summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] qla2xxx: fix potential deadlock on ha->hardware_lockJiri Kosina2012-10-091-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lockdep reports: === [ cut here ] === ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.6.0-0.0.0.28.36b5ec9-default #1 Not tainted --------------------------------------------------------- qla2xxx_1_dpc/368 just changed the state of lock: (&(&ha->vport_slock)->rlock){+.....}, at: [<ffffffffa009b377>] qla2x00_configure_hba+0x197/0x3c0 [qla2xxx] but this lock was taken by another, HARDIRQ-safe lock in the past: (&(&ha->hardware_lock)->rlock){-.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&ha->vport_slock)->rlock); local_irq_disable(); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->vport_slock)->rlock); <Interrupt> lock(&(&ha->hardware_lock)->rlock); === [ cut here ] === Fix the potential deadlock by disabling IRQs while holding ha->vport_slock. Reported-and-tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] scsi_debug: Fix off-by-one bug when unmapping regionLukas Czerner2012-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Currently it is possible to unmap one more block than user requested to due to the off-by-one error in unmap_region(). This is probably due to the fact that the end variable despite its name actually points to the last block to unmap + 1. However in the condition it is handled as the last block of the region to unmap. The bug was not previously spotted probably due to the fact that the region was not zeroed, which has changed with commit be1dd78de5686c062bb3103f9e86d444a10ed783. With that commit we were able to corrupt the ext4 file system on 256M scsi_debug device with LBPRZ enabled using fstrim. Since the 'end' semantic is the same in several functions there this commit just fixes the condition to use the 'end' variable correctly in that context. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Shorten the path length of scsi_cmd_to_driver()Li Zhong2012-10-092-13/+7
| | | | | | | | | | | | | This patch tries to shorten the path length of scsi_cmd_to_driver(). As only REQ_TYPE_BLOCK_PC commands can be submitted without a driver, so we could avoid the related NULL checking, as long as we make sure we don't use it for REQ_TYPE_BLOCK_PC type commands. Plus, this fixes a bug where you get different behaviors from REQ_TYPE_BLOCK_PC commands when a driver is and isn't attached. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] virtio-scsi: support online resizing of disksPaolo Bonzini2012-10-092-1/+32
| | | | | | | | | | | | Support the LUN parameter change event. Currently, the host fires this event when the capacity of a disk is changed from the virtual machine monitor. The resize then appears in the kernel log like this: sd 0:0:0:0: [sda] 46137344 512-byte logical blocks: (23.6 GB/22.0 GIb) sda: detected capacity change from 22548578304 to 23622320128 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] virtio-scsi: fix LUNs greater than 255Paolo Bonzini2012-10-091-1/+5
| | | | | | | | | | | virtio-scsi needs to report LUNs greater than 256 using the "flat" format. Because the Linux SCSI layer just maps the SCSI LUN to an u32, without any parsing, these end up in the range from 16640 to 32767. Fix max_lun to account for the possibility that logical unit numbers are encoded with the "flat" format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] virtio-scsi: initialize scatterlist structureRichard W.M. Jones2012-10-091-1/+1
| | | | | | | | | | The sg struct is used without being initialized, which breaks when CONFIG_DEBUG_SG is enabled. Cc: stable@vger.kernel.org Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Version, Changelog, Copyright updateadam radford2012-10-096-9/+22
| | | | | Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Remove duplicate codeadam radford2012-10-092-3/+0
| | | | | Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Add SystemPD FastPath supportadam radford2012-10-091-0/+2
| | | | | Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Add array boundary check for SystemPDadam radford2012-10-091-1/+2
| | | | | Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Load io_request DataLength in bytesadam radford2012-10-091-9/+7
| | | | | | | | Load io_request->DataLength in bytes for newer firmware that supports high availability. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Add module param for configurable MSI-X vector countadam radford2012-10-091-0/+8
| | | | | Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] megaraid_sas: Remove un-needed completion_lock spinlock callsadam radford2012-10-091-2/+0
| | | | | Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver releaseJames Smart2012-10-081-1/+1
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer ↵James Smart2012-10-085-16/+151
| | | | | | | when QoS not on Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing ↵James Smart2012-10-081-0/+2
| | | | | | | performance issues Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed SCSI host create showing wrong link speed on SLI3 ↵James Smart2012-10-081-2/+8
| | | | | | | HBA ports Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when ↵James Smart2012-10-082-4/+15
| | | | | | | verifying FCF record for use Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed messages for misconfigured port errorsJames Smart2012-10-081-3/+7
| | | | | | | | Fixed messages for misconfigured port errors to be consistent for all OS platforms. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed kernel warning on spinlock usage on some distributionsJames Smart2012-10-081-10/+11
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed PRLI not being retried if a LS_RJT with a reasonJames Smart2012-10-081-2/+3
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Correct request_firmware use that was increasing boot timesJames Smart2012-10-081-26/+31
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fix FCP2 Retries for non-r/w commands.James Smart2012-10-081-0/+2
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fixed Linux generic firmware download on SLI4 devices ↵James Smart2012-10-082-2/+5
| | | | | | | with longer module names Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Expand I/O channel support for large systemsJames Smart2012-10-082-22/+22
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Correct missing queue destroy on function resetJames Smart2012-10-081-2/+2
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fix incorrect comment in T10 DIF attributesJames Smart2012-10-081-1/+7
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Added checking BMBX register for RDY bit before writing ↵James Smart2012-10-081-28/+47
| | | | | | | the first address in Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.35: Fix interrupt delay multipler conversion for eq_createJames Smart2012-10-082-5/+12
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Documentation: Add lesb/ to path for LESB attributes in FCoE bus ↵Robert Love2012-10-071-6/+6
| | | | | | | | | | | | documentation The Link Error Status Block attributes are incorrectly named as they do not have the lesb_ prefix, but instead are grouped in the lesb/ attribute group. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] libfc: fix lun reset failure bugs in fc_fcp_resp handling of FCP_RSP_INFOYi Zou2012-10-072-1/+8
| | | | | | | | | | | | | | | | | | | | | | In LUN RESET testing involving NetApp targets, it is observed that LUN RESET is failing. The fc_fcp_resp() is not completing the completion for the LUN RESET task since fc_fcp_resp assumes that the FCP_RSP_INFO is 8 bytes with the 4 byte reserved field, where in case of NetApp targets the FCP_RSP to LUN RESET only has 4 bytes of FCP_RSP_INFO. This leads fc_fcp_resp to error out w/o completing the task completion, eventually causing LUN RESET to be escalated to host reset, which is not very nice. Per FCP-3 r04, clause 9.5.15 and Table 23, the FCP_RSP_INFO field can be either 4 bytes or 8 bytes, with the last 4 bytes as "Reserved (if any)". Therefore it is valid to have 4 bytes FCP_RSP_INFO like some of the NetApp targets behave. Fixing this by validating the FCP_RSP_INFO against both the two spec allowed length. Reported-by: Frank Zhang <frank_1.zhang@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] fcoe: Fix write errors on NPIV portsNeerav Parikh2012-10-073-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCSI errors were generated while writing to LUNs connected via NPIV ports. Debugging this it was found that the FCoE packets transmitted via the NPIV ports were not tagged with correct user priority as negotiated with peer by DCB agent. This resulted in FCoE traffic going with priority zero(0) that did not have priority flow control (PFC) enabled for it. The initiator after transferring data to the target never saw any reply indicating the transfer was complete. This resulted in error recovery (ABTS) and SCSI command retries by the scsi-mid layer; eventually resulting in I/O errors. This patch fixes this issue by keeping the FCoE user priority information in the fcoe_interface instance that is common for both the physical port as well as NPIV ports connected to that physical port; instead of storing it in fcoe_port structure that has a per port instance. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Acked-by: Yi Zou <yi.zou@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] mvumi: Add support for Marvell SAS/SATA RAID-on-Chip(ROC) 88RC9580Shun Fu2012-10-072-260/+1068
| | | | | | [jejb: fix up for spelling correction patch] Signed-off-by: Shun Fu <fushun@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Update the driver version to 3.1.2.1Krishna Gudipati2012-10-071-1/+1
| | | | | Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Firmware image naming convention updateKrishna Gudipati2012-10-071-3/+3
| | | | | | | | | | | | - Modified the firmware naming convention to contain the firmware image version (3.1.0.0). - The new convention is <firmware-image>-<firmware-version>.bin - The change will enforce loading only compatible firmware with this driver and also avoid over-writing the old firmware image in-order to load new version driver as the firmware names used to be the same. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add support to read/update the FRU data.Krishna Gudipati2012-10-079-5/+715
| | | | | | | | | - Add FRU sub-module to support FRU read/write/update. - Add support to read/write from the temp FRU module. [jejb: fix checkpatch issues] Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Support Power on Hours display and diag temp sensor fixesKrishna Gudipati2012-10-073-5/+42
| | | | | | | | - Add Power On Hours display support during sfpshow - Fix to properly set the diag temperature sensor status variable. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add support to configure min/max bandwidth for a pcifnKrishna Gudipati2012-10-077-26/+41
| | | | | | | | | | - Added support to configure minimum bandwidth for a pcifn. - Minimum bandwith is guaranteed at per queue level. - Added support to update pcifn bandwidth dynamically without a server reboot. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add support for IO throttling at port levelKrishna Gudipati2012-10-078-8/+182
| | | | | | | | | Add capability to limit the number of exchanges on a port to avoid queue-full conditions from the target side. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add support for user to configure bandwidth on QoS prioritiesKrishna Gudipati2012-10-076-6/+94
| | | | | | | | | Made changes to provide an option for user to configure the bandwidth percentage for High/Medium/Low QoS priorities. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Fabric Assigned Address implementation fixKrishna Gudipati2012-10-072-3/+88
| | | | | | | | | | | | | | - Made changes such that once the PWWN is acquired from the fabric through FAA, and if the FAPWWN configuration is modified on the switch side, driver should show relevant information to the user. - Added logic to cache the reason code when the given port is disabled implicitl due to FAA error condition. - If the port is disabled, while sending SCN to upper layer, update the reason code appropriately. With this, BFA FC port state machine will enter into faa_err_config state. This state will be shown to the user. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add diagnostic port (D-Port) supportKrishna Gudipati2012-10-079-3/+658
| | | | | | | | | | | | | | - Introduced support for D-Port which is a new port mode during which link level diagnostics can be run. - Provided mechanism to dynamically configure D-Port and initiate diagnostic tests to isolate any link level issues. - In D-Port mode, the HBA port does not participate in fabric or login to the remote device or run data traffic. - Diagnostic tests include running various loopback tests in conjunction with the attached device. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Fix to handle firmware tskim abort request responseKrishna Gudipati2012-10-073-8/+15
| | | | | | | | | | - Enhance tracing to include both tskim tag and event. - Handle the tskim abort response from firmware in the tskim state machine cleanup state and proceed with the tskim cleanup. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Fix few attributes in the RHBA CT passthru commandKrishna Gudipati2012-10-073-10/+11
| | | | | | | | | | | - Made changes to set the RHBA command max payload based on the port configured frame size. - Made changes to fix the driver/fw version size in FMDI structure. - Fix to pass the fw version for FDMI attribute type FDMI_HBA_ATTRIB_FW_VERSION rather than driver version. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add support to have mfg date as part of adapter attributesKrishna Gudipati2012-10-073-0/+11
| | | | | | | | | Made changes to expose mfg day/month/year as part of the adapter attributes for user space applications. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Flash Controller PLL initialization fixesKrishna Gudipati2012-10-072-83/+131
| | | | | | | | | | - Made changes to check the flash controller status before IOC initialization. - Made changes to poll on the FLASH_STS_REG bit to check if the flash controller initialization is completed during the PLL init. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: IOCFC state machine enhancementsKrishna Gudipati2012-10-073-26/+63
| | | | | | | | | | - Add support to handle STOP/DISABLE events in the IOCFC state machine. - Made changes to bring the IOC down on a flash driver config read failure. - Added logic to clean the use count and fail sync registers during IOCFC init. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bfa: Add support for FC Arbitrated Loop topology.Krishna Gudipati2012-10-0712-119/+713
| | | | | | | | | | | | | | | | - Add private loop topology support at 2G/4G/8G speeds with following limitations 1. No support for multiple initiators in the loop 2. No public loop support. If attached to a loop with an FL_Port, device continues to work as a private NL_Port in the loop 3. No auto topology detection. User has to manually set the configured topology to loop if attaching to loop. - When loop topology is configured, enabling FC port features QoS/Trunk/TRL are not allowed and vice versa. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge tag 'stable/for-linus-3.7-x86-tag' of ↵Linus Torvalds2012-10-0240-249/+916
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "Features: - When hotplugging PCI devices in a PV guest we can allocate Xen-SWIOTLB later. - Cleanup Xen SWIOTLB. - Support pages out grants from HVM domains in the backends. - Support wild cards in xen-pciback.hide=(BDF) arguments. - Update grant status updates with upstream hypervisor. - Boot PV guests with more than 128GB. - Cleanup Xen MMU code/add comments. - Obtain XENVERS using a preferred method. - Lay out generic changes to support Xen ARM. - Allow privcmd ioctl for HVM (used to do only PV). - Do v2 of mmap_batch for privcmd ioctls. - If hypervisor saves the LED keyboard light - we will now instruct the kernel about its state. Fixes: - More fixes to Xen PCI backend for various calls/FLR/etc. - With more than 4GB in a 64-bit PV guest disable native SWIOTLB. - Fix up smatch warnings. - Fix up various return values in privmcmd and mm." * tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (48 commits) xen/pciback: Restore the PCI config space after an FLR. xen-pciback: properly clean up after calling pcistub_device_find() xen/vga: add the xen EFI video mode support xen/x86: retrieve keyboard shift status flags from hypervisor. xen/gndev: Xen backend support for paged out grant targets V4. xen-pciback: support wild cards in slot specifications xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer. xen/swiotlb: Remove functions not needed anymore. xen/pcifront: Use Xen-SWIOTLB when initting if required. xen/swiotlb: For early initialization, return zero on success. xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used. xen/swiotlb: Move the error strings to its own function. xen/swiotlb: Move the nr_tbl determination in its own function. xen/arm: compile and run xenbus xen: resynchronise grant table status codes with upstream xen/privcmd: return -EFAULT on error xen/privcmd: Fix mmap batch ioctl error status copy back. xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl xen/mm: return more precise error from xen_remap_domain_range() xen/mmu: If the revector fails, don't attempt to revector anything else. ...
| * xen/pciback: Restore the PCI config space after an FLR.Konrad Rzeszutek Wilk2012-09-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we do an FLR, or D0->D3_hot we may lose the BARs as the device has turned itself off (and on). This means the device cannot function unless the pci_restore_state is called - which it is when the PCI device is unbound from the Xen PCI backend driver. For PV guests it ends up calling pci_enable_device / pci_enable_msi[x] which does the proper steps That however is not happening if a HVM guest is run as QEMU deals with PCI configuration space. QEMU also requires that the device be "parked" under the ownership of a pci-stub driver to guarantee that the PCI device is not being used. Hence we follow the same incantation as pci_reset_function does - by doing an FLR, then restoring the PCI configuration space. The result of this patch is that when you run lspci, you get now this: - Region 0: [virtual] Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K] - Region 1: [virtual] Memory at fe800000 (32-bit, non-prefetchable) [size=512K] + Region 0: Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K] + Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at c000 [size=32] - Region 3: [virtual] Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K] + Region 3: Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K] The [virtual] means that lspci read those entries from SysFS but when it read them from the device it got a different value (0xfffffff). CC: stable@vger.kernel.org #only for 3.5, 3.6 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
OpenPOWER on IntegriCloud