summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: fix race condition caused by late addBA responseNikolay Martynov2011-11-281-1/+17
| | | | | | | | | | | | | | | | | If addBA responses comes in just after addba_resp_timer has expired mac80211 will still accept it and try to open the aggregation session. This causes drivers to be confused and in some cases even crash. This patch fixes the race condition and makes sure that if addba_resp_timer has expired addBA response is not longer accepted and we do not try to open half-closed session. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> [some adjustments] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Revert change that broke AR928X on Acer Ferrari OneRafael J. Wysocki2011-11-281-1/+2
| | | | | | | | | | | | Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f2320f1d2f09be122efef5b9118efee4 (ath9k_hw: Add support for AR946/8x chipsets) that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: fix lps_lock deadlockStanislaw Gruszka2011-11-281-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rtl_lps_leave can be called from interrupt context, so we have to disable interrupts when taking lps_lock. Below is full lockdep info about deadlock: [ 93.815269] ================================= [ 93.815390] [ INFO: inconsistent lock state ] [ 93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815556] --------------------------------- [ 93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 93.815832] (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.815947] {SOFTIRQ-ON-W} state was registered at: [ 93.815947] [<ffffffff8108e10d>] __lock_acquire+0x369/0xd0c [ 93.815947] [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e [ 93.815947] [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79 [ 93.815947] [<ffffffffa025de34>] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi] [ 93.815947] [<ffffffffa025aec0>] rtl_op_config+0x12a/0x32a [rtlwifi] [ 93.815947] [<ffffffffa01d614b>] ieee80211_hw_config+0x124/0x129 [mac80211] [ 93.815947] [<ffffffffa01e0af3>] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211] [ 93.815947] [<ffffffff81075aa5>] process_one_work+0x205/0x3e7 [ 93.815947] [<ffffffff81076753>] worker_thread+0xda/0x15d [ 93.815947] [<ffffffff8107a119>] kthread+0xa8/0xb0 [ 93.815947] [<ffffffff814f3184>] kernel_thread_helper+0x4/0x10 [ 93.815947] irq event stamp: 547822 [ 93.815947] hardirqs last enabled at (547822): [<ffffffff814ea1a7>] _raw_spin_unlock_irqrestore+0x45/0x61 [ 93.815947] hardirqs last disabled at (547821): [<ffffffff814e9987>] _raw_spin_lock_irqsave+0x22/0x8e [ 93.815947] softirqs last enabled at (547790): [<ffffffff810623ed>] _local_bh_enable+0x13/0x15 [ 93.815947] softirqs last disabled at (547791): [<ffffffff814f327c>] call_softirq+0x1c/0x30 [ 93.815947] [ 93.815947] other info that might help us debug this: [ 93.815947] Possible unsafe locking scenario: [ 93.815947] [ 93.815947] CPU0 [ 93.815947] ---- [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] <Interrupt> [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] *** DEADLOCK *** [ 93.815947] [ 93.815947] no locks held by swapper/0. [ 93.815947] [ 93.815947] stack backtrace: [ 93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815947] Call Trace: [ 93.815947] <IRQ> [<ffffffff814dfd00>] print_usage_bug+0x1e7/0x1f8 [ 93.815947] [<ffffffff8101a849>] ? save_stack_trace+0x2c/0x49 [ 93.815947] [<ffffffff8108d55c>] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0 [ 93.815947] [<ffffffff8108dc8a>] mark_lock+0x106/0x220 [ 93.815947] [<ffffffff8108e099>] __lock_acquire+0x2f5/0xd0c [ 93.815947] [<ffffffff810152af>] ? native_sched_clock+0x34/0x36 [ 93.830125] [<ffffffff810152ba>] ? sched_clock+0x9/0xd [ 93.830125] [<ffffffff81080181>] ? sched_clock_local+0x12/0x75 [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79 [ 93.830125] [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffff81422467>] ? skb_dequeue+0x62/0x6d [ 93.830125] [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [<ffffffffa025f677>] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi] [ 93.830125] [<ffffffff8106281f>] tasklet_action+0x8d/0xee [ 93.830125] [<ffffffff810629ce>] __do_softirq+0x112/0x25a [ 93.830125] [<ffffffff814f327c>] call_softirq+0x1c/0x30 [ 93.830125] [<ffffffff81010bf6>] do_softirq+0x4b/0xa1 [ 93.830125] [<ffffffff81062d7d>] irq_exit+0x5d/0xcf [ 93.830125] [<ffffffff814f3b7e>] do_IRQ+0x8e/0xa5 [ 93.830125] [<ffffffff814ea533>] common_interrupt+0x73/0x73 [ 93.830125] <EOI> [<ffffffff8108b825>] ? trace_hardirqs_off+0xd/0xf [ 93.830125] [<ffffffff812bb6d5>] ? intel_idle+0xe5/0x10c [ 93.830125] [<ffffffff812bb6d1>] ? intel_idle+0xe1/0x10c [ 93.830125] [<ffffffff813f8d5e>] cpuidle_idle_call+0x11c/0x1fe [ 93.830125] [<ffffffff8100e2ef>] cpu_idle+0xab/0x101 [ 93.830125] [<ffffffff814c6373>] rest_init+0xd7/0xde [ 93.830125] [<ffffffff814c629c>] ? csum_partial_copy_generic+0x16c/0x16c [ 93.830125] [<ffffffff81d4bbb0>] start_kernel+0x3dd/0x3ea [ 93.830125] [<ffffffff81d4b2c4>] x86_64_start_reservations+0xaf/0xb3 [ 93.830125] [<ffffffff81d4b140>] ? early_idt_handlers+0x140/0x140 [ 93.830125] [<ffffffff81d4b3ca>] x86_64_start_kernel+0x102/0x111 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=755154 Reported-by: vjain02@students.poly.edu Reported-and-tested-by: Oliver Paukstadt <pstadt@sourcentral.org> Cc: stable@vger.kernel.org Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: don't stop a single aggregation session twiceJohannes Berg2011-11-281-2/+8
| | | | | | | | | | | | | | | Nikolay noticed (by code review) that mac80211 can attempt to stop an aggregation session while it is already being stopped. So to fix it, check whether stop is already being done and bail out if so. Also move setting the STOPPING state into the lock so things are properly atomic. Cc: stable@vger.kernel.org Reported-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* nl80211: fix MAC address validationEliad Peller2011-11-281-2/+2
| | | | | | | | | | MAC addresses have a fixed length. The current policy allows passing < ETH_ALEN bytes, which might result in reading beyond the buffer. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Revert "rt2800pci: handle spurious interrupts"John W. Linville2011-11-221-6/+1
| | | | | | | | | This reverts commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Revert "rt2x00: handle spurious pci interrupts"John W. Linville2011-11-223-3/+3
| | | | | | | | | This reverts commit 23085d5796561625db4143a671f1de081f66ef08. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* prism54: potential memory corruption in prism54_get_essid()Dan Carpenter2011-11-211-1/+1
| | | | | | | "dwrq->length" is the capped version of "essid->length". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix regulatory NULL dereferenceJohannes Berg2011-11-211-0/+4
| | | | | | | | | | | | | By the time userspace returns with a response to the regulatory domain request, the wiphy causing the request might have gone away. If this is so, reject the update but mark the request as having been processed anyway. Cc: Luis R. Rodriguez <lrodriguez@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix endian bug in radiotap header generationHelmut Schaa2011-11-211-4/+4
| | | | | | | | | I intoduced this bug in commit a2fe81667410723d941a688e1958a49d67ca3346 "mac80211: Build TX radiotap header dynamically" Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix AMSDU rate printout in debugfs.Ben Greear2011-11-211-2/+2
| | | | | | | | | It was flipped. See section 7.3.2.56 of the 802.11n spec for details. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54spi: Fix workqueue deadlockMichael Büsch2011-11-171-2/+2
| | | | | | | | | | | | | priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54spi: Add missing spin_lock_initMichael Büsch2011-11-171-0/+1
| | | | | | | | | The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix efuse EEPROM reading on PPC32.Gertjan van Wingerde2011-11-171-1/+1
| | | | | | | | | | | | Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> CC: <stable@vger.kernel.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: handle spurious pci interruptsStanislaw Gruszka2011-11-173-3/+3
| | | | | | | | | | | | | | | | We have documented case of very bad performance issue on rt2800pci device, because it generate spurious interrupt, what cause irq line is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We already address that problem in separate patch by returning IRQ_HANDLED from interrupt handler. We think similar fix is needed for other rt2x00 PCI devices, because users report performance problems on these devices too. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2800pci: handle spurious interruptsStanislaw Gruszka2011-11-171-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices may generate spurious interrupts, we have to handle them otherwise interrupt line will be disabled with below message and driver will not work: [ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option) [ 2052.114339] Pid: 0, comm: swapper Tainted: P 2.6.35.6-48.fc14.x86_64 #1 [ 2052.114341] Call Trace: [ 2052.114342] <IRQ> [<ffffffff810a6e2b>] __report_bad_irq.clone.1+0x3d/0x8b [ 2052.114349] [<ffffffff810a6f93>] note_interrupt+0x11a/0x17f [ 2052.114352] [<ffffffff810a7a73>] handle_fasteoi_irq+0xa8/0xce [ 2052.114355] [<ffffffff8100c2ea>] handle_irq+0x88/0x90 [ 2052.114357] [<ffffffff8146f034>] do_IRQ+0x5c/0xb4 [ 2052.114360] [<ffffffff81469593>] ret_from_intr+0x0/0x11 [ 2052.114361] <EOI> [<ffffffff8102b7f9>] ? native_safe_halt+0xb/0xd [ 2052.114366] [<ffffffff81010f03>] ? need_resched+0x23/0x2d [ 2052.114367] [<ffffffff8101102a>] default_idle+0x34/0x4f [ 2052.114370] [<ffffffff81008325>] cpu_idle+0xaa/0xcc [ 2052.114373] [<ffffffff81461f2a>] start_secondary+0x24d/0x28e [ 2052.114374] handlers: [ 2052.114375] [<ffffffff81332944>] (usb_hcd_irq+0x0/0x7c) [ 2052.114378] [<ffffffffa00697da>] (rt2800pci_interrupt+0x0/0x18d [rt2800pci]) [ 2052.114384] Disabling IRQ #17 Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=658451 Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Net, libertas: Resolve memory leak in if_spi_host_to_card()Jesper Juhl2011-11-151-0/+1
| | | | | | | | | | | If we hit the default case in the switch in if_spi_host_to_card() we'll leak the memory we allocated for 'packet'. This patch resolves the leak by freeing the allocated memory in that case. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix sleep-while-atomic bug in powersaving code.Gertjan van Wingerde2011-11-152-2/+21
| | | | | | | | | | | | | | | | | | The generic powersaving code that determines after reception of a frame whether the device should go back to sleep or whether is could stay awake was calling rt2x00lib_config directly from RX tasklet context. On a number of the devices this call can actually sleep, due to having to confirm that the sleeping commands have been executed successfully. Fix this by moving the call to rt2x00lib_config to a workqueue call. This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672 Tested-by: Tomas Trnka <tomastrnka@gmx.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP.Gertjan van Wingerde2011-11-151-0/+1
| | | | | | | | | This is reported to be an RT3070 based device. Reported-by: Teika Kazura <teika@lavabit.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix association issue with AP configured in hidden SSID modeAmitkumar Karwar2011-11-111-2/+4
| | | | | | | | | | | | | | | Firmware expects 'max_ssid_length' field in 'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for performing SSID specific scan. Currently driver updates it with an actual SSID length. Hence UUT is not able to find the AP configured in hidden SSID mode in scan results and association fails. max_ssid_length is filled with '0' to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: avoid a panic when unloading the module with RF KillEmmanuel Grumbach2011-11-111-16/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When HW RF kill switch is set to kill the radio, our NIC issues an interrupt after we stop the APM module. When we unload the module, the driver disables and cleans the interrupts before stopping the APM. So we have a real interrupt (inta not zero) pending. When this interrupts pops up the tasklet has already been killed and we crash. Here is a logical description of the flow: disable and clean interrupts synchronize interrupts kill the tasklet stop the APM <<== creates an RF kill interrupt free_irq <<== somehow our ISR is called here and we crash Here is the panic message: [ 201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150 [ 201.314541] IP: [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160 [ 201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 201.317324] CPU 1 [ 201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs] [ 201.323839] [ 201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC [ 201.324736] RIP: 0010:[<ffffffff8106d652>] [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.325128] RSP: 0018:ffff88011bc43ea0 EFLAGS: 00010286 [ 201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028 [ 201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000 [ 201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000 [ 201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001 [ 201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8 [ 201.326431] FS: 00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000 [ 201.326657] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0 [ 201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000) [ 201.327747] Stack: [ 201.330494] 0000000000000046 0000000000000030 0000000000000001 0000000000000006 [ 201.333870] ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08 [ 201.337186] 0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006 [ 201.340458] Call Trace: [ 201.342994] <IRQ> [ 201.345656] [<ffffffff8106cd8a>] __do_softirq+0xca/0x250 [ 201.348185] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.350730] [<ffffffff8131aeae>] ? do_raw_spin_unlock+0x5e/0xb0 [ 201.353261] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.355776] [<ffffffff8163ccfc>] call_softirq+0x1c/0x30 [ 201.358287] [<ffffffff8101531d>] do_softirq+0x9d/0xd0 [ 201.360823] [<ffffffff8106cb05>] irq_exit+0xd5/0xf0 [ 201.363330] [<ffffffff8163d5d6>] do_IRQ+0x66/0xe0 [ 201.365819] [<ffffffff81632673>] common_interrupt+0x73/0x73 [ 201.368257] <EOI> Cc: <stable@kernel.org> 3.1+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix race between connection monitor & suspendJohannes Berg2011-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When the connection monitor timer fires right before suspend, the following will happen: timer fires -> monitor_work gets queued suspend calls ieee80211_sta_quiesce ieee80211_sta_quiesce: - deletes timer - cancels monitor_work synchronously, running it [note wrong order of these steps] monitor_work runs, re-arming the timer later, timer fires while system should be quiesced This causes a warning: WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]() but is otherwise harmless. I'm not completely sure this is the scenario Thomas stumbled across, but it is the only way I can right now see the warning in a scenario like the one he reported. Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: libertas: fix unaligned le64 accessesSteven Miao2011-11-091-1/+1
| | | | | | | | use get_unaligned_le64() to get timestamp Signed-off-by: Steven Miao <realmz6@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix bug on regulatory core exit on access to last_requestLuis R. Rodriguez2011-11-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added the .uevent() callback for the regulatory device used during the platform device registration. The change was done to account for queuing up udev change requests through udevadm triggers. The change also meant that upon regulatory core exit we will now send a uevent() but the uevent() callback, reg_device_uevent(), also accessed last_request. Right before commiting device suicide we free'd last_request but never set it to NULL so platform_device_unregister() would lead to bogus kernel paging request. Fix this and also simply supress uevents right before we commit suicide as they are pointless. This fix is required for kernels >= v2.6.39 $ git describe --contains 4d9d88d1 v2.6.39-rc1~468^2~25^2^2~21 The impact of not having this present is that a bogus paging access may occur (only read) upon cfg80211 unload time. You may also get this BUG complaint below. Although Johannes could not reproduce the issue this fix is theoretically correct. mac80211_hwsim: unregister radios mac80211_hwsim: closing netlink BUG: unable to handle kernel paging request at ffff88001a06b5ab IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: cfg80211(-) [last unloaded: mac80211] Pid: 2279, comm: rmmod Tainted: G W 3.1.0-wl+ #663 Bochs Bochs RIP: 0010:[<ffffffffa030df9a>] [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP: 0000:ffff88001c5f9d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0 RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0 R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001 FS: 00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780) Stack: ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189 Call Trace: [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81305307>] ? devres_release_all+0x27/0x60 [<ffffffff8124206b>] kobject_uevent+0xb/0x10 [<ffffffff812fee27>] device_del+0x157/0x1b0 [<ffffffff8130377d>] platform_device_del+0x1d/0x90 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211] [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211] [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b Code: <all your base are belong to me> RIP [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP <ffff88001c5f9d58> CR2: ffff88001a06b5ab ---[ end trace 147c5099a411e8c0 ]--- Reported-by: Johannes Berg <johannes@sipsolutions.net> Cc: Scott James Remnant <keybuk@google.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix bug in ieee80211_build_probe_reqJohannes Berg2011-11-091-0/+4
| | | | | | | | | | ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix NULL dereference in radiotap codeJohannes Berg2011-11-091-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc88518916793af8ad6a02e05ff254d95c36d875 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by: Xiaokang Qin <xiaokang.qin@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids ↵Eyal Shapira2011-11-081-1/+1
| | | | | | | | | | | are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath: Fix NULL ptr dereference in ath_reg_apply_world_flagsHelmut Schaa2011-11-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix missing kernel-docJohannes Berg2011-11-081-0/+4
| | | | | | | Two new struct members were not documented, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2011-11-084-11/+17
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
| * Bluetooth: Add support for Broadcom BCM20702A0Wen-chien Jesse Sung2011-11-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Use miliseconds for L2CAP channel timeoutsAndrzej Kaczmarek2011-11-072-10/+13
| | | | | | | | | | | | | | | | | | | | | | Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Revert: Fix L2CAP connection establishmentArek Lichwa2011-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit settingJanusz.Dziedzic@tieto.com2011-11-071-4/+4
| | | | | | | | | | | | | | | | | | Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered frames (more than one) only for one AC. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params()Jesper Juhl2011-11-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211: fix cmp_iesJohannes Berg2011-11-071-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211: allow setting TXQ parameters only in AP modeJohannes Berg2011-11-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | In other modes the parameters should not be set. Right now, mac80211 will set them, even if the user asked for setting them on VLANs which the driver doesn't know about, causing all kinds of trouble. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | nl80211: fix HT capability attribute validationJohannes Berg2011-11-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: use min rate as basic rate for buggy APsEliad Peller2011-11-071-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | Some buggy APs (and even P2P_GO) don't advertise their basic rates in the association response. In such case, use the min supported rate as the basic rate. Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | brcm80211: smac: eliminate a null pointer dereference in dma.cArend van Spriel2011-11-071-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall <julia@diku.dk> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | b43: HT-PHY: report signal to mac80211Rafał Miłecki2011-11-072-1/+22
| | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | b43: fill ctl1 word on all newer PHYs, fix PHY errorsRafał Miłecki2011-11-071-2/+6
| | | | | | | | | | | | | | | | | | This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: warn only once about not finding a rateJohannes Berg2011-11-041-1/+2
|/ | | | | | | | | | The warning really shouldn't happen, but until we find the reason why it does don't spew it all the time, just once is enough to know we've hit it. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: don't perform "echo test" when cmd queue stuckWey-Yi Guy2011-11-021-10/+0
| | | | | | | | | | Perform "echo test" when cmd queue stuck detected, somethime it will cause calltrace. I am not sure how to fix it yet, just remove the action now until find a better way to handle it. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Remove unneeded messageLarry Finger2011-11-021-1/+0
| | | | | | | | | | The driver can spam the logs with "RX: Packet dropped" messages. These drops originate from 1. a correpted PLCP, 2. decryption errors, and 3. packet size underruns. Condition #3 logs a separate message, thus no dropped message is needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: disable powersave for broken APsJohannes Berg2011-11-022-2/+17
| | | | | | | | | | | | | | | Only AID values 1-2007 are valid, but some APs have been found to send random bogus values, in the reported case an AP that was sending the AID field value 0xffff, an AID of 0x3fff (16383). There isn't much we can do but disable powersave since there's no way it can work properly in this case. Cc: stable@vger.kernel.org Reported-by: Bill C Riemers <briemers@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: allow pci_enable_msi failWey-Yi Guy2011-11-021-5/+3
| | | | | | | | | | | Continue the init process even fail to enable msi out_iounmap is no longer used, remove it Reported-by: werner <w.landgraf@ru.ru> Tested-by: werner <w.landgraf@ru.ru> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: ensure we clean up a scan request properlyAndres Salomon2011-11-023-12/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2e30168b ("libertas: terminate scan when stopping interface") adds cleanup code to lbs_eth_stop to call cfg80211_scan_done if there's an outstanding cfg80211_scan_request. However, it assumes that the scan request was allocated via the cfg80211 stack. Libertas has its own internal allocation method, kept track of with priv->internal_scan. This doesn't set scan_req->wiphy, amongst other things, which results in hitting a BUG() when we call cfg80211_scan_done on the request. This provides a function to take care of the low-level scan_req cleanup details. We simply call that to deal with finishing up scan requests. The bug we were hitting was: [ 964.321495] kernel BUG at net/wireless/core.h:87! [ 964.329970] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 964.341963] pgd = dcf80000 ... [ 964.849998] 9fe0: 00000000 beb417b8 4018e280 401e822c 60000010 00000004 00000000 00000000 [ 964.865007] [<c003104c>] (__bug+0x1c/0x28) from [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) [ 964.895324] [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) from [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) [ 964.895324] [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) from [<c03002a0>] (__dev_close_many+0x94/0xc4) [ 964.918995] [<c03002a0>] (__dev_close_many+0x94/0xc4) from [<c030037c>] (dev_close_many+0x78/0xe0) Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Fix noise floor calibration timeout on fast channel changeRajkumar Manoharan2011-11-023-7/+3
| | | | | | | | | | | During the fast channel change noise floor values are being loaded twice at init_cal and after channel_change. The commit "ath9k_hw: Improve fast channel change for AR9003 chips" overlooked it that caused failure to load nf while doing bgscan. This patch performs noise floor calibration after the fast and full reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Update AR9485 initvals to fix system hang issueRajkumar Manoharan2011-11-021-5/+5
| | | | | | | | | This patch fixes system hang when resuming from S3 state and lower rate sens failure issue. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud