summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* intel_idle: native hardware cpuidle driver for latest Intel processorsLen Brown2010-05-286-2/+486
| | | | | | | | | | | | | | | | | | | | | | This EXPERIMENTAL driver supersedes acpi_idle on Intel Atom Processors, Intel Core i3/i5/i7 Processors and associated Intel Xeon processors. It does not support the Intel Core2 processor or earlier. For kernels configured with ACPI, CONFIG_INTEL_IDLE=y allows intel_idle to probe before the ACPI processor driver. Booting with "intel_idle.max_cstate=0" disables intel_idle and the system will fall back on ACPI's "acpi_idle". Typical Linux distributions load ACPI processor module early, making CONFIG_INTEL_IDLE=m not easily useful on ACPI platforms. intel_idle probes all processors at module_init time. Processors that are hot-added later will be limited to using C1 in idle. Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT caseLen Brown2010-05-281-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit d306ebc28649b89877a22158fe0076f06cc46f60 (ACPI: Be in TS_POLLING state during mwait based C-state entry) fixed an important power & performance issue where ACPI c2 and c3 C-states were clearing TS_POLLING even when using MWAIT (ACPI_STATE_FFH). That bug had been causing us to receive redundant scheduling interrups when we had already been woken up by MONITOR/MWAIT. Following up on that... In the MWAIT case, we don't have to subsequently check need_resched(), as that c heck was there for the TS_POLLING-clearing case. Note that not only does the cpuidle calling function already check need_resched() before calling us, the low-level entry into monitor/mwait calls it twice -- guaranteeing that a write to the trigger address can not go un-noticed. Also, in this case, we don't have to set TS_POLLING when we wake, because we never cleared it. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venki@google.com>
* acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLINGLen Brown2010-05-271-9/+0
| | | | | | | | | api_pad exclusively uses MONITOR/MWAIT to sleep in idle, so it does not need the wakeup IPI during idle sleep that is provoked by clearing TS_POLLING. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Shaohua Li <shaohua.li@intel.com>
* sched: clarify commment for TS_POLLINGLen Brown2010-05-271-2/+2
| | | | | | | | | | | | | | | | TS_POLLING set tells the scheduler an idle_task will poll need_resched() to look for work. TS_POLLING clear tells resched_task() and wake_up_idle_cpu() that the remote CPU's idle_task is now sleeping in idle, and thus requires a reschedule interrupt notice work. Update the description of TS_POLLING to reflect how it works. "idle task polling need_resched, skip sending interrupt" Wordsmithing-by: Milton Miller <miltonm@bga.com> Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
* ACPI: allow a native cpuidle driver to displace ACPILen Brown2010-05-271-5/+6
| | | | | | | | | | | | | | | | The ACPI driver would fail probe when it found that another driver had previously registered with cpuidle. But this is a natural situation, as a native hardware cpuidle driver should be able to bind instead of ACPI, and the ACPI processor driver should be able to handle yielding control of C-states while still handling P-states and T-states. Add a KERN_DEBUG line showing when acpi_idle does successfully register. Signed-off-by: Len Brown <len.brown@intel.com>
* cpuidle: make cpuidle_curr_driver staticLen Brown2010-05-275-9/+22
| | | | | | | | | | | cpuidle_register_driver() sets cpuidle_curr_driver cpuidle_unregister_driver() clears cpuidle_curr_driver We should't expose cpuidle_curr_driver to potential modification except via these interfaces. So make it static and create cpuidle_get_driver() to observe it. Signed-off-by: Len Brown <len.brown@intel.com>
* cpuidle: add cpuidle_unregister_driver() error checkLen Brown2010-05-271-1/+4
| | | | | | | Assure that cpuidle_unregister_driver() will not clobber the registered driver if unregistered by somebody else. Signed-off-by: Len Brown <len.brown@intel.com>
* cpuidle: fail to register if !CONFIG_CPU_IDLELen Brown2010-05-271-3/+3
| | | | Signed-off-by: Len Brown <len.brown@intel.com>
* Linus 2.6.34v2.6.34Linus Torvalds2010-05-161-1/+1
|
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-05-165-81/+160
|\ | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: rtnetlink: make SR-IOV VF interface symmetric sctp: delete active ICMP proto unreachable timer when free transport tcp: fix MD5 (RFC2385) support
| * rtnetlink: make SR-IOV VF interface symmetricChris Wright2010-05-162-53/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we have a set of nested attributes: IFLA_VFINFO_LIST (NESTED) IFLA_VF_INFO (NESTED) IFLA_VF_MAC IFLA_VF_VLAN IFLA_VF_TX_RATE This allows a single set to operate on multiple attributes if desired. Among other things, it means a dump can be replayed to set state. The current interface has yet to be released, so this seems like something to consider for 2.6.34. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sctp: delete active ICMP proto unreachable timer when free transportWei Yongjun2010-05-161-0/+4
| | | | | | | | | | | | | | | | | | | | transport may be free before ICMP proto unreachable timer expire, so we should delete active ICMP proto unreachable timer when transport is going away. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tcp: fix MD5 (RFC2385) supportEric Dumazet2010-05-162-28/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by: Bhaskar Dutta <bhaskie@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2010-05-164-7/+21
|\ \ | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Oprofile: Fix Loongson irq handler MIPS: N32: Use compat version for sys_ppoll. MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1
| * | MIPS: Oprofile: Fix Loongson irq handlerWu Zhangjin2010-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interrupt enable bit for the performance counters is in the Control Register $24, not in the counter register. loongson2_perfcount_handler(), we need to use Reported-by: Xu Hengyang <hengyang@mail.ustc.edu.cn> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1198/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
| * | MIPS: N32: Use compat version for sys_ppoll.Chandrakala Chavva2010-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sys_ppoll() takes struct 'struct timespec'. This is different for the N32 and N64 ABIs. Use the compat version to do the proper conversions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
| * | MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1Shane McDonald2010-05-152-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds2010-05-151-0/+5
|\ \ \ | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check for read permission on src file in the clone ioctl
| * | | Btrfs: check for read permission on src file in the clone ioctlDan Rosenberg2010-05-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing code would have allowed you to clone a file that was only open for writing Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | | | lib/btree: fix possible NULL pointer dereferencekirjanov@gmail.com2010-05-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mempool_alloc() can return null in atomic case. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: at91_mci: modify cache flush routinesNicolas Ferre2010-05-151-1/+1
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we were using an internal dma flushing routine, this patch changes to the DMA API flush_kernel_dcache_page(). Driver is able to compile now. [akpm@linux-foundation.org: flush_kernel_dcache_page() comes before kunmap_atomic()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2010-05-158-26/+49
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: JFS: Free sbi memory in error path fs/sysv: dereferencing ERR_PTR() Fix double-free in logfs Fix the regression created by "set S_DEAD on unlink()..." commit
| * | | JFS: Free sbi memory in error pathJan Blunck2010-05-151-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I spotted the missing kfree() while removing the BKL. [akpm@linux-foundation.org: avoid multiple returns so it doesn't happen again] Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | fs/sysv: dereferencing ERR_PTR()Dan Carpenter2010-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I moved the dir_put_page() inside the if condition so we don't dereference "page", if it's an ERR_PTR(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | Fix double-free in logfsAl Viro2010-05-151-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | iput() is needed *until* we'd done successful d_alloc_root() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | Fix the regression created by "set S_DEAD on unlink()..." commitAl Viro2010-05-155-11/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) i_flags simply doesn't work for mount/unlink race prevention; we may have many links to file and rm on one of those obviously shouldn't prevent bind on top of another later on. To fix it right way we need to mark _dentry_ as unsuitable for mounting upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and i_mutex on the inode in question. Set it (with dont_mount(dentry)) in unlink/rmdir/etc., check (with cant_mount(dentry)) in places in namespace.c that used to check for S_DEAD. Setting S_DEAD is still needed in places where we used to set it (for directories getting killed), since we rely on it for readdir/rmdir race prevention. 2) rename()/mount() protection has another bogosity - we unhash the target before we'd checked that it's not a mountpoint. Fixed. 3) ancient bogosity in pivot_root() - we locked i_mutex on the right directory, but checked S_DEAD on the different (and wrong) one. Noticed and fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2010-05-151-0/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Add a fallback to the reference relocation symbol
| * | | | perf record: Add a fallback to the reference relocation symbolArnaldo Carvalho de Melo2010-05-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually "_text" is enough, but I received reports that its not always available, so fallback to "_stext" for the symbol we use to check if we need to apply any relocation to all the symbols in the kernel symtab, for when, for instance, kexec is being used. Reported-by: Darren Hart <dvhltc@us.ibm.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-05-1412-35/+99
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes ARM: 6125/1: ARM TWD: move TWD registers to common header ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops ARM: 6106/1: Implement copy_to_user_page() for noMMU ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
| * | | | | ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixesSrinidhi Kasagar2010-05-122-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the build failures seen when building mpcore_wdt and it also removes the nonexistent ARM_MPCORE_PLATFORM dependency, instead make it dependent on HAVE_ARM_TWD. Also this fixes spinlock usage appropriately. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 6125/1: ARM TWD: move TWD registers to common headerSrinidhi Kasagar2010-05-122-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the TWD register set of MPcore to a common existing file so that watchdog driver can access it Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabledCatalin Marinas2010-05-082-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds the ENDPROC declarations for the __copy_to_user_std and __clear_user_std functions. Without these, the compiler generates BXL to ARM when compiling the kernel in Thumb-2 mode. Reported-by: Kyungmin Park <kmpark@infradead.org> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMPCatalin Marinas2010-05-084-1/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The standard I-cache Invalidate All (ICIALLU) and Branch Predication Invalidate All (BPIALL) operations are not automatically broadcast to the other CPUs in an ARMv7 MP system. The patch adds the Inner Shareable variants, ICIALLUIS and BPIALLIS, if ARMv7 and SMP. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache opsCatalin Marinas2010-05-081-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Snoop Control Unit on the ARM11MPCore hardware does not detect the cache operations and the dma_cache_maint*() functions may leave stale cache entries on other CPUs. The solution implemented in this patch performs a Read or Write For Ownership in the ARMv6 DMA cache maintenance functions. These LDR/STR instructions change the cache line state to shared or exclusive so that the cache maintenance operation has the desired effect. Tested-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 6106/1: Implement copy_to_user_page() for noMMUCatalin Marinas2010-05-081-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7959722 introduced calls to copy_(to|from)_user_page() from access_process_vm() in mm/nommu.c. The copy_to_user_page() was not implemented on noMMU ARM. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.cCatalin Marinas2010-05-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 31aa8fd6 introduced the __arm_ioremap_caller() function but the nommu.c version did not have the _caller suffix. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2010-05-141-0/+4
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mrst: Don't blindly access extended config space
| * | | | | | x86, mrst: Don't blindly access extended config spaceH. Peter Anvin2010-05-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not blindly access extended configuration space unless we actively know we're on a Moorestown platform. The fixed-size BAR capability lives in the extended configuration space, and thus is not applicable if the configuration space isn't appropriately sized. This fixes booting certain VMware configurations with CONFIG_MRST=y. Moorestown will add a fake PCI-X 266 capability to advertise the presence of extended configuration space. Reported-and-tested-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <AANLkTiltKUa3TrKR1M51eGw8FLNoQJSLT0k0_K5X3-OJ@mail.gmail.com>
* | | | | | | profile: fix stats and data leakageHugh Dickins2010-05-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the kernel is large or the profiling step small, /proc/profile leaks data and readprofile shows silly stats, until readprofile -r has reset the buffer: clear the prof_buffer when it is vmalloc()ed. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | hughd: update email addressHugh Dickins2010-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My old address will shut down in a couple of weeks: update the tree. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2010-05-144-6/+18
|\ \ \ \ \ \ \ | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments x86, k8: Fix build error when K8_NB is disabled x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRs x86: Fix fake apicid to node mapping for numa emulation
| * | | | | | x86, cacheinfo: Turn off L3 cache index disable feature in virtualized ↵Frank Arnold2010-05-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | environments When running a quest kernel on xen we get: BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x2ca/0x3df PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Tainted: G W 2.6.34-rc3 #1 /HVM domU RIP: 0010:[<ffffffff8142f2fb>] [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x 2ca/0x3df RSP: 0018:ffff880002203e08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000060 RDX: 0000000000000000 RSI: 0000000000000040 RDI: 0000000000000000 RBP: ffff880002203ed8 R08: 00000000000017c0 R09: ffff880002203e38 R10: ffff8800023d5d40 R11: ffffffff81a01e28 R12: ffff880187e6f5c0 R13: ffff880002203e34 R14: ffff880002203e58 R15: ffff880002203e68 FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000038 CR3: 0000000001a3c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffffffff81a00000, task ffffffff81a44020) Stack: ffffffff810d7ecb ffff880002203e20 ffffffff81059140 ffff880002203e30 <0> ffffffff810d7ec9 0000000002203e40 000000000050d140 ffff880002203e70 <0> 0000000002008140 0000000000000086 ffff880040020140 ffffffff81068b8b Call Trace: <IRQ> [<ffffffff810d7ecb>] ? sync_supers_timer_fn+0x0/0x1c [<ffffffff81059140>] ? mod_timer+0x23/0x25 [<ffffffff810d7ec9>] ? arm_supers_timer+0x34/0x36 [<ffffffff81068b8b>] ? hrtimer_get_next_event+0xa7/0xc3 [<ffffffff81058e85>] ? get_next_timer_interrupt+0x19a/0x20d [<ffffffff8142fa23>] get_cpu_leaves+0x5c/0x232 [<ffffffff8106a7b1>] ? sched_clock_local+0x1c/0x82 [<ffffffff8106a9a0>] ? sched_clock_tick+0x75/0x7a [<ffffffff8107748c>] generic_smp_call_function_single_interrupt+0xae/0xd0 [<ffffffff8101f6ef>] smp_call_function_single_interrupt+0x18/0x27 [<ffffffff8100a773>] call_function_single_interrupt+0x13/0x20 <EOI> [<ffffffff8143c468>] ? notifier_call_chain+0x14/0x63 [<ffffffff810295c6>] ? native_safe_halt+0xc/0xd [<ffffffff810114eb>] ? default_idle+0x36/0x53 [<ffffffff81008c22>] cpu_idle+0xaa/0xe4 [<ffffffff81423a9a>] rest_init+0x7e/0x80 [<ffffffff81b10dd2>] start_kernel+0x40e/0x419 [<ffffffff81b102c8>] x86_64_start_reservations+0xb3/0xb7 [<ffffffff81b103c4>] x86_64_start_kernel+0xf8/0x107 Code: 14 d5 40 ff ae 81 8b 14 02 31 c0 3b 15 47 1c 8b 00 7d 0e 48 8b 05 36 1c 8b 00 48 63 d2 48 8b 04 d0 c7 85 5c ff ff ff 00 00 00 00 <8b> 70 38 48 8d 8d 5c ff ff ff 48 8b 78 10 ba c4 01 00 00 e8 eb RIP [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x2ca/0x3df RSP <ffff880002203e08> CR2: 0000000000000038 ---[ end trace a7919e7f17c0a726 ]--- The L3 cache index disable feature of AMD CPUs has to be disabled if the kernel is running as guest on top of a hypervisor because northbridge devices are not available to the guest. Currently, this fixes a boot crash on top of Xen. In the future this will become an issue on KVM as well. Check if northbridge devices are present and do not enable the feature if there are none. [ hpa: backported to 2.6.34 ] Signed-off-by: Frank Arnold <frank.arnold@amd.com> LKML-Reference: <1271945222-5283-3-git-send-email-bp@amd64.org> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
| * | | | | | x86, k8: Fix build error when K8_NB is disabledBorislav Petkov2010-05-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | K8_NB depends on PCI and when the last is disabled (allnoconfig) we fail at the final linking stage due to missing exported num_k8_northbridges. Add a header stub for that. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100503183036.GJ26107@aftab> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
| * | | | | | x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRsAndreas Herrmann2010-05-131-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If host CPU is exposed to a guest the OSVW MSRs are not guaranteed to be present and a GP fault occurs. Thus checking the feature flag is essential. Cc: <stable@kernel.org> # .32.x .33.x Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100427101348.GC4489@alberich.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
| * | | | | | x86: Fix fake apicid to node mapping for numa emulationDavid Rientjes2010-05-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With NUMA emulation, it's possible for a single cpu to be bound to multiple nodes since more than one may have affinity if allocated on a physical node that is local to the cpu. APIC ids must therefore be mapped to the lowest node ids to maintain generic kernel use of functions such as cpu_to_node() that determine device affinity. For example, if a device has proximity to physical node 1, for instance, and a cpu happens to be mapped to a higher emulated node id 8, the proximity may not be correctly determined by comparison in generic code even though the cpu may be truly local and allocated on physical node 1. When this happens, the true topology of the machine isn't accurately represented in the emulated environment; although this isn't critical to the system's uptime, any generic code that is NUMA aware benefits from the physical topology being accurately represented. This can affect any system that maps multiple APIC ids to a single node and is booted with numa=fake=N where N is greater than the number of physical nodes. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <alpine.DEB.2.00.1005060224140.19473@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | | | | Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notifyLinus Torvalds2010-05-142-8/+10
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.infradead.org/users/eparis/notify: inotify: don't leak user struct on inotify release inotify: race use after free/double free in inotify inode marks inotify: clean up the inotify_add_watch out path Inotify: undefined reference to `anon_inode_getfd' Manual merge to remove duplicate "select ANON_INODES" from Kconfig file
| * | | | | | | inotify: don't leak user struct on inotify releasePavel Emelyanov2010-05-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | inotify_new_group() receives a get_uid-ed user_struct and saves the reference on group->inotify_data.user. The problem is that free_uid() is never called on it. Issue seem to be introduced by 63c882a0 (inotify: reimplement inotify using fsnotify) after 2.6.30. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Eric Paris <eparis@parisplace.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Paris <eparis@redhat.com>
| * | | | | | | inotify: race use after free/double free in inotify inode marksEric Paris2010-05-141-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race in the inotify add/rm watch code. A task can find and remove a mark which doesn't have all of it's references. This can result in a use after free/double free situation. Task A Task B ------------ ----------- inotify_new_watch() allocate a mark (refcnt == 1) add it to the idr inotify_rm_watch() inotify_remove_from_idr() fsnotify_put_mark() refcnt hits 0, free take reference because we are on idr [at this point it is a use after free] [time goes on] refcnt may hit 0 again, double free The fix is to take the reference BEFORE the object can be found in the idr. Signed-off-by: Eric Paris <eparis@redhat.com> Cc: <stable@kernel.org>
| * | | | | | | inotify: clean up the inotify_add_watch out pathEric Paris2010-05-141-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | inotify_add_watch explictly frees the unused inode mark, but it can just use the generic code. Just do that. Signed-off-by: Eric Paris <eparis@redhat.com>
| * | | | | | | Inotify: undefined reference to `anon_inode_getfd'Russell King2010-05-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: fs/built-in.o: In function `sys_inotify_init1': summary.c:(.text+0x347a4): undefined reference to `anon_inode_getfd' found by kautobuild with arms bcmring_defconfig, which ends up with INOTIFY_USER enabled (through the 'default y') but leaves ANON_INODES unset. However, inotify_user.c uses anon_inode_getfd(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Paris <eparis@redhat.com>
OpenPOWER on IntegriCloud