summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tx4938ide: Check minimum cycle time and SHWT range (v2)Atsushi Nemoto2008-11-021-1/+8
| | | | | | | | | | | | | | SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx release to address invalid hold time, so it actualy applies 4 times and so constitutes -DIOx recovery time. Check requirement of the recovery time and cycle time. Also check SHWT maximum value. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: Switch to a common addressAlan Cox2008-11-0211-11/+11
| | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-cd: fix DMA alignment regressionBorislav Petkov2008-11-021-1/+2
| | | | | | | | | | | | | | | | e5318b531b008c79d2a0c0df06a7b8628da38e2f ("ide: use the dma safe check for REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading performance and ultimately causing an excessive amount of underruns. The issue is documented also in: http://bugzilla.kernel.org/show_bug.cgi?id=11742. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Valerio Passini <valerio.passini@unicam.it> [bart: fixup patch description per comments from Sergei Shtylyov] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds2008-10-301-0/+7
|\ | | | | | | | | * 'for-linus' of git://neil.brown.name/md: md: destroy partitions and notify udev when md array is stopped.
| * md: destroy partitions and notify udev when md array is stopped.NeilBrown2008-10-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md arrays are not currently destroyed when they are stopped - they remain in /sys/block. Last time I tried this I tripped over locking too much. A consequence of this is that udev doesn't remove anything from /dev. This is rather ugly. As an interim measure until proper device removal can be achieved, make sure all partitions are removed using the BLKRRPART ioctl, and send a KOBJ_CHANGE when an md array is stopped. Signed-off-by: NeilBrown <neilb@suse.de>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2008-10-303-14/+22
|\ \ | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: fix irq vectors. lguest: fix early_ioremap. lguest: fix example launcher compile after moved asm-x86 dir.
| * | lguest: fix irq vectors.Rusty Russell2008-10-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | do_IRQ: cannot handle IRQ -1 vector 0x20 cpu 0 ------------[ cut here ]------------ kernel BUG at arch/x86/kernel/irq_32.c:219! We're not ISA: we have a 1:1 mapping from vectors to irqs. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | lguest: fix early_ioremap.Rusty Russell2008-10-311-12/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dmi_scan_machine breaks under lguest: lguest: unhandled trap 14 at 0xc04edeae (0xffa00000) This is because we use current_cr3 for the read_cr3() paravirt function, and it isn't set until the first cr3 change. We got away with it until this happened. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | lguest: fix example launcher compile after moved asm-x86 dir.Rusty Russell2008-10-312-2/+2
| | | | | | | | | | | | Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | | Merge branch 'x86-fixes-for-linus-2' of ↵Linus Torvalds2008-10-3014-40/+85
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_index build fix x86/voyager: fix missing cpu_index initialisation x86/voyager: fix compile breakage caused by dc1e35c6e95e8923cf1d3510438b63c600fee1e2 x86: fix /dev/mem mmap breakage when PAT is disabled x86/voyager: fix compile breakage casued by x86: move prefill_possible_map calling early x86: use CONFIG_X86_SMP instead of CONFIG_SMP x86/voyager: fix boot breakage caused by x86: boot secondary cpus through initial_code x86, uv: fix compile error in uv_hub.h i386/PAE: fix pud_page() x86: remove debug code from arch_add_memory() x86: start annotating early ioremap pointers with __iomem x86: two trivial sparse annotations x86: fix init_memory_mapping for [dc000000 - e0000000) - v2
| * | | x86: cpu_index build fixIngo Molnar2008-10-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix: arch/x86/kernel/cpu/common.c: In function 'early_identify_cpu': arch/x86/kernel/cpu/common.c:553: error: 'struct cpuinfo_x86' has no member named 'cpu_index' as cpu_index is only available on SMP. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86/voyager: fix missing cpu_index initialisationJames Bottomley2008-10-312-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix /proc/cpuinfo output on x86/Voyager Ever since | commit 92cb7612aee39642d109b8d935ad265e602c0563 | Author: Mike Travis <travis@sgi.com> | Date: Fri Oct 19 20:35:04 2007 +0200 | | x86: convert cpuinfo_x86 array to a per_cpu array We've had an extra field in cpuinfo_x86 which is cpu_index. Unfortunately, voyager has never initialised this, although the only noticeable impact seems to be that /proc/cpuinfo shows all zeros for the processor ids. Anyway, fix this by initialising the boot CPU properly and setting the index when the secondaries update. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86/voyager: fix compile breakage caused by ↵James Bottomley2008-10-313-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dc1e35c6e95e8923cf1d3510438b63c600fee1e2 Impact: build fix on x86/Voyager Given commits like this: | Author: Suresh Siddha <suresh.b.siddha@intel.com> | Date: Tue Jul 29 10:29:19 2008 -0700 | | x86, xsave: enable xsave/xrstor on cpus with xsave support Which deliberately expose boot cpu dependence to pieces of the system, I think it's time to explicitly have a variable for it to prevent this continual misassumption that the boot CPU is zero. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: fix /dev/mem mmap breakage when PAT is disabledRavikiran G Thirumalai2008-10-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: allow /dev/mem mmaps on non-PAT CPUs/platforms Fix mmap to /dev/mem when CONFIG_X86_PAT is off and CONFIG_STRICT_DEVMEM is off mmap to /dev/mem on kernel memory has been failing since the introduction of PAT (CONFIG_STRICT_DEVMEM=n case). Seems like the check to avoid cache aliasing with PAT is kicking in even when PAT is disabled. The bug seems to have crept in 2.6.26. This patch makes sure that the mmap to regular kernel memory succeeds if CONFIG_STRICT_DEVMEM=n and PAT is disabled, and the checks to avoid cache aliasing still happens if PAT is enabled. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Tested-by: Tim Sirianni <tim@scalemp.com> Cc: <stable@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86/voyager: fix compile breakage casued by x86: move prefill_possible_map ↵James Bottomley2008-10-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | calling early Impact: fix build failure on x86/Voyager Before: | commit 329513a35d1a2b6b28d54f5c2c0dde4face8200b | Author: Yinghai Lu <yhlu.kernel@gmail.com> | Date: Wed Jul 2 18:54:40 2008 -0700 | | x86: move prefill_possible_map calling early prefill_possible_mask() was hidden under CONFIG_HOTPLUG_CPU rendering it invisitble to voyager. Since this commit it's exposed, but not provided by the voyager subarch, so add a dummy stub to fix the link breakage. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: use CONFIG_X86_SMP instead of CONFIG_SMPJames Bottomley2008-10-302-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix x86/Voyager boot CONFIG_SMP is used for features which work on *all* x86 boxes. CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like multi core and apics) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86/voyager: fix boot breakage caused by x86: boot secondary cpus through ↵James Bottomley2008-10-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | initial_code Impact: boot up secondary CPUs as well on x86/Voyager systems This commit: | commit 3e9704739daf46a8ba6593d749c67b5f7cd633d2 | Author: Glauber Costa <gcosta@redhat.com> | Date: Wed May 28 13:01:54 2008 -0300 | | x86: boot secondary cpus through initial_code removed the use of initialize_secondary. However, it didn't update voyager, so the secondary cpus no longer boot. Fix this by adding the initial_code switch to voyager as well. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86, uv: fix compile error in uv_hub.hMike Travis2008-10-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: include file dependency cleanup Fix compile errors of files that include asm/uv/uv_hub.h but do not include linux/timer.h. [ such files are not mainline right now. ] Signed-of-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | i386/PAE: fix pud_page()Jan Beulich2008-10-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup To the unsuspecting user it is quite annoying that this broken and inconsistent with x86-64 definition still exists. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: remove debug code from arch_add_memory()Gary Hade2008-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: remove incorrect WARN_ON(1) Gets rid of dmesg spam created during physical memory hot-add which will very likely confuse users. The change removes what appears to be debugging code which I assume was unintentionally included in: x86: arch/x86/mm/init_64.c printk fixes commit 10f22dde556d1ed41d55355d1fb8ad495f9810c8 Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: start annotating early ioremap pointers with __iomemHarvey Harrison2008-10-292-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: some new sparse warnings in e820.c etc, but no functional change. As with regular ioremap, iounmap etc, annotate with __iomem. Fixes the following sparse warnings, will produce some new ones elsewhere in arch/x86 that will get worked out over time. arch/x86/mm/ioremap.c:402:9: warning: cast removes address space of expression arch/x86/mm/ioremap.c:406:10: warning: cast adds address space to expression (<asn:2>) arch/x86/mm/ioremap.c:782:19: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: two trivial sparse annotationsHarvey Harrison2008-10-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fewer sparse warnings, no functional changes arch/x86/kernel/vsmp_64.c:87:14: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:87:14: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:87:14: got void *[assigned] address arch/x86/kernel/vsmp_64.c:88:22: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:88:22: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:88:22: got void * arch/x86/kernel/vsmp_64.c:100:23: warning: incorrect type in argument 2 (different address spaces) arch/x86/kernel/vsmp_64.c:100:23: expected void volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:100:23: got void * arch/x86/kernel/vsmp_64.c:101:23: warning: incorrect type in argument 1 (different address spaces) arch/x86/kernel/vsmp_64.c:101:23: expected void const volatile [noderef] <asn:2>*addr arch/x86/kernel/vsmp_64.c:101:23: got void * arch/x86/mm/gup.c:235:6: warning: incorrect type in argument 1 (different base types) arch/x86/mm/gup.c:235:6: expected void const volatile [noderef] <asn:1>*<noident> arch/x86/mm/gup.c:235:6: got unsigned long [unsigned] [assigned] start Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | x86: fix init_memory_mapping for [dc000000 - e0000000) - v2Yinghai Lu2008-10-281-17/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: change over-mapping to precise mapping, fix /proc/meminfo output v2: fix less than 1G ram system handling when gart aperture is 0xdc000000 - 0xe0000000 it return 0xc0000000 - 0xe0000000 that is not right. this patch fix that will get exact mapping on 256g sytem with that aperture after patch LBSuse:~ # cat /proc/meminfo MemTotal: 264742432 kB MemFree: 263920628 kB Buffers: 1416 kB Cached: 24468 kB ... DirectMap4k: 5760 kB DirectMap2M: 3205120 kB DirectMap1G: 265289728 kB it is consistent to LBSuse:~ # cat /sys/kernel/debug/kernel_page_tables .. ---[ Low Kernel Mapping ]--- 0xffff880000000000-0xffff880000200000 2M RW GLB x pte 0xffff880000200000-0xffff880040000000 1022M RW PSE GLB x pmd 0xffff880040000000-0xffff8800c0000000 2G RW PSE GLB NX pud 0xffff8800c0000000-0xffff8800d7e00000 382M RW PSE GLB NX pmd 0xffff8800d7e00000-0xffff8800d7fa0000 1664K RW GLB NX pte 0xffff8800d7fa0000-0xffff8800d8000000 384K pte 0xffff8800d8000000-0xffff8800dc000000 64M pmd 0xffff8800dc000000-0xffff8800e0000000 64M RW PSE GLB NX pmd 0xffff8800e0000000-0xffff880100000000 512M pmd 0xffff880100000000-0xffff880800000000 28G RW PSE GLB NX pud 0xffff880800000000-0xffff880824600000 582M RW PSE GLB NX pmd 0xffff880824600000-0xffff8808247f0000 1984K RW GLB NX pte 0xffff8808247f0000-0xffff880824800000 64K RW PCD GLB NX pte 0xffff880824800000-0xffff880840000000 440M RW PSE GLB NX pmd 0xffff880840000000-0xffff884000000000 223G RW PSE GLB NX pud 0xffff884000000000-0xffff884028000000 640M RW PSE GLB NX pmd 0xffff884028000000-0xffff884040000000 384M pmd 0xffff884040000000-0xffff888000000000 255G pud 0xffff888000000000-0xffffc20000000000 58880G pgd Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2008-10-302-3/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: remove sched-design.txt from 00-INDEX sched: change sched_debug's mode to 0444
| * | | | sched: remove sched-design.txt from 00-INDEXLi Zefan2008-10-301-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: remove stale documentation reference sched-design.txt has been removed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | | sched: change sched_debug's mode to 0444Li Zefan2008-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: change /proc/sched/debug from rw-r--r-- to r--r--r-- /proc/sched_debug is read-only. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | | Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds2008-10-303-10/+20
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ftrace: handle archs that do not support irqs_disabled_flags
| * | | | | ftrace: handle archs that do not support irqs_disabled_flagsSteven Rostedt2008-10-313-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: build fix on non-lockdep architectures Some architectures do not support a way to read the irq flags that is set from "local_irq_save(flags)" to determine if interrupts were disabled or enabled. Ftrace uses this information to display to the user if the trace occurred with interrupts enabled or disabled. Besides the fact that those archs that do not support this will fail to compile, unless they fix it, we do not want to have the trace simply say interrupts were not disabled or they were enabled, without knowing the real answer. This patch adds a 'X' in the output to let the user know that the architecture they are running on does not support a way for the tracer to determine if interrupts were enabled or disabled. It also lets those same archs compile with tracing enabled. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | | | Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds2008-10-301-1/+3
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: resources: fix x86info results ioremap.c:226 __ioremap_caller+0xf2/0x2d6() WARNINGs
| * | | | | | resources: fix x86info results ioremap.c:226 __ioremap_caller+0xf2/0x2d6() ↵Suresh Siddha2008-10-281-1/+3
| | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNINGs Impact: avoid false-positive WARN_ON() Andi Kleen reported: > When running x86info on a 2.6.27-git8 system I get > > resource map sanity check conflict: 0x9e000 0x9efff 0x10000 0x9e7ff System RAM > ------------[ cut here ]------------ > WARNING: at /home/lsrc/linux/arch/x86/mm/ioremap.c:226 __ioremap_caller+0xf2/0x2d6() > ... Some of the pages below the 1MB ISA addresses will be shared typically by both BIOS and system usable RAM. For example: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) x86info reads the low physical address using /dev/mem, which internally uses ioremap() for accessing non RAM pages. ioremap() of such low pages conflicts with multiple resource entities leading to the above warning. Change the iomem_map_sanity_check() to allow mapping a page spanning multiple resource entities (minimum granularity that one can map is a page anyhow). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-10-3027-95/+94
|\ \ \ \ \ \ | |_|_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5326/1: AFEB9260: Fix for i2c_board_info structure [ARM] mx31ads: Add missing include [ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR. [ARM] MX3: Use ioremap wrapper to map SoC devices nonshared [ARM] gpio_free might sleep, arm architecture [ARM] ep93xx: fix OHCI DMA mask leds: da903x: (da9030 only) led brightness reversed. [ARM] sharpsl_pm: fix compilation w/o CONFIG_PM [ARM] pcm037: map AIPS1 and AIPS2 as nonshared area [ARM] build fixes for netX serial driver [ARM] 5323/1: Remove outdated empeg documentation. [ARM] 5299/1: Add maintainer for Mobilepro 900/c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl [ARM] pxa/spitz: fix spi cs on spitz [ARM] 5322/1: Fix fastpath issue in mmci.c [ARM] xsc3: revert writethrough memory-type encoding change
| * | | | | [ARM] 5326/1: AFEB9260: Fix for i2c_board_info structureSergey Lapin2008-10-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c_board_info array was filled incorrectly. Due to circumstances, the way it is filled works. This patch fills array properly. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | Merge branch 'for-rmk-rc' of ↵Russell King2008-10-306-7/+29
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6
| | * | | | | [ARM] mx31ads: Add missing includeSascha Hauer2008-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx31ads_defconfig compilation failed with arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart': arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function) arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.) make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1 Add missing include Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | | [ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR.Darius Augulis2008-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Data register holds the value we have written to a gpio. To get the input value we must read the Pad Status Register MX3 (or Sample Status register in MX1/2 terms) Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | | [ARM] MX3: Use ioremap wrapper to map SoC devices nonsharedSascha Hauer2008-10-301-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | | [ARM] pcm037: map AIPS1 and AIPS2 as nonshared areaSascha Hauer2008-10-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | | [ARM] build fixes for netX serial driverPaul Bolle2008-10-302-4/+4
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the netX serial driver tristate (as the help text implied). Make the serial driver build correctly if the netX serial console is disabled. Do not allow the netX serial console if the netX serial driver is build as a module. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | | | [ARM] gpio_free might sleep, arm architectureUwe Kleine-König2008-10-306-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the arm architecture. DaVinci is skipped on purpose to simplify the merge process for patches switching it over to use gpiolib as per request by David Brownell. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | [ARM] ep93xx: fix OHCI DMA maskMatthias Kaehlcke2008-10-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | Merge branch 'fix' of ↵Russell King2008-10-30245-1765/+4764
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
| | * | | | | leds: da903x: (da9030 only) led brightness reversed.Jonathan Cameron2008-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The brightness control register calculation (for the pwm) is effectively the reverse of what would be expected. 1 is maximum brightness, 255 minimum. This patch inverts this. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| | * | | | | [ARM] sharpsl_pm: fix compilation w/o CONFIG_PMDmitry Baryshkov2008-10-301-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix compilation of sharpsl_pm when CONFIG_PM in unselected. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| | * | | | | [ARM] corgi_lcd: fix simultaneous compilation with corgi_blDmitry Baryshkov2008-10-294-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | corgi_lcd has symbol conflict with corgi_bl driver. Fix it by renaming common symbol in new corgi_lcd driver. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| | * | | | | [ARM] pxa/spitz: fix spi cs on spitzDmitry Baryshkov2008-10-291-0/+12
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On spitz configure SPI CS GPIOs as outputs to unbreak spi chip selection. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | | | [ARM] 5323/1: Remove outdated empeg documentation.Mike Crowe2008-10-293-73/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The documents aren't particularly useful anyway and the hardware in question has never run anything newer than a v2.2.14 kernel to my knowledge. Signed-off-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | [ARM] 5299/1: Add maintainer for Mobilepro 900/cKristoffer Ericson2008-10-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the new maintainer for the Mobilepro 900/c handheld. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Acked-by: Michael Petchkovsky <mkpetch@internode.on.net> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | Merge branch 'fixes' of ↵Russell King2008-10-281-1/+1
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop
| | * | | | | [ARM] xsc3: revert writethrough memory-type encoding changeDan Williams2008-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 40df2d1d "[ARM] Update Xscale and Xscale3 PTE mappings" was fingered by git-bisect for a boot failure on iop13xx. The change made L_PTE_MT_WRITETHROUGH mappings L2-uncacheable. Russell points out that this mapping is used for the vector page. Given the regression, and the fact this page is used often, restore the old behaviour. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
| * | | | | | [ARM] 5322/1: Fix fastpath issue in mmci.cLinus Walleij2008-10-281-2/+3
| | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix fastpath issues Since mmci_request() can be called from a non-interrupt context, and does, during kernel init, causing a host of debug messages during boot if you enable spinlock debugging, we need to use the spinlock calls that save IRQ flags and restore them. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud