summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipsec: Remove useless ret variableHerbert Xu2008-12-261-3/+1
| | | | | | | | This patch removes a useless ret variable from the IPv4 ESP/UDP decapsulation code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Eliminate the need for forward referencesAnton Vorontsov2008-12-261-42/+39
| | | | | | | | | This patch simply reorders some functions to eliminate the need for forward references. No other changes than that. Suggested-by: Timur Tabi <timur@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: Driver for Solos PCI ADSL2+ card.David Woodhouse2008-12-263-0/+797
| | | | | | | | | | This adds basic support for the 'Solos' PCI ADSL2+ cards being developed by Traverse Technologies and Xrio Ltd: http://www.traverse.com.au/productview.php?product_id=116 Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: ifdef cleanupTilman Schmidt2008-12-264-82/+6
| | | | | | | Remove unnecessary #ifdef-s and #if-0-ed code sections. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: use pr_err() and pr_info()Tilman Schmidt2008-12-268-58/+51
| | | | | | | | | Switch from private printk wrapper macros to using pr_err() and pr_info() from linux/kernel.h, at the same time unifying a few error messages. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: add control to access embedded imagesDivy Le Ray2008-12-262-0/+19
| | | | | | | | Update contol path between cxgb3 and ULP modules (iWARP, iSCSI) to provide access to firware and protocol engine info. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wireless/prism54: fix sparse warnings: make symbols staticHannes Eder2008-12-261-4/+4
| | | | | | | | | | | | Fix this sparse warnings: drivers/net/wireless/prism54/islpci_hotplug.c:97:1: warning: symbol 'prism54_probe' was not declared. Should it be static? drivers/net/wireless/prism54/islpci_hotplug.c:220:1: warning: symbol 'prism54_remove' was not declared. Should it be static? drivers/net/wireless/prism54/islpci_hotplug.c:263:1: warning: symbol 'prism54_suspend' was not declared. Should it be static? drivers/net/wireless/prism54/islpci_hotplug.c:286:1: warning: symbol 'prism54_resume' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wireless/ipw2x00: fix sparse warnings: make symbols staticHannes Eder2008-12-261-3/+3
| | | | | | | | | | | Fix this sparse warnings: drivers/net/wireless/ipw2x00/ipw2100.c:5271:6: warning: symbol 'ipw2100_queues_initialize' was not declared. Should it be static? drivers/net/wireless/ipw2x00/ipw2100.c:5278:6: warning: symbol 'ipw2100_queues_free' was not declared. Should it be static? drivers/net/wireless/ipw2x00/ipw2100.c:5285:5: warning: symbol 'ipw2100_queues_allocate' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wireless/b43: fix sparse warnings: make symbols staticHannes Eder2008-12-262-12/+12
| | | | | | | | | | | | | | | | | | Fix this sparse warnings: drivers/net/wireless/b43/phy_a.c:80:6: warning: symbol 'b43_radio_set_tx_iq' was not declared. Should it be static? drivers/net/wireless/b43/phy_a.c:150:6: warning: symbol 'b43_radio_init2060' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:57:10: warning: symbol 'b43_radio_channel_codes_bg' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:218:6: warning: symbol 'b43_set_txpower_g' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:386:6: warning: symbol 'b43_nrssi_hw_write' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:393:5: warning: symbol 'b43_nrssi_hw_read' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:404:6: warning: symbol 'b43_nrssi_hw_update' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:418:6: warning: symbol 'b43_nrssi_mem_update' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:592:6: warning: symbol 'b43_calc_nrssi_slope' was not declared. Should it be static? drivers/net/wireless/b43/phy_g.c:1357:5: warning: symbol 'b43_radio_init2050' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wireless/ath9k: fix sparse warnings: make symbols staticHannes Eder2008-12-261-30/+32
| | | | | | | | | | | | | | | | | | | | Fix this sparse warnings: drivers/net/wireless/ath9k/eeprom.c:195:6: warning: symbol 'ath9k_fill_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:463:5: warning: symbol 'ath9k_check_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1219:6: warning: symbol 'ath9k_hw_set_def_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1510:6: warning: symbol 'ath9k_hw_set_4k_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2007:5: warning: symbol 'ath9k_set_txpower' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2106:6: warning: symbol 'ath9k_set_addac' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2543:6: warning: symbol 'ath9k_eeprom_set_board_values' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2606:5: warning: symbol 'ath9k_get_eeprom_antenna_cfg' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2622:4: warning: symbol 'ath9k_hw_get_4k_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2628:4: warning: symbol 'ath9k_hw_get_def_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2647:4: warning: symbol 'ath9k_get_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2790:5: warning: symbol 'ath9k_get_eeprom' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wireless: fix sparse warnings: make symbols staticHannes Eder2008-12-263-3/+3
| | | | | | | | | | | Fix this sparse warnings: drivers/net/wireless/airo.c:3610:6: warning: symbol 'mpi_receive_802_11' was not declared. Should it be static? drivers/net/wireless/atmel.c:3183:6: warning: symbol 'atmel_join_bss' was not declared. Should it be static? drivers/net/wireless/ray_cs.c:831:5: warning: symbol 'ray_dev_init' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wan/z85230.c: fix sparse warnings: un-EXPORT symbolsHannes Eder2008-12-261-8/+2
| | | | | | | | | | | | | The symbols are only references within the translation unit they are defined in, so un-EXPORT them und make them 'static'. Fix this sparse warnings: drivers/net/wan/z85230.c:604:25: warning: symbol 'z8530_dma_sync' was not declared. Should it be static? drivers/net/wan/z85230.c:613:25: warning: symbol 'z8530_txdma_sync' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wan: fix sparse warning: make symbol staticHannes Eder2008-12-261-1/+1
| | | | | | | | | Fix this sparse warning: drivers/net/wan/x25_asy.c:623:5: warning: symbol 'x25_asy_esc' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wan: fix sparse warnings: make do-while a compound statementHannes Eder2008-12-261-4/+4
| | | | | | | | | | Fix this sparse warnings: drivers/net/wan/wanxl.c:414:3: warning: do-while statement is not a compound statement drivers/net/wan/wanxl.c:441:3: warning: do-while statement is not a compound statement Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/tulip: fix sparse warnings: make do-while a compound statementHannes Eder2008-12-262-4/+4
| | | | | | | | | | Fix this sparse warnings: drivers/net/tulip/de2104x.c:1695:4: warning: do-while statement is not a compound statement drivers/net/tulip/tulip_core.c:1433:5: warning: do-while statement is not a compound statement Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/tokenring: fix sparse warnings: make symbols staticHannes Eder2008-12-264-5/+5
| | | | | | | | | | | | Fix this sparse warnings: drivers/net/tokenring/ibmtr.c:1840:6: warning: symbol 'tok_rerun' was not declared. Should it be static? drivers/net/tokenring/madgemc.c:469:16: warning: symbol 'madgemc_setnselout_pins' was not declared. Should it be static? drivers/net/tokenring/proteon.c:286:16: warning: symbol 'proteon_setnselout_pins' was not declared. Should it be static? drivers/net/tokenring/skisa.c:303:16: warning: symbol 'sk_isa_setnselout_pins' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/skfp: fix sparse warnings: make symbols staticHannes Eder2008-12-261-3/+3
| | | | | | | | | | | Fix this sparse warnings: drivers/net/skfp/skfddi.c:620:13: warning: symbol 'skfp_interrupt' was not declared. Should it be static? drivers/net/skfp/skfddi.c:687:25: warning: symbol 'skfp_ctl_get_stats' was not declared. Should it be static? drivers/net/skfp/skfddi.c:1232:6: warning: symbol 'CheckSourceAddress' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/qlge: fix sparse warnings: make symbols staticHannes Eder2008-12-262-2/+2
| | | | | | | | | | Fix this sparse warnings: drivers/net/qlge/qlge_ethtool.c:100:6: warning: symbol 'ql_update_stats' was not declared. Should it be static? drivers/net/qlge/qlge_mpi.c:22:5: warning: symbol 'ql_get_mb_sts' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/netxen: fix sparse warnings: use NULL pointer instead of plain ↵Hannes Eder2008-12-261-2/+2
| | | | | | | | | | | | integer Fix this sparse warnings: drivers/net/netxen/netxen_nic_hw.c:1462:18: warning: Using plain integer as NULL pointer drivers/net/netxen/netxen_nic_hw.c:1536:18: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ixgbe: fix sparse warnings: make symbols staticHannes Eder2008-12-262-14/+14
| | | | | | | | | | | | | | | | | Fix this sparse warnings: drivers/net/ixgbe/ixgbe_82598.c:180:5: warning: symbol 'ixgbe_get_copper_link_capabilities_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:245:5: warning: symbol 'ixgbe_setup_fc_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:729:5: warning: symbol 'ixgbe_set_vmdq_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:773:5: warning: symbol 'ixgbe_set_vfta_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:897:5: warning: symbol 'ixgbe_read_analog_reg8_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:919:5: warning: symbol 'ixgbe_write_analog_reg8_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:940:5: warning: symbol 'ixgbe_read_i2c_eeprom_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_82598.c:1000:5: warning: symbol 'ixgbe_get_supported_physical_layer_82598' was not declared. Should it be static? drivers/net/ixgbe/ixgbe_dcb_82598.c:100:5: warning: symbol 'ixgbe_dcb_config_packet_buffers_82598' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/irda: fix sparse warnings: make symbols staticHannes Eder2008-12-263-11/+11
| | | | | | | | | | | | | | | | | | Fix this sparse warnings: drivers/net/irda/ma600-sir.c:239:5: warning: symbol 'ma600_reset' was not declared. Should it be static? drivers/net/irda/smsc-ircc2.c:875:5: warning: symbol 'smsc_ircc_hard_xmit_sir' was not declared. Should it be static? drivers/net/irda/smsc-ircc2.c:1131:6: warning: symbol 'smsc_ircc_set_sir_speed' was not declared. Should it be static? drivers/net/irda/smsc-ircc2.c:1897:6: warning: symbol 'smsc_ircc_sir_start' was not declared. Should it be static? drivers/net/irda/w83977af_ir.c:150:5: warning: symbol 'w83977af_open' was not declared. Should it be static? drivers/net/irda/w83977af_ir.c:313:5: warning: symbol 'w83977af_probe' was not declared. Should it be static? drivers/net/irda/w83977af_ir.c:412:6: warning: symbol 'w83977af_change_speed' was not declared. Should it be static? drivers/net/irda/w83977af_ir.c:492:5: warning: symbol 'w83977af_hard_xmit' was not declared. Should it be static? drivers/net/irda/w83977af_ir.c:734:5: warning: symbol 'w83977af_dma_receive' was not declared. Should it be static? drivers/net/irda/w83977af_ir.c:806:5: warning: symbol 'w83977af_dma_receive_complete' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/igb: remove dead code (function 'igb_read_pci_cfg')Hannes Eder2008-12-261-7/+0
| | | | | | | | | | Fix this warning: drivers/net/igb/e1000_mac.c:54: warning: 'igb_read_pci_cfg' defined but not used Signed-off-by: Hannes Eder <hannes@hanneseder.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/enic: fix sparse warning: make symbol staticHannes Eder2008-12-261-1/+1
| | | | | | | | | Fix this sparse warning: drivers/net/enic/vnic_dev.c:288:5: warning: symbol 'vnic_dev_capable' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/e1000e: fix sparse warnings: make symbols staticHannes Eder2008-12-261-2/+4
| | | | | | | | | | Fix this sparse warnings: drivers/net/e1000e/es2lan.c:1265:5: warning: symbol 'e1000_read_kmrn_reg_80003es2lan' was not declared. Should it be static? drivers/net/e1000e/es2lan.c:1298:5: warning: symbol 'e1000_write_kmrn_reg_80003es2lan' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/cxgb3: comment out dead codeHannes Eder2008-12-251-0/+2
| | | | | | | | | | | | | | The function 'vsc8211_set_speed_duplex' is not used, so comment it out. For 'vsc8211_set_automdi' the function 'vsc8211_set_speed_duplex' is the only caller, so comment it out as well. Fix this (sparse) warning: drivers/net/cxgb3/vsc8211.c:269: warning: 'vsc8211_set_automdi' defined but not used drivers/net/cxgb3/vsc8211.c:295:5: warning: symbol 'vsc8211_set_speed_duplex' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/bonding: fix sparse warnings: move decls to header fileHannes Eder2008-12-253-4/+5
| | | | | | | | | | | Fix this sparse warnings: drivers/net/bonding/bond_main.c:104:20: warning: symbol 'bonding_defaults' was not declared. Should it be static? drivers/net/bonding/bond_main.c:204:22: warning: symbol 'ad_select_tbl' was not declared. Should it be static? drivers/net/bonding/bond_sysfs.c:60:21: warning: symbol 'bonding_rwsem' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/atlx: fix sparse warnings: make symbols staticHannes Eder2008-12-251-2/+2
| | | | | | | | | | Fix this sparse warnings: drivers/net/atlx/atl1.c:198:16: warning: symbol 'atl1_check_options' was not declared. Should it be static? drivers/net/atlx/atl1.c:526:5: warning: symbol 'atl1_read_mac_addr' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/arcnet: fix sparse warnings: make symbols staticHannes Eder2008-12-252-2/+2
| | | | | | | | | | Fix this sparse warnings: drivers/net/arcnet/capmode.c:64:6: warning: symbol 'arcnet_cap_init' was not declared. Should it be static? drivers/net/arcnet/com90xx.c:586:5: warning: symbol 'com90xx_reset' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fix sparse warnings: make symbols staticHannes Eder2008-12-256-7/+7
| | | | | | | | | | | | | | Fix this sparse warnings: drivers/net/3c523.c:350:6: warning: symbol 'alloc586' was not declared. Should it be static? drivers/net/cs89x0.c:1029:14: warning: symbol 'reset_chip' was not declared. Should it be static? drivers/net/eepro.c:1399:1: warning: symbol 'read_eeprom' was not declared. Should it be static? drivers/net/plip.c:1020:5: warning: symbol 'plip_hard_header_cache' was not declared. Should it be static? drivers/net/s2io.c:5116:6: warning: symbol 'do_s2io_store_unicast_mc' was not declared. Should it be static? drivers/net/smc9194.c:767:12: warning: symbol 'smc_findirq' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fix sparse warning: returning void-valued expressionHannes Eder2008-12-251-1/+1
| | | | | | | | | Fix this sparse warning: drivers/net/niu.c:8850:2: warning: returning void-valued expression Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fix sparse warnings: make do-while a compound statementHannes Eder2008-12-253-19/+20
| | | | | | | | | | | | | | | | | | | While at it insert some extra curly braces and fix formatting. Fix this sparse warnings: drivers/net/atp.c:811:8: warning: do-while statement is not a compound statement drivers/net/atp.c:813:8: warning: do-while statement is not a compound statement drivers/net/atp.c:815:11: warning: do-while statement is not a compound statement drivers/net/atp.c:817:11: warning: do-while statement is not a compound statement drivers/net/plip.c:642:4: warning: do-while statement is not a compound statement drivers/net/plip.c:647:4: warning: do-while statement is not a compound statement drivers/net/plip.c:820:4: warning: do-while statement is not a compound statement drivers/net/plip.c:825:4: warning: do-while statement is not a compound statement drivers/net/starfire.c:886:3: warning: do-while statement is not a compound statement Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: fix sparse warning: use ANSI-style function declarationHannes Eder2008-12-251-1/+1
| | | | | | | | | Fix this sparse warning: drivers/net/ne.c:932:24: warning: non-ANSI function declaration of function 'init_module' Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ehea: use get_zeroed_page for alignment-sensitive allocationNathan Lynch2008-12-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With slub debug enabled, I see the following errors and crash with 2.6.28-rc9: IBM eHEA ethernet device driver (Release EHEA_0095) ehea: Error in ehea_h_register_rpage_mr: not on pageboundary ehea: Error in ehea_reg_mr_section: register_rpage_mr failed ehea: Error in ehea_reg_kernel_mr: registering mr failed ehea: Error in ehea_setup_ports: creating MR failed ehea 23c00100.lhea: setup_ports failed Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6bbdcb Faulting instruction address: 0xd000000000064a24 cpu 0x0: Vector: 300 (Data Access) at [c0000000740e7190] pc: d000000000064a24: .ehea_update_firmware_handles+0x84/0x47c [ehea] lr: d00000000006df34: .ehea_probe_adapter+0x35c/0x39c [ehea] sp: c0000000740e7410 msr: 8000000000009032 dar: 6b6b6b6b6b6bbdcb dsisr: 40000000 current = 0xc000000074233780 paca = 0xc0000000008a3300 pid = 2046, comm = modprobe enter ? for help [c0000000740e74f0] d00000000006df34 .ehea_probe_adapter+0x35c/0x39c [ehea] [c0000000740e75a0] c00000000041d5a4 .of_platform_device_probe+0x78/0xb0 [c0000000740e7630] c0000000002d8b38 .driver_probe_device+0x13c/0x200 [c0000000740e76c0] c0000000002d8c90 .__driver_attach+0x94/0xd8 [c0000000740e7750] c0000000002d7d64 .bus_for_each_dev+0x80/0xd8 [c0000000740e7800] c0000000002d889c .driver_attach+0x28/0x40 [c0000000740e7880] c0000000002d8340 .bus_add_driver+0xd4/0x284 [c0000000740e7920] c0000000002d90a0 .driver_register+0xc4/0x198 [c0000000740e79d0] c00000000041d45c .of_register_driver+0x4c/0x60 [c0000000740e7a50] c000000000020ef8 .ibmebus_register_driver+0x30/0x4c [c0000000740e7ae0] d00000000006e108 .ehea_module_init+0x194/0x208c [ehea] [c0000000740e7b90] c000000000009028 .do_one_initcall+0x90/0x1ac [c0000000740e7d90] c00000000008619c .sys_init_module+0xc4/0x200 [c0000000740e7e30] c0000000000084ac syscall_exit+0x0/0x40 (When slub debug is disabled it works fine.) PAGE_SIZE allocations via slab are not guaranteed to be page-aligned; use get_zeroed_page for the 'pt' buffer (I don't really know what this is, only that it is passed to firmware and that the first error message complains about its alignment). This allows the system to boot. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Remove pauses module parameters.Yevgeny Petrilin2008-12-251-8/+2
| | | | | | | They are controlled through Ethtool interface. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Removed Interrupt moderation module parametersYevgeny Petrilin2008-12-253-24/+3
| | | | | | | | They are controlled through Ethtool interface, no need to have two ways to modify them. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Removed redundant cq->armed flagYevgeny Petrilin2008-12-253-5/+2
| | | | | Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Removed TX locking when polling TX cqYevgeny Petrilin2008-12-251-11/+13
| | | | | | | | | | | There is no need to synchronize the polling with the transmit function. The only place to synchronize is when we process the cq from the transmit function. Also removed spin_lock_irq, and using spin_trylock, if somebody else is already processing the cq, no need to wait for it to finish. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlx4_en: Memory leak on completion queue freeYevgeny Petrilin2008-12-251-1/+2
| | | | | | | | If port is being destroyed without being activated before, CQ resources are not freed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-david' of ↵David S. Miller2008-12-259-184/+1585
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
| * Convert ixp4xx_eth driver to use net_device_ops.Krzysztof Hałasa2008-12-221-5/+10
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * drivers/net/wan: Remove redundant testJulia Lawall2008-12-221-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arg is checked not to be NULL a few lines before. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * HDLC_PPP: Fix Configure-Ack to return original options as required by the ↵Krzysztof Hałasa2008-12-221-5/+6
| | | | | | | | | | | | standard. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * IXP4xx: move common debugging from network drivers to QMGR module.Krzysztof Hałasa2008-12-224-100/+85
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * Update MAINTAINERS entries for IXP4xx and WAN network drivers.Krzysztof Hałasa2008-12-221-1/+6
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * WAN: Add IXP4xx HSS HDLC driver.Krzysztof Hałasa2008-12-223-0/+1365
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * IXP4xx: Add ethtool support to Ethernet driver.Krzysztof Hałasa2008-12-221-0/+45
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * IXP4xx: Add PHYLIB MII ioctl to the Ethernet driver.Krzysztof Hałasa2008-12-221-1/+3
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * IXP4xx: Add PHYLIB support to Ethernet driver.Krzysztof Hałasa2008-12-222-100/+96
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * IXP4xx: Make the Ethernet driver use built-in netdev stats.Krzysztof Hałasa2008-12-221-16/+8
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
| * IXP4xx: Silence section mismatch warning in Ethernet driver.Krzysztof Hałasa2008-12-221-3/+3
| | | | | | | | Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
OpenPOWER on IntegriCloud