summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda: Fix max PCM level to 0 dB for AD1981_HPDaniel T Chen2009-12-141-0/+8
| | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/461062 The original reporter states that PCM maxes at +12 dB and results in very bad distortion. Cap PCM at 0 dB to resolve this symptom. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda: Use ALC260_WILL quirk for another Acer model (0x1025007f)Daniel T Chen2009-12-141-0/+1
| | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/418627 The original reporter states that this quirk is necessary to obtain reasonable gain for playback. Without it, sound is inaudible. Tested with playback (spkr and hp) and capture. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Overwrite pin config on intel DG45ID board.Alexey Fisher2009-12-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | The pin config provided by BIOS have some problems: 0x0221401f: [Jack] HP Out at Ext Front <-- other association and sequence 0x02a19020: [Jack] Mic at Ext Front <-- other association 0x01113014: [Jack] Speaker at Ext Rear <-- line out (not speaker) 0x01114010: [Jack] Speaker at Ext Rear <-- line out 0x01a19030: [Jack] Mic at Ext Rear <-- other association 0x01111012: [Jack] Speaker at Ext Rear <-- line out 0x01116011: [Jack] Speaker at Ext Rear <-- line out 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x01451140: [Jack] SPDIF Out at Ext Rear 0x40f000f0: [N/A] Other at Ext N/A just overwrite it. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* intelhdmi - dont power off HDA linkWu Fengguang2009-12-113-1/+14
| | | | | | | | | | | | | For codecs without EPSS support (G45/IbexPeak), the hotplug event will be lost if the HDA is powered off during the time. After that the pin presence detection verb returns inaccurate info. So always power-on HDA link for !EPSS codecs. KarL offers the fact and Takashi recommends to flag hda_bus. Thanks! Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: intelhdmi - add channel mapping for typical configurationsWu Fengguang2009-12-111-22/+67
| | | | | | | | | | | | | | | | | | | IbexPeak is the first Intel HDMI audio codec to support channel mapping. Currently the outstanding problem is, the HDMI channel order do not agree with that of ALSA. This patch presents workaround for some typical use cases. It gives priority to the typical ALSA surround configurations, and defines channel mapping for them. We may need better kernel+userspace interactive channel mapping scheme. For example, in current scheme if user plays with the surround50 device, the kernel is unaware of this and will still select the surround41 channel allocation and channel mapping.. Thanks to Marcin for offering good tips! Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: intelhdmi - channel mapping applies to PinWu Fengguang2009-12-111-6/+8
| | | | | | | | | | | | HDA036-A specifies that the Audio Sample Packet (ASP) Channel Mapping verbs apply to Digital Display Pin Complex instead of Converter. With this fix, channel mapping is working as expected for IbexPeak. Thanks to Marcin for pointing this out! Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: intelhdmi - accept DisplayPort pinWu Fengguang2009-12-113-1/+6
| | | | | | | | | | | | | HDA036 spec states: DP (Display Port) indicates whether the Pin Complex Widget supports connection to a Display Port sink. Supported if set to 1. Note that it is possible for the pin widget to support more than one digital display connection type, e.g. HDMI and DP bit are both set to 1. Also export the DP pin cap in procfs. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - show HBR(High Bit Rate) pin cap in procfsWu Fengguang2009-12-112-1/+5
| | | | | | | Note that the HBR capability only applies to HDMI pin. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix LED GPIO setup for HP laptops with IDT codecsVitaliy Kulikov2009-12-111-27/+68
| | | | | | | | | | | | | | | | | | | This patch fixes an error in processing of the HP BIOS configuration to enable GPIO based mute LED indicator control. That error causes driver to enable such control on all HP systems with the 92HD75 IDT codecs and results in unnecessary toggling of the GPIO on mute control manipulation. It also adds support of the future HP BIOS configuration extension for the named control. New configuration string has a format HP_Mute_LED_P_G where P can be 0 or 1 and defines mute LED GPIO control state (low/high) that corresponds to the NOT muted state of the master volume and G is the index of the GPIO to use (0..9) Lastly, it adds more systems to the support of the audio implementation as found on HP B-series systems Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek: quirk for D945GCLF2 mainboardDavid Santinoli2009-12-091-0/+1
| | | | | | | | Quirk for the ALC662 found on the Intel D945GCLF2 (and possibly other) mainboards. Signed-off-by: David Santinoli <david@santinoli.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Terradici HDA controllers does not support 64-bit modeJaroslav Kysela2009-12-091-0/+5
| | | | | | | | Confirmed from vendor and tests in RedHat bugzilla #536782 . Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: document: Add direct git link to grub hda-analyzerAlexey Fisher2009-12-091-2/+4
| | | | | | | Just to save some time, add direct git link to grub hda-analyzer Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Generalize EAPD inversion check in patch_analog.cTakashi Iwai2009-12-081-8/+9
| | | | | | | Add a flag to spec field so that the EAPD inversion can be checked outside the relevant control callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Exclude unusable ADCs for ALC88xTakashi Iwai2009-12-081-1/+12
| | | | | | | | | | | | | | On Realtek codecs, a digital mic pin is connected often only to a single ADC. But the parser tries to set up all ADCs no matter whether the digital mic is available, and results in non-selectable input source. This patch adds a check of input-source availability of each ADC, and excludes ones that don't support all input sources. Reference: Novell bnc#561235 http://bugzilla.novell.com/show_bug.cgi?id=561235 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add missing Line-Out and PCM switches as slaveTakashi Iwai2009-12-081-0/+2
| | | | | | | Realtek codecs may have "PCM" and "Line-Out" playback switches, and they can be slaves for vmaster. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - iMac 9,1 sound patch.Justin P. Mattock2009-12-082-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an updated patch for the Apple iMac 9,1 model to add sound. Original patch posted here: http://article.gmane.org/gmane.linux.alsa.devel/61361/match= I have been using this patch for a while now and have to say it works vary well, except for a few minor things: With the iMac 24-inch 3.06GHz Intel Core 2 Duo everything seems to be working as it should, although I have not looked into the microphone (never really use one, nor have any apps to test, my guess is it doesn't work, or I never figured out how to get it to work). With the iMac 24-inch 2.66GHz Intel Core 2 Duo everything is the same as with the above machine except I'm hearing a light scratchy/distortion noise come out of the speakers when using headphones(above machine does not do this). Other than that the sound level is great(especially with good Dj headphones). Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix memory leaks in the previous patchTakashi Iwai2009-12-031-7/+11
| | | | | | | The previous hack for replacing the codec name give memory leaks at error paths. This patch fixes them. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add ALC661/259, ALC892/888VD supportKailang Yang2009-12-031-2/+42
| | | | | | | | | | | Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/ice1724-quartet' into topic/hdaTakashi Iwai2009-12-0113-85/+2326
|\
| * ALSA: ice1724 - Infrasonic Quartet supportPavel Hofman2009-09-214-1/+1144
| | | | | | | | | | | | | | | | * three external clock types * all controls supported Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ice1724 - Support for multiple external clock typesPavel Hofman2009-09-213-16/+52
| | | | | | | | | | | | | | | | | | | | * Support for customization of the external clock names * Adding hooks to playback_pro_open and capture_pro_open, allowing e.g. limiting available stream rates to a single value when the external clock rate is detected Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ice1724 - pro-rate-locking makes sense only for internal clock modePavel Hofman2009-09-211-7/+16
| | | | | | | | | | | | | | | | * pro-rate-locking applies to internal clock mode only * required rate and current rate are compared for internal clock mode only Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ice1724 - adding GPIO routines for mask and directionPavel Hofman2009-09-213-0/+38
| | | | | | | | | | | | | | * get/set routines for GPIO mask and direction Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ak4113 supportPavel Hofman2009-09-213-1/+962
| | | | | | | | | | | | | | | | * complete support for ak4113 * based on code for ak4114 and ak4117 Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ak4620 support, codec regs listed in procPavel Hofman2009-09-213-54/+108
| | | | | | | | | | | | | | | | | | | | * complete support for ak4620 * codec regs listed in proc for all codecs/chips * adding total regs for each codec * fixing nb. of steps in input attenuation controls Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: ak4114 - fix errors in output selector bitsPavel Hofman2009-09-211-6/+6
| | | | | | | | | | | | | | | | | | * the previous version had a typo - values of AK4114_OPS10-12 were identical with AK4114_OPS00-02 * Since no cards actually use this feature, the bug was not identified earlier Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'topic/oxygen' into topic/hdaTakashi Iwai2009-12-0114-1188/+2276
|\ \
| * | sound: oxygen: fix input monitor control namesClemens Ladisch2009-09-281-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Insert "Playback" into the input monitor control names to prevent alsa-lib from treating these controls as global controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: add high-pass filter controlClemens Ladisch2009-09-281-2/+71
| | | | | | | | | | | | | | | | | | | | | Add a control that allows disabling the high-pass filter of the WM8785 ADC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: add digital filter controlClemens Ladisch2009-09-283-9/+223
| | | | | | | | | | | | | | | | | | | | | | | | Add a control to select between sharp and slow roll-of filter responses of the DACs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: virtuoso: add PCM1796 oversampling controlClemens Ladisch2009-09-281-25/+157
| | | | | | | | | | | | | | | | | | | | | | | | Add a control to increase the oversampling factor to 128x on cards with PCM1796 or PCM1792A DACs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: allow custom MCLK ratesClemens Ladisch2009-09-286-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | Add a callback that allows model drivers to modify the default I2S MCLK rate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: virtuoso: add headphone impedance controlClemens Ladisch2009-09-281-11/+99
| | | | | | | | | | | | | | | | | | | | | | | | Add a mixer control to adjust the headphone amplifier output for headphones with different impedances. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: cache codec registersClemens Ladisch2009-09-284-152/+250
| | | | | | | | | | | | | | | | | | | | | Keep a cache of codec registers to avoid unnecessary writes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: more hardware documentationClemens Ladisch2009-09-284-0/+33
| | | | | | | | | | | | | | | | | | | | | Add some comments describing the hardware pin routing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: add stereo upmixing to center/LFE channelsClemens Ladisch2009-09-284-21/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the possibility to route a mix of the two channels of stereo data to the center and LFE outputs. This is implemented only for models where the DACs support this, i.e., for the Xonar D1 and DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: better defaults for upmixing controlClemens Ladisch2009-09-283-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | On card models with two-channel outputs, the base driver can automatically disable the upmixing control so that the model drivers do not need to do this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: virtuoso: fix Xonar Essence ST supportClemens Ladisch2009-09-282-6/+190
| | | | | | | | | | | | | | | | | | | | | | | | The Essence ST uses the CS2000 chip to generate the DAC master clock, so we better initialize and program it appropriately. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: virtuoso: split virtuoso.cClemens Ladisch2009-09-287-1092/+1290
| | | | | | | | | | | | | | | | | | | | | | | | The virtuoso.c file has become rather big. This patch splits it up so that only code for very similar card models is in one file. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: fix for PI7C9X110 compatibilityClemens Ladisch2009-09-281-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | If the card is used with a Pericom PI7C9X110 PCI-E/PCI bridge, reconfigure the latter's PCI buffering to fix an unknown problem. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | sound: oxygen: do not try to restore nonexistent EEPROMClemens Ladisch2009-09-281-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | On cards where the EEPROM was deliberately omitted, we do not need to try to restore the EEPROM's contents. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Add position_fix quirk for HP dv3Takashi Iwai2009-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | HP dv3 requires position_fix=1. Reference: Novell bnc#555935 https://bugzilla.novell.com/show_bug.cgi?id=555935 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Add a pin-fix for FSC Amilo Pi1505Takashi Iwai2009-12-011-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix Cxt5047 test modeTakashi Iwai2009-11-301-10/+1
| | | | | | | | | | | | | | | | | | | | | The NID 0x1a of Conexant 5047 chip is a mic boost volume only with the output amp unlike 5045 chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Add a position_fix quirk for MSI Wind U115Takashi Iwai2009-11-301-0/+1
| | | | | | | | | | | | | | | | | | | | | MSI Wind U115 seems to require position_fix=1 explicitly. Otherwise it screws up PulseAudio. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Don't trigger pin-sense for STAC/IDT codecsTakashi Iwai2009-11-271-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | STAC/IDT codecs seem to behave weird when SET_PIN_SENSE verb is issued before reading the jack-detection although the TRIG_REQ pin capability is given by the hardware. Since snd_hda_jack_detect() issues the SET_PIN_SENSE verb simply judging from the pincap, we have to revert the change in the commit d56757abc11a21996d9839c0d4e3b2c3666cd318 ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect() to plain GET_PIN_SENSE verb without triggering. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda: Fix max PCM level to 0 dB for Fujitsu-Siemens laptops using ↵Daniel T Chen2009-11-261-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CX20549 (Venice) BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4792 Cristian reported that these models have really bad sound above 6 dB and proposed the original patch. I've updated the comment to reflect this change. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Reported-by: Cristian Klein Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Make Dell Vostro 1015n mic and speaker switching workEinar Rünkaru2009-11-241-0/+134
| | | | | | | | | | | | | | | | | | | | | | | | Dell Vostro 1015n uses Conexant CX20583-10Z (0x14f1:5067). Patch is based on "olpc-xo-1_5" branch. Dell uses digital mic. Signed-off-by: Einar Rünkaru <einarry@smail.ee> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | Revert "ALSA: hda - Change quirk for Acer Aspire 5930G"Takashi Iwai2009-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit f2624791a0c2a2d7664b12d75ca327917141fd3b. Łukasz Wojniłowicz reported that the change causes both internal and external mics not working any more. The headphone jacking issue was fixed by his previous patch, it's better to revert to acer-aspire-4930g model. Reported-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ALSA: hda - Fix input and jack Kconfig depenenciesTakashi Iwai2009-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SND_JACK needs to be selected explicitly only when INPUT=y or INPUT_SND. The current way, INPUT=SND_HDA_INTEL isn't strict enough. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud