summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devicesBenoit Cousson2012-03-071-0/+52
| | | | | | | | | | | | | | | | | | | | | Update DTS file with required clock frequencies for the i2c client devices existing on sdp4430. Add the twl6030 node inside the i2c1 controller node. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add the RTC submodule inside the twl node. Add tmp105 temperature sensor in i2c3 Add bh1780 Ambient Light Sensor in i2c3 Add hmc5843 3-Axis Digital Compass in i2c4 Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: omap4-panda: Add twl6030 and i2c EEPROMBenoit Cousson2012-03-071-0/+34
| | | | | | | | | | | | | | | | | | Update pandaboard dts file with required clock frequencies for the i2c client devices existing on pandaboard. Add the twl6030 node in i2c1 controller. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add a generic i2c EEPROM entry. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: twl4030: Add DTS file for twl4030 PM + Audio ICBenoit Cousson2012-03-071-0/+21
| | | | | | | | | | Add a dedicated DTS file for the twl4030/5030 Power + Audio IC. This chip is a big SoC that will be reused in a lot of various OMAP3 boards. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: twl6030: Add DTS file for twl6030 PMICBenoit Cousson2012-03-071-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a dedicated DTS file for the twl6030 Power IC. This chip is a big SoC that will be reused in a lot of various OMAP4+ boards. Note: This file is supposed to be included in a board DTS that will create the twl node in order to allow the &twl reference to work. Exmaple: ... &i2c1 { twl: twl@48 { reg = <0x48>; interrupts = <0 7 4>; interrupt-controller; interrupt-parent = <&gic>; }; }; /include/ "twl6030.dtsi" ... Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux boardIlya Yanok2012-03-051-0/+27
| | | | | | | | | | | Very basic support for TeeJet Mt.Ventoux board. Able to boot via board-generic and ramdisk/initramfs, however most of peripherals are not supported. Produces tons of twl4030 related errors as this board doesn't have twl4030 installed. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Remove extra ifdefs for board-genericTony Lindgren2012-03-051-44/+32
| | | | | | | | | | We need just one ifdef for each ARCH_OMAP2/3/4. Also remove the comment about i2c & twl driver as it's pretty obvious that we still need some platform data until drivers are converted to device tree. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selectedTony Lindgren2012-03-051-0/+7
| | | | | | | | | | Otherwise we'll get undefined reference to `gic_of_init' or undefined reference to `omap_intc_of_init'. This was caused by commit fbf75da733e82bb17a01e1b907b0e40d9c028823 (ARM: OMAP2+: board-generic: Use of_irq_init API). Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for_3.4/dt_irq_domain' of ↵Tony Lindgren2012-02-2990-2628/+1543
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into dt-part2
| * ARM: OMAP2+: board-generic: Use of_irq_init APIBenoit Cousson2012-02-271-14/+16
| | | | | | | | | | | | | | | | | | | | | | | | Use the of_irq_init API introduced in 3.2 to handle interrupt-controller with DT. Update the irq_match table to map the proper XXX_of_init functions for INTC and GIC drivers. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * arm/dts: OMAP3: Add interrupt-controller bindings for INTCBenoit Cousson2012-02-271-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Update the DTS with the proper information required by the INTC bindings. - Add the number of interrupt lines - Add the reg and the compatible entries. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * ARM: OMAP2/3: intc: Add DT support for TI interrupt controllerBenoit Cousson2012-02-273-10/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a function to initialize the OMAP2/3 interrupt controller (INTC) using a device tree node. This version take advantage of the new irq_domain_add_legacy API. Replace some printk() with the proper pr_ macro. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * Merge branch 'irqdomain/next' of git://git.secretlab.ca/git/linux-2.6 into ↵Benoit Cousson2012-02-2786-2603/+1435
| |\ |/ / | | | | for_3.4/dt_irq_domain2
| * mfd: twl-core: Add IRQ_DOMAIN dependencyGrant Likely2012-02-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | TWL4030 depends on IRQ_DOMAIN support, so this patch selects it in Kconfig. It used to be that CONFIG_IRQ_DOMAIN must only be selected by the architecture, but recent cleanups have fixed it so that it is safe to select from anywhere. Signed-off-by: Benoit Cousson <b-cousson@ti.com> [grant.likely: Changed from a depends to a select] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com>
| * devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc)Grant Likely2012-02-263-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | Sparc has its own helpers for translating address ranges when the device tree is parsed at boot time, and it isn't able to use of_platform_populate(). However, there are some device drivers that want to use that function on other DT enabled platforms (ie. TWL4030). This patch adds an empty of_platform_populate() implementation that returns an error when CONFIG_OF_ADDRESS is not selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com>
| * irq_domain: Centralize definition of irq_dispose_mapping()Grant Likely2012-02-264-22/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several architectures define their own empty irq_dispose_mapping(). Since the irq_domain code is centralized now, there is little need to do so. This patch removes them and creates a new empty copy when !CONFIG_IRQ_DOMAIN is selected. The patch also means that IRQ_DOMAIN becomes selectable on all architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: sparclinux@vger.kernel.org Cc: linux@lists.openrisc.net
| * irq_domain/mips: Allow irq_domain on MIPSGrant Likely2012-02-244-18/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes IRQ_DOMAIN usable on MIPS. It uses an ugly workaround to preserve current behaviour so that MIPS has time to add irq_domain registration to the irq controller drivers. The workaround will be removed in Linux v3.6 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org
| * irq_domain/x86: Convert x86 (embedded) to use common irq_domainGrant Likely2012-02-235-95/+34
| | | | | | | | | | | | | | | | | | | | This patch removes the x86-specific definition of irq_domain and replaces it with the common implementation. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de>
| * ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.cPaul Gortmaker2012-02-222-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit bae1d8f19983fbfa25559aa3cb6a81a84aa82a18 (linux-next) "irq_domain/powerpc: Use common irq_domain structure instead of irq_host" made this change: -static struct irq_host *flipper_irq_host; +static struct irq_domain *flipper_irq_host; and this change: -static struct irq_host *hlwd_irq_host; +static struct irq_domain *hlwd_irq_host; The intent was to change the type, and not the name, but then in a couple of instances, it looks like the sed to change the irq_domain_ops name inadvertently also changed the irq_host name where it was not supposed to, causing build failures. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * irq_domain/microblaze: Convert microblaze to use irq_domainsGrant Likely2012-02-165-99/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts Microblaze to use the irq_domain remapper and get away from hard coding the offset between hwirq number and the linux irq number space. This also paves the way for multiple interrupt controllers. v2: Don't enable SPARSE_IRQ and keep NR_IRQS set to 33 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Michal Simek <monstr@monstr.eu> Cc: Rob Herring <rob.herring@calxeda.com> Cc: John Williams <john.williams@petalogix.com> Cc: John Linn <john.linn@xilinx.com>
| * irq_domain/powerpc: Replace custom xlate functions with library functionsGrant Likely2012-02-167-97/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts a number of the powerpc drivers to use the common library of irq_domain xlate functions, dropping a bunch of lines in the process. v5: - Remove tsi108 changes from patch Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain/powerpc: constify irq_domain_opsGrant Likely2012-02-1622-22/+22
| | | | | | | | | | | | | | | | | | | | Make all the irq_domain_ops structures in powerpc 'static const' Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain/c6x: Use library of xlate functionsGrant Likely2012-02-162-13/+2
| | | | | | | | | | | | | | | | | | The c6x irq controllers don't need to define custom .xlate hooks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
| * irq_domain/c6x: constify irq_domain structuresGrant Likely2012-02-163-3/+3
| | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
| * irq_domain/c6x: Convert c6x to use generic irq_domain support.Mark Salter2012-02-164-849/+21
| | | | | | | | | | | | | | | | | | | | | | | | The C6X IRQ support was copied almost verbatim from the PowerPC virtual IRQ code. The PowerPC code was used as the basis for generic irq_domain support, so this patch mostly copies what what done to arch/powerpc by Grant Likely in his irq_domain patch series. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de>
| * irq_domain: constify irq_domain_opsGrant Likely2012-02-163-24/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Create common xlate functions that device drivers can useGrant Likely2012-02-162-10/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than having each interrupt controller driver creating its own barely unique .xlate function for irq_domain, create a library of translators which any driver can use directly. v5: - Remove irq_domain_xlate_pci(). It was incorrect. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Remove irq_domain_add_simple()Grant Likely2012-02-168-22/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | irq_domain_add_simple() was a stop-gap measure until complete irq_domain support was complete. This patch removes the irq_domain_add_simple() interface. This patch also drops the explicit irq_domain initialization performed by the mach-versatile code because the versatile interrupt controller already has irq_domain support built into it. This was a bug that was hanging around quietly for a while, but with the full irq_domain which actually verifies that irq_domain ranges are available it would cause the registration to fail and the system wouldn't boot. v4: Fixed number of irqs in mx5 gpio code v2: Updated to pass in host_data pointer on irq_domain allocation. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Remove 'new' irq_domain in favour of the ppc oneGrant Likely2012-02-169-263/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the simplistic implementation of irq_domains and enables the powerpc infrastructure for all irq_domain users. The powerpc infrastructure includes support for complex mappings between Linux and hardware irq numbers, and can manage allocation of irq_descs. This patch also converts the few users of irq_domain_add()/irq_domain_del() to call irq_domain_add_legacy() instead. v3: Fix bug that set up too many irqs in translation range. v2: Fix removal of irq_alloc_descs() call in gic driver Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * mfd: twl-core.c: Fix the number of interrupts managed by twl4030Benoit Cousson2012-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | TWL4030 does handle 3 different interrupts ranges: 8 for the core, 8 for the power events and 18 for the GPIOs. Change the total number of interrupts managed by TWL4030 from 8 to 34. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * of/address: add empty static inlines for !CONFIG_OFGrant Likely2012-02-161-4/+29
| | | | | | | | | | | | | | | | As the title says, this patch adds empty implementations for the address translation functions so that they can be used when CONFIG_OF is disabled. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com>
| * irq_domain: Add support for base irq and hwirq in legacy mappingsGrant Likely2012-02-165-38/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Replace irq_alloc_host() with revmap-specific initializersGrant Likely2012-02-1635-185/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Remove references to old irq_host namesGrant Likely2012-02-161-111/+108
| | | | | | | | | | | | | | | | | | | | | | No functional changes. Replaces non-exported references to 'host' with domain. Does not change any symbol names referenced by other .c files. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: remove NO_IRQ from irq domain codeGrant Likely2012-02-161-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | zero always means no irq when using irq domains. Get rid of the NO_IRQ references. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Move irq_domain code from powerpc to kernel/irqGrant Likely2012-02-165-650/+643
| | | | | | | | | | | | | | | | | | | | | | This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain/powerpc: Eliminate virq_is_host()Grant Likely2012-02-163-14/+6
| | | | | | | | | | | | | | | | | | | | There is only one user, and it is trivial to open-code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() insteadGrant Likely2012-02-142-198/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch drops the powerpc-specific irq_map table and replaces it with directly using the irq_alloc_desc()/irq_free_desc() interfaces for allocating and freeing irq_desc structures. This patch is a preparation step for generalizing the powerpc-specific virq infrastructure to become irq_domains. As part of this change, the irq_big_lock is changed to a mutex from a raw spinlock. There is no longer any need to use a spin lock since the irq_desc allocation code is now responsible for the critical section of finding an unused range of irq numbers. The radix lookup table is also changed to store the irq_data pointer instead of the irq_map entry since the irq_map is removed. This should end up being functionally equivalent since only allocated irq_descs are ever added to the radix tree. v5: - Really don't ever allocate virq 0. The previous version could still do it if hint == 0 - Respect irq_virq_count setting for NOMAP. Some NOMAP domains cannot use virq values above irq_virq_count. - Use numa_node_id() when allocating irq_descs. Ideally the API should obtain that value from the caller, but that touches a lot of call sites so will be deferred to a follow-on patch. - Fix irq_find_mapping() to include irq numbers lower than NUM_ISA_INTERRUPTS. With the switch to irq_alloc_desc*(), the lowest possible allocated irq is now returned by arch_probe_nr_irqs(). v4: - Fix incorrect access to irq_data structure in debugfs code - Don't ever allocate virq 0 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain/powerpc: Use common irq_domain structure instead of irq_hostGrant Likely2012-02-1443-348/+277
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch drops the powerpc-specific irq_host structures and uses the common irq_domain strucutres defined in linux/irqdomain.h. It also fixes all the users to use the new structure names. Renaming irq_host to irq_domain has been discussed for a long time, and this patch is a step in the process of generalizing the powerpc virq code to be usable by all architecture. An astute reader will notice that this patch actually removes the irq_host structure instead of renaming it. This is because the irq_domain structure already exists in include/linux/irqdomain.h and has the needed data members. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: convert microblaze from irq_host to irq_domainGrant Likely2012-02-143-5/+3
| | | | | | | | | | | | | | | | Trivial change, microblaze doesn't use irq remapping yet. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Gleixner <tglx@linutronix.de>
| * irq_domain: Make irq_domain structure match powerpc's irq_hostGrant Likely2012-02-143-34/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Be less verboseGrant Likely2012-02-141-3/+1
| | | | | | | | | | | | | | | | | | irq_domain printk's too much. Drop some output. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: add documentation and MAINTAINERS entry.Grant Likely2012-02-142-0/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation for irq_domain library which will be created in subsequent patches. v4: editorial changes Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
* | Merge branch 'for_3.4/dts_updates' of ↵Tony Lindgren2012-02-24503-43050/+3866
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into dt
| * | arm/dts: Add support for TI OMAP3 EVM boardVaibhav Hiremath2012-02-241-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add OMAP3 EVM (OMAP3530, AM/DM37x) DTS file to use the omap3.dtsi SoC file, along with memory node information. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * | arm/dts: OMAP4: Update DTS file with new GIC bindingsBenoit Cousson2012-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The GIC binding was updated in 3.2 and expects 3 interrupt-cells. - Update the #interrupt-cells Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
| * | arm/dts: OMAP3: Add i2c controller nodesBenoit Cousson2012-02-241-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
| * | arm/dts: OMAP4: Add i2c controller nodesBenoit Cousson2012-02-241-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * | Linux 3.3-rc4v3.3-rc4Linus Torvalds2012-02-181-1/+1
| | |
| * | Merge tag 'fixes-3.3-rc4' of ↵Linus Torvalds2012-02-1866-786/+524
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc. The majority of them are regression fixes for stuff that broke during the merge 3.3 window. The notable ones are: * The at91 ata drivers both broke because of an earlier cleanup patch that some other patches were based on. Jean-Christophe decided to remove the legacy at91_ide driver and fix the new-style at91-pata driver while keeping the cleanup patch. I almost rejected the patches for being too late and too big but in the end decided to accept them because they fix a regression. * A patch fixing build breakage from the sysdev-to-device conversion colliding with other changes touches a number of mach-s3c files. * b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup" is a mechanical change that unfortunately touches a lot of lines that should up in the diffstat. * tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module ep93xx: fix build of vision_ep93xx.c ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: orion: Fix USB phy for orion5x. ARM: orion: Fix Orion5x GPIO regression from MPP cleanup ARM: EXYNOS: Add cpu-offset property in gic device tree node ARM: EXYNOS: Bring exynos4-dt up to date ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board ARM: EXYNOS: Correct framebuffer window size on Nuri board ARM: SAMSUNG: Fix missing api-change from subsys_interface change ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type" ...
| | * \ Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann2012-02-1311-437/+140
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module
OpenPOWER on IntegriCloud