summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [IPV4]: Aggregate route entries with different TOS valuesIlia Sotnikov2006-03-253-29/+20
| | | | | | | | | | | | | | | | | | | | | | | When we get an ICMP need-to-frag message, the original TOS value in the ICMP payload cannot be used as a key to look up the routes to update. This is because the TOS field may have been modified by routers on the way. Similarly, ip_rt_redirect should also ignore the TOS as the router that gave us the message may have modified the TOS value. The patch achieves this objective by aggregating entries with different TOS values (but are otherwise identical) into the same bucket. This makes it easy to update them at the same time when an ICMP message is received. In future we should use a twin-hashing scheme where teh aggregation occurs at the entry level. That is, the TOS goes back into the hash for normal lookups while ICMP lookups will end up with a node that gives us a list that contains all other route entries that differ only by TOS. Signed-off-by: Ilia Sotnikov <hostcc@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TCP]: Mark tcp_*mem[] __read_mostly.David S. Miller2006-03-251-3/+4
| | | | | | Suggested by Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
* [TCP]: Set default max buffers from memory pool sizeJohn Heffner2006-03-251-9/+14
| | | | | | | | | | This patch sets the maximum TCP buffer sizes (available to automatic buffer tuning, not to setsockopt) based on the TCP memory pool size. The maximum sndbuf and rcvbuf each will be up to 4 MB, but no more than 1/128 of the memory pressure threshold. Signed-off-by: John Heffner <jheffner@psc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Fix up sctp_rcv return valueHerbert Xu2006-03-251-8/+4
| | | | | | | | | | | | | | | | | | | | | | I was working on the ipip/xfrm problem and as usual I get side-tracked by other problems. As part of an attempt to change the IPv4 protocol handler calling convention I found that SCTP violated the existing convention. It's returning non-zero values after freeing the skb. This is doubly bad as 1) the skb gets resubmitted; 2) the return value is interpreted as a protocol number. This patch changes those return values to zero. IPv6 doesn't suffer from this problem because it uses a positive return value as an indication for resubmission. So the only effect of this patch there is to increment the IPSTATS_MIB_INDELIVERS counter which IMHO is the right thing to do. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Take RTNL when unregistering notifierHerbert Xu2006-03-251-1/+6
| | | | | | | | | | | | | | | The netdev notifier call chain is currently unregistered without taking any locks outside the notifier system. Because the notifier system itself does not synchronise unregistration with respect to the calling of the chain, we as its user need to do our own locking. We are supposed to take the RTNL for all calls to netdev notifiers, so taking the RTNL should be sufficient to protect it. The registration path in dev.c already takes the RTNL so it's OK. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [WIRELESS]: Fix config dependencies.Dave Jones2006-03-241-0/+1
| | | | | | | | | | | I accidentally ended up with a config that set NET_RADIO off, and NET_WIRELESS_RTNETLINK on, which blew up thus.. net/built-in.o: In function `do_setlink':net/core/rtnetlink.c:479: undefined reference to `wireless_rtnetlink_set' net/built-in.o: In function `do_getlink':net/core/rtnetlink.c:521: undefined reference to `wireless_rtnetlink_get' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fill in a 32-bit hole in struct sock on 64-bit platforms.David S. Miller2006-03-241-1/+1
| | | | | | This makes struct sock 8 bytes smaller on 64-bit. Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Ensure device name passed to SO_BINDTODEVICE is NULL terminated.David S. Miller2006-03-241-2/+3
| | | | | | Found by Solar Designer. Signed-off-by: David S. Miller <davem@davemloft.net>
* [MODULES]: Don't allow statically declared exportsPatrick McHardy2006-03-241-0/+1
| | | | | | | | Add an extern declaration for exported symbols to make the compiler warn on symbols declared statically. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: Unaligned accesses in the ethernet bridgePeter Chubb2006-03-241-2/+3
| | | | | | | | | | | | | | I see lots of kernel unaligned access to 0xa0000001009dbb6f, ip=0xa000000100811591 kernel unaligned access to 0xa0000001009dbb6b, ip=0xa0000001008115c1 kernel unaligned access to 0xa0000001009dbb6d, ip=0xa0000001008115f1 messages in my logs on IA64 when using the ethernet bridge with 2.6.16. Appended is a patch to fix them. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] net: ne2k.c won't compile if pci_clone_list is constHorms2006-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | net: ne2k.c won't compile if pci_clone_list is const f71e130966ba429dbd24be08ddbcdf263df9a5ad which (amongst other things) made pci_clone_list in ne2k-pci.c const causes the following compile error. This patch reverses that portion of that changeset drivers/net/ne2k-pci.c:123: error: pci_clone_list causes a section type conflict ~/ gcc --version gcc (GCC) 4.0.3 (Debian 4.0.3-1) ~/ dpkg gcc-4.0 | grep Version Version: 4.0.3-1 Signed-Off-By: Horms <horms@verge.net.au ne2k-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) cee0890cc97247b6a9decd94f5dc0719ac8f0b1b Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] AT91RM9200 Ethernet driverAndrew Victor2006-03-245-0/+1358
| | | | | | | | | | | | This patch adds support for the Ethernet controller integrated in the Atmel AT91RM9200 SoC processor. Changes since the previous submission (01/02/2006) are: - Make use of the clk.h clock infrastructure. - The multicast hash function is not crc32. [Patch by Pedro Perez] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2006-03-2412-506/+551
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: Remove dependence on host_set->dev for SAS [PATCH] libata: ata_scsi_ioctl cleanup [PATCH] libata: ata_scsi_queuecmd cleanup [libata] export ata_dev_pair; trim trailing whitespace [PATCH] libata: add ata_dev_pair helper [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE. [PATCH] libata: make ata_set_mode() responsible for failure handling [PATCH] libata: use ata_dev_disable() in ata_bus_probe() [PATCH] libata: implement ata_dev_disable() [PATCH] libata: check if port is disabled after internal command [PATCH] libata: make per-dev transfer mode limits per-dev [PATCH] libata: add per-dev pio/mwdma/udma_mask [PATCH] libata: implement ata_unpack_xfermask() [libata] Move some bmdma-specific code to libata-bmdma.c [libata sata_uli] kill scr_addr abuse [libata sata_nv] eliminate duplicate codepaths with iomap [libata sata_nv] cleanups: convert #defines to enums; remove in-file history [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
| * [PATCH] libata: Remove dependence on host_set->dev for SASBrian King2006-03-242-6/+8
| | | | | | | | | | | | | | | | | | Remove some of the dependence on the host_set struct in preparation for supporting SAS HBAs. Adds a struct device pointer to the ata_port struct. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: ata_scsi_ioctl cleanupBrian King2006-03-241-13/+0
| | | | | | | | | | | | | | | | | | In preparation for SAS, kill some unnecessary code in ata_scsi_ioctl to find the ATA port and device given the scsi_device. Neither local is used in the function. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: ata_scsi_queuecmd cleanupBrian King2006-03-241-14/+18
| | | | | | | | | | | | | | | | Encapsulate part of ata_scsi_queuecmd so that it can be reused by future SAS patches. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [libata] export ata_dev_pair; trim trailing whitespaceJeff Garzik2006-03-246-47/+48
| | | | | | | | | | | | | | | | Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
| * [PATCH] libata: add ata_dev_pair helperAlan Cox2006-03-242-0/+19
| | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.Nigel Cunningham2006-03-245-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment libata doesn't pass pm_message_t down ata_device_suspend. This causes drives to be powered down when we just want a freeze, causing unnecessary wear and tear. This patch gets pm_message_t passed down so that it can be used to determine whether to power down the drive. Signed-off-by: Nigel Cunningham <nigel@suspend2.net> drivers/scsi/libata-core.c | 5 +++-- drivers/scsi/libata-scsi.c | 4 ++-- drivers/scsi/scsi_sysfs.c | 2 +- include/linux/libata.h | 4 ++-- include/scsi/scsi_host.h | 2 +- 5 files changed, 9 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: make ata_set_mode() responsible for failure handlingTejun Heo2006-03-241-20/+36
| | | | | | | | | | | | | | | | | | | | | | Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: use ata_dev_disable() in ata_bus_probe()Tejun Heo2006-03-241-3/+1
| | | | | | | | | | | | | | | | | | We may or may not disable a device after ata_dev_configure() fails. Kill 'not supported, ignoring' message in ata_dev_configure() and use ata_dev_disable() in ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: implement ata_dev_disable()Tejun Heo2006-03-241-0/+9
| | | | | | | | | | | | | | | | | | | | | | This patch implements ata_dev_disable() which prints a warning message and takes @dev offline. Currently, this is done by explicitly incrementing dev->class with case-by-case warning messages. Giving user clear indication when libata gives up will be more important as libata will be doing more retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: check if port is disabled after internal commandTejun Heo2006-03-241-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata core is being changed to disallow port/device disable on lower layers. However, some LLDDs (sata_mv) directly disable port on command failure. This patch makes ata_exec_internal() check whether a port got disabled after an internal command. If it is, AC_ERR_SYSTEM is added to err_mask and the port gets re-enabled. As internal command failure results in device disable for drivers which don't implement newer reset/EH callbacks, this change results in no behavior change for single device per port controllers. For slave-possible LLDDs which disable port on command failure, (1) such drivers don't exist currently, (2) issuing command to the other device of once-disabled port shouldn't result in catastrophe even if such driver exists. So, this should be enough as a temporary measure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: make per-dev transfer mode limits per-devTejun Heo2006-03-242-2/+2
| | | | | | | | | | | | | | | | Now that each ata_device has xfer masks, per-dev limits can be made per-dev instead of per-port. Make per-dev limits per-dev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: add per-dev pio/mwdma/udma_maskTejun Heo2006-03-242-18/+30
| | | | | | | | | | | | | | | | | | | | Add per-dev pio/mwdma/udma_mask. All transfer mode limits used to be applied to ap->*_mask which unnecessarily restricted other devices sharing the port. This change will also benefit later EH speed down and hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: implement ata_unpack_xfermask()Tejun Heo2006-03-241-0/+23
| | | | | | | | | | | | | | Implement ata_unpack_xfermask(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [libata] Move some bmdma-specific code to libata-bmdma.cJeff Garzik2006-03-232-234/+234
| | | | | | | | No code changes, just moving code between files.
| * [libata sata_uli] kill scr_addr abuseJeff Garzik2006-03-231-10/+27
| | | | | | | | | | | | | | | | sata_uli was storing PCI config addresses in a variable intended for port addresses, a variable soon to become void __iomem *. Update the driver to store the SCR address, found in PCI config space, in the driver-private data area.
| * [libata sata_nv] eliminate duplicate codepaths with iomapJeff Garzik2006-03-221-44/+13
| | | | | | | | | | | | | | | | | | | | eliminate a bunch of if (mmio) writel() else outl() code with the pci_iomap() and io{read,write}{8,16,32}() interface.
| * [libata sata_nv] cleanups: convert #defines to enums; remove in-file historyJeff Garzik2006-03-221-75/+49
| |
| * [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()Jeff Garzik2006-03-221-13/+10
| | | | | | | | | | | | * libata will soon move to iomap, so we should use pci_iomap() and pci_iounmap(). * Use kzalloc() where appropriate.
* | [PATCH] fix build error if CONFIG_SYSFS=nAndrew Morton2006-03-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | uevent_seqnum and uevent_helper are only defined if CONFIG_HOTPLUG=y, CONFIG_NET=n. (I stole this back from Greg's tree - it makes allnoconfig work). Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] strndup_user: convert keyctlDavi Arnaut2006-03-241-105/+50
| | | | | | | | | | | | | | | | | | | | | | Copies user-space string with strndup_user() and moves the type string duplication code to a function (thus fixing a wrong check on the length of the type.) Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] strndup_user: convert moduleDavi Arnaut2006-03-241-16/+3
| | | | | | | | | | | | | | | | | | Change hand-coded userspace string copying to strndup_user. Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] strndup_user()Davi Arnaut2006-03-242-0/+39
| | | | | | | | | | | | | | | | | | | | | | This patch series creates a strndup_user() function to easy copying C strings from userspace. Also we avoid common pitfalls like userspace modifying the final \0 after the strlen_user(). Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] timer-irq-driven soft-watchdog, cleanupsIngo Molnar2006-03-243-27/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the softlockup detector purely timer-interrupt driven, removing softirq-context (timer) dependencies. This means that if the softlockup watchdog triggers, it has truly observed a longer than 10 seconds scheduling delay of a SCHED_FIFO prio 99 task. (the patch also turns off the softlockup detector during the initial bootup phase and does small style fixes) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Fix module refcount leak in __set_personality()Sergey Vlasov2006-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | If the change of personality does not lead to change of exec domain, __set_personality() returned without releasing the module reference acquired by lookup_exec_domain(). Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] ext3: Properly report backup block present in a groupGlauber de Oliveira Costa2006-03-241-7/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails to report the correct number of blocks used to store the group descriptor backups in a given group. It happens because meta_bg follows a different logic from the original ext3 backup placement in groups multiples of 3, 5 and 7. Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] RLIMIT_CPU: document wrong return valueAndrew Morton2006-03-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when it should. I don't think we can fix this without a 2.7.x.. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] RLIMIT_CPU: fix handling of a zero limitAndrew Morton2006-03-241-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero seconds. But the spec says it should, and that's what 2.4.x does. Fixing this for real would involve some complexity (such as adding a new it-has-been-set flag to the task_struct, and testing that everwhere, instead of overloading the value of it_prof_expires). Given that a 2.4 kernel won't actually send the signal until one second has expired anyway, let's just handle this case by treating the caller's zero-seconds as one second. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] sys_setrlimit() cleanupAndrew Morton2006-03-241-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Whitespace cleanups - Make that expression comprehensible. There's a potential logic change here: we do the "is it_prof_expires equal to zero" test after converting it to seconds, rather than doing the comparison between raw cputime_t's. But given that it's in units of seconds anyway, that shouldn't change anything. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] deprecate the tasklist_lock exportChristoph Hellwig2006-03-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers have no business looking at the task list and thus using this lock. The only possibly modular users left are: arch/ia64/kernel/mca.c drivers/edac/edac_mc.c fs/binfmt_elf.c which I'll send out fixes for soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Yet more rio cleaning (2 of 2)Alan Cox2006-03-2418-912/+265
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove more unused headers - Remove various typedefs - Correct type of PaddrP (physical addresses should be ulong) - Kill use of bcopy - More printk cleanups - Kill true/false - Clean up direct access to pci BARs Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Yet more rio cleaning (1 of 2)Alan Cox2006-03-2415-524/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove more unused headers - Remove various typedefs - Correct type of PaddrP (physical addresses should be ulong) - Kill use of bcopy - More printk cleanups - Kill true/false - Clean up direct access to pci BARs Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] rio driver rework continued #5Alan Cox2006-03-243-10/+2
| | | | | | | | | | | | | | | | | | Final polish. There is no more save_flags/cli type locking left. We also no longer use the pcicopy function and file so they can go. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] rio driver rework continued #4Alan Cox2006-03-241-272/+118
| | | | | | | | | | | | | | | | | | | | | | | | Third large chunk of code cleanup. The split between this and #3 and #4 is fairly arbitary and due to the message length limit on the list. These patches continue the process of ripping out macros and typedefs while cleaning up lots of 32bit assumptions. Several inlines for compatibility also get removed and that causes a lot of noise. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] rio driver rework continued #3Alan Cox2006-03-247-535/+232
| | | | | | | | | | | | | | | | | | | | | | | | Second large chunk of code cleanup. The split between this and #3 and #4 is fairly arbitary and due to the message length limit on the list. These patches continue the process of ripping out macros and typedefs while cleaning up lots of 32bit assumptions. Several inlines for compatibility also get removed and that causes a lot of noise. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] rio driver rework continued #2Alan Cox2006-03-244-154/+115
| | | | | | | | | | | | | | | | | | | | | | | | First large chunk of code cleanup. The split between this and #3 and #4 is fairly arbitary and due to the message length limit on the list. These patches continue the process of ripping out macros and typedefs while cleaning up lots of 32bit assumptions. Several inlines for compatibility also get removed and that causes a lot of noise. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] rio driver rework continued #1Alan Cox2006-03-2410-167/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | More header cleanups, strip out typedefs and remove cruft. There are a lot of magic macros that can go and also a great deal of abuse of volatile that is not needed any more as this patch set cleans up the misuse of pointer access to ISA and PCI space. It now builds cleanly on 64bit, although there is more work left to do Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] rioboot: post-LindentAlan Cox2006-03-241-252/+177
| | | | | | | | | | | | | | | | | | After the indent we can now clean up unused code, and fix all myriad cases that don't use readb/writeb properly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud