summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* net: forcedeth: Fix wake-on-lan regressionTobias Diedrich2009-02-161-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f55c21fd9a92a444e55ad1ca4e4732d56661bf2e ("forcedeth: call restore mac addr in nv_shutdown path"), which was introduced to fix the regression tracked at http://bugzilla.kernel.org/show_bug.cgi?id=11358 causes the wake-on-lan mac to be reversed in the shutdown path. Apparently the forcedeth situation is rather messy in that the mac we need to writeback for a subsequent modprobe to work is exactly the reverse of what is needed for proper wake-on-lan. The following patch explains the situation in the comments and makes the call to nv_restore_mac_addr() conditional (only called if we are not really going for poweroff). Tobias Diedrich wrote: > Hmm, I had not tried WOL for some time. > With 2.6.29-rc3 is see the following behaviour: > > State WOL Behaviour > ------------------------------ > shutdown reversed MAC > disk/shutdown reversed MAC > disk/platform OK > > Apparently nv_restore_mac_addr() restores the MAC in the wrong order > for WOL (at least for my PCI_DEVICE_ID_NVIDIA_NVENET_15). platform > works, because the MAC is not touched in the nv_suspend() path. > > A possible fix might be to only call nv_restore_mac_addr() if > system_state != SYSTEM_POWER_OFF. With the following patch: shutdown OK disk/shutdown OK disk/platform OK kexec OK Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de> Tested-by: Philipp Matthias Hahn <pmhahn@titan.lahn.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* wimax: fix oops in wimax_dev_get_by_genl_info() when looking up non-wimax ifaceInaky Perez-Gonzalez2009-02-121-4/+5
| | | | | | | | | | | | | When a non-wimax interface is looked up by the stack, a bad pointer is returned when the looked-up interface is not found in the list (of registered WiMAX interfaces). This causes an oops in the caller when trying to use the pointer. Fix by properly setting the pointer to NULL if we don't exit from the list_for_each() with a found entry. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 4 bytes kernel memory disclosure in SO_BSDCOMPAT gsopt try #2Clément Lecigne2009-02-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | In function sock_getsockopt() located in net/core/sock.c, optval v.val is not correctly initialized and directly returned in userland in case we have SO_BSDCOMPAT option set. This dummy code should trigger the bug: int main(void) { unsigned char buf[4] = { 0, 0, 0, 0 }; int len; int sock; sock = socket(33, 2, 2); getsockopt(sock, 1, SO_BSDCOMPAT, &buf, &len); printf("%x%x%x%x\n", buf[0], buf[1], buf[2], buf[3]); close(sock); } Here is a patch that fix this bug by initalizing v.val just after its declaration. Signed-off-by: Clément Lecigne <clement.lecigne@netasq.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix compile waring "label ‘set_32_bit_mask’ defined but not ↵Yang Hongyang2009-02-121-1/+1
| | | | | | | | | | | | | used" on IA64 platform When compile the latest kernel on IA64 platform,I got a warning: drivers/net/netxen/netxen_nic_main.c:203: warning: label ‘set_32_bit_mask’ defined but not used We do not need label ‘set_32_bit_mask’ on IA64 platform,So move it to #else. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Update version to 1.9.2 and copyright.Michael Chan2009-02-122-4/+4
| | | | | Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Fix jumbo frames error handling.Michael Chan2009-02-121-11/+19
| | | | | | | | | | | | If errors are reported on a frame descriptor, we need to account for the buffer pages that may have been used for this error packet and recycle them. Otherwise, we may get the wrong pages for the next packet. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Update 5709 firmware.Michael Chan2009-02-121-4432/+4363
| | | | | | | | | | New firmware fixes a data corruption issue when receiving and placing jumbo frames into host buffers. In some cases, the buffer descriptor is not updated correctly and this will lead to the driver linking the wrong number of pages into the SKB. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Update 5706/5708 firmware.Michael Chan2009-02-121-4309/+4206
| | | | | | | | | | New firmware fixes a data corruption issue when receiving and placing jumbo frames into host buffers. In some cases, the buffer descriptor is not updated correctly and this will lead to the driver linking the wrong number of pages into the SKB. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 3c505: do not set pcb->data.raw beyond its sizeRoel Kluin2009-02-121-10/+16
| | | | | | | | Ensure that we do not set pcb->data.raw beyond its size, print an error message and return false if we attempt to. A timout message was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Documentation/connector/cn_test.c: don't use gfp_any()Andrew Morton2009-02-121-4/+2
| | | | | | | | | | cn_test_timer_func() is a timer handler and can never use GFP_KERNEL - there's no point in using gfp_any() here. Also, use setup_timer(). Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: don't use in_atomic() in gfp_any()Andrew Morton2009-02-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | The problem is that in_atomic() will return false inside spinlocks if CONFIG_PREEMPT=n. This will lead to deadlockable GFP_KERNEL allocations from spinlocked regions. Secondly, if CONFIG_PREEMPT=y, this bug solves itself because networking will instead use GFP_ATOMIC from this callsite. Hence we won't get the might_sleep() debugging warnings which would have informed us of the buggy callsites. Solve both these problems by switching to in_interrupt(). Now, if someone runs a gfp_any() allocation from inside spinlock we will get the warning if CONFIG_PREEMPT=y. I reviewed all callsites and most of them were too complex for my little brain and none of them documented their interface requirements. I have no idea what this patch will do. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* IRDA: cnt is off by 1Roel Kluin2009-02-121-1/+1
| | | | | | | | | If no prior break occurs, cnt reaches 101 after the loop, so we are still able to change speed when cnt has become 100. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: remove pcie workaroundDhananjay Phadke2009-02-121-64/+0
| | | | | | | | | | | Remove workaround for pcie bug in early revisions of NX3031 (rev 41 or earlier). This is taken care of during firmware init. The workaround required writing pcie config reg of every pcie function on a card, not all of which are enabled. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sun3: print when lance_open() failsRoel Kluin2009-02-121-1/+1
| | | | | | | With while (--i > 0) { ... } i reaches 0; print when lance_open() fails Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Add missing rx buf clean index on early exit.Ron Mercer2009-02-121-0/+2
| | | | | | | | | | The large receive buffer queue is not properly tracking the current index in the case where an early exit occurs. This can happen when a page alloc or dma mapping fails. If this occurs the queue will get out of sync and invalid indexes can be written to the hardware. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Fix RX scaling values.Ron Mercer2009-02-121-2/+2
| | | | | | | | | Receive packets were only scaling across 2 of the receive queues. The value was hardcoded to 2 instead of being based on how many rx queues were running. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Fix TSO breakage.Ron Mercer2009-02-121-4/+6
| | | | | | | | Moved the buffer mapping to a point after TSO logic has modified the iph->check field. We were seeing stale data on the PCIe bus. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Add missing dev_kfree_skb_any() call.Ron Mercer2009-02-121-0/+2
| | | | | | | | We put the skb back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Add missing put_page() call.Ron Mercer2009-02-121-0/+2
| | | | | | | | We put the page back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Fix fatal error recovery hang.Ron Mercer2009-02-121-2/+11
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb().Ron Mercer2009-02-121-2/+2
| | | | | | | | | Replace calls to vlan_hwaccel_rx() and netif_rx(). Thanks to Dave Miller for pointing out the the driver was making the wrong upcall for passing packets into the stack. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* TG3: limit reaches -1Roel Kluin2009-02-121-2/+2
| | | | | | | | With while (limit--) { ... } limit reaches -1, so 0 means success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* iwlwifi: fix suspend/resume and its usage of pci saved stateReinette Chatre2009-02-112-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | Here we do two things: First, revert "iwlwifi: save PCI state before suspend, restore after resume". That misguided patch led to being unable to use iwlwifi devices after resume. Next, indicate to PCI driver that the saved PCI state is valid during suspend. We restore PCI state and enable the device when network interface is created, similarly PCI state is saved and the device is disabled when network interface is removed. Thus, when .suspend is called the PCI state is saved and device is disabled. This is the case even if an interface is never created as PCI state is saved and device disabled during .probe. PCI driver assumes PCI state is saved in .suspend. Saving the state at this time will save state of disabled device and thus cause problems during resume (resuming a disabled device). We thus indicate directly to PCI driver that current PCI saved state is valid. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Alex Riesen <fork0@users.sf.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* zd1211rw: treat MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for TP-Link WN322/422GHin-Tak Leung2009-02-111-0/+1
| | | | | | | | | | | | | | | Three people (Petr Mensik <pihhan@cipis.net> ["si" should be U+0161 U+00ED], Stephen Ho <stephenhoinhk@gmail.com> on zd1211-devs and Ismael Ojeda Perez <iojedaperez@gmail.com> on linux-wireless) reported success in getting TP-Link WN322G/WN422G working by treating MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for rf chip hardware initialization. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Petr Mensik <pihhan@cipis.net> Tested-by: Stephen Ho <stephenhoinhk@gmail.com> Tested-by: Ismael Ojeda Perez <iojedaperez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* zd1211rw: adding 0ace:0xa211 as a ZD1211 deviceHin-Tak Leung2009-02-111-0/+1
| | | | | | | | | | | Christoph Biedl <sourceforge.bnwi@manchmal.in-ulm.de> reported success in the sourceforge zd1211 mailing list on this addition. This product ID was supported by the vendor driver ZD1211LnxDrv 2.22.0.0 (and possibly earlier) and it probably should have been added earlier. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Christoph Biedl <sourceforge.bnwi@manchmal.in-ulm.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: restrict to AP in outgoing interface heuristicJohannes Berg2009-02-111-0/+2
| | | | | | | | | | | | We try to find the correct outgoing interface for injected frames based on the TA, but since this is a hack for hostapd 11w, restrict the heuristic to AP mode interfaces. At some point we'll add the ability to give an interface index in radiotap or so and just remove this heuristic again. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.28.x] Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rxBob Copeland2009-02-111-32/+53
| | | | | | | | | | | | | | | Under memory pressure, we may not be able to allocate a new skb for new packets. If the allocation fails, ath5k_tasklet_rx will exit but will leave a buffer in the list with a NULL skb, eventually triggering a BUG_ON. Extract the skb allocation from ath5k_rxbuf_setup() and change the tasklet to allocate the next skb before accepting a packet. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* sunhme: Fix Quattro HME irq registration on proble failuresMeelis Roos2009-02-101-6/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the sunhme driver installs SBus Quattro interrupt handler when at least one HME card was initialized correctly and at least one Quattro card is present. This breaks when a Quattro card fails initialization for whatever reason - IRQ is registered and OOPS happens when it fires. The solution, as suggested by David Miller, was to keep track which cards of the Quattro bundles have been initialized, and request/free the Quattro IRQ only when all four devices have been successfully initialized. The patch only touches SBus initialization - PCI init already resets the card pointer to NULL on init failure. The patch has been tested on Sun E3500 with SBus and PCI single HME cards and one PCI Quattro HME card in a situation where any PCI card failed init when the SBus routines tried to init them by mistake. Additionally it replaces Quattro request_irq panic with error return - if this card fails to work, at least let the others work. Tested on E450 with PCI HME and PCI Quad HME. [ Minor coding style fixups -DaveM ] Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
* fore200: fix oops on failed firmware loadMeelis Roos2009-02-101-2/+2
| | | | | | | | | Fore 200 ATM driver fails to handle request_firmware failures and oopses when no firmware file was found. Fix it by checking for the right return values and propaganting the return value up. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
* pkt_sched: type should be __u32 in headerChuck Ebbert2009-02-101-1/+1
| | | | | | | Using u32 in this header breaks the build of iptables. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Phonet: do not compute unused valueRémi Denis-Courmont2009-02-101-1/+1
| | | | | Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Phonet: fix double free in GPRS outbound packet error pathRémi Denis-Courmont2009-02-101-1/+0
| | | | | Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio-gpio: Add mdc pin direction initializationPaulius Zaleckas2009-02-101-0/+2
| | | | | | | | mdc pin should always be output. Initialize it as output, so each board code does not need to do this. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix LRO crash with tunHerbert Xu2009-02-091-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | > Kernel BUG at drivers/net/tun.c:444 > invalid opcode: 0000 [1] SMP > last sysfs file: /class/net/lo/ifindex > CPU 0 > Modules linked in: tun ipt_MASQUERADE iptable_nat ip_nat xt_state ip_conntrack > nfnetlink ipt_REJECT xt_tcpudp iptable_filter d > Pid: 6912, comm: qemu-kvm Tainted: G 2.6.18-128.el5 #1 > RIP: 0010:[<ffffffff886f57b0>] [<ffffffff886f57b0>] > :tun:tun_chr_readv+0x2b1/0x3a6 > RSP: 0018:ffff8102202c5e48 EFLAGS: 00010246 > RAX: 0000000000000000 RBX: ffff8102202c5e98 RCX: 0000000004010000 > RDX: ffff810227063680 RSI: ffff8102202c5e9e RDI: ffff8102202c5e92 > RBP: 0000000000010ff6 R08: 0000000000000000 R09: 0000000000000001 > R10: ffff8102202c5e94 R11: 0000000000000202 R12: ffff8102275357c0 > R13: ffff81022755e500 R14: 0000000000000000 R15: ffff8102202c5ef8 > FS: 00002ae4398db980(0000) GS:ffffffff803ac000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00002ae4ab514000 CR3: 0000000221344000 CR4: 00000000000026e0 > Process qemu-kvm (pid: 6912, threadinfo ffff8102202c4000, task > ffff81022e58d820) > Stack: 00000000498735cb ffff810229d1a3c0 0000000000000000 ffff81022e58d820 > ffffffff8008a461 ffff81022755e528 ffff81022755e528 ffffffff8009f925 > 000005ea05ea0000 ffff8102209d0000 00001051143e1600 ffffffff8003c00e > Call Trace: > [<ffffffff8008a461>] default_wake_function+0x0/0xe > [<ffffffff8009f925>] enqueue_hrtimer+0x55/0x70 > [<ffffffff8003c00e>] hrtimer_start+0xbc/0xce > [<ffffffff886f58bf>] :tun:tun_chr_read+0x1a/0x1f > [<ffffffff8000b3f3>] vfs_read+0xcb/0x171 > [<ffffffff800117d4>] sys_read+0x45/0x6e > [<ffffffff8005d116>] system_call+0x7e/0x83 > > > Code: 0f 0b 68 40 62 6f 88 c2 bc 01 f6 42 0a 08 74 0c 80 4c 24 41 > RIP [<ffffffff886f57b0>] :tun:tun_chr_readv+0x2b1/0x3a6 > RSP <ffff8102202c5e48> > <0>Kernel panic - not syncing: Fatal exception This crashed when an LRO packet generated by bnx2x reached a tun device through the bridge. We're supposed to drop it at the bridge. However, because the check was placed in br_forward instead of __br_forward, it's only effective if we are sending the packet through a single port. This patch fixes it by moving the check into __br_forward. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: fix to set device name when new IPv6 over IPv6 tunnel device is created.Noriaki TAKAMIYA2009-02-091-1/+1
| | | | | | | | | When the user creates IPv6 over IPv6 tunnel, the device name created by the kernel isn't set to t->parm.name, which is referred as the result of ioctl(). Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix boot hangs while bringing up gianfar ethernetJarek Poplawski2009-02-091-0/+6
| | | | | | | | | | | | | | | | | Ira Snyder found that commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844 "gianfar: Merge Tx and Rx interrupt for scheduling clean up ring" can cause hangs. It's because there was removed clearing of interrupts in gfar_schedule_cleanup() (which is called by an interrupt handler) in case when netif scheduling has been disabled. This patch brings back this action and a comment. Reported-by: Ira Snyder <iws@ovro.caltech.edu> Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Bisected-by: Ira Snyder <iws@ovro.caltech.edu> Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Tested-by: Ira Snyder <iws@ovro.caltech.edu> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: xt_sctp: sctp chunk mapping doesn't workQu Haoran2009-02-091-1/+1
| | | | | | | | | | | When user tries to map all chunks given in argument, kernel works on a copy of the chunkmap, but at the end it doesn't check the copy, but the orginal one. Signed-off-by: Qu Haoran <haoran.qu@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: ctnetlink: fix echo if not subscribed to any multicast groupPablo Neira Ayuso2009-02-091-2/+3
| | | | | | | | | | | This patch fixes echoing if the socket that has sent the request to create/update/delete an entry is not subscribed to any multicast group. With the current code, ctnetlink would not send the echo message via unicast as nfnetlink_send() would be skip. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: ctnetlink: allow changing NAT sequence adjustment in creationPablo Neira Ayuso2009-02-091-0/+10
| | | | | | | | | | | | | | This patch fixes an inconsistency in the current ctnetlink code since NAT sequence adjustment bit can only be updated but not set in the conntrack entry creation. This patch is used by conntrackd to successfully recover newly created entries that represent connections with helpers and NAT payload mangling. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: nf_conntrack_ipv6: don't track ICMPv6 negotiation messageEric Leblond2009-02-091-0/+21
| | | | | | | | | | | | This patch removes connection tracking handling for ICMPv6 messages related to Stateless Address Autoconfiguration, MLD, and MLDv2. They can not be tracked because they are massively using multicast (on pre-defined address). But they are not invalid and should not be detected as such. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: fix tuple inversion for Node information requestEric Leblond2009-02-091-2/+2
| | | | | | | | | | | The patch fixes a typo in the inverse mapping of Node Information request. Following draft-ietf-ipngwg-icmp-name-lookups-09, "Querier" sends a type 139 (ICMPV6_NI_QUERY) packet to "Responder" which answer with a type 140 (ICMPV6_NI_REPLY) packet. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix msi-x interrupt handlingDhananjay Phadke2009-02-082-2/+13
| | | | | | | | | o Cut down msi-x vectors from 8 to 1 since only one is used for now. o Use separate handler for msi-x, that doesn't unnecessarily scrub msi status register. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* de2104x: force correct order when writing to rx ringRisto Suominen2009-02-081-1/+2
| | | | | | | | DescOwn should not be set, thus allowing the chip to use the descriptor, before everything else is set up correctly. Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tun: Fix unicast filter overflowAlex Williamson2009-02-081-2/+8
| | | | | | | | | | | | | | | | Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/isdn: introduce missing kfreeJulia Lawall2009-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/atm: introduce missing kfreeJulia Lawall2009-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* sunhme: Don't match PCI devices in SBUS probe.David S. Miller2009-02-071-4/+8
| | | | | | | | | | | | | Unfortunately, the OF device tree nodes for SBUS and PCI hme devices have the same device node name on some systems. So if the name of the parent node isn't 'sbus', skip it. Based upon an excellent report and detective work by Meelis Roos and Eric Brower. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Meelis Roos <mroos@linux.ee>
* 9p: fix endian issues [attempt 3]Eric Van Hensbergen2009-02-061-9/+13
| | | | | | | | | | | | When the changes were done to the protocol last release, some endian bugs crept in. This patch fixes those endian problems and has been verified to run on 32/64 bit and x86/ppc architectures. This version of the patch incorporates the correct annotations for endian variables. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_dma: call dmaengine_get only if NET_DMA enabledDavid S. Miller2009-02-062-2/+14
| | | | | | | | | | | | | | Based upon a patch from Atsushi Nemoto <anemo@mba.ocn.ne.jp> -------------------- The commit 649274d993212e7c23c0cb734572c2311c200872 ("net_dma: acquire/release dma channels on ifup/ifdown") added unconditional call of dmaengine_get() to net_dma. The API should be called only if NET_DMA was enabled. -------------------- Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Dan Williams <dan.j.williams@intel.com>
* 3c509: Fix resume from hibernation for PnP mode.Ondrej Zary2009-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | From: Ondrej Zary <linux@rainbow-software.org> last year, I posted a patch which fixed hibernation on 3c509 cards. That was back in 2.6.24. It worked fine in 2.6.25. But then I stopped using hibernation (as it did not work with my new IT8212 RAID controller). Now I fixed it and noticed that 3c509 does not wake up properly anymore (in 2.6.28) - neither in PnP nor in ISA modes. ifconfig down/up makes the card work again in PnP mode. However, in ISA mode, ifconfig up ends with "No such device" error. Comparing the 3c509 driver between 2.6.25 and 2.6.28, there's only some statistics-related change. So the cause of the problem must be somewhere else. This patch makes the resume work in PnP mode, but it's still not enough for ISA mode. Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud