summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] iscsi: use pageslabMike Christie2006-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | From: FUJITA Tomonori <tomof@acm.org> and zhenyu.z.wang@intel.com: We cannot handle filesystems like XFS becuase of the pages they are sending us. We had thought page_count could be used to work around this, but the correct test is for PageSlab. The proper solution is to figure out what type of pages filesystems can use so we do not have to add tests like this or handle it in the block layer for all network block drivers but the issue still has not been resolved on fs-devel so we are sending this patch as a temporary fix. This is last patch just in case it is Nakd with the explanation that we need to push the correct fix through fs-devel, mm or the block layer. The rest of the patchset can live without the patch, but the driver will not work with filesystems like XFS. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: fix 4k stack iscsi setupsMike Christie2006-01-142-14/+6
| | | | | | | | | | | | When we run the xmit code from queuecomand the stack trace gets too deep. The patch runs the xmit code from the scsi_host work queue. This fixes 4k stack and xfs support and should fix the st and sg stack usage bugs. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: seperate iscsi interface from setup functionsMike Christie2006-01-144-461/+583
| | | | | | | | | | | | | | | | | | | | | | | This is the second version of the patch to address Christoph's comments. Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c like the FC and SPI class. This was becuase the driver model and sysfs class is tied to the session and connection setup so separating did not buy very much at this time. The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot use the iscsi class becuase the scsi_host was tied to the interface and class code. This patch just seperates the session from scsi host so that LLDs that allocate the host per some resource like pci device can still use the class. This is also fixes a couple refcount bugs that can be triggered when users have a sysfs file open, close the session, then read or write to the file. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: add high mem supportMike Christie2006-01-142-55/+31
| | | | | | | | | | | | From Mike Christie <michaelc@cs.wisc.edu> and FUJITA Tomonori <tomof@acm.org>: We cannot use page_address becuase some pages could be highmem. Instead, we can use sock_no_sendpage which does kmap for us. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: data digest page cache usage fixFUJITA Tomonori2006-01-142-7/+11
| | | | | | | | | | | | | Users can write to a page while we are sending it and making digest calculations. This ends up causing us to retry the command when a digest error is later reported. By using sock_no_sendpage when data digests are calculated we can avoid a lot of (not all but it helps) the retries becuase sock_no_sendpage is not zero copy. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: host locking fixzhenyu.z.wang@intel.com2006-01-141-3/+4
| | | | | | | | | | We should be taking the host_lock instead of the conn lock when checking host_busy. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: data under/over flow fixzhenyu.z.wang@intel.com2006-01-141-4/+2
| | | | | | | | | We need to check the ISCSI_FLAG_DATA_* flags. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] iscsi: whitespace cleanupFUJITA Tomonori2006-01-141-11/+11
| | | | | | | | | Remove extra whitespaces. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] sem2mutex 3w-[x9]xxxJes Sorensen2006-01-144-8/+10
| | | | | | | | Convert a the 3w-9xxx.c and 3w-xxxx.c drivers to use mutexes instead of semaphores. Untested, but compiles and looks obviously correct. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] mptfc: need to select transport attrsJames Bottomley2006-01-141-0/+1
| | | | | | | Now that mptfc actually uses the transport class, it can't be built without it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fusion - fix pci express bugMoore, Eric2006-01-141-4/+4
| | | | | | | | | | | | The fix is to write 'MPI_HIM_DIM' to the Host Interrupt Mask register, when enabling interrupts. Instead of the tilde of MPI_HIM_RIM. Apparently writing '1's to some of the reserved bits was causing all the bits to go to `1`, which effectly disabled all interrupts. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_transport_sas: mapping the rphy channel equal to the port identifierMoore, Eric2006-01-141-3/+3
| | | | | | | | | | | We will be mapping the RAID volumes in mptsas to a reserved channel that is one larger than the anticapated number of ports on the direct attached host adapter. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fusion - mpi header udpateMoore, Eric2006-01-148-102/+554
| | | | | | | This updates mpi headers in fusion drivers to version 1.5.12. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fusion - adding raid support in mptsasMoore, Eric2006-01-142-1/+27
| | | | | | | The SAS RAID volumes are reported beyond the expected number of phys. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove target parent limitiationChristoph Hellwig2006-01-148-53/+57
| | | | | | | | | | | | | | | | | | | | | | | | | When James Smart fixed the issue of the userspace scan atributes crashing the system with the FC transport class he added a patch to let the transport class check if the parent is valid for a given transport class. When adding support for the integrated raid of fusion sas devices we ran into a problem with that, as it didn't allow adding virtual raid volumes without the transport class knowing about it. So this patch adds a user_scan attribute instead, that takes over from scsi_scan_host_selected if the transport class sets it and thus lets the transport class control the user-initiated scanning. As this plugs the hole about user-initiated scanning the target_parent hook goes away and we rely on callers of the scanning routines to do something sensible. For SAS this meant I had to switch from a spinlock to a mutex to synchronize the topology linked lists, in FC they were completely unsynchronized which seems wrong. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fusion - adding support for FC949ESMoore, Eric2006-01-143-0/+7
| | | | | | | Add software recognition for the new LSI Logic Fibre Channel controller. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] mptfusion - fc transport attributesMichael Reed2006-01-144-27/+613
| | | | | | Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] sem2mutex: scsi_transport_spi.cJes Sorensen2006-01-142-6/+6
| | | | | | | | | | Convert the SCSI transport class code to use a mutex rather than a semaphore. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fix up message/i2o/pci.cJames Bottomley2006-01-141-1/+1
| | | | | | There was a use before initialisation of c->name Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fusion: kzalloc / kcalloc conversionChristoph Hellwig2006-01-146-75/+35
| | | | | | | Convert kmalloc + memset to kzalloc or kcalloc in fusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fusion: convert semaphores to mutexesChristoph Hellwig2006-01-143-11/+11
| | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] mptsas: support basic hotplugChristoph Hellwig2006-01-142-31/+308
| | | | | | | | | | Adds hotplug support for SAS end devices. Unfortunately the fusion firmware doesn't generate similar events for expanders addition/removal so we can't support them yet. Eric has an idea about a clever scheme to find out about expander changes so that'll be added later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] I2O: move pci_request_regions() just behind pci_enable_device()Salyzyn, Mark2006-01-142-9/+11
| | | | | | | | | | | | | | | | | | | | | | The problem in dpt_i2o could be the pci config space accesses it triggers as it loads, dangerous to do if there is any I/O activity going on in the other driver (probable if a boot driver I guess). I approve this patch to dpt_i2o.c, and am applying it to the Adaptec branch of the driver. Thanks for the investigation Ryoji. --- In linux 2.6.15, data transfer does hang when both dpt_i2o and i2o_block drivers are loaded. It seems that location of pci_request_regions() are wrong. I moved it just behind pci_enable_device() like other drivers, and it becomes fine. Signed-off-by: Ryoji Kamei <kamei@miraclelinux.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] ips: Mode Sense (Caching Page ) fixJack Hammer2006-01-141-0/+3
| | | | | | | | | To avoid the "sda: got wrong page" message, the ServeRAID driver should be setting flags indicating that the Mode Sense commands are not supported. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] zfcp: transport class adaptations IIAndreas Herrmann2006-01-146-38/+29
| | | | | | | | | | Replaced zfcp adapter attributes with fc_host attributes: fc_topology by port_type, physical_wwpn by permanent_port_name. Make use of fc_host attribute supported_speeds. Removed zfcp adapter attribute physical_s_id. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] zfcp: transport class adaptationsAndreas Herrmann2006-01-146-64/+136
| | | | | | | | | | | Added host stats, removed superfluous get_starget_ functions, removed some attributes from zfcp specific sysfs tree (e.g. scsi_host_no, scsi_lun, wwnn and d_id). Host stats are given for the physical adapter port not for the virtual adapter. Reset stats is implemented in the device driver. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] zfcp: handle unsolicited status notification lostMaxim Shchetynin2006-01-142-0/+47
| | | | | | | | | Handle unsolicited adapter status that informs about loss of previous unsolicited status notification(s). Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fc transport: add permanent_port_name fc_host attributeAndreas Herrmann2006-01-142-0/+8
| | | | | | | | | | | | | Add fc_host attribute permanent_port_name which is used to show the port name of the primary port - the port that initially logged into the fabric. For a virtual port (registered via the primary port with FDISC command) it is useful to know not only its (virtual) port name but also the permanent port name. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] sr: split sr_audio_ioctl into specific helpersChristoph Hellwig2006-01-141-91/+111
| | | | | | | | | | split each ioctl handled in sr_audio_ioctl into a function of it's own. This cleans the code up nicely, and allows various places in sr_ioctl to call these helpers directly instead of going through the multiplexer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] always handle REQ_BLOCK_PC requests in common codeChristoph Hellwig2006-01-145-92/+13
| | | | | | | | | | | | | | LLDDs should never see REQ_BLOCK_PC requests, we can handle them just fine in the core code. There is a small behaviour change in that some check in sr's rw_intr are bypassed, but I consider the old behaviour a bug. Mike found this cleanup opportunity and provdided early patches, so all the credit goes to him, even if I redid the patches from scratch beause that was easier than forward-porting the old patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] sas: fix removal of devices behind expandersChristoph Hellwig2006-01-141-1/+11
| | | | | | | | | | | | We need to iterate over all children when removing and expander, else stale objects will be around after host removal. This fixes the oops Eric Moore saw when removing and reloading mptsas. Also don't try the scsi_remove_target call unless operating on an end device. The current unconditional call is harmless but confusing. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Pass proper device from BusLogic to SCSI layerPetr Vandrovec2006-01-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | While trying to get SUSE's SLES9 working on system with more than 4GB we've noticed that SCSI layer happilly passes addresses over 4GB to the buslogic driver, which is quite a big problem as buslogic can generate only 32bit busmastering cycles. Fortunately in the current kernels this problem does not exist anymore as SCSI layer now assumes 4GB capable device by default, but it is still good idea to pass correct device structure to the SCSI layer. If nothing else, /sys/block/sda/device now points to /sys/devices/pci0000:00/0000:00:10.0/host0/... instead of /sys/devices/platform/host0/... like it did in the past. Change does nothing for ISA based BusLogic adapters, they'll still end under platform (and they are probably broken for long time as I do not see anything forcing ISA 16MB limit for them). Signed-off-by: Petr Vandrovec <petr@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: bump version to 3.0James Bottomley2006-01-121-1/+1
| | | | | | | | This takes us past the old 1.x version of the SCSI driver and the 2.x version of the aic website version to reflect the full incorporation of both branches. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: Sequencer updateHannes Reinecke2006-01-129-1538/+1911
| | | | | | Update sequencer code to Adaptec version 2.0.12-6.3.9. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: Sanitize inb/outb handlingHannes Reinecke2006-01-121-59/+21
| | | | | | This patch coalesces inb/outb calls to the approriate word or long form. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: Use struct map_nodeHannes Reinecke2006-01-123-33/+58
| | | | | | Use struct map_node instead of separate variables. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic7xxx/aic79xx: New device idsHannes Reinecke2006-01-124-14/+40
| | | | Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Mask capabilities for SCSI-1 CD driveChuck Ebbert2006-01-121-2/+3
| | | | | | | | | SCSI-1 CD drives can't do MRW or be opened for writing, so mask off those capabilities. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: README updateMark Haverkamp2006-01-122-74/+108
| | | | | | | | | | | Received From Mark Salyzyn. Move the README from the driver directory to the Documentation directory. Updated the documentation, added descriptions for cards that were missing. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: 17 element sg performance updateMark Haverkamp2006-01-122-4/+18
| | | | | | | | | | | | Received From Mark Salyzyn. The Jaguar and Corsair class of adapters (2410, 2810, 2610, 21610, CERC) perform better (about 10% better read performance, write performance neutral) with current Firmware if the OS limits the number of scatter gather elements to 17 per request. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: better sysfs adapter informationMark Haverkamp2006-01-121-2/+18
| | | | | | | | | | | | Received from Mark Salyzyn. Provide more accurate adapter information. Allows the Adapter Firmware to override the Adapter product information. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: Fix default FIB sizeMark Haverkamp2006-01-121-0/+4
| | | | | | | | | | Received from Mark Salyzyn. If the adapter has not instructed us otherwise that it can handle a 'large' FIB, then it can handle at most a 2KB FIB. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] sas: clear parent->rphy in sas_rphy_deleteChristoph Hellwig2006-01-121-0/+2
| | | | | | | | We need to clear the backpointer on rphy removal, else we'll run into problems with host removal after a device has been hot unplugged. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] turn most scsi semaphores into mutexesArjan van de Ven2006-01-1217-120/+131
| | | | | | | | the scsi layer is using semaphores in a mutex way, this patch converts these into using mutexes instead Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic7xxx: fix timer handling bugJames Bottomley2006-01-123-41/+16
| | | | | | | | | The driver is doing a rather stupid mod_timer allegedly to "give request sense more time to complete". This is illegal and pointless, so just eliminate it. Also eliminate all the other uses of struct timer_list in the driver, which are mostly bogus. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla2xxx: Kconfig: two fixesAndrew Vasquez2006-01-123-10/+14
| | | | | | | | | Original From: Adrian Bunk Here's a composite patch with Adrian's original additions and help-text with the new Kconfig variable SCSI_QLA_FC. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc_scsi.c: make lpfc_get_scsi_buf() staticAdrian Bunk2006-01-121-1/+1
| | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_transport_spi.c: make print_nego() staticAdrian Bunk2006-01-121-1/+1
| | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] raid_class.c - adding RAID10 and RAID10 definesMoore, Eric2006-01-122-0/+4
| | | | | | | | | Adding defines for RAID10 and RAID50 levels, in preparation of adding RAID Transport support in the mpt fusion drivers. (BTW: IME is RAID10, and IM is RAID1). Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2006-01-11108-1299/+1608
|\
OpenPOWER on IntegriCloud