summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* clocksource: dw_apb_timer_of: Fix support for dts binding "snps,dw-apb-timer"Dinh Nguyen2013-12-101-2/+3
| | | | | | | | | | In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both "snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place of "snps,dw-apb-timer". But the driver also needs to be udpated in order to support this new binding "snps,dw-apb-timer". Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: dw_apb_timer_of: Fix read_sched_clockDinh Nguyen2013-12-101-1/+1
| | | | | | | | | The read_sched_clock should return the ~value because the clock is a countdown implementation. read_sched_clock() should be the same as __apbt_read_clocksource(). Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: sunxi: Stop timer from ticking before enabling interruptsMarc Zyngier2013-12-101-0/+3
| | | | | | | | | | | | | | | | The sun4i timer can still be ticking when we enable the interrupt. If another timer is actually used (A7 architected timer, for example), odds are that the interrupt will eventually fire with the event_handler pointer being NULL. The obvious fix it to stop the timer before registering the interrupt. Observed and tested on sun7i (cubietruck). Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: clksrc-of: Do not drop unheld reference on device nodeThierry Reding2013-12-101-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | When booting a recent kernel on ARM with OF_DYNAMIC enabled, the kernel warns about the following: [ 0.000000] ERROR: Bad of_node_put() on /timer@50004600 [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-next-20131017-00077-gedfd827-dirty #406 [ 0.000000] [<c0015b68>] (unwind_backtrace+0x0/0xf4) from [<c00117e4>] (show_stack+0x10/0x14) [ 0.000000] [<c00117e4>] (show_stack+0x10/0x14) from [<c055f734>] (dump_stack+0x9c/0xc8) [ 0.000000] [<c055f734>] (dump_stack+0x9c/0xc8) from [<c03b47d4>] (of_node_release+0x90/0x9c) [ 0.000000] [<c03b47d4>] (of_node_release+0x90/0x9c) from [<c03b5084>] (of_find_matching_node_and_match+0x78/0xb4) [ 0.000000] [<c03b5084>] (of_find_matching_node_and_match+0x78/0xb4) from [<c07887c8>] (clocksource_of_init+0x60/0x70) [ 0.000000] [<c07887c8>] (clocksource_of_init+0x60/0x70) from [<c076e99c>] (start_kernel+0x1f4/0x33c) [ 0.000000] [<c076e99c>] (start_kernel+0x1f4/0x33c) from [<80008074>] (0x80008074) This is caused by clocksource_of_init() dropping a reference on the device node that it never took. The reference taken by the loop is implicitly dropped on subsequent iterations. See the implementation of and the comment on top of the of_find_matching_node_and_match() function for reference (no pun intended). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* clocksource: armada-370-xp: Register sched_clock after the counter resetEzequiel Garcia2013-12-101-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit registers the sched_clock _after_ the counter reset (instead of before). This removes the timestamp 'jump' in kernel log messages. Before this change: [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000000] Initializing Coherency fabric [ 0.000000] Aurora cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB [ 163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) [ 163.521419] pid_max: default: 32768 minimum: 301 [ 163.526185] Mount-cache hash table entries: 512 [ 163.531095] CPU: Testing write buffer coherency: ok After this change: [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000000] Initializing Coherency fabric [ 0.000000] Aurora cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB [ 0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) [ 0.030820] pid_max: default: 32768 minimum: 301 [ 0.035588] Mount-cache hash table entries: 512 [ 0.040500] CPU: Testing write buffer coherency: ok Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
* clocksource: time-efm32: Select CLKSRC_MMIOAxel Lin2013-12-101-0/+1
| | | | | | | | | The time-efm32 driver uses the clocksource MMIO functions. Thus it needs to select CLKSRC_MMIO in Kconfig. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=offThomas Gleixner2013-11-291-1/+3
| | | | | | | | | | | | | | | If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by: Michal Hocko <mhocko@suse.cz> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'clockevents/fixes' of ↵Thomas Gleixner2013-11-264-10/+34
|\ | | | | | | | | | | | | | | git://git.linaro.org/people/dlezcano/linux into timers/urgent * Hide event stream Kconfig option for the arch_arm_timer for ARM=n * Fix a missing a clk_put in case the registering of the sh_mtu[2] drivers fails. * Reuse clockevents_config_and_register for the at91rm9200_time timer
| * clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARMStephen Boyd2013-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Pavel Machek reports that this config is exposed on x86 where the ARM architected timers aren't even present. Make it depend on the ARM architected timers being selected so that non-ARM builds aren't asked about it. Reported-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| * clocksource: sh_tmu: Add clk_prepare/unprepare supportLaurent Pinchart2013-11-201-1/+8
| | | | | | | | | | | | | | | | | | | | | | Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| * clocksource: sh_tmu: Release clock when sh_tmu_register() failsLaurent Pinchart2013-11-201-3/+10
| | | | | | | | | | | | | | | | | | | | | | Fix the probe error path to release the clock resource when the sh_tmu_register() call fails. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| * clocksource: sh_mtu2: Add clk_prepare/unprepare supportLaurent Pinchart2013-11-201-2/+7
| | | | | | | | | | | | | | | | | | | | | | Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| * clocksource: sh_mtu2: Release clock when sh_mtu2_register() failsLaurent Pinchart2013-11-201-2/+9
| | | | | | | | | | | | | | | | | | | | | | Fix the probe error path to release the clock resource when the sh_mtu2_register() call fails. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| * ARM: at91: rm9200: switch back to clockevents_config_and_registerUwe Kleine-König2013-11-201-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer code for at91rm9200 was already converted some time ago by Shawn Guo in commit 838a2ae (ARM: use clockevents_config_and_register() where possible) but because of a rounding issue in the timer core this resulted in an easily reproducible oops. So it was reverted (commit b7a8ca5 (ARM: at91: rm9200 fix time support)) which stopped the oops from happening because min_delta_ns is increased by one in arch code which stopped from problem from happening. Now that the timer core problem is fixed (commit a4578ea (clockevents: Sanitize ticks to nsec conversion)), we can switch back to the clockevents_config_and_register helper. Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* | time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLDMartin Schwidefsky2013-11-221-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 1e75fa8be9f (time: Condense timekeeper.xtime into xtime_sec - merged in v3.6), there has been an problem with the error accounting in the timekeeping code, such that when truncating to nanoseconds, we round up to the next nsec, but the balancing adjustment to the ntp_error value was dropped. This causes 1ns per tick drift forward of the clock. In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD architectures (s390, ia64, powerpc). The fix is simply to balance the accounting and to subtract the added nanosecond from ntp_error. This allows the internal long-term clock steering to keep the clock accurate. While this fix removes the regression added in 1e75fa8be9f, the ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD and use the new VSYSCALL method, which avoids entirely the nanosecond granular rounding, and the resulting short-term clock adjustment oscillation needed to keep long term accurate time. [ jstultz: Many thanks to Martin for his efforts identifying this subtle bug, and providing the fix. ] Originally-from: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Paul Turner <pjt@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable <stable@vger.kernel.org> #v3.6+ Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* tick: Document tick_do_timer_cpuAndrew Morton2013-11-191-0/+15
| | | | | | | Taken straight from a tglx email ;) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)Joe Perches2013-11-191-3/+2
| | | | | | | | Use the helper function instead of __GFP_ZERO. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* NOHZ: Check for nohz active instead of nohz enabledThomas Gleixner2013-11-192-14/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | RCU and the fine grained idle time accounting functions check tick_nohz_enabled. But that variable is merily telling that NOHZ has been enabled in the config and not been disabled on the command line. But it does not tell anything about nohz being active. That's what all this should check for. Matthew reported, that the idle accounting on his old P1 machine showed bogus values, when he enabled NOHZ in the config and did not disable it on the kernel command line. The reason is that his machine uses (refined) jiffies as a clocksource which explains why the "fine" grained accounting went into lala land, because it depends on when the system goes and leaves idle relative to the jiffies increment. Provide a tick_nohz_active indicator and let RCU and the accounting code use this instead of tick_nohz_enable. Reported-and-tested-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: john.stultz@linaro.org Cc: mwhitehe@redhat.com Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de
* seq_file: always clear m->count when we free m->bufAl Viro2013-11-181-1/+2
| | | | | | | | | Once we'd freed m->buf, m->count should become zero - we have no valid contents reachable via m->buf. Reported-by: Charley (Hao Chuan) Chu <charley.chu@broadcom.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2013-11-18103-407/+905
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog changes from Wim Van Sebroeck: - addition of MOXA ART watchdog driver (moxart_wdt) - addition of CSR SiRFprimaII and SiRFatlasVI watchdog driver (sirfsoc_wdt) - addition of ralink watchdog driver (rt2880_wdt) - various fixes and cleanups (__user annotation, ioctl return codes, removal of redundant of_match_ptr, removal of unnecessary amba_set_drvdata(), use allocated buffer for usb_control_msg, ...) - removal of MODULE_ALIAS_MISCDEV statements - watchdog related DT bindings - first set of improvements on the w83627hf_wdt driver * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: w83627hf: Use helper functions to access superio registers watchdog: w83627hf: Enable watchdog device only if not already enabled watchdog: w83627hf: Enable watchdog only once watchdog: w83627hf: Convert to watchdog infrastructure watchdog: omap_wdt: raw read and write endian fix watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE watchdog: pcwd_usb: overflow in usb_pcwd_send_command() watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe() watchdog: watchdog_core: Fix a trivial typo watchdog: dw: Enable OF support for DW watchdog timer watchdog: Get rid of MODULE_ALIAS_MISCDEV statements watchdog: ts72xx_wdt: Propagate return value from timeout_to_regval watchdog: pcwd_usb: Use allocated buffer for usb_control_msg watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata() watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI watchdog: Remove redundant of_match_ptr watchdog: ts72xx_wdt: cleanup return codes in ioctl documentation/devicetree: Move DT bindings from gpio to watchdog watchdog: add ralink watchdog driver watchdog: Add MOXA ART watchdog driver ...
| * watchdog: w83627hf: Use helper functions to access superio registersGuenter Roeck2013-11-181-56/+76
| | | | | | | | | | | | | | | | | | | | | | Use helper functions named similar to other drivers to access superio registers. Request memory region only when needed, and use request_muxed_region(). This lets other devices (hwmon, gpio) use the same region. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: w83627hf: Enable watchdog device only if not already enabledGuenter Roeck2013-11-181-1/+3
| | | | | | | | | | | | | | | | | | | | There is no need to enable the watchdog device if it is already enabled. Also, when enabling the watchdog device, only set the watchdog device enable bit and do not touch other bits; depending on the chip type, those bits may enable other functionality. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: w83627hf: Enable watchdog only onceGuenter Roeck2013-11-181-18/+17
| | | | | | | | | | | | | | | | It is unnecessary to enable the logical device and WDT0 each time the watchdog is accessed. Do it only once during initialization. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: w83627hf: Convert to watchdog infrastructureGuenter Roeck2013-11-182-168/+48
| | | | | | | | | | Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: omap_wdt: raw read and write endian fixVictor Kamensky2013-11-171-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATEUwe Kleine-König2013-11-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | As CSR SiRF is converted to multi platform CLOCK_TICK_RATE is a dummy value that seems to match the right value is used. (arch/arm/mach-prima2/include/mach/timex.h which defined CLOCK_TICK_RATE to 1000000 was removed in commit cf82e0e (ARM: sirf: enable multiplatform support); marco used the same file.) To not depend on that dummy value use a local #define instead. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: pcwd_usb: overflow in usb_pcwd_send_command()Dan Carpenter2013-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | We changed "buf" from being an array of 6 chars to being a pointer this sizeof(buf) needs to be updated as well. Fixes: 2ddb8089a7e5 ('watchdog: pcwd_usb: Use allocated buffer for usb_control_msg') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe()Wei Yongjun2013-11-171-1/+1
| | | | | | | | | | | | | | | | | | In case of error, the function devm_request_and_ioremap() returns NULL pointer not ERR_PTR(). Fix it by using devm_ioremap_resource() instead of devm_request_and_ioremap(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: watchdog_core: Fix a trivial typoSachin Kamat2013-11-171-1/+1
| | | | | | | | | | | | | | | | Fixed a trivial typo. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: dw: Enable OF support for DW watchdog timerDinh Nguyen2013-11-172-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree support to the DW watchdog timer. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org
| * watchdog: Get rid of MODULE_ALIAS_MISCDEV statementsJean Delvare2013-11-1787-112/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
| * watchdog: ts72xx_wdt: Propagate return value from timeout_to_regvalGuenter Roeck2013-11-171-1/+1
| | | | | | | | | | | | | | timeout_to_regval() returns a valid error code. Might as well use it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: pcwd_usb: Use allocated buffer for usb_control_msgGuenter Roeck2013-11-171-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | usb_control_msg() must use a dma-capable buffer. This fixes the following error reported by smatch: drivers/watchdog/pcwd_usb.c:257 usb_pcwd_send_command() error: doing dma on the stack (buf) Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata()Michal Simek2013-11-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVIXianglong Du2013-11-175-0/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On CSR SiRFprimaII and SiRFatlasVI, the 6th timer can act as a watchdog timer when the Watchdog mode is enabled. watchdog occur when TIMER watchdog counter matches the value software pre-set, when this event occurs, the effect is the same as the system software reset. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Romain Izard <romain.izard.pro@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: Remove redundant of_match_ptrSachin Kamat2013-11-173-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_match_ptr() is a macro used to avoid undefined reference error if CONFIG_OF is used to selectively compile in or out the data structure. It is defined as follows: #ifdef CONFIG_OF #define of_match_ptr(ptr) ptr #else #define of_match_ptr(ptr) NULL #endif In the case of this series, none of the drivers use CONFIG_OF macro to compile out the data structure (i.e., the data structure is always defined). Hence the use of of_match_ptr() does not make any sense. Thus removing it to make the code look simpler for readability. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: ts72xx_wdt: cleanup return codes in ioctlDan Carpenter2013-11-171-20/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There seems to be some confusion here which functions return positive numbers and which return negative error codes. copy_to_user() returns the number of bytes remaining to be copied but we want to return -EFAULT. The rest is just clean up. get_user() actually returns zero on success and -EFAULT on error so we can preserve the error code. The timeout_to_regval() function returns -EINVAL on failure, but we can propogate that back instead of hardcoding -EINVAL ourselves. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> --
| * documentation/devicetree: Move DT bindings from gpio to watchdogJohannes Thumshirn2013-11-171-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I accidently put the devicetree bindings for the MEN A21 watchdog driver in Documentation/devicetree/bindings/gpio instead of Documentation/devicetree/bindings/watchdog, this patch addresses this error. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Rob Landley <rob@landley.net>
| * watchdog: add ralink watchdog driverJohn Crispin2013-11-174-0/+235
| | | | | | | | | | | | | | | | | | | | | | | | Add a driver for the watchdog timer found on Ralink SoC Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org
| * watchdog: Add MOXA ART watchdog driverJonas Jensen2013-11-174-0/+191
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a watchdog driver for the main hardware watchdog timer found on MOXA ART SoCs. The MOXA ART SoC provides one writable timer register, restarting the hardware once it reaches zero. The register is auto decremented every APB clock cycle. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: kempld_wdt: Add __user annotationJingoo Han2013-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added __user annotation to fix the following sparse warnings. Also, it makes 'kempld_prescaler' static because it is used only in this file. drivers/watchdog/kempld_wdt.c:70:11: warning: symbol 'kempld_prescaler' was not declared. Should it be static? drivers/watchdog/kempld_wdt.c:364:23: warning: incorrect type in initializer (different address spaces) drivers/watchdog/kempld_wdt.c:364:23: expected int const [noderef] <asn:1>*register __p drivers/watchdog/kempld_wdt.c:364:23: got int *<noident> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: dw_wdt: Add __user annotationJingoo Han2013-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added __user annotation to fix the following sparse warnings. drivers/watchdog/dw_wdt.c:206:38: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/dw_wdt.c:206:38: expected void [noderef] <asn:1>*to drivers/watchdog/dw_wdt.c:206:38: got struct watchdog_info *<noident> drivers/watchdog/dw_wdt.c:211:24: warning: incorrect type in initializer (different address spaces) drivers/watchdog/dw_wdt.c:211:24: expected int const [noderef] <asn:1>*register __p drivers/watchdog/dw_wdt.c:211:24: got int *<noident> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: use dev_get_platdata()Jingoo Han2013-11-177-12/+10
| | | | | | | | | | | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imx2_wdt: expose module alias for loading from device-treeNiels de Vos2013-11-171-0/+1
| | | | | | | | | | | | | | | | | | Enable auto loading by udev when imx2_wdt is compiled as a module. Signed-off-by: Niels de Vos <ndevos@redhat.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: dw_wdt: use clk_prepare_enable and clk_disable_unprepareHeiko Stübner2013-11-171-5/+5
| | | | | | | | | | | | | | | | | | This is necessary to make the driver work with platforms using the common clock framework. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: dw_wdt: convert to SIMPLE_DEV_PM_OPSHeiko Stübner2013-11-171-8/+3
| | | | | | | | | | | | | | | | | | | | The dw_wdt only provides PM_SLEEP operations, so convert the driver to use SIMPLE_DEV_PM_OPS instead of populating the struct manually. This has the added effect of simplifying the CONFIG_PM ifdefs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge branch 'i2c/for-next' of ↵Linus Torvalds2013-11-1866-241/+3108
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
| * | i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()Wei Yongjun2013-11-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the bus speed parse error handling case instead of 0. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i2c-eg20t: do not print error message in syslog if no ACK receivedAndreas Werner2013-11-171-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using the i2c-eg20t driver and call i2cdetect or probe on the bus, the driver will print a lot of error messages if there was no ACK received. i2cdetect normally print a table with all the available devices. If there is no device on the address, the table will be empty. Currently with the i2c-eg20t driver, the table is not visible because the error messages destroy the table. Error message: pch_i2c_getack return -71 This patch prevent the driver to print the messages to syslog. The pch_i2c_wait_for_check_xfer function is the only one who is calling pch_i2c_getack, so we can delete the function and add the read to pch_i2c_wait_for_check_xfer. If no ACK is received, the Message will be printed as a dbg message. Fixed print message to be a one liner so we can grep for the error message. Tested on Intel Atom E6xx and Eg20t Chipset. Signed-off-by: Andreas Werner <wernerandy@gmx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: bcm-kona: Introduce Broadcom I2C DriverTim Kryger2013-11-154-0/+954
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce support for Broadcom Serial Controller (BSC) I2C bus found in the Kona family of Mobile SoCs. FIFO hardware is utilized but only standard mode (100kHz), fast mode (400kHz), fast mode plus (1MHz), and I2C high-speed (3.4 MHz) bus speeds are supported. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> [wsa: fixed Kconfig sorting, squashed broken out patches into one] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
OpenPOWER on IntegriCloud