summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differencesJames Smart2009-06-1510-219/+224
| | | | | | | | | | | | | | | | | | | | | Contains the following changes - Set the CT field of FDISC to 3 - Fixed over allocation of SCSI buffers on SLI4 - Removed unused jump table entries - Increase LPFC_WQE_DEF_COUNT to 256 - Updated FDISC context to VPI - Fixed immediate SCSI command for LUN reset translation to WQE - Extended mailbox handling to allow MBX_POLL commands in between async MBQ commands - Fixed SID used for FDISC - Fix crash when accessing ctlregs from sysfs for SLI4 HBAs - Fix SLI4 firmware version not being saved or displayed correctly - Expand CQID field in WQE structure to 16 bits - Fix post header template mailbox command timing out - Removed FCoE PCI device ID 0x0705 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Resolve a performance issue in interruptAnirban Chakraborty2009-06-151-6/+9
| | | | | | | | | | Reverted back a change in qla*_intr_handler code that caused an increase in cpu cycles by allowing interrupts to occur while the instance hardware lock was being held. Fix by taking the lock in irqsave mode. Reported-and-tested-by: Douglas W. Styner <douglas.w.styner@intel.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.Michael Chan2009-06-152-2/+4
| | | | | | | | CNIC and BNX2I must depend on PCI. Dependencies do not get propagated through select. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] nsp_cs: time_out reaches -1Roel Kluin2009-06-151-3/+3
| | | | | | | | | With a postfix decrement timeouts will reach -1 rather than 0, so the errors do not appear. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: fix printk format warningsRandy Dunlap2009-06-151-2/+5
| | | | | | | | | | | | | | Fix qla2xxx printk format warnings: drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:915: warning: long long unsigned int format, u64 arg (arg 6) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 5) drivers/scsi/qla2xxx/qla_sup.c:923: warning: long long unsigned int format, u64 arg (arg 6) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] ncr53c8xx: div reaches -1Roel Kluin2009-06-151-1/+1
| | | | | | | | With while(--div >= 0) { ... } div reaches -1. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] compat: don't perform unneeded copy in sg_io codeAlexey Zaytsev2009-06-151-6/+0
| | | | | | | | | | | | The members from 'status' in struct sg_io_hdr to the last are used to transfer information from kernel to user space. The values that user space sets are just ignored. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Update FC pass-through supportChristof Schmitt2009-06-122-7/+5
| | | | | | | | | | | | Don't access the block layer request, get the payload length instead from the FC job. Simplify access to the zfcp_port, only the d_id is required, if the port is no longer accessed later. This is possible when the els_handler does not access the port pointer from the ELS request. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Add FC pass-through supportSven Schuetz2009-06-126-20/+219
| | | | | | | | | | | Provide the ability to do fibre channel requests from the userspace to our zfcp driver. Patch builds upon extension to the fibre channel tranport class by James Smart and Seokmann Ju. See here http://marc.info/?l=linux-scsi&m=123808882309133&w=2 Signed-off-by: Sven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] FC Pass Thru supportJames Smart2009-06-128-5/+1016
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attached is the ELS/CT pass-thru patch for the FC Transport. The patch creates a generic framework that lays on top of bsg and the SGIO v4 ioctl in order to pass transaction requests to LLDD's. The interface supports the following operations: On an fc_host basis: Request login to the specified N_Port_ID, creating an fc_rport. Request logout of the specified N_Port_ID, deleting an fc_rport Send ELS request to specified N_Port_ID w/o requiring a login, and wait for ELS response. Send CT request to specified N_Port_ID and wait for CT response. Login is required, but LLDD is allowed to manage login and decide whether it stays in place after the request is satisfied. Vendor-Unique request. Allows a LLDD-specific request to be passed to the LLDD, and the passing of a response back to the application. On an fc_rport basis: Send ELS request to nport and wait for ELS response. Send CT request to nport and wait for CT response. The patch also exports several headers from include/scsi such that they can be available to user-space applications: include/scsi/scsi.h include/scsi/scsi_netlink.h include/scsi/scsi_netlink_fc.h include/scsi/scsi_bsg_fc.h For further information, refer to the last RFC: http://marc.info/?l=linux-scsi&m=123436574018579&w=2 Note: Documentation is still spotty and will be added later. [bharrosh@panasas.com: update for new block API] Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-06-12213-4034/+33616
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (290 commits) ALSA: pcm - Update document about xrun_debug proc file ALSA: lx6464es - support standard alsa module parameters ALSA: snd_usb_caiaq: set mixername ALSA: hda - add quirk for STAC92xx (SigmaTel STAC9205) ALSA: use card device as parent for jack input-devices ALSA: sound/ps3: Correct existing and add missing annotations ALSA: sound/ps3: Restructure driver source ALSA: sound/ps3: Fix checkpatch issues ASoC: Fix lm4857 control ALSA: ctxfi - Clear PCM resources at hw_params and hw_free ALSA: ctxfi - Check the presence of SRC instance in PCM pointer callbacks ALSA: ctxfi - Add missing start check in atc_pcm_playback_start() ALSA: ctxfi - Add use_system_timer module option ALSA: usb - Add boot quirk for C-Media 6206 USB Audio ALSA: ctxfi - Fix wrong model id for UAA ALSA: ctxfi - Clean up probe routines ALSA: hda - Fix the previous tagra-8ch patch ALSA: hda - Add 7.1 support for MSI GX620 ALSA: pcm - A helper function to compose PCM stream name for debug prints ALSA: emu10k1 - Fix minimum periods for efx playback ...
| * Merge branch 'topic/ps3' into for-linusTakashi Iwai2009-06-121-351/+304
| |\ | | | | | | | | | | | | | | | | | | * topic/ps3: ALSA: sound/ps3: Correct existing and add missing annotations ALSA: sound/ps3: Restructure driver source ALSA: sound/ps3: Fix checkpatch issues
| | * ALSA: sound/ps3: Correct existing and add missing annotationsGeert Uytterhoeven2009-06-101-6/+6
| | | | | | | | | | | | | | | | | | | | | probe functions should be __devinit Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: sound/ps3: Restructure driver sourceGeert Uytterhoeven2009-06-101-333/+288
| | | | | | | | | | | | | | | | | | | | | | | | | | | Sort includes, and reorder code so we can kill the forward declarations No functional changes Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * ALSA: sound/ps3: Fix checkpatch issuesGeert Uytterhoeven2009-06-101-17/+15
| | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | Merge branch 'topic/pcm-jiffies-check' into for-linusTakashi Iwai2009-06-121-14/+22
| |\ \ | | | | | | | | | | | | | | | | * topic/pcm-jiffies-check: ALSA: pcm - Update document about xrun_debug proc file
| | * | ALSA: pcm - Update document about xrun_debug proc fileTakashi Iwai2009-06-111-14/+22
| | | | | | | | | | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | Merge branch 'topic/misc' into for-linusTakashi Iwai2009-06-121-1/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | * topic/misc: ALSA: use card device as parent for jack input-devices
| | * | | ALSA: use card device as parent for jack input-devicesKay Sievers2009-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the jack devices from the PCI device into the ALSA card device, which makes it easier for userspace to find all devices belonging to a specific card while granting access to logged-in users. Jack input devices from sound cards can now simply be matched with udev by doing: SUBSYSTEM="input", SUBSYSTEMS="sound", ... ls -l /sys/devices/pci0000:00/0000:00:1b.0/sound/card0 controlC0 device -> ../../../0000:00:1b.0 id input10 input11 input8 input9 number pcmC0D0c pcmC0D0p pcmC0D1p power subsystem -> ../../../../../class/sound uevent Cc: Lennart Poettering <lennart@0pointer.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | Merge branch 'topic/lx6464es' into for-linusTakashi Iwai2009-06-121-0/+7
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * topic/lx6464es: ALSA: lx6464es - support standard alsa module parameters
| | * | | | ALSA: lx6464es - support standard alsa module parametersTim Blechmann2009-06-111-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trivial patch to support the alsa module parameters `index', `id' and `enable' Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | Merge branch 'topic/hda' into for-linusTakashi Iwai2009-06-121-0/+3
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/hda: ALSA: hda - add quirk for STAC92xx (SigmaTel STAC9205)
| | * | | | | ALSA: hda - add quirk for STAC92xx (SigmaTel STAC9205)Simos Xenitellis2009-06-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A quirk is required for 8086:284b (rev 03) [Subsystem: 161f:2073]. The following has been tested with Alsa 1.0.20 (git master). Background details can be found at https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4561 http://forum.ubuntu-gr.org/viewtopic.php?f=38&t=5290 Tested-by: Theodora Iliopoulou <th30dr@gmail.com> Signed-off-by: Simos Xenitellis <simos@gnome.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | Merge branch 'topic/caiaq' into for-linusTakashi Iwai2009-06-121-1/+2
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/caiaq: ALSA: snd_usb_caiaq: set mixername
| | * | | | | | ALSA: snd_usb_caiaq: set mixernameDaniel Mack2009-06-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | alsamixer and friends want the mixername to be set. Even though the driver does not exports a real mixer device, export the name doesn't harm. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | Merge branch 'topic/asoc' into for-linusTakashi Iwai2009-06-121-6/+10
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/asoc: ASoC: Fix lm4857 control
| | * | | | | | | ASoC: Fix lm4857 controlMark Brown2009-06-101-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4eaa9819dc08d7bfd1065ce530e31b18a119dcaf changed semantics of private_value member of kcontrol. This resulted in inability to control amplifier and subsequently in very low output volume. Tested-by: Johannes Schauer <josch@pyneo.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | | | | | | Merge branch 'topic/usb-audio' into for-linusTakashi Iwai2009-06-102-0/+68
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/usb-audio: ALSA: usb - Add boot quirk for C-Media 6206 USB Audio ALSA: usb-audio - errata corrige for quirk ALSA: usb-audio - Add quirk for Roland/Edirol M-16DX ALSA: usb-audio - quirk for USB Aureon cards
| | * | | | | | | | ALSA: usb - Add boot quirk for C-Media 6206 USB AudioDan Allongo2009-06-081-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added boot quirk for C-Media CM6206 device in snd_usb_audio_probe. The function snd_usb_cm6206_boot_quirk sets up six internal 16-bit registers in order to initialize the device. Values for the registers came from sniffing USB traffic under Windows since only four of the six are documented in the datasheet for CM106 and some reserved bits were also being set. [Minor coding-style fixes by tiwai] Signed-off-by: Dan Allongo <gongo2k1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | ALSA: usb-audio - errata corrige for quirkAndrea Borgia2009-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cut'n'paste mistake, whose likely result was nothing at all. Correct version is "USB_DEVICE", not "USB_DEVICE_VENDOR_SPEC". Signed-off-by: Andrea Borgia <andrea@borgia.bo.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | ALSA: usb-audio - Add quirk for Roland/Edirol M-16DXTakashi Iwai2009-06-011-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added a half-working quirk for Roland/Edirol M-16DX. This enables the capture on the device but the playback on it seems still problematic becuase of lack of sync with the capture clock. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | ALSA: usb-audio - quirk for USB Aureon cardsAndrea Borgia2009-06-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add quirk to provide proper naming of the Terratec Aureon 5.1 MkII USB card. Signed-off-by: Andrea Borgia <andrea@borgia.bo.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | | Merge branch 'topic/seq-kconfig-cleanup' into for-linusTakashi Iwai2009-06-109-69/+31
| |\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/seq-kconfig-cleanup: ALSA: clean up the logic for building sequencer modules
| | * | | | | | | | | ALSA: clean up the logic for building sequencer modulesMichal Marek2009-05-299-69/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of mangling the CONFIG_* variables in the makefiles over and over, set a few helper variables in Kconfig. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | | | Merge branch 'topic/section-fix' into for-linusTakashi Iwai2009-06-1010-59/+59
| |\ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/section-fix: ALSA: Add missing __devexit_p() markers ALSA: powermac - Replace the rest of __init* ALSA: sound/ppc: update annotations of serveral functions
| | * | | | | | | | | | ALSA: Add missing __devexit_p() markersJean Delvare2009-06-043-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3 ISA sound drivers lack their __devexit_p() markers, which would cause build failures when the kernel is built without hotplug support. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | ALSA: powermac - Replace the rest of __init*Takashi Iwai2009-06-034-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All __initdata should be __devinitdata as platform device is hotpluggable. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | ALSA: sound/ppc: update annotations of serveral functionsStephen Rothwell2009-06-037-12/+12
| | | |/ / / / / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [I am not sure if this is the correct approach as I don't know if any of this actual hardware or drivers are really hot pluggable.] Gets rid of these build warnings: WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x5c): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_new() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_new(). If .snd_pmac_new is only used by .snd_pmac_probe then annotate .snd_pmac_new with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x10c): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_burgundy_init() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_burgundy_init(). If .snd_pmac_burgundy_init is only used by .snd_pmac_probe then annotate .snd_pmac_burgundy_init with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x164): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_daca_init() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_daca_init(). If .snd_pmac_daca_init is only used by .snd_pmac_probe then annotate .snd_pmac_daca_init with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x1dc): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_tumbler_init() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_tumbler_init(). If .snd_pmac_tumbler_init is only used by .snd_pmac_probe then annotate .snd_pmac_tumbler_init with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x1ec): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_tumbler_post_init() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_tumbler_post_init(). If .snd_pmac_tumbler_post_init is only used by .snd_pmac_probe then annotate .snd_pmac_tumbler_post_init with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x28c): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_awacs_init() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_awacs_init(). If .snd_pmac_awacs_init is only used by .snd_pmac_probe then annotate .snd_pmac_awacs_init with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x2bc): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_pcm_new() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_pcm_new(). If .snd_pmac_pcm_new is only used by .snd_pmac_probe then annotate .snd_pmac_pcm_new with a matching annotation. WARNING: sound/ppc/snd-powermac.o(.devinit.text+0x2f8): Section mismatch in reference from the function .snd_pmac_probe() to the function .init.text:.snd_pmac_attach_beep() The function __devinit .snd_pmac_probe() references a function __init .snd_pmac_attach_beep(). If .snd_pmac_attach_beep is only used by .snd_pmac_probe then annotate .snd_pmac_attach_beep with a matching annotation. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | | | Merge branch 'topic/sc6000' into for-linusTakashi Iwai2009-06-103-31/+114
| |\ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/sc6000: ALSA: sc6000: enable joystick port ALSA: sc6000: fix older card initialization ALSA: sc6000: add support for SC-6600 and SC-7000
| | * | | | | | | | | | ALSA: sc6000: enable joystick portKrzysztof Helt2009-05-042-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add module parameter to enable or disable joystick port (gameport) on the SC6600 and later cards. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | ALSA: sc6000: fix older card initializationKrzysztof Helt2009-04-241-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The last patch to handle newer cards like SC7000 broke initialization of the SC6000. Fix this. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | ALSA: sc6000: add support for SC-6600 and SC-7000Krzysztof Helt2009-04-142-30/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for later cards based on CompuMedia ASC-9408 chipsets. These cards were produced by Gallant. This patch make the OSS aedsp16 driver redundant. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | | | | Merge branch 'topic/riptide' into for-linusTakashi Iwai2009-06-101-187/+160
| |\ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/riptide: ALSA: riptide - Fix joystick resource handling ALSA: riptide - Code clean up
| | * | | | | | | | | | | ALSA: riptide - Fix joystick resource handlingTakashi Iwai2009-05-261-35/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code doesn't handle the multiple gameports properly, and uses unnecessary global static variables to store the data. This patch changes the probe / remove routines to use the driver data assigned to the dedicated pci device, and adds the support of multiple devices. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | | ALSA: riptide - Code clean upTakashi Iwai2009-05-261-152/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A code clean up, coding style fixes. The firmware loading routine is split to an own function to improve the readability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | | | | | Merge branch 'topic/pcm-subclass-fix' into for-linusTakashi Iwai2009-06-102-2/+0
| |\ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/pcm-subclass-fix: ALSA: Remove invalid GENERIC_MIX PCM sublass
| | * | | | | | | | | | | | ALSA: Remove invalid GENERIC_MIX PCM sublassTakashi Iwai2009-06-022-2/+0
| | | |_|/ / / / / / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SNDRV_PCM_SUBCLASS_GENERIC_MIX is mostly for h/w multi-stream playback devices, but ca0106 and emu10k1x don't support it (unlike emu10k1). We shouldn't set that flag to avoid confusion. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | | | | | Merge branch 'topic/pcm-jiffies-check' into for-linusTakashi Iwai2009-06-104-22/+84
| |\ \ \ \ \ \ \ \ \ \ \ \ | | | |_|_|_|_|_|_|_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/pcm-jiffies-check: ALSA: pcm - A helper function to compose PCM stream name for debug prints ALSA: pcm - Fix update of runtime->hw_ptr_interrupt ALSA: pcm - Fix a typo in hw_ptr update check ALSA: PCM midlevel: lower jiffies check margin using runtime->delay value ALSA: PCM midlevel: Do not update hw_ptr_jiffies when hw_ptr is not changed ALSA: PCM midlevel: introduce mask for xrun_debug() macro ALSA: PCM midlevel: improve fifo_size handling
| | * | | | | | | | | | | ALSA: pcm - A helper function to compose PCM stream name for debug printsTakashi Iwai2009-06-081-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a common helper function for the PCM stream name displayed in XRUN and buffer-pointer debug prints. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | | | | | ALSA: pcm - Fix update of runtime->hw_ptr_interruptTakashi Iwai2009-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 13f040f9e55d41e92e485389123654971e03b819 made another regression, the missing update of runtime->hw_ptr_interrupt. Since this field is only checked in snd_pcmupdate__hw_ptr_interrupt(), not in snd_pcm_update_hw_ptr(), it must be updated before the hw_ptr change check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud