a kernel parameter which tells the kernel to obey the 512 GB limit or not. The default is selected by a configuration parameter which specifies whether the 512 GB limit should be active per default for domUs (domain save/restore/migration and crash dump analysis are affected). Memory above the domain limit is returned to the hypervisor instead of being identity mapped, which was wrong anyway. The kernel configuration parameter to specify the maximum size of a domain can be deleted, as it is not relevant any more. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: move p2m list if conflicting with e820 mapJuergen Gross2015-08-203-47/+264
| | | | | | | | | | | | | | | | | | | | | Check whether the hypervisor supplied p2m list is placed at a location which is conflicting with the target E820 map. If this is the case relocate it to a new area unused up to now and compliant to the E820 map. As the p2m list might by huge (up to several GB) and is required to be mapped virtually, set up a temporary mapping for the copied list. For pvh domains just delete the p2m related information from start info instead of reserving the p2m memory, as we don't need it at all. For 32 bit kernels adjust the memblock_reserve() parameters in order to cover the page tables only. This requires to memblock_reserve() the start_info page on it's own. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: add explicit memblock_reserve() calls for special pagesJuergen Gross2015-08-203-1/+19
| | | | | | | | | | | | | | | | | | | | Some special pages containing interfaces to xen are being reserved implicitly only today. The memblock_reserve() call to reserve them is meant to reserve the p2m list supplied by xen. It is just reserving not only the p2m list itself, but some more pages up to the start of the xen built page tables. To be able to move the p2m list to another pfn range, which is needed for support of huge RAM, this memblock_reserve() must be split up to cover all affected reserved pages explicitly. The affected pages are: - start_info page - xenstore ring (might be missing, mfn is 0 in this case) - console ring (not for initial domain) Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* mm: provide early_memremap_ro to establish read-only mappingJuergen Gross2015-08-203-0/+17
| | | | | | | | | | | | | | | During early boot as Xen pv domain the kernel needs to map some page tables supplied by the hypervisor read only. This is needed to be able to relocate some data structures conflicting with the physical memory map especially on systems with huge RAM (above 512GB). Provide the function early_memremap_ro() to provide this read only mapping. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: check for initrd conflicting with e820 mapJuergen Gross2015-08-201-0/+51
| | | | | | | | | | | Check whether the initrd is placed at a location which is conflicting with the target E820 map. If this is the case relocate it to a new area unused up to now and compliant to the E820 map. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: check pre-allocated page tables for conflict with memory mapJuergen Gross2015-08-203-3/+23
| | | | | | | | | | | Check whether the page tables built by the domain builder are at memory addresses which are in conflict with the target memory map. If this is the case just panic instead of running into problems later. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: check for kernel memory conflicting with memory layoutJuergen Gross2015-08-201-0/+12
| | | | | | | | | | | | Checks whether the pre-allocated memory of the loaded kernel is in conflict with the target memory map. If this is the case, just panic instead of run into problems later, as there is nothing we can do to repair this situation. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: find unused contiguous memory areaJuergen Gross2015-08-202-0/+35
| | | | | | | | | | | | | | | For being able to relocate pre-allocated data areas like initrd or p2m list it is mandatory to find a contiguous memory area which is not yet in use and doesn't conflict with the memory map we want to be in effect. In case such an area is found reserve it at once as this will be required to be done in any case. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: check memory area against e820 mapJuergen Gross2015-08-202-0/+24
| | | | | | | | | | | Provide a service routine to check a physical memory area against the E820 map. The routine will return false if the complete area is RAM according to the E820 map and true otherwise. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: split counting of extra memory pages from remappingJuergen Gross2015-08-201-40/+58
| | | | | | | | | | | | | | | | | | | | | Memory pages in the initial memory setup done by the Xen hypervisor conflicting with the target E820 map are remapped. In order to do this those pages are counted and remapped in xen_set_identity_and_remap(). Split the counting from the remapping operation to be able to setup the needed memory sizes in time but doing the remap operation at a later time. This enables us to simplify the interface to xen_set_identity_and_remap() as the number of remapped and released pages is no longer needed here. Finally move the remapping further down to prepare relocating conflicting memory contents before the memory might be clobbered by xen_set_identity_and_remap(). This requires to not destroy the Xen E820 map when the one for the system is being constructed. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: move static e820 map to global scopeJuergen Gross2015-08-201-47/+49
| | | | | | | | | | | Instead of using a function local static e820 map in xen_memory_setup() and calling various functions in the same source with the map as a parameter use a map directly accessible by all functions in the source. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: eliminate scalability issues from initial mapping setupJuergen Gross2015-08-203-39/+156
| | | | | | | | | | | | | | | | | | | | | | | | | Direct Xen to place the initial P->M table outside of the initial mapping, as otherwise the 1G (implementation) / 2G (theoretical) restriction on the size of the initial mapping limits the amount of memory a domain can be handed initially. As the initial P->M table is copied rather early during boot to domain private memory and it's initial virtual mapping is dropped, the easiest way to avoid virtual address conflicts with other addresses in the kernel is to use a user address area for the virtual address of the initial P->M table. This allows us to just throw away the page tables of the initial mapping after the copy without having to care about address invalidation. It should be noted that this patch won't enable a pv-domain to USE more than 512 GB of RAM. It just enables it to be started with a P->M table covering more memory. This is especially important for being able to boot a Dom0 on a system with more than 512 GB memory. Signed-off-by: Juergen Gross <jgross@suse.com> Based-on-patch-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: don't build mfn tree if tools don't need itJuergen Gross2015-08-201-3/+7
| | | | | | | | | | | In case the Xen tools indicate they don't need the p2m 3 level tree as they support the virtual mapped linear p2m list, just omit building the tree. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: save linear p2m list address in shared info structureJuergen Gross2015-08-201-0/+17
| | | | | | | | | | | | | | | The virtual address of the linear p2m list should be stored in the shared info structure read by the Xen tools to be able to support 64 bit pv-domains larger than 512 GB. Additionally the linear p2m list interface includes a generation count which is changed prior to and after each mapping change of the p2m list. Reading the generation count the Xen tools can detect changes of the mappings and re-read the p2m list eventually. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen: sync with xen headersJuergen Gross2015-08-202-24/+107
| | | | | | | | | | Use the newest headers from the xen tree to get some new structure layouts. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* arm/xen: Drop the definition of xen_pci_platform_unplugJulien Grall2015-08-201-3/+0
| | | | | | | | | | | | The commit 6f6c15ef912465b3aaafe709f39bd6026a8b3e72 "xen/pvhvm: Remove the xen_platform_pci int." makes the x86 version of xen_pci_platform_unplug static. Therefore we don't need anymore to define a dummy xen_pci_platform_unplug for ARM. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* xen/events: Support event channel rebind on ARMJulien Grall2015-08-206-10/+24
| | | | | | | | | | | | | | | | | | | | | | | Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen-blkfront: convert to blk-mq APIsBob Liu2015-08-201-86/+60
| | | | | | | | | | | | | | | | | | | | Note: This patch is based on original work of Arianna's internship for GNOME's Outreach Program for Women. Only one hardware queue is used now, so there is no significant performance change The legacy non-mq code is deleted completely which is the same as other drivers like virtio, mtip, and nvme. Also dropped one unnecessary holding of info->io_lock when calling blk_mq_stop_hw_queues(). Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@fb.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* xen/preempt: use need_resched() instead of should_resched()Konstantin Khlebnikov2015-08-201-1/+1
| | | | | | | | | | This code is used only when CONFIG_PREEMPT=n and only in non-atomic context: xen_in_preemptible_hcall is set only in privcmd_ioctl_hypercall(). Thus preempt_count is zero and should_resched() is equal to need_resched(). Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* x86/xen: fix non-ANSI declaration of xen_has_pv_devices()Colin Ian King2015-08-201-1/+1
| | | | | | | | | xen_has_pv_devices() has no parameters, so use the normal void parameter convention to make it match the prototype in the header file include/xen/platform_pci.h. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
* Linux 4.2-rc7v4.2-rc7Linus Torvalds2015-08-161-1/+1
|
* Merge tag 'armsoc-for-linus' of ↵Linus Torvalds2015-08-1613-56/+79
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A smallish batch of fixes, a little more than expected this late, but all fixes are contained to their platforms and seem reasonably low risk: - a somewhat large SMP fix for ux500 that still seemed warranted to include here - OMAP DT fixes for pbias regulator specification that broke due to some DT reshuffling - PCIe IRQ routing bugfix for i.MX - networking fixes for keystone - runtime PM for OMAP GPMC - a couple of error path bug fixes for exynos" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file ARM: dts: keystone: fix the clock node for mdio memory: omap-gpmc: Don't try to save uninitialized GPMC context ARM: imx6: correct i.MX6 PCIe interrupt routing ARM: ux500: add an SMP enablement type and move cpu nodes ARM: dts: dra7: Fix broken pbias device creation ARM: dts: OMAP5: Fix broken pbias device creation ARM: dts: OMAP4: Fix broken pbias device creation ARM: dts: omap243x: Fix broken pbias device creation ARM: EXYNOS: fix double of_node_put() on error path ARM: EXYNOS: Fix potentian kfree() of ro memory
| * Merge tag 'keystone-dts-late-fixes-v2' of ↵Olof Johansson2015-08-164-20/+33
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+ These are necessary to get the NIC card working on all Keystone EVMs. Couple of boards are broken without these two fixes. * tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file ARM: dts: keystone: fix the clock node for mdio Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific fileMurali Karicheri2015-08-134-20/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently mdio bindings are defined in keystone.dtsi and this results in incorrect unit address for the node on K2E and K2L SoCs. Fix this by moving them to SoC specific DTS file. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
| | * ARM: dts: keystone: fix the clock node for mdioMurali Karicheri2015-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Currently the MDIO clock is pointing to clkpa instead of clkcpgmac. MDIO is part of the ethss and the clock should be clkcpgmac. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
| * | Merge tag 'omap-for-v4.2/fixes-rc6' of ↵Olof Johansson2015-08-131-0/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fix a NULL pointer exception for omap GPMC bus code if probe fails. * tag 'omap-for-v4.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: memory: omap-gpmc: Don't try to save uninitialized GPMC context Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | memory: omap-gpmc: Don't try to save uninitialized GPMC contextTomeu Vizoso2015-08-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If for some reason the GPMC device hasn't been probed yet, gpmc_base is going to be NULL. Because there's no context yet to be saved, just turn these functions into no-ops until that device gets probed. Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = c0204000 [00000010] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc5-next-20150804-05947-g23f38fe8eda9 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) task: c0e623e8 ti: c0e5c000 task.ti: c0e5c000 PC is at omap3_gpmc_save_context+0x8/0xc4 LR is at omap_sram_idle+0x154/0x23c pc : [<c087c7ac>] lr : [<c023262c>] psr: 60000193 sp : c0e5df40 ip : c0f92a80 fp : c0999eb0 r10: c0e57364 r9 : c0e66f14 r8 : 00000003 r7 : 00000000 r6 : 00000003 r5 : 00000000 r4 : c0f5f174 r3 : c0fa4fe8 r2 : 00000000 r1 : 00000000 r0 : fa200280 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80204019 DAC: 00000015 Process swapper/0 (pid: 0, stack limit = 0xc0e5c220) Stack: (0xc0e5df40 to 0xc0e5e000) df40: 00000000 c0e66ef8 c0f5f1a4 00000000 00000003 c02333a4 c3813822 00000000 df60: 00000000 c0e5a5c8 cfb8a5d0 c07f0c44 0e4f1d7e 00000000 00000000 00000000 df80: c3813822 00000000 cfb8a5d0 c0e5e4e4 cfb8a5d0 c0e66f14 c0e5a5c8 c0e5e54c dfa0: c0e5e544 c0e57364 c0999eb0 c0277758 000000fa c0f5d000 00000000 c0d61c18 dfc0: ffffffff ffffffff 00000000 c0d61674 00000000 c0df7a48 00000000 c0f5d5d4 dfe0: c0e5e4c0 c0df7a44 c0e634f8 80204059 00000000 8020807c 00000000 00000000 [<c087c7ac>] (omap3_gpmc_save_context) from [<c023262c>] (omap_sram_idle+0x154/0x23c) [<c023262c>] (omap_sram_idle) from [<c02333a4>] (omap3_enter_idle_bm+0xec/0x1a8) [<c02333a4>] (omap3_enter_idle_bm) from [<c07f0c44>] (cpuidle_enter_state+0xbc/0x284) [<c07f0c44>] (cpuidle_enter_state) from [<c0277758>] (cpu_startup_entry+0x174/0x24c) [<c0277758>] (cpu_startup_entry) from [<c0d61c18>] (start_kernel+0x358/0x3c0) [<c0d61c18>] (start_kernel) from [<8020807c>] (0x8020807c) Code: c0ccace8 c0ccacc0 e59f30b4 e5932000 (e5921010) Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Suggested-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> [tony@atomide.com: updated description as suggested by Javier] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | Merge tag 'imx-fixes-4.2-3' of ↵Olof Johansson2015-08-131-4/+4
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 4.2, 3rd round: - Fix i.MX6 PCIe interrupt routing which gets missed from stacked IRQ domain conversion. The PCIe wakeup support is currently broken because of this. * tag 'imx-fixes-4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx6: correct i.MX6 PCIe interrupt routing Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: imx6: correct i.MX6 PCIe interrupt routingLucas Stach2015-08-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCIe interrupts are also routed through the GPC. This has been missed from the conversion to stacked IRQ domains as the PCIe controller uses an explicit interrupt map and thus doesn't inherit the SoC global interrupt parent. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Cc: <stable@vger.kernel.org> # 4.1 Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | | Merge tag 'samsung-mach-fixes-4.2' of https://github.com/krzk/linux into fixesOlof Johansson2015-08-131-2/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two fixes for bugs in Exynos power domain error exit path: 1. kfree() of read-only memory (name of power domain returned by kstrdup_const()), 2. Doubled of_node_put() leading to invalid ref count for OF node. * tag 'samsung-mach-fixes-4.2' of https://github.com/krzk/linux: ARM: EXYNOS: fix double of_node_put() on error path ARM: EXYNOS: Fix potentian kfree() of ro memory Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: EXYNOS: fix double of_node_put() on error pathVladimir Zapolskiy2015-07-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change removes the second of_node_put(), if for_each_compatible_node() body execution is not terminated. This prevents from object refcounter overflow over zero in OF_DYNAMIC build. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| | * | | | ARM: EXYNOS: Fix potentian kfree() of ro memoryVladimir Zapolskiy2015-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change fixes a bug introduced by 2be2a3ff42a5, memory allocated by kstrdup_const() must be always deallocated with kfree_const(), otherwise there is a risk of kfree'ing ro memory in power domain error exit path. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: <stable@vger.kernel.org> Fixes: 2be2a3ff42a5 ("ARM: EXYNOS: register power domain driver from core_initcall") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * | | | | Merge tag 'omap-for-v4.2/fixes-rc5' of ↵Olof Johansson2015-08-114-4/+7
| |\ \ \ \ \ | | | |_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Few trivial omap MMC regression fixes for card voltages where the syscon areas for PBIAS regulator were missing "simple-bus" that prevents probing of the children in the mapped region. This probably was not noticed earlier as the bootloader has already configured the regulator for the card in the slot. * tag 'omap-for-v4.2/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Fix broken pbias device creation ARM: dts: OMAP5: Fix broken pbias device creation ARM: dts: OMAP4: Fix broken pbias device creation ARM: dts: omap243x: Fix broken pbias device creation Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: dts: dra7: Fix broken pbias device creationKishon Vijay Abraham I2015-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit <d919501feffa> ("ARM: dts: dra7: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of scm_conf. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to scm_conf dt node. Fixes: d919501feffa ("ARM: dts: dra7: add minimal l4 bus layout with control module support") Cc: <stable@vger.kernel.org> # v4.1 Suggested-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: OMAP5: Fix broken pbias device creationKishon Vijay Abraham I2015-08-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit <ed8509edddeb> ("ARM: dts: omap5: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of omap5_padconf_global. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to omap5_padconf_global dt node. Fixes: ed8509edddeb ("ARM: dts: omap5: add minimal l4 bus layout with control module support") Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: OMAP4: Fix broken pbias device creationKishon Vijay Abraham I2015-08-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit <7415b0b4c645> ("ARM: dts: omap4: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of omap4_padconf_global. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to omap4_padconf_global dt node. Fixes: 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout with control module support") Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: omap243x: Fix broken pbias device creationKishon Vijay Abraham I2015-08-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit <72b10ac00eb1> ("ARM: dts: omap24xx: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of scm_conf. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to scm_conf dt node. Fixes: 72b10ac00eb1 ("ARM: dts: omap24xx: add minimal l4 bus layout with control module support") Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | ARM: ux500: add an SMP enablement type and move cpu nodesLinus Walleij2015-08-062-26/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "cpus" node cannot be inside the "soc" node, while this works for the CoreSight blocks, the early boot code will look for "cpus" directly under the root node, so this is a hard convention. So move the CPU nodes. Augment the "reg" property to match what is actually in the hardware: 0x300 and 0x301 respectively. Then add an SMP enablement type to be used by the SMP init code, "ste,dbx500-smp". Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | | | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-08-162-2/+2
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS bugfix from Ralf Baechle: "Only a single MIPS fix - the math when invoking syscall_trace_enter was wrong" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix seccomp syscall argument for MIPS64
| * | | | | | MIPS: Fix seccomp syscall argument for MIPS64Markos Chandras2015-08-162-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") fixed indirect system calls on O32 but it also introduced a bug for MIPS64 where it erroneously modified the v0 (syscall) register with the assumption that the sycall offset hasn't been taken into consideration. This breaks seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition with a move instruction. Fixes: 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") Cc: <stable@vger.kernel.org> # 3.15+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10951/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud