summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* gpiolib: better rmmod infrastructureGuennadi Liakhovetski2008-04-282-3/+14
| | | | | | | | | | | | | | | | | As long as one or more GPIOs on a gpio chip are used its driver should not be unloaded. The existing mechanism (gpiochip_remove failure) doesn't address that, since rmmod can no longer be made to fail by having the cleanup code report errors. Module usecounts are the solution. Assuming standard "initialize struct to zero" policies, this change won't affect SOC platform drivers. However, drivers for external chips (on I2C and SPI busses) should be updated if they can be built as modules. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> [ gpio_ensure_requested() needs to update module usecounts too ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* i2o: remove static inline forward declarationsIlpo Järvinen2008-04-281-5/+0
| | | | | | | | | Nothing in between of them and the later declaration with body needs them. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* isdn: rename CONFIG_AVMB1_COMPAT to not look like a Kconfig variableRobert P. J. Day2008-04-281-4/+4
| | | | | | | | | | Since CONFIG_AVMB1_COMPAT is not a Kconfig variable, move it out of the Kconfig namespace. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* capifs: fix memory leak on remountCyrill Gorcunov2008-04-281-0/+1
| | | | | | | | | | capifs_remount may reach 'return' statement without freeing of memory allocated by kstrdup call Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hisax: depend on CONFIG_PNP, not __ISAPNP__Bjorn Helgaas2008-04-281-4/+6
| | | | | | | | | | The PNP driver interfaces depend on CONFIG_PNP, so test that rather than __ISAPNP__. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* isdn: fix obvious cut-and-paste error in st5481_usb.cRobert P. J. Day2008-04-281-1/+1
| | | | | | | | | | Fix a rather obvious cut-and-paste error, where earlier code for the controller URB got somehow mixed in with code for the interrupt URB. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* isdn: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-2822-51/+51
| | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* eicon: fix sparse integer as NULL pointer warningsHarvey Harrison2008-04-282-7/+7
| | | | | | | | | | | | | | | drivers/isdn/hardware/eicon/message.c:745:47: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:761:45: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9122:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9147:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9173:14: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/divasmain.c:396:23: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* avm: fix sparse warning using integer as NULL pointerHarvey Harrison2008-04-288-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/isdn/hardware/avm/b1isa.c:206:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1isa.c:208:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:664:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:666:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:668:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:791:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:793:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pci.c:385:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pci.c:387:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:886:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:888:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:890:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:973:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:975:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pcmcia.c:204:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pcmcia.c:206:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1isa.c:554:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1isa.c:556:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1pci.c:236:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1pci.c:238:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1091:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1093:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1095:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1170:21: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1294:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1296:33: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* capi: fix sparse warnings using integer as NULL pointerHarvey Harrison2008-04-286-38/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/isdn/capi/kcapi.c:829:30: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:838:27: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:954:17: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:1007:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:1009:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capiutil.c:453:24: warning: Using plain integer as NULL pointer drivers/isdn/capi/capilib.c:47:30: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:353:29: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:369:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:486:48: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:515:46: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:541:47: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:692:47: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:699:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:704:14: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:943:53: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:948:32: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:969:42: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:989:48: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1026:69: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1028:19: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1061:20: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1529:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1531:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:338:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:758:32: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:880:40: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:407:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:407:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:444:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:1664:61: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:1969:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2294:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2297:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2338:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2341:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capifs.c:192:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capifs.c:194:33: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: convert stub functions from macros into inlinesAndrew Morton2008-04-281-8/+37
| | | | | | | | | | | | | | Fixes things like this: fs/super.c: In function `deactivate_super': fs/super.c:182: warning: statement with no effect fs/super.c: In function `do_remount_sb': fs/super.c:644: warning: statement with no effect Cc: Jan Kara <jack@ucw.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: reiserfs: make reiserfs handle quotaon on remountJan Kara2008-04-281-5/+8
| | | | | | | | Update reiserfs to handle quotaon on remount RW. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: ext4: make ext4 handle quotaon on remountJan Kara2008-04-281-7/+8
| | | | | | | | | Update ext4 to handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: ext3: make ext3 handle quotaon on remountJan Kara2008-04-281-9/+10
| | | | | | | | | Update ext3 handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: quota core changes for quotaon on remountJan Kara2008-04-285-22/+113
| | | | | | | | | | | | | Currently, we just turn quotas off on remount of filesystem to read-only state. The patch below adds necessary framework so that we can turn quotas off on remount RO but we are able to automatically reenable them again when filesystem is remounted to RW state. All we need to do is to keep references to inodes of quota files when remounting RO and using these references to reenable quotas when remounting RW. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: various style cleanupsJan Kara2008-04-284-28/+60
| | | | | | | | | | | | | | Cleanups in quota code: Change __inline__ to inline. Change some macros to inline functions. Remove vfs_quota_off_mount() macro. DQUOT_OFF() should be (0) is CONFIG_QUOTA is disabled. Move declaration of mark_dquot_dirty and dirty_dquot from quota.h to dquot.c [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: remove superfluous DQUOT_OFF() in fs/namespace.cJan Kara2008-04-281-2/+0
| | | | | | | | | We don't need to turn quotas off before remounting root ro, because do_remount_sb() already handles this. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* quota: do not allow setting of quota limits to too high valuesAndrew Perepechko2008-04-284-5/+25
| | | | | | | | | | We should check whether quota limits set via Q_SETQUOTA are not exceeding limits which quota format is able to handle. Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kprobes: update document about batch registrationMasami Hiramatsu2008-04-281-4/+47
| | | | | | | | | | | | | | | Add the description of batch registration interfaces to Documentation/kprobes.txt. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kprobes: add (un)register_jprobes for batch registrationMasami Hiramatsu2008-04-282-9/+65
| | | | | | | | | | | | | | Introduce unregister_/register_jprobes() for jprobe batch registration. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kprobes: add (un)register_kretprobes for batch registrationMasami Hiramatsu2008-04-282-20/+97
| | | | | | | | | | | | | | Introduce unregister_/register_kretprobes() for kretprobe batch registration. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kprobes: add (un)register_kprobes for batch registrationMasami Hiramatsu2008-04-282-37/+96
| | | | | | | | | | | | | | | | Introduce unregister_/register_kprobes() for kprobe batch registration. This can reduce waiting time for synchronized_sched() when a lot of probes have to be unregistered at once. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* list.h: add list_is_singular()Masami Hiramatsu2008-04-281-0/+9
| | | | | | | | | | | | Add list_is_singular() to check a list has just one entry. list_is_singular() is useful to check whether a list_head which have been temporarily allocated for listing objects can be released or not. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kprobes: prevent probing of preempt_schedule()Srinivasa Ds2008-04-282-0/+59
| | | | | | | | | | | | | | | | | | | | | | Prohibit users from probing preempt_schedule(). One way of prohibiting the user from probing functions is by marking such functions with __kprobes. But this method doesn't work for those functions, which are already marked to different section like preempt_schedule() (belongs to __sched section). So we use blacklist approach to refuse user from probing these functions. In blacklist approach we populate the blacklisted function's starting address and its size in kprobe_blacklist structure. Then we verify the user specified address against start and end of the blacklisted function. So any attempt to register probe on blacklisted functions will be rejected. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* VT notifier extension for accessibilityKarl Dahlke2008-04-282-0/+9
| | | | | | | | | | Some accessibility modules need to be able to catch the output on the console before the VT interpretation, and possibly swallow it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd: use shorter set_current_state()Robert P. J. Day2008-04-281-4/+3
| | | | | | | | | | | | Since this routine declares a separate "tsk" pointer for no other reason than to call set_task_state(), get rid of it and just invoke set_current_state(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sm501: add uart supportMagnus Damm2008-04-282-16/+69
| | | | | | | | | | | | This patch extends the sm501 mfd with 8250 uart support. We're currently doing this in the board specific r2d-1 code already, but it would be nice to do move things into the mfd since it's more chip specific than board specific. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: spi_imx updatesAndrea Paterniani2008-04-281-109/+114
| | | | | | | | | | | | | | | | | | | | | | | | Updates to the i.MX SPI controller driver: 1) Some comments changed and/or added. 2) End of transfers is now managed on TXFIFO empty interrupt after the last write to TXFIFO. This speeds interrupt execution by removing the wait for TXFIFO to become empty. On TXFIFO empty interrupt the handler needs only to poll for the end of the ongoing transaction (SPI_CONTROL_XCH) to close the transfer. (2.1) Write only transfers are closed flushing RXFIFO. (2.2) Read transfers are closed reading trailing bytes from RXFIFO. (2.3) Read transfers where RXFIFO overrun occurred are closed by flushing RXFIFO and aborting the message. 3) Fifos are now flushed via SPI disable after the end of ongoing transaction. Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_spi: support zero length transferAtsushi Nemoto2008-04-281-1/+1
| | | | | | | | | | | | A spi transfer with zero length is not invalid. For example, such transfer (len == 0 && delay_usecs != 0) can be used to achieve delay before first CLK edge after chipselect assertion. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-285-9/+9
| | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* documentation: move spidev_fdx example to its own source fileRandy Dunlap2008-04-282-166/+160
| | | | | | | | | | | | Move sample source code to its own source file so that it can be used easier and build-tested/check/maintained by anyone. (Makefile changes are in a separate patch for all of Documentation/.) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: pxa2xx_spi "sparse" fixesDavid Brownell2008-04-281-24/+28
| | | | | | | | | | | | Various cleanups to pxa2xx_spi suggested by "sparse": make sure that register addresess are "void __iomem *", and make a few functions properly static. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ned Forrester <nforrester@whoi.edu> Cc: Stephen Street <stephen@streetfiresound.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* spi: use menuconfig for CONFIG_SPIAlessandro Guido2008-04-281-7/+6
| | | | | | | Signed-off-by: Alessandro Guido <alessandro.guido@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* oprofile: change cpu_buffer from array to per_cpu variableMike Travis2008-04-284-12/+13
| | | | | | | | | | Change cpu_buffer from array to per_cpu variable in oprofile functions. [akpm@linux-foundation.org: coding-style fixes] Cc: Philippe Elie <phil.el@wanadoo.fr> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86: configurable DMI scanning codeThomas Petazzoni2008-04-282-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Turn CONFIG_DMI into a selectable option if EMBEDDED is defined, in order to be able to remove the DMI table scanning code if it's not needed, and then reduce the kernel code size. With CONFIG_DMI (i.e before) : text data bss dec hex filename 1076076 128656 98304 1303036 13e1fc vmlinux Without CONFIG_DMI (i.e after) : text data bss dec hex filename 1068092 126308 98304 1292704 13b9a0 vmlinux Result: text data bss dec hex filename -7984 -2348 0 -10332 -285c vmlinux The new option appears in "Processor type and features", only when CONFIG_EMBEDDED is defined. This patch is part of the Linux Tiny project, and is based on previous work done by Matt Mackall <mpm@selenic.com>. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Anvin" <hpa@zytor.com> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/acpi/thermal.c: fix build with CONFIG_DMI=nAndrew Morton2008-04-281-2/+0
| | | | | | | | | | drivers/acpi/thermal.c: In function 'acpi_thermal_init': drivers/acpi/thermal.c:1794: error: 'thermal_dmi_table' undeclared (first use in this function) drivers/acpi/thermal.c:1794: error: (Each undeclared identifier is reported only once drivers/acpi/thermal.c:1794: error: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: remove duplicated macro definitionMichael Trimarchi2008-04-281-1/+0
| | | | | | | | | | | After commit 39d4c922b596633da86878b1a5cc881785b8e5fa (atmel_serial: fix uart/console concurrent access) the UART_GET_TCR macro got redefined. This patch removes the duplicated definition. Signed-off-by: michael trimarchi <trimarchimichael@evidence.eu.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: use time_before, time_before_eq, etcJulia Lawall2008-04-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial 8250: tighten test for using backup timerAlex Williamson2008-04-281-2/+3
| | | | | | | | | | | | | | | | | | | | Thomas Koeller had reported an issue where a device that had been making use of the UART_BUG_TXEN code in the 8250 driver was mistakenly being caught by the backup timer test, causing the device to work improperly. To fix this, tighten the test requirements to enable the backup timer workaround. The backup timer is really meant to catch UARTs that don't re-assert the THRE interrupt. The expectation is that they do initially assert THRE. This patch clarifies the test. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Cc: Thomas Koeller <thomas@koeller.dyndns.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: add VR41xx SIU setup for serial consoleYoichi Yuasa2008-04-284-4/+52
| | | | | | | | | Add VR41xx SIU setup for serial console. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: add vr41xx_siu_early_setup() for serial consoleYoichi Yuasa2008-04-281-1/+14
| | | | | | | | | Add vr41xx_siu_early_setup() for serial console. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uart_get_baud_rate: stop mangling termiosAlan Cox2008-04-281-4/+11
| | | | | | | | | | | | Russell King noticed this one: We have to avoid replacing B0 when we pick a baud rate for a "hung up" port. Ugly but the proper fix is in the tty layer and means changing the tty<->serial interfaces so we will defer that for now. [akpm@linux-foundation.org: fix uninitialised var] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix tty speed handling on 8250Alan Cox2008-04-281-1/+3
| | | | | | | | | | | We try and write the correct speed back but the serial midlayer already mangles the speed on us and that means if we request B0 we report back B9600 when we should not. For now we'll hack around this in the drivers and serial code, pending a better long term solution. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* char: make functions static in synclinkmp.cHarvey Harrison2008-04-281-60/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All were forward declared with static. Fixes sparse warnings: drivers/char/synclinkmp.c:1476:5: warning: symbol 'read_proc' was not declared. Should it be static? drivers/char/synclinkmp.c:2027:5: warning: symbol 'bh_action' was not declared. Should it be static? drivers/char/synclinkmp.c:2058:6: warning: symbol 'bh_handler' was not declared. Should it be static? drivers/char/synclinkmp.c:2103:6: warning: symbol 'bh_receive' was not declared. Should it be static? drivers/char/synclinkmp.c:2112:6: warning: symbol 'bh_transmit' was not declared. Should it be static? drivers/char/synclinkmp.c:2124:6: warning: symbol 'bh_status' was not declared. Should it be static? drivers/char/synclinkmp.c:2136:6: warning: symbol 'isr_timer' was not declared. Should it be static? drivers/char/synclinkmp.c:2162:6: warning: symbol 'isr_rxint' was not declared. Should it be static? drivers/char/synclinkmp.c:2221:6: warning: symbol 'isr_rxrdy' was not declared. Should it be static? drivers/char/synclinkmp.c:2351:6: warning: symbol 'isr_txint' was not declared. Should it be static? drivers/char/synclinkmp.c:2379:6: warning: symbol 'isr_txrdy' was not declared. Should it be static? drivers/char/synclinkmp.c:2410:6: warning: symbol 'isr_rxdmaok' was not declared. Should it be static? drivers/char/synclinkmp.c:2427:6: warning: symbol 'isr_rxdmaerror' was not declared. Should it be static? drivers/char/synclinkmp.c:2445:6: warning: symbol 'isr_txdmaok' was not declared. Should it be static? drivers/char/synclinkmp.c:2463:6: warning: symbol 'isr_txdmaerror' was not declared. Should it be static? drivers/char/synclinkmp.c:2480:6: warning: symbol 'isr_io_pin' was not declared. Should it be static? drivers/char/synclinkmp.c:3420:5: warning: symbol 'alloc_dma_bufs' was not declared. Should it be static? drivers/char/synclinkmp.c:3494:5: warning: symbol 'alloc_buf_list' was not declared. Should it be static? drivers/char/synclinkmp.c:3553:5: warning: symbol 'alloc_frame_bufs' was not declared. Should it be static? drivers/char/synclinkmp.c:3570:6: warning: symbol 'free_dma_bufs' was not declared. Should it be static? drivers/char/synclinkmp.c:3580:5: warning: symbol 'alloc_tmp_rx_buf' was not declared. Should it be static? drivers/char/synclinkmp.c:3588:6: warning: symbol 'free_tmp_rx_buf' was not declared. Should it be static? drivers/char/synclinkmp.c:3594:5: warning: symbol 'claim_resources' was not declared. Should it be static? drivers/char/synclinkmp.c:3681:6: warning: symbol 'release_resources' was not declared. Should it be static? drivers/char/synclinkmp.c:3737:6: warning: symbol 'add_device' was not declared. Should it be static? drivers/char/synclinkmp.c:3860:6: warning: symbol 'device_init' was not declared. Should it be static? drivers/char/synclinkmp.c:4054:6: warning: symbol 'enable_loopback' was not declared. Should it be static? drivers/char/synclinkmp.c:4101:6: warning: symbol 'set_rate' was not declared. Should it be static? drivers/char/synclinkmp.c:4147:6: warning: symbol 'rx_stop' was not declared. Should it be static? drivers/char/synclinkmp.c:4168:6: warning: symbol 'rx_start' was not declared. Should it be static? drivers/char/synclinkmp.c:4225:6: warning: symbol 'tx_start' was not declared. Should it be static? drivers/char/synclinkmp.c:4295:6: warning: symbol 'tx_stop' was not declared. Should it be static? drivers/char/synclinkmp.c:4322:6: warning: symbol 'tx_load_fifo' was not declared. Should it be static? drivers/char/synclinkmp.c:4371:6: warning: symbol 'reset_port' was not declared. Should it be static? drivers/char/synclinkmp.c:4395:6: warning: symbol 'reset_adapter' was not declared. Should it be static? drivers/char/synclinkmp.c:4407:6: warning: symbol 'async_mode' was not declared. Should it be static? drivers/char/synclinkmp.c:4546:6: warning: symbol 'hdlc_mode' was not declared. Should it be static? drivers/char/synclinkmp.c:4748:6: warning: symbol 'tx_set_idle' was not declared. Should it be static? drivers/char/synclinkmp.c:4768:6: warning: symbol 'get_signals' was not declared. Should it be static? drivers/char/synclinkmp.c:4797:6: warning: symbol 'set_signals' was not declared. Should it be static? drivers/char/synclinkmp.c:4826:6: warning: symbol 'rx_reset_buffers' was not declared. Should it be static? drivers/char/synclinkmp.c:4837:6: warning: symbol 'rx_free_frame_buffers' was not declared. Should it be static? drivers/char/synclinkmp.c:4865:5: warning: symbol 'rx_get_frame' was not declared. Should it be static? drivers/char/synclinkmp.c:5040:6: warning: symbol 'tx_load_dma_buffer' was not declared. Should it be static? drivers/char/synclinkmp.c:5080:5: warning: symbol 'register_test' was not declared. Should it be static? drivers/char/synclinkmp.c:5119:5: warning: symbol 'irq_test' was not declared. Should it be static? drivers/char/synclinkmp.c:5211:5: warning: symbol 'init_adapter' was not declared. Should it be static? drivers/char/synclinkmp.c:5270:5: warning: symbol 'loopback_test' was not declared. Should it be static? drivers/char/synclinkmp.c:5335:5: warning: symbol 'adapter_test' was not declared. Should it be static? drivers/char/synclinkmp.c:5397:5: warning: symbol 'memory_test' was not declared. Should it be static? drivers/char/synclinkmp.c:5449:6: warning: symbol 'load_pci_memory' was not declared. Should it be static? drivers/char/synclinkmp.c:5468:6: warning: symbol 'trace_block' was not declared. Should it be static? drivers/char/synclinkmp.c:5503:6: warning: symbol 'tx_timeout' was not declared. Should it be static? drivers/char/synclinkmp.c:5530:6: warning: symbol 'status_timeout' was not declared. Should it be static? drivers/char/synclinkmp.c:5581:15: warning: symbol 'read_reg' was not declared. Should it be static? drivers/char/synclinkmp.c:5586:6: warning: symbol 'write_reg' was not declared. Should it be static? drivers/char/synclinkmp.c:5592:5: warning: symbol 'read_reg16' was not declared. Should it be static? drivers/char/synclinkmp.c:5598:6: warning: symbol 'write_reg16' was not declared. Should it be static? drivers/char/synclinkmp.c:5604:15: warning: symbol 'read_status_reg' was not declared. Should it be static? drivers/char/synclinkmp.c:5610:6: warning: symbol 'write_control_reg' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* synclink drivers bool conversionJoe Perches2008-04-285-327/+319
| | | | | | | | | | | | Remove more TRUE/FALSE defines and uses Remove == TRUE tests Convert BOOLEAN to bool Convert int to bool where appropriate Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: silence section mismatch warnings in 8250_pciSam Ravnborg2008-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Fix following warnings: WARNING: drivers/serial/built-in.o(.data+0x5b8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_ite887x_exit() WARNING: drivers/serial/built-in.o(.data+0x5e0): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x608): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x658): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x680): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x6a8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x6d0): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() WARNING: drivers/serial/built-in.o(.data+0x6f8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() WARNING: drivers/serial/built-in.o(.data+0x720): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() WARNING: drivers/serial/built-in.o(.data+0x748): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() pci_serial_quirks contains a number of function pointers where the referenced function is annotated __devexit. This is OK so we annotate pci_serial_quirks with __refdata to ignore the __devexit references Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ncpfs: fix sparse warning in ncpsign_kernel.cHarvey Harrison2008-04-281-1/+1
| | | | | | | | | | | | | | We're casting anyway, might as well cast to the correct sign. Specific to i386 (ifdef __i386__) fs/ncpfs/ncpsign_kernel.c:58:23: warning: incorrect type in initializer (different signedness) fs/ncpfs/ncpsign_kernel.c:58:23: expected unsigned int *data2 fs/ncpfs/ncpsign_kernel.c:58:23: got int *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ncpfs: fix sparse warnings in ioctl.cHarvey Harrison2008-04-281-9/+8
| | | | | | | | | | | | | | | | | | In both cases, these inode variables arebeing used to test the server's root inode against NULL. Change them to s_inode. fs/ncpfs/ioctl.c:391:18: warning: symbol 'inode' shadows an earlier one fs/ncpfs/ioctl.c:264:28: originally declared here fs/ncpfs/ioctl.c:441:17: warning: symbol 'inode' shadows an earlier one fs/ncpfs/ioctl.c:264:28: originally declared here In this case, we are about to return anyway, just reuse result. fs/ncpfs/ioctl.c:521:8: warning: symbol 'result' shadows an earlier one fs/ncpfs/ioctl.c:268:6: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ncpfs: add prototypes to ncp_fs.hHarvey Harrison2008-04-282-6/+7
| | | | | | | | | | | | Removes some externs from C files, noticed from the sparse warnings: fs/ncpfs/dir.c:90:26: warning: symbol 'ncp_root_dentry_operations' was not declared. Should it be static? fs/ncpfs/symlink.c:107:5: warning: symbol 'ncp_symlink' was not declared. Should it be static? fs/ncpfs/symlink.c:101:39: warning: symbol 'ncp_symlink_aops' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: clean up arch/um/drivers/ubd_kern.cWANG Cong2008-04-281-195/+190
| | | | | | | | | | | | | Make some global functions and variables static. And remove some useless declarations for local functions, since we just need to move their definitions ahead. [jdike@addtoit.com: checkpatch cleanups] Signed-off-by: WANG Cong <wangcong@zeuux.org> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud