summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires2014-07-258-19/+16
| | | | | | | | wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - keep wacom_ids orderedBenjamin Tissoires2014-07-251-40/+39
| | | | | | | | | No Functional changes, just some reordering. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - remove field pktlen declaration in the list of devicesBenjamin Tissoires2014-07-252-269/+247
| | | | | | | | | | | | pktlen is now overwritten by the driver directly by reading the hid report descriptor. There is no need to declare it statically. We also move down the position of the field in the struct so that we can keep the current declaration of Wacom devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use hidinput_calc_abs_res instead of duplicating its codeBenjamin Tissoires2014-07-251-39/+9
| | | | | | | | | | This may infer a small difference with the previous implementation due to the DIV_ROUND_CLOSEST() in the hid implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use in-kernel HID parserBenjamin Tissoires2014-07-252-238/+114
| | | | | | | | | | | | | HID already parses the report descriptor, so use it instead of implementing our own. The special case for Bamboo PT 3rd gen is also removed and handled in the same way Intuos 5 is treated, by hardcoding it in the driver. Last, the unit_exponent stored into the hid field already is signed, so there is no need to handle a two's complement anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use hid_info instead of plain dev_infoBenjamin Tissoires2014-07-251-5/+3
| | | | | | | | | Removes one more need of usb and intf. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - register power device at the HID levelBenjamin Tissoires2014-07-251-2/+2
| | | | | | | | | | | Use the HID device as the parent for the power device when dealing with a wireless receiver. Removes one more usb dependency and does not break user space. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - remove usb dependency for siblings devicesBenjamin Tissoires2014-07-251-39/+37
| | | | | | | | | | | | | | | | | | | | | | | Wacom tablets can share different physical sensors on one physical device. These are called siblings in the code. The current way of implementation relies on the USB topology to be able to share data amongs those sensors. We can replace the code to match a HID subsystem, without involving the USB topology: - the first probed sensor does not find any siblings in the list wacom_udev_list, so it creates its own wacom_hdev_data with its own struct hid_device - the other sensor checks the current list of siblings in wacom_hdev_data, and if there is a match, it associates itself to the matched device. To be sure that we are not associating different sensors from different physical devices, we also check for the phys path of the hid device which contains the USB topology. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - register the input devices on top of the HID oneBenjamin Tissoires2014-07-252-8/+8
| | | | | | | | | | | | | | | Matches the current behavior of the HID subsystem and removes one more dependency over USB. The current user space clients which relies on this to fetch the LEDs path need an update. However, we already break them in the kernel v3.11 for the Bluetooth Wacom devices. They are going to be fixed soon. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - install LED/OLED sysfs files in the HID device instead of USBBenjamin Tissoires2014-07-251-11/+11
| | | | | | | | | | | | | | Removes one more dependency over USB, but requires some changes in the user space to find the sysfs files correctly. This patch breaks the user space. However, the number of program accessing the LEDs is quite limited and we can easily patch them to handle the new HID behavior. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - compute the HID report size to get the actual packet sizeBenjamin Tissoires2014-07-251-32/+26
| | | | | | | | | | | | | | | | | This removes an USB dependency and is more accurate: the computed pktlen is the actual maximum size of the reports forwarded by the device. Given that the pktlen is correctly computed/validated, we can store it now in the features struct instead of having a special handling in the rest of the code. Likewise, this information is not mandatory anymore in the description of devices in wacom_wac.c. They will be removed in a separate patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use HID core to actually fetch the report descriptorBenjamin Tissoires2014-07-251-60/+10
| | | | | | | | | | HID core already retrieves the report descritor. There is no need to ask ourself for one. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - use hid communication instead of plain usbBenjamin Tissoires2014-07-251-45/+36
| | | | | | | | | | | | | | | Wacom.ko was a plain USB driver for a HID device. The communications from/to the devices can actually be replaced with the HID API. At the USB level, the reports are exactly the same. This will allow to use uhid virtual devices instead of true USB devices. This step is necessary to implement regression tests. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - switch from an USB driver to a HID driverBenjamin Tissoires2014-07-257-188/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | All USB Wacom tablets are actually HID devices. For historical reasons, they are handled as plain USB devices. The current code makes more and more reference to the HID subsystem like implementing its own HID report descriptor parser to handle new devices. From the user point of view, we can transparently switch from this state to a driver handled in the HID subsystem and clean up a lot of USB specific code in the wacom.ko driver. The other benefit once the USB dependecies have been removed is that we can use a tool like uhid to make regression tests and allow further cleanup or new implementations without risking breaking current behaviors. To match the current handling of devices in wacom_wac.c, we rely on the hid_type set by usbhid. usbhid sets the hid_type to HID_TYPE_USBMOUSE when it sees a USB boot mouse protocol declared and HID_TYPE_USBNONE when the device is plain HID. There is thus a one to one matching between the list of supported devices before and after the switch from USB to HID. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - include and use linux/hid.hBenjamin Tissoires2014-07-251-31/+22
| | | | | | | | | | | | | | | | | | | The current wacom code redefines constants that are already in linux/hid.h This patch includes the official implementation and use it accross the code. There is a conflict with HID_USAGE and others at the same level: - in the wacom.ko implementation, those are the #define regarding the value of the field in the report descriptor - in the hid.h, those are bitmask So add HDESC_ in their current definition. Also, the struct hid_descriptor slightly differs from the linux/hid.h point of view, so mark it as custom for this driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - split out the pad device for the wireless receiverBenjamin Tissoires2014-07-251-23/+23
| | | | | | | | | | | | | | | The Wireless Receiver should also behave in the same way than regular USB devices. To simplify the unregistering of the different devices, wacom_unregister_inputs() is introduced. For consistency, the function wacom_register_input() is renamed into wacom_register_inputs(). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - split out the pad device for Graphire G4 and MOBenjamin Tissoires2014-07-251-17/+27
| | | | | | | | | | | MSC_SERIAL can be safely removed from pad devices. If it is not here, xf86-input-wacom correctly generates ones for its internal use. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - split out the pad device for DTUSBenjamin Tissoires2014-07-251-12/+6
| | | | | | | | | MSC_SERIAL can be safely removed from the pad device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - split out the pad device for BamboosBenjamin Tissoires2014-07-251-16/+23
| | | | | | | | | | We rely on the return code of wacom_bpt*() to do the input_sync(). wacom_wac_irq() then properly sync the input devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - split out the pad device for Intuos/CintiqBenjamin Tissoires2014-07-251-86/+122
| | | | | | | | | MSC_SERIAL can be safely dropped for pad input devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - create a separate input device for padsBenjamin Tissoires2014-07-254-9/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the pad events are sent through the stylus input device for the Intuos/Cintiqs, and through the touch input device for the Bamboos. To differentiate the buttons pressed on the pad from the ones pressed on the stylus, the Intuos/Cintiq uses MISC_SERIAL and ABS_MISC. This lead to a multiplexing of the events into one device, which are then splitted out in xf86-input-wacom. Bamboos are not using MISC events because the pad is attached to the touch interface, and only BTN_TOUCH is used for the finger (and DOUBLE_TAP, etc...). However, the user space driver still splits out the pad from the touch interface in the same way it does for the pro line devices. The other problem we can see with this fact is that some of the Intuos and Cintiq have a wheel, and the effective range of the reported values is [0..71]. Unfortunately, the airbrush stylus also sends wheel events (there is a small wheel on it), but in the range [0..1023]. From the user space point of view it is kind of difficult to understand that because the wheel on the pad are quite common, while the airbrush tool is not. A solution to fix all of these problems is to split out the pad device from the stylus/touch. This decision makes more sense because the pad is not linked to the absolute position of the finger or pen, and usually, the events from the pad are filtered out by the compositor, which then convert them into actions or keyboard shortcuts. For backward compatibility with current xf86-input-wacom, the pad devices still present the ABS_X, ABS_Y and ABS_MISC events, but they can be completely ignored in the new implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: wacom - assign phys field from struct wacom into input_devBenjamin Tissoires2014-07-251-0/+1
| | | | | | | This field was not used for 9 years, it is time to assign it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: Revert "wacom - testing result shows get_report is unnecessary."Benjamin Tissoires2014-07-251-0/+3
| | | | | | | | | | | | | This reverts commit 1b2faaf7e219fc2905d75afcd4c815e5d39eda80. The Intuos4 series presents a bug in which it hangs if it receives a set feature command while switching to the enhanced mode. This bug is triggered when plugging an Intuos 4 while having a gnome user session up and running. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Linux 3.16-rc6v3.16-rc6Linus Torvalds2014-07-201-1/+1
|
* Merge tag 'staging-3.16-rc6' of ↵Linus Torvalds2014-07-202-1/+10
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull more IIO driver fixes from Greg KH: "Here are two IIO driver fixes for 3.16-rc6 that resolve some reported issues" * tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mma8452: Use correct acceleration units. iio:core: Handle error when mask type is not separate
| * Merge tag 'iio-fixes-for-3.16d' of ↵Greg Kroah-Hartman2014-07-132-1/+10
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: 4th set of fixes for IIO in the 3.16 cycle * Fix incorrect handling of the iio_event_spec mask_shared_by_type bitmap. The point of this was to allow multiple channels to specify elements that lead to the same sysfs attribute. A but in the handling meant that this failed. The handling is modified to be similar to that used for the main IIO info_mask_shared_by_type which works correclty. * The acceleration scale factors reported by the mma8452 driver gave accelerations in g, wherease the IIO ABI is in m/s^2. The fix simply corrects the reported scale factors.
| | * iio: mma8452: Use correct acceleration units.Martin Fuzzey2014-07-121-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw value for the mma8452 (-2048) corresponds to -2G, -4G or -8G depending on the seleted mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org
| | * iio:core: Handle error when mask type is not separateSrinivas Pandruvada2014-07-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When event spec is shared by multiple channels, which has definition for mask_shared_by_type, iio_device_register_eventset fails. For example: static const struct iio_event_spec iio_dummy_events[] = { { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }, { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_ENABLE),a .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), } }; If two channels use this event spec, this will result in error. This change handles EBUSY error similar to iio_device_add_info_mask_type(). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
* | | Merge tag 'usb-3.16-rc6' of ↵Linus Torvalds2014-07-202-2/+21
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two USB patches that resolve some reported issues, one with an odd HUB, and one in the chipidea driver" * tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: Check if port status is equal to RxDetect usb: chipidea: udc: Disable auto ZLP generation on ep0
| * | | usb: Check if port status is equal to RxDetectGavin Guo2014-07-171-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller [1022:7814], the second hotplugging will experience the USB 3.0 pen drive is recognized as high-speed device. After bisecting the kernel, I found the commit number 41e7e056cdc662f704fa9262e5c6e213b4ab45dd (USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing some experiments, the bug can be fixed by avoiding executing the function hub_usb3_port_disable(). Because the port status with [AMD] FCH USB XHCI Controlleris [1022:7814] is already in RxDetect (I tried printing out the port status before setting to Disabled state), it's reasonable to check the port status before really executing hub_usb3_port_disable(). Fixes: 41e7e056cdc6 (USB: Allow USB 3.0 ports to be disabled.) Signed-off-by: Gavin Guo <gavin.guo@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: chipidea: udc: Disable auto ZLP generation on ep0Abbas Raza2014-07-171-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 2 methods for ZLP (zero-length packet) generation: 1) In software 2) Automatic generation by device controller 1) is implemented in UDC driver and it attaches ZLP to IN packet if descriptor->size < wLength 2) can be enabled/disabled by setting ZLT bit in the QH When gadget ffs is connected to ubuntu host, the host sends get descriptor request and wLength in setup packet is 255 while the size of descriptor which will be sent by gadget in IN packet is 64 byte. So the composite driver sets req->zero = 1. In UDC driver following code will be executed then if (hwreq->req.zero && hwreq->req.length && (hwreq->req.length % hwep->ep.maxpacket == 0)) add_td_to_list(hwep, hwreq, 0); Case-A: So in case of ubuntu host, UDC driver will attach a ZLP to the IN packet. ubuntu host will request 255 byte in IN request, gadget will send 64 byte with ZLP and host will come to know that there is no more data. But hold on, by default ZLT=0 for endpoint 0 so hardware also tries to automatically generate the ZLP which blocks enumeration for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING) Case-B: In case when gadget ffs is connected to Apple device, Apple device sends setup packet with wLength=64. So descriptor->size = 64 and wLength=64 therefore req->zero = 0 and UDC driver will not attach any ZLP to the IN packet. Apple device requests 64 bytes, gets 64 bytes and doesn't further request for IN data. But ZLT=0 by default for endpoint 0 so hardware tries to automatically generate the ZLP which blocks enumeration for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING) According to USB2.0 specs: 8.5.3.2 Variable-length Data Stage A control pipe may have a variable-length data phase in which the host requests more data than is contained in the specified data structure. When all of the data structure is returned to the host, the function should indicate that the Data stage is ended by returning a packet that is shorter than the MaxPacketSize for the pipe. If the data structure is an exact multiple of wMaxPacketSize for the pipe, the function will return a zero-length packet to indicate the end of the Data stage. In Case-A mentioned above: If we disable software ZLP generation & ZLT=0 for endpoint 0 OR if software ZLP generation is not disabled but we set ZLT=1 for endpoint 0 then enumeration doesn't block for 6 seconds. In Case-B mentioned above: If we disable software ZLP generation & ZLT=0 for endpoint then enumeration still blocks due to ZLP automatically generated by hardware and host not needing it. But if we keep software ZLP generation enabled but we set ZLT=1 for endpoint 0 then enumeration doesn't block for 6 seconds. So the proper solution for this issue seems to disable automatic ZLP generation by hardware (i.e by setting ZLT=1 for endpoint 0) and let software (UDC driver) handle the ZLP generation based on req->zero field. Cc: stable@vger.kernel.org Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'driver-core-3.16-rc6' of ↵Linus Torvalds2014-07-201-4/+14
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix that reverts an older patch that has been causing a number of reported problems with the platform devices. This revert has been in linux-next for a while with no reported issues" * tag 'driver-core-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: platform_get_irq: Revert to platform_get_resource if of_irq_get fails
| * | | platform_get_irq: Revert to platform_get_resource if of_irq_get failsGuenter Roeck2014-07-111-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commits 9ec36ca (of/irq: do irq resolution in platform_get_irq) and ad69674 (of/irq: do irq resolution in platform_get_irq_byname) change the semantics of platform_get_irq and platform_get_irq_byname to always rely on devicetree information if devicetree is enabled and if a devicetree node is attached to the device. The functions now return an error if the devicetree data does not include interrupt information, even if the information is available as platform resource data. This causes mfd client drivers to fail if the interrupt number is passed via platform resources. Therefore, if of_irq_get fails, try platform_get_resource as method of last resort. This restores the original functionality for drivers depending on platform resources to get irq information. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'char-misc-3.16-rc6' of ↵Linus Torvalds2014-07-201-1/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here's a single hyper-v driver fix for a reported issue" * tag 'char-misc-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: hv_fcopy: fix a race condition for SMP guest
| * | | | Drivers: hv: hv_fcopy: fix a race condition for SMP guestDexuan Cui2014-07-171-1/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should schedule the 5s "timer work" before starting the data transfer, otherwise, the data transfer code may finish so fast on another virtual cpu that when the code(fcopy_write()) trying to cancel the 5s "timer work" can occasionally fail because the "timer work" may haven't been scheduled yet and as a result the fcopy process will be aborted wrongly by fcopy_work_func() in 5s. Thank Liz Zhang <lizzha@microsoft.com> for the initial investigation on the bug. This addresses https://bugzilla.redhat.com/show_bug.cgi?id=1118123 Tested-by: Liz Zhang <lizzha@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-07-204-6/+17
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull intel drm fixes from Dave Airlie: "Intel fixes came in late, but since I debugged one of them I'll send them on, Two reverts, a quirk and one warn regression" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" drm/i915: Track the primary plane correctly when reassigning planes drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
| * \ \ \ Merge tag 'drm-intel-fixes-2014-07-18' of ↵Dave Airlie2014-07-194-6/+17
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel But in any case nothing really shocking in here, 2 reverts, 1 quirk and a regression fix a WARN. * tag 'drm-intel-fixes-2014-07-18' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" drm/i915: Track the primary plane correctly when reassigning planes drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
| | * | | | Revert "drm/i915: reverse dp link param selection, prefer fast over wide again"Dave Airlie2014-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 38aecea0ccbb909d635619cba22f1891e589b434. This breaks Haswell Thinkpad + Lenovo dock in SST mode with a HDMI monitor attached. Before this we can 1920x1200 mode, after this we only ever get 1024x768, and a lot of deferring. This didn't revert clean, but this should be fine. bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1117008 Cc: stable@vger.kernel.org # v3.15 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | | | drm/i915: Track the primary plane correctly when reassigning planesDaniel Vetter2014-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 98ec77397a5c68ce753dc283aaa6f4742328bcdd Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Apr 30 17:43:01 2014 +0300 drm/i915: Make primary_enabled match the actual hardware state introduced more accurate tracking of the primary plane and some checks. It missed the plane->pipe reassignement code for gen2/3 though, which the checks caught and resulted in WARNING backtraces. Since we only use this path if the plane is on and on the wrong pipe we can just always set the tracking bit to "enabled". Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | | | drm/i915: Ignore VBT backlight presence check on HP Chromebook 14Scot Doyle2014-07-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c675949ec58ca50d5a3ae3c757892f1560f6e896 drm/i915: do not setup backlight if not available according to VBT caused a regression on the HP Chromebook 14 (with Celeron 2955U CPU), which has a misconfigured VBT. Apply quirk to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Stefan Nagy <public@stefan-nagy.at> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | | | Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"Daniel Vetter2014-07-142-4/+11
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 773875bfb6737982903c42d1ee88cf60af80089c. It is very much needed and the lack of dithering has been reported by a large list of people with various gen2/3 hardware. Also, the original patch was complete non-sense since the WARNING backtraces in the references bugzilla are about gmch_pfit.lvds_border_bits mismatch, not at all about the dither bit. That one seems to work. Cc: Jiri Kosina <jkosina@suse.cz> Cc: Pavel Machek <pavel@ucw.cz> Cc: Hans de Bruin <jmdebruin@xmsnet.nl> Cc: stable@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds2014-07-203-9/+11
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UML fixes from Richard Weinberger: "Four fixes, all discovered by Trinity" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: segv: Save regs only in case of a kernel mode fault um: Fix hung task in fix_range_common() um: Ensure that a stub page cannot get unmapped Revert "um: Fix wait_stub_done() error handling"
| * | | | | um: segv: Save regs only in case of a kernel mode faultRichard Weinberger2014-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ...otherwise me lose user mode regs and the resulting stack trace is useless. Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | | | um: Fix hung task in fix_range_common()Richard Weinberger2014-07-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If do_ops() fails we have to release current->mm->mmap_sem otherwise the failing task will never terminate. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | | | um: Ensure that a stub page cannot get unmappedRichard Weinberger2014-07-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trinity discovered an execution path such that a task can unmap his stub page. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | | | | Revert "um: Fix wait_stub_done() error handling"Richard Weinberger2014-07-201-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0974a9cadc7886f7baaa458bb0c89f5c5f9d458e. The real for for that issue is to release current->mm->mmap_sem in fix_range_common(). Signed-off-by: Richard Weinberger <richard@nod.at>
* | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2014-07-202-4/+15
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have two more fixes in my for-linus branch. I was hoping to also include a fix for a btrfs deadlock with compression enabled, but we're still nailing that one down" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: test for valid bdev before kobj removal in btrfs_rm_device Btrfs: fix abnormal long waiting in fsync
| * | | | | | btrfs: test for valid bdev before kobj removal in btrfs_rm_deviceEric Sandeen2014-07-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 99994cd btrfs: dev delete should remove sysfs entry added a btrfs_kobj_rm_device, which dereferences device->bdev... right after we check whether device->bdev might be NULL. I don't honestly know if it's possible to have a NULL device->bdev here, but assuming that it is (given the test), we need to move the kobject removal to be under that test. (Coverity spotted this) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
| * | | | | | Btrfs: fix abnormal long waiting in fsyncLiu Bo2014-07-191-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xfstests generic/127 detected this problem. With commit 7fc34a62ca4434a79c68e23e70ed26111b7a4cf8, now fsync will only flush data within the passed range. This is the cause of the above problem, -- btrfs's fsync has a stage called 'sync log' which will wait for all the ordered extents it've recorded to finish. In xfstests/generic/127, with mixed operations such as truncate, fallocate, punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will mmap, and then msync. And I find that msync will wait for quite a long time (about 20s in my case), thanks to ftrace, it turns out that the previous fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants, there can be some ordered extents created but not getting corresponding pages flushed, then they're left in memory until we fsync which runs into the stage 'sync log', and fsync will just wait for the system writeback thread to flush those pages and get ordered extents finished, so the latency is inevitable. This adds a flush similar to btrfs_start_ordered_extent() in btrfs_wait_logged_extents() to fix that. Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
* | | | | | | Merge tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2014-07-206-62/+343
|\ \ \ \ \ \ \ | |_|/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NFS client fixes from Trond Myklebust: "Apologies for the relative lateness of this pull request, however the commits fix some issues with the NFS read/write code updates in 3.16-rc1 that can cause serious Oopsing when using small r/wsize. The delay was mainly due to extra testing to make sure that the fixes behave correctly. Highlights include; - Stable fix for an NFSv3 posix ACL regression - Multiple fixes for regressions to the NFS generic read/write code: - Fix page splitting bugs that come into play when a small rsize/wsize read/write needs to be sent again (due to error conditions or page redirty) - Fix nfs_wb_page_cancel, which is called by the "invalidatepage" method - Fix 2 compile warnings about unused variables - Fix a performance issue affecting unstable writes" * tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Don't reset pg_moreio in __nfs_pageio_add_request NFS: Remove 2 unused variables nfs: handle multiple reqs in nfs_wb_page_cancel nfs: handle multiple reqs in nfs_page_async_flush nfs: change find_request to find_head_request nfs: nfs_page should take a ref on the head req nfs: mark nfs_page reqs with flag for extra ref nfs: only show Posix ACLs in listxattr if actually present
OpenPOWER on IntegriCloud