summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* i2c: axxia: Add I2C driver for AXM55xxAnders Berg2014-10-034-0/+601
| | | | | | | | | Add I2C bus driver for the controller found in the LSI Axxia family SoCs. The driver implements 10-bit addressing and SMBus transfer modes via emulation (including SMBus block data read). Signed-off-by: Anders Berg <anders.berg@avagotech.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: exynos: add support for HSI2C module on Exynos7Naveen Krishna Ch2014-10-033-7/+68
| | | | | | | | | | | | | | The HSI2C module on Exynos7 differs in the transfer status bits. Transfer status bits were moved to INT_ENABLE and INT_STATUS registers This patch adds support for the HSI2C module on Exynos7. 1. Implementes a "hw" field in the variant struct to distinguish the hardware. 2. Updates the dt-new compatible in dt-binding documenation Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mxs: detect No Slave Ack on SELECT in PIO modeJanusz Użycki2014-10-031-0/+3
| | | | | | | | | i2cdetect scanned i2c bus slow because the i2c-mxs driver ignored the NO_SLAVE_ACK bit during busy-waiting loop. Thanks to the patch, the speedup happens. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: cros_ec: Remove EC_I2C_FLAG_10BITDoug Anderson2014-09-302-5/+4
| | | | | | | | | | | | | | | | In <https://lkml.org/lkml/2014/6/10/265> pointed out that the 10-bit flag in the cros_ec_tunnel was useless. It went into a 16-bit flags field but was defined at (1 << 16). Since we have no 10-bit i2c devices on the other side of the tunnel on any known devices this was never a problem. Until we do it makes sense to remove this code. On the EC side the code to handle this flag was removed in <https://chromium-review.googlesource.com/204162>. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: cros-ec-tunnel: Add of match tableSjoerd Simons2014-09-291-0/+9
| | | | | | | | | | | To enable the cros-ec-tunnel driver to be auto-loaded when build as a module add an of match table (and export it) to match the modalias information passed on to userspace as the Cros EC MFD driver registers the MFD subdevices with an of_compatibility string. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: rcar: remove sign-compare flawWolfram Sang2014-09-291-1/+1
| | | | | | | | | | gcc rightfully says: drivers/i2c/busses/i2c-rcar.c:198:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: ismt: Use minimum descriptor sizeFan Du2014-09-291-1/+1
| | | | | | | | | | | | Software is allowed to allocate number of descriptor size from 2 to 256, this i2c controller could process more descriptor, but for i2c core soft ware layer, only one i2c transaction is allowed each time. So here switch to minimum 2 descriptor when initialization. Signed-off-by: Fan Du <fan.du@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: Add arbitration lost checkHaibo Chen2014-09-291-0/+8
| | | | | | | | | | | | | | | | | According to the i.mx spec, for multimaster mode, if I2C is enabled when the bus is busy and asserts start, hardware inhibits the transmission, clears MSTA without signaling a stop, generate an interrupt, and set I2C_I2SR[IAL] to indicate a failed attempt to engage the bus, which means arbitration lost. In this case, we should first test I2C_I2SR[IAL], and clear this bit if it is set, and then I2C controller default to slave receive mode. This patch check the IAL bit every time before an I2c transmission. if IAL is set, clear it and make I2C controller to default mode. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: rk3x: Remove unlikely() annotationsDoug Anderson2014-09-291-2/+2
| | | | | | | | | | | | | | Having a transfer more than 32 bits is not all that unlikely. Remove the annotation. The unlikely in the IRQ handler can't gain us much. It's not in a loop, so at most it would save 1 instruction per IRQ, which isn't much. In fact on the compiler I tested it produced the exact same code. Remove it too. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: rcar: check for no IRQ in rcar_i2c_irq()Sergei Shtylyov2014-09-291-1/+7
| | | | | | | | | Check if the ICMSR register (masked with the ICMIER register) evaluates to 0 in the driver's interrupt handler and return IRQ_NONE in that case, like many other drivers do. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: rcar: make rcar_i2c_prepare_msg() *void*Sergei Shtylyov2014-09-291-7/+2
| | | | | | | | rcar_i2c_prepare_msg() always returns 0, so we can make this function return *void* and thus remove the result check in rcar_i2c_master_xfer(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: rcar: simplify check for last messageSergei Shtylyov2014-09-291-1/+1
| | | | | | | | | rcar_i2c_master_xfer() needlessly compares the message pointers (using indirect addressing) in order to detect the last I2C message, while it's enough to only compare the message indexes. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: add support of platform data to set I2C modeTan, Raymond2014-09-292-0/+27
| | | | | | | | | | | | | Use the platform data to set the clk_freq when there is no DT configuration available. The clk_freq in turn will determine the I2C speed mode. In Quark, there is currently no other configuration mechanism other than board files. Signed-off-by: Raymond Tan <raymond.tan@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: add support of I2C standard modeRomain Baeriswyl2014-09-291-2/+21
| | | | | | | | | | | | | | Some legacy devices support ony I2C standard mode at 100kHz. This patch allows to select the standard mode through the DTS with the use of the existing clock-frequency parameter. When clock-frequency parameter is not set, the fast mode is selected. Only when the parameter is set at 100000, the standard mode is selected. Signed-off-by: Romain Baeriswyl <romainba@abilis.com> Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Linux 3.17-rc7v3.17-rc7Linus Torvalds2014-09-281-1/+1
|
* Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2014-09-281-0/+5
|\ | | | | | | | | | | | | | | | | | | Pull slave-dmaengine fixes from Vinod Koul: "Two small fixes for omap dmaengine driver which fixes cyclic suspend and resume" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: omap-dma: Restore the CLINK_CTRL in resume path dmaengine: omap-dma: Add memory barrier to dma_resume path
| * dmaengine: omap-dma: Restore the CLINK_CTRL in resume pathPeter Ujfalusi2014-09-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | When the audio stream is paused or suspended we stop the sDMA and when it is unpaused/resumed we start the channel without reconfiguring it. The omap_dma_stop() clears the link configuration when we pause the dma, but it is not setting it back on start. This will result only one audio buffer to be played back and the DMA will stop, since the linking is disabled. We need to restore the CLINK_CTRL register in case of resume. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: omap-dma: Add memory barrier to dma_resume pathPeter Ujfalusi2014-09-231-0/+2
| | | | | | | | | | | | | | | | | | Add mb() call to resume path to ensure the necessary barrier. Resume can happen after waking up from suspend for example. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2014-09-278-85/+60
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes + unifying __d_move() and __d_materialise_dentry() + minimal regression fix for d_path() of victims of overwriting rename() ported on top of that" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Don't exchange "short" filenames unconditionally. fold swapping ->d_name.hash into switch_names() fold unlocking the children into dentry_unlock_parents_for_move() kill __d_materialise_dentry() __d_materialise_dentry(): flip the order of arguments __d_move(): fold manipulations with ->d_child/->d_subdirs don't open-code d_rehash() in d_materialise_unique() pull rehashing and unlocking the target dentry into __d_materialise_dentry() ufs: deal with nfsd/iget races fuse: honour max_read and max_write in direct_io mode shmem: fix nlink for rename overwrite directory
| * | vfs: Don't exchange "short" filenames unconditionally.Mikhail Efremov2014-09-271-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only exchange source and destination filenames if flags contain RENAME_EXCHANGE. In case if executable file was running and replaced by other file /proc/PID/exe should still show correct file name, not the old name of the file by which it was replaced. The scenario when this bug manifests itself was like this: * ALT Linux uses rpm and start-stop-daemon; * during a package upgrade rpm creates a temporary file for an executable to rename it upon successful unpacking; * start-stop-daemon is run subsequently and it obtains the (nonexistant) temporary filename via /proc/PID/exe thus failing to identify the running process. Note that "long" filenames (> DNAiME_INLINE_LEN) are still exchanged without RENAME_EXCHANGE and this behaviour exists long enough (should be fixed too apparently). So this patch is just an interim workaround that restores behavior for "short" names as it was before changes introduced by commit da1ce0670c14 ("vfs: add cross-rename"). See https://lkml.org/lkml/2014/9/7/6 for details. AV: the comments about being more careful with ->d_name.hash than with ->d_name.name are from back in 2.3.40s; they became obsolete by 2.3.60s, when we started to unhash the target instead of swapping hash chain positions followed by d_delete() as we used to do when dcache was first introduced. Acked-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: da1ce0670c14 "vfs: add cross-rename" Signed-off-by: Mikhail Efremov <sem@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | fold swapping ->d_name.hash into switch_names()Linus Torvalds2014-09-271-2/+1
| | | | | | | | | | | | | | | | | | | | | and do it along with ->d_name.len there Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | fold unlocking the children into dentry_unlock_parents_for_move()Al Viro2014-09-261-5/+4
| | | | | | | | | | | | | | | | | | | | | ... renaming it into dentry_unlock_for_move() and making it more symmetric with dentry_lock_for_move(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | kill __d_materialise_dentry()Al Viro2014-09-261-44/+10
| | | | | | | | | | | | | | | | | | it folds into __d_move() now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | __d_materialise_dentry(): flip the order of argumentsAl Viro2014-09-261-24/+20
| | | | | | | | | | | | | | | | | | | | | ... thus making it much closer to (now unreachable, BTW) IS_ROOT(dentry) case in __d_move(). A bit more and it'll fold in. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | __d_move(): fold manipulations with ->d_child/->d_subdirsAl Viro2014-09-261-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | list_del() + list_add() is a slightly pessimised list_move() list_del() + INIT_LIST_HEAD() is a slightly pessimised list_del_init() Interleaving those makes the resulting code even worse. And harder to follow... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | don't open-code d_rehash() in d_materialise_unique()Al Viro2014-09-261-5/+1
| | | | | | | | | | | | | | | | | | ... and get rid of duplicate BUG_ON() there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | pull rehashing and unlocking the target dentry into __d_materialise_dentry()Al Viro2014-09-261-7/+4
| | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | ufs: deal with nfsd/iget racesAl Viro2014-09-262-1/+9
| | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | fuse: honour max_read and max_write in direct_io modeMiklos Szeredi2014-09-264-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The third argument of fuse_get_user_pages() "nbytesp" refers to the number of bytes a caller asked to pack into fuse request. This value may be lesser than capacity of fuse request or iov_iter. So fuse_get_user_pages() must ensure that *nbytesp won't grow. Now, when helper iov_iter_get_pages() performs all hard work of extracting pages from iov_iter, it can be done by passing properly calculated "maxsize" to the helper. The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need this capability, so pass LONG_MAX as the maxsize argument here. Fixes: c9c37e2e6378 ("fuse: switch to iov_iter_get_pages()") Reported-by: Werner Baumann <werner.baumann@onlinehome.de> Tested-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | shmem: fix nlink for rename overwrite directoryMiklos Szeredi2014-09-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge branch 'for-3.17-fixes' of ↵Linus Torvalds2014-09-276-24/+43
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "This is quite late but these need to be backported anyway. This is the fix for a long-standing cpuset bug which existed from 2009. cpuset makes use of PF_SPREAD_{PAGE|SLAB} flags to modify the task's memory allocation behavior according to the settings of the cpuset it belongs to; unfortunately, when those flags have to be changed, cpuset did so directly even whlie the target task is running, which is obviously racy as task->flags may be modified by the task itself at any time. This obscure bug manifested as corrupt PF_USED_MATH flag leading to a weird crash. The bug is fixed by moving the flag to task->atomic_flags. The first two are prepatory ones to help defining atomic_flags accessors and the third one is the actual fix" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flags sched: add macros to define bitops for task atomic flags sched: fix confusing PFA_NO_NEW_PRIVS constant
| * | | cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flagsZefan Li2014-09-245-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we change cpuset.memory_spread_{page,slab}, cpuset will flip PF_SPREAD_{PAGE,SLAB} bit of tsk->flags for each task in that cpuset. This should be done using atomic bitops, but currently we don't, which is broken. Tetsuo reported a hard-to-reproduce kernel crash on RHEL6, which happened when one thread tried to clear PF_USED_MATH while at the same time another thread tried to flip PF_SPREAD_PAGE/PF_SPREAD_SLAB. They both operate on the same task. Here's the full report: https://lkml.org/lkml/2014/9/19/230 To fix this, we make PF_SPREAD_PAGE and PF_SPREAD_SLAB atomic flags. v4: - updated mm/slab.c. (Fengguang Wu) - updated Documentation. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: Kees Cook <keescook@chromium.org> Fixes: 950592f7b991 ("cpusets: update tasks' page/slab spread flags in time") Cc: <stable@vger.kernel.org> # 2.6.31+ Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | | sched: add macros to define bitops for task atomic flagsZefan Li2014-09-242-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will simplify code when we add new flags. v3: - Kees pointed out that no_new_privs should never be cleared, so we shouldn't define task_clear_no_new_privs(). we define 3 macros instead of a single one. v2: - updated scripts/tags.sh, suggested by Peter Cc: Ingo Molnar <mingo@kernel.org> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | | sched: fix confusing PFA_NO_NEW_PRIVS constantZefan Li2014-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1d4457f99928 ("sched: move no_new_privs into new atomic flags") defined PFA_NO_NEW_PRIVS as hexadecimal value, but it is confusing because it is used as bit number. Redefine it as decimal bit number. Note this changes the bit position of PFA_NOW_NEW_PRIVS from 1 to 0. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Kees Cook <keescook@chromium.org> [ lizf: slightly modified subject and changelog ] Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2014-09-2713-77/+139
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's our last set of fixes for 3.17. Most of these are for TI platforms, fixing some noisy Kconfig issues, runtime clock and power issues on several platforms and NAND timings on DRA7. There are also a couple of bug fixes for i.MX, one for QCOM and a small fix to avoid section mismatch noise on PXA. Diffstat looks large, partially due to some tables being updated and thus touching many lines. The qcom gsbi change also restructures clock management a bit and thus touches a bunch of lines. All in all, a bit more changes than we'd like at this point, but nothing stands out as risky either so it seems like the right thing to send it up now instead of holding it to the merge window" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers/soc: qcom: do not disable the iface clock in probe ARM: imx: fix .is_enabled() of shared gate clock ARM: OMAP3: Fix I/O chain clock line assertion timed out error ARM: keystone: dts: fix bindings for pcie and usb clock nodes bus: omap_l3_noc: Fix connID for OMAP4 ARM: DT: imx53: fix lvds channel 1 port ARM: dts: cm-t54: fix serial console power supply. ARM: dts: dra7-evm: Fix NAND GPMC timings ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init ARM: OMAP: Fix Kconfig warning for omap1
| * | | | drivers/soc: qcom: do not disable the iface clock in probeSrinivas Kandagatla2014-09-231-13/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | since commit 31964ffebbb9 ("tty: serial: msm: Remove direct access to GSBI")' serial hangs if earlyprintk are enabled. This hang is noticed only when the GSBI driver is probed and all the earlyprintks before gsbi probe are seen on the console. The reason why it hangs is because GSBI driver disables hclk in its probe function without realizing that the serial IP might be in use by a bootconsole. As gsbi driver disables the clock in probe the bootconsole locks up. Turning off hclk's could be dangerous if there are system components like earlyprintk using the hclk. This patch fixes the issue by delegating the clock management to probe and remove functions in gsbi rather than disabling the clock in probe. More detailed problem description can be found here: http://www.spinics.net/lists/linux-arm-msm/msg10589.html Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | Merge tag 'fix-v3.17-io-chain-v3' of ↵Olof Johansson2014-09-222-5/+36
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Regression fix for early omap3 revisions for wake-up events that too some time to narrow down. Although a bit intrusive, this would be good to get into the -rc cycle as there are quite a few boards out there with omap3 es2.1 and es3.0, and we have those in at least three boot test systems too that show errors without this patch. * tag 'fix-v3.17-io-chain-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: Fix I/O chain clock line assertion timed out error Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: OMAP3: Fix I/O chain clock line assertion timed out errorTony Lindgren2014-09-162-5/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are getting "PRM: I/O chain clock line assertion timed out" errors on early omaps for device tree based booting. This is because we are unconditionally calling reconfigure_io_chain while legacy booting has omap3_has_io_chain_ctrl() checks in place in omap_hwmod.c. For device tree based booting, we are calling reconfigure_io_chain unconditionally from pinctrl framework. So we need to add a check for omap3_has_io_chain_ctrl() to avoid the errors for trying to access a register that does not exist. For es3.0, the documentation in "4.11.2 Device Off-Mode Configuration" just mentions PM_WKEN_WKUP[8] bit. For es3.1, there's a new chapter in documentation for "4.11.2.2 I/O Wake-Up Mechanism" that describes the PM_WKEN_WKUP[16] ST_IO_CHAIN bit. So PM_WKEN_WKUP[16] bit did not get added until in es3.1 probaly to fix issues with flakey wake-up events. We are doing proper checks for ST_IO_CHAIN already in id.c and with omap3_has_io_chain_ctrl(). For more information, see also commit b02b917211d5 ("ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection"). Let's fix the issue by selecting the right function during init for reconfigure_io_chain depending on the omap revision. For es3.0 and earlier we need to just toggle EN_IO. By doing this, we can move the check for omap3_has_io_chain_ctrl() from omap_hwmod.c to the init code in prm_3xxx.c. And then we can unconditionally call reconfigure_io_chain. Thanks to Paul Walmsley and Nishanth Menon for help with debugging the issue. Fixes: 30a69ef785e8 ("ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap") Cc: Kevin Hilman <khilman@kernel.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | Merge tag 'fixes-v3.17-rc4' of ↵Olof Johansson2014-09-223-43/+39
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Few regression fixes for omaps for the -rc cycle: - Fix for omap_l3_noc bus code - Serial console fix for cm-t53 - NAND timings fix for dra7-evm * tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: omap_l3_noc: Fix connID for OMAP4 ARM: dts: cm-t54: fix serial console power supply. ARM: dts: dra7-evm: Fix NAND GPMC timings Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | bus: omap_l3_noc: Fix connID for OMAP4Nishanth Menon2014-09-111-25/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d4d8819e205854c ("bus: omap_l3_noc: fix masterid detection") did the right thing in dropping the LSB 2 bits which is not part of the ConnID for NTTP master address. However, as part of that change, we should also have ensured that existing list of OMAP4 connID codes are also shifted by 2 bits to ensure that connIDs map to "Table 13-18. ConnID Values" as provided in Technical Reference Manuals for OMAP4430(Rev AP, April 2014, SWPU220AP) and OMAP4460(Rev AB, April 2014, SWPU234AB) Fixes: d4d8819e205854c ("bus: omap_l3_noc: fix masterid detection") Reported-by: Kristian Otnes <kotnes@cisco.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: dts: cm-t54: fix serial console power supply.Dmitry Lifshitz2014-09-101-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LDO8 regulator is used for act led and serial cosole power supply. Its DT status is declared as "disabled", however the serial console was functional until Commit 318dbb02b ("regulator: palmas: Fix SMPS enable/disable/is_enabled") wich properly turns off LDO8 on boot. Fix serial cosole power supply (and act led) on boot by turning LDO8 on. Fixes: 318dbb02b ("regulator: palmas: Fix SMPS enable/disable/is_enabled") Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Tested-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: dts: dra7-evm: Fix NAND GPMC timingsRoger Quadros2014-09-101-15/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nand timings were scaled down by 2 to account for the 2x rate returned by clk_get_rate(gpmc_fclk). As the clock data got fixed by [1], revert back to actual timings (i.e. scale them up by 2). Without this NAND doesn't work on dra7-evm. [1] - commit dd94324b983afe114ba9e7ee3649313b451f63ce ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Fixes: ff66a3c86e00 ("ARM: dts: dra7: add support for parallel NAND flash") Cc: <stable@vger.kernel.org> [3.16] Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | | Merge tag 'fixes-v3.17-rc4' of ↵Olof Johansson2014-09-221-3/+3
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes Keystone Edision dts fix for -rc cycle. Fix the PCIE and USB nodes. * tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: keystone: dts: fix bindings for pcie and usb clock nodes Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | | ARM: keystone: dts: fix bindings for pcie and usb clock nodesMurali Karicheri2014-09-111-3/+3
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix incorrect clock names for usb1, pcie1 and domain register offset for pcie1 clock nodes on K2E EVM Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| * | | | | | ARM: imx: fix .is_enabled() of shared gate clockShawn Guo2014-09-221-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 63288b721a80 ("ARM: imx: fix shared gate clock") attempted to fix an issue with particular enable/disable sequence from two shared gate clocks. But unfortunately, while it partially fixed the issue, it also did something wrong in .is_enabled() function hook. In case of shared gate, the function shouldn't really query the hardware state via share_count, because the function is trying to query the enabling state of the clock in question, not the hardware state which is shared by multiple clocks. Fix the issue by returning the enable_count of the clock itself which is maintained by clock core, in case it's a clock sharing hardware gate with others. As the result, the initialization of share_count per hardware state is not needed now. So remove it. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Fixes: 63288b721a80 ("ARM: imx: fix shared gate clock") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | ARM: DT: imx53: fix lvds channel 1 portMarkus Niebel2014-09-112-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | using LVDS channel 1 on an i.MX53 leads to following error: imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1 This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for reparenting di1 clock to ldb_di1. The value of the mux param comes from device tree port settings. On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations, only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1], respectively) Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Fixes: e05c8c9a790a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi") Cc: <stable@vger.kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | ARM: pxa: fix section mismatch warning for pxa_timer_nodt_initArnd Bergmann2014-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a38b1f60b5245a3 ("ARM: pxa: Add non device-tree timer link to clocksource") introduced a harmless section mismatch warning for all pxa platforms, by introducing a new pxa_timer_init() function that is not marked __init but that calls pxa_timer_nodt_init(), which is. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
| * | | | | | ARM: OMAP: Fix Kconfig warning for omap1Tony Lindgren2014-09-092-3/+3
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 21278aeafbfa ("ARM: use menuconfig for sub-arch menus") improved the sub-arch menus, but accidentally caused new warnings for omap1. This was because the commit added a menu entry around config ARCH_OMAP bool entry where the menu had depends on ARCH_MULTI_V6 || ARCH_MULTI_V7. As ARCH_OMAP is shared between omap1 and omap2plus, let's fix the issue by defining ARCH_OMAP in the shared plat-omap/Kconfig. Fixes: 21278aeafbfa ("ARM: use menuconfig for sub-arch menus") Reported-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | | | | | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2014-09-272-3/+15
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS fixes from Ralf Baechle: "The final round of fixes. One corner case in the math emulator and another one in the mcount function for ftrace" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mcount: Adjust stack pointer for static trace in MIPS32 MIPS: Fix MFC1 & MFHC1 emulation for 64-bit MIPS systems
| * | | | | | MIPS: mcount: Adjust stack pointer for static trace in MIPS32Markos Chandras2014-09-261-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401c797 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud