summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* i2c: Simplify i2c_device_probeJean Delvare2008-07-141-7/+2
| | | | | | | i2c_driver.id_table is mandatory now, so we can simplify i2c_device_probe() a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/eeprom: Fall back to SMBus read word transactionsJean Delvare2008-07-141-20/+19
| | | | | | | | | | | | | | | | | | | | | | When I2C block reads are not supported by the underlying adapter, use SMBus read word transactions instead of consecutive byte reads. Reasons for this change are: * The consecutive byte read approach is not safe on multi-master buses. * While consecutive byte reads have less overhead if you only count the bytes on the bus, it takes more than twice as many transactions as with SMBus read word transactions, and each transaction has a cost: taking and releasing the adapter mutex, and for polling drivers, waiting for the transaction to complete. This change yields a significant performance boost at HZ=250 with EEPROMs on an Intel 82801 bus (basically twice as fast.) SMBus read word transactions are widely supported so I don't expect compatibility issues. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/eeprom: Only probe buses with DDC or SPD classJean Delvare2008-07-141-0/+8
| | | | | | | The eeprom driver shouldn't probe i2c buses which don't want to be probed. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Let bus drivers add SPD to their classJean Delvare2008-07-1429-30/+31
| | | | | | | | | | | | | | | | | | Let general purpose I2C/SMBus bus drivers add SPD to their class. Once this is done, we will be able to tell the eeprom driver to only probe for SPD EEPROMs and similar on these buses. Note that I took a conservative approach here, adding I2C_CLASS_SPD to many drivers that have no idea whether they can host SPD EEPROMs or not. This is to make sure that the eeprom driver doesn't stop probing buses where SPD EEPROMs or equivalent live. So, bus driver maintainers and users should feel free to remove the SPD class from drivers those buses never have SPD EEPROMs or they don't want the eeprom driver to bind to them. Likewise, feel free to add the SPD class to any bus driver I might have missed. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Let framebuffer drivers set their I2C bus class to DDCJean Delvare2008-07-144-11/+24
| | | | | | | | Let framebuffer drivers set their I2C bus class to DDC. Once this is done, we will be able to tell the eeprom driver to only probe for EDID EEPROMs on these buses. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add MAINTAINER entry for i2c-cpmJochen Friedrich2008-07-141-0/+7
| | | | | Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-cpm: BugfixesWolfram Sang2008-07-141-4/+4
| | | | | | | | | | | | Bugfixes to the i2c-cpm driver - enable correct interrupts (I2CER_TXE instead of I2CER_BUSY) - replace forgotten iic with i2c - prefix debug-output on init with 0x and add frequency Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllersJochen Friedrich2008-07-143-0/+756
| | | | | | | | | | | | | This driver uses the port of 2.4 code from Vitaly Bordug <vitb@kernel.crashing.org> and the actual algorithm used by the i2c driver of the DBox code on cvs.tuxboc.org from Felix Domke (tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and CPM2 (MPC8272). Signed-off-by: Jochen Friedrich <jochen@scram.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Push ioctl BKL down into the i2c codeAlan Cox2008-07-141-3/+2
| | | | | | | | | | This is part of the effort to get rid of the BKL. [JD: In fact i2c-dev doesn't need more locking than is already done for the other i2c drivers, so we can simply switch to unlocked_ioctl.] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add Intel SCH SMBus supportAlek Du2008-07-143-0/+347
| | | | | | | | New i2c bus driver for the Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L). Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Simplify i2c_del_driver()Jean Delvare2008-07-141-6/+4
| | | | | | i2c_del_driver() can be simplified a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Use list_for_each_entry_safeMatthias Kaehlcke2008-07-141-8/+4
| | | | | | | Use list_for_each_entry_safe() in i2c_del_adapter() and i2c_del_driver(). Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-pca-platform: Fix error codeWolfram Sang2008-07-141-1/+1
| | | | | | | Fix errorcode to be more descriptive when ioremap fails. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-pca-algo: Fix error codeWolfram Sang2008-07-141-1/+1
| | | | | | | Give a more concrete error code, when the bus is not idle. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Consistently reject unsupported transactionsJean Delvare2008-07-1410-34/+23
| | | | | | | | | Many PC SMBus host controller drivers don't properly handle the case where they are requested to achieve a transaction they do not support. Update them so that the consistently print a warning message and return a single error value in this case. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-piix4: Various cleanups and minor fixesJean Delvare2008-07-141-26/+15
| | | | | | | | | | | | | | | | | | | | | | The i2c-piix4 driver was used recently as a model to write a new SMBus host controller driver and this made me realize that the code of this old driver wasn't exactly good. So, here are many cleanups and minor fixes to this driver, so that these minor mistakes aren't duplicated again: * Delete unused structure. * Delete needless forward function declaration. * Properly announce the SMBus host controller as we find it. * Spell it SMBus not SMB. * Return -EBUSY instead of -ENODEV when the I/O region is already in use. * Drop useless masks on the 7-bit address and the R/W bit. * Reject block transaction requests with an invalid block length. * Check and report block transaction replies with an invalid block length. * Delete a useless comment. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Bus drivers return -Errno not -1David Brownell2008-07-1415-148/+191
| | | | | | | | | | | | | | | Tighten error paths used by various i2c adapters (mostly x86) so they return real fault/errno codes instead of a "-1" (which is most often interpreted as "-EPERM"). Build tested, with eyeball review. One minor initial goal is to have adapters consistently return the code "-ENXIO" when addressing a device doesn't get an ACK response, at least in the probe paths where they are already good at stifling related logspam. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: i2c_use_client() defends against NULLDavid Brownell2008-07-141-3/+5
| | | | | | | | | | | Defend the i2c refcount calls against NULL pointers, as is important (and conventional) for such calls. Note that none of the current callers of i2c_use_client() use its return value. [JD: I hate this but apparently all the other subsystems do it so...] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Kerneldoc for most I/O callsDavid Brownell2008-07-141-9/+124
| | | | | | | | | | Provide kerneldoc for most of the I2C and SMBus I/O calls. Add a comment summarizing some fault reporting issues which affect the ability to provide clean fault reports through I2C master transfer calls. (Making it hard to precisely specify their return values...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Update stray references to smbus_accessJean Delvare2008-07-141-2/+2
| | | | | | That function is actually named i2c_smbus_xfer. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Delete unused function i2c_smbus_write_quickJean Delvare2008-07-144-17/+9
| | | | | | | | | Function i2c_smbus_write_quick has no users left, so we can delete it. Also update the list of these helper functions which are gone but could be added back if needed. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Group bus drivers by typeJean Delvare2008-07-142-344/+370
| | | | | | | | The list of I2C/SMBus bus drivers is growing and it is sometimes difficult for the users to figure out what drivers they should enable. By grouping the drivers by type, I hope to make the selection easier. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-core: Return -Errno, not -1David Brownell2008-07-142-48/+57
| | | | | | | | | | | More updates to the I2C stack's fault reporting: make the core stop returning "-1" (usually "-EPERM") for all faults. Instead, pass lower level fault code up the stack, or return some appropriate errno. This patch happens to touch almost exclusively SMBus calls. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-core: Remove needless includeJean Delvare2008-07-141-1/+0
| | | | | | | i2c-core doesn't use seq files, so doesn't need to include <linux/seq_file.h>. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Document standard fault codesDavid Brownell2008-07-141-0/+127
| | | | | | | | | Create Documentation/i2c/fault-codes to help standardize fault/error code usage in the I2C stack. It turns out that returning -1 (-EPERM) for everything was not at all helpful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-bfin-twi: Update the dependenciesMike Frysinger2008-07-141-3/+2
| | | | | | | | | Since only a few Blackfins lack TWI, just list them in a depends statement. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Remove 3 deprecated bus driversAdrian Bunk2008-07-1410-929/+0
| | | | | | | | This patch contains the scheduled removal of i2c-i810, i2c-prosavage and i2c-savage4. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-nforce2: Add support for multiplexing on the Tyan S4985Jean Delvare2008-07-144-0/+287
| | | | | | | | | | | | | | Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-davinci: Initialize cmd_complete soonerTroy Kisky2008-07-141-1/+2
| | | | | | | | | If an interrupt happens before an I2c master read/write, complete is called on uninitialized structure. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-davinci: Fix signal handling bugTroy Kisky2008-07-141-10/+52
| | | | | | | | | If wait_for_completion_interruptible_timeout exits due to a signal, the i2c bus was locking up. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-davinci: Remove useless IVR readTroy Kisky2008-07-141-4/+0
| | | | | | | | | | | | Interrupts are enabled at the point where the DAVINCI_I2C_IVR_REG is read, so unless an interrupt happened just at that moment, no interrupt would be pending. Even though documentation implies you should do this, I see no reason. If slave support is added, this read would cause a hard to reproduce bug. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-davinci: Move dev_dbg statement for more outputTroy Kisky2008-07-141-3/+2
| | | | | | | | | Previously the dev_dbg only printed if no error. Printing also on an error is more useful Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-davinci: Ensure clock between 7-12 MHzTroy Kisky2008-07-141-4/+11
| | | | | | | | Ensure psc value gives a clock between 7-12 MHz Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Use class_for_each_deviceDave Young2008-07-141-44/+48
| | | | | | | Use class_for_each_device for iteration. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Linux 2.6.26v2.6.26Linus Torvalds2008-07-131-1/+1
|
* devcgroup: fix permission check when adding entry to child cgroupLi Zefan2008-07-131-1/+1
| | | | | | | | | | | | | | | | | | | # cat devices.list c 1:3 r # echo 'c 1:3 w' > sub/devices.allow # cat sub/devices.list c 1:3 w As illustrated, the parent group has no write permission to /dev/null, so it's child should not be allowed to add this write permission. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* devcgroup: always show positive major/minor numLi Zefan2008-07-131-2/+2
| | | | | | | | | | | | | | | | | # echo "b $((0x7fffffff)):$((0x80000000)) rwm" > devices.allow # cat devices.list b 214748364:-21474836 rwm though a major/minor number of 0x800000000 is meaningless, we should not cast it to a negative value. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Documentation/HOWTO: correct wrong kernel bugzilla FAQ URLJiri Pirko2008-07-131-1/+1
| | | | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2008-07-131-6/+18
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: cpusets, hotplug, scheduler: fix scheduler domain breakage
| * cpusets, hotplug, scheduler: fix scheduler domain breakageDmitry Adamushko2008-07-131-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f18f982ab ("sched: CPU hotplug events must not destroy scheduler domains created by the cpusets") introduced a hotplug-related problem as described below: Upon CPU_DOWN_PREPARE, update_sched_domains() -> detach_destroy_domains(&cpu_online_map) does the following: /* * Force a reinitialization of the sched domains hierarchy. The domains * and groups cannot be updated in place without racing with the balancing * code, so we temporarily attach all running cpus to the NULL domain * which will prevent rebalancing while the sched domains are recalculated. */ The sched-domains should be rebuilt when a CPU_DOWN ops. has been completed, effectively either upon CPU_DEAD{_FROZEN} (upon success) or CPU_DOWN_FAILED{_FROZEN} (upon failure -- restore the things to their initial state). That's what update_sched_domains() also does but only for !CPUSETS case. With f18f982ab, sched-domains' reinitialization is delegated to CPUSETS code: cpuset_handle_cpuhp() -> common_cpu_mem_hotplug_unplug() -> rebuild_sched_domains() Being called for CPU_UP_PREPARE and if its callback is called after update_sched_domains()), it just negates all the work done by update_sched_domains() -- i.e. a soon-to-be-offline cpu is included in the sched-domains and that makes it visible for the load-balancer while the CPU_DOWN ops. is in progress. __migrate_live_tasks() moves the tasks off a 'dead' cpu (it's already "offline" when this function is called). try_to_wake_up() is called for one of these tasks from another CPU -> the load-balancer (wake_idle()) picks up a "dead" CPU and places the task on it. Then e.g. BUG_ON(rq->nr_running) detects this a bit later -> oops. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Paul Menage <menage@google.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: miaox@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2008-07-121-2/+2
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix ldt limit for 64 bit
| * | x86: fix ldt limit for 64 bitMichael Karcher2008-07-121-2/+2
| | | | | | | | | | | | | | | | | | | | | Fix size of LDT entries. On x86-64, ldt_desc is a double-sized descriptor. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2008-07-125-7/+31
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bsg: fix oops on remove [SCSI] fusion: default MSI to disabled for SPI and FC controllers [SCSI] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices [SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work() [SCSI] erase invalid data returned by device
| * | | [SCSI] bsg: fix oops on removeJames Bottomley2008-07-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you do a modremove of any sas driver, you run into an oops on shutdown when the host is removed (coming from the host bsg device). The root cause seems to be that there's a use after free of the bsg_class_device: In bsg_kref_release_function, this is used (to do a put_device(bcg->parent) after bcg->release has been called. In sas (and possibly many other things) bcd->release frees the queue which contains the bsg_class_device, so we get a put_device on unreferenced memory. Fix this by taking a copy of the pointer to the parent before releasing bsg. Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] fusion: default MSI to disabled for SPI and FC controllersJames Bottomley2008-07-121-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a fault on the FC controllers that makes them not respond correctly to MSI. The SPI controllers are fine, but are likely to be onboard on older motherboards which don't handle MSI correctly, so default both these cases to disabled. Enable by setting the module parameter mpt_msi_enable=1. For the SAS case, enable MSI by default, but it can be disabled by setting the module parameter mpt_msi_enable=0. Cc: "Prakash, Sathya" <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] ipr: Fix HDIO_GET_IDENTITY oops for SATA devicesBrian King2008-07-111-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, ipr does not support HDIO_GET_IDENTITY to SATA devices. An oops occurs if userspace attempts to send the command. Since hald issues the command, ensure we fail the ioctl in ipr. This is a temporary solution to the oops. Once the ipr libata EH conversion is upstream, ipr will fully support HDIO_GET_IDENTITY. Tested-by: Milton Miller <miltonm@bga.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work()James Bottomley2008-07-081-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem here is that if the ioc faults too early in the bring up sequence (as it usually does for an irq routing problem), ioc_reset gets called before the scsi host is even allocated. This causes an oops when it later schedules a renegotiation. Fix this by checking ioc->sh before trying to renegotiate. Cc: "Moore, Eric" <Eric.Moore@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] erase invalid data returned by deviceAlan Stern2008-07-061-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1108) fixes a problem that can occur with certain USB mass-storage devices: They return invalid data together with a residue indicating that the data should be ignored. Rather than leave the invalid data in a transfer buffer, where it can get misinterpreted, the patch clears the invalid portion of the buffer. This solves a problem (wrong write-protect setting detected) reported by Maciej Rutecki and Peter Teoh. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Peter Teoh <htmldeveloper@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | | | cifs: fix wksidarr declaration to be big-endian friendlyJeff Layton2008-07-121-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current definition of wksidarr works fine on little endian arches (since cpu_to_le32 is a no-op there), but on big-endian arches, it fails to compile with this error: error: braced-group within expression allowed only inside a function The problem is that this static declaration has cpu_to_le32 embedded within it, and that expands into a function macro. We need to use __constant_cpu_to_le32() instead. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Steven French <sfrench@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | cifs: fix inode leak in cifs_get_inode_info_unixJeff Layton2008-07-121-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Try this: mount a share with unix extensions create a file on it umount the share You'll get the following message in the ring buffer: VFS: Busy inodes after unmount of cifs. Self-destruct in 5 seconds. Have a nice day... ...the problem is that cifs_get_inode_info_unix is creating and hashing a new inode even when it's going to return error anyway. The first lookup when creating a file returns an error so we end up leaking this inode before we do the actual create. This appears to be a regression caused by commit 0e4bbde94fdc33f5b3d793166b21bf768ca3e098. The following patch seems to fix it for me, and fixes a minor formatting nit as well. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud