summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* jmicron: update quirk for JMB361/3/5/6Tejun Heo2007-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the quirk. This has the following effects and is recommended by the vendor. * Force enable of IDE channels (used to be left alone as BIOS configured) * Change initial phase behavior of PIO cycle such that the host pulls down the bus instead of tristating it. Vendor recommends this setting. The above settings are better for the current generation of controllers and needed for the upcoming next generation. Tested on JMB363. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add HTS542525K9SA00 to NCQ blacklistTejun Heo2007-10-231-0/+1
| | | | | | | | Another one doing spurious NCQ completions. Blacklist it. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-core: auditting chk_status v check_statusAlan Cox2007-10-231-1/+1
| | | | | | | | | | | | | Did a complete audit of these and found we have another error case. ata_bus_softreset calls ata_check_status which means that it tries to do an ioread8 on the port blindly and check versus 0xFF for an error. It should of course be using the ap->ops method for this via chk_status, and this bug causes a wrog status call on the NS87415 at least. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] checkpatch-inspired cleanupsJeff Garzik2007-10-2313-264/+262
| | | | | | | | | | | | Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-10-237-5/+382
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: v9fs_vfs_rename incorrect clunk order 9p: fix memleak in fs/9p/v9fs.c 9p: add virtio transport
| * 9p: v9fs_vfs_rename incorrect clunk orderLatchesar Ionkov2007-10-231-2/+2
| | | | | | | | | | | | | | | | In v9fs_vfs_rename function labels don't match the fids that are clunked. The correct clunk order is clunking newdirfid first and then olddirfid next. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
| * 9p: fix memleak in fs/9p/v9fs.cAdrian Bunk2007-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | This patch fixes a memory leak introduced by commit ba17674fe02909fef049fd4b620a2805bdb8c693. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
| * 9p: add virtio transportEric Van Hensbergen2007-10-235-3/+379
| | | | | | | | | | | | | | | | | | This adds a transport to 9p for communicating between guests and a host using a virtio based transport. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
* | [PATCH] Fix breakage after SG cleanupsRalf Baechle2007-10-2312-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | xtensa: fix sg->page falloutEmil Medve2007-10-231-8/+5
| | | | | | | | | | Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | mmc: fix sg->page falloutEmil Medve2007-10-231-1/+1
| | | | | | | | | | Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | [SG] Add debug check for page alignmentJens Axboe2007-10-231-0/+5
|/ | | | | | Suggested by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-10-2319-324/+284
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Increase command timeout for INIT_HCA to 10 seconds IPoIB/cm: Use common CQ for CM send completions IB/uverbs: Fix checking of userspace object ownership IB/mlx4: Sanity check userspace send queue sizes IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))" IB/ehca: Enable large page MRs by default IB/ehca: Change meaning of hca_cap_mr_pgsize IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr() IB/ehca: Fix masking error in {,re}reg_phys_mr() IB/ehca: Supply QP token for SRQ base QPs IPoIB: Use round_jiffies() for ah_reap_task RDMA/cma: Fix deadlock destroying listen requests RDMA/cma: Add locking around QP accesses IB/mthca: Avoid alignment traps when writing doorbells mlx4_core: Kill mlx4_write64_raw()
| * mlx4_core: Increase command timeout for INIT_HCA to 10 secondsJack Morgenstein2007-10-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The current INIT_HCA firmware command timeout is sufficient for the default number of resources (QPs, CQs, etc) being allocated, but if the HCA profile is modified to increase the amount of resources, then a spurious timeout is detected and HCA initialization fails. Increase the timeout for the INIT_HCA command to 10 seconds, which also brings it into line with all the other command timeouts. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IPoIB/cm: Use common CQ for CM send completionsMichael S. Tsirkin2007-10-194-95/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the same CQ for CM send completions as for all other IPoIB completions. This means all completions are processed via the same NAPI polling routine. This should help reduce the number of interrupts for bi-directional traffic (such as TCP) and fixes "driver is hogging interrupts" errors reported for IPoIB send side, e.g. <https://bugs.openfabrics.org/show_bug.cgi?id=508> To do this, keep a per-interface counter of outstanding send WRs, and stop the interface when this counter reaches the send queue size to avoid CQ overruns. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/uverbs: Fix checking of userspace object ownershipRoland Dreier2007-10-191-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9ead190b ("IB/uverbs: Don't serialize with ib_uverbs_idr_mutex") rewrote how userspace objects are looked up in the uverbs module's idrs, and introduced a severe bug in the process: there is no checking that an operation is being performed by the right process any more. Fix this by adding the missing check of uobj->context in __idr_get_uobj(). Apparently everyone is being very careful to only touch their own objects, because this bug was introduced in June 2006 in 2.6.18, and has gone undetected until now. Cc: stable <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/mlx4: Sanity check userspace send queue sizesJack Morgenstein2007-10-181-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Add sanity checks to send queue sizes passed in from userspace. The minimum sq stride value below is taken from the MT25408 PRM (section 11.10, Table 306, log_sq_stride definition). Without this check, userspace can submit arbitrarily large/small values for the number of WQEs and the stride, which can crash the kernel. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"Roland Dreier2007-10-171-1/+1
| | | | | | | | | | | | | | It's too hard to figure out what "!likely(...)" really means, and who knows how compilers interpret the hint. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ehca: Enable large page MRs by defaultJoachim Fenkes2007-10-171-1/+1
| | | | | | | | | | Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ehca: Change meaning of hca_cap_mr_pgsizeJoachim Fenkes2007-10-174-22/+36
| | | | | | | | | | | | | | | | | | | | ehca_shca.hca_cap_mr_pgsize now contains all supported page sizes ORed together. This makes some checks easier to code and understand, plus we can return this value verbatim in query_hca(), fixing a problem with SRP (reported by Anton Blanchard -- thanks!). Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()Joachim Fenkes2007-10-171-11/+4
| | | | | | | | | | | | | | | | Simplify ehca_encode_hwpage_size(), fixing an infinite loop for pgsize == 0 in the process. Fix the bug in alloc_fmr() that triggered the loop. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ehca: Fix masking error in {,re}reg_phys_mr()Joachim Fenkes2007-10-171-2/+2
| | | | | | | | | | Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ehca: Supply QP token for SRQ base QPsJoachim Fenkes2007-10-171-1/+3
| | | | | | | | | | | | | | | | Because hardware reports the SRQ token in RWQEs of SRQ base QPs, supply the base QP token as SRQ token, so we can properly find the SRQ base QP. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IPoIB: Use round_jiffies() for ah_reap_taskAnton Blanchard2007-10-161-2/+4
| | | | | | | | | | | | | | | | Use round_jiffies() to align the 1 second ah_reap_task with other work and potentially save power by sleeping cores for longer. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/cma: Fix deadlock destroying listen requestsSean Hefty2007-10-161-47/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Deadlock condition reported by Kanoj Sarcar <kanoj@netxen.com>. The deadlock occurs when a connection request arrives at the same time that a wildcard listen is being destroyed. A wildcard listen maintains per device listen requests for each RDMA device in the system. The per device listens are automatically added and removed when RDMA devices are inserted or removed from the system. When a wildcard listen is destroyed, rdma_destroy_id() acquires the rdma_cm's device mutex ('lock') to protect against hot-plug events adding or removing per device listens. It then tries to destroy the per device listens by calling ib_destroy_cm_id() or iw_destroy_cm_id(). It does this while holding the device mutex. However, if the underlying iw/ib CM reports a connection request while this is occurring, the rdma_cm callback function will try to acquire the same device mutex. Since we're in a callback, the ib_destroy_cm_id() or iw_destroy_cm_id() calls will block until their callback thread returns, but the callback is blocked waiting for the device mutex. Fix this by re-working how per device listens are destroyed. Use rdma_destroy_id(), which avoids the deadlock, in place of cma_destroy_listen(). Additional synchronization is added to handle device hot-plug events and ensure that the id is not destroyed twice. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/cma: Add locking around QP accessesSean Hefty2007-10-161-30/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a user allocates a QP on an rdma_cm_id, the rdma_cm will automatically transition the QP through its states (RTR, RTS, error, etc.) While the QP state transitions are occurring, the QP itself must remain valid. Provide locking around the QP pointer to prevent its destruction while accessing the pointer. This fixes an issue reported by Olaf Kirch from Oracle that resulted in a system crash: "An incoming connection arrives and we decide to tear down the nascent connection. The remote ends decides to do the same. We start to shut down the connection, and call rdma_destroy_qp on our cm_id. ... Now apparently a 'connect reject' message comes in from the other host, and cma_ib_handler() is called with an event of IB_CM_REJ_RECEIVED. It calls cma_modify_qp_err, which for some odd reason tries to modify the exact same QP we just destroyed." Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/mthca: Avoid alignment traps when writing doorbellsRoland Dreier2007-10-155-96/+47
| | | | | | | | | | | | | | | | | | | | Architectures such as ia64 see alignment traps when doing a 64-bit read from __be32 doorbell[2] arrays to do doorbell writes in mthca_write64(). Fix this by just passing the two halves of the doorbell value into mthca_write64(). This actually improves the generated code by allowing the compiler to see what's going on better. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * mlx4_core: Kill mlx4_write64_raw()Roland Dreier2007-10-141-11/+0
| | | | | | | | | | | | It's a leftover from development that's never used in the real driver. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguestLinus Torvalds2007-10-2370-4401/+4822
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (45 commits) Use "struct boot_params" in example launcher Loading bzImage directly. Revert lguest magic and use hook in head.S Update lguest documentation to reflect the new virtual block device name. generalize lgread_u32/lgwrite_u32. Example launcher handle guests not being ready for input Update example launcher for virtio Lguest support for Virtio Remove old lguest I/O infrrasructure. Remove old lguest bus and drivers. Virtio helper routines for a descriptor ringbuffer implementation Module autoprobing support for virtio drivers. Virtio console driver Block driver using virtio. Net driver using virtio Virtio interface Boot with virtual == physical to get closer to native Linux. Allow guest to specify syscall vector to use. Rename "cr3" to "gpgdir" to avoid x86-specific naming. Pagetables to use normal kernel types ...
| * | Use "struct boot_params" in example launcherRusty Russell2007-10-231-25/+22
| | | | | | | | | | | | | | | | | | | | | Now that the "struct boot_params" is userspace accessible, we don't need magic numbers. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Loading bzImage directly.Rusty Russell2007-10-231-64/+29
| | | | | | | | | | | | | | | | | | | | | Now arch/i386/boot/compressed/head.S understands the hardware_platform field, we can directly execute bzImages. No more horrific unpacking code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Revert lguest magic and use hook in head.SRusty Russell2007-10-233-58/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Version 2.07 of the boot protocol uses 0x23C for the hardware_subarch field, that for lguest is "1". This allows us to use the standard boot entry point rather than the "GenuineLguest" string hack. The standard entry point also clears the BSS and copies the boot parameters and commandline for us, saving more code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Update lguest documentation to reflect the new virtual block device name.Chris Malley2007-10-231-3/+3
| | | | | | | | | | | | | | | Signed-off-by: Chris Malley <mail@chrismalley.co.uk> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | generalize lgread_u32/lgwrite_u32.Rusty Russell2007-10-237-46/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jes complains that page table code still uses lgread_u32 even though it now uses general kernel pte types. The best thing to do is to generalize lgread_u32 and lgwrite_u32. This means we lose the efficiency of getuser(). We could potentially regain it if we used __copy_from_user instead of copy_from_user, but I'm not certain that our range check is equivalent to access_ok() on all platforms. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jes Sorensen <jes@sgi.com>
| * | Example launcher handle guests not being ready for inputRusty Russell2007-10-231-50/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently discard console and network input when the guest has no input buffers. This patch changes that, so that we simply stop listening to that fd until the guest refills its input buffers. This is particularly important because hvc_console without interrupts does backoff polling and so often lose characters if we discard. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Update example launcher for virtioRusty Russell2007-10-231-462/+681
| | | | | | | | | | | | | | | | | | | | | | | | Implements virtio-based console, network and block servers. The block server uses a thread so it's async, which is an improvement over the old synchronous implementation (but a little more complex). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Lguest support for VirtioRusty Russell2007-10-235-28/+421
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes lguest able to use the virtio devices. We change the device descriptor page from a simple array to a variable length "type, config_len, status, config data..." format, and implement virtio_config_ops to read from that config data. We use the virtio ring implementation for an efficient Guest <-> Host virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the host when it changes. We also use LHCALL_NOTIFY on kernel addresses for very very early console output. We could have another hypercall, but this hack works quite well. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Remove old lguest I/O infrrasructure.Rusty Russell2007-10-238-752/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch gets rid of the old lguest host I/O infrastructure and replaces it with a single hypercall "LHCALL_NOTIFY" which takes an address. The main change is the removal of io.c: that mainly did inter-guest I/O, which virtio doesn't yet support. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Remove old lguest bus and drivers.Rusty Russell2007-10-2313-1503/+0
| | | | | | | | | | | | | | | | | | | | | This gets rid of the lguest bus, drivers and DMA mechanism, to make way for a generic virtio mechanism. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Virtio helper routines for a descriptor ringbuffer implementationRusty Russell2007-10-235-0/+439
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These helper routines supply most of the virtqueue_ops for hypervisors which want to use a ring for virtio. Unlike the previous lguest implementation: 1) The rings are variable sized (2^n-1 elements). 2) They have an unfortunate limit of 65535 bytes per sg element. 3) The page numbers are always 64 bit (PAE anyone?) 4) They no longer place used[] on a separate page, just a separate cacheline. 5) We do a modulo on a variable. We could be tricky if we cared. 6) Interrupts and notifies are suppressed using flags within the rings. Users need only get the ring pages and provide a notify hook (KVM wants the guest to allocate the rings, lguest does it sanely). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com>
| * | Module autoprobing support for virtio drivers.Rusty Russell2007-10-232-0/+36
| | | | | | | | | | | | | | | | | | | | | This adds the logic to convert the virtio ids into module aliases, and includes a modalias entry in sysfs and the env var to make probing work. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Virtio console driverRusty Russell2007-10-234-0/+242
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an hvc-based virtio console driver. It's suboptimal becuase hvc expects to have raw access to interrupts and virtio doesn't assume that, so it currently polls. There are two solutions: expose hvc's "kick" interface, or wean off hvc. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Block driver using virtio.Rusty Russell2007-10-235-0/+367
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The block driver uses scatter-gather lists with sg[0] being the request information (struct virtio_blk_outhdr) with the type, sector and inbuf id. The next N sg entries are the bio itself, then the last sg is the status byte. Whether the N entries are in or out depends on whether it's a read or a write. We accept the normal (SCSI) ioctls: they get handed through to the other side which can then handle it or reply that it's unsupported. It's not clear that this actually works in general, since I don't know if blk_pc_request() requests have an accurate rq_data_dir(). Although we try to reply -ENOTTY on unsupported commands, ioctl(fd, CDROMEJECT) returns success to userspace. This needs a separate patch. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <jens.axboe@oracle.com>
| * | Net driver using virtioRusty Russell2007-10-235-0/+479
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The network driver uses two virtqueues: one for input packets and one for output packets. This has nice locking properties (ie. we don't do any for recv vs send). TODO: 1) Big packets. 2) Multi-client devices (maybe separate driver?). 3) Resolve freeing of old xmit skbs (Christian Borntraeger) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org
| * | Virtio interfaceRusty Russell2007-10-2310-0/+419
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This attempts to implement a "virtual I/O" layer which should allow common drivers to be efficiently used across most virtual I/O mechanisms. It will no-doubt need further enhancement. The virtio drivers add buffers to virtio queues; as the buffers are consumed the driver "interrupt" callbacks are invoked. There is also a generic implementation of config space which drivers can query to get setup information from the host. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com> Cc: Arnd Bergmann <arnd@arndb.de>
| * | Boot with virtual == physical to get closer to native Linux.Rusty Russell2007-10-2312-148/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) This allows us to get alot closer to booting bzImages. 2) It means we don't have to know page_offset. 3) The Guest needs to modify the boot pagetables to create the PAGE_OFFSET mapping before jumping to C code. 4) guest_pa() walks the page tables rather than using page_offset. 5) We don't use page_offset to figure out whether to emulate: it was always kinda quesationable, and won't work for instructions done before remapping (bzImage unpacking in particular). 6) We still want the kernel address for tlb flushing: have the initial hypercall give us that, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Allow guest to specify syscall vector to use.Rusty Russell2007-10-236-11/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch). This patch allows Guests to specify what system call vector they want, and we try to reserve it. We only allow one non-Linux system call vector, to try to avoid DoS on the Host. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Rename "cr3" to "gpgdir" to avoid x86-specific naming.Rusty Russell2007-10-232-12/+12
| | | | | | | | | | | | Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | Pagetables to use normal kernel typesMatias Zabaljauregui2007-10-233-141/+98
| | | | | | | | | | | | | | | | | | | | | | | | This is my first step in the migration of page_tables.c to the kernel types and functions/macros (2.6.23-rc3). Seems to be working OK. Signed-off-by: Matias Zabaljauregui <matias.zabaljauregui@cern.ch> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | lguest.h declares a struct timespec, make it include linux/time.hJes Sorensen2007-10-231-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
OpenPOWER on IntegriCloud