summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [media] si2157: support selection of IF interfaceOlli Salonen2015-05-1211-1/+26
| | | | | | | | | | | | | | The chips supported by the si2157 driver have two IF outputs (either pins 12+13 or pins 9+11). Instead of hardcoding the output to be used add an option to choose which output shall be used. As this patch changes the default behaviour, the IF interface is specified in each driver currently using si2157 driver. This is to keep bisectability. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si2168: add I2C error handlingOlli Salonen2015-05-121-0/+6
| | | | | | | | | Return error from si2168_cmd_execute in case the demodulator returns an error. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dvbsky: use si2168 config option ts_clock_gappedOlli Salonen2015-05-121-1/+2
| | | | | | | | | Change the dvbsky driver to support gapped clock instead of the current hack. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] si2168: add support for gapped clockOlli Salonen2015-05-123-0/+7
| | | | | | | | | Add a parameter in si2168_config to support gapped clock. This might be necessary on some devices with higher bitrates. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mantis: fix error handlingSilvan Jegen2015-05-121-20/+16
| | | | | | | | | | | | | | Remove dead code, make goto label names more expressive and add a label in order to call mantis_dvb_exit if mantis_uart_init fails. Also make sure that mantis_pci_exit is called if we fail the mantis_stream_control call and that we call mantis_i2c_exit if mantis_get_mac fails. [mchehab@osg.samsung.com: fix merge conflict] Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dw2102: TeVii S482 supportOlli Salonen2015-05-121-1/+13
| | | | | | | | | | | | | | | | | | TeVii S482 is a PCIe device with two tuners that actually contains two USB devices. The devices are visible in the lsusb printout. Bus 006 Device 002: ID 9022:d483 TeVii Technology Ltd. Bus 007 Device 002: ID 9022:d484 TeVii Technology Ltd. The device itself works exactly with the same settings as TechnoTrend TT-connect S2-4600. Firmware for DS3103 demodulator is required: http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/ This patch should be applied on top of the TT S2-4600 patch: https://patchwork.linuxtv.org/patch/28818/ Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] marvell-ccic: fix RGB444 formatHans Verkuil2015-05-121-5/+4
| | | | | | | | | | | | | | | | The RGB444 format swapped the red and blue components, fix this. Rather than making a new BGR444 format (as I proposed initially), Jon prefers to just fix this and return the colors in the right order. I think that makes sense in this case. Since the RGB444 pixel format is deprecated due to the ambiguous specification of the alpha component we use the XRGB444 pixel format instead (specified as having no alpha channel). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: i2c: ov2659: Use v4l2_of_alloc_parse_endpoint()Lad, Prabhakar2015-05-121-5/+14
| | | | | | | | | | Instead of parsing the link-frequencies property in the driver, let v4l2_of_alloc_parse_endpoint() do it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] constify of_device_id arrayFabian Frederick2015-05-126-7/+7
| | | | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) [mchehab@osg.samsung.com: fix a merge conflict at adv7604.c] Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] s5p-mfc: Set last buffer flagPhilipp Zabel2015-05-121-0/+1
| | | | | | | | | Setting the last buffer flag causes the videobuf2 core to return -EPIPE from DQBUF calls on the capture queue after the last buffer is dequeued. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] coda: Set last buffer flag and fix EOS eventPhilipp Zabel2015-05-123-18/+16
| | | | | | | | | | | | Setting the last buffer flag causes the videobuf2 core to return -EPIPE from DQBUF calls on the capture queue after the last buffer is dequeued. This patch also fixes the EOS event to conform to the specification. It now is sent right after the last buffer has been decoded instead of when the last buffer is dequeued. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] videobuf2: return -EPIPE from DQBUF after the last bufferPhilipp Zabel2015-05-123-2/+40
| | | | | | | | | | | | | | | If the last buffer was dequeued from a capture queue, let poll return immediately and let DQBUF return -EPIPE to signal there will no more buffers to dequeue until STREAMOFF. The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST. To reenable dequeuing on the capture queue, the driver must explicitly call vb2_clear_last_buffer_queued. The last buffer queued flag is cleared automatically during STREAMOFF. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] videodev2: Add V4L2_BUF_FLAG_LASTPeter Seiderer2015-05-122-1/+4
| | | | | | | | | | | | This v4l2_buffer flag can be used by drivers to mark a capture buffer as the last generated buffer, for example after a V4L2_DEC_CMD_STOP command was issued. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] DocBook media: document codec draining flowPhilipp Zabel2015-05-124-2/+40
| | | | | | | | | | | | | | Document the interaction between VIDIOC_DECODER_CMD V4L2_DEC_CMD_STOP and VIDIOC_ENCODER_CMD V4L2_ENC_CMD_STOP to start the draining, the V4L2_EVENT_EOS event signalling all capture buffers are finished and ready to be dequeud, the new V4L2_BUF_FLAG_LAST buffer flag indicating the last buffer being dequeued from the capture queue, and the poll and VIDIOC_DQBUF ioctl return values once the queue is drained. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: platform: s5p: Constify platform_device_idKrzysztof Kozlowski2015-05-123-3/+3
| | | | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> [k.debski@samsung.com: Fix misspelling in title (s/sp5/s5p/)] Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: platform: s3c-camif: Constify platform_device_idKrzysztof Kozlowski2015-05-121-1/+1
| | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: platform: exynos4-is: Constify platform_device_idKrzysztof Kozlowski2015-05-121-1/+1
| | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: platform: exynos-gsc: Constify platform_device_idKrzysztof Kozlowski2015-05-121-1/+1
| | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'v4.1-rc3' into patchworkMauro Carvalho Chehab2015-05-11451-2767/+5249
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.1-rc3 * tag 'v4.1-rc3': (381 commits) Linux 4.1-rc3 drm: Zero out invalid vblank timestamp in drm_update_vblank_count. m32r: make flush_cpumask non-volatile. mnt: Fix fs_fully_visible to verify the root directory is visible path_openat(): fix double fput() namei: d_is_negative() should be checked before ->d_seq validation ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow ARM: dts: Fix typo in trip point temperature for exynos5420/5440 ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420 MAINTAINERS: add Conexant Digicolor machines entry MAINTAINERS: socfpga: update the git repo for SoCFPGA drm/tegra: Don't use vblank_disable_immediate on incapable driver. mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE mmc: dw_mmc: init desc in dw_mci_idmac_init ARM: multi_v7_defconfig: Select more FSL SoCs MAINTAINERS: replace an AT91 maintainer drivers: CCI: fix used_mask init in validate_group() drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec ...
| * Linux 4.1-rc3v4.1-rc3Linus Torvalds2015-05-101-1/+1
| |
| * Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2015-05-1018-106/+230
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "I really need to get back to sending these on my Friday, instead of my Monday morning, but nothing too amazing in here: a few amdkfd fixes, a few radeon fixes, i915 fixes, one tegra fix and one core fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Zero out invalid vblank timestamp in drm_update_vblank_count. drm/tegra: Don't use vblank_disable_immediate on incapable driver. drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec drm/radeon: make UVD handle checking more strict drm/radeon: make VCE handle check more strict drm/radeon: fix userptr lockup drm/radeon: fix userptr BO unpin bug v3 drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it drm/radeon: don't setup audio on asics that don't support it drm/radeon: disable semaphores for UVD V1 (v2)
| | * Merge tag 'drm-intel-fixes-2015-05-08' of ↵Dave Airlie2015-05-113-9/+29
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-fixes misc i915 fixes. * tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it
| | | * drm/i915: Drop PIPE-A quirk for 945GSE HP MiniChris Wilson2015-05-071-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the introduction of BIOS fb preservation, circa 3.17, we began encountering a failure during boot when trying to use force-detect before GEM was initialised. That bug is from commit 7fad798e16fecddd41c6a91728a09f0b9507e40c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jul 4 17:51:47 2012 +0200 drm/i915: ensure the force pipe A quirk is actually followed but investigation of the affected machine revealed that it was using a PIPE-A quirk even though it was a 945GSE and the quirk is only supposed to be used to workaround a hardware issue on 830/845. That quirk was added for this HP Mini in commit 6b93afc564a5e74b0eaaa46c95f557449951b3b9 Author: Bryce Harrington <bryce@bryceharrington.org> Date: Wed May 27 03:40:52 2009 -0700 add pipe a force quirk for Dell mini in order to workaround an issue with the BIOS behaving strangely during lid-close. Since then we have a much larger hammer to thwart the BIOS after opening the lid and the PIPE-A quirk is no longer required. Reported-and-tested-by: Apostolos B. <barz621@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=21960 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87521 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | | * drm/i915: Sink rate read should be saved in deca-kHzSonika Jindal2015-05-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sink rate read from supported link rate table is in KHz as per spec while in drm, the saved clock is in deca-KHz. So divide the link rate by 10 before storing. Reading of rates was added by: commit fc0f8e25318f ("drm/i915/skl: Read sink supported rates from edp panel") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | | * drm/i915/dp: there is no audio on port AJani Nikula2015-05-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eDP port A register on PCH split platforms has a slightly different register layout from the other ports, with bit 6 being either alternate scrambler reset or reserved, depending on the generation. Our misinterpretation of the bit as audio has lead to warning. Fix this by not enabling audio on port A, since none of our platforms support audio on port A anyway. v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958 Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | | * drm/i915: Add missing MacBook Pro models with dual channel LVDSLukas Wunner2015-05-051-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz) as a BTO option, both versions used dual channel LVDS even though the smaller one would have fit into a single channel. Notes: Bug report showing that the MacBookPro8,2 with 1440x900 uses dual channel LVDS (this lead to it being hardcoded in intel_lvds.c by Daniel Vetter with commit 618563e3945b9d0864154bab3c607865b557cecc): https://bugzilla.kernel.org/show_bug.cgi?id=42842 If i915.lvds_channel_mode=2 is missing even though the machine needs it, every other vertical line is white and consequently, only the left half of the screen is visible (verified by myself on a MacBookPro9,1). Forum posting concerning a MacBookPro6,2 with 1440x900, author is using i915.lvds_channel_mode=2 on the kernel command line, proving that the machine uses dual channels: https://bbs.archlinux.org/viewtopic.php?id=185770 Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all MacBook Pro "A1286" models, and that model number encompasses the MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's driven with dual channel LVDS: http://www.ebay.com/itm/-/400690878560 http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286 http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones with i915 graphics and dual channel LVDS, so that list should be complete. And the 8,2 is already in intel_lvds.c. Possible motivation to use dual channel LVDS even on the 1440x900 models: Reduce the number of different parts, i.e. use identical logic boards and display cabling on both versions and the only differing component is the panel. Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org [Jani: included notes in the commit message for posterity] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | | * drm/i915: Assume dual channel LVDS if pixel clock necessitates itLukas Wunner2015-05-051-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Single channel LVDS maxes out at 112 MHz, anything above must be dual channel. This avoids the need to specify i915.lvds_channel_mode=2 on all 17" MacBook Pro models with i915 graphics since they had 1920x1200 (193 MHz), plus those 15" pre-retina models which had a resolution of 1680x1050 (119 MHz) as a BTO option. Source for 112 MHz limit of single channel LVDS is section 2.3 of: https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the resolution necessitates it, suggested by Jani Nikula. v3: Fix typo, thanks Joonas Lahtinen. v4: Split commit in two, suggested by Ville Syrjälä. Signed-off-by: Lukas Wunner <lukas@wunner.de> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org [Jani: included spec reference into the commit message] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | drm: Zero out invalid vblank timestamp in drm_update_vblank_count.Mario Kleiner2015-05-111-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 844b03f27739135fe1fed2fef06da0ffc4c7a081 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | drm/tegra: Don't use vblank_disable_immediate on incapable driver.Mario Kleiner2015-05-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra would not only need a hardware vblank counter that increments at leading edge of vblank, but also support for instantaneous high precision vblank timestamp queries, ie. a proper implementation of dev->driver->get_vblank_timestamp(). Without these, there can be off-by-one errors during vblank disable/enable if the scanout is inside vblank at en/disable time, and additionally clients will never see any useable vblank timestamps when querying via drmWaitVblank ioctl. This would negatively affect swap scheduling under X11 and Wayland. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | Merge tag 'drm-amdkfd-fixes-2015-05-07' of ↵Dave Airlie2015-05-082-4/+7
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Add missing initialization of SDMA vm register when creating an SDMA queue - Don't report local memory size, as we don't support local memory allocation yet. - Allow to unregister process with exisiting queues. Until now we blocked it with BUG_ON, which was also an error by itself. * tag 'drm-amdkfd-fixes-2015-05-07' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues
| | | * | drm/amdkfd: Initialize sdma vm when creating sdma queueXihan Zhang2015-05-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug where sdma vm wasn't initialized when an sdma queue was created in HWS mode. This caused GPUVM faults to appear on dmesg and it is one of the causes that SDMA queues are not working. Signed-off-by: Xihan Zhang <xihan.zhang@amd.com> Reviewed-by: Ben Goz <ben.goz@amd.comt> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
| | | * | drm/amdkfd: Don't report local memory sizeOded Gabbay2015-05-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets the local memory size that is reported to userspace to 0. This is done to make sure that userspace won't try to allocate local memory for HSA. As long as amdkfd doesn't support allocating local memory for HSA, we need this patch. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
| | | * | drm/amdkfd: allow unregister process with queuesOded Gabbay2015-05-071-2/+3
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes we might unregister process that have queues, because we couldn't preempt the queues. Until now we blocked it with BUG_ON but instead just print it as debug. Reviewed-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
| | * | Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2015-05-0811-87/+190
| | |\ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes Mostly stability fixes for UVD and VCE, plus a few other bug and regression fixes. * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec drm/radeon: make UVD handle checking more strict drm/radeon: make VCE handle check more strict drm/radeon: fix userptr lockup drm/radeon: fix userptr BO unpin bug v3 drm/radeon: don't setup audio on asics that don't support it drm/radeon: disable semaphores for UVD V1 (v2)
| | | * drm/radeon: stop trying to suspend UVD sessionsChristian König2015-05-072-21/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Saving the current UVD state on suspend and restoring it on resume just doesn't work reliable. Just close cleanup all sessions on suspend. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | | * drm/radeon: more strictly validate the UVD codecChristian König2015-05-071-2/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPEG 2/4 are only supported since UVD3. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | | * drm/radeon: make UVD handle checking more strictChristian König2015-05-071-29/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Invalid messages can crash the hw otherwise. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | | * drm/radeon: make VCE handle check more strictChristian König2015-05-071-17/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Invalid handles can crash the hw. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | | * drm/radeon: fix userptr lockupChristian König2015-05-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We shouldn't try to reserve and wait for a BO that isn't bound. Otherwise we can run into a deadlock if we have a fault during binding the BO. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | | * drm/radeon: fix userptr BO unpin bug v3monk.liu2015-05-071-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixing a memory leak with userptrs. v2: clean up the loop, use an iterator instead v3: remove unused variable Signed-off-by: monk.liu <monk.liu@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | | * drm/radeon: don't setup audio on asics that don't support itAlex Deucher2015-05-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bug: https://bugzilla.kernel.org/show_bug.cgi?id=97701 Reported-by: Mikael Pettersson <mikpelinux@gmail.com> Tested-by: Mikael Pettersson <mikpelinux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| | | * drm/radeon: disable semaphores for UVD V1 (v2)Christian König2015-05-045-13/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware doesn't seem to work correctly, just block userspace in this case. v2: add missing defines Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320 Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * | | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2015-05-107-19/+13
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM fixes from Russell King: "A set of ARM fixes: - fix an off-by-one error in the iommu DMA ops, which caused errors with a 4GiB size. - remove comments mentioning the non-existent CONFIG_CPU_ARM1020_CPU_IDLE macro. - remove useless CONFIG_CPU_ICACHE_STREAMING_DISABLE blocks, where this symbol never appeared in any Kconfig. - fix Feroceon code to cope with a previous change correctly (it incorrectly left an additional word in an assembly structure definition) - avoid a misleading IRQ affinity warning in the ARM PMU code for IRQs which are already affine to their CPUs. - fix the node name printed in the IRQ affinity warning" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8352/1: perf: Fix the pmu node name in warning message ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops
| | * | | ARM: 8352/1: perf: Fix the pmu node name in warning messageWill Deacon2015-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property"), we print a warning when we find a PMU SPI with a missing missing interrupt-affinity property in a pmu node. Unfortunately, we pass the wrong (NULL) device node to of_node_full_name, resulting in unhelpful messages such as: hw perfevents: Failed to parse <no-node>/interrupt-affinity[0] This patch fixes the name to that of the pmu node. Fixes: 9fd85eb502a7 (ARM: pmu: add support for interrupt-affinity property) Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIsWill Deacon2015-05-031-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PPIs are affine by nature, so the interrupt-affinity property is not used and therefore we shouldn't print a warning in its absence. Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macroAndrew Lunn2015-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") broke booting for Kirkwood. The kernel would say: Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported processor variant (0x56251311). Fix it by removing the extraneous .long __feroceon_setup from the feroceon_proc_info macro. Fixes: bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef blockValentin Rothberg2015-05-031-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The block could never be compiled; CPU_ICACHE_STREAMING_DISABLE has not been defined in Kconfig since the very first Git commit. Hence, we can safely remove the entire block. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLEValentin Rothberg2015-05-032-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU_ARM1020_CPU_IDLE is not defined in Kconfig. The last reference on LKML dates back to 2001, so we can safely remove the comments to make static analysis tools happy. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_opsMarek Szyprowski2015-05-032-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 22b3c181c6c324a46f71aae806d8ddbe61d25761 ("arm: dma-mapping: limit IOMMU mapping size") added a check for IO address space size. However this patch broke IOMMU initialization for typical platforms initialized from device tree, which get the default IO address space size of 4GiB. This value doesn't fit into size_t and fails a check introduced by that commit resulting in failed dma-mapping/iommu initialization. This patch fixes this issue by adding proper support for full 4GiB address space size. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | Merge tag 'samsung-fixes-1' of ↵Linus Torvalds2015-05-105-2/+7
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung Pull samsung fixes from Kukjin Kim: "Here is Samsung fixes for v4.1. Since I've missed to send this via arm-soc tree before v4.1-rc3, so I'm sending this to you directly - fix commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") which causes 'unhandled fault: imprecise external abort' error when PD turned off. ("make DP a consumer of DISP1 power domain") - fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add 'rtc_src' clock to rtc node for source clock of rtc") - fix typo for 'cpu-crit-0' trip point on exynos5420/5440 - fix S2R failure on exynos5250-snow due to card power of Marvell WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi SDIO node")" * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow ARM: dts: Fix typo in trip point temperature for exynos5420/5440 ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
OpenPOWER on IntegriCloud