summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (nct7802) Add auto_point attributesConstantine Shulyupin2015-08-092-6/+127
| | | | | | | | | Introduced REG_PWM, pwm[1..3]_auto_point[1..5]_temp, pwm[1..3]_auto_point[1..5]_pwm, nct7802_auto_point_attrs, nct7802_auto_point_group, updated nct7802_regmap_is_volatile Signed-off-by: Constantine Shulyupin <const@MakeLinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm70) add device tree supportRabin Vincent2015-08-092-1/+54
| | | | | | | Allow the lm70 to be probed from a device tree. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ltc2978) LTM4676 supports CLEAR_PEAKSGuenter Roeck2015-08-091-1/+1
| | | | | | | Use the CLEAR_PEAKS command on LTM4676. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (adm1275) Add support for ADM1293 and ADM1294Guenter Roeck2015-08-093-27/+158
| | | | | | | | ADM1293 and ADM1294 are mostly compatible with other chips of the same series, but have more configuration options. There are also some differences in register details. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add support for lowest power value attributesGuenter Roeck2015-08-092-24/+34
| | | | | | Add support for powerX_input_lowest for both input and output power. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (adm1275) Introduce new feature flagsGuenter Roeck2015-08-091-43/+54
| | | | | | | | | | Introduce have_vout, have_vaux_status, have_pin_max, and have_uc_fault to simplify adding support for new chips. Also simplify error returns where appropriate to return immediately on error. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (adm1275) Introduce configuration data structure for coeffcientsGuenter Roeck2015-08-091-45/+68
| | | | | | | | Each new chip supported by the driver has a new set of coefficients, making hard-coding coefficients more and more cumbersome. Introduce a datastructure and table to simplify configuration. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (adm1275) Use BIT macroGuenter Roeck2015-08-091-9/+10
| | | | | | Use BIT macro to simplify adding new bit masks. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus_core) Constify pmbus_regulator_opsAxel Lin2015-08-092-2/+2
| | | | | | | pmbus_regulator_ops is not modified after initialized, so make it const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Explicitly set regulator type for pmbus_regulator_opsAxel Lin2015-08-091-0/+1
| | | | | | | | The pmbus_regulator_ops is for voltage regulators, so explicitly set regulator type for better readability. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (g762) Drop owner assignment from struct i2c_driverKrzysztof Kozlowski2015-08-091-1/+0
| | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (f71882fg) Add support for f81768dGeorge Joseph2015-08-091-16/+29
| | | | | | | | | Add f81768d (id 0x1210) currently found on Jetway motherboards. It has 11 voltages but otherwise needed no special handling in this driver. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7802) Add pwmX_enable attributeConstantine Shulyupin2015-08-091-0/+48
| | | | | | | | Introduced REG_SMARTFAN_EN, SMARTFAN_EN_SHIFT, pwmX_enable, show_pwm_enable, store_pwm_enable. Signed-off-by: Constantine Shulyupin <const@MakeLinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon:(f71882fg) Fix f81866a voltage protectionPeter Hung2015-08-091-9/+41
| | | | | | | | | | | The f81866a voltage-1 protector(VIN1) address is differ from f71882. f71882 status:12H, beep:13H, v-high:32H f81866a status:16H, beep:17H, v-high:3aH Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (f71882fg) Fix f81866a temp/beep settingPeter Hung2015-08-091-8/+52
| | | | | | | | | | | | | | | | | The temperature value of Fintek F81866 is the same with f71882fg. It located with 0x6c + 2*(nr), others located with 0x6c + 2*(nr+1). We change the rule in f71882fg_probe(), If type = f71858fg/f8000/f81866a. the temp_start will set to 0, others are 1. The F81866 over-temperature beep setting is not the same with f71882fg too. They are using the same address 63H, but F81866 is using bit 0/1/2 & 4/5/6, others are using bit 1/2/3 & 5/6/7, So we copy from fxxxx_temp_beep_attr[] to f81866_temp_beep_attr and change bit setting. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (f71882fg) Add support for F81866 and F71868Peter Hung2015-08-091-15/+38
| | | | | | | | | | | Add New Fintek SuperIO F81866(0x1010) & F71868(0x1106) with H/W Monitor functions. We increased F71882FG_MAX_INS from 9 to 10 to read F71868 10 voltage sets. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7802) Add pwm mode attributesConstantine Shulyupin2015-08-091-0/+26
| | | | | | Introduced: show_pwm_mode, pwm1_mode, pwm2_mode, pwm2_mode Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7802) Add pwm controlConstantine Shulyupin2015-08-091-0/+47
| | | | | | | | | Added fan output control registers. Modes of operation are PWM (default) and DC. Introduced show_pwm, store_pwm, nct7802_pwm_attrs, nct7802_pwm_group. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct7802) add temperature sensor type attributeConstantine Shulyupin2015-08-091-12/+60
| | | | | | | | | | | | | | Sensor type: 3 diode (current mode), MD=1 4 thermistor, MD=2 Reference: Nuvoton Hardware Monitoring IC NCT7802Y 7.2.32 Mode Selection Register Location : Index 22h Signed-off-by: Constantine Shulyupin <const@MakeLinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Linux 4.2-rc6v4.2-rc6Linus Torvalds2015-08-091-1/+1
|
* Merge branch 'for-linus' of ↵Linus Torvalds2015-08-097-8/+35
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just small ALPS and Elan touchpads, and other driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add special check for fw_version 0x470f01 touchpad Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning Input: alps - only Dell laptops have separate button bits for v2 dualpoint sticks Input: axp20x-pek - add module alias Input: turbografx - fix potential out of bound access
| * Input: elantech - add special check for fw_version 0x470f01 touchpadDuson Lin2015-08-072-2/+21
| | | | | | | | | | | | | | | | | | It is no need to check the packet[0] for sanity check when doing elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. Signed-off by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: twl4030-vibra - fix ERROR: Bad of_node_put() warningMarek Belisko2015-08-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following: [ 8.862274] ERROR: Bad of_node_put() on /ocp/i2c@48070000/twl@48/audio [ 8.869293] CPU: 0 PID: 1003 Comm: modprobe Not tainted 4.2.0-rc2-letux+ #1175 [ 8.876922] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 8.883514] [<c00159e0>] (unwind_backtrace) from [<c0012488>] (show_stack+0x10/0x14) [ 8.891693] [<c0012488>] (show_stack) from [<c05cb810>] (dump_stack+0x78/0x94) [ 8.899322] [<c05cb810>] (dump_stack) from [<c02cfd5c>] (kobject_release+0x68/0x7c) [ 8.907409] [<c02cfd5c>] (kobject_release) from [<bf0040c4>] (twl4030_vibra_probe+0x74/0x188 [twl4030_vibra]) [ 8.917877] [<bf0040c4>] (twl4030_vibra_probe [twl4030_vibra]) from [<c03816ac>] (platform_drv_probe+0x48/0x90) [ 8.928497] [<c03816ac>] (platform_drv_probe) from [<c037feb4>] (really_probe+0xd4/0x238) [ 8.937103] [<c037feb4>] (really_probe) from [<c0380160>] (driver_probe_device+0x30/0x48) [ 8.945678] [<c0380160>] (driver_probe_device) from [<c03801e0>] (__driver_attach+0x68/0x8c) [ 8.954589] [<c03801e0>] (__driver_attach) from [<c037ea60>] (bus_for_each_dev+0x50/0x84) [ 8.963226] [<c037ea60>] (bus_for_each_dev) from [<c037f828>] (bus_add_driver+0xcc/0x1e4) [ 8.971832] [<c037f828>] (bus_add_driver) from [<c0380b60>] (driver_register+0x9c/0xe0) [ 8.980255] [<c0380b60>] (driver_register) from [<c00097e0>] (do_one_initcall+0x100/0x1b8) [ 8.988983] [<c00097e0>] (do_one_initcall) from [<c00b8008>] (do_init_module+0x58/0x1c0) [ 8.997497] [<c00b8008>] (do_init_module) from [<c00b8cac>] (SyS_init_module+0x54/0x64) [ 9.005950] [<c00b8cac>] (SyS_init_module) from [<c000ed20>] (ret_fast_syscall+0x0/0x54) [ 9.015838] input: twl4030:vibrator as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:audio/input/input2 node passed to of_find_node_by_name is put inside that function and new node is returned if found. Free returned node not already freed node. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: alps - only Dell laptops have separate button bits for v2 dualpoint ↵Hans de Goede2015-08-032-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sticks It turns out that only Dell laptops have the separate button bits for v2 dualpoint sticks and that commit 92bac83dd79e ("Input: alps - non interleaved V2 dualpoint has separate stick button bits") causes regressions on Toshiba laptops. This commit adds a check for Dell laptops to the code for handling these extra button bits, fixing this regression. This patch has been tested on a Dell Latitude D620 to make sure that it does not reintroduce the original problem. Reported-and-tested-by: Douglas Christman <douglaschristman@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: axp20x-pek - add module aliasChen-Yu Tsai2015-08-031-0/+1
| | | | | | | | | | | | | | | | Add a proper module alias so the driver can be autoloaded when the parent axp20x mfd driver registers its cells. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Carlo Caione <carlo@caione.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: turbografx - fix potential out of bound accessDmitry Torokhov2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 17dd3f0f7aa7: "[PATCH] drivers/input/joystick: convert to dynamic input_dev allocation" from Sep 15, 2005, leads to the following static checker warning: drivers/input/joystick/turbografx.c:235 tgfx_probe() error: buffer overflow 'tgfx_buttons' 5 <= 5 drivers/input/joystick/turbografx.c 195 for (i = 0; i < n_devs; i++) { 196 if (n_buttons[i] < 1) 197 continue; 198 199 if (n_buttons[i] > 6) { ^^^^^^^^^^^^^^^^ Possibly off by one. >= 6. Let's change the upper value to ARRAY_SIZE(tgfx_buttons) to ensure we do not reach past the end of the array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-08-0931-62/+130
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. No area does particularly stand out but we have a two unpleasant ones: - Kernel ptes are marked with a global bit which allows the kernel to share kernel TLB entries between all processes. For this to work both entries of an adjacent even/odd pte pair need to have the global bit set. There has been a subtle race in setting the other entry's global bit since ~ 2000 but it take particularly pathological workloads that essentially do mostly vmalloc/vfree to trigger this. This pull request fixes the 64-bit case but leaves the case of 32 bit CPUs with 64 bit ptes unsolved for now. The unfixed cases affect hardware that is not available in the field yet. - Instruction emulation requires loading instructions from user space but the current fast but simplistic approach will fail on pages that are PROT_EXEC but !PROT_READ. For this reason we temporarily do not permit this permission and will map pages with PROT_EXEC | PROT_READ. The remainder of this pull request is more or less across the field and the short log explains them well" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Make set_pte() SMP safe. MIPS: Replace add and sub instructions in relocate_kernel.S with addiu MIPS: Flush RPS on kernel entry with EVA Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook" MIPS: BMIPS: Delete unused Kconfig symbol MIPS: Export get_c0_perfcount_int() MIPS: show_stack: Fix stack trace with EVA MIPS: do_mcheck: Fix kernel code dump with EVA MIPS: SMP: Don't increment irq_count multiple times for call function IPIs MIPS: Partially disable RIXI support. MIPS: Handle page faults of executable but unreadable pages correctly. MIPS: Malta: Don't reinitialise RTC MIPS: unaligned: Fix build error on big endian R6 kernels MIPS: Fix sched_getaffinity with MT FPAFF enabled MIPS: Fix build with CONFIG_OF=y for non OF-enabled targets CPUFREQ: Loongson2: Fix broken build due to incorrect include.
| * | MIPS: Make set_pte() SMP safe.David Daney2015-08-051-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On MIPS the GLOBAL bit of the PTE must have the same value in any aligned pair of PTEs. These pairs of PTEs are referred to as "buddies". In a SMP system is is possible for two CPUs to be calling set_pte() on adjacent PTEs at the same time. There is a race between setting the PTE and a different CPU setting the GLOBAL bit in its buddy PTE. This race can be observed when multiple CPUs are executing vmap()/vfree() at the same time. Make setting the buddy PTE's GLOBAL bit an atomic operation to close the race condition. The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not* handled. Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Replace add and sub instructions in relocate_kernel.S with addiuJames Cowgill2015-08-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the assembler errors generated when compiling a MIPS R6 kernel with CONFIG_KEXEC on, by replacing the offending add and sub instructions with addiu instructions. Build errors: arch/mips/kernel/relocate_kernel.S: Assembler messages: arch/mips/kernel/relocate_kernel.S:27: Error: invalid operands `dadd $16,$16,8' arch/mips/kernel/relocate_kernel.S:64: Error: invalid operands `dadd $20,$20,8' arch/mips/kernel/relocate_kernel.S:65: Error: invalid operands `dadd $18,$18,8' arch/mips/kernel/relocate_kernel.S:66: Error: invalid operands `dsub $22,$22,1' scripts/Makefile.build:294: recipe for target 'arch/mips/kernel/relocate_kernel.o' failed Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10558/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Flush RPS on kernel entry with EVAJames Hogan2015-08-031-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When EVA is enabled, flush the Return Prediction Stack (RPS) present on some MIPS cores on entry to the kernel from user mode. This is important specifically for interAptiv with EVA enabled, otherwise kernel mode RPS mispredicts may trigger speculative fetches of user return addresses, which may be sensitive in the kernel address space due to EVA's overlapping user/kernel address spaces. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15.x- Patchwork: https://patchwork.linux-mips.org/patch/10812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook"Florian Fainelli2015-08-031-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3cf29543413207d3ab1c3f62a88c09bb46f2264e ("MIPS: BCM63xx: Provide a plat_post_dma_flush hook") since this commit was found to prevent BCM6358 (early BMIPS4350 cores) and some BCM6368 (BMIPS4380 cores) from booting reliably. Alvaro was able to track this down to an issue specifically located to devices that use the second thread (TP1) when booting. Since BCM63xx did not have a need for plat_post_dma_flush() hook before, let's just keep things the way they were. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: noltari@gmail.com Cc: jogo@openwrt.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: BMIPS: Delete unused Kconfig symbolKevin Cernekee2015-08-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was left over from an earlier iteration of the BMIPS irqchip changes. It doesn't actually have an effect, so let's nuke it. Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9910/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Export get_c0_perfcount_int()Felix Fietkau2015-08-036-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_c0_perfcount_int is tested from oprofile code. If oprofile is compiled as module, get_c0_perfcount_int needs to be exported, otherwise it cannot be resolved. Fixes: a669efc4a3b4 ("MIPS: Add hook to get C0 performance counter interrupt") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Cc: abrestic@chromium.org Patchwork: https://patchwork.linux-mips.org/patch/10763/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: show_stack: Fix stack trace with EVAJames Hogan2015-08-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The show_stack() function deals exclusively with kernel contexts, but if it gets called in user context with EVA enabled, show_stacktrace() will attempt to access the stack using EVA accesses, which will either read other user mapped data, or more likely cause an exception which will be handled by __get_user(). This is easily reproduced using SysRq t to show all task states, which results in the following stack dump output: Stack : (Bad stack address) Fix by setting the current user access mode to kernel around the call to show_stacktrace(). This causes __get_user() to use normal loads to read the kernel stack. Now we get the correct output, like this: Stack : 00000000 80168960 00000000 004a0000 00000000 00000000 8060016c 1f3abd0c 1f172cd8 8056f09c 7ff1e450 8014fc3c 00000001 806dd0b0 0000001d 00000002 1f17c6a0 1f17c804 1f17c6a0 8066f6e0 00000000 0000000a 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0110e800 1f3abd6c 1f17c6a0 ... Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/10778/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: do_mcheck: Fix kernel code dump with EVAJames Hogan2015-08-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a machine check exception is raised in kernel mode, user context, with EVA enabled, then the do_mcheck handler will attempt to read the code around the EPC using EVA load instructions, i.e. as if the reads were from user mode. This will either read random user data if the process has anything mapped at the same address, or it will cause an exception which is handled by __get_user, resulting in this output: Code: (Bad address in epc) Fix by setting the current user access mode to kernel if the saved register context indicates the exception was taken in kernel mode. This causes __get_user to use normal loads to read the kernel code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/10777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: SMP: Don't increment irq_count multiple times for call function IPIsAlex Smith2015-08-0314-31/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of SMP platforms handle their IPIs through do_IRQ() which calls irq_{enter/exit}(). When a call function IPI is received, smp_call_function_interrupt() is called which also calls irq_{enter,exit}(), meaning irq_count is raised twice. When tick broadcasting is used (which is implemented via a call function IPI), this incorrectly causes all CPU idle time on the core receiving broadcast ticks to be accounted as time spent servicing IRQs, as account_process_tick() will account as such if irq_count is greater than 1. This results in 100% CPU usage being reported on a core which receives its ticks via broadcast. This patch removes the SMP smp_call_function_interrupt() wrapper which calls irq_{enter,exit}(). Platforms which handle their IPIs through do_IRQ() now call generic_smp_call_function_interrupt() directly to avoid incrementing irq_count a second time. Platforms which don't (loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt() wrapped in irq_{enter,exit}(). Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Partially disable RIXI support.Ralf Baechle2015-08-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Execution of break instruction, trap instructions, emulation of unaligned loads or floating point instructions - anything that tries to read the instruction's opcode from userspace - needs read access to a page. RIXI (Read Inhibit / Execute Inhibit) support however allows the creation of pags that are executable but not readable. On such a mapping the attempted load of the opcode by the kernel is going to cause an endless loop of page faults. The quick workaround for this is to disable the combinations that the kernel currently isn't able to handle which are executable mappings. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Handle page faults of executable but unreadable pages correctly.Ralf Baechle2015-08-031-1/+2
| | | | | | | | | | | | | | | | | | | | | Without this we end taking execeptions in an endless loop hanging the thread. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Malta: Don't reinitialise RTCJames Hogan2015-08-031-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Malta, since commit a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot"), the RTC is reinitialised and forced into binary coded decimal (BCD) mode during init, even if the bootloader has already initialised it, and may even have already put it into binary mode (as YAMON does). This corrupts the current time, can result in the RTC seconds being an invalid BCD (e.g. 0x1a..0x1f) for up to 6 seconds, as well as confusing YAMON for a while after reset, enough for it to report timeouts when attempting to load from TFTP (it actually uses the RTC in that code). Therefore only initialise the RTC to the extent that is necessary so that Linux avoids interfering with the bootloader setup, while also allowing it to estimate the CPU frequency without hanging, without a bootloader necessarily having done anything with the RTC (for example when the kernel is loaded via EJTAG). The divider control is configured for a 32KHZ reference clock if necessary, and the SET bit of the RTC_CONTROL register is cleared if necessary without changing any other bits (this bit will be set when coming out of reset if the battery has been disconnected). Fixes: a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.14+ Patchwork: https://patchwork.linux-mips.org/patch/10739/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: unaligned: Fix build error on big endian R6 kernelsJames Cowgill2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") renamed the Load* and Store* defines in unaligned.c to _Load* and _Store* as part of its fix. One define was missed out which causes big endian R6 kernels to fail to build. arch/mips/kernel/unaligned.c:880:35: error: implicit declaration of function '_StoreDW' #define StoreDW(addr, value, res) _StoreDW(addr, value, res) ^ Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Fixes: eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10575/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Fix sched_getaffinity with MT FPAFF enabledFelix Fietkau2015-08-031-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | p->thread.user_cpus_allowed is zero-initialized and is only filled on the first sched_setaffinity call. To avoid adding overhead in the task initialization codepath, simply OR the returned mask in sched_getaffinity with p->cpus_allowed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10740/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: Fix build with CONFIG_OF=y for non OF-enabled targetsJonas Gorski2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF") changed the guards in asm/prom.h from CONFIG_OF to CONFIG_USE_OF, but missed the actual function declarations in kernel/prom.c, which have additional dependencies. Fixes the following build error: CC arch/mips/kernel/prom.o arch/mips/kernel/prom.c: In function '__dt_setup_arch': arch/mips/kernel/prom.c:54:2: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration] if (!early_init_dt_scan(bph)) ^ Fixes: 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF") Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Patchwork: https://patchwork.linux-mips.org/patch/10741/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | CPUFREQ: Loongson2: Fix broken build due to incorrect include.Ralf Baechle2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 71eeedcf51544831ae356a773814401143ed32d4 (MIPS: Lemote 2F: Fix build caused by recent mass rename.) only fixed one instance of this issue in arch/mips but missed a 2nd one in drivers/cpufreq/loongson2_cpufreq.c. [ralf@linux-mips.org: dropped the one segment for the already fixed instance and changed the other avoiding an include <path.h> without a / because that's generally is a bad idea.] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Patchwork: https://patchwork.linux-mips.org/patch/10659/
* | | Merge branch 'for-linus-4.2' of ↵Linus Torvalds2015-08-091-0/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "We have a btrfs quota regression fix. I merged this one on Thursday and have run it through tests against current master. Normally I wouldn't have sent this while you were finalizing rc6, but I'm feeding mosquitoes in the adirondacks next week, so I wanted to get this one out before leaving. I'll leave longer tests running and check on things during the week, but I don't expect any problems" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: qgroup: Fix a regression in qgroup reserved space.
| * | | btrfs: qgroup: Fix a regression in qgroup reserved space.Qu Wenruo2015-08-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the change to new btrfs extent-oriented qgroup implement, due to it doesn't use the old __qgroup_excl_accounting() for exclusive extent, it didn't free the reserved bytes. The bug will cause limit function go crazy as the reserved space is never freed, increasing limit will have no effect and still cause EQOUT. The fix is easy, just free reserved bytes for newly created exclusive extent as what it does before. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Yang Dongsheng <yangds.fnst@cn.fujitsu.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
* | | | Merge branch 'for-rc' of ↵Linus Torvalds2015-08-095-15/+20
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "Specifics: - fix an error that "weight_attr" sysfs attribute is not removed while unbinding. From: Viresh Kumar. - fix power allocator governor tracing to return the real request. From Javi Merino. - remove redundant owner assignment of hisi platform thermal driver. From Krzysztof Kozlowski. - a couple of small fixes of Exynos thermal driver. From Krzysztof Kozlowski and Chanwoo Choi" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: Drop owner assignment from platform_driver thermal: exynos: Remove unused code related to platform_data on probe() thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF thermal: exynos: Disable the regulator on probe failure thermal: power_allocator: trace the real requested power thermal: remove dangling 'weight_attr' device file
| * \ \ \ Merge branch 'fixes' of ↵Zhang Rui2015-08-034-14/+20
| |\ \ \ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into for-rc
| | * | | | thermal: exynos: Remove unused code related to platform_data on probe()Chanwoo Choi2015-08-021-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the unused code related to struct exynos_tmu_platform_data because exynos_tmu_probe() don't handle the struct exynos_tmu_platform_data *pdata. Test HW: Exynos4412 - Trats2 board Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
| | * | | | thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OFChanwoo Choi2015-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The exynos thermal driver use the of_thermal_*() API to parse the basic data for thermal management from devicetree file. So, if CONFIG_EXYNOS_THERMAL is selected without CONFIG_THERMAL_OF, kernel can build it without any problem. But, exynos thermal driver is not working with following error log. This patch add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF. [ 1.458644] get_th_reg: Cannot get trip points from of-thermal.c! [ 1.459096] get_th_reg: Cannot get trip points from of-thermal.c! [ 1.465211] exynos4412_tmu_initialize: No CRITICAL trip point defined at of-thermal.c! Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
| | * | | | thermal: exynos: Disable the regulator on probe failureKrzysztof Kozlowski2015-08-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During probe the regulator (if present) was enabled but not disabled in case of failure. So an unsuccessful probe lead to enabling the regulator which was actually not needed because the device was not enabled. Additionally each deferred probe lead to increase of regulator enable count so it would not be effectively disabled during removal of the device. Test HW: Exynos4412 - Trats2 board Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 498d22f616f6 ("thermal: exynos: Support for TMU regulator defined at device tree") Cc: <stable@vger.kernel.org> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
OpenPOWER on IntegriCloud