summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: SAMSUNG: Fix the inverted clocks handling for pcm driverSangbeom Kim2011-04-111-2/+2
| | | | | | | | | | Fix the inverted clocks handling for pcm cpu driver. By using SND_SOC_DAIFMT_NB_NF, Audio noise can be generated on SMDK. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: sst_platform: Fix lock acquringLu Guanqun2011-04-111-4/+6
| | | | | | | | | | | | | | | | | | | | Fix the possible dead lock shown below: spin_lock sst_get_stream_status sst_period_elapsed intel_sst_interrupt handle_IRQ_event handle_fasteoi_irq do_IRQ common_interrupt spin_lock sst_set_stream_status sst_platform_pcm_trigger Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: fsi: driver safely remove for against irqKuninori Morimoto2011-04-111-4/+3
| | | | | | | | | free_irq and pm_runtime_disable should be called before snd_soc_unregister_xxx Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: fsi: modify vague PM control on probeKuninori Morimoto2011-04-111-1/+2
| | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: fsi: take care in failing case of dai registerKuninori Morimoto2011-04-111-1/+10
| | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* MAINTAINERS: Update Samsung ASoC maintainer's idJassi Brar2011-04-091-1/+1
| | | | | | Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: WM8903: HP and Line out PGA/mixer DAPM fixesDilan Lee2011-04-081-15/+23
| | | | | | | | | | | | | | | | | | Update the headphone and line out mixers and PGAs use the same logical set of register bits and sequencing as the speaker mixer/PGA. This allows ALSA controls for mute and volume on headphone and line out to operate correctly. Per conversation on alsa-devel, earlier datasheets indicated that the POWER_MANAGEMENT_* register bits 0 and 1 were aliases to ANALOG_* register bits 0 and 4, and hence only one copy of those bits was programmed. However, later datasheets corrected this. From: Dilan Lee <dilee@nvidia.com> [swarren: Applied same change to headphone widgets] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Set left channel volume update bits for WM8994Mark Brown2011-04-071-0/+16
| | | | | | Ensures that we apply volume updates that don't affect the right channel. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: fix config error pathLu Guanqun2011-04-071-0/+1
| | | | | | | | | | initialize ret to invalid value so that when we reach the config error path in soc_pcm_open, it will return the correct error code. without this patch, though config error path is executed, soc_pcm_open will return 0 in snd_pcm_open_substream and then cause double release of substream. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: check channel mismatch between cpu_dai and codec_daiLu Guanqun2011-04-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | Suppose we have: cpu_dai channels_min = 1 channels_max = 1 codec_dai channels_min = 2 channels_max = 2 This is a mismatch that should not happen, however according to the current code, the result of runtime->hw will be: channels_min = 2 channels_max = 1 We better spot it early. This patch checks this mismatch. Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Tegra: Suspend/resume supportStephen Warren2011-04-062-0/+2
| | | | | | | | | | | ASoC machine drivers that are their own platform_driver (as opposed to those using the soc-audio platform_driver) need to explicitly set up power-management operation callbacks. To avoid cut/paste, snd_soc_pm_ops also needs to be exported. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: format_register_str: Don't clip register valuesStephen Warren2011-04-031-4/+4
| | | | | | | | | | | | | wordsize is used as the textual width of a register address. regsize is used as the textual width of a register value. The assignments to these values were swapped. In the case of WM8903, which has 8-bit register addresses and 16-bit register values, this caused the register values to be clipped to 2 digits instead of the full 4. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-2.6.39' of ↵Mark Brown2011-04-037-17/+23
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.39
| * ASoC: PXA: Fix oops in __pxa2xx_pcm_prepareVasily Khoruzhick2011-04-032-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | pxa2xx_pcm_hw_free frees dma channel and sets prtd->dma_ch to -1, but does not set prtd->params to NULL, so if pxa2xx_pcm_hw_params will be called immediately, it leaves prtd->dma_ch initialized with -1, and it results in oops in __pxa2xx_pcm_prepare. This bug is triggered via SDL. This patch adds check for prtd->dma_ch to __pxa2xx_pcm_prepare and cleans prtd->params, so now it works properly. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: zylonite: set .codec_dai_name in initializerAntonio Ospite2011-03-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | Fix the initialization of .codec_dai_name in zylonite_dai initializer, do not mix it with the initialization of .codec_name which is set already a few lines above. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Fix CODEC device name for CorgiMark Brown2011-03-301-1/+1
| | | | | | | | | | | | | | | | Got typoed in the multi-component changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
| * ASoC: imx: fix burstsize for DMAWolfram Sang2011-03-261-2/+2
| | | | | | | | | | | | | | | | | | | | SSI counts in words, the DMA engine in bytes. (Wrong) factor got removed in bf974a0 (ASoC i.MX: switch to new DMA api). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: imx: set watermarks for mx2-dmaWolfram Sang2011-03-262-3/+5
| | | | | | | | | | | | | | | | | | | | | | They got accidently removed by f0fba2a (ASoC: multi-component - ASoC Multi-Component Support). Reintroduce them and get rid of the superfluous defines because the fiq-driver has its own hardcoded values. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Explicitly say registerless widgets have no registerMark Brown2011-03-231-8/+8
| | | | | | | | | | | | | | | | | | This stops code that handles widgets generically from attempting to access registers for these widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
* | Linux 2.6.39-rc1v2.6.39-rc1Linus Torvalds2011-03-291-2/+2
| |
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-03-2931-1396/+1615
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
| * | mmc: SDHI should depend on SUPERH || ARCH_SHMOBILEGuennadi Liakhovetski2011-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build breakage on platforms, not providing readsw and writesw functions, e.g., on x86(_64). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio_mmc: Move some defines into a shared headerSimon Horman2011-03-264-46/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also add TMIO_BBS. This allows these defines to also be used by zboot. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: support aggressive clock gatingGuennadi Liakhovetski2011-03-251-9/+8
| | | | | | | | | | | | | | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: fix power-mode interpretationGuennadi Liakhovetski2011-03-251-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power-mode sequence on MMC is MMC_POWER_OFF -> MMC_POWER_UP -> MMC_POWER_ON and not MMC_POWER_ON -> MMC_POWER_UP, as the driver currently is implying. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: remove work-around for unmasked SDIO interruptsGuennadi Liakhovetski2011-03-251-21/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SDIO IRQs got unmasked on sh-mobile while writing to the CTL_CLK_AND_WAIT_CTL register, because that register at address 0x138 is not implemented on those SoCs and writes to it overwrite the register at address 0x38: CTL_SDIO_IRQ_MASK. Previous patches eliminated access to register above 0xff on sh-mobile, so that this work-around isn't needed anymore. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | sh: fix SDHI IO address-rangeGuennadi Liakhovetski2011-03-255-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | ARM: mach-shmobile: fix SDHI IO address-rangeGuennadi Liakhovetski2011-03-253-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: only access registers above 0xff, if availableGuennadi Liakhovetski2011-03-251-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all tmio implementations have registers above oxff. Accessing them on thise platforms is dangerous. In some cases it leads to address wrapping to addresses below 0x100, which corrupts random unrelated registers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mfd: remove now redundant sh_mobile_sdhi.h headerGuennadi Liakhovetski2011-03-251-7/+0
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | sh: convert boards to use linux/mmc/sh_mobile_sdhi.hGuennadi Liakhovetski2011-03-255-5/+5
| | | | | | | | | | | | | | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.hGuennadi Liakhovetski2011-03-253-3/+3
| | | | | | | | | | | | | | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: convert the SDHI MMC driver from MFD to a platform driverGuennadi Liakhovetski2011-03-258-95/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFDGuennadi Liakhovetski2011-03-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_MFD_SH_MOBILE_SDHI Kconfig symbol is going to disappear soon, switch ecovec to using CONFIG_MMC_TMIO(_MODULE). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: split core functionality, DMA and MFD glueGuennadi Liakhovetski2011-03-256-1285/+1409
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to the one, used in MN5774 and other MN57xx controllers. These IP cores are included in many multifunction devices, in sh-mobile chips from Renesas, in the latter case they can also use DMA. Some sh-mobile implementations also have some other specialities, that MFD-based solutions don't have. This makes supporting all these features in a monolithic driver inconveniet and error-prone. This patch splits the driver into 3 parts: the core, the MFD glue and the DMA support. In case of a modular build, two modules will be built: mmc_tmio_core and mmc_tmio. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio: use PIO for short transfersGuennadi Liakhovetski2011-03-251-10/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows transferring of some requests in PIO and some in DMA mode and defaults to using DMA only for transfers longer than 8 bytes. This is especially useful with SDIO, which can have lots of 2- and 4-byte transfers, creating unnecessary high overhead, when executed in DMA. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: tmio-mmc: Improve DMA stability on sh-mobileGuennadi Liakhovetski2011-03-251-29/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some SDHI tmio implementations the order of DMA and command completion interrupts swaps, which leads to malfunction. This patch postpones DMA activation until the MMC command completion IRQ time. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: fix mmc_app_send_scr() for dma transferYoshihiro Shimoda2011-03-251-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is based on the commit "af51715079e7fb6b290e1881d63d815dc4de5011": * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. The driver may invalidate the mmc_card->csd when host driver uses dma. So this subroutine also needs a kmalloc buffer. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: sdhci-esdhc: enable esdhc on imx53Richard Zhu2011-03-251-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the NO INT in the Multi-BLK IO in SD/MMC, and Multi-BLK read in SDIO on imx53. The CMDTYPE of the CMD register (offset 0xE) should be set to "11" when the STOP CMD12 is issued on imx53 to abort one open ended multi-blk IO. Otherwise the TC INT wouldn't be generated. In exact block transfer, the controller doesn't complete the operations automatically as required at the end of the transfer and remains on hold if the abort command is not sent on imx53. As a result, the TC flag is not asserted and SW receives timeout exception. Set bit1 of Vendor Spec register to fix it. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: sdhci-esdhc: use writel/readl as general APIsRichard Zhu2011-03-252-8/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add one flag to indicate the GPIO CD/WP is enabled or not on imx platforms, and reuse the writel/readl as the general APIs for imx SOCs. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: sdhci: add the abort CMDTYPE bits definitionRichard Zhu2011-03-251-0/+1
| | | | | | | | | | | | | | | | | | | | | Add the abort CMDTYPE bits definition of command register (offset 0xE) Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from esdhcRichard Zhu2011-03-252-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | sdhci-esdhc-imx does not need SDHCI_QUIRK_NO_CARD_NO_RESET. Make it OF-specific. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: of_mmc_spi: Need to include irq.h and of_irq.hDavid Miller2011-03-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since these are the headers that provide irq_of_parse_and_map() and NO_IRQ. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: mmci: Add ARM variant with extended FIFOPawel Moll2011-03-251-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New IO FPGA implementation for Versatile Express boards contain MMCI (PL180) cell with FIFO extended to 128 words (512 bytes). Matt Waddel reports that this patch improves MMC performance on his vexpress system, and also fixes "mmcblk0: error -5 transferring data" errors. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Matt Waddel <matt.waddel@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: dw_mmc: set fixed burst in BMOD registerJaehoon Chung2011-03-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses the fixed burst bit when using an internal DMA controller. I found increased performance with IDMAC when this bit is set. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: use pci_dev->revisionSergei Shtylyov2011-03-252-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SDHCI driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it was not converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision). The newer VIA driver has similar code too. This patch converts both drivers to use the 'revision' field of 'struct pci_dev'. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Chris Ball <cjb@laptop.org>
| * | mmc: mmc_test: Remove set-but-unused variable.Chris Ball2011-03-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: drivers/mmc/card/mmc_test.c: In function ‘mmc_test_seq_perf’: drivers/mmc/card/mmc_test.c:1878:28: warning: variable ‘ts’ set but not used [-Wunused-but-set-variable] There's no reason to be calling timespec_sub() here, because mmc_test_print_avg_rate() is going to do that itself. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Adrian Hunter <adrian.hunter@nokia.com>
* | | Merge branch 'frv' of ↵Linus Torvalds2011-03-297-27/+76
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv * 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
| * | | FRV: Use generic show_interrupts()Thomas Gleixner2011-03-292-42/+4
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
| * | | FRV: Convert genirq namespaceThomas Gleixner2011-03-294-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert to new function names. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
OpenPOWER on IntegriCloud