summaryrefslogtreecommitdiffstats
path: root/usr
diff options
context:
space:
mode:
Diffstat (limited to 'usr')
-rw-r--r--usr/Makefile6
-rw-r--r--usr/initramfs_data.S21
-rw-r--r--usr/initramfs_data.bz2.S29
-rw-r--r--usr/initramfs_data.gz.S29
-rw-r--r--usr/initramfs_data.lzma.S29
-rw-r--r--usr/initramfs_data.lzo.S29
6 files changed, 18 insertions, 125 deletions
diff --git a/usr/Makefile b/usr/Makefile
index 6b4b6da..6faa444 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -18,13 +18,15 @@ suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZMA) = .lzma
# Lzo
suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZO) = .lzo
+AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/initramfs_data.cpio$(suffix_y)"
+
# Generate builtin.o based on initramfs_data.o
-obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o
+obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o
# initramfs_data.o contains the compressed initramfs_data.cpio image.
# The image is included using .incbin, a dependency which is not
# tracked automatically.
-$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
+$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
#####
# Generate the initramfs cpio archive
diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S
index 7c6973d..b9efed5 100644
--- a/usr/initramfs_data.S
+++ b/usr/initramfs_data.S
@@ -11,11 +11,7 @@
-T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
ld -m elf_i386 -r -o built-in.o initramfs_data.o
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
+ For including the .init.ramfs sections, see include/asm-generic/vmlinux.lds.
The above example is for i386 - the parameters vary from architectures.
Eventually look up LDFLAGS_BLOB in an older version of the
@@ -25,6 +21,17 @@ SECTIONS
in the ELF header, as required by certain architectures.
*/
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio"
+#include <linux/stringify.h>
+.section .init.ramfs,"a"
+__irf_start:
+.incbin __stringify(INITRAMFS_IMAGE)
+__irf_end:
+.section .init.ramfs.info,"a"
+.globl __initramfs_size
+__initramfs_size:
+#ifdef CONFIG_32BIT
+ .long __irf_end - __irf_start
+#else
+ .quad __irf_end - __irf_start
+#endif
diff --git a/usr/initramfs_data.bz2.S b/usr/initramfs_data.bz2.S
deleted file mode 100644
index bc54d09..0000000
--- a/usr/initramfs_data.bz2.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.bz2"
diff --git a/usr/initramfs_data.gz.S b/usr/initramfs_data.gz.S
deleted file mode 100644
index 890c8dd..0000000
--- a/usr/initramfs_data.gz.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.gz"
diff --git a/usr/initramfs_data.lzma.S b/usr/initramfs_data.lzma.S
deleted file mode 100644
index e11469e..0000000
--- a/usr/initramfs_data.lzma.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.lzma"
diff --git a/usr/initramfs_data.lzo.S b/usr/initramfs_data.lzo.S
deleted file mode 100644
index 5921190..0000000
--- a/usr/initramfs_data.lzo.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.lzo"
OpenPOWER on IntegriCloud