diff options
Diffstat (limited to 'tools')
107 files changed, 16678 insertions, 1198 deletions
diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt index 6f5a4986..85c5f02 100644 --- a/tools/perf/Documentation/perf-annotate.txt +++ b/tools/perf/Documentation/perf-annotate.txt @@ -66,6 +66,12 @@ OPTIONS used. This interfaces starts by centering on the line with more samples, TAB/UNTAB cycles through the lines with more samples. +-c:: +--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can + be provided as a comma-separated list with no space: 0,1. Ranges of + CPUs are specified with -: 0-2. Default is to report samples on all + CPUs. + SEE ALSO -------- linkperf:perf-record[1], linkperf:perf-report[1] diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt index 02bafce..2780d9c 100644 --- a/tools/perf/Documentation/perf-probe.txt +++ b/tools/perf/Documentation/perf-probe.txt @@ -34,9 +34,11 @@ OPTIONS Specify vmlinux path which has debuginfo (Dwarf binary). -m:: ---module=MODNAME:: +--module=MODNAME|PATH:: Specify module name in which perf-probe searches probe points - or lines. + or lines. If a path of module file is passed, perf-probe + treat it as an offline module (this means you can add a probe on + a module which has not been loaded yet). -s:: --source=PATH:: diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt index 8ba03d6..04253c0 100644 --- a/tools/perf/Documentation/perf-report.txt +++ b/tools/perf/Documentation/perf-report.txt @@ -80,15 +80,24 @@ OPTIONS --dump-raw-trace:: Dump raw trace in ASCII. --g [type,min]:: +-g [type,min,order]:: --call-graph:: - Display call chains using type and min percent threshold. + Display call chains using type, min percent threshold and order. type can be either: - flat: single column, linear exposure of call chains. - graph: use a graph tree, displaying absolute overhead rates. - fractal: like graph, but displays relative rates. Each branch of the tree is considered as a new profiled object. + - Default: fractal,0.5. + + order can be either: + - callee: callee based call graph. + - caller: inverted caller based call graph. + + Default: fractal,0.5,callee. + +-G:: +--inverted:: + alias for inverted caller based call graph. --pretty=<key>:: Pretty printing style. key: normal, raw @@ -119,6 +128,12 @@ OPTIONS --symfs=<directory>:: Look for files with symbols relative to this directory. +-c:: +--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can + be provided as a comma-separated list with no space: 0,1. Ranges of + CPUs are specified with -: 0-2. Default is to report samples on all + CPUs. + SEE ALSO -------- linkperf:perf-stat[1] diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt index 86c87e2..db01786 100644 --- a/tools/perf/Documentation/perf-script.txt +++ b/tools/perf/Documentation/perf-script.txt @@ -115,10 +115,10 @@ OPTIONS -f:: --fields:: Comma separated list of fields to print. Options are: - comm, tid, pid, time, cpu, event, trace, sym. Field - list can be prepended with the type, trace, sw or hw, + comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr. + Field list can be prepended with the type, trace, sw or hw, to indicate to which event type the field list applies. - e.g., -f sw:comm,tid,time,sym and -f trace:time,cpu,trace + e.g., -f sw:comm,tid,time,ip,sym and -f trace:time,cpu,trace perf script -f <fields> @@ -132,17 +132,17 @@ OPTIONS The arguments are processed in the order received. A later usage can reset a prior request. e.g.: - -f trace: -f comm,tid,time,sym + -f trace: -f comm,tid,time,ip,sym The first -f suppresses trace events (field list is ""), but then the - second invocation sets the fields to comm,tid,time,sym. In this case a + second invocation sets the fields to comm,tid,time,ip,sym. In this case a warning is given to the user: "Overriding previous field request for all events." Alternativey, consider the order: - -f comm,tid,time,sym -f trace: + -f comm,tid,time,ip,sym -f trace: The first -f sets the fields for all events and the second -f suppresses trace events. The user is given a warning message about @@ -182,6 +182,12 @@ OPTIONS --hide-call-graph:: When printing symbols do not display call chain. +-c:: +--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can + be provided as a comma-separated list with no space: 0,1. Ranges of + CPUs are specified with -: 0-2. Default is to report samples on all + CPUs. + SEE ALSO -------- linkperf:perf-record[1], linkperf:perf-script-perl[1], diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 940257b..56d62d3 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -52,7 +52,10 @@ ifeq ($(ARCH),i386) endif ifeq ($(ARCH),x86_64) ARCH := x86 - IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -xc - | tail -n 1) + IS_X86_64 := 0 + ifeq (, $(findstring m32,$(EXTRA_CFLAGS))) + IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -xc - | tail -n 1) + endif ifeq (${IS_X86_64}, 1) RAW_ARCH := x86_64 ARCH_CFLAGS := -DARCH_X86_64 @@ -279,6 +282,7 @@ LIB_H += util/thread.h LIB_H += util/thread_map.h LIB_H += util/trace-event.h LIB_H += util/probe-finder.h +LIB_H += util/dwarf-aux.h LIB_H += util/probe-event.h LIB_H += util/pstack.h LIB_H += util/cpumap.h @@ -435,6 +439,7 @@ else BASIC_CFLAGS += -DDWARF_SUPPORT EXTLIBS += -lelf -ldw LIB_OBJS += $(OUTPUT)util/probe-finder.o + LIB_OBJS += $(OUTPUT)util/dwarf-aux.o endif # PERF_HAVE_DWARF_REGS endif # NO_DWARF diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 7b139e1..555aefd 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -28,6 +28,8 @@ #include "util/hist.h" #include "util/session.h" +#include <linux/bitmap.h> + static char const *input_name = "perf.data"; static bool force, use_tui, use_stdio; @@ -38,6 +40,9 @@ static bool print_line; static const char *sym_hist_filter; +static const char *cpu_list; +static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS); + static int perf_evlist__add_sample(struct perf_evlist *evlist, struct perf_sample *sample, struct perf_evsel *evsel, @@ -90,6 +95,9 @@ static int process_sample_event(union perf_event *event, return -1; } + if (cpu_list && !test_bit(sample->cpu, cpu_bitmap)) + return 0; + if (!al.filtered && perf_evlist__add_sample(session->evlist, sample, evsel, &al)) { pr_warning("problem incrementing symbol count, " @@ -177,6 +185,12 @@ static int __cmd_annotate(void) if (session == NULL) return -ENOMEM; + if (cpu_list) { + ret = perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap); + if (ret) + goto out_delete; + } + ret = perf_session__process_events(session, &event_ops); if (ret) goto out_delete; @@ -252,6 +266,7 @@ static const struct option options[] = { "print matching source lines (may be slow)"), OPT_BOOLEAN('P', "full-paths", &full_paths, "Don't shorten the displayed pathnames"), + OPT_STRING('c', "cpu", &cpu_list, "cpu", "list of cpus to profile"), OPT_END() }; diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c index 2c0e64d..5f2a5c7 100644 --- a/tools/perf/builtin-probe.c +++ b/tools/perf/builtin-probe.c @@ -242,7 +242,8 @@ static const struct option options[] = { OPT_STRING('s', "source", &symbol_conf.source_prefix, "directory", "path to kernel source"), OPT_STRING('m', "module", ¶ms.target_module, - "modname", "target module name"), + "modname|path", + "target module name (for online) or path (for offline)"), #endif OPT__DRY_RUN(&probe_event_dry_run), OPT_INTEGER('\0', "max-probes", ¶ms.max_probe_points, diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 8e2c857..80dc5b7 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -740,7 +740,7 @@ static bool force, append_file; const struct option record_options[] = { OPT_CALLBACK('e', "event", &evsel_list, "event", "event selector. use 'perf list' to list available events", - parse_events), + parse_events_option), OPT_CALLBACK(0, "filter", &evsel_list, "filter", "event filter", parse_filter), OPT_INTEGER('p', "pid", &target_pid, diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 287a173..f854efd 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -33,6 +33,8 @@ #include "util/sort.h" #include "util/hist.h" +#include <linux/bitmap.h> + static char const *input_name = "perf.data"; static bool force, use_tui, use_stdio; @@ -45,9 +47,13 @@ static struct perf_read_values show_threads_values; static const char default_pretty_printing_style[] = "normal"; static const char *pretty_printing_style = default_pretty_printing_style; -static char callchain_default_opt[] = "fractal,0.5"; +static char callchain_default_opt[] = "fractal,0.5,callee"; +static bool inverted_callchain; static symbol_filter_t annotate_init; +static const char *cpu_list; +static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS); + static int perf_session__add_hist_entry(struct perf_session *session, struct addr_location *al, struct perf_sample *sample, @@ -116,6 +122,9 @@ static int process_sample_event(union perf_event *event, if (al.filtered || (hide_unresolved && al.sym == NULL)) return 0; + if (cpu_list && !test_bit(sample->cpu, cpu_bitmap)) + return 0; + if (al.map != NULL) al.map->dso->hit = 1; @@ -262,6 +271,12 @@ static int __cmd_report(void) if (session == NULL) return -ENOMEM; + if (cpu_list) { + ret = perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap); + if (ret) + goto out_delete; + } + if (show_threads) perf_read_values_init(&show_threads_values); @@ -386,13 +401,29 @@ parse_callchain_opt(const struct option *opt __used, const char *arg, if (!tok) goto setup; - tok2 = strtok(NULL, ","); callchain_param.min_percent = strtod(tok, &endptr); if (tok == endptr) return -1; - if (tok2) + /* get the print limit */ + tok2 = strtok(NULL, ","); + if (!tok2) + goto setup; + + if (tok2[0] != 'c') { callchain_param.print_limit = strtod(tok2, &endptr); + tok2 = strtok(NULL, ","); + if (!tok2) + goto setup; + } + + /* get the call chain order */ + if (!strcmp(tok2, "caller")) + callchain_param.order = ORDER_CALLER; + else if (!strcmp(tok2, "callee")) + callchain_param.order = ORDER_CALLEE; + else + return -1; setup: if (callchain_register_param(&callchain_param) < 0) { fprintf(stderr, "Can't register callchain params\n"); @@ -436,9 +467,10 @@ static const struct option options[] = { "regex filter to identify parent, see: '--sort parent'"), OPT_BOOLEAN('x', "exclude-other", &symbol_conf.exclude_other, "Only display entries with parent-match"), - OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent", - "Display callchains using output_type (graph, flat, fractal, or none) and min percent threshold. " - "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt), + OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent, call_order", + "Display callchains using output_type (graph, flat, fractal, or none) , min percent threshold and callchain order. " + "Default: fractal,0.5,callee", &parse_callchain_opt, callchain_default_opt), + OPT_BOOLEAN('G', "inverted", &inverted_callchain, "alias for inverted call graph"), OPT_STRING('d', "dsos", &symbol_conf.dso_list_str, "dso[,dso...]", "only consider symbols in these dsos"), OPT_STRING('C', "comms", &symbol_conf.comm_list_str, "comm[,comm...]", @@ -455,6 +487,7 @@ static const struct option options[] = { "Only display entries resolved to a symbol"), OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory", "Look for files with symbols relative to this directory"), + OPT_STRING('c', "cpu", &cpu_list, "cpu", "list of cpus to profile"), OPT_END() }; @@ -467,6 +500,9 @@ int cmd_report(int argc, const char **argv, const char *prefix __used) else if (use_tui) use_browser = 1; + if (inverted_callchain) + callchain_param.order = ORDER_CALLER; + if (strcmp(input_name, "-") != 0) setup_browser(true); else @@ -504,7 +540,14 @@ int cmd_report(int argc, const char **argv, const char *prefix __used) if (parent_pattern != default_parent_pattern) { if (sort_dimension__add("parent") < 0) return -1; - sort_parent.elide = 1; + + /* + * Only show the parent fields if we explicitly + * sort that way. If we only use parent machinery + * for filtering, we don't want it. + */ + if (!strstr(sort_order, "parent")) + sort_parent.elide = 1; } else symbol_conf.exclude_other = false; diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index 22747de..09024ec 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -13,6 +13,7 @@ #include "util/util.h" #include "util/evlist.h" #include "util/evsel.h" +#include <linux/bitmap.h> static char const *script_name; static char const *generate_script_lang; @@ -21,6 +22,8 @@ static u64 last_timestamp; static u64 nr_unordered; extern const struct option record_options[]; static bool no_callchain; +static const char *cpu_list; +static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS); enum perf_output_field { PERF_OUTPUT_COMM = 1U << 0, @@ -30,7 +33,10 @@ enum perf_output_field { PERF_OUTPUT_CPU = 1U << 4, PERF_OUTPUT_EVNAME = 1U << 5, PERF_OUTPUT_TRACE = 1U << 6, - PERF_OUTPUT_SYM = 1U << 7, + PERF_OUTPUT_IP = 1U << 7, + PERF_OUTPUT_SYM = 1U << 8, + PERF_OUTPUT_DSO = 1U << 9, + PERF_OUTPUT_ADDR = 1U << 10, }; struct output_option { @@ -44,7 +50,10 @@ struct output_option { {.str = "cpu", .field = PERF_OUTPUT_CPU}, {.str = "event", .field = PERF_OUTPUT_EVNAME}, {.str = "trace", .field = PERF_OUTPUT_TRACE}, + {.str = "ip", .field = PERF_OUTPUT_IP}, {.str = "sym", .field = PERF_OUTPUT_SYM}, + {.str = "dso", .field = PERF_OUTPUT_DSO}, + {.str = "addr", .field = PERF_OUTPUT_ADDR}, }; /* default set to maintain compatibility with current format */ @@ -60,7 +69,8 @@ static struct { .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | - PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM, + PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP | + PERF_OUTPUT_SYM | PERF_OUTPUT_DSO, .invalid_fields = PERF_OUTPUT_TRACE, }, @@ -70,7 +80,8 @@ static struct { .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | - PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM, + PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP | + PERF_OUTPUT_SYM | PERF_OUTPUT_DSO, .invalid_fields = PERF_OUTPUT_TRACE, }, @@ -88,7 +99,8 @@ static struct { .fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | - PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM, + PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP | + PERF_OUTPUT_SYM | PERF_OUTPUT_DSO, .invalid_fields = PERF_OUTPUT_TRACE, }, @@ -157,9 +169,9 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel, !perf_session__has_traces(session, "record -R")) return -EINVAL; - if (PRINT_FIELD(SYM)) { + if (PRINT_FIELD(IP)) { if (perf_event_attr__check_stype(attr, PERF_SAMPLE_IP, "IP", - PERF_OUTPUT_SYM)) + PERF_OUTPUT_IP)) return -EINVAL; if (!no_callchain && @@ -167,6 +179,24 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel, symbol_conf.use_callchain = false; } + if (PRINT_FIELD(ADDR) && + perf_event_attr__check_stype(attr, PERF_SAMPLE_ADDR, "ADDR", + PERF_OUTPUT_ADDR)) + return -EINVAL; + + if (PRINT_FIELD(SYM) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR)) { + pr_err("Display of symbols requested but neither sample IP nor " + "sample address\nis selected. Hence, no addresses to convert " + "to symbols.\n"); + return -EINVAL; + } + if (PRINT_FIELD(DSO) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR)) { + pr_err("Display of DSO requested but neither sample IP nor " + "sample address\nis selected. Hence, no addresses to convert " + "to DSO.\n"); + return -EINVAL; + } + if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) && perf_event_attr__check_stype(attr, PERF_SAMPLE_TID, "TID", PERF_OUTPUT_TID|PERF_OUTPUT_PID)) @@ -230,7 +260,7 @@ static void print_sample_start(struct perf_sample *sample, if (PRINT_FIELD(COMM)) { if (latency_format) printf("%8.8s ", thread->comm); - else if (PRINT_FIELD(SYM) && symbol_conf.use_callchain) + else if (PRINT_FIELD(IP) && symbol_conf.use_callchain) printf("%s ", thread->comm); else printf("%16s ", thread->comm); @@ -271,6 +301,63 @@ static void print_sample_start(struct perf_sample *sample, } } +static bool sample_addr_correlates_sym(struct perf_event_attr *attr) +{ + if ((attr->type == PERF_TYPE_SOFTWARE) && + ((attr->config == PERF_COUNT_SW_PAGE_FAULTS) || + (attr->config == PERF_COUNT_SW_PAGE_FAULTS_MIN) || + (attr->config == PERF_COUNT_SW_PAGE_FAULTS_MAJ))) + return true; + + return false; +} + +static void print_sample_addr(union perf_event *event, + struct perf_sample *sample, + struct perf_session *session, + struct thread *thread, + struct perf_event_attr *attr) +{ + struct addr_location al; + u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK; + const char *symname, *dsoname; + + printf("%16" PRIx64, sample->addr); + + if (!sample_addr_correlates_sym(attr)) + return; + + thread__find_addr_map(thread, session, cpumode, MAP__FUNCTION, + event->ip.pid, sample->addr, &al); + if (!al.map) + thread__find_addr_map(thread, session, cpumode, MAP__VARIABLE, + event->ip.pid, sample->addr, &al); + + al.cpu = sample->cpu; + al.sym = NULL; + + if (al.map) + al.sym = map__find_symbol(al.map, al.addr, NULL); + + if (PRINT_FIELD(SYM)) { + if (al.sym && al.sym->name) + symname = al.sym->name; + else + symname = ""; + + printf(" %16s", symname); + } + + if (PRINT_FIELD(DSO)) { + if (al.map && al.map->dso && al.map->dso->name) + dsoname = al.map->dso->name; + else + dsoname = ""; + + printf(" (%s)", dsoname); + } +} + static void process_event(union perf_event *event __unused, struct perf_sample *sample, struct perf_evsel *evsel, @@ -288,12 +375,16 @@ static void process_event(union perf_event *event __unused, print_trace_event(sample->cpu, sample->raw_data, sample->raw_size); - if (PRINT_FIELD(SYM)) { + if (PRINT_FIELD(ADDR)) + print_sample_addr(event, sample, session, thread, attr); + + if (PRINT_FIELD(IP)) { if (!symbol_conf.use_callchain) printf(" "); else printf("\n"); - perf_session__print_symbols(event, sample, session); + perf_session__print_ip(event, sample, session, + PRINT_FIELD(SYM), PRINT_FIELD(DSO)); } printf("\n"); @@ -365,6 +456,10 @@ static int process_sample_event(union perf_event *event, last_timestamp = sample->time; return 0; } + + if (cpu_list && !test_bit(sample->cpu, cpu_bitmap)) + return 0; + scripting_ops->process_event(event, sample, evsel, session, thread); session->hists.stats.total_period += sample->period; @@ -985,8 +1080,9 @@ static const struct option options[] = { OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory", "Look for files with symbols relative to this directory"), OPT_CALLBACK('f', "fields", NULL, "str", - "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,sym", + "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr", parse_output_fields), + OPT_STRING('c', "cpu", &cpu_list, "cpu", "list of cpus to profile"), OPT_END() }; @@ -1167,6 +1263,11 @@ int cmd_script(int argc, const char **argv, const char *prefix __used) if (session == NULL) return -ENOMEM; + if (cpu_list) { + if (perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap)) + return -1; + } + if (!no_callchain) symbol_conf.use_callchain = true; else diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index a9f0671..1ad04ce 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -61,6 +61,8 @@ #include <locale.h> #define DEFAULT_SEPARATOR " " +#define CNTR_NOT_SUPPORTED "<not supported>" +#define CNTR_NOT_COUNTED "<not counted>" static struct perf_event_attr default_attrs[] = { @@ -448,6 +450,7 @@ static int run_perf_stat(int argc __used, const char **argv) if (verbose) ui__warning("%s event is not supported by the kernel.\n", event_name(counter)); + counter->supported = false; continue; } @@ -466,6 +469,7 @@ static int run_perf_stat(int argc __used, const char **argv) die("Not all events could be opened.\n"); return -1; } + counter->supported = true; } if (perf_evlist__set_filters(evsel_list)) { @@ -513,7 +517,10 @@ static void print_noise_pct(double total, double avg) if (avg) pct = 100.0*total/avg; - fprintf(stderr, " ( +-%6.2f%% )", pct); + if (csv_output) + fprintf(stderr, "%s%.2f%%", csv_sep, pct); + else + fprintf(stderr, " ( +-%6.2f%% )", pct); } static void print_noise(struct perf_evsel *evsel, double avg) @@ -861,7 +868,7 @@ static void print_counter_aggr(struct perf_evsel *counter) if (scaled == -1) { fprintf(stderr, "%*s%s%*s", csv_output ? 0 : 18, - "<not counted>", + counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, csv_sep, csv_output ? 0 : -24, event_name(counter)); @@ -878,13 +885,13 @@ static void print_counter_aggr(struct perf_evsel *counter) else abs_printout(-1, counter, avg); + print_noise(counter, avg); + if (csv_output) { fputc('\n', stderr); return; } - print_noise(counter, avg); - if (scaled) { double avg_enabled, avg_running; @@ -914,7 +921,8 @@ static void print_counter(struct perf_evsel *counter) csv_output ? 0 : -4, evsel_list->cpus->map[cpu], csv_sep, csv_output ? 0 : 18, - "<not counted>", csv_sep, + counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, + csv_sep, csv_output ? 0 : -24, event_name(counter)); @@ -1024,7 +1032,7 @@ static int stat__set_big_num(const struct option *opt __used, static const struct option options[] = { OPT_CALLBACK('e', "event", &evsel_list, "event", "event selector. use 'perf list' to list available events", - parse_events), + parse_events_option), OPT_CALLBACK(0, "filter", &evsel_list, "filter", "event filter", parse_filter), OPT_BOOLEAN('i', "no-inherit", &no_inherit, diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 2da9162..55f4c76 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -12,6 +12,7 @@ #include "util/parse-events.h" #include "util/symbol.h" #include "util/thread_map.h" +#include "../../include/linux/hw_breakpoint.h" static long page_size; @@ -245,8 +246,8 @@ static int trace_event__id(const char *evname) int err = -1, fd; if (asprintf(&filename, - "/sys/kernel/debug/tracing/events/syscalls/%s/id", - evname) < 0) + "%s/syscalls/%s/id", + debugfs_path, evname) < 0) return -1; fd = open(filename, O_RDONLY); @@ -600,6 +601,246 @@ out_free_threads: #undef nsyscalls } +#define TEST_ASSERT_VAL(text, cond) \ +do { \ + if (!cond) { \ + pr_debug("FAILED %s:%d %s\n", __FILE__, __LINE__, text); \ + return -1; \ + } \ +} while (0) + +static int test__checkevent_tracepoint(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type); + TEST_ASSERT_VAL("wrong sample_type", + (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) == + evsel->attr.sample_type); + TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period); + return 0; +} + +static int test__checkevent_tracepoint_multi(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel; + + TEST_ASSERT_VAL("wrong number of entries", evlist->nr_entries > 1); + + list_for_each_entry(evsel, &evlist->entries, node) { + TEST_ASSERT_VAL("wrong type", + PERF_TYPE_TRACEPOINT == evsel->attr.type); + TEST_ASSERT_VAL("wrong sample_type", + (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) + == evsel->attr.sample_type); + TEST_ASSERT_VAL("wrong sample_period", + 1 == evsel->attr.sample_period); + } + return 0; +} + +static int test__checkevent_raw(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_RAW == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", 1 == evsel->attr.config); + return 0; +} + +static int test__checkevent_numeric(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", 1 == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", 1 == evsel->attr.config); + return 0; +} + +static int test__checkevent_symbolic_name(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", + PERF_COUNT_HW_INSTRUCTIONS == evsel->attr.config); + return 0; +} + +static int test__checkevent_symbolic_alias(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_SOFTWARE == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", + PERF_COUNT_SW_PAGE_FAULTS == evsel->attr.config); + return 0; +} + +static int test__checkevent_genhw(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_HW_CACHE == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", (1 << 16) == evsel->attr.config); + return 0; +} + +static int test__checkevent_breakpoint(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_BREAKPOINT == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config); + TEST_ASSERT_VAL("wrong bp_type", (HW_BREAKPOINT_R | HW_BREAKPOINT_W) == + evsel->attr.bp_type); + TEST_ASSERT_VAL("wrong bp_len", HW_BREAKPOINT_LEN_4 == + evsel->attr.bp_len); + return 0; +} + +static int test__checkevent_breakpoint_x(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", PERF_TYPE_BREAKPOINT == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config); + TEST_ASSERT_VAL("wrong bp_type", + HW_BREAKPOINT_X == evsel->attr.bp_type); + TEST_ASSERT_VAL("wrong bp_len", sizeof(long) == evsel->attr.bp_len); + return 0; +} + +static int test__checkevent_breakpoint_r(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", + PERF_TYPE_BREAKPOINT == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config); + TEST_ASSERT_VAL("wrong bp_type", + HW_BREAKPOINT_R == evsel->attr.bp_type); + TEST_ASSERT_VAL("wrong bp_len", + HW_BREAKPOINT_LEN_4 == evsel->attr.bp_len); + return 0; +} + +static int test__checkevent_breakpoint_w(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); + TEST_ASSERT_VAL("wrong type", + PERF_TYPE_BREAKPOINT == evsel->attr.type); + TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config); + TEST_ASSERT_VAL("wrong bp_type", + HW_BREAKPOINT_W == evsel->attr.bp_type); + TEST_ASSERT_VAL("wrong bp_len", + HW_BREAKPOINT_LEN_4 == evsel->attr.bp_len); + return 0; +} + +static struct test__event_st { + const char *name; + __u32 type; + int (*check)(struct perf_evlist *evlist); +} test__events[] = { + { + .name = "syscalls:sys_enter_open", + .check = test__checkevent_tracepoint, + }, + { + .name = "syscalls:*", + .check = test__checkevent_tracepoint_multi, + }, + { + .name = "r1", + .check = test__checkevent_raw, + }, + { + .name = "1:1", + .check = test__checkevent_numeric, + }, + { + .name = "instructions", + .check = test__checkevent_symbolic_name, + }, + { + .name = "faults", + .check = test__checkevent_symbolic_alias, + }, + { + .name = "L1-dcache-load-miss", + .check = test__checkevent_genhw, + }, + { + .name = "mem:0", + .check = test__checkevent_breakpoint, + }, + { + .name = "mem:0:x", + .check = test__checkevent_breakpoint_x, + }, + { + .name = "mem:0:r", + .check = test__checkevent_breakpoint_r, + }, + { + .name = "mem:0:w", + .check = test__checkevent_breakpoint_w, + }, +}; + +#define TEST__EVENTS_CNT (sizeof(test__events) / sizeof(struct test__event_st)) + +static int test__parse_events(void) +{ + struct perf_evlist *evlist; + u_int i; + int ret = 0; + + for (i = 0; i < TEST__EVENTS_CNT; i++) { + struct test__event_st *e = &test__events[i]; + + evlist = perf_evlist__new(NULL, NULL); + if (evlist == NULL) + break; + + ret = parse_events(evlist, e->name, 0); + if (ret) { + pr_debug("failed to parse event '%s', err %d\n", + e->name, ret); + break; + } + + ret = e->check(evlist); + if (ret) + break; + + perf_evlist__delete(evlist); + } + + return ret; +} static struct test { const char *desc; int (*func)(void); @@ -621,6 +862,10 @@ static struct test { .func = test__basic_mmap, }, { + .desc = "parse events tests", + .func = test__parse_events, + }, + { .func = NULL, }, }; diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index f2f3f49..a43433f 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -990,7 +990,7 @@ static const char * const top_usage[] = { static const struct option options[] = { OPT_CALLBACK('e', "event", &top.evlist, "event", "event selector. use 'perf list' to list available events", - parse_events), + parse_events_option), OPT_INTEGER('c', "count", &default_interval, "event period to sample"), OPT_INTEGER('p', "pid", &top.target_pid, diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h index 1a79df9..9b4ff16c 100644 --- a/tools/perf/util/callchain.h +++ b/tools/perf/util/callchain.h @@ -14,6 +14,11 @@ enum chain_mode { CHAIN_GRAPH_REL }; +enum chain_order { + ORDER_CALLER, + ORDER_CALLEE +}; + struct callchain_node { struct callchain_node *parent; struct list_head siblings; @@ -41,6 +46,7 @@ struct callchain_param { u32 print_limit; double min_percent; sort_chain_func_t sort; + enum chain_order order; }; struct callchain_list { diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c new file mode 100644 index 0000000..fddf40f --- /dev/null +++ b/tools/perf/util/dwarf-aux.c @@ -0,0 +1,663 @@ +/* + * dwarf-aux.c : libdw auxiliary interfaces + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <stdbool.h> +#include "util.h" +#include "debug.h" +#include "dwarf-aux.h" + +/** + * cu_find_realpath - Find the realpath of the target file + * @cu_die: A DIE(dwarf information entry) of CU(compilation Unit) + * @fname: The tail filename of the target file + * + * Find the real(long) path of @fname in @cu_die. + */ +const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname) +{ + Dwarf_Files *files; + size_t nfiles, i; + const char *src = NULL; + int ret; + + if (!fname) + return NULL; + + ret = dwarf_getsrcfiles(cu_die, &files, &nfiles); + if (ret != 0) + return NULL; + + for (i = 0; i < nfiles; i++) { + src = dwarf_filesrc(files, i, NULL, NULL); + if (strtailcmp(src, fname) == 0) + break; + } + if (i == nfiles) + return NULL; + return src; +} + +/** + * cu_get_comp_dir - Get the path of compilation directory + * @cu_die: a CU DIE + * + * Get the path of compilation directory of given @cu_die. + * Since this depends on DW_AT_comp_dir, older gcc will not + * embedded it. In that case, this returns NULL. + */ +const char *cu_get_comp_dir(Dwarf_Die *cu_die) +{ + Dwarf_Attribute attr; + if (dwarf_attr(cu_die, DW_AT_comp_dir, &attr) == NULL) + return NULL; + return dwarf_formstring(&attr); +} + +/** + * cu_find_lineinfo - Get a line number and file name for given address + * @cu_die: a CU DIE + * @addr: An address + * @fname: a pointer which returns the file name string + * @lineno: a pointer which returns the line number + * + * Find a line number and file name for @addr in @cu_die. + */ +int cu_find_lineinfo(Dwarf_Die *cu_die, unsigned long addr, + const char **fname, int *lineno) +{ + Dwarf_Line *line; + Dwarf_Addr laddr; + + line = dwarf_getsrc_die(cu_die, (Dwarf_Addr)addr); + if (line && dwarf_lineaddr(line, &laddr) == 0 && + addr == (unsigned long)laddr && dwarf_lineno(line, lineno) == 0) { + *fname = dwarf_linesrc(line, NULL, NULL); + if (!*fname) + /* line number is useless without filename */ + *lineno = 0; + } + + return *lineno ?: -ENOENT; +} + +/** + * die_compare_name - Compare diename and tname + * @dw_die: a DIE + * @tname: a string of target name + * + * Compare the name of @dw_die and @tname. Return false if @dw_die has no name. + */ +bool die_compare_name(Dwarf_Die *dw_die, const char *tname) +{ + const char *name; + name = dwarf_diename(dw_die); + return name ? (strcmp(tname, name) == 0) : false; +} + +/** + * die_get_call_lineno - Get callsite line number of inline-function instance + * @in_die: a DIE of an inlined function instance + * + * Get call-site line number of @in_die. This means from where the inline + * function is called. + */ +int die_get_call_lineno(Dwarf_Die *in_die) +{ + Dwarf_Attribute attr; + Dwarf_Word ret; + + if (!dwarf_attr(in_die, DW_AT_call_line, &attr)) + return -ENOENT; + + dwarf_formudata(&attr, &ret); + return (int)ret; +} + +/** + * die_get_type - Get type DIE + * @vr_die: a DIE of a variable + * @die_mem: where to store a type DIE + * + * Get a DIE of the type of given variable (@vr_die), and store + * it to die_mem. Return NULL if fails to get a type DIE. + */ +Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) +{ + Dwarf_Attribute attr; + + if (dwarf_attr_integrate(vr_die, DW_AT_type, &attr) && + dwarf_formref_die(&attr, die_mem)) + return die_mem; + else + return NULL; +} + +/* Get a type die, but skip qualifiers */ +static Dwarf_Die *__die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) +{ + int tag; + + do { + vr_die = die_get_type(vr_die, die_mem); + if (!vr_die) + break; + tag = dwarf_tag(vr_die); + } while (tag == DW_TAG_const_type || + tag == DW_TAG_restrict_type || + tag == DW_TAG_volatile_type || + tag == DW_TAG_shared_type); + + return vr_die; +} + +/** + * die_get_real_type - Get a type die, but skip qualifiers and typedef + * @vr_die: a DIE of a variable + * @die_mem: where to store a type DIE + * + * Get a DIE of the type of given variable (@vr_die), and store + * it to die_mem. Return NULL if fails to get a type DIE. + * If the type is qualifiers (e.g. const) or typedef, this skips it + * and tries to find real type (structure or basic types, e.g. int). + */ +Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) +{ + do { + vr_die = __die_get_real_type(vr_die, die_mem); + } while (vr_die && dwarf_tag(vr_die) == DW_TAG_typedef); + + return vr_die; +} + +/* Get attribute and translate it as a udata */ +static int die_get_attr_udata(Dwarf_Die *tp_die, unsigned int attr_name, + Dwarf_Word *result) +{ + Dwarf_Attribute attr; + + if (dwarf_attr(tp_die, attr_name, &attr) == NULL || + dwarf_formudata(&attr, result) != 0) + return -ENOENT; + + return 0; +} + +/** + * die_is_signed_type - Check whether a type DIE is signed or not + * @tp_die: a DIE of a type + * + * Get the encoding of @tp_die and return true if the encoding + * is signed. + */ +bool die_is_signed_type(Dwarf_Die *tp_die) +{ + Dwarf_Word ret; + + if (die_get_attr_udata(tp_die, DW_AT_encoding, &ret)) + return false; + + return (ret == DW_ATE_signed_char || ret == DW_ATE_signed || + ret == DW_ATE_signed_fixed); +} + +/** + * die_get_data_member_location - Get the data-member offset + * @mb_die: a DIE of a member of a data structure + * @offs: The offset of the member in the data structure + * + * Get the offset of @mb_die in the data structure including @mb_die, and + * stores result offset to @offs. If any error occurs this returns errno. + */ +int die_get_data_member_location(Dwarf_Die *mb_die, Dwarf_Word *offs) +{ + Dwarf_Attribute attr; + Dwarf_Op *expr; + size_t nexpr; + int ret; + + if (dwarf_attr(mb_die, DW_AT_data_member_location, &attr) == NULL) + return -ENOENT; + + if (dwarf_formudata(&attr, offs) != 0) { + /* DW_AT_data_member_location should be DW_OP_plus_uconst */ + ret = dwarf_getlocation(&attr, &expr, &nexpr); + if (ret < 0 || nexpr == 0) + return -ENOENT; + + if (expr[0].atom != DW_OP_plus_uconst || nexpr != 1) { + pr_debug("Unable to get offset:Unexpected OP %x (%zd)\n", + expr[0].atom, nexpr); + return -ENOTSUP; + } + *offs = (Dwarf_Word)expr[0].number; + } + return 0; +} + +/** + * die_find_child - Generic DIE search function in DIE tree + * @rt_die: a root DIE + * @callback: a callback function + * @data: a user data passed to the callback function + * @die_mem: a buffer for result DIE + * + * Trace DIE tree from @rt_die and call @callback for each child DIE. + * If @callback returns DIE_FIND_CB_END, this stores the DIE into + * @die_mem and returns it. If @callback returns DIE_FIND_CB_CONTINUE, + * this continues to trace the tree. Optionally, @callback can return + * DIE_FIND_CB_CHILD and DIE_FIND_CB_SIBLING, those means trace only + * the children and trace only the siblings respectively. + * Returns NULL if @callback can't find any appropriate DIE. + */ +Dwarf_Die *die_find_child(Dwarf_Die *rt_die, + int (*callback)(Dwarf_Die *, void *), + void *data, Dwarf_Die *die_mem) +{ + Dwarf_Die child_die; + int ret; + + ret = dwarf_child(rt_die, die_mem); + if (ret != 0) + return NULL; + + do { + ret = callback(die_mem, data); + if (ret == DIE_FIND_CB_END) + return die_mem; + + if ((ret & DIE_FIND_CB_CHILD) && + die_find_child(die_mem, callback, data, &child_die)) { + memcpy(die_mem, &child_die, sizeof(Dwarf_Die)); + return die_mem; + } + } while ((ret & DIE_FIND_CB_SIBLING) && + dwarf_siblingof(die_mem, die_mem) == 0); + + return NULL; +} + +struct __addr_die_search_param { + Dwarf_Addr addr; + Dwarf_Die *die_mem; +}; + +/* die_find callback for non-inlined function search */ +static int __die_search_func_cb(Dwarf_Die *fn_die, void *data) +{ + struct __addr_die_search_param *ad = data; + + if (dwarf_tag(fn_die) == DW_TAG_subprogram && + dwarf_haspc(fn_die, ad->addr)) { + memcpy(ad->die_mem, fn_die, sizeof(Dwarf_Die)); + return DWARF_CB_ABORT; + } + return DWARF_CB_OK; +} + +/** + * die_find_realfunc - Search a non-inlined function at given address + * @cu_die: a CU DIE which including @addr + * @addr: target address + * @die_mem: a buffer for result DIE + * + * Search a non-inlined function DIE which includes @addr. Stores the + * DIE to @die_mem and returns it if found. Returns NULl if failed. + */ +Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr, + Dwarf_Die *die_mem) +{ + struct __addr_die_search_param ad; + ad.addr = addr; + ad.die_mem = die_mem; + /* dwarf_getscopes can't find subprogram. */ + if (!dwarf_getfuncs(cu_die, __die_search_func_cb, &ad, 0)) + return NULL; + else + return die_mem; +} + +/* die_find callback for inline function search */ +static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data) +{ + Dwarf_Addr *addr = data; + + if (dwarf_tag(die_mem) == DW_TAG_inlined_subroutine && + dwarf_haspc(die_mem, *addr)) + return DIE_FIND_CB_END; + + return DIE_FIND_CB_CONTINUE; +} + +/** + * die_find_inlinefunc - Search an inlined function at given address + * @cu_die: a CU DIE which including @addr + * @addr: target address + * @die_mem: a buffer for result DIE + * + * Search an inlined function DIE which includes @addr. Stores the + * DIE to @die_mem and returns it if found. Returns NULl if failed. + * If several inlined functions are expanded recursively, this trace + * it and returns deepest one. + */ +Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, + Dwarf_Die *die_mem) +{ + Dwarf_Die tmp_die; + + sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, &tmp_die); + if (!sp_die) + return NULL; + + /* Inlined function could be recursive. Trace it until fail */ + while (sp_die) { + memcpy(die_mem, sp_die, sizeof(Dwarf_Die)); + sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, + &tmp_die); + } + + return die_mem; +} + +/* Line walker internal parameters */ +struct __line_walk_param { + const char *fname; + line_walk_callback_t callback; + void *data; + int retval; +}; + +static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data) +{ + struct __line_walk_param *lw = data; + Dwarf_Addr addr; + int lineno; + + if (dwarf_tag(in_die) == DW_TAG_inlined_subroutine) { + lineno = die_get_call_lineno(in_die); + if (lineno > 0 && dwarf_entrypc(in_die, &addr) == 0) { + lw->retval = lw->callback(lw->fname, lineno, addr, + lw->data); + if (lw->retval != 0) + return DIE_FIND_CB_END; + } + } + return DIE_FIND_CB_SIBLING; +} + +/* Walk on lines of blocks included in given DIE */ +static int __die_walk_funclines(Dwarf_Die *sp_die, + line_walk_callback_t callback, void *data) +{ + struct __line_walk_param lw = { + .callback = callback, + .data = data, + .retval = 0, + }; + Dwarf_Die die_mem; + Dwarf_Addr addr; + int lineno; + + /* Handle function declaration line */ + lw.fname = dwarf_decl_file(sp_die); + if (lw.fname && dwarf_decl_line(sp_die, &lineno) == 0 && + dwarf_entrypc(sp_die, &addr) == 0) { + lw.retval = callback(lw.fname, lineno, addr, data); + if (lw.retval != 0) + goto done; + } + die_find_child(sp_die, __die_walk_funclines_cb, &lw, &die_mem); +done: + return lw.retval; +} + +static int __die_walk_culines_cb(Dwarf_Die *sp_die, void *data) +{ + struct __line_walk_param *lw = data; + + lw->retval = __die_walk_funclines(sp_die, lw->callback, lw->data); + if (lw->retval != 0) + return DWARF_CB_ABORT; + + return DWARF_CB_OK; +} + +/** + * die_walk_lines - Walk on lines inside given DIE + * @rt_die: a root DIE (CU or subprogram) + * @callback: callback routine + * @data: user data + * + * Walk on all lines inside given @rt_die and call @callback on each line. + * If the @rt_die is a function, walk only on the lines inside the function, + * otherwise @rt_die must be a CU DIE. + * Note that this walks not only dwarf line list, but also function entries + * and inline call-site. + */ +int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data) +{ + Dwarf_Lines *lines; + Dwarf_Line *line; + Dwarf_Addr addr; + const char *fname; + int lineno, ret = 0; + Dwarf_Die die_mem, *cu_die; + size_t nlines, i; + + /* Get the CU die */ + if (dwarf_tag(rt_die) == DW_TAG_subprogram) + cu_die = dwarf_diecu(rt_die, &die_mem, NULL, NULL); + else + cu_die = rt_die; + if (!cu_die) { + pr_debug2("Failed to get CU from subprogram\n"); + return -EINVAL; + } + + /* Get lines list in the CU */ + if (dwarf_getsrclines(cu_die, &lines, &nlines) != 0) { + pr_debug2("Failed to get source lines on this CU.\n"); + return -ENOENT; + } + pr_debug2("Get %zd lines from this CU\n", nlines); + + /* Walk on the lines on lines list */ + for (i = 0; i < nlines; i++) { + line = dwarf_onesrcline(lines, i); + if (line == NULL || + dwarf_lineno(line, &lineno) != 0 || + dwarf_lineaddr(line, &addr) != 0) { + pr_debug2("Failed to get line info. " + "Possible error in debuginfo.\n"); + continue; + } + /* Filter lines based on address */ + if (rt_die != cu_die) + /* + * Address filtering + * The line is included in given function, and + * no inline block includes it. + */ + if (!dwarf_haspc(rt_die, addr) || + die_find_inlinefunc(rt_die, addr, &die_mem)) + continue; + /* Get source line */ + fname = dwarf_linesrc(line, NULL, NULL); + + ret = callback(fname, lineno, addr, data); + if (ret != 0) + return ret; + } + + /* + * Dwarf lines doesn't include function declarations and inlined + * subroutines. We have to check functions list or given function. + */ + if (rt_die != cu_die) + ret = __die_walk_funclines(rt_die, callback, data); + else { + struct __line_walk_param param = { + .callback = callback, + .data = data, + .retval = 0, + }; + dwarf_getfuncs(cu_die, __die_walk_culines_cb, ¶m, 0); + ret = param.retval; + } + + return ret; +} + +struct __find_variable_param { + const char *name; + Dwarf_Addr addr; +}; + +static int __die_find_variable_cb(Dwarf_Die *die_mem, void *data) +{ + struct __find_variable_param *fvp = data; + int tag; + + tag = dwarf_tag(die_mem); + if ((tag == DW_TAG_formal_parameter || + tag == DW_TAG_variable) && + die_compare_name(die_mem, fvp->name)) + return DIE_FIND_CB_END; + + if (dwarf_haspc(die_mem, fvp->addr)) + return DIE_FIND_CB_CONTINUE; + else + return DIE_FIND_CB_SIBLING; +} + +/** + * die_find_variable_at - Find a given name variable at given address + * @sp_die: a function DIE + * @name: variable name + * @addr: address + * @die_mem: a buffer for result DIE + * + * Find a variable DIE called @name at @addr in @sp_die. + */ +Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name, + Dwarf_Addr addr, Dwarf_Die *die_mem) +{ + struct __find_variable_param fvp = { .name = name, .addr = addr}; + + return die_find_child(sp_die, __die_find_variable_cb, (void *)&fvp, + die_mem); +} + +static int __die_find_member_cb(Dwarf_Die *die_mem, void *data) +{ + const char *name = data; + + if ((dwarf_tag(die_mem) == DW_TAG_member) && + die_compare_name(die_mem, name)) + return DIE_FIND_CB_END; + + return DIE_FIND_CB_SIBLING; +} + +/** + * die_find_member - Find a given name member in a data structure + * @st_die: a data structure type DIE + * @name: member name + * @die_mem: a buffer for result DIE + * + * Find a member DIE called @name in @st_die. + */ +Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name, + Dwarf_Die *die_mem) +{ + return die_find_child(st_die, __die_find_member_cb, (void *)name, + die_mem); +} + +/** + * die_get_typename - Get the name of given variable DIE + * @vr_die: a variable DIE + * @buf: a buffer for result type name + * @len: a max-length of @buf + * + * Get the name of @vr_die and stores it to @buf. Return the actual length + * of type name if succeeded. Return -E2BIG if @len is not enough long, and + * Return -ENOENT if failed to find type name. + * Note that the result will stores typedef name if possible, and stores + * "*(function_type)" if the type is a function pointer. + */ +int die_get_typename(Dwarf_Die *vr_die, char *buf, int len) +{ + Dwarf_Die type; + int tag, ret, ret2; + const char *tmp = ""; + + if (__die_get_real_type(vr_die, &type) == NULL) + return -ENOENT; + + tag = dwarf_tag(&type); + if (tag == DW_TAG_array_type || tag == DW_TAG_pointer_type) + tmp = "*"; + else if (tag == DW_TAG_subroutine_type) { + /* Function pointer */ + ret = snprintf(buf, len, "(function_type)"); + return (ret >= len) ? -E2BIG : ret; + } else { + if (!dwarf_diename(&type)) + return -ENOENT; + if (tag == DW_TAG_union_type) + tmp = "union "; + else if (tag == DW_TAG_structure_type) + tmp = "struct "; + /* Write a base name */ + ret = snprintf(buf, len, "%s%s", tmp, dwarf_diename(&type)); + return (ret >= len) ? -E2BIG : ret; + } + ret = die_get_typename(&type, buf, len); + if (ret > 0) { + ret2 = snprintf(buf + ret, len - ret, "%s", tmp); + ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret; + } + return ret; +} + +/** + * die_get_varname - Get the name and type of given variable DIE + * @vr_die: a variable DIE + * @buf: a buffer for type and variable name + * @len: the max-length of @buf + * + * Get the name and type of @vr_die and stores it in @buf as "type\tname". + */ +int die_get_varname(Dwarf_Die *vr_die, char *buf, int len) +{ + int ret, ret2; + + ret = die_get_typename(vr_die, buf, len); + if (ret < 0) { + pr_debug("Failed to get type, make it unknown.\n"); + ret = snprintf(buf, len, "(unknown_type)"); + } + if (ret > 0) { + ret2 = snprintf(buf + ret, len - ret, "\t%s", + dwarf_diename(vr_die)); + ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret; + } + return ret; +} + diff --git a/tools/perf/util/dwarf-aux.h b/tools/perf/util/dwarf-aux.h new file mode 100644 index 0000000..bc3b211 --- /dev/null +++ b/tools/perf/util/dwarf-aux.h @@ -0,0 +1,100 @@ +#ifndef _DWARF_AUX_H +#define _DWARF_AUX_H +/* + * dwarf-aux.h : libdw auxiliary interfaces + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <dwarf.h> +#include <elfutils/libdw.h> +#include <elfutils/libdwfl.h> +#include <elfutils/version.h> + +/* Find the realpath of the target file */ +extern const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname); + +/* Get DW_AT_comp_dir (should be NULL with older gcc) */ +extern const char *cu_get_comp_dir(Dwarf_Die *cu_die); + +/* Get a line number and file name for given address */ +extern int cu_find_lineinfo(Dwarf_Die *cudie, unsigned long addr, + const char **fname, int *lineno); + +/* Compare diename and tname */ +extern bool die_compare_name(Dwarf_Die *dw_die, const char *tname); + +/* Get callsite line number of inline-function instance */ +extern int die_get_call_lineno(Dwarf_Die *in_die); + +/* Get type die */ +extern Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem); + +/* Get a type die, but skip qualifiers and typedef */ +extern Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem); + +/* Check whether the DIE is signed or not */ +extern bool die_is_signed_type(Dwarf_Die *tp_die); + +/* Get data_member_location offset */ +extern int die_get_data_member_location(Dwarf_Die *mb_die, Dwarf_Word *offs); + +/* Return values for die_find_child() callbacks */ +enum { + DIE_FIND_CB_END = 0, /* End of Search */ + DIE_FIND_CB_CHILD = 1, /* Search only children */ + DIE_FIND_CB_SIBLING = 2, /* Search only siblings */ + DIE_FIND_CB_CONTINUE = 3, /* Search children and siblings */ +}; + +/* Search child DIEs */ +extern Dwarf_Die *die_find_child(Dwarf_Die *rt_die, + int (*callback)(Dwarf_Die *, void *), + void *data, Dwarf_Die *die_mem); + +/* Search a non-inlined function including given address */ +extern Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr, + Dwarf_Die *die_mem); + +/* Search an inlined function including given address */ +extern Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, + Dwarf_Die *die_mem); + +/* Walker on lines (Note: line number will not be sorted) */ +typedef int (* line_walk_callback_t) (const char *fname, int lineno, + Dwarf_Addr addr, void *data); + +/* + * Walk on lines inside given DIE. If the DIE is a subprogram, walk only on + * the lines inside the subprogram, otherwise the DIE must be a CU DIE. + */ +extern int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, + void *data); + +/* Find a variable called 'name' at given address */ +extern Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name, + Dwarf_Addr addr, Dwarf_Die *die_mem); + +/* Find a member called 'name' */ +extern Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name, + Dwarf_Die *die_mem); + +/* Get the name of given variable DIE */ +extern int die_get_typename(Dwarf_Die *vr_die, char *buf, int len); + +/* Get the name and type of given variable DIE, stored as "type\tname" */ +extern int die_get_varname(Dwarf_Die *vr_die, char *buf, int len); +#endif diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 0239eb8..a03a36b 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -377,6 +377,7 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, array++; } + data->addr = 0; if (type & PERF_SAMPLE_ADDR) { data->addr = *array; array++; diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 7e9366e..e9a3155 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -61,6 +61,7 @@ struct perf_evsel { off_t id_offset; }; struct cgroup_sel *cgrp; + bool supported; }; struct cpu_map; diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index afb0849..cb2959a 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -877,9 +877,12 @@ int perf_session__read_header(struct perf_session *session, int fd) struct perf_evsel *evsel; off_t tmp; - if (perf_header__getbuffer64(header, fd, &f_attr, sizeof(f_attr))) + if (readn(fd, &f_attr, sizeof(f_attr)) <= 0) goto out_errno; + if (header->needs_swap) + perf_event__attr_swap(&f_attr.attr); + tmp = lseek(fd, 0, SEEK_CUR); evsel = perf_evsel__new(&f_attr.attr, i); diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index 627a02e..677e1da 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -14,7 +14,8 @@ enum hist_filter { struct callchain_param callchain_param = { .mode = CHAIN_GRAPH_REL, - .min_percent = 0.5 + .min_percent = 0.5, + .order = ORDER_CALLEE }; u16 hists__col_len(struct hists *self, enum hist_column col) @@ -846,6 +847,9 @@ print_entries: for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) { struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node); + if (h->filtered) + continue; + if (show_displacement) { if (h->pair != NULL) displacement = ((long)h->pair->position - diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 41982c3..4ea7e19 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -86,22 +86,24 @@ static const char *sw_event_names[PERF_COUNT_SW_MAX] = { #define MAX_ALIASES 8 -static const char *hw_cache[][MAX_ALIASES] = { +static const char *hw_cache[PERF_COUNT_HW_CACHE_MAX][MAX_ALIASES] = { { "L1-dcache", "l1-d", "l1d", "L1-data", }, { "L1-icache", "l1-i", "l1i", "L1-instruction", }, - { "LLC", "L2" }, + { "LLC", "L2", }, { "dTLB", "d-tlb", "Data-TLB", }, { "iTLB", "i-tlb", "Instruction-TLB", }, { "branch", "branches", "bpu", "btb", "bpc", }, + { "node", }, }; -static const char *hw_cache_op[][MAX_ALIASES] = { +static const char *hw_cache_op[PERF_COUNT_HW_CACHE_OP_MAX][MAX_ALIASES] = { { "load", "loads", "read", }, { "store", "stores", "write", }, { "prefetch", "prefetches", "speculative-read", "speculative-load", }, }; -static const char *hw_cache_result[][MAX_ALIASES] = { +static const char *hw_cache_result[PERF_COUNT_HW_CACHE_RESULT_MAX] + [MAX_ALIASES] = { { "refs", "Reference", "ops", "access", }, { "misses", "miss", }, }; @@ -124,6 +126,7 @@ static unsigned long hw_cache_stat[C(MAX)] = { [C(DTLB)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH), [C(ITLB)] = (CACHE_READ), [C(BPU)] = (CACHE_READ), + [C(NODE)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH), }; #define for_each_subsystem(sys_dir, sys_dirent, sys_next) \ @@ -393,7 +396,7 @@ parse_generic_hw_event(const char **str, struct perf_event_attr *attr) PERF_COUNT_HW_CACHE_OP_MAX); if (cache_op >= 0) { if (!is_cache_op_valid(cache_type, cache_op)) - return 0; + return EVT_FAILED; continue; } } @@ -475,7 +478,7 @@ parse_single_tracepoint_event(char *sys_name, /* sys + ':' + event + ':' + flags*/ #define MAX_EVOPT_LEN (MAX_EVENT_LENGTH * 2 + 2 + 128) static enum event_result -parse_multiple_tracepoint_event(const struct option *opt, char *sys_name, +parse_multiple_tracepoint_event(struct perf_evlist *evlist, char *sys_name, const char *evt_exp, char *flags) { char evt_path[MAXPATHLEN]; @@ -509,7 +512,7 @@ parse_multiple_tracepoint_event(const struct option *opt, char *sys_name, if (len < 0) return EVT_FAILED; - if (parse_events(opt, event_opt, 0)) + if (parse_events(evlist, event_opt, 0)) return EVT_FAILED; } @@ -517,7 +520,7 @@ parse_multiple_tracepoint_event(const struct option *opt, char *sys_name, } static enum event_result -parse_tracepoint_event(const struct option *opt, const char **strp, +parse_tracepoint_event(struct perf_evlist *evlist, const char **strp, struct perf_event_attr *attr) { const char *evt_name; @@ -557,8 +560,8 @@ parse_tracepoint_event(const struct option *opt, const char **strp, return EVT_FAILED; if (strpbrk(evt_name, "*?")) { *strp += strlen(sys_name) + evt_length + 1; /* 1 == the ':' */ - return parse_multiple_tracepoint_event(opt, sys_name, evt_name, - flags); + return parse_multiple_tracepoint_event(evlist, sys_name, + evt_name, flags); } else { return parse_single_tracepoint_event(sys_name, evt_name, evt_length, attr, strp); @@ -778,12 +781,12 @@ parse_event_modifier(const char **strp, struct perf_event_attr *attr) * Symbolic names are (almost) exactly matched. */ static enum event_result -parse_event_symbols(const struct option *opt, const char **str, +parse_event_symbols(struct perf_evlist *evlist, const char **str, struct perf_event_attr *attr) { enum event_result ret; - ret = parse_tracepoint_event(opt, str, attr); + ret = parse_tracepoint_event(evlist, str, attr); if (ret != EVT_FAILED) goto modifier; @@ -822,9 +825,8 @@ modifier: return ret; } -int parse_events(const struct option *opt, const char *str, int unset __used) +int parse_events(struct perf_evlist *evlist , const char *str, int unset __used) { - struct perf_evlist *evlist = *(struct perf_evlist **)opt->value; struct perf_event_attr attr; enum event_result ret; const char *ostr; @@ -832,7 +834,7 @@ int parse_events(const struct option *opt, const char *str, int unset __used) for (;;) { ostr = str; memset(&attr, 0, sizeof(attr)); - ret = parse_event_symbols(opt, &str, &attr); + ret = parse_event_symbols(evlist, &str, &attr); if (ret == EVT_FAILED) return -1; @@ -863,6 +865,13 @@ int parse_events(const struct option *opt, const char *str, int unset __used) return 0; } +int parse_events_option(const struct option *opt, const char *str, + int unset __used) +{ + struct perf_evlist *evlist = *(struct perf_evlist **)opt->value; + return parse_events(evlist, str, unset); +} + int parse_filter(const struct option *opt, const char *str, int unset __used) { diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h index 746d3fc..2f8e375 100644 --- a/tools/perf/util/parse-events.h +++ b/tools/perf/util/parse-events.h @@ -8,6 +8,7 @@ struct list_head; struct perf_evsel; +struct perf_evlist; struct option; @@ -24,7 +25,10 @@ const char *event_type(int type); const char *event_name(struct perf_evsel *event); extern const char *__event_name(int type, u64 config); -extern int parse_events(const struct option *opt, const char *str, int unset); +extern int parse_events_option(const struct option *opt, const char *str, + int unset); +extern int parse_events(struct perf_evlist *evlist, const char *str, + int unset); extern int parse_filter(const struct option *opt, const char *str, int unset); #define EVENTS_HELP_MAX (128*1024) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index f022316..b82d54f 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -117,6 +117,10 @@ static struct map *kernel_get_module_map(const char *module) struct rb_node *nd; struct map_groups *grp = &machine.kmaps; + /* A file path -- this is an offline module */ + if (module && strchr(module, '/')) + return machine__new_module(&machine, 0, module); + if (!module) module = "kernel"; @@ -170,16 +174,24 @@ const char *kernel_get_module_path(const char *module) } #ifdef DWARF_SUPPORT -static int open_vmlinux(const char *module) +/* Open new debuginfo of given module */ +static struct debuginfo *open_debuginfo(const char *module) { - const char *path = kernel_get_module_path(module); - if (!path) { - pr_err("Failed to find path of %s module.\n", - module ?: "kernel"); - return -ENOENT; + const char *path; + + /* A file path -- this is an offline module */ + if (module && strchr(module, '/')) + path = module; + else { + path = kernel_get_module_path(module); + + if (!path) { + pr_err("Failed to find path of %s module.\n", + module ?: "kernel"); + return NULL; + } } - pr_debug("Try to open %s\n", path); - return open(path, O_RDONLY); + return debuginfo__new(path); } /* @@ -193,13 +205,24 @@ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp, struct map *map; u64 addr; int ret = -ENOENT; + struct debuginfo *dinfo; sym = __find_kernel_function_by_name(tp->symbol, &map); if (sym) { addr = map->unmap_ip(map, sym->start + tp->offset); pr_debug("try to find %s+%ld@%" PRIx64 "\n", tp->symbol, tp->offset, addr); - ret = find_perf_probe_point((unsigned long)addr, pp); + + dinfo = debuginfo__new_online_kernel(addr); + if (dinfo) { + ret = debuginfo__find_probe_point(dinfo, + (unsigned long)addr, pp); + debuginfo__delete(dinfo); + } else { + pr_debug("Failed to open debuginfo at 0x%" PRIx64 "\n", + addr); + ret = -ENOENT; + } } if (ret <= 0) { pr_debug("Failed to find corresponding probes from " @@ -214,30 +237,70 @@ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp, return 0; } +static int add_module_to_probe_trace_events(struct probe_trace_event *tevs, + int ntevs, const char *module) +{ + int i, ret = 0; + char *tmp; + + if (!module) + return 0; + + tmp = strrchr(module, '/'); + if (tmp) { + /* This is a module path -- get the module name */ + module = strdup(tmp + 1); + if (!module) + return -ENOMEM; + tmp = strchr(module, '.'); + if (tmp) + *tmp = '\0'; + tmp = (char *)module; /* For free() */ + } + + for (i = 0; i < ntevs; i++) { + tevs[i].point.module = strdup(module); + if (!tevs[i].point.module) { + ret = -ENOMEM; + break; + } + } + + if (tmp) + free(tmp); + + return ret; +} + /* Try to find perf_probe_event with debuginfo */ static int try_to_find_probe_trace_events(struct perf_probe_event *pev, - struct probe_trace_event **tevs, - int max_tevs, const char *module) + struct probe_trace_event **tevs, + int max_tevs, const char *module) { bool need_dwarf = perf_probe_event_need_dwarf(pev); - int fd, ntevs; + struct debuginfo *dinfo = open_debuginfo(module); + int ntevs, ret = 0; - fd = open_vmlinux(module); - if (fd < 0) { + if (!dinfo) { if (need_dwarf) { pr_warning("Failed to open debuginfo file.\n"); - return fd; + return -ENOENT; } - pr_debug("Could not open vmlinux. Try to use symbols.\n"); + pr_debug("Could not open debuginfo. Try to use symbols.\n"); return 0; } - /* Searching trace events corresponding to probe event */ - ntevs = find_probe_trace_events(fd, pev, tevs, max_tevs); + /* Searching trace events corresponding to a probe event */ + ntevs = debuginfo__find_trace_events(dinfo, pev, tevs, max_tevs); + + debuginfo__delete(dinfo); if (ntevs > 0) { /* Succeeded to find trace events */ pr_debug("find %d probe_trace_events.\n", ntevs); - return ntevs; + if (module) + ret = add_module_to_probe_trace_events(*tevs, ntevs, + module); + return ret < 0 ? ret : ntevs; } if (ntevs == 0) { /* No error but failed to find probe point. */ @@ -371,8 +434,9 @@ int show_line_range(struct line_range *lr, const char *module) { int l = 1; struct line_node *ln; + struct debuginfo *dinfo; FILE *fp; - int fd, ret; + int ret; char *tmp; /* Search a line range */ @@ -380,13 +444,14 @@ int show_line_range(struct line_range *lr, const char *module) if (ret < 0) return ret; - fd = open_vmlinux(module); - if (fd < 0) { + dinfo = open_debuginfo(module); + if (!dinfo) { pr_warning("Failed to open debuginfo file.\n"); - return fd; + return -ENOENT; } - ret = find_line_range(fd, lr); + ret = debuginfo__find_line_range(dinfo, lr); + debuginfo__delete(dinfo); if (ret == 0) { pr_warning("Specified source line is not found.\n"); return -ENOENT; @@ -448,7 +513,8 @@ end: return ret; } -static int show_available_vars_at(int fd, struct perf_probe_event *pev, +static int show_available_vars_at(struct debuginfo *dinfo, + struct perf_probe_event *pev, int max_vls, struct strfilter *_filter, bool externs) { @@ -463,7 +529,8 @@ static int show_available_vars_at(int fd, struct perf_probe_event *pev, return -EINVAL; pr_debug("Searching variables at %s\n", buf); - ret = find_available_vars_at(fd, pev, &vls, max_vls, externs); + ret = debuginfo__find_available_vars_at(dinfo, pev, &vls, + max_vls, externs); if (ret <= 0) { pr_err("Failed to find variables at %s (%d)\n", buf, ret); goto end; @@ -504,24 +571,26 @@ int show_available_vars(struct perf_probe_event *pevs, int npevs, int max_vls, const char *module, struct strfilter *_filter, bool externs) { - int i, fd, ret = 0; + int i, ret = 0; + struct debuginfo *dinfo; ret = init_vmlinux(); if (ret < 0) return ret; + dinfo = open_debuginfo(module); + if (!dinfo) { + pr_warning("Failed to open debuginfo file.\n"); + return -ENOENT; + } + setup_pager(); - for (i = 0; i < npevs && ret >= 0; i++) { - fd = open_vmlinux(module); - if (fd < 0) { - pr_warning("Failed to open debug information file.\n"); - ret = fd; - break; - } - ret = show_available_vars_at(fd, &pevs[i], max_vls, _filter, + for (i = 0; i < npevs && ret >= 0; i++) + ret = show_available_vars_at(dinfo, &pevs[i], max_vls, _filter, externs); - } + + debuginfo__delete(dinfo); return ret; } @@ -990,7 +1059,7 @@ bool perf_probe_event_need_dwarf(struct perf_probe_event *pev) /* Parse probe_events event into struct probe_point */ static int parse_probe_trace_command(const char *cmd, - struct probe_trace_event *tev) + struct probe_trace_event *tev) { struct probe_trace_point *tp = &tev->point; char pr; @@ -1023,8 +1092,14 @@ static int parse_probe_trace_command(const char *cmd, tp->retprobe = (pr == 'r'); - /* Scan function name and offset */ - ret = sscanf(argv[1], "%a[^+]+%lu", (float *)(void *)&tp->symbol, + /* Scan module name(if there), function name and offset */ + p = strchr(argv[1], ':'); + if (p) { + tp->module = strndup(argv[1], p - argv[1]); + p++; + } else + p = argv[1]; + ret = sscanf(p, "%a[^+]+%lu", (float *)(void *)&tp->symbol, &tp->offset); if (ret == 1) tp->offset = 0; @@ -1269,9 +1344,10 @@ char *synthesize_probe_trace_command(struct probe_trace_event *tev) if (buf == NULL) return NULL; - len = e_snprintf(buf, MAX_CMDLEN, "%c:%s/%s %s+%lu", + len = e_snprintf(buf, MAX_CMDLEN, "%c:%s/%s %s%s%s+%lu", tp->retprobe ? 'r' : 'p', tev->group, tev->event, + tp->module ?: "", tp->module ? ":" : "", tp->symbol, tp->offset); if (len <= 0) goto error; @@ -1378,6 +1454,8 @@ static void clear_probe_trace_event(struct probe_trace_event *tev) free(tev->group); if (tev->point.symbol) free(tev->point.symbol); + if (tev->point.module) + free(tev->point.module); for (i = 0; i < tev->nargs; i++) { if (tev->args[i].name) free(tev->args[i].name); @@ -1729,7 +1807,7 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev, /* Convert perf_probe_event with debuginfo */ ret = try_to_find_probe_trace_events(pev, tevs, max_tevs, module); if (ret != 0) - return ret; + return ret; /* Found in debuginfo or got an error */ /* Allocate trace event buffer */ tev = *tevs = zalloc(sizeof(struct probe_trace_event)); @@ -1742,6 +1820,11 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev, ret = -ENOMEM; goto error; } + tev->point.module = strdup(module); + if (tev->point.module == NULL) { + ret = -ENOMEM; + goto error; + } tev->point.offset = pev->point.offset; tev->point.retprobe = pev->point.retprobe; tev->nargs = pev->nargs; diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h index 3434fc9..a7dee83 100644 --- a/tools/perf/util/probe-event.h +++ b/tools/perf/util/probe-event.h @@ -10,6 +10,7 @@ extern bool probe_event_dry_run; /* kprobe-tracer tracing point */ struct probe_trace_point { char *symbol; /* Base symbol */ + char *module; /* Module name */ unsigned long offset; /* Offset from symbol */ bool retprobe; /* Return probe flag */ }; diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 3b9d0b8..3e44a3e 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -43,21 +43,6 @@ /* Kprobe tracer basic type is up to u64 */ #define MAX_BASIC_TYPE_BITS 64 -/* - * Compare the tail of two strings. - * Return 0 if whole of either string is same as another's tail part. - */ -static int strtailcmp(const char *s1, const char *s2) -{ - int i1 = strlen(s1); - int i2 = strlen(s2); - while (--i1 >= 0 && --i2 >= 0) { - if (s1[i1] != s2[i2]) - return s1[i1] - s2[i2]; - } - return 0; -} - /* Line number list operations */ /* Add a line to line number list */ @@ -131,29 +116,37 @@ static const Dwfl_Callbacks offline_callbacks = { }; /* Get a Dwarf from offline image */ -static Dwarf *dwfl_init_offline_dwarf(int fd, Dwfl **dwflp, Dwarf_Addr *bias) +static int debuginfo__init_offline_dwarf(struct debuginfo *self, + const char *path) { Dwfl_Module *mod; - Dwarf *dbg = NULL; + int fd; - if (!dwflp) - return NULL; + fd = open(path, O_RDONLY); + if (fd < 0) + return fd; - *dwflp = dwfl_begin(&offline_callbacks); - if (!*dwflp) - return NULL; + self->dwfl = dwfl_begin(&offline_callbacks); + if (!self->dwfl) + goto error; - mod = dwfl_report_offline(*dwflp, "", "", fd); + mod = dwfl_report_offline(self->dwfl, "", "", fd); if (!mod) goto error; - dbg = dwfl_module_getdwarf(mod, bias); - if (!dbg) { + self->dbg = dwfl_module_getdwarf(mod, &self->bias); + if (!self->dbg) + goto error; + + return 0; error: - dwfl_end(*dwflp); - *dwflp = NULL; - } - return dbg; + if (self->dwfl) + dwfl_end(self->dwfl); + else + close(fd); + memset(self, 0, sizeof(*self)); + + return -ENOENT; } #if _ELFUTILS_PREREQ(0, 148) @@ -189,597 +182,81 @@ static const Dwfl_Callbacks kernel_callbacks = { }; /* Get a Dwarf from live kernel image */ -static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr, Dwfl **dwflp, - Dwarf_Addr *bias) +static int debuginfo__init_online_kernel_dwarf(struct debuginfo *self, + Dwarf_Addr addr) { - Dwarf *dbg; - - if (!dwflp) - return NULL; - - *dwflp = dwfl_begin(&kernel_callbacks); - if (!*dwflp) - return NULL; + self->dwfl = dwfl_begin(&kernel_callbacks); + if (!self->dwfl) + return -EINVAL; /* Load the kernel dwarves: Don't care the result here */ - dwfl_linux_kernel_report_kernel(*dwflp); - dwfl_linux_kernel_report_modules(*dwflp); + dwfl_linux_kernel_report_kernel(self->dwfl); + dwfl_linux_kernel_report_modules(self->dwfl); - dbg = dwfl_addrdwarf(*dwflp, addr, bias); + self->dbg = dwfl_addrdwarf(self->dwfl, addr, &self->bias); /* Here, check whether we could get a real dwarf */ - if (!dbg) { + if (!self->dbg) { pr_debug("Failed to find kernel dwarf at %lx\n", (unsigned long)addr); - dwfl_end(*dwflp); - *dwflp = NULL; + dwfl_end(self->dwfl); + memset(self, 0, sizeof(*self)); + return -ENOENT; } - return dbg; + + return 0; } #else /* With older elfutils, this just support kernel module... */ -static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr __used, Dwfl **dwflp, - Dwarf_Addr *bias) +static int debuginfo__init_online_kernel_dwarf(struct debuginfo *self, + Dwarf_Addr addr __used) { - int fd; const char *path = kernel_get_module_path("kernel"); if (!path) { pr_err("Failed to find vmlinux path\n"); - return NULL; + return -ENOENT; } pr_debug2("Use file %s for debuginfo\n", path); - fd = open(path, O_RDONLY); - if (fd < 0) - return NULL; - - return dwfl_init_offline_dwarf(fd, dwflp, bias); + return debuginfo__init_offline_dwarf(self, path); } #endif -/* Dwarf wrappers */ - -/* Find the realpath of the target file. */ -static const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname) -{ - Dwarf_Files *files; - size_t nfiles, i; - const char *src = NULL; - int ret; - - if (!fname) - return NULL; - - ret = dwarf_getsrcfiles(cu_die, &files, &nfiles); - if (ret != 0) - return NULL; - - for (i = 0; i < nfiles; i++) { - src = dwarf_filesrc(files, i, NULL, NULL); - if (strtailcmp(src, fname) == 0) - break; - } - if (i == nfiles) - return NULL; - return src; -} - -/* Get DW_AT_comp_dir (should be NULL with older gcc) */ -static const char *cu_get_comp_dir(Dwarf_Die *cu_die) -{ - Dwarf_Attribute attr; - if (dwarf_attr(cu_die, DW_AT_comp_dir, &attr) == NULL) - return NULL; - return dwarf_formstring(&attr); -} - -/* Get a line number and file name for given address */ -static int cu_find_lineinfo(Dwarf_Die *cudie, unsigned long addr, - const char **fname, int *lineno) -{ - Dwarf_Line *line; - Dwarf_Addr laddr; - - line = dwarf_getsrc_die(cudie, (Dwarf_Addr)addr); - if (line && dwarf_lineaddr(line, &laddr) == 0 && - addr == (unsigned long)laddr && dwarf_lineno(line, lineno) == 0) { - *fname = dwarf_linesrc(line, NULL, NULL); - if (!*fname) - /* line number is useless without filename */ - *lineno = 0; - } - - return *lineno ?: -ENOENT; -} - -/* Compare diename and tname */ -static bool die_compare_name(Dwarf_Die *dw_die, const char *tname) -{ - const char *name; - name = dwarf_diename(dw_die); - return name ? (strcmp(tname, name) == 0) : false; -} - -/* Get callsite line number of inline-function instance */ -static int die_get_call_lineno(Dwarf_Die *in_die) -{ - Dwarf_Attribute attr; - Dwarf_Word ret; - - if (!dwarf_attr(in_die, DW_AT_call_line, &attr)) - return -ENOENT; - - dwarf_formudata(&attr, &ret); - return (int)ret; -} - -/* Get type die */ -static Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) -{ - Dwarf_Attribute attr; - - if (dwarf_attr_integrate(vr_die, DW_AT_type, &attr) && - dwarf_formref_die(&attr, die_mem)) - return die_mem; - else - return NULL; -} - -/* Get a type die, but skip qualifiers */ -static Dwarf_Die *__die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) -{ - int tag; - - do { - vr_die = die_get_type(vr_die, die_mem); - if (!vr_die) - break; - tag = dwarf_tag(vr_die); - } while (tag == DW_TAG_const_type || - tag == DW_TAG_restrict_type || - tag == DW_TAG_volatile_type || - tag == DW_TAG_shared_type); - - return vr_die; -} - -/* Get a type die, but skip qualifiers and typedef */ -static Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem) -{ - do { - vr_die = __die_get_real_type(vr_die, die_mem); - } while (vr_die && dwarf_tag(vr_die) == DW_TAG_typedef); - - return vr_die; -} - -static int die_get_attr_udata(Dwarf_Die *tp_die, unsigned int attr_name, - Dwarf_Word *result) -{ - Dwarf_Attribute attr; - - if (dwarf_attr(tp_die, attr_name, &attr) == NULL || - dwarf_formudata(&attr, result) != 0) - return -ENOENT; - - return 0; -} - -static bool die_is_signed_type(Dwarf_Die *tp_die) -{ - Dwarf_Word ret; - - if (die_get_attr_udata(tp_die, DW_AT_encoding, &ret)) - return false; - - return (ret == DW_ATE_signed_char || ret == DW_ATE_signed || - ret == DW_ATE_signed_fixed); -} - -static int die_get_byte_size(Dwarf_Die *tp_die) -{ - Dwarf_Word ret; - - if (die_get_attr_udata(tp_die, DW_AT_byte_size, &ret)) - return 0; - - return (int)ret; -} - -static int die_get_bit_size(Dwarf_Die *tp_die) -{ - Dwarf_Word ret; - - if (die_get_attr_udata(tp_die, DW_AT_bit_size, &ret)) - return 0; - - return (int)ret; -} - -static int die_get_bit_offset(Dwarf_Die *tp_die) -{ - Dwarf_Word ret; - - if (die_get_attr_udata(tp_die, DW_AT_bit_offset, &ret)) - return 0; - - return (int)ret; -} - -/* Get data_member_location offset */ -static int die_get_data_member_location(Dwarf_Die *mb_die, Dwarf_Word *offs) -{ - Dwarf_Attribute attr; - Dwarf_Op *expr; - size_t nexpr; - int ret; - - if (dwarf_attr(mb_die, DW_AT_data_member_location, &attr) == NULL) - return -ENOENT; - - if (dwarf_formudata(&attr, offs) != 0) { - /* DW_AT_data_member_location should be DW_OP_plus_uconst */ - ret = dwarf_getlocation(&attr, &expr, &nexpr); - if (ret < 0 || nexpr == 0) - return -ENOENT; - - if (expr[0].atom != DW_OP_plus_uconst || nexpr != 1) { - pr_debug("Unable to get offset:Unexpected OP %x (%zd)\n", - expr[0].atom, nexpr); - return -ENOTSUP; - } - *offs = (Dwarf_Word)expr[0].number; - } - return 0; -} - -/* Return values for die_find callbacks */ -enum { - DIE_FIND_CB_FOUND = 0, /* End of Search */ - DIE_FIND_CB_CHILD = 1, /* Search only children */ - DIE_FIND_CB_SIBLING = 2, /* Search only siblings */ - DIE_FIND_CB_CONTINUE = 3, /* Search children and siblings */ -}; - -/* Search a child die */ -static Dwarf_Die *die_find_child(Dwarf_Die *rt_die, - int (*callback)(Dwarf_Die *, void *), - void *data, Dwarf_Die *die_mem) +struct debuginfo *debuginfo__new(const char *path) { - Dwarf_Die child_die; - int ret; - - ret = dwarf_child(rt_die, die_mem); - if (ret != 0) + struct debuginfo *self = zalloc(sizeof(struct debuginfo)); + if (!self) return NULL; - do { - ret = callback(die_mem, data); - if (ret == DIE_FIND_CB_FOUND) - return die_mem; - - if ((ret & DIE_FIND_CB_CHILD) && - die_find_child(die_mem, callback, data, &child_die)) { - memcpy(die_mem, &child_die, sizeof(Dwarf_Die)); - return die_mem; - } - } while ((ret & DIE_FIND_CB_SIBLING) && - dwarf_siblingof(die_mem, die_mem) == 0); - - return NULL; -} - -struct __addr_die_search_param { - Dwarf_Addr addr; - Dwarf_Die *die_mem; -}; - -static int __die_search_func_cb(Dwarf_Die *fn_die, void *data) -{ - struct __addr_die_search_param *ad = data; - - if (dwarf_tag(fn_die) == DW_TAG_subprogram && - dwarf_haspc(fn_die, ad->addr)) { - memcpy(ad->die_mem, fn_die, sizeof(Dwarf_Die)); - return DWARF_CB_ABORT; + if (debuginfo__init_offline_dwarf(self, path) < 0) { + free(self); + self = NULL; } - return DWARF_CB_OK; -} - -/* Search a real subprogram including this line, */ -static Dwarf_Die *die_find_real_subprogram(Dwarf_Die *cu_die, Dwarf_Addr addr, - Dwarf_Die *die_mem) -{ - struct __addr_die_search_param ad; - ad.addr = addr; - ad.die_mem = die_mem; - /* dwarf_getscopes can't find subprogram. */ - if (!dwarf_getfuncs(cu_die, __die_search_func_cb, &ad, 0)) - return NULL; - else - return die_mem; -} - -/* die_find callback for inline function search */ -static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data) -{ - Dwarf_Addr *addr = data; - - if (dwarf_tag(die_mem) == DW_TAG_inlined_subroutine && - dwarf_haspc(die_mem, *addr)) - return DIE_FIND_CB_FOUND; - return DIE_FIND_CB_CONTINUE; + return self; } -/* Similar to dwarf_getfuncs, but returns inlined_subroutine if exists. */ -static Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, - Dwarf_Die *die_mem) +struct debuginfo *debuginfo__new_online_kernel(unsigned long addr) { - Dwarf_Die tmp_die; - - sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, &tmp_die); - if (!sp_die) + struct debuginfo *self = zalloc(sizeof(struct debuginfo)); + if (!self) return NULL; - /* Inlined function could be recursive. Trace it until fail */ - while (sp_die) { - memcpy(die_mem, sp_die, sizeof(Dwarf_Die)); - sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, - &tmp_die); - } - - return die_mem; -} - -/* Walker on lines (Note: line number will not be sorted) */ -typedef int (* line_walk_handler_t) (const char *fname, int lineno, - Dwarf_Addr addr, void *data); - -struct __line_walk_param { - const char *fname; - line_walk_handler_t handler; - void *data; - int retval; -}; - -static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data) -{ - struct __line_walk_param *lw = data; - Dwarf_Addr addr; - int lineno; - - if (dwarf_tag(in_die) == DW_TAG_inlined_subroutine) { - lineno = die_get_call_lineno(in_die); - if (lineno > 0 && dwarf_entrypc(in_die, &addr) == 0) { - lw->retval = lw->handler(lw->fname, lineno, addr, - lw->data); - if (lw->retval != 0) - return DIE_FIND_CB_FOUND; - } - } - return DIE_FIND_CB_SIBLING; -} - -/* Walk on lines of blocks included in given DIE */ -static int __die_walk_funclines(Dwarf_Die *sp_die, - line_walk_handler_t handler, void *data) -{ - struct __line_walk_param lw = { - .handler = handler, - .data = data, - .retval = 0, - }; - Dwarf_Die die_mem; - Dwarf_Addr addr; - int lineno; - - /* Handle function declaration line */ - lw.fname = dwarf_decl_file(sp_die); - if (lw.fname && dwarf_decl_line(sp_die, &lineno) == 0 && - dwarf_entrypc(sp_die, &addr) == 0) { - lw.retval = handler(lw.fname, lineno, addr, data); - if (lw.retval != 0) - goto done; - } - die_find_child(sp_die, __die_walk_funclines_cb, &lw, &die_mem); -done: - return lw.retval; -} - -static int __die_walk_culines_cb(Dwarf_Die *sp_die, void *data) -{ - struct __line_walk_param *lw = data; - - lw->retval = __die_walk_funclines(sp_die, lw->handler, lw->data); - if (lw->retval != 0) - return DWARF_CB_ABORT; - - return DWARF_CB_OK; -} - -/* - * Walk on lines inside given PDIE. If the PDIE is subprogram, walk only on - * the lines inside the subprogram, otherwise PDIE must be a CU DIE. - */ -static int die_walk_lines(Dwarf_Die *pdie, line_walk_handler_t handler, - void *data) -{ - Dwarf_Lines *lines; - Dwarf_Line *line; - Dwarf_Addr addr; - const char *fname; - int lineno, ret = 0; - Dwarf_Die die_mem, *cu_die; - size_t nlines, i; - - /* Get the CU die */ - if (dwarf_tag(pdie) == DW_TAG_subprogram) - cu_die = dwarf_diecu(pdie, &die_mem, NULL, NULL); - else - cu_die = pdie; - if (!cu_die) { - pr_debug2("Failed to get CU from subprogram\n"); - return -EINVAL; - } - - /* Get lines list in the CU */ - if (dwarf_getsrclines(cu_die, &lines, &nlines) != 0) { - pr_debug2("Failed to get source lines on this CU.\n"); - return -ENOENT; - } - pr_debug2("Get %zd lines from this CU\n", nlines); - - /* Walk on the lines on lines list */ - for (i = 0; i < nlines; i++) { - line = dwarf_onesrcline(lines, i); - if (line == NULL || - dwarf_lineno(line, &lineno) != 0 || - dwarf_lineaddr(line, &addr) != 0) { - pr_debug2("Failed to get line info. " - "Possible error in debuginfo.\n"); - continue; - } - /* Filter lines based on address */ - if (pdie != cu_die) - /* - * Address filtering - * The line is included in given function, and - * no inline block includes it. - */ - if (!dwarf_haspc(pdie, addr) || - die_find_inlinefunc(pdie, addr, &die_mem)) - continue; - /* Get source line */ - fname = dwarf_linesrc(line, NULL, NULL); - - ret = handler(fname, lineno, addr, data); - if (ret != 0) - return ret; - } - - /* - * Dwarf lines doesn't include function declarations and inlined - * subroutines. We have to check functions list or given function. - */ - if (pdie != cu_die) - ret = __die_walk_funclines(pdie, handler, data); - else { - struct __line_walk_param param = { - .handler = handler, - .data = data, - .retval = 0, - }; - dwarf_getfuncs(cu_die, __die_walk_culines_cb, ¶m, 0); - ret = param.retval; + if (debuginfo__init_online_kernel_dwarf(self, (Dwarf_Addr)addr) < 0) { + free(self); + self = NULL; } - return ret; -} - -struct __find_variable_param { - const char *name; - Dwarf_Addr addr; -}; - -static int __die_find_variable_cb(Dwarf_Die *die_mem, void *data) -{ - struct __find_variable_param *fvp = data; - int tag; - - tag = dwarf_tag(die_mem); - if ((tag == DW_TAG_formal_parameter || - tag == DW_TAG_variable) && - die_compare_name(die_mem, fvp->name)) - return DIE_FIND_CB_FOUND; - - if (dwarf_haspc(die_mem, fvp->addr)) - return DIE_FIND_CB_CONTINUE; - else - return DIE_FIND_CB_SIBLING; -} - -/* Find a variable called 'name' at given address */ -static Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name, - Dwarf_Addr addr, Dwarf_Die *die_mem) -{ - struct __find_variable_param fvp = { .name = name, .addr = addr}; - - return die_find_child(sp_die, __die_find_variable_cb, (void *)&fvp, - die_mem); -} - -static int __die_find_member_cb(Dwarf_Die *die_mem, void *data) -{ - const char *name = data; - - if ((dwarf_tag(die_mem) == DW_TAG_member) && - die_compare_name(die_mem, name)) - return DIE_FIND_CB_FOUND; - - return DIE_FIND_CB_SIBLING; -} - -/* Find a member called 'name' */ -static Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name, - Dwarf_Die *die_mem) -{ - return die_find_child(st_die, __die_find_member_cb, (void *)name, - die_mem); -} - -/* Get the name of given variable DIE */ -static int die_get_typename(Dwarf_Die *vr_die, char *buf, int len) -{ - Dwarf_Die type; - int tag, ret, ret2; - const char *tmp = ""; - - if (__die_get_real_type(vr_die, &type) == NULL) - return -ENOENT; - - tag = dwarf_tag(&type); - if (tag == DW_TAG_array_type || tag == DW_TAG_pointer_type) - tmp = "*"; - else if (tag == DW_TAG_subroutine_type) { - /* Function pointer */ - ret = snprintf(buf, len, "(function_type)"); - return (ret >= len) ? -E2BIG : ret; - } else { - if (!dwarf_diename(&type)) - return -ENOENT; - if (tag == DW_TAG_union_type) - tmp = "union "; - else if (tag == DW_TAG_structure_type) - tmp = "struct "; - /* Write a base name */ - ret = snprintf(buf, len, "%s%s", tmp, dwarf_diename(&type)); - return (ret >= len) ? -E2BIG : ret; - } - ret = die_get_typename(&type, buf, len); - if (ret > 0) { - ret2 = snprintf(buf + ret, len - ret, "%s", tmp); - ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret; - } - return ret; + return self; } -/* Get the name and type of given variable DIE, stored as "type\tname" */ -static int die_get_varname(Dwarf_Die *vr_die, char *buf, int len) +void debuginfo__delete(struct debuginfo *self) { - int ret, ret2; - - ret = die_get_typename(vr_die, buf, len); - if (ret < 0) { - pr_debug("Failed to get type, make it unknown.\n"); - ret = snprintf(buf, len, "(unknown_type)"); + if (self) { + if (self->dwfl) + dwfl_end(self->dwfl); + free(self); } - if (ret > 0) { - ret2 = snprintf(buf + ret, len - ret, "\t%s", - dwarf_diename(vr_die)); - ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret; - } - return ret; } /* @@ -897,6 +374,7 @@ static int convert_variable_type(Dwarf_Die *vr_die, struct probe_trace_arg_ref **ref_ptr = &tvar->ref; Dwarf_Die type; char buf[16]; + int bsize, boffs, total; int ret; /* TODO: check all types */ @@ -906,11 +384,15 @@ static int convert_variable_type(Dwarf_Die *vr_die, return (tvar->type == NULL) ? -ENOMEM : 0; } - if (die_get_bit_size(vr_die) != 0) { + bsize = dwarf_bitsize(vr_die); + if (bsize > 0) { /* This is a bitfield */ - ret = snprintf(buf, 16, "b%d@%d/%zd", die_get_bit_size(vr_die), - die_get_bit_offset(vr_die), - BYTES_TO_BITS(die_get_byte_size(vr_die))); + boffs = dwarf_bitoffset(vr_die); + total = dwarf_bytesize(vr_die); + if (boffs < 0 || total < 0) + return -ENOENT; + ret = snprintf(buf, 16, "b%d@%d/%zd", bsize, boffs, + BYTES_TO_BITS(total)); goto formatted; } @@ -958,10 +440,11 @@ static int convert_variable_type(Dwarf_Die *vr_die, return (tvar->type == NULL) ? -ENOMEM : 0; } - ret = BYTES_TO_BITS(die_get_byte_size(&type)); - if (!ret) + ret = dwarf_bytesize(&type); + if (ret <= 0) /* No size ... try to use default type */ return 0; + ret = BYTES_TO_BITS(ret); /* Check the bitwidth */ if (ret > MAX_BASIC_TYPE_BITS) { @@ -1025,7 +508,7 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname, else *ref_ptr = ref; } - ref->offset += die_get_byte_size(&type) * field->index; + ref->offset += dwarf_bytesize(&type) * field->index; if (!field->next) /* Save vr_die for converting types */ memcpy(die_mem, vr_die, sizeof(*die_mem)); @@ -1245,8 +728,7 @@ static int call_probe_finder(Dwarf_Die *sp_die, struct probe_finder *pf) /* If no real subprogram, find a real one */ if (!sp_die || dwarf_tag(sp_die) != DW_TAG_subprogram) { - sp_die = die_find_real_subprogram(&pf->cu_die, - pf->addr, &die_mem); + sp_die = die_find_realfunc(&pf->cu_die, pf->addr, &die_mem); if (!sp_die) { pr_warning("Failed to find probe point in any " "functions.\n"); @@ -1504,28 +986,18 @@ static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data) } /* Find probe points from debuginfo */ -static int find_probes(int fd, struct probe_finder *pf) +static int debuginfo__find_probes(struct debuginfo *self, + struct probe_finder *pf) { struct perf_probe_point *pp = &pf->pev->point; Dwarf_Off off, noff; size_t cuhl; Dwarf_Die *diep; - Dwarf *dbg = NULL; - Dwfl *dwfl; - Dwarf_Addr bias; /* Currently ignored */ int ret = 0; - dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias); - if (!dbg) { - pr_warning("No debug information found in the vmlinux - " - "please rebuild with CONFIG_DEBUG_INFO=y.\n"); - close(fd); /* Without dwfl_end(), fd isn't closed. */ - return -EBADF; - } - #if _ELFUTILS_PREREQ(0, 142) /* Get the call frame information from this dwarf */ - pf->cfi = dwarf_getcfi(dbg); + pf->cfi = dwarf_getcfi(self->dbg); #endif off = 0; @@ -1544,7 +1016,8 @@ static int find_probes(int fd, struct probe_finder *pf) .data = pf, }; - dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0); + dwarf_getpubnames(self->dbg, pubname_search_cb, + &pubname_param, 0); if (pubname_param.found) { ret = probe_point_search_cb(&pf->sp_die, &probe_param); if (ret) @@ -1553,9 +1026,9 @@ static int find_probes(int fd, struct probe_finder *pf) } /* Loop on CUs (Compilation Unit) */ - while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL)) { + while (!dwarf_nextcu(self->dbg, off, &noff, &cuhl, NULL, NULL, NULL)) { /* Get the DIE(Debugging Information Entry) of this CU */ - diep = dwarf_offdie(dbg, off + cuhl, &pf->cu_die); + diep = dwarf_offdie(self->dbg, off + cuhl, &pf->cu_die); if (!diep) continue; @@ -1582,8 +1055,6 @@ static int find_probes(int fd, struct probe_finder *pf) found: line_list__free(&pf->lcache); - if (dwfl) - dwfl_end(dwfl); return ret; } @@ -1629,8 +1100,9 @@ static int add_probe_trace_event(Dwarf_Die *sp_die, struct probe_finder *pf) } /* Find probe_trace_events specified by perf_probe_event from debuginfo */ -int find_probe_trace_events(int fd, struct perf_probe_event *pev, - struct probe_trace_event **tevs, int max_tevs) +int debuginfo__find_trace_events(struct debuginfo *self, + struct perf_probe_event *pev, + struct probe_trace_event **tevs, int max_tevs) { struct trace_event_finder tf = { .pf = {.pev = pev, .callback = add_probe_trace_event}, @@ -1645,7 +1117,7 @@ int find_probe_trace_events(int fd, struct perf_probe_event *pev, tf.tevs = *tevs; tf.ntevs = 0; - ret = find_probes(fd, &tf.pf); + ret = debuginfo__find_probes(self, &tf.pf); if (ret < 0) { free(*tevs); *tevs = NULL; @@ -1739,9 +1211,10 @@ out: } /* Find available variables at given probe point */ -int find_available_vars_at(int fd, struct perf_probe_event *pev, - struct variable_list **vls, int max_vls, - bool externs) +int debuginfo__find_available_vars_at(struct debuginfo *self, + struct perf_probe_event *pev, + struct variable_list **vls, + int max_vls, bool externs) { struct available_var_finder af = { .pf = {.pev = pev, .callback = add_available_vars}, @@ -1756,7 +1229,7 @@ int find_available_vars_at(int fd, struct perf_probe_event *pev, af.vls = *vls; af.nvls = 0; - ret = find_probes(fd, &af.pf); + ret = debuginfo__find_probes(self, &af.pf); if (ret < 0) { /* Free vlist for error */ while (af.nvls--) { @@ -1774,28 +1247,19 @@ int find_available_vars_at(int fd, struct perf_probe_event *pev, } /* Reverse search */ -int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt) +int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, + struct perf_probe_point *ppt) { Dwarf_Die cudie, spdie, indie; - Dwarf *dbg = NULL; - Dwfl *dwfl = NULL; - Dwarf_Addr _addr, baseaddr, bias = 0; + Dwarf_Addr _addr, baseaddr; const char *fname = NULL, *func = NULL, *tmp; int baseline = 0, lineno = 0, ret = 0; - /* Open the live linux kernel */ - dbg = dwfl_init_live_kernel_dwarf(addr, &dwfl, &bias); - if (!dbg) { - pr_warning("No debug information found in the vmlinux - " - "please rebuild with CONFIG_DEBUG_INFO=y.\n"); - ret = -EINVAL; - goto end; - } - /* Adjust address with bias */ - addr += bias; + addr += self->bias; + /* Find cu die */ - if (!dwarf_addrdie(dbg, (Dwarf_Addr)addr - bias, &cudie)) { + if (!dwarf_addrdie(self->dbg, (Dwarf_Addr)addr - self->bias, &cudie)) { pr_warning("Failed to find debug information for address %lx\n", addr); ret = -EINVAL; @@ -1807,7 +1271,7 @@ int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt) /* Don't care whether it failed or not */ /* Find a corresponding function (name, baseline and baseaddr) */ - if (die_find_real_subprogram(&cudie, (Dwarf_Addr)addr, &spdie)) { + if (die_find_realfunc(&cudie, (Dwarf_Addr)addr, &spdie)) { /* Get function entry information */ tmp = dwarf_diename(&spdie); if (!tmp || @@ -1871,8 +1335,6 @@ post: } } end: - if (dwfl) - dwfl_end(dwfl); if (ret == 0 && (fname || func)) ret = 1; /* Found a point */ return ret; @@ -1982,26 +1444,15 @@ static int find_line_range_by_func(struct line_finder *lf) return param.retval; } -int find_line_range(int fd, struct line_range *lr) +int debuginfo__find_line_range(struct debuginfo *self, struct line_range *lr) { struct line_finder lf = {.lr = lr, .found = 0}; int ret = 0; Dwarf_Off off = 0, noff; size_t cuhl; Dwarf_Die *diep; - Dwarf *dbg = NULL; - Dwfl *dwfl; - Dwarf_Addr bias; /* Currently ignored */ const char *comp_dir; - dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias); - if (!dbg) { - pr_warning("No debug information found in the vmlinux - " - "please rebuild with CONFIG_DEBUG_INFO=y.\n"); - close(fd); /* Without dwfl_end(), fd isn't closed. */ - return -EBADF; - } - /* Fastpath: lookup by function name from .debug_pubnames section */ if (lr->function) { struct pubname_callback_param pubname_param = { @@ -2010,7 +1461,8 @@ int find_line_range(int fd, struct line_range *lr) struct dwarf_callback_param line_range_param = { .data = (void *)&lf, .retval = 0}; - dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0); + dwarf_getpubnames(self->dbg, pubname_search_cb, + &pubname_param, 0); if (pubname_param.found) { line_range_search_cb(&lf.sp_die, &line_range_param); if (lf.found) @@ -2020,11 +1472,12 @@ int find_line_range(int fd, struct line_range *lr) /* Loop on CUs (Compilation Unit) */ while (!lf.found && ret >= 0) { - if (dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) != 0) + if (dwarf_nextcu(self->dbg, off, &noff, &cuhl, + NULL, NULL, NULL) != 0) break; /* Get the DIE(Debugging Information Entry) of this CU */ - diep = dwarf_offdie(dbg, off + cuhl, &lf.cu_die); + diep = dwarf_offdie(self->dbg, off + cuhl, &lf.cu_die); if (!diep) continue; @@ -2058,7 +1511,6 @@ found: } pr_debug("path: %s\n", lr->path); - dwfl_end(dwfl); return (ret < 0) ? ret : lf.found; } diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h index 605730a..c478b42 100644 --- a/tools/perf/util/probe-finder.h +++ b/tools/perf/util/probe-finder.h @@ -16,27 +16,42 @@ static inline int is_c_varname(const char *name) } #ifdef DWARF_SUPPORT + +#include "dwarf-aux.h" + +/* TODO: export debuginfo data structure even if no dwarf support */ + +/* debug information structure */ +struct debuginfo { + Dwarf *dbg; + Dwfl *dwfl; + Dwarf_Addr bias; +}; + +extern struct debuginfo *debuginfo__new(const char *path); +extern struct debuginfo *debuginfo__new_online_kernel(unsigned long addr); +extern void debuginfo__delete(struct debuginfo *self); + /* Find probe_trace_events specified by perf_probe_event from debuginfo */ -extern int find_probe_trace_events(int fd, struct perf_probe_event *pev, - struct probe_trace_event **tevs, - int max_tevs); +extern int debuginfo__find_trace_events(struct debuginfo *self, + struct perf_probe_event *pev, + struct probe_trace_event **tevs, + int max_tevs); /* Find a perf_probe_point from debuginfo */ -extern int find_perf_probe_point(unsigned long addr, - struct perf_probe_point *ppt); +extern int debuginfo__find_probe_point(struct debuginfo *self, + unsigned long addr, + struct perf_probe_point *ppt); /* Find a line range */ -extern int find_line_range(int fd, struct line_range *lr); +extern int debuginfo__find_line_range(struct debuginfo *self, + struct line_range *lr); /* Find available variables */ -extern int find_available_vars_at(int fd, struct perf_probe_event *pev, - struct variable_list **vls, int max_points, - bool externs); - -#include <dwarf.h> -#include <elfutils/libdw.h> -#include <elfutils/libdwfl.h> -#include <elfutils/version.h> +extern int debuginfo__find_available_vars_at(struct debuginfo *self, + struct perf_probe_event *pev, + struct variable_list **vls, + int max_points, bool externs); struct probe_finder { struct perf_probe_event *pev; /* Target probe event */ diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index a9ac050..8e0b5a3 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -247,7 +247,7 @@ struct pyrf_cpu_map { static int pyrf_cpu_map__init(struct pyrf_cpu_map *pcpus, PyObject *args, PyObject *kwargs) { - static char *kwlist[] = { "cpustr", NULL, NULL, }; + static char *kwlist[] = { "cpustr", NULL }; char *cpustr = NULL; if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|s", @@ -316,7 +316,7 @@ struct pyrf_thread_map { static int pyrf_thread_map__init(struct pyrf_thread_map *pthreads, PyObject *args, PyObject *kwargs) { - static char *kwlist[] = { "pid", "tid", NULL, NULL, }; + static char *kwlist[] = { "pid", "tid", NULL }; int pid = -1, tid = -1; if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ii", @@ -418,7 +418,9 @@ static int pyrf_evsel__init(struct pyrf_evsel *pevsel, "wakeup_events", "bp_type", "bp_addr", - "bp_len", NULL, NULL, }; + "bp_len", + NULL + }; u64 sample_period = 0; u32 disabled = 0, inherit = 0, @@ -499,7 +501,7 @@ static PyObject *pyrf_evsel__open(struct pyrf_evsel *pevsel, struct thread_map *threads = NULL; PyObject *pcpus = NULL, *pthreads = NULL; int group = 0, inherit = 0; - static char *kwlist[] = {"cpus", "threads", "group", "inherit", NULL, NULL}; + static char *kwlist[] = { "cpus", "threads", "group", "inherit", NULL }; if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist, &pcpus, &pthreads, &group, &inherit)) @@ -582,8 +584,7 @@ static PyObject *pyrf_evlist__mmap(struct pyrf_evlist *pevlist, PyObject *args, PyObject *kwargs) { struct perf_evlist *evlist = &pevlist->evlist; - static char *kwlist[] = {"pages", "overwrite", - NULL, NULL}; + static char *kwlist[] = { "pages", "overwrite", NULL }; int pages = 128, overwrite = false; if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ii", kwlist, @@ -603,7 +604,7 @@ static PyObject *pyrf_evlist__poll(struct pyrf_evlist *pevlist, PyObject *args, PyObject *kwargs) { struct perf_evlist *evlist = &pevlist->evlist; - static char *kwlist[] = {"timeout", NULL, NULL}; + static char *kwlist[] = { "timeout", NULL }; int timeout = -1, n; if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|i", kwlist, &timeout)) @@ -674,7 +675,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist, struct perf_evlist *evlist = &pevlist->evlist; union perf_event *event; int sample_id_all = 1, cpu; - static char *kwlist[] = {"cpu", "sample_id_all", NULL, NULL}; + static char *kwlist[] = { "cpu", "sample_id_all", NULL }; int err; if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|i", kwlist, diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index f5a8fbd..72458d9 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -12,6 +12,7 @@ #include "session.h" #include "sort.h" #include "util.h" +#include "cpumap.h" static int perf_session__open(struct perf_session *self, bool force) { @@ -247,9 +248,14 @@ int perf_session__resolve_callchain(struct perf_session *self, callchain_cursor_reset(&self->callchain_cursor); for (i = 0; i < chain->nr; i++) { - u64 ip = chain->ips[i]; + u64 ip; struct addr_location al; + if (callchain_param.order == ORDER_CALLEE) + ip = chain->ips[i]; + else + ip = chain->ips[chain->nr - i - 1]; + if (ip >= PERF_CONTEXT_MAX) { switch (ip) { case PERF_CONTEXT_HV: @@ -407,20 +413,26 @@ static void perf_event__read_swap(union perf_event *event) event->read.id = bswap_64(event->read.id); } -static void perf_event__attr_swap(union perf_event *event) +/* exported for swapping attributes in file header */ +void perf_event__attr_swap(struct perf_event_attr *attr) +{ + attr->type = bswap_32(attr->type); + attr->size = bswap_32(attr->size); + attr->config = bswap_64(attr->config); + attr->sample_period = bswap_64(attr->sample_period); + attr->sample_type = bswap_64(attr->sample_type); + attr->read_format = bswap_64(attr->read_format); + attr->wakeup_events = bswap_32(attr->wakeup_events); + attr->bp_type = bswap_32(attr->bp_type); + attr->bp_addr = bswap_64(attr->bp_addr); + attr->bp_len = bswap_64(attr->bp_len); +} + +static void perf_event__hdr_attr_swap(union perf_event *event) { size_t size; - event->attr.attr.type = bswap_32(event->attr.attr.type); - event->attr.attr.size = bswap_32(event->attr.attr.size); - event->attr.attr.config = bswap_64(event->attr.attr.config); - event->attr.attr.sample_period = bswap_64(event->attr.attr.sample_period); - event->attr.attr.sample_type = bswap_64(event->attr.attr.sample_type); - event->attr.attr.read_format = bswap_64(event->attr.attr.read_format); - event->attr.attr.wakeup_events = bswap_32(event->attr.attr.wakeup_events); - event->attr.attr.bp_type = bswap_32(event->attr.attr.bp_type); - event->attr.attr.bp_addr = bswap_64(event->attr.attr.bp_addr); - event->attr.attr.bp_len = bswap_64(event->attr.attr.bp_len); + perf_event__attr_swap(&event->attr.attr); size = event->header.size; size -= (void *)&event->attr.id - (void *)event; @@ -448,7 +460,7 @@ static perf_event__swap_op perf_event__swap_ops[] = { [PERF_RECORD_LOST] = perf_event__all64_swap, [PERF_RECORD_READ] = perf_event__read_swap, [PERF_RECORD_SAMPLE] = perf_event__all64_swap, - [PERF_RECORD_HEADER_ATTR] = perf_event__attr_swap, + [PERF_RECORD_HEADER_ATTR] = perf_event__hdr_attr_swap, [PERF_RECORD_HEADER_EVENT_TYPE] = perf_event__event_type_swap, [PERF_RECORD_HEADER_TRACING_DATA] = perf_event__tracing_data_swap, [PERF_RECORD_HEADER_BUILD_ID] = NULL, @@ -708,9 +720,9 @@ static void dump_sample(struct perf_session *session, union perf_event *event, if (!dump_trace) return; - printf("(IP, %d): %d/%d: %#" PRIx64 " period: %" PRIu64 "\n", + printf("(IP, %d): %d/%d: %#" PRIx64 " period: %" PRIu64 " addr: %#" PRIx64 "\n", event->header.misc, sample->pid, sample->tid, sample->ip, - sample->period); + sample->period, sample->addr); if (session->sample_type & PERF_SAMPLE_CALLCHAIN) callchain__printf(sample); @@ -1202,9 +1214,10 @@ struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session, return NULL; } -void perf_session__print_symbols(union perf_event *event, - struct perf_sample *sample, - struct perf_session *session) +void perf_session__print_ip(union perf_event *event, + struct perf_sample *sample, + struct perf_session *session, + int print_sym, int print_dso) { struct addr_location al; const char *symname, *dsoname; @@ -1233,32 +1246,83 @@ void perf_session__print_symbols(union perf_event *event, if (!node) break; - if (node->sym && node->sym->name) - symname = node->sym->name; + printf("\t%16" PRIx64, node->ip); + if (print_sym) { + if (node->sym && node->sym->name) + symname = node->sym->name; + else + symname = ""; + + printf(" %s", symname); + } + if (print_dso) { + if (node->map && node->map->dso && node->map->dso->name) + dsoname = node->map->dso->name; + else + dsoname = ""; + + printf(" (%s)", dsoname); + } + printf("\n"); + + callchain_cursor_advance(cursor); + } + + } else { + printf("%16" PRIx64, sample->ip); + if (print_sym) { + if (al.sym && al.sym->name) + symname = al.sym->name; else symname = ""; - if (node->map && node->map->dso && node->map->dso->name) - dsoname = node->map->dso->name; + printf(" %s", symname); + } + + if (print_dso) { + if (al.map && al.map->dso && al.map->dso->name) + dsoname = al.map->dso->name; else dsoname = ""; - printf("\t%16" PRIx64 " %s (%s)\n", node->ip, symname, dsoname); + printf(" (%s)", dsoname); + } + } +} - callchain_cursor_advance(cursor); +int perf_session__cpu_bitmap(struct perf_session *session, + const char *cpu_list, unsigned long *cpu_bitmap) +{ + int i; + struct cpu_map *map; + + for (i = 0; i < PERF_TYPE_MAX; ++i) { + struct perf_evsel *evsel; + + evsel = perf_session__find_first_evtype(session, i); + if (!evsel) + continue; + + if (!(evsel->attr.sample_type & PERF_SAMPLE_CPU)) { + pr_err("File does not contain CPU events. " + "Remove -c option to proceed.\n"); + return -1; } + } - } else { - if (al.sym && al.sym->name) - symname = al.sym->name; - else - symname = ""; + map = cpu_map__new(cpu_list); - if (al.map && al.map->dso && al.map->dso->name) - dsoname = al.map->dso->name; - else - dsoname = ""; + for (i = 0; i < map->nr; i++) { + int cpu = map->map[i]; + + if (cpu >= MAX_NR_CPUS) { + pr_err("Requested CPU %d too large. " + "Consider raising MAX_NR_CPUS\n", cpu); + return -1; + } - printf("%16" PRIx64 " %s (%s)", al.addr, symname, dsoname); + set_bit(cpu, cpu_bitmap); } + + return 0; } diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index 66d4e14..170601e 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -112,6 +112,7 @@ int perf_session__set_kallsyms_ref_reloc_sym(struct map **maps, u64 addr); void mem_bswap_64(void *src, int byte_size); +void perf_event__attr_swap(struct perf_event_attr *attr); int perf_session__create_kernel_maps(struct perf_session *self); @@ -167,8 +168,12 @@ static inline int perf_session__parse_sample(struct perf_session *session, struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session, unsigned int type); -void perf_session__print_symbols(union perf_event *event, +void perf_session__print_ip(union perf_event *event, struct perf_sample *sample, - struct perf_session *session); + struct perf_session *session, + int print_sym, int print_dso); + +int perf_session__cpu_bitmap(struct perf_session *session, + const char *cpu_list, unsigned long *cpu_bitmap); #endif /* __PERF_SESSION_H */ diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index f44fa54..401e220 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -15,95 +15,6 @@ char * field_sep; LIST_HEAD(hist_entry__sort_list); -static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf, - size_t size, unsigned int width); -static int hist_entry__comm_snprintf(struct hist_entry *self, char *bf, - size_t size, unsigned int width); -static int hist_entry__dso_snprintf(struct hist_entry *self, char *bf, - size_t size, unsigned int width); -static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf, - size_t size, unsigned int width); -static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf, - size_t size, unsigned int width); -static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf, - size_t size, unsigned int width); - -struct sort_entry sort_thread = { - .se_header = "Command: Pid", - .se_cmp = sort__thread_cmp, - .se_snprintf = hist_entry__thread_snprintf, - .se_width_idx = HISTC_THREAD, -}; - -struct sort_entry sort_comm = { - .se_header = "Command", - .se_cmp = sort__comm_cmp, - .se_collapse = sort__comm_collapse, - .se_snprintf = hist_entry__comm_snprintf, - .se_width_idx = HISTC_COMM, -}; - -struct sort_entry sort_dso = { - .se_header = "Shared Object", - .se_cmp = sort__dso_cmp, - .se_snprintf = hist_entry__dso_snprintf, - .se_width_idx = HISTC_DSO, -}; - -struct sort_entry sort_sym = { - .se_header = "Symbol", - .se_cmp = sort__sym_cmp, - .se_snprintf = hist_entry__sym_snprintf, - .se_width_idx = HISTC_SYMBOL, -}; - -struct sort_entry sort_parent = { - .se_header = "Parent symbol", - .se_cmp = sort__parent_cmp, - .se_snprintf = hist_entry__parent_snprintf, - .se_width_idx = HISTC_PARENT, -}; - -struct sort_entry sort_cpu = { - .se_header = "CPU", - .se_cmp = sort__cpu_cmp, - .se_snprintf = hist_entry__cpu_snprintf, - .se_width_idx = HISTC_CPU, -}; - -struct sort_dimension { - const char *name; - struct sort_entry *entry; - int taken; -}; - -static struct sort_dimension sort_dimensions[] = { - { .name = "pid", .entry = &sort_thread, }, - { .name = "comm", .entry = &sort_comm, }, - { .name = "dso", .entry = &sort_dso, }, - { .name = "symbol", .entry = &sort_sym, }, - { .name = "parent", .entry = &sort_parent, }, - { .name = "cpu", .entry = &sort_cpu, }, -}; - -int64_t cmp_null(void *l, void *r) -{ - if (!l && !r) - return 0; - else if (!l) - return -1; - else - return 1; -} - -/* --sort pid */ - -int64_t -sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) -{ - return right->thread->pid - left->thread->pid; -} - static int repsep_snprintf(char *bf, size_t size, const char *fmt, ...) { int n; @@ -125,6 +36,24 @@ static int repsep_snprintf(char *bf, size_t size, const char *fmt, ...) return n; } +static int64_t cmp_null(void *l, void *r) +{ + if (!l && !r) + return 0; + else if (!l) + return -1; + else + return 1; +} + +/* --sort pid */ + +static int64_t +sort__thread_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf, size_t size, unsigned int width) { @@ -132,15 +61,50 @@ static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf, self->thread->comm ?: "", self->thread->pid); } +struct sort_entry sort_thread = { + .se_header = "Command: Pid", + .se_cmp = sort__thread_cmp, + .se_snprintf = hist_entry__thread_snprintf, + .se_width_idx = HISTC_THREAD, +}; + +/* --sort comm */ + +static int64_t +sort__comm_cmp(struct hist_entry *left, struct hist_entry *right) +{ + return right->thread->pid - left->thread->pid; +} + +static int64_t +sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) +{ + char *comm_l = left->thread->comm; + char *comm_r = right->thread->comm; + + if (!comm_l || !comm_r) + return cmp_null(comm_l, comm_r); + + return strcmp(comm_l, comm_r); +} + static int hist_entry__comm_snprintf(struct hist_entry *self, char *bf, size_t size, unsigned int width) { return repsep_snprintf(bf, size, "%*s", width, self->thread->comm); } +struct sort_entry sort_comm = { + .se_header = "Command", + .se_cmp = sort__comm_cmp, + .se_collapse = sort__comm_collapse, + .se_snprintf = hist_entry__comm_snprintf, + .se_width_idx = HISTC_COMM, +}; + /* --sort dso */ -int64_t +static int64_t sort__dso_cmp(struct hist_entry *left, struct hist_entry *right) { struct dso *dso_l = left->ms.map ? left->ms.map->dso : NULL; @@ -173,9 +137,16 @@ static int hist_entry__dso_snprintf(struct hist_entry *self, char *bf, return repsep_snprintf(bf, size, "%-*s", width, "[unknown]"); } +struct sort_entry sort_dso = { + .se_header = "Shared Object", + .se_cmp = sort__dso_cmp, + .se_snprintf = hist_entry__dso_snprintf, + .se_width_idx = HISTC_DSO, +}; + /* --sort symbol */ -int64_t +static int64_t sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) { u64 ip_l, ip_r; @@ -211,29 +182,16 @@ static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf, return ret; } -/* --sort comm */ - -int64_t -sort__comm_cmp(struct hist_entry *left, struct hist_entry *right) -{ - return right->thread->pid - left->thread->pid; -} - -int64_t -sort__comm_collapse(struct hist_entry *left, struct hist_entry *right) -{ - char *comm_l = left->thread->comm; - char *comm_r = right->thread->comm; - - if (!comm_l || !comm_r) - return cmp_null(comm_l, comm_r); - - return strcmp(comm_l, comm_r); -} +struct sort_entry sort_sym = { + .se_header = "Symbol", + .se_cmp = sort__sym_cmp, + .se_snprintf = hist_entry__sym_snprintf, + .se_width_idx = HISTC_SYMBOL, +}; /* --sort parent */ -int64_t +static int64_t sort__parent_cmp(struct hist_entry *left, struct hist_entry *right) { struct symbol *sym_l = left->parent; @@ -252,9 +210,16 @@ static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf, self->parent ? self->parent->name : "[other]"); } +struct sort_entry sort_parent = { + .se_header = "Parent symbol", + .se_cmp = sort__parent_cmp, + .se_snprintf = hist_entry__parent_snprintf, + .se_width_idx = HISTC_PARENT, +}; + /* --sort cpu */ -int64_t +static int64_t sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right) { return right->cpu - left->cpu; @@ -266,6 +231,28 @@ static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf, return repsep_snprintf(bf, size, "%-*d", width, self->cpu); } +struct sort_entry sort_cpu = { + .se_header = "CPU", + .se_cmp = sort__cpu_cmp, + .se_snprintf = hist_entry__cpu_snprintf, + .se_width_idx = HISTC_CPU, +}; + +struct sort_dimension { + const char *name; + struct sort_entry *entry; + int taken; +}; + +static struct sort_dimension sort_dimensions[] = { + { .name = "pid", .entry = &sort_thread, }, + { .name = "comm", .entry = &sort_comm, }, + { .name = "dso", .entry = &sort_dso, }, + { .name = "symbol", .entry = &sort_sym, }, + { .name = "parent", .entry = &sort_parent, }, + { .name = "cpu", .entry = &sort_cpu, }, +}; + int sort_dimension__add(const char *tok) { unsigned int i; @@ -273,15 +260,9 @@ int sort_dimension__add(const char *tok) for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) { struct sort_dimension *sd = &sort_dimensions[i]; - if (sd->taken) - continue; - if (strncasecmp(tok, sd->name, strlen(tok))) continue; - if (sd->entry->se_collapse) - sort__need_collapse = 1; - if (sd->entry == &sort_parent) { int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED); if (ret) { @@ -294,6 +275,12 @@ int sort_dimension__add(const char *tok) sort__has_parent = 1; } + if (sd->taken) + return 0; + + if (sd->entry->se_collapse) + sort__need_collapse = 1; + if (list_empty(&hist_entry__sort_list)) { if (!strcmp(sd->name, "pid")) sort__first_dimension = SORT_PID; diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h index 0b91053..77d0388 100644 --- a/tools/perf/util/sort.h +++ b/tools/perf/util/sort.h @@ -103,20 +103,6 @@ extern struct sort_entry sort_thread; extern struct list_head hist_entry__sort_list; void setup_sorting(const char * const usagestr[], const struct option *opts); - -extern size_t sort__thread_print(FILE *, struct hist_entry *, unsigned int); -extern size_t sort__comm_print(FILE *, struct hist_entry *, unsigned int); -extern size_t sort__dso_print(FILE *, struct hist_entry *, unsigned int); -extern size_t sort__sym_print(FILE *, struct hist_entry *, unsigned int __used); -extern int64_t cmp_null(void *, void *); -extern int64_t sort__thread_cmp(struct hist_entry *, struct hist_entry *); -extern int64_t sort__comm_cmp(struct hist_entry *, struct hist_entry *); -extern int64_t sort__comm_collapse(struct hist_entry *, struct hist_entry *); -extern int64_t sort__dso_cmp(struct hist_entry *, struct hist_entry *); -extern int64_t sort__sym_cmp(struct hist_entry *, struct hist_entry *); -extern int64_t sort__parent_cmp(struct hist_entry *, struct hist_entry *); -int64_t sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right); -extern size_t sort__parent_print(FILE *, struct hist_entry *, unsigned int); extern int sort_dimension__add(const char *); void sort_entry__setup_elide(struct sort_entry *self, struct strlist *list, const char *list_name, FILE *fp); diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c index b9a985da..d583638 100644 --- a/tools/perf/util/string.c +++ b/tools/perf/util/string.c @@ -294,3 +294,22 @@ bool strlazymatch(const char *str, const char *pat) { return __match_glob(str, pat, true); } + +/** + * strtailcmp - Compare the tail of two strings + * @s1: 1st string to be compared + * @s2: 2nd string to be compared + * + * Return 0 if whole of either string is same as another's tail part. + */ +int strtailcmp(const char *s1, const char *s2) +{ + int i1 = strlen(s1); + int i2 = strlen(s2); + while (--i1 >= 0 && --i2 >= 0) { + if (s1[i1] != s2[i2]) + return s1[i1] - s2[i2]; + } + return 0; +} + diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c index 35729f4..3403f81 100644 --- a/tools/perf/util/trace-event-info.c +++ b/tools/perf/util/trace-event-info.c @@ -183,106 +183,59 @@ int bigendian(void) return *ptr == 0x01020304; } -static unsigned long long copy_file_fd(int fd) +/* unfortunately, you can not stat debugfs or proc files for size */ +static void record_file(const char *file, size_t hdr_sz) { unsigned long long size = 0; - char buf[BUFSIZ]; - int r; - - do { - r = read(fd, buf, BUFSIZ); - if (r > 0) { - size += r; - write_or_die(buf, r); - } - } while (r > 0); - - return size; -} - -static unsigned long long copy_file(const char *file) -{ - unsigned long long size = 0; - int fd; + char buf[BUFSIZ], *sizep; + off_t hdr_pos = lseek(output_fd, 0, SEEK_CUR); + int r, fd; fd = open(file, O_RDONLY); if (fd < 0) die("Can't read '%s'", file); - size = copy_file_fd(fd); - close(fd); - return size; -} - -static unsigned long get_size_fd(int fd) -{ - unsigned long long size = 0; - char buf[BUFSIZ]; - int r; + /* put in zeros for file size, then fill true size later */ + write_or_die(&size, hdr_sz); do { r = read(fd, buf, BUFSIZ); - if (r > 0) + if (r > 0) { size += r; + write_or_die(buf, r); + } } while (r > 0); - - lseek(fd, 0, SEEK_SET); - - return size; -} - -static unsigned long get_size(const char *file) -{ - unsigned long long size = 0; - int fd; - - fd = open(file, O_RDONLY); - if (fd < 0) - die("Can't read '%s'", file); - size = get_size_fd(fd); close(fd); - return size; + /* ugh, handle big-endian hdr_size == 4 */ + sizep = (char*)&size; + if (bigendian()) + sizep += sizeof(u64) - hdr_sz; + + if (pwrite(output_fd, sizep, hdr_sz, hdr_pos) < 0) + die("writing to %s", output_file); } static void read_header_files(void) { - unsigned long long size, check_size; char *path; - int fd; + struct stat st; path = get_tracing_file("events/header_page"); - fd = open(path, O_RDONLY); - if (fd < 0) + if (stat(path, &st) < 0) die("can't read '%s'", path); - /* unfortunately, you can not stat debugfs files for size */ - size = get_size_fd(fd); - write_or_die("header_page", 12); - write_or_die(&size, 8); - check_size = copy_file_fd(fd); - close(fd); - - if (size != check_size) - die("wrong size for '%s' size=%lld read=%lld", - path, size, check_size); + record_file(path, 8); put_tracing_file(path); path = get_tracing_file("events/header_event"); - fd = open(path, O_RDONLY); - if (fd < 0) + if (stat(path, &st) < 0) die("can't read '%s'", path); - size = get_size_fd(fd); - write_or_die("header_event", 13); - write_or_die(&size, 8); - check_size = copy_file_fd(fd); - if (size != check_size) - die("wrong size for '%s'", path); + record_file(path, 8); put_tracing_file(path); - close(fd); } static bool name_in_tp_list(char *sys, struct tracepoint_path *tps) @@ -298,7 +251,6 @@ static bool name_in_tp_list(char *sys, struct tracepoint_path *tps) static void copy_event_system(const char *sys, struct tracepoint_path *tps) { - unsigned long long size, check_size; struct dirent *dent; struct stat st; char *format; @@ -338,14 +290,8 @@ static void copy_event_system(const char *sys, struct tracepoint_path *tps) sprintf(format, "%s/%s/format", sys, dent->d_name); ret = stat(format, &st); - if (ret >= 0) { - /* unfortunately, you can not stat debugfs files for size */ - size = get_size(format); - write_or_die(&size, 8); - check_size = copy_file(format); - if (size != check_size) - die("error in size of file '%s'", format); - } + if (ret >= 0) + record_file(format, 8); free(format); } @@ -426,7 +372,7 @@ static void read_event_files(struct tracepoint_path *tps) static void read_proc_kallsyms(void) { - unsigned int size, check_size; + unsigned int size; const char *path = "/proc/kallsyms"; struct stat st; int ret; @@ -438,17 +384,12 @@ static void read_proc_kallsyms(void) write_or_die(&size, 4); return; } - size = get_size(path); - write_or_die(&size, 4); - check_size = copy_file(path); - if (size != check_size) - die("error in size of file '%s'", path); - + record_file(path, 4); } static void read_ftrace_printk(void) { - unsigned int size, check_size; + unsigned int size; char *path; struct stat st; int ret; @@ -461,11 +402,8 @@ static void read_ftrace_printk(void) write_or_die(&size, 4); goto out; } - size = get_size(path); - write_or_die(&size, 4); - check_size = copy_file(path); - if (size != check_size) - die("error in size of file '%s'", path); + record_file(path, 4); + out: put_tracing_file(path); } diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h index fc78428..0128906 100644 --- a/tools/perf/util/util.h +++ b/tools/perf/util/util.h @@ -238,6 +238,7 @@ char **argv_split(const char *str, int *argcp); void argv_free(char **argv); bool strglobmatch(const char *str, const char *pat); bool strlazymatch(const char *str, const char *pat); +int strtailcmp(const char *s1, const char *s2); unsigned long convert_unit(unsigned long value, char *unit); int readn(int fd, void *buf, size_t size); diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore new file mode 100644 index 0000000..8a83dd2 --- /dev/null +++ b/tools/power/cpupower/.gitignore @@ -0,0 +1,22 @@ +.libs +libcpupower.so +libcpupower.so.0 +libcpupower.so.0.0.0 +build/ccdv +cpufreq-info +cpufreq-set +cpufreq-aperf +lib/.libs +lib/cpufreq.lo +lib/cpufreq.o +lib/proc.lo +lib/proc.o +lib/sysfs.lo +lib/sysfs.o +po/cpupowerutils.pot +po/*.gmo +utils/cpufreq-info.o +utils/cpufreq-set.o +utils/cpufreq-aperf.o +cpupower +bench/cpufreq-bench diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile new file mode 100644 index 0000000..94c2cf0 --- /dev/null +++ b/tools/power/cpupower/Makefile @@ -0,0 +1,279 @@ +# Makefile for cpupower +# +# Copyright (C) 2005,2006 Dominik Brodowski <linux@dominikbrodowski.net> +# +# Based largely on the Makefile for udev by: +# +# Copyright (C) 2003,2004 Greg Kroah-Hartman <greg@kroah.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +# --- CONFIGURATION BEGIN --- + +# Set the following to `true' to make a unstripped, unoptimized +# binary. Leave this set to `false' for production use. +DEBUG ?= false + +# make the build silent. Set this to something else to make it noisy again. +V ?= false + +# Internationalization support (output in different languages). +# Requires gettext. +NLS ?= true + +# Set the following to 'true' to build/install the +# cpufreq-bench benchmarking tool +CPUFRQ_BENCH ?= true + +# Prefix to the directories we're installing to +DESTDIR ?= + +# --- CONFIGURATION END --- + + + +# Package-related definitions. Distributions can modify the version +# and _should_ modify the PACKAGE_BUGREPORT definition + +VERSION= $(shell ./utils/version-gen.sh) +LIB_MAJ= 0.0.0 +LIB_MIN= 0 + +PACKAGE = cpupower +PACKAGE_BUGREPORT = cpufreq@vger.kernel.org +LANGUAGES = de fr it cs pt + + +# Directory definitions. These are default and most probably +# do not need to be changed. Please note that DESTDIR is +# added in front of any of them + +bindir ?= /usr/bin +sbindir ?= /usr/sbin +mandir ?= /usr/man +includedir ?= /usr/include +libdir ?= /usr/lib +localedir ?= /usr/share/locale +docdir ?= /usr/share/doc/packages/cpupower +confdir ?= /etc/ + +# Toolchain: what tools do we use, and what options do they need: + +CP = cp -fpR +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} + +# If you are running a cross compiler, you may want to set this +# to something more interesting, like "arm-linux-". If you want +# to compile vs uClibc, that can be done here as well. +CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc- +CC = $(CROSS)gcc +LD = $(CROSS)gcc +AR = $(CROSS)ar +STRIP = $(CROSS)strip +RANLIB = $(CROSS)ranlib +HOSTCC = gcc + + +# Now we set up the build system +# + +# set up PWD so that older versions of make will work with our build. +PWD = $(shell pwd) + +GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo po/$$HLANG.gmo; done;} + +export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS + +# check if compiler option is supported +cc-supports = ${shell if $(CC) ${1} -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; fi;} + +# use '-Os' optimization if available, else use -O2 +OPTIMIZATION := $(call cc-supports,-Os,-O2) + +WARNINGS := -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare +WARNINGS += $(call cc-supports,-Wno-pointer-sign) +WARNINGS += $(call cc-supports,-Wdeclaration-after-statement) +WARNINGS += -Wshadow + +CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \ + -DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE + +UTIL_OBJS = utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \ + utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \ + utils/helpers/pci.o utils/helpers/bitmask.o \ + utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \ + utils/idle_monitor/amd_fam14h_idle.o utils/idle_monitor/cpuidle_sysfs.o \ + utils/idle_monitor/mperf_monitor.o utils/idle_monitor/cpupower-monitor.o \ + utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \ + utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o + +UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \ + utils/helpers/bitmask.h \ + utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def + +UTIL_SRC := $(UTIL_OBJS:.o=.c) + +LIB_HEADERS = lib/cpufreq.h lib/sysfs.h +LIB_SRC = lib/cpufreq.c lib/sysfs.c +LIB_OBJS = lib/cpufreq.o lib/sysfs.o + +CFLAGS += -pipe + +ifeq ($(strip $(NLS)),true) + INSTALL_NLS += install-gmo + COMPILE_NLS += create-gmo +endif + +ifeq ($(strip $(CPUFRQ_BENCH)),true) + INSTALL_BENCH += install-bench + COMPILE_BENCH += compile-bench +endif + +CFLAGS += $(WARNINGS) + +ifeq ($(strip $(V)),false) + QUIET=@ + ECHO=@echo +else + QUIET= + ECHO=@\# +endif +export QUIET ECHO + +# if DEBUG is enabled, then we do not strip or optimize +ifeq ($(strip $(DEBUG)),true) + CFLAGS += -O1 -g -DDEBUG + STRIPCMD = /bin/true -Since_we_are_debugging +else + CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer + STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment +endif + + +# the actual make rules + +all: libcpupower cpupower $(COMPILE_NLS) $(COMPILE_BENCH) + +lib/%.o: $(LIB_SRC) $(LIB_HEADERS) + $(ECHO) " CC " $@ + $(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c + +libcpupower.so.$(LIB_MAJ): $(LIB_OBJS) + $(ECHO) " LD " $@ + $(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \ + -Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS) + @ln -sf $@ libcpupower.so + @ln -sf $@ libcpupower.so.$(LIB_MIN) + +libcpupower: libcpupower.so.$(LIB_MAJ) + +# Let all .o files depend on its .c file and all headers +# Might be worth to put this into utils/Makefile at some point of time +$(UTIL_OBJS): $(UTIL_HEADERS) + +.c.o: + $(ECHO) " CC " $@ + $(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c + +cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ) + $(ECHO) " CC " $@ + $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L. -o $@ $(UTIL_OBJS) + $(QUIET) $(STRIPCMD) $@ + +po/$(PACKAGE).pot: $(UTIL_SRC) + $(ECHO) " GETTEXT " $@ + $(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \ + --keyword=_ --keyword=N_ $(UTIL_SRC) && \ + test -f $(PACKAGE).po && \ + mv -f $(PACKAGE).po po/$(PACKAGE).pot + +po/%.gmo: po/%.po + $(ECHO) " MSGFMT " $@ + $(QUIET) msgfmt -o $@ po/$*.po + +create-gmo: ${GMO_FILES} + +update-po: po/$(PACKAGE).pot + $(ECHO) " MSGMRG " $@ + $(QUIET) @for HLANG in $(LANGUAGES); do \ + echo -n "Updating $$HLANG "; \ + if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \ + po/$$HLANG.new.po; then \ + mv -f po/$$HLANG.new.po po/$$HLANG.po; \ + else \ + echo "msgmerge for $$HLANG failed!"; \ + rm -f po/$$HLANG.new.po; \ + fi; \ + done; + +compile-bench: libcpupower.so.$(LIB_MAJ) + @V=$(V) confdir=$(confdir) $(MAKE) -C bench + +clean: + -find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \ + | xargs rm -f + -rm -f $(UTIL_BINS) + -rm -f $(IDLE_OBJS) + -rm -f cpupower + -rm -f libcpupower.so* + -rm -rf po/*.gmo po/*.pot + $(MAKE) -C bench clean + + +install-lib: + $(INSTALL) -d $(DESTDIR)${libdir} + $(CP) libcpupower.so* $(DESTDIR)${libdir}/ + $(INSTALL) -d $(DESTDIR)${includedir} + $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h + +install-tools: + $(INSTALL) -d $(DESTDIR)${bindir} + $(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir} + +install-man: + $(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1 + $(INSTALL_DATA) -D man/cpupower-frequency-set.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1 + $(INSTALL_DATA) -D man/cpupower-frequency-info.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1 + $(INSTALL_DATA) -D man/cpupower-set.1 $(DESTDIR)${mandir}/man1/cpupower-set.1 + $(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1 + $(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1 + +install-gmo: + $(INSTALL) -d $(DESTDIR)${localedir} + for HLANG in $(LANGUAGES); do \ + echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \ + $(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ + done; + +install-bench: + @#DESTDIR must be set from outside to survive + @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install + +install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH) + +uninstall: + - rm -f $(DESTDIR)${libdir}/libcpupower.* + - rm -f $(DESTDIR)${includedir}/cpufreq.h + - rm -f $(DESTDIR)${bindir}/utils/cpupower + - rm -f $(DESTDIR)${mandir}/man1/cpufreq-set.1 + - rm -f $(DESTDIR)${mandir}/man1/cpufreq-info.1 + - for HLANG in $(LANGUAGES); do \ + rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ + done; + +.PHONY: all utils libcpupower update-po create-gmo install-lib install-tools install-man install-gmo install uninstall clean diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README new file mode 100644 index 0000000..fd9d4c0 --- /dev/null +++ b/tools/power/cpupower/README @@ -0,0 +1,49 @@ +The cpufrequtils package (homepage: +http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html ) +consists of the following elements: + +requirements +------------ + +On x86 pciutils is needed at runtime (-lpci). +For compilation pciutils-devel (pci/pci.h) and a gcc version +providing cpuid.h is needed. +For both it's not explicitly checked for (yet). + + +libcpufreq +---------- + +"libcpufreq" is a library which offers a unified access method for userspace +tools and programs to the cpufreq core and drivers in the Linux kernel. This +allows for code reduction in userspace tools, a clean implementation of +the interaction to the cpufreq core, and support for both the sysfs and proc +interfaces [depending on configuration, see below]. + + +compilation and installation +---------------------------- + +make +su +make install + +should suffice on most systems. It builds default libcpufreq, +cpufreq-set and cpufreq-info files and installs them in /usr/lib and +/usr/bin, respectively. If you want to set up the paths differently and/or +want to configure the package to your specific needs, you need to open +"Makefile" with an editor of your choice and edit the block marked +CONFIGURATION. + + +THANKS +------ +Many thanks to Mattia Dongili who wrote the autotoolization and +libtoolization, the manpages and the italian language file for cpufrequtils; +to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his +powernow-k8-decode and intel_gsic tools as well as the french language file; +and to various others commenting on the previous (pre-)releases of +cpufrequtils. + + + Dominik Brodowski diff --git a/tools/power/cpupower/ToDo b/tools/power/cpupower/ToDo new file mode 100644 index 0000000..874b78b --- /dev/null +++ b/tools/power/cpupower/ToDo @@ -0,0 +1,11 @@ +ToDos sorted by priority: + +- Use bitmask functions to parse CPU topology more robust + (current implementation has issues on AMD) +- Try to read out boost states and frequencies on Intel +- Adjust README +- Somewhere saw the ability to read power consumption of + RAM from HW on Intel SandyBridge -> another monitor? +- Add another c1e debug idle monitor + -> Is by design racy with BIOS, but could be added + with a --force option and some "be careful" messages diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile new file mode 100644 index 0000000..2b67606 --- /dev/null +++ b/tools/power/cpupower/bench/Makefile @@ -0,0 +1,29 @@ +LIBS = -L../ -lm -lcpupower + +OBJS = main.o parse.o system.o benchmark.o +CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\" + +%.o : %.c + $(ECHO) " CC " $@ + $(QUIET) $(CC) -c $(CFLAGS) $< -o $@ + +cpufreq-bench: $(OBJS) + $(ECHO) " CC " $@ + $(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS) + +all: cpufreq-bench + +install: + mkdir -p $(DESTDIR)/$(sbindir) + mkdir -p $(DESTDIR)/$(bindir) + mkdir -p $(DESTDIR)/$(docdir) + mkdir -p $(DESTDIR)/$(confdir) + install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench + install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh + install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH + install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh + install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf + +clean: + rm -f *.o + rm -f cpufreq-bench diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH new file mode 100644 index 0000000..8093ec7 --- /dev/null +++ b/tools/power/cpupower/bench/README-BENCH @@ -0,0 +1,124 @@ +This is cpufreq-bench, a microbenchmark for the cpufreq framework. + +Purpose +======= + +What is this benchmark for: + - Identify worst case performance loss when doing dynamic frequency + scaling using Linux kernel governors + - Identify average reaction time of a governor to CPU load changes + - (Stress) Testing whether a cpufreq low level driver or governor works + as expected + - Identify cpufreq related performance regressions between kernels + - Possibly Real time priority testing? -> what happens if there are + processes with a higher prio than the governor's kernel thread + - ... + +What this benchmark does *not* cover: + - Power saving related regressions (In fact as better the performance + throughput is, the worse the power savings will be, but the first should + mostly count more...) + - Real world (workloads) + + +Description +=========== + +cpufreq-bench helps to test the condition of a given cpufreq governor. +For that purpose, it compares the performance governor to a configured +powersave module. + + +How it works +============ +You can specify load (100% CPU load) and sleep (0% CPU load) times in us which +will be run X time in a row (cycles): + + sleep=25000 + load=25000 + cycles=20 + +This part of the configuration file will create 25ms load/sleep turns, +repeated 20 times. + +Adding this: + sleep_step=25000 + load_step=25000 + rounds=5 +Will increase load and sleep time by 25ms 5 times. +Together you get following test: +25ms load/sleep time repeated 20 times (cycles). +50ms load/sleep time repeated 20 times (cycles). +.. +100ms load/sleep time repeated 20 times (cycles). + +First it is calibrated how long a specific CPU intensive calculation +takes on this machine and needs to be run in a loop using the performance +governor. +Then the above test runs are processed using the performance governor +and the governor to test. The time the calculation really needed +with the dynamic freq scaling governor is compared with the time needed +on full performance and you get the overall performance loss. + + +Example of expected results with ondemand governor: + +This shows expected results of the first two test run rounds from +above config, you there have: + +100% CPU load (load) | 0 % CPU load (sleep) | round + 25 ms | 25 ms | 1 + 50 ms | 50 ms | 2 + +For example if ondemand governor is configured to have a 50ms +sampling rate you get: + +In round 1, ondemand should have rather static 50% load and probably +won't ever switch up (as long as up_threshold is above). + +In round 2, if the ondemand sampling times exactly match the load/sleep +trigger of the cpufreq-bench, you will see no performance loss (compare with +below possible ondemand sample kick ins (1)): + +But if ondemand always kicks in in the middle of the load sleep cycles, it +will always see 50% loads and you get worst performance impact never +switching up (compare with below possible ondemand sample kick ins (2)):: + + 50 50 50 50ms ->time +load -----| |-----| |-----| |-----| + | | | | | | | +sleep |-----| |-----| |-----| |---- + |-----|-----|-----|-----|-----|-----|-----|---- ondemand sampling (1) + 100 0 100 0 100 0 100 load seen by ondemand(%) + |-----|-----|-----|-----|-----|-----|-----|-- ondemand sampling (2) + 50 50 50 50 50 50 50 load seen by ondemand(%) + +You can easily test all kind of load/sleep times and check whether your +governor in average behaves as expected. + + +ToDo +==== + +Provide a gnuplot utility script for easy generation of plots to present +the outcome nicely. + + +cpufreq-bench Command Usage +=========================== +-l, --load=<long int> initial load time in us +-s, --sleep=<long int> initial sleep time in us +-x, --load-step=<long int> time to be added to load time, in us +-y, --sleep-step=<long int> time to be added to sleep time, in us +-c, --cpu=<unsigned int> CPU Number to use, starting at 0 +-p, --prio=<priority> scheduler priority, HIGH, LOW or DEFAULT +-g, --governor=<governor> cpufreq governor to test +-n, --cycles=<int> load/sleep cycles to get an avarage value to compare +-r, --rounds<int> load/sleep rounds +-f, --file=<configfile> config file to use +-o, --output=<dir> output dir, must exist +-v, --verbose verbose output on/off + +Due to the high priority, the application may not be responsible for some time. +After the benchmark, the logfile is saved in OUTPUTDIR/benchmark_TIMESTAMP.log + diff --git a/tools/power/cpupower/bench/benchmark.c b/tools/power/cpupower/bench/benchmark.c new file mode 100644 index 0000000..81b1c48 --- /dev/null +++ b/tools/power/cpupower/bench/benchmark.c @@ -0,0 +1,194 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <unistd.h> +#include <math.h> + +#include "config.h" +#include "system.h" +#include "benchmark.h" + +/* Print out progress if we log into a file */ +#define show_progress(total_time, progress_time) \ +if (config->output != stdout) { \ + fprintf(stdout, "Progress: %02lu %%\r", \ + (progress_time * 100) / total_time); \ + fflush(stdout); \ +} + +/** + * compute how many rounds of calculation we should do + * to get the given load time + * + * @param load aimed load time in µs + * + * @retval rounds of calculation + **/ + +unsigned int calculate_timespace(long load, struct config *config) +{ + int i; + long long now, then; + unsigned int estimated = GAUGECOUNT; + unsigned int rounds = 0; + unsigned int timed = 0; + + if (config->verbose) + printf("calibrating load of %lius, please wait...\n", load); + + /* get the initial calculation time for a specific number of rounds */ + now = get_time(); + ROUNDS(estimated); + then = get_time(); + + timed = (unsigned int)(then - now); + + /* approximation of the wanted load time by comparing with the + * initial calculation time */ + for (i = 0; i < 4; i++) { + rounds = (unsigned int)(load * estimated / timed); + dprintf("calibrating with %u rounds\n", rounds); + now = get_time(); + ROUNDS(rounds); + then = get_time(); + + timed = (unsigned int)(then - now); + estimated = rounds; + } + if (config->verbose) + printf("calibration done\n"); + + return estimated; +} + +/** + * benchmark + * generates a specific sleep an load time with the performance + * governor and compares the used time for same calculations done + * with the configured powersave governor + * + * @param config config values for the benchmark + * + **/ + +void start_benchmark(struct config *config) +{ + unsigned int _round, cycle; + long long now, then; + long sleep_time = 0, load_time = 0; + long performance_time = 0, powersave_time = 0; + unsigned int calculations; + unsigned long total_time = 0, progress_time = 0; + + sleep_time = config->sleep; + load_time = config->load; + + /* For the progress bar */ + for (_round = 1; _round <= config->rounds; _round++) + total_time += _round * (config->sleep + config->load); + total_time *= 2; /* powersave and performance cycles */ + + for (_round = 0; _round < config->rounds; _round++) { + performance_time = 0LL; + powersave_time = 0LL; + + show_progress(total_time, progress_time); + + /* set the cpufreq governor to "performance" which disables + * P-State switching. */ + if (set_cpufreq_governor("performance", config->cpu) != 0) + return; + + /* calibrate the calculation time. the resulting calculation + * _rounds should produce a load which matches the configured + * load time */ + calculations = calculate_timespace(load_time, config); + + if (config->verbose) + printf("_round %i: doing %u cycles with %u calculations" + " for %lius\n", _round + 1, config->cycles, + calculations, load_time); + + fprintf(config->output, "%u %li %li ", + _round, load_time, sleep_time); + + if (config->verbose) + printf("avarage: %lius, rps:%li\n", + load_time / calculations, + 1000000 * calculations / load_time); + + /* do some sleep/load cycles with the performance governor */ + for (cycle = 0; cycle < config->cycles; cycle++) { + now = get_time(); + usleep(sleep_time); + ROUNDS(calculations); + then = get_time(); + performance_time += then - now - sleep_time; + if (config->verbose) + printf("performance cycle took %lius, " + "sleep: %lius, " + "load: %lius, rounds: %u\n", + (long)(then - now), sleep_time, + load_time, calculations); + } + fprintf(config->output, "%li ", + performance_time / config->cycles); + + progress_time += sleep_time + load_time; + show_progress(total_time, progress_time); + + /* set the powersave governor which activates P-State switching + * again */ + if (set_cpufreq_governor(config->governor, config->cpu) != 0) + return; + + /* again, do some sleep/load cycles with the + * powersave governor */ + for (cycle = 0; cycle < config->cycles; cycle++) { + now = get_time(); + usleep(sleep_time); + ROUNDS(calculations); + then = get_time(); + powersave_time += then - now - sleep_time; + if (config->verbose) + printf("powersave cycle took %lius, " + "sleep: %lius, " + "load: %lius, rounds: %u\n", + (long)(then - now), sleep_time, + load_time, calculations); + } + + progress_time += sleep_time + load_time; + + /* compare the avarage sleep/load cycles */ + fprintf(config->output, "%li ", + powersave_time / config->cycles); + fprintf(config->output, "%.3f\n", + performance_time * 100.0 / powersave_time); + fflush(config->output); + + if (config->verbose) + printf("performance is at %.2f%%\n", + performance_time * 100.0 / powersave_time); + + sleep_time += config->sleep_step; + load_time += config->load_step; + } +} diff --git a/tools/power/cpupower/bench/benchmark.h b/tools/power/cpupower/bench/benchmark.h new file mode 100644 index 0000000..51d7f50 --- /dev/null +++ b/tools/power/cpupower/bench/benchmark.h @@ -0,0 +1,29 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* load loop, this schould take about 1 to 2ms to complete */ +#define ROUNDS(x) {unsigned int rcnt; \ + for (rcnt = 0; rcnt < x*1000; rcnt++) { \ + (void)(((int)(pow(rcnt, rcnt) * \ + sqrt(rcnt*7230970)) ^ 7230716) ^ \ + (int)atan2(rcnt, rcnt)); \ + } } \ + + +void start_benchmark(struct config *config); diff --git a/tools/power/cpupower/bench/config.h b/tools/power/cpupower/bench/config.h new file mode 100644 index 0000000..ee6f258 --- /dev/null +++ b/tools/power/cpupower/bench/config.h @@ -0,0 +1,36 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* initial loop count for the load calibration */ +#define GAUGECOUNT 1500 + +/* default scheduling policy SCHED_OTHER */ +#define SCHEDULER SCHED_OTHER + +#define PRIORITY_DEFAULT 0 +#define PRIORITY_HIGH sched_get_priority_max(SCHEDULER) +#define PRIORITY_LOW sched_get_priority_min(SCHEDULER) + +/* enable further debug messages */ +#ifdef DEBUG +#define dprintf printf +#else +#define dprintf(...) do { } while (0) +#endif + diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh new file mode 100644 index 0000000..410021a --- /dev/null +++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh @@ -0,0 +1,104 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc. + +# Helper script to easily create nice plots of your cpufreq-bench results + +dir=`mktemp -d` +output_file="cpufreq-bench.png" +global_title="cpufreq-bench plot" +picture_type="jpeg" +file[0]="" + +function usage() +{ + echo "cpufreq-bench_plot.sh [OPTIONS] logfile [measure_title] [logfile [measure_title]] ...]" + echo + echo "Options" + echo " -o output_file" + echo " -t global_title" + echo " -p picture_type [jpeg|gif|png|postscript|...]" + exit 1 +} + +if [ $# -eq 0 ];then + echo "No benchmark results file provided" + echo + usage +fi + +while getopts o:t:p: name ; do + case $name in + o) + output_file="$OPTARG".$picture_type + ;; + t) + global_title="$OPTARG" + ;; + p) + picture_type="$OPTARG" + ;; + ?) + usage + ;; + esac +done +shift $(($OPTIND -1)) + +plots=0 +while [ "$1" ];do + if [ ! -f "$1" ];then + echo "File $1 does not exist" + usage + fi + file[$plots]="$1" + title[$plots]="$2" + # echo "File: ${file[$plots]} - ${title[plots]}" + shift;shift + plots=$((plots + 1)) +done + +echo "set terminal $picture_type" >> $dir/plot_script.gpl +echo "set output \"$output_file\"" >> $dir/plot_script.gpl +echo "set title \"$global_title\"" >> $dir/plot_script.gpl +echo "set xlabel \"sleep/load time\"" >> $dir/plot_script.gpl +echo "set ylabel \"Performance (%)\"" >> $dir/plot_script.gpl + +for((plot=0;plot<$plots;plot++));do + + # Sanity check + ###### I am to dump to get this redirected to stderr/stdout in one awk call... ##### + cat ${file[$plot]} |grep -v "^#" |awk '{if ($2 != $3) printf("Error in measure %d:Load time %s does not equal sleep time %s, plot will not be correct\n", $1, $2, $3); ERR=1}' + ###### I am to dump to get this redirected in one awk call... ##### + + # Parse out load time (which must be equal to sleep time for a plot), divide it by 1000 + # to get ms and parse out the performance in percentage and write it to a temp file for plotting + cat ${file[$plot]} |grep -v "^#" |awk '{printf "%lu %.1f\n",$2/1000, $6}' >$dir/data_$plot + + if [ $plot -eq 0 ];then + echo -n "plot " >> $dir/plot_script.gpl + fi + echo -n "\"$dir/data_$plot\" title \"${title[$plot]}\" with lines" >> $dir/plot_script.gpl + if [ $(($plot + 1)) -ne $plots ];then + echo -n ", " >> $dir/plot_script.gpl + fi +done +echo >> $dir/plot_script.gpl + +gnuplot $dir/plot_script.gpl +rm -r $dir
\ No newline at end of file diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh new file mode 100644 index 0000000..de20d2a --- /dev/null +++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh @@ -0,0 +1,101 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc. + +# Ondemand up_threshold and sampling rate test script for cpufreq-bench +# mircobenchmark. +# Modify the general variables at the top or extend or copy out parts +# if you want to test other things +# + +# Default with latest kernels is 95, before micro account patches +# it was 80, cmp. with git commit 808009131046b62ac434dbc796 +UP_THRESHOLD="60 80 95" +# Depending on the kernel and the HW sampling rate could be restricted +# and cannot be set that low... +# E.g. before git commit cef9615a853ebc4972084f7 one could only set +# min sampling rate of 80000 if CONFIG_HZ=250 +SAMPLING_RATE="20000 80000" + +function measure() +{ + local -i up_threshold_set + local -i sampling_rate_set + + for up_threshold in $UP_THRESHOLD;do + for sampling_rate in $SAMPLING_RATE;do + # Set values in sysfs + echo $up_threshold >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold + echo $sampling_rate >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate + up_threshold_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold) + sampling_rate_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate) + + # Verify set values in sysfs + if [ ${up_threshold_set} -eq ${up_threshold} ];then + echo "up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}" + else + echo "WARNING: Tried to set up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}" + fi + if [ ${sampling_rate_set} -eq ${sampling_rate} ];then + echo "sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}" + else + echo "WARNING: Tried to set sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}" + fi + + # Benchmark + cpufreq-bench -o /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate} + done + done +} + +function create_plots() +{ + local command + + for up_threshold in $UP_THRESHOLD;do + command="cpufreq-bench_plot.sh -o \"sampling_rate_${SAMPLING_RATE}_up_threshold_${up_threshold}\" -t \"Ondemand sampling_rate: ${SAMPLING_RATE} comparison - Up_threshold: $up_threshold %\"" + for sampling_rate in $SAMPLING_RATE;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"sampling_rate = $sampling_rate\"" + done + echo $command + eval "$command" + echo + done + + for sampling_rate in $SAMPLING_RATE;do + command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${sampling_rate}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} % comparison - sampling_rate: $sampling_rate\"" + for up_threshold in $UP_THRESHOLD;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold\"" + done + echo $command + eval "$command" + echo + done + + command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${SAMPLING_RATE}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} and sampling_rate ${SAMPLING_RATE} comparison\"" + for sampling_rate in $SAMPLING_RATE;do + for up_threshold in $UP_THRESHOLD;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold - sampling_rate = $sampling_rate\"" + done + done + echo "$command" + eval "$command" +} + +measure +create_plots
\ No newline at end of file diff --git a/tools/power/cpupower/bench/example.cfg b/tools/power/cpupower/bench/example.cfg new file mode 100644 index 0000000..f91f643 --- /dev/null +++ b/tools/power/cpupower/bench/example.cfg @@ -0,0 +1,11 @@ +sleep = 50000 +load = 50000 +cpu = 0 +priority = LOW +output = /var/log/cpufreq-bench +sleep_step = 50000 +load_step = 50000 +cycles = 20 +rounds = 40 +verbose = 0 +governor = ondemand diff --git a/tools/power/cpupower/bench/main.c b/tools/power/cpupower/bench/main.c new file mode 100644 index 0000000..2491031 --- /dev/null +++ b/tools/power/cpupower/bench/main.c @@ -0,0 +1,202 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <getopt.h> +#include <errno.h> + +#include "config.h" +#include "system.h" +#include "benchmark.h" + +static struct option long_options[] = { + {"output", 1, 0, 'o'}, + {"sleep", 1, 0, 's'}, + {"load", 1, 0, 'l'}, + {"verbose", 0, 0, 'v'}, + {"cpu", 1, 0, 'c'}, + {"governor", 1, 0, 'g'}, + {"prio", 1, 0, 'p'}, + {"file", 1, 0, 'f'}, + {"cycles", 1, 0, 'n'}, + {"rounds", 1, 0, 'r'}, + {"load-step", 1, 0, 'x'}, + {"sleep-step", 1, 0, 'y'}, + {"help", 0, 0, 'h'}, + {0, 0, 0, 0} +}; + +/******************************************************************* + usage +*******************************************************************/ + +void usage() +{ + printf("usage: ./bench\n"); + printf("Options:\n"); + printf(" -l, --load=<long int>\t\tinitial load time in us\n"); + printf(" -s, --sleep=<long int>\t\tinitial sleep time in us\n"); + printf(" -x, --load-step=<long int>\ttime to be added to load time, in us\n"); + printf(" -y, --sleep-step=<long int>\ttime to be added to sleep time, in us\n"); + printf(" -c, --cpu=<cpu #>\t\t\tCPU Nr. to use, starting at 0\n"); + printf(" -p, --prio=<priority>\t\t\tscheduler priority, HIGH, LOW or DEFAULT\n"); + printf(" -g, --governor=<governor>\t\tcpufreq governor to test\n"); + printf(" -n, --cycles=<int>\t\t\tload/sleep cycles\n"); + printf(" -r, --rounds<int>\t\t\tload/sleep rounds\n"); + printf(" -f, --file=<configfile>\t\tconfig file to use\n"); + printf(" -o, --output=<dir>\t\t\toutput path. Filename will be OUTPUTPATH/benchmark_TIMESTAMP.log\n"); + printf(" -v, --verbose\t\t\t\tverbose output on/off\n"); + printf(" -h, --help\t\t\t\tPrint this help screen\n"); + exit(1); +} + +/******************************************************************* + main +*******************************************************************/ + +int main(int argc, char **argv) +{ + int c; + int option_index = 0; + struct config *config = NULL; + + config = prepare_default_config(); + + if (config == NULL) + return EXIT_FAILURE; + + while (1) { + c = getopt_long (argc, argv, "hg:o:s:l:vc:p:f:n:r:x:y:", + long_options, &option_index); + if (c == -1) + break; + + switch (c) { + case 'o': + if (config->output != NULL) + fclose(config->output); + + config->output = prepare_output(optarg); + + if (config->output == NULL) + return EXIT_FAILURE; + + dprintf("user output path -> %s\n", optarg); + break; + case 's': + sscanf(optarg, "%li", &config->sleep); + dprintf("user sleep time -> %s\n", optarg); + break; + case 'l': + sscanf(optarg, "%li", &config->load); + dprintf("user load time -> %s\n", optarg); + break; + case 'c': + sscanf(optarg, "%u", &config->cpu); + dprintf("user cpu -> %s\n", optarg); + break; + case 'g': + strncpy(config->governor, optarg, 14); + dprintf("user governor -> %s\n", optarg); + break; + case 'p': + if (string_to_prio(optarg) != SCHED_ERR) { + config->prio = string_to_prio(optarg); + dprintf("user prio -> %s\n", optarg); + } else { + if (config != NULL) { + if (config->output != NULL) + fclose(config->output); + free(config); + } + usage(); + } + break; + case 'n': + sscanf(optarg, "%u", &config->cycles); + dprintf("user cycles -> %s\n", optarg); + break; + case 'r': + sscanf(optarg, "%u", &config->rounds); + dprintf("user rounds -> %s\n", optarg); + break; + case 'x': + sscanf(optarg, "%li", &config->load_step); + dprintf("user load_step -> %s\n", optarg); + break; + case 'y': + sscanf(optarg, "%li", &config->sleep_step); + dprintf("user sleep_step -> %s\n", optarg); + break; + case 'f': + if (prepare_config(optarg, config)) + return EXIT_FAILURE; + break; + case 'v': + config->verbose = 1; + dprintf("verbose output enabled\n"); + break; + case 'h': + case '?': + default: + if (config != NULL) { + if (config->output != NULL) + fclose(config->output); + free(config); + } + usage(); + } + } + + if (config->verbose) { + printf("starting benchmark with parameters:\n"); + printf("config:\n\t" + "sleep=%li\n\t" + "load=%li\n\t" + "sleep_step=%li\n\t" + "load_step=%li\n\t" + "cpu=%u\n\t" + "cycles=%u\n\t" + "rounds=%u\n\t" + "governor=%s\n\n", + config->sleep, + config->load, + config->sleep_step, + config->load_step, + config->cpu, + config->cycles, + config->rounds, + config->governor); + } + + prepare_user(config); + prepare_system(config); + start_benchmark(config); + + if (config->output != stdout) + fclose(config->output); + + free(config); + + return EXIT_SUCCESS; +} + diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c new file mode 100644 index 0000000..543bba1 --- /dev/null +++ b/tools/power/cpupower/bench/parse.c @@ -0,0 +1,225 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <time.h> +#include <dirent.h> + +#include <sys/utsname.h> +#include <sys/types.h> +#include <sys/stat.h> + +#include "parse.h" +#include "config.h" + +/** + * converts priority string to priority + * + * @param str string that represents a scheduler priority + * + * @retval priority + * @retval SCHED_ERR when the priority doesn't exit + **/ + +enum sched_prio string_to_prio(const char *str) +{ + if (strncasecmp("high", str, strlen(str)) == 0) + return SCHED_HIGH; + else if (strncasecmp("default", str, strlen(str)) == 0) + return SCHED_DEFAULT; + else if (strncasecmp("low", str, strlen(str)) == 0) + return SCHED_LOW; + else + return SCHED_ERR; +} + +/** + * create and open logfile + * + * @param dir directory in which the logfile should be created + * + * @retval logfile on success + * @retval NULL when the file can't be created + **/ + +FILE *prepare_output(const char *dirname) +{ + FILE *output = NULL; + int len; + char *filename; + struct utsname sysdata; + DIR *dir; + + dir = opendir(dirname); + if (dir == NULL) { + if (mkdir(dirname, 0755)) { + perror("mkdir"); + fprintf(stderr, "error: Cannot create dir %s\n", + dirname); + return NULL; + } + } + + len = strlen(dirname) + 30; + filename = malloc(sizeof(char) * len); + + if (uname(&sysdata) == 0) { + len += strlen(sysdata.nodename) + strlen(sysdata.release); + filename = realloc(filename, sizeof(char) * len); + + if (filename == NULL) { + perror("realloc"); + return NULL; + } + + snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log", + dirname, sysdata.nodename, sysdata.release, time(NULL)); + } else { + snprintf(filename, len - 1, "%s/benchmark_%li.log", + dirname, time(NULL)); + } + + dprintf("logilename: %s\n", filename); + + output = fopen(filename, "w+"); + if (output == NULL) { + perror("fopen"); + fprintf(stderr, "error: unable to open logfile\n"); + } + + fprintf(stdout, "Logfile: %s\n", filename); + + free(filename); + fprintf(output, "#round load sleep performance powersave percentage\n"); + return output; +} + +/** + * returns the default config + * + * @retval default config on success + * @retval NULL when the output file can't be created + **/ + +struct config *prepare_default_config() +{ + struct config *config = malloc(sizeof(struct config)); + + dprintf("loading defaults\n"); + + config->sleep = 500000; + config->load = 500000; + config->sleep_step = 500000; + config->load_step = 500000; + config->cycles = 5; + config->rounds = 50; + config->cpu = 0; + config->prio = SCHED_HIGH; + config->verbose = 0; + strncpy(config->governor, "ondemand", 8); + + config->output = stdout; + +#ifdef DEFAULT_CONFIG_FILE + if (prepare_config(DEFAULT_CONFIG_FILE, config)) + return NULL; +#endif + return config; +} + +/** + * parses config file and returns the config to the caller + * + * @param path config file name + * + * @retval 1 on error + * @retval 0 on success + **/ + +int prepare_config(const char *path, struct config *config) +{ + size_t len = 0; + char *opt, *val, *line = NULL; + FILE *configfile = fopen(path, "r"); + + if (config == NULL) { + fprintf(stderr, "error: config is NULL\n"); + return 1; + } + + if (configfile == NULL) { + perror("fopen"); + fprintf(stderr, "error: unable to read configfile\n"); + free(config); + return 1; + } + + while (getline(&line, &len, configfile) != -1) { + if (line[0] == '#' || line[0] == ' ') + continue; + + sscanf(line, "%as = %as", &opt, &val); + + dprintf("parsing: %s -> %s\n", opt, val); + + if (strncmp("sleep", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->sleep); + + else if (strncmp("load", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->load); + + else if (strncmp("load_step", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->load_step); + + else if (strncmp("sleep_step", opt, strlen(opt)) == 0) + sscanf(val, "%li", &config->sleep_step); + + else if (strncmp("cycles", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->cycles); + + else if (strncmp("rounds", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->rounds); + + else if (strncmp("verbose", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->verbose); + + else if (strncmp("output", opt, strlen(opt)) == 0) + config->output = prepare_output(val); + + else if (strncmp("cpu", opt, strlen(opt)) == 0) + sscanf(val, "%u", &config->cpu); + + else if (strncmp("governor", opt, 14) == 0) + strncpy(config->governor, val, 14); + + else if (strncmp("priority", opt, strlen(opt)) == 0) { + if (string_to_prio(val) != SCHED_ERR) + config->prio = string_to_prio(val); + } + } + + free(line); + free(opt); + free(val); + + return 0; +} diff --git a/tools/power/cpupower/bench/parse.h b/tools/power/cpupower/bench/parse.h new file mode 100644 index 0000000..a8dc632 --- /dev/null +++ b/tools/power/cpupower/bench/parse.h @@ -0,0 +1,53 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* struct that holds the required config parameters */ +struct config +{ + long sleep; /* sleep time in µs */ + long load; /* load time in µs */ + long sleep_step; /* time value which changes the + * sleep time after every round in µs */ + long load_step; /* time value which changes the + * load time after every round in µs */ + unsigned int cycles; /* calculation cycles with the same sleep/load time */ + unsigned int rounds; /* calculation rounds with iterated sleep/load time */ + unsigned int cpu; /* cpu for which the affinity is set */ + char governor[15]; /* cpufreq governor */ + enum sched_prio /* possible scheduler priorities */ + { + SCHED_ERR = -1, + SCHED_HIGH, + SCHED_DEFAULT, + SCHED_LOW + } prio; + + unsigned int verbose; /* verbose output */ + FILE *output; /* logfile */ + char *output_filename; /* logfile name, must be freed at the end + if output != NULL and output != stdout*/ +}; + +enum sched_prio string_to_prio(const char *str); + +FILE *prepare_output(const char *dir); + +int prepare_config(const char *path, struct config *config); +struct config *prepare_default_config(); + diff --git a/tools/power/cpupower/bench/system.c b/tools/power/cpupower/bench/system.c new file mode 100644 index 0000000..f01e3f4 --- /dev/null +++ b/tools/power/cpupower/bench/system.c @@ -0,0 +1,191 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <stdio.h> +#include <time.h> +#include <sys/time.h> +#include <sys/types.h> +#include <unistd.h> + +#include <sched.h> + +#include <cpufreq.h> + +#include "config.h" +#include "system.h" + +/** + * returns time since epoch in µs + * + * @retval time + **/ + +long long int get_time() +{ + struct timeval now; + + gettimeofday(&now, NULL); + + return (long long int)(now.tv_sec * 1000000LL + now.tv_usec); +} + +/** + * sets the cpufreq governor + * + * @param governor cpufreq governor name + * @param cpu cpu for which the governor should be set + * + * @retval 0 on success + * @retval -1 when failed + **/ + +int set_cpufreq_governor(char *governor, unsigned int cpu) +{ + + dprintf("set %s as cpufreq governor\n", governor); + + if (cpufreq_cpu_exists(cpu) != 0) { + perror("cpufreq_cpu_exists"); + fprintf(stderr, "error: cpu %u does not exist\n", cpu); + return -1; + } + + if (cpufreq_modify_policy_governor(cpu, governor) != 0) { + perror("cpufreq_modify_policy_governor"); + fprintf(stderr, "error: unable to set %s governor\n", governor); + return -1; + } + + return 0; +} + +/** + * sets cpu affinity for the process + * + * @param cpu cpu# to which the affinity should be set + * + * @retval 0 on success + * @retval -1 when setting the affinity failed + **/ + +int set_cpu_affinity(unsigned int cpu) +{ + cpu_set_t cpuset; + + CPU_ZERO(&cpuset); + CPU_SET(cpu, &cpuset); + + dprintf("set affinity to cpu #%u\n", cpu); + + if (sched_setaffinity(getpid(), sizeof(cpu_set_t), &cpuset) < 0) { + perror("sched_setaffinity"); + fprintf(stderr, "warning: unable to set cpu affinity\n"); + return -1; + } + + return 0; +} + +/** + * sets the process priority parameter + * + * @param priority priority value + * + * @retval 0 on success + * @retval -1 when setting the priority failed + **/ + +int set_process_priority(int priority) +{ + struct sched_param param; + + dprintf("set scheduler priority to %i\n", priority); + + param.sched_priority = priority; + + if (sched_setscheduler(0, SCHEDULER, ¶m) < 0) { + perror("sched_setscheduler"); + fprintf(stderr, "warning: unable to set scheduler priority\n"); + return -1; + } + + return 0; +} + +/** + * notifies the user that the benchmark may run some time + * + * @param config benchmark config values + * + **/ + +void prepare_user(const struct config *config) +{ + unsigned long sleep_time = 0; + unsigned long load_time = 0; + unsigned int round; + + for (round = 0; round < config->rounds; round++) { + sleep_time += 2 * config->cycles * + (config->sleep + config->sleep_step * round); + load_time += 2 * config->cycles * + (config->load + config->load_step * round) + + (config->load + config->load_step * round * 4); + } + + if (config->verbose || config->output != stdout) + printf("approx. test duration: %im\n", + (int)((sleep_time + load_time) / 60000000)); +} + +/** + * sets up the cpu affinity and scheduler priority + * + * @param config benchmark config values + * + **/ + +void prepare_system(const struct config *config) +{ + if (config->verbose) + printf("set cpu affinity to cpu #%u\n", config->cpu); + + set_cpu_affinity(config->cpu); + + switch (config->prio) { + case SCHED_HIGH: + if (config->verbose) + printf("high priority condition requested\n"); + + set_process_priority(PRIORITY_HIGH); + break; + case SCHED_LOW: + if (config->verbose) + printf("low priority condition requested\n"); + + set_process_priority(PRIORITY_LOW); + break; + default: + if (config->verbose) + printf("default priority condition requested\n"); + + set_process_priority(PRIORITY_DEFAULT); + } +} + diff --git a/tools/power/cpupower/bench/system.h b/tools/power/cpupower/bench/system.h new file mode 100644 index 0000000..3a8c858 --- /dev/null +++ b/tools/power/cpupower/bench/system.h @@ -0,0 +1,29 @@ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "parse.h" + +long long get_time(); + +int set_cpufreq_governor(char *governor, unsigned int cpu); +int set_cpu_affinity(unsigned int cpu); +int set_process_priority(int priority); + +void prepare_user(const struct config *config); +void prepare_system(const struct config *config); diff --git a/tools/power/cpupower/debug/i386/Makefile b/tools/power/cpupower/debug/i386/Makefile new file mode 100644 index 0000000..d08cc1e --- /dev/null +++ b/tools/power/cpupower/debug/i386/Makefile @@ -0,0 +1,20 @@ +default: all + +centrino-decode: centrino-decode.c + $(CC) $(CFLAGS) -o centrino-decode centrino-decode.c + +dump_psb: dump_psb.c + $(CC) $(CFLAGS) -o dump_psb dump_psb.c + +intel_gsic: intel_gsic.c + $(CC) $(CFLAGS) -o intel_gsic -llrmi intel_gsic.c + +powernow-k8-decode: powernow-k8-decode.c + $(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c + +all: centrino-decode dump_psb intel_gsic powernow-k8-decode + +clean: + rm -rf centrino-decode dump_psb intel_gsic powernow-k8-decode + +.PHONY: all default clean diff --git a/tools/power/cpupower/debug/i386/centrino-decode.c b/tools/power/cpupower/debug/i386/centrino-decode.c new file mode 100644 index 0000000..7ef24cc --- /dev/null +++ b/tools/power/cpupower/debug/i386/centrino-decode.c @@ -0,0 +1,113 @@ +/* + * (C) 2003 - 2004 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Based on code found in + * linux/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c + * and originally developed by Jeremy Fitzhardinge. + * + * USAGE: simply run it to decode the current settings on CPU 0, + * or pass the CPU number as argument, or pass the MSR content + * as argument. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <sys/types.h> +#include <sys/stat.h> + +#define MCPU 32 + +#define MSR_IA32_PERF_STATUS 0x198 + +static int rdmsr(unsigned int cpu, unsigned int msr, + unsigned int *lo, unsigned int *hi) +{ + int fd; + char file[20]; + unsigned long long val; + int retval = -1; + + *lo = *hi = 0; + + if (cpu > MCPU) + goto err1; + + sprintf(file, "/dev/cpu/%d/msr", cpu); + fd = open(file, O_RDONLY); + + if (fd < 0) + goto err1; + + if (lseek(fd, msr, SEEK_CUR) == -1) + goto err2; + + if (read(fd, &val, 8) != 8) + goto err2; + + *lo = (uint32_t )(val & 0xffffffffull); + *hi = (uint32_t )(val>>32 & 0xffffffffull); + + retval = 0; +err2: + close(fd); +err1: + return retval; +} + +static void decode (unsigned int msr) +{ + unsigned int multiplier; + unsigned int mv; + + multiplier = ((msr >> 8) & 0xFF); + + mv = (((msr & 0xFF) * 16) + 700); + + printf("0x%x means multiplier %d @ %d mV\n", msr, multiplier, mv); +} + +static int decode_live(unsigned int cpu) +{ + unsigned int lo, hi; + int err; + + err = rdmsr(cpu, MSR_IA32_PERF_STATUS, &lo, &hi); + + if (err) { + printf("can't get MSR_IA32_PERF_STATUS for cpu %d\n", cpu); + printf("Possible trouble: you don't run an Enhanced SpeedStep capable cpu\n"); + printf("or you are not root, or the msr driver is not present\n"); + return 1; + } + + decode(lo); + + return 0; +} + +int main (int argc, char **argv) +{ + unsigned int cpu, mode = 0; + + if (argc < 2) + cpu = 0; + else { + cpu = strtoul(argv[1], NULL, 0); + if (cpu >= MCPU) + mode = 1; + } + + if (mode) + decode(cpu); + else + decode_live(cpu); + + return 0; +} diff --git a/tools/power/cpupower/debug/i386/dump_psb.c b/tools/power/cpupower/debug/i386/dump_psb.c new file mode 100644 index 0000000..8d6a475 --- /dev/null +++ b/tools/power/cpupower/debug/i386/dump_psb.c @@ -0,0 +1,196 @@ +/* + * dump_psb. (c) 2004, Dave Jones, Red Hat Inc. + * Licensed under the GPL v2. + */ + +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#define _GNU_SOURCE +#include <getopt.h> + +#include <sys/mman.h> + +#define LEN (0x100000 - 0xc0000) +#define OFFSET (0xc0000) + +#ifndef __packed +#define __packed __attribute((packed)) +#endif + +static long relevant; + +static const int fid_to_mult[32] = { + 110, 115, 120, 125, 50, 55, 60, 65, + 70, 75, 80, 85, 90, 95, 100, 105, + 30, 190, 40, 200, 130, 135, 140, 210, + 150, 225, 160, 165, 170, 180, -1, -1, +}; + +static const int vid_to_voltage[32] = { + 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, + 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, + 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, + 1075, 1050, 1024, 1000, 975, 950, 925, 0, +}; + +struct psb_header { + char signature[10]; + u_char version; + u_char flags; + u_short settlingtime; + u_char res1; + u_char numpst; +} __packed; + +struct pst_header { + u_int32_t cpuid; + u_char fsb; + u_char maxfid; + u_char startvid; + u_char numpstates; +} __packed; + +static u_int fsb; +static u_int sgtc; + +static int +decode_pst(char *p, int npstates) +{ + int i; + int freq, fid, vid; + + for (i = 0; i < npstates; ++i) { + fid = *p++; + vid = *p++; + freq = 100 * fid_to_mult[fid] * fsb; + + printf(" %2d %8dkHz FID %02x (%2d.%01d) VID %02x (%4dmV)\n", + i, + freq, + fid, fid_to_mult[fid]/10, fid_to_mult[fid]%10, + vid, vid_to_voltage[vid]); + } + + return 0; +} + +static +void decode_psb(char *p, int numpst) +{ + int i; + struct psb_header *psb; + struct pst_header *pst; + + psb = (struct psb_header*) p; + + if (psb->version != 0x12) + return; + + printf("PSB version: %hhx flags: %hhx settling time %hhuus res1 %hhx num pst %hhu\n", + psb->version, + psb->flags, + psb->settlingtime, + psb->res1, + psb->numpst); + sgtc = psb->settlingtime * 100; + + if (sgtc < 10000) + sgtc = 10000; + + p = ((char *) psb) + sizeof(struct psb_header); + + if (numpst < 0) + numpst = psb->numpst; + else + printf("Overriding number of pst :%d\n", numpst); + + for (i = 0; i < numpst; i++) { + pst = (struct pst_header*) p; + + if (relevant != 0) { + if (relevant!= pst->cpuid) + goto next_one; + } + + printf(" PST %d cpuid %.3x fsb %hhu mfid %hhx svid %hhx numberstates %hhu\n", + i+1, + pst->cpuid, + pst->fsb, + pst->maxfid, + pst->startvid, + pst->numpstates); + + fsb = pst->fsb; + decode_pst(p + sizeof(struct pst_header), pst->numpstates); + +next_one: + p += sizeof(struct pst_header) + 2*pst->numpstates; + } + +} + +static struct option info_opts[] = { + {.name = "numpst", .has_arg=no_argument, .flag=NULL, .val='n'}, +}; + +void print_help(void) +{ + printf ("Usage: dump_psb [options]\n"); + printf ("Options:\n"); + printf (" -n, --numpst Set number of PST tables to scan\n"); + printf (" -r, --relevant Only display PSTs relevant to cpuid N\n"); +} + +int +main(int argc, char *argv[]) +{ + int fd; + int numpst=-1; + int ret=0, cont=1; + char *mem = NULL; + char *p; + + do { + ret = getopt_long(argc, argv, "hr:n:", info_opts, NULL); + switch (ret){ + case '?': + case 'h': + print_help(); + cont = 0; + break; + case 'r': + relevant = strtol(optarg, NULL, 16); + break; + case 'n': + numpst = strtol(optarg, NULL, 10); + break; + case -1: + cont = 0; + break; + } + + } while(cont); + + fd = open("/dev/mem", O_RDONLY); + if (fd < 0) { + printf ("Couldn't open /dev/mem. Are you root?\n"); + exit(1); + } + + mem = mmap(mem, 0x100000 - 0xc0000, PROT_READ, MAP_SHARED, fd, 0xc0000); + close(fd); + + for (p = mem; p - mem < LEN; p+=16) { + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + decode_psb(p, numpst); + break; + } + } + + munmap(mem, LEN); + return 0; +} diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c new file mode 100644 index 0000000..53f5293 --- /dev/null +++ b/tools/power/cpupower/debug/i386/intel_gsic.c @@ -0,0 +1,78 @@ +/* + * (C) 2003 Bruno Ducrot + * (C) 2004 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Based on code found in + * linux/include/asm-i386/ist.h and linux/arch/i386/kernel/setup.c + * and originally developed by Andy Grover <andrew.grover@intel.com> + */ + +#include <stdio.h> +#include <string.h> +#include <lrmi.h> + +int main (void) +{ + struct LRMI_regs r; + int retval; + + if (!LRMI_init()) + return 0; + + memset(&r, 0, sizeof(r)); + + r.eax = 0x0000E980; + r.edx = 0x47534943; + + retval = LRMI_int(0x15, &r); + + if (!retval) { + printf("Failed!\n"); + return 0; + } + if (r.eax == 0x47534943) { + printf("BIOS supports GSIC call:\n"); + printf("\tsignature: %c%c%c%c\n", + (r.eax >> 24) & 0xff, + (r.eax >> 16) & 0xff, + (r.eax >> 8) & 0xff, + (r.eax) & 0xff); + printf("\tcommand port = 0x%.4x\n", + r.ebx & 0xffff); + printf("\tcommand = 0x%.4x\n", + (r.ebx >> 16) & 0xffff); + printf("\tevent port = 0x%.8x\n", r.ecx); + printf("\tflags = 0x%.8x\n", r.edx); + if (((r.ebx >> 16) & 0xffff) != 0x82) { + printf("non-default command value. If speedstep-smi " + "doesn't work out of the box,\nyou may want to " + "try out the default value by passing " + "smi_cmd=0x82 to the module\n ON YOUR OWN " + "RISK.\n"); + } + if ((r.ebx & 0xffff) != 0xb2) { + printf("non-default command port. If speedstep-smi " + "doesn't work out of the box,\nyou may want to " + "try out the default value by passing " + "smi_port=0x82 to the module\n ON YOUR OWN " + "RISK.\n"); + } + } else { + printf("BIOS DOES NOT support GSIC call. Dumping registers anyway:\n"); + printf("eax = 0x%.8x\n", r.eax); + printf("ebx = 0x%.8x\n", r.ebx); + printf("ecx = 0x%.8x\n", r.ecx); + printf("edx = 0x%.8x\n", r.edx); + printf("Note also that some BIOS do not support the initial " + "GSIC call, but the newer\nspeeedstep-smi driver may " + "work.\nFor this, you need to pass some arguments to " + "the speedstep-smi driver:\n"); + printf("\tsmi_cmd=0x?? smi_port=0x?? smi_sig=1\n"); + printf("\nUnfortunately, you have to know what exactly are " + "smi_cmd and smi_port, and this\nis system " + "dependant.\n"); + } + return 1; +} diff --git a/tools/power/cpupower/debug/i386/powernow-k8-decode.c b/tools/power/cpupower/debug/i386/powernow-k8-decode.c new file mode 100644 index 0000000..638a6b3 --- /dev/null +++ b/tools/power/cpupower/debug/i386/powernow-k8-decode.c @@ -0,0 +1,96 @@ +/* + * (C) 2004 Bruno Ducrot <ducrot@poupinou.org> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Based on code found in + * linux/arch/i386/kernel/cpu/cpufreq/powernow-k8.c + * and originally developed by Paul Devriendt + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <sys/types.h> +#include <sys/stat.h> + +#define MCPU 32 + +#define MSR_FIDVID_STATUS 0xc0010042 + +#define MSR_S_HI_CURRENT_VID 0x0000001f +#define MSR_S_LO_CURRENT_FID 0x0000003f + +static int get_fidvid(uint32_t cpu, uint32_t *fid, uint32_t *vid) +{ + int err = 1; + uint64_t msr = 0; + int fd; + char file[20]; + + if (cpu > MCPU) + goto out; + + sprintf(file, "/dev/cpu/%d/msr", cpu); + + fd = open(file, O_RDONLY); + if (fd < 0) + goto out; + lseek(fd, MSR_FIDVID_STATUS, SEEK_CUR); + if (read(fd, &msr, 8) != 8) + goto err1; + + *fid = ((uint32_t )(msr & 0xffffffffull)) & MSR_S_LO_CURRENT_FID; + *vid = ((uint32_t )(msr>>32 & 0xffffffffull)) & MSR_S_HI_CURRENT_VID; + err = 0; +err1: + close(fd); +out: + return err; +} + + +/* Return a frequency in MHz, given an input fid */ +static uint32_t find_freq_from_fid(uint32_t fid) +{ + return 800 + (fid * 100); +} + +/* Return a voltage in miliVolts, given an input vid */ +static uint32_t find_millivolts_from_vid(uint32_t vid) +{ + return 1550-vid*25; +} + +int main (int argc, char *argv[]) +{ + int err; + int cpu; + uint32_t fid, vid; + + if (argc < 2) + cpu = 0; + else + cpu = strtoul(argv[1], NULL, 0); + + err = get_fidvid(cpu, &fid, &vid); + + if (err) { + printf("can't get fid, vid from MSR\n"); + printf("Possible trouble: you don't run a powernow-k8 capable cpu\n"); + printf("or you are not root, or the msr driver is not present\n"); + exit(1); + } + + + printf("cpu %d currently at %d MHz and %d mV\n", + cpu, + find_freq_from_fid(fid), + find_millivolts_from_vid(vid)); + + return 0; +} diff --git a/tools/power/cpupower/debug/kernel/Makefile b/tools/power/cpupower/debug/kernel/Makefile new file mode 100644 index 0000000..96b146f --- /dev/null +++ b/tools/power/cpupower/debug/kernel/Makefile @@ -0,0 +1,23 @@ +obj-m := + +KDIR := /lib/modules/$(shell uname -r)/build +PWD := $(shell pwd) +KMISC := /lib/modules/$(shell uname -r)/cpufrequtils/ + +ifeq ("$(CONFIG_X86_TSC)", "y") + obj-m += cpufreq-test_tsc.o +endif + +default: + $(MAKE) -C $(KDIR) M=$(PWD) + +clean: + - rm -rf *.o *.ko .tmp-versions .*.cmd .*.mod.* *.mod.c + - rm -rf .tmp_versions* Module.symvers modules.order + +install: default + install -d $(KMISC) + install -m 644 -c *.ko $(KMISC) + /sbin/depmod -a + +all: default diff --git a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c new file mode 100644 index 0000000..66cace6 --- /dev/null +++ b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c @@ -0,0 +1,113 @@ +/* + * test module to check whether the TSC-based delay routine continues + * to work properly after cpufreq transitions. Needs ACPI to work + * properly. + * + * Based partly on the Power Management Timer (PMTMR) code to be found + * in arch/i386/kernel/timers/timer_pm.c on recent 2.6. kernels, especially + * code written by John Stultz. The read_pmtmr function was copied verbatim + * from that file. + * + * (C) 2004 Dominik Brodowski + * + * To use: + * 1.) pass clock=tsc to the kernel on your bootloader + * 2.) modprobe this module (it'll fail) + * 3.) change CPU frequency + * 4.) modprobe this module again + * 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the + * TSC-based delay routine on the Linux kernel does not correctly + * handle the cpufreq transition. Please report this to + * cpufreq@vger.kernel.org + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/io.h> + +#include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> + +static int pm_tmr_ioport = 0; + +/*helper function to safely read acpi pm timesource*/ +static u32 read_pmtmr(void) +{ + u32 v1=0,v2=0,v3=0; + /* It has been reported that because of various broken + * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time + * source is not latched, so you must read it multiple + * times to insure a safe value is read. + */ + do { + v1 = inl(pm_tmr_ioport); + v2 = inl(pm_tmr_ioport); + v3 = inl(pm_tmr_ioport); + } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) + || (v3 > v1 && v3 < v2)); + + /* mask the output to 24 bits */ + return (v2 & 0xFFFFFF); +} + +static int __init cpufreq_test_tsc(void) +{ + u32 now, then, diff; + u64 now_tsc, then_tsc, diff_tsc; + int i; + + /* the following code snipped is copied from arch/x86/kernel/acpi/boot.c + of Linux v2.6.25. */ + + /* detect the location of the ACPI PM Timer */ + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) { + /* FADT rev. 2 */ + if (acpi_gbl_FADT.xpm_timer_block.space_id != + ACPI_ADR_SPACE_SYSTEM_IO) + return 0; + + pm_tmr_ioport = acpi_gbl_FADT.xpm_timer_block.address; + /* + * "X" fields are optional extensions to the original V1.0 + * fields, so we must selectively expand V1.0 fields if the + * corresponding X field is zero. + */ + if (!pm_tmr_ioport) + pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block; + } else { + /* FADT rev. 1 */ + pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block; + } + + printk(KERN_DEBUG "start--> \n"); + then = read_pmtmr(); + rdtscll(then_tsc); + for (i=0;i<20;i++) { + mdelay(100); + now = read_pmtmr(); + rdtscll(now_tsc); + diff = (now - then) & 0xFFFFFF; + diff_tsc = now_tsc - then_tsc; + printk(KERN_DEBUG "t1: %08u t2: %08u diff_pmtmr: %08u diff_tsc: %016llu\n", then, now, diff, diff_tsc); + then = now; + then_tsc = now_tsc; + } + printk(KERN_DEBUG "<-- end \n"); + return -ENODEV; +} + +static void __exit cpufreq_none(void) +{ + return; +} + +module_init(cpufreq_test_tsc) +module_exit(cpufreq_none) + + +MODULE_AUTHOR("Dominik Brodowski"); +MODULE_DESCRIPTION("Verify the TSC cpufreq notifier working correctly -- needs ACPI-enabled system"); +MODULE_LICENSE ("GPL"); diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile new file mode 100644 index 0000000..dbf1399 --- /dev/null +++ b/tools/power/cpupower/debug/x86_64/Makefile @@ -0,0 +1,14 @@ +default: all + +centrino-decode: centrino-decode.c + $(CC) $(CFLAGS) -o centrino-decode centrino-decode.c + +powernow-k8-decode: powernow-k8-decode.c + $(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c + +all: centrino-decode powernow-k8-decode + +clean: + rm -rf centrino-decode powernow-k8-decode + +.PHONY: all default clean diff --git a/tools/power/cpupower/debug/x86_64/centrino-decode.c b/tools/power/cpupower/debug/x86_64/centrino-decode.c new file mode 120000 index 0000000..26fb3f1 --- /dev/null +++ b/tools/power/cpupower/debug/x86_64/centrino-decode.c @@ -0,0 +1 @@ +../i386/centrino-decode.c
\ No newline at end of file diff --git a/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c b/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c new file mode 120000 index 0000000..eb30c79 --- /dev/null +++ b/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c @@ -0,0 +1 @@ +../i386/powernow-k8-decode.c
\ No newline at end of file diff --git a/tools/power/cpupower/lib/cpufreq.c b/tools/power/cpupower/lib/cpufreq.c new file mode 100644 index 0000000..d961101 --- /dev/null +++ b/tools/power/cpupower/lib/cpufreq.c @@ -0,0 +1,208 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + */ + + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> + +#include "cpufreq.h" +#include "sysfs.h" + +int cpufreq_cpu_exists(unsigned int cpu) +{ + return sysfs_cpu_exists(cpu); +} + +unsigned long cpufreq_get_freq_kernel(unsigned int cpu) +{ + return sysfs_get_freq_kernel(cpu); +} + +unsigned long cpufreq_get_freq_hardware(unsigned int cpu) +{ + return sysfs_get_freq_hardware(cpu); +} + +unsigned long cpufreq_get_transition_latency(unsigned int cpu) +{ + return sysfs_get_freq_transition_latency(cpu); +} + +int cpufreq_get_hardware_limits(unsigned int cpu, + unsigned long *min, + unsigned long *max) +{ + if ((!min) || (!max)) + return -EINVAL; + return sysfs_get_freq_hardware_limits(cpu, min, max); +} + +char *cpufreq_get_driver(unsigned int cpu) +{ + return sysfs_get_freq_driver(cpu); +} + +void cpufreq_put_driver(char *ptr) +{ + if (!ptr) + return; + free(ptr); +} + +struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu) +{ + return sysfs_get_freq_policy(cpu); +} + +void cpufreq_put_policy(struct cpufreq_policy *policy) +{ + if ((!policy) || (!policy->governor)) + return; + + free(policy->governor); + policy->governor = NULL; + free(policy); +} + +struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned + int cpu) +{ + return sysfs_get_freq_available_governors(cpu); +} + +void cpufreq_put_available_governors(struct cpufreq_available_governors *any) +{ + struct cpufreq_available_governors *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + if (tmp->governor) + free(tmp->governor); + free(tmp); + tmp = next; + } +} + + +struct cpufreq_available_frequencies +*cpufreq_get_available_frequencies(unsigned int cpu) +{ + return sysfs_get_available_frequencies(cpu); +} + +void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies + *any) { + struct cpufreq_available_frequencies *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + free(tmp); + tmp = next; + } +} + + +struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu) +{ + return sysfs_get_freq_affected_cpus(cpu); +} + +void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any) +{ + struct cpufreq_affected_cpus *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + free(tmp); + tmp = next; + } +} + + +struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu) +{ + return sysfs_get_freq_related_cpus(cpu); +} + +void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any) +{ + cpufreq_put_affected_cpus(any); +} + + +int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy) +{ + if (!policy || !(policy->governor)) + return -EINVAL; + + return sysfs_set_freq_policy(cpu, policy); +} + + +int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq) +{ + return sysfs_modify_freq_policy_min(cpu, min_freq); +} + + +int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq) +{ + return sysfs_modify_freq_policy_max(cpu, max_freq); +} + + +int cpufreq_modify_policy_governor(unsigned int cpu, char *governor) +{ + if ((!governor) || (strlen(governor) > 19)) + return -EINVAL; + + return sysfs_modify_freq_policy_governor(cpu, governor); +} + +int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency) +{ + return sysfs_set_frequency(cpu, target_frequency); +} + +struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, + unsigned long long *total_time) +{ + return sysfs_get_freq_stats(cpu, total_time); +} + +void cpufreq_put_stats(struct cpufreq_stats *any) +{ + struct cpufreq_stats *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + free(tmp); + tmp = next; + } +} + +unsigned long cpufreq_get_transitions(unsigned int cpu) +{ + return sysfs_get_freq_transitions(cpu); +} diff --git a/tools/power/cpupower/lib/cpufreq.h b/tools/power/cpupower/lib/cpufreq.h new file mode 100644 index 0000000..3aae8e7 --- /dev/null +++ b/tools/power/cpupower/lib/cpufreq.h @@ -0,0 +1,223 @@ +/* + * cpufreq.h - definitions for libcpufreq + * + * Copyright (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _CPUFREQ_H +#define _CPUFREQ_H 1 + +struct cpufreq_policy { + unsigned long min; + unsigned long max; + char *governor; +}; + +struct cpufreq_available_governors { + char *governor; + struct cpufreq_available_governors *next; + struct cpufreq_available_governors *first; +}; + +struct cpufreq_available_frequencies { + unsigned long frequency; + struct cpufreq_available_frequencies *next; + struct cpufreq_available_frequencies *first; +}; + + +struct cpufreq_affected_cpus { + unsigned int cpu; + struct cpufreq_affected_cpus *next; + struct cpufreq_affected_cpus *first; +}; + +struct cpufreq_stats { + unsigned long frequency; + unsigned long long time_in_state; + struct cpufreq_stats *next; + struct cpufreq_stats *first; +}; + + + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * returns 0 if the specified CPU is present (it doesn't say + * whether it is online!), and an error value if not. + */ + +extern int cpufreq_cpu_exists(unsigned int cpu); + +/* determine current CPU frequency + * - _kernel variant means kernel's opinion of CPU frequency + * - _hardware variant means actual hardware CPU frequency, + * which is only available to root. + * + * returns 0 on failure, else frequency in kHz. + */ + +extern unsigned long cpufreq_get_freq_kernel(unsigned int cpu); + +extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu); + +#define cpufreq_get(cpu) cpufreq_get_freq_kernel(cpu); + + +/* determine CPU transition latency + * + * returns 0 on failure, else transition latency in 10^(-9) s = nanoseconds + */ +extern unsigned long cpufreq_get_transition_latency(unsigned int cpu); + + +/* determine hardware CPU frequency limits + * + * These may be limited further by thermal, energy or other + * considerations by cpufreq policy notifiers in the kernel. + */ + +extern int cpufreq_get_hardware_limits(unsigned int cpu, + unsigned long *min, + unsigned long *max); + + +/* determine CPUfreq driver used + * + * Remember to call cpufreq_put_driver when no longer needed + * to avoid memory leakage, please. + */ + +extern char *cpufreq_get_driver(unsigned int cpu); + +extern void cpufreq_put_driver(char *ptr); + + +/* determine CPUfreq policy currently used + * + * Remember to call cpufreq_put_policy when no longer needed + * to avoid memory leakage, please. + */ + + +extern struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu); + +extern void cpufreq_put_policy(struct cpufreq_policy *policy); + + +/* determine CPUfreq governors currently available + * + * may be modified by modprobe'ing or rmmod'ing other governors. Please + * free allocated memory by calling cpufreq_put_available_governors + * after use. + */ + + +extern struct cpufreq_available_governors +*cpufreq_get_available_governors(unsigned int cpu); + +extern void cpufreq_put_available_governors( + struct cpufreq_available_governors *first); + + +/* determine CPU frequency states available + * + * Only present on _some_ ->target() cpufreq drivers. For information purposes + * only. Please free allocated memory by calling + * cpufreq_put_available_frequencies after use. + */ + +extern struct cpufreq_available_frequencies +*cpufreq_get_available_frequencies(unsigned int cpu); + +extern void cpufreq_put_available_frequencies( + struct cpufreq_available_frequencies *first); + + +/* determine affected CPUs + * + * Remember to call cpufreq_put_affected_cpus when no longer needed + * to avoid memory leakage, please. + */ + +extern struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned + int cpu); + +extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first); + + +/* determine related CPUs + * + * Remember to call cpufreq_put_related_cpus when no longer needed + * to avoid memory leakage, please. + */ + +extern struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned + int cpu); + +extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first); + + +/* determine stats for cpufreq subsystem + * + * This is not available in all kernel versions or configurations. + */ + +extern struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, + unsigned long long *total_time); + +extern void cpufreq_put_stats(struct cpufreq_stats *stats); + +extern unsigned long cpufreq_get_transitions(unsigned int cpu); + + +/* set new cpufreq policy + * + * Tries to set the passed policy as new policy as close as possible, + * but results may differ depending e.g. on governors being available. + */ + +extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy); + + +/* modify a policy by only changing min/max freq or governor + * + * Does not check whether result is what was intended. + */ + +extern int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq); +extern int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq); +extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor); + + +/* set a specific frequency + * + * Does only work if userspace governor can be used and no external + * interference (other calls to this function or to set/modify_policy) + * occurs. Also does not work on ->range() cpufreq drivers. + */ + +extern int cpufreq_set_frequency(unsigned int cpu, + unsigned long target_frequency); + +#ifdef __cplusplus +} +#endif + +#endif /* _CPUFREQ_H */ diff --git a/tools/power/cpupower/lib/sysfs.c b/tools/power/cpupower/lib/sysfs.c new file mode 100644 index 0000000..870713a --- /dev/null +++ b/tools/power/cpupower/lib/sysfs.c @@ -0,0 +1,672 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + */ + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <limits.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +#include "cpufreq.h" + +#define PATH_TO_CPU "/sys/devices/system/cpu/" +#define MAX_LINE_LEN 4096 +#define SYSFS_PATH_MAX 255 + + +static unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen) +{ + int fd; + ssize_t numread; + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + + +/* CPUFREQ sysfs access **************************************************/ + +/* helper function to read file from /sys into given buffer */ +/* fname is a relative path under "cpuX/cpufreq" dir */ +static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname, + char *buf, size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", + cpu, fname); + return sysfs_read_file(path, buf, buflen); +} + +/* helper function to write a new value to a /sys file */ +/* fname is a relative path under "cpuX/cpufreq" dir */ +static unsigned int sysfs_cpufreq_write_file(unsigned int cpu, + const char *fname, + const char *value, size_t len) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numwrite; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", + cpu, fname); + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + + close(fd); + + return (unsigned int) numwrite; +} + +/* read access to files which contain one numeric value */ + +enum cpufreq_value { + CPUINFO_CUR_FREQ, + CPUINFO_MIN_FREQ, + CPUINFO_MAX_FREQ, + CPUINFO_LATENCY, + SCALING_CUR_FREQ, + SCALING_MIN_FREQ, + SCALING_MAX_FREQ, + STATS_NUM_TRANSITIONS, + MAX_CPUFREQ_VALUE_READ_FILES +}; + +static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = { + [CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq", + [CPUINFO_MIN_FREQ] = "cpuinfo_min_freq", + [CPUINFO_MAX_FREQ] = "cpuinfo_max_freq", + [CPUINFO_LATENCY] = "cpuinfo_transition_latency", + [SCALING_CUR_FREQ] = "scaling_cur_freq", + [SCALING_MIN_FREQ] = "scaling_min_freq", + [SCALING_MAX_FREQ] = "scaling_max_freq", + [STATS_NUM_TRANSITIONS] = "stats/total_trans" +}; + + +static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu, + enum cpufreq_value which) +{ + unsigned long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_CPUFREQ_VALUE_READ_FILES) + return 0; + + len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which], + linebuf, sizeof(linebuf)); + + if (len == 0) + return 0; + + value = strtoul(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum cpufreq_string { + SCALING_DRIVER, + SCALING_GOVERNOR, + MAX_CPUFREQ_STRING_FILES +}; + +static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = { + [SCALING_DRIVER] = "scaling_driver", + [SCALING_GOVERNOR] = "scaling_governor", +}; + + +static char *sysfs_cpufreq_get_one_string(unsigned int cpu, + enum cpufreq_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUFREQ_STRING_FILES) + return NULL; + + len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +/* write access */ + +enum cpufreq_write { + WRITE_SCALING_MIN_FREQ, + WRITE_SCALING_MAX_FREQ, + WRITE_SCALING_GOVERNOR, + WRITE_SCALING_SET_SPEED, + MAX_CPUFREQ_WRITE_FILES +}; + +static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = { + [WRITE_SCALING_MIN_FREQ] = "scaling_min_freq", + [WRITE_SCALING_MAX_FREQ] = "scaling_max_freq", + [WRITE_SCALING_GOVERNOR] = "scaling_governor", + [WRITE_SCALING_SET_SPEED] = "scaling_setspeed", +}; + +static int sysfs_cpufreq_write_one_value(unsigned int cpu, + enum cpufreq_write which, + const char *new_value, size_t len) +{ + if (which >= MAX_CPUFREQ_WRITE_FILES) + return 0; + + if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which], + new_value, len) != len) + return -ENODEV; + + return 0; +}; + +unsigned long sysfs_get_freq_kernel(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ); +} + +unsigned long sysfs_get_freq_hardware(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ); +} + +unsigned long sysfs_get_freq_transition_latency(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY); +} + +int sysfs_get_freq_hardware_limits(unsigned int cpu, + unsigned long *min, + unsigned long *max) +{ + if ((!min) || (!max)) + return -EINVAL; + + *min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ); + if (!*min) + return -ENODEV; + + *max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ); + if (!*max) + return -ENODEV; + + return 0; +} + +char *sysfs_get_freq_driver(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER); +} + +struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu) +{ + struct cpufreq_policy *policy; + + policy = malloc(sizeof(struct cpufreq_policy)); + if (!policy) + return NULL; + + policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR); + if (!policy->governor) { + free(policy); + return NULL; + } + policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); + policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ); + if ((!policy->min) || (!policy->max)) { + free(policy->governor); + free(policy); + return NULL; + } + + return policy; +} + +struct cpufreq_available_governors * +sysfs_get_freq_available_governors(unsigned int cpu) { + struct cpufreq_available_governors *first = NULL; + struct cpufreq_available_governors *current = NULL; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + current->governor = malloc(i - pos + 1); + if (!current->governor) + goto error_out; + + memcpy(current->governor, linebuf + pos, i - pos); + current->governor[i - pos] = '\0'; + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + if (first->governor) + free(first->governor); + free(first); + first = current; + } + return NULL; +} + + +struct cpufreq_available_frequencies * +sysfs_get_available_frequencies(unsigned int cpu) { + struct cpufreq_available_frequencies *first = NULL; + struct cpufreq_available_frequencies *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu", ¤t->frequency) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu, + const char *file) +{ + struct cpufreq_affected_cpus *first = NULL; + struct cpufreq_affected_cpus *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 1) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + + if (sscanf(one_value, "%u", ¤t->cpu) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(unsigned int cpu) +{ + return sysfs_get_cpu_list(cpu, "affected_cpus"); +} + +struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(unsigned int cpu) +{ + return sysfs_get_cpu_list(cpu, "related_cpus"); +} + +struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu, + unsigned long long *total_time) { + struct cpufreq_stats *first = NULL; + struct cpufreq_stats *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + *total_time = 0; + pos = 0; + for (i = 0; i < len; i++) { + if (i == strlen(linebuf) || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if ((i - pos) >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + goto error_out; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu %llu", + ¤t->frequency, + ¤t->time_in_state) != 2) + goto error_out; + + *total_time = *total_time + current->time_in_state; + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +unsigned long sysfs_get_freq_transitions(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS); +} + +static int verify_gov(char *new_gov, char *passed_gov) +{ + unsigned int i, j = 0; + + if (!passed_gov || (strlen(passed_gov) > 19)) + return -EINVAL; + + strncpy(new_gov, passed_gov, 20); + for (i = 0; i < 20; i++) { + if (j) { + new_gov[i] = '\0'; + continue; + } + if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z')) + continue; + + if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z')) + continue; + + if (new_gov[i] == '-') + continue; + + if (new_gov[i] == '_') + continue; + + if (new_gov[i] == '\0') { + j = 1; + continue; + } + return -EINVAL; + } + new_gov[19] = '\0'; + return 0; +} + +int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor) +{ + char new_gov[SYSFS_PATH_MAX]; + + if (!governor) + return -EINVAL; + + if (verify_gov(new_gov, governor)) + return -EINVAL; + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, + new_gov, strlen(new_gov)); +}; + +int sysfs_modify_freq_policy_max(unsigned int cpu, unsigned long max_freq) +{ + char value[SYSFS_PATH_MAX]; + + snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + value, strlen(value)); +}; + + +int sysfs_modify_freq_policy_min(unsigned int cpu, unsigned long min_freq) +{ + char value[SYSFS_PATH_MAX]; + + snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, + value, strlen(value)); +}; + + +int sysfs_set_freq_policy(unsigned int cpu, struct cpufreq_policy *policy) +{ + char min[SYSFS_PATH_MAX]; + char max[SYSFS_PATH_MAX]; + char gov[SYSFS_PATH_MAX]; + int ret; + unsigned long old_min; + int write_max_first; + + if (!policy || !(policy->governor)) + return -EINVAL; + + if (policy->max < policy->min) + return -EINVAL; + + if (verify_gov(gov, policy->governor)) + return -EINVAL; + + snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min); + snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max); + + old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); + write_max_first = (old_min && (policy->max < old_min) ? 0 : 1); + + if (write_max_first) { + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + max, strlen(max)); + if (ret) + return ret; + } + + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min, + strlen(min)); + if (ret) + return ret; + + if (!write_max_first) { + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + max, strlen(max)); + if (ret) + return ret; + } + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, + gov, strlen(gov)); +} + +int sysfs_set_frequency(unsigned int cpu, unsigned long target_frequency) +{ + struct cpufreq_policy *pol = sysfs_get_freq_policy(cpu); + char userspace_gov[] = "userspace"; + char freq[SYSFS_PATH_MAX]; + int ret; + + if (!pol) + return -ENODEV; + + if (strncmp(pol->governor, userspace_gov, 9) != 0) { + ret = sysfs_modify_freq_policy_governor(cpu, userspace_gov); + if (ret) { + cpufreq_put_policy(pol); + return ret; + } + } + + cpufreq_put_policy(pol); + + snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED, + freq, strlen(freq)); +} + +/* CPUFREQ sysfs access **************************************************/ + +/* General sysfs access **************************************************/ +int sysfs_cpu_exists(unsigned int cpu) +{ + char file[SYSFS_PATH_MAX]; + struct stat statbuf; + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/", cpu); + + if (stat(file, &statbuf) != 0) + return -ENOSYS; + + return S_ISDIR(statbuf.st_mode) ? 0 : -ENOSYS; +} + +/* General sysfs access **************************************************/ diff --git a/tools/power/cpupower/lib/sysfs.h b/tools/power/cpupower/lib/sysfs.h new file mode 100644 index 0000000..c76a5e0 --- /dev/null +++ b/tools/power/cpupower/lib/sysfs.h @@ -0,0 +1,31 @@ +/* General */ +extern unsigned int sysfs_cpu_exists(unsigned int cpu); + +/* CPUfreq */ +extern unsigned long sysfs_get_freq_kernel(unsigned int cpu); +extern unsigned long sysfs_get_freq_hardware(unsigned int cpu); +extern unsigned long sysfs_get_freq_transition_latency(unsigned int cpu); +extern int sysfs_get_freq_hardware_limits(unsigned int cpu, + unsigned long *min, unsigned long *max); +extern char *sysfs_get_freq_driver(unsigned int cpu); +extern struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu); +extern struct cpufreq_available_governors *sysfs_get_freq_available_governors( + unsigned int cpu); +extern struct cpufreq_available_frequencies *sysfs_get_available_frequencies( + unsigned int cpu); +extern struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus( + unsigned int cpu); +extern struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus( + unsigned int cpu); +extern struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu, + unsigned long long *total_time); +extern unsigned long sysfs_get_freq_transitions(unsigned int cpu); +extern int sysfs_set_freq_policy(unsigned int cpu, + struct cpufreq_policy *policy); +extern int sysfs_modify_freq_policy_min(unsigned int cpu, + unsigned long min_freq); +extern int sysfs_modify_freq_policy_max(unsigned int cpu, + unsigned long max_freq); +extern int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor); +extern int sysfs_set_frequency(unsigned int cpu, + unsigned long target_frequency); diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1 new file mode 100644 index 0000000..3194811 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-frequency-info.1 @@ -0,0 +1,76 @@ +.TH "cpufreq-info" "1" "0.1" "Mattia Dongili" "" +.SH "NAME" +.LP +cpufreq\-info \- Utility to retrieve cpufreq kernel information +.SH "SYNTAX" +.LP +cpufreq\-info [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +A small tool which prints out cpufreq information helpful to developers and interested users. +.SH "OPTIONS" +.LP +.TP +\fB\-e\fR \fB\-\-debug\fR +Prints out debug information. +.TP +\fB\-f\fR \fB\-\-freq\fR +Get frequency the CPU currently runs at, according to the cpufreq core. +.TP +\fB\-w\fR \fB\-\-hwfreq\fR +Get frequency the CPU currently runs at, by reading it from hardware (only available to root). +.TP +\fB\-l\fR \fB\-\-hwlimits\fR +Determine the minimum and maximum CPU frequency allowed. +.TP +\fB\-d\fR \fB\-\-driver\fR +Determines the used cpufreq kernel driver. +.TP +\fB\-p\fR \fB\-\-policy\fR +Gets the currently used cpufreq policy. +.TP +\fB\-g\fR \fB\-\-governors\fR +Determines available cpufreq governors. +.TP +\fB\-a\fR \fB\-\-related\-cpus\fR +Determines which CPUs run at the same hardware frequency. +.TP +\fB\-a\fR \fB\-\-affected\-cpus\fR +Determines which CPUs need to have their frequency coordinated by software. +.TP +\fB\-s\fR \fB\-\-stats\fR +Shows cpufreq statistics if available. +.TP +\fB\-y\fR \fB\-\-latency\fR +Determines the maximum latency on CPU frequency changes. +.TP +\fB\-o\fR \fB\-\-proc\fR +Prints out information like provided by the /proc/cpufreq interface in 2.4. and early 2.6. kernels. +.TP +\fB\-m\fR \fB\-\-human\fR +human\-readable output for the \-f, \-w, \-s and \-y parameters. +.TP +\fB\-h\fR \fB\-\-help\fR +Prints out the help screen. +.SH "REMARKS" +.LP +By default only values of core zero are displayed. How to display settings of +other cores is described in the cpupower(1) manpage in the \-\-cpu option section. +.LP +You can't specify more than one of the output specific options \-o \-e \-a \-g \-p \-d \-l \-w \-f \-y. +.LP +You also can't specify the \-o option combined with the \-c option. +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP +\fI/proc/cpufreq\fP (deprecated) +\fI/proc/sys/cpu/\fP (deprecated) +.fi +.SH "AUTHORS" +.nf +Dominik Brodowski <linux@brodo.de> \- author +Mattia Dongili<malattia@gmail.com> \- first autolibtoolization +.fi +.SH "SEE ALSO" +.LP +cpupower\-frequency\-set(1), cpupower(1) diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1 new file mode 100644 index 0000000..26e3e13 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-frequency-set.1 @@ -0,0 +1,54 @@ +.TH "cpufreq-set" "1" "0.1" "Mattia Dongili" "" +.SH "NAME" +.LP +cpufreq\-set \- A small tool which allows to modify cpufreq settings. +.SH "SYNTAX" +.LP +cpufreq\-set [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +cpufreq\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time. +.SH "OPTIONS" +.LP +.TP +\fB\-d\fR \fB\-\-min\fR <FREQ> +new minimum CPU frequency the governor may select. +.TP +\fB\-u\fR \fB\-\-max\fR <FREQ> +new maximum CPU frequency the governor may select. +.TP +\fB\-g\fR \fB\-\-governor\fR <GOV> +new cpufreq governor. +.TP +\fB\-f\fR \fB\-\-freq\fR <FREQ> +specific frequency to be set. Requires userspace governor to be available and loaded. +.TP +\fB\-r\fR \fB\-\-related\fR +modify all hardware-related CPUs at the same time +.TP +\fB\-h\fR \fB\-\-help\fR +Prints out the help screen. +.SH "REMARKS" +.LP +By default values are applied on all cores. How to modify single core +configurations is described in the cpupower(1) manpage in the \-\-cpu option section. +.LP +The \-f FREQ, \-\-freq FREQ parameter cannot be combined with any other parameter. +.LP +FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (frequency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000). +.LP +On Linux kernels up to 2.6.29, the \-r or \-\-related parameter is ignored. +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP +\fI/proc/cpufreq\fP (deprecated) +\fI/proc/sys/cpu/\fP (deprecated) +.fi +.SH "AUTHORS" +.nf +Dominik Brodowski <linux@brodo.de> \- author +Mattia Dongili<malattia@gmail.com> \- first autolibtoolization +.fi +.SH "SEE ALSO" +.LP +cpupower\-frequency\-info(1), cpupower(1) diff --git a/tools/power/cpupower/man/cpupower-info.1 b/tools/power/cpupower/man/cpupower-info.1 new file mode 100644 index 0000000..58e2119 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-info.1 @@ -0,0 +1,19 @@ +.TH CPUPOWER\-INFO "1" "22/02/2011" "" "cpupower Manual" +.SH NAME +cpupower\-info \- Shows processor power related kernel or hardware configurations +.SH SYNOPSIS +.ft B +.B cpupower info [ \-b ] [ \-s ] [ \-m ] + +.SH DESCRIPTION +\fBcpupower info \fP shows kernel configurations or processor hardware +registers affecting processor power saving policies. + +Some options are platform wide, some affect single cores. By default values +of core zero are displayed only. cpupower --cpu all cpuinfo will show the +settings of all cores, see cpupower(1) how to choose specific cores. + +.SH "SEE ALSO" +Options are described in detail in: + +cpupower(1), cpupower-set(1) diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1 new file mode 100644 index 0000000..d5cfa26 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-monitor.1 @@ -0,0 +1,179 @@ +.TH CPUPOWER\-MONITOR "1" "22/02/2011" "" "cpupower Manual" +.SH NAME +cpupower\-monitor \- Report processor frequency and idle statistics +.SH SYNOPSIS +.ft B +.B cpupower monitor +.RB "\-l" + +.B cpupower monitor +.RB [ "\-m <mon1>," [ "<mon2>,..." ] ] +.RB [ "\-i seconds" ] +.br +.B cpupower monitor +.RB [ "\-m <mon1>," [ "<mon2>,..." ] ] +.RB command +.br +.SH DESCRIPTION +\fBcpupower-monitor \fP reports processor topology, frequency and idle power +state statistics. Either \fBcommand\fP is forked and +statistics are printed upon its completion, or statistics are printed periodically. + +\fBcpupower-monitor \fP implements independent processor sleep state and +frequency counters. Some are retrieved from kernel statistics, some are +directly reading out hardware registers. Use \-l to get an overview which are +supported on your system. + +.SH Options +.PP +\-l +.RS 4 +List available monitors on your system. Additional details about each monitor +are shown: +.RS 2 +.IP \(bu +The name in quotation marks which can be passed to the \-m parameter. +.IP \(bu +The number of different counters the monitor supports in brackets. +.IP \(bu +The amount of time in seconds the counters might overflow, due to +implementation constraints. +.IP \(bu +The name and a description of each counter and its processor hierarchy level +coverage in square brackets: +.RS 4 +.IP \(bu +[T] \-> Thread +.IP \(bu +[C] \-> Core +.IP \(bu +[P] \-> Processor Package (Socket) +.IP \(bu +[M] \-> Machine/Platform wide counter +.RE +.RE +.RE +.PP +\-m <mon1>,<mon2>,... +.RS 4 +Only display specific monitors. Use the monitor string(s) provided by \-l option. +.RE +.PP +\-i seconds +.RS 4 +Measure intervall. +.RE +.PP +command +.RS 4 +Measure idle and frequency characteristics of an arbitrary command/workload. +The executable \fBcommand\fP is forked and upon its exit, statistics gathered since it was +forked are displayed. +.RE +.PP +\-v +.RS 4 +Increase verbosity if the binary was compiled with the DEBUG option set. +.RE + +.SH MONITOR DESCRIPTIONS +.SS "Idle_Stats" +Shows statistics of the cpuidle kernel subsystem. Values are retrieved from +/sys/devices/system/cpu/cpu*/cpuidle/state*/. +The kernel updates these values every time an idle state is entered or +left. Therefore there can be some inaccuracy when cores are in an idle +state for some time when the measure starts or ends. In worst case it can happen +that one core stayed in an idle state for the whole measure time and the idle +state usage time as exported by the kernel did not get updated. In this case +a state residency of 0 percent is shown while it was 100. + +.SS "Mperf" +The name comes from the aperf/mperf (average and maximum) MSR registers used +which are available on recent X86 processors. It shows the average frequency +(including boost frequencies). +The fact that on all recent hardware the mperf timer stops ticking in any idle +state it is also used to show C0 (processor is active) and Cx (processor is in +any sleep state) times. These counters do not have the inaccuracy restrictions +the "Idle_Stats" counters may show. +May work poorly on Linux-2.6.20 through 2.6.29, as the \fBacpi-cpufreq \fP +kernel frequency driver periodically cleared aperf/mperf registers in those +kernels. + +.SS "Nehalem" "SandyBridge" +Intel Core and Package sleep state counters. +Threads (hyperthreaded cores) may not be able to enter deeper core states if +its sibling is utilized. +Deepest package sleep states may in reality show up as machine/platform wide +sleep states and can only be entered if all cores are idle. Look up Intel +manuals (some are provided in the References section) for further details. + +.SS "Ontario" "Liano" +AMD laptop and desktop processor (family 12h and 14h) sleep state counters. +The registers are accessed via PCI and therefore can still be read out while +cores have been offlined. + +There is one special counter: NBP1 (North Bridge P1). +This one always returns 0 or 1, depending on whether the North Bridge P1 +power state got entered at least once during measure time. +Being able to enter NBP1 state also depends on graphics power management. +Therefore this counter can be used to verify whether the graphics' driver +power management is working as expected. + +.SH EXAMPLES + +cpupower monitor -l" may show: +.RS 4 +Monitor "Mperf" (3 states) \- Might overflow after 922000000 s + + ... + +Monitor "Idle_Stats" (3 states) \- Might overflow after 4294967295 s + + ... + +.RE +cpupower monitor \-m "Idle_Stats,Mperf" scp /tmp/test /nfs/tmp + +Monitor the scp command, show both Mperf and Idle_Stats states counter +statistics, but in exchanged order. + + + +.RE +Be careful that the typical command to fully utilize one CPU by doing: + +cpupower monitor cat /dev/zero >/dev/null + +Does not work as expected, because the measured output is redirected to +/dev/null. This could get workarounded by putting the line into an own, tiny +shell script. Hit CTRL\-c to terminate the command and get the measure output +displayed. + +.SH REFERENCES +"BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 14h Processors" +http://support.amd.com/us/Processor_TechDocs/43170.pdf + +"Intel® Turbo Boost Technology +in Intel® Coreâ„¢ Microarchitecture (Nehalem) Based Processors" +http://download.intel.com/design/processor/applnots/320354.pdf + +"Intel® 64 and IA-32 Architectures Software Developer's Manual +Volume 3B: System Programming Guide" +http://www.intel.com/products/processor/manuals + +.SH FILES +.ta +.nf +/dev/cpu/*/msr +/sys/devices/system/cpu/cpu*/cpuidle/state*/. +.fi + +.SH "SEE ALSO" +powertop(8), msr(4), vmstat(8) +.PP +.SH AUTHORS +.nf +Written by Thomas Renninger <trenn@suse.de> + +Nehalem, SandyBridge monitors and command passing +based on turbostat.8 from Len Brown <len.brown@intel.com> diff --git a/tools/power/cpupower/man/cpupower-set.1 b/tools/power/cpupower/man/cpupower-set.1 new file mode 100644 index 0000000..c4954a9 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-set.1 @@ -0,0 +1,103 @@ +.TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual" +.SH NAME +cpupower\-set \- Set processor power related kernel or hardware configurations +.SH SYNOPSIS +.ft B +.B cpupower set [ \-b VAL ] [ \-s VAL ] [ \-m VAL ] + + +.SH DESCRIPTION +\fBcpupower set \fP sets kernel configurations or directly accesses hardware +registers affecting processor power saving policies. + +Some options are platform wide, some affect single cores. By default values +are applied on all cores. How to modify single core configurations is +described in the cpupower(1) manpage in the \-\-cpu option section. Whether an +option affects the whole system or can be applied to individual cores is +described in the Options sections. + +Use \fBcpupower info \fP to read out current settings and whether they are +supported on the system at all. + +.SH Options +.PP +\-\-perf-bias, \-b +.RS 4 +Sets a register on supported Intel processore which allows software to convey +its policy for the relative importance of performance versus energy savings to +the processor. + +The range of valid numbers is 0-15, where 0 is maximum +performance and 15 is maximum energy efficiency. + +The processor uses this information in model-specific ways +when it must select trade-offs between performance and +energy efficiency. + +This policy hint does not supersede Processor Performance states +(P-states) or CPU Idle power states (C-states), but allows +software to have influence where it would otherwise be unable +to express a preference. + +For example, this setting may tell the hardware how +aggressively or conservatively to control frequency +in the "turbo range" above the explicitly OS-controlled +P-state frequency range. It may also tell the hardware +how aggressively it should enter the OS requested C-states. + +This option can be applied to individual cores only via the \-\-cpu option, +cpupower(1). + +Setting the performance bias value on one CPU can modify the setting on +related CPUs as well (for example all CPUs on one socket), because of +hardware restrictions. +Use \fBcpupower -c all info -b\fP to verify. + +This options needs the msr kernel driver (CONFIG_X86_MSR) loaded. +.RE +.PP +\-\-sched\-mc, \-m [ VAL ] +.RE +\-\-sched\-smt, \-s [ VAL ] +.RS 4 +\-\-sched\-mc utilizes cores in one processor package/socket first before +processes are scheduled to other processor packages/sockets. + +\-\-sched\-smt utilizes thread siblings of one processor core first before +processes are scheduled to other cores. + +The impact on power consumption and performance (positiv or negativ) heavily +depends on processor support for deep sleep states, frequency scaling and +frequency boost modes and their dependencies between other thread siblings +and processor cores. + +Taken over from kernel documentation: + +Adjust the kernel's multi-core scheduler support. + +Possible values are: +.RS 2 +0 - No power saving load balance (default value) + +1 - Fill one thread/core/package first for long running threads + +2 - Also bias task wakeups to semi-idle cpu package for power +savings +.RE + +sched_mc_power_savings is dependent upon SCHED_MC, which is +itself architecture dependent. + +sched_smt_power_savings is dependent upon SCHED_SMT, which +is itself architecture dependent. + +The two files are independent of each other. It is possible +that one file may be present without the other. + +.SH "SEE ALSO" +cpupower-info(1), cpupower-monitor(1), powertop(1) +.PP +.SH AUTHORS +.nf +\-\-perf\-bias parts written by Len Brown <len.brown@intel.com> +Thomas Renninger <trenn@suse.de> diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1 new file mode 100644 index 0000000..78c20fe --- /dev/null +++ b/tools/power/cpupower/man/cpupower.1 @@ -0,0 +1,72 @@ +.TH CPUPOWER "1" "07/03/2011" "" "cpupower Manual" +.SH NAME +cpupower \- Shows and sets processor power related values +.SH SYNOPSIS +.ft B +.B cpupower [ \-c cpulist ] subcommand [ARGS] + +.B cpupower \-v|\-\-version + +.B cpupower \-h|\-\-help + +.SH DESCRIPTION +\fBcpupower \fP is a collection of tools to examine and tune power saving +related features of your processor. + +The manpages of the subcommands (cpupower\-<subcommand>(1)) provide detailed +descriptions of supported features. Run \fBcpupower help\fP to get an overview +of supported subcommands. + +.SH Options +.PP +\-\-help, \-h +.RS 4 +Shows supported subcommands and general usage. +.RE +.PP +\-\-cpu cpulist, \-c cpulist +.RS 4 +Only show or set values for specific cores. +This option is not supported by all subcommands, details can be found in the +manpages of the subcommands. + +Some subcommands access all cores (typically the *\-set commands), some only +the first core (typically the *\-info commands) by default. + +The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via +sysfs files. Some examples: +.RS 4 +.TP 16 +Input +Equivalent to +.TP +all +all cores +.TP +0\-3 +0,1,2,3 +.TP +0\-7:2 +0,2,4,6 +.TP +1,3,5-7 +1,3,5,6,7 +.TP +0\-3:2,8\-15:4 +0,2,8,12 +.RE +.RE +.PP +\-\-version, \-v +.RS 4 +Print the package name and version number. + +.SH "SEE ALSO" +cpupower-set(1), cpupower-info(1), cpupower-idle(1), +cpupower-frequency-set(1), cpupower-frequency-info(1), cpupower-monitor(1), +powertop(1) +.PP +.SH AUTHORS +.nf +\-\-perf\-bias parts written by Len Brown <len.brown@intel.com> +Thomas Renninger <trenn@suse.de> diff --git a/tools/power/cpupower/po/cs.po b/tools/power/cpupower/po/cs.po new file mode 100644 index 0000000..cb22c45 --- /dev/null +++ b/tools/power/cpupower/po/cs.po @@ -0,0 +1,944 @@ +# translation of cs.po to Czech +# Czech translation for cpufrequtils package +# Czech messages for cpufrequtils. +# Copyright (C) 2007 kavol +# This file is distributed under the same license as the cpufrequtils package. +# +# Karel Volný <kavol@seznam.cz>, 2007, 2008. +msgid "" +msgstr "" +"Project-Id-Version: cs\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2008-06-11 16:26+0200\n" +"Last-Translator: Karel Volný <kavol@seznam.cz>\n" +"Language-Team: Czech <diskuze@lists.l10n.cz>\n" +"Language: cs\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +"X-Generator: KBabel 1.11.4\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time intervall to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "" +"Chyby v programu prosÃm hlaste na %s (anglicky).\n" +"Chyby v pÅ™ekladu prosÃm hlaste na kavol@seznam.cz (Äesky ;-)\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Nelze zjistit poÄet CPU (%s: %s), pÅ™edpokládá se 1.\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" minimálnà frekvence CPU - maximálnà frekvence CPU - regulátor\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " ovladaÄ: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " pro tento CPU nenà aktivnà žádný známý ovladaÄ cpufreq\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " ovladaÄ: %s\n" + +#: utils/cpufreq-info.c:219 +#, fuzzy, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPU, které musà mÄ›nit frekvenci zároveň: " + +#: utils/cpufreq-info.c:230 +#, fuzzy, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPU, které musà mÄ›nit frekvenci zároveň: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr "" + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " hardwarové meze: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " dostupné frekvence: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " dostupné regulátory: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " souÄasná taktika: frekvence by mÄ›la být mezi " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " a " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" Regulátor \"%s\" může rozhodnout jakou frekvenci použÃt\n" +" v tÄ›chto mezÃch.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " souÄasná frekvence CPU je " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (zjiÅ¡tÄ›no hardwarovým volánÃm)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " statistika cpufreq: " + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "UžitÃ: cpufreq-info [pÅ™epÃnaÄe]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "PÅ™epÃnaÄe:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug VypÃÅ¡e ladicà informace\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Zjistà aktuálnà frekvenci, na které CPU běžÃ\n" +" podle cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Zjistà aktuálnà frekvenci, na které CPU běžÃ\n" +" z hardware (dostupné jen uživateli root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Zjistà minimálnà a maximálnà dostupnou frekvenci CPU " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Zjistà aktivnà ovladaÄ cpufreq *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Zjistà aktuálnà taktiku cpufreq *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Zjistà dostupné regulátory cpufreq *\n" + +#: utils/cpufreq-info.c:483 +#, fuzzy, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -a, --affected-cpus ZjistÃ, které CPU musà mÄ›nit frekvenci zároveň *\n" + +#: utils/cpufreq-info.c:484 +#, fuzzy, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus ZjistÃ, které CPU musà mÄ›nit frekvenci zároveň *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Zobrazà statistiku cpufreq, je-li dostupná\n" + +#: utils/cpufreq-info.c:487 +#, fuzzy, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -l, --hwlimits Zjistà minimálnà a maximálnà dostupnou frekvenci CPU " +"*\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc VypÃÅ¡e informace ve formátu, jaký použÃvalo rozhranÃ\n" +" /proc/cpufreq v kernelech Å™ady 2.4 a Äasné 2.6\n" + +#: utils/cpufreq-info.c:491 +#, fuzzy, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human Výstup parametrů -f, -w a -s v „lidmi Äitelném“ " +"formátu\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help VypÃÅ¡e tuto nápovÄ›du\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"NenÃ-li zadán žádný parametr nebo je-li zadán pouze pÅ™epÃnaÄ -c, --cpu, " +"jsou\n" +"vypsány ladicà informace, což může být užiteÄné napÅ™Ãklad pÅ™i hlášenà chyb.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"NenÃ-li pÅ™i použità pÅ™epÃnaÄů oznaÄených * zadán parametr -c nebo --cpu,\n" +"pÅ™edpokládá se jeho hodnota 0.\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Zadaný parametr nemůže být použit zároveň s pÅ™epÃnaÄem -c nebo --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Nelze zadat vÃce než jeden parametr -c nebo --cpu\n" +"anebo vÃce než jeden parametr urÄujÃcà výstup\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "neplatný nebo neznámý parametr\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "nelze analyzovat CPU %d, vypadá to, že nenà pÅ™Ãtomen\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analyzuji CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "UžitÃ: cpufreq-set [pÅ™epÃnaÄe]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ Nová nejnižšà frekvence, kterou může regulátor " +"vybrat\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ Nová nejvyÅ¡Å¡Ã frekvence, kterou může regulátor " +"zvolit\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governors GOV Nový regulátor cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ Frekvence, která má být nastavena. Vyžaduje, aby " +"byl\n" +" v jádÅ™e nahrán regulátor ‚userspace‘.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, fuzzy, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help VypÃÅ¡e tuto nápovÄ›du\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"NenÃ-li pÅ™i použità pÅ™epÃnaÄů oznaÄených * zadán parametr -c nebo --cpu,\n" +"pÅ™edpokládá se jeho hodnota 0.\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Poznámky:\n" +"1. Vynechánà parametru -c nebo --cpu je ekvivalentnà jeho nastavenà na 0\n" +"2. PÅ™epÃnaÄ -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -" +"c\n" +" nebo --cpu\n" +"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozÃ), MHz, GHz nebo THz\n" +" pÅ™ipojenÃm názvu jednotky bez mezery mezi ÄÃslem a jednotkou\n" +" (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Chyba pÅ™i nastavovánà nových hodnot. Obvyklé problémy:\n" +"- Máte patÅ™iÄná administrátorská práva? (root?)\n" +"- Je požadovaný regulátor dostupný v jádÅ™e? (modprobe?)\n" +"- SnažÃte se nastavit neplatnou taktiku?\n" +"- SnažÃte se nastavit urÄitou frekvenci, ale nenà dostupný\n" +" regulátor ‚userspace‘, napÅ™Ãklad protože nenà nahrán v jádÅ™e,\n" +" nebo nelze na tomto hardware nastavit urÄitou frekvenci?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "neznámý nebo nepodporovaný CPU?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"pÅ™epÃnaÄ -f/--freq nemůže být použit zároveň\n" +"s pÅ™epÃnaÄem -d/--min, -u/--max nebo -g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Musà být zadán alespoň jeden pÅ™epÃnaÄ\n" +"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Zjistà aktuálnà taktiku cpufreq *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analyzuji CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " dostupné frekvence: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " ovladaÄ: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "UžitÃ: cpufreq-info [pÅ™epÃnaÄe]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug VypÃÅ¡e ladicà informace\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc VypÃÅ¡e informace ve formátu, jaký použÃvalo rozhranÃ\n" +" /proc/cpufreq v kernelech Å™ady 2.4 a Äasné 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Nelze zadat vÃce než jeden parametr -c nebo --cpu\n" +"anebo vÃce než jeden parametr urÄujÃcà výstup\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU ÄŒÃslo CPU, o kterém se majà zjistit informace\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU ÄŒÃslo CPU pro který se má provést nastavenà " +#~ "cpufreq\n" diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po new file mode 100644 index 0000000..78c09e5 --- /dev/null +++ b/tools/power/cpupower/po/de.po @@ -0,0 +1,961 @@ +# German translations for cpufrequtils package +# German messages for cpufrequtils. +# Copyright (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.net> +# This file is distributed under the same license as the cpufrequtils package. +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 006\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2009-08-08 17:18+0100\n" +"Last-Translator: <linux@dominikbrodowski.net>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time intervall to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Bitte melden Sie Fehler an %s.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "" +"Konnte nicht die Anzahl der CPUs herausfinden (%s : %s), nehme daher 1 an.\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" minimale CPU-Taktfreq. - maximale CPU-Taktfreq. - Regler \n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " Treiber: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " kein oder nicht bestimmbarer cpufreq-Treiber aktiv\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " Treiber: %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " Die Taktfrequenz folgender CPUs werden per Software koordiniert: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " Maximale Dauer eines Taktfrequenzwechsels: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " Hardwarebedingte Grenzen der Taktfrequenz: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " mögliche Taktfrequenzen: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " mögliche Regler: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " momentane Taktik: die Frequenz soll innerhalb " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " und " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" liegen. Der Regler \"%s\" kann frei entscheiden,\n" +" welche Taktfrequenz innerhalb dieser Grenze verwendet " +"wird.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " momentane Taktfrequenz ist " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (verifiziert durch Nachfrage bei der Hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " Statistik:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Aufruf: cpufreq-info [Optionen]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Optionen:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr "" +" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n" +" zum Aufspüren von Fehlern\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Findet die momentane CPU-Taktfrquenz heraus (nach\n" +" Meinung des Betriebssystems) *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Findet die momentane CPU-Taktfrequenz heraus\n" +" (verifiziert durch Nachfrage bei der Hardware)\n" +" [nur der Administrator kann dies tun] *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Findet die minimale und maximale Taktfrequenz heraus " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Findet den momentanen Treiber heraus *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Findet die momentane Taktik heraus *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Erzeugt eine Liste mit verfügbaren Reglern *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Findet heraus, welche CPUs mit derselben " +"physikalischen\n" +" Taktfrequenz laufen *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Findet heraus, von welchen CPUs die Taktfrequenz " +"durch\n" +" Software koordiniert werden muss *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr "" +" -s, --stats Zeigt, sofern möglich, Statistiken über cpufreq an.\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Findet die maximale Dauer eines Taktfrequenzwechsels " +"heraus *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu " +"dem\n" +" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n" +" Kernel-Versionen\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human Formatiert Taktfrequenz- und Zeitdauerangaben in " +"besser\n" +" lesbarer Form (MHz, GHz; us, ms)\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Gibt diese Kurzübersicht aus\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Sofern kein anderer Parameter als '-c, --cpu' angegeben wird, liefert " +"dieses\n" +"Programm Informationen, die z.B. zum Berichten von Fehlern nützlich sind.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n" +"mittels -c oder --cpu etwas anderes angegeben wird\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Diese Option kann nicht mit der --cpu-Option kombiniert werden\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n" +"informationsspezifischen Parameter gleichzeitig angeben\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "unbekannter oder falscher Parameter\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "" +"Konnte nicht die CPU %d analysieren, da sie (scheinbar?) nicht existiert.\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analysiere CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Aufruf: cpufreq-set [Optionen]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ neue minimale Taktfrequenz, die der Regler\n" +" auswählen darf\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ neue maximale Taktfrequenz, die der Regler\n" +" auswählen darf\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governors GOV wechsle zu Regler GOV\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ setze exakte Taktfrequenz. Benötigt den Regler\n" +" 'userspace'.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Setze Werte für alle CPUs, deren Taktfrequenz\n" +" hardwarebedingt identisch ist.\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Gibt diese Kurzübersicht aus\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n" +"mittels -c oder --cpu etwas anderes angegeben wird\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Hinweise:\n" +"1. Sofern kein -c oder --cpu-Parameter angegeben ist, wird '--cpu 0'\n" +" angenommen\n" +"2. Der Parameter -f bzw. --freq kann mit keinem anderen als dem Parameter\n" +" -c bzw. --cpu kombiniert werden\n" +"3. FREQuenzen können in Hz, kHz (Standard), MHz, GHz oder THz eingegeben\n" +" werden, indem der Wert und unmittelbar anschließend (ohne Leerzeichen!)\n" +" die Einheit angegeben werden. (Bsp: 1GHz )\n" +" (FREQuenz in kHz =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n" +"- nicht ausreichende Rechte (Administrator)\n" +"- der Regler ist nicht verfügbar bzw. nicht geladen\n" +"- die angegebene Taktik ist inkorrekt\n" +"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n" +" kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "unbekannte oder nicht regelbare CPU\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, -u/--" +"max\n" +"oder -g/--governor kombiniert werden\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Es muss mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max oder\n" +"-g/--governor angegeben werden.\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Findet die momentane Taktik heraus *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analysiere CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " mögliche Taktfrequenzen: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " Treiber: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " Maximale Dauer eines Taktfrequenzwechsels: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Aufruf: cpufreq-info [Optionen]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr "" +" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n" +" zum Aufspüren von Fehlern\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu " +"dem\n" +" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n" +" Kernel-Versionen\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n" +"informationsspezifischen Parameter gleichzeitig angeben\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Nummer der CPU, über die Informationen " +#~ "herausgefunden werden sollen\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Nummer der CPU, deren Taktfrequenz-" +#~ "Einstellung\n" +#~ " werden soll\n" diff --git a/tools/power/cpupower/po/fr.po b/tools/power/cpupower/po/fr.po new file mode 100644 index 0000000..245ad20 --- /dev/null +++ b/tools/power/cpupower/po/fr.po @@ -0,0 +1,947 @@ +# French translations for cpufrequtils package +# Copyright (C) 2004 THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the cpufrequtils package. +# Ducrot Bruno <ducrot@poupinou.org>, 2004. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 0.1-pre2\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2004-11-17 15:53+1000\n" +"Last-Translator: Bruno Ducrot <ducrot@poupinou.org>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time intervall to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Veuillez rapportez les erreurs et les bogues à %s, s'il vous plait.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Détermination du nombre de CPUs (%s : %s) impossible. Assume 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" Fréquence CPU minimale - Fréquence CPU maximale - régulateur\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " pas de pilotes cpufreq reconnu pour ce CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpufreq-info.c:219 +#, fuzzy, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs qui doivent changer de fréquences en même temps : " + +#: utils/cpufreq-info.c:230 +#, fuzzy, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs qui doivent changer de fréquences en même temps : " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr "" + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limitation matérielle : " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " plage de fréquence : " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " régulateurs disponibles : " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " tactique actuelle : la fréquence doit être comprise entre " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " et " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +"Le régulateur \"%s\" est libre de choisir la vitesse\n" +" dans cette plage de fréquences.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " la fréquence actuelle de ce CPU est " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (vérifié par un appel direct du matériel)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " des statistique concernant cpufreq:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Usage : cpufreq-info [options]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Options :\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Afficher les informations de déboguage\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Obtenir la fréquence actuelle du CPU selon le point\n" +" de vue du coeur du système de cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Obtenir la fréquence actuelle du CPU directement par\n" +" le matériel (doit être root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Affiche les fréquences minimales et maximales du CPU " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Affiche le pilote cpufreq utilisé *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr "" +" -g, --governors Affiche les régulateurs disponibles de cpufreq *\n" + +#: utils/cpufreq-info.c:483 +#, fuzzy, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n" +" fréquences en même temps *\n" + +#: utils/cpufreq-info.c:484 +#, fuzzy, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n" +" fréquences en même temps *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr "" +" -s, --stats Indique des statistiques concernant cpufreq, si\n" +" disponibles\n" + +#: utils/cpufreq-info.c:487 +#, fuzzy, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -l, --hwlimits Affiche les fréquences minimales et maximales du CPU " +"*\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Affiche les informations en utilisant l'interface\n" +" fournie par /proc/cpufreq, présente dans les " +"versions\n" +" 2.4 et les anciennes versions 2.6 du noyau\n" + +#: utils/cpufreq-info.c:491 +#, fuzzy, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human affiche dans un format lisible pour un humain\n" +" pour les options -f, -w et -s (MHz, GHz)\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help affiche l'aide-mémoire\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Par défaut, les informations de déboguage seront affichées si aucun\n" +"argument, ou bien si seulement l'argument -c (--cpu) est donné, afin de\n" +"faciliter les rapports de bogues par exemple\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Cette option est incompatible avec --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n" +"spécifier plus d'un argument de formatage\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "option invalide\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "analyse du CPU %d impossible puisqu'il ne semble pas être présent\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analyse du CPU %d :\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Usage : cpufreq-set [options]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ nouvelle fréquence minimale du CPU à utiliser\n" +" par le régulateur\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ nouvelle fréquence maximale du CPU à utiliser\n" +" par le régulateur\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV active le régulateur GOV\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ fixe la fréquence du processeur à FREQ. Il faut\n" +" que le régulateur « userspace » soit disponible \n" +" et activé.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, fuzzy, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help affiche l'aide-mémoire\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Remarque :\n" +"1. Le CPU numéro 0 sera utilisé par défaut si -c (ou --cpu) est omis ;\n" +"2. l'argument -f FREQ (ou --freq FREQ) ne peut être utilisé qu'avec --cpu ;\n" +"3. on pourra préciser l'unité des fréquences en postfixant sans aucune " +"espace\n" +" les valeurs par hz, kHz (par défaut), MHz, GHz ou THz\n" +" (kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"En ajustant les nouveaux paramètres, une erreur est apparue. Les sources\n" +"d'erreur typique sont :\n" +"- droit d'administration insuffisant (êtes-vous root ?) ;\n" +"- le régulateur choisi n'est pas disponible, ou bien n'est pas disponible " +"en\n" +" tant que module noyau ;\n" +"- la tactique n'est pas disponible ;\n" +"- vous voulez utiliser l'option -f/--freq, mais le régulateur « userspace »\n" +" n'est pas disponible, par exemple parce que le matériel ne le supporte\n" +" pas, ou bien n'est tout simplement pas chargé.\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU inconnu ou non supporté ?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"l'option -f/--freq est incompatible avec les options -d/--min, -u/--max et\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"L'un de ces paramètres est obligatoire : -f/--freq, -d/--min, -u/--max et\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analyse du CPU %d :\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " plage de fréquence : " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Usage : cpufreq-info [options]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Afficher les informations de déboguage\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Affiche les informations en utilisant l'interface\n" +" fournie par /proc/cpufreq, présente dans les " +"versions\n" +" 2.4 et les anciennes versions 2.6 du noyau\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n" +"spécifier plus d'un argument de formatage\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Numéro du CPU pour lequel l'information sera " +#~ "affichée\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU numéro du CPU à prendre en compte pour les\n" +#~ " changements\n" diff --git a/tools/power/cpupower/po/it.po b/tools/power/cpupower/po/it.po new file mode 100644 index 0000000..f80c4dd --- /dev/null +++ b/tools/power/cpupower/po/it.po @@ -0,0 +1,961 @@ +# Italian translations for cpufrequtils package +# Copyright (C) 2004-2009 +# This file is distributed under the same license as the cpufrequtils package. +# Mattia Dongili <malattia@gmail.com>. +# +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 0.3\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2009-08-15 12:00+0900\n" +"Last-Translator: Mattia Dongili <malattia@gmail.com>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time intervall to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Per favore, comunicare errori e malfunzionamenti a %s.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Impossibile determinare il numero di CPU (%s: %s), assumo sia 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" frequenza minima CPU - frequenza massima CPU - gestore\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " modulo %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " nessun modulo o modulo cpufreq sconosciuto per questa CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " modulo %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPU che operano alla stessa frequenza hardware: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPU che è necessario siano coordinate dal software: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " latenza massima durante la transizione: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limiti hardware: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " frequenze disponibili: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " gestori disponibili: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " gestore attuale: la frequenza deve mantenersi tra " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " e " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" Il gestore \"%s\" può decidere quale velocità usare\n" +" in questo intervallo.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " la frequenza attuale della CPU è " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (ottenuta da una chiamata diretta all'hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " statistiche cpufreq:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Uso: cpufreq-info [opzioni]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Opzioni:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Mostra informazioni di debug\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Mostra la frequenza attuale della CPU secondo\n" +" il modulo cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Mostra la frequenza attuale della CPU leggendola\n" +" dall'hardware (disponibile solo per l'utente root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Determina le frequenze minima e massima possibili per " +"la CPU *\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr "" +" -d, --driver Determina il modulo cpufreq del kernel in uso *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr "" +" -p, --policy Mostra il gestore cpufreq attualmente in uso *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Determina i gestori cpufreq disponibili *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Determina quali CPU operano alla stessa frequenza *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Determina quali CPU devono avere la frequenza\n" +" coordinata dal software *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Mostra le statistiche se disponibili\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Determina la latenza massima durante i cambi di " +"frequenza *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Stampa le informazioni come se provenissero dalla\n" +" interfaccia cpufreq /proc/ presente nei kernel\n" +" 2.4 ed i primi 2.6\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human formatta l'output delle opzioni -f, -w, -s e -y in " +"maniera\n" +" leggibile da un essere umano\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Stampa questa schermata\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Se non viene specificata nessuna opzione o viene specificata solo l'opzione -" +"c, --cpu,\n" +"le informazioni di debug per cpufreq saranno utili ad esempio a riportare i " +"bug.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come " +"specificarla\n" +"con il valore 0\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "" +"L'opzione specificata a questo programma non può essere combinata con --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Non è possibile specificare più di una volta l'opzione --cpu e/o\n" +"specificare più di un parametro di output specifico\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "opzione sconosciuta o non valida\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "impossibile analizzare la CPU %d poiché non sembra essere presente\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analisi della CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Uso: cpufreq-set [opzioni]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ la nuova frequenza minima che il gestore cpufreq " +"può scegliere\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ la nuova frequenza massima che il gestore cpufreq " +"può scegliere\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV nuovo gestore cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ specifica la frequenza a cui impostare la CPU.\n" +" È necessario che il gestore userspace sia " +"disponibile e caricato\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Modifica tutte le CPU coordinate dall'hardware\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Stampa questa schermata\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come " +"specificarla\n" +"con il valore 0\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Note:\n" +"1. Omettere l'opzione -c o --cpu è equivalente a impostarlo a 0\n" +"2. l'opzione -f FREQ, --freq FREQ non può essere specificata con altre " +"opzioni\n" +" ad eccezione dell'opzione -c CPU o --cpu CPU\n" +"3. le FREQuenze possono essere specuficate in Hz, kHz (default), MHz, GHz, " +"or THz\n" +" postponendo l'unità di misura al valore senza nessuno spazio fra loro\n" +" (FREQuenza in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Si sono verificati degli errori impostando i nuovi valori.\n" +"Alcuni errori comuni possono essere:\n" +"- Hai i necessari diritti di amministrazione? (super-user?)\n" +"- Il gestore che hai richiesto è disponibile e caricato?\n" +"- Stai provando ad impostare una politica di gestione non valida?\n" +"- Stai provando a impostare una specifica frequenza ma il gestore\n" +" userspace non è disponibile, per esempio a causa dell'hardware\n" +" che non supporta frequenze fisse o a causa del fatto che\n" +" il gestore userspace non è caricato?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU errata, sconosciuta o non gestita?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"l'opzione -f/--freq non può venire combinata con i parametri\n" +" -d/--min, -u/--max o -g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Almeno una delle opzioni -f/--freq, -d/--min, -u/--max, e -g/--governor\n" +"deve essere specificata\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +" -p, --policy Mostra il gestore cpufreq attualmente in uso *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analisi della CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " frequenze disponibili: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " modulo %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " latenza massima durante la transizione: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Uso: cpufreq-info [opzioni]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Mostra informazioni di debug\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Stampa le informazioni come se provenissero dalla\n" +" interfaccia cpufreq /proc/ presente nei kernel\n" +" 2.4 ed i primi 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Non è possibile specificare più di una volta l'opzione --cpu e/o\n" +"specificare più di un parametro di output specifico\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Numero di CPU per la quale ottenere le " +#~ "informazioni\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU numero di CPU per la quale modificare le " +#~ "impostazioni\n" + +#, fuzzy +#~ msgid " CPUs which coordinate software frequency requirements: " +#~ msgstr "" +#~ " CPU per le quali e` necessario cambiare la frequenza " +#~ "contemporaneamente: " diff --git a/tools/power/cpupower/po/pt.po b/tools/power/cpupower/po/pt.po new file mode 100644 index 0000000..990f526 --- /dev/null +++ b/tools/power/cpupower/po/pt.po @@ -0,0 +1,957 @@ +# Brazilian Portuguese translations for cpufrequtils package +# Copyright (C) 2008 THE cpufrequtils'S COPYRIGHT HOLDER +# This file is distributed under the same license as the cpufrequtils package. +# Claudio Eduardo <claudioeddy@gmail.com>, 2009. +# +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 004\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2008-06-14 22:16-0400\n" +"Last-Translator: Claudio Eduardo <claudioeddy@gmail.com>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time intervall to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Reporte erros e bugs para %s, por favor.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Não foi possÃvel contar o número de CPUs (%s: %s), assumindo 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" frequência mÃnina do CPU - frequência máxima do CPU - " +"regulador\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " driver: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " nenhum ou driver do cpufreq deconhecido está ativo nesse CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " driver: %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs que rodam na mesma frequência de hardware: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs que precisam ter suas frequências coordenadas por software: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " maior latência de transição: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limites do hardware: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " nÃveis de frequência disponÃveis: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " reguladores do cpufreq disponÃveis: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " polÃtica de frequência atual deve estar entre " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " e " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +"O regulador \"%s\" deve decidir qual velocidade usar\n" +" dentro desse limite.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " frequência atual do CPU é " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (declarado por chamada ao hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " status do cpufreq: " + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Uso: cpufreq-info [opções]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Opções:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Mostra informação de debug\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Obtem a frequência na qual o CPU roda no momento, de " +"acordo\n" +" com o núcleo do cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Obtem a frequência na qual o CPU está operando no " +"momento,\n" +" através de leitura no hardware (disponÃvel somente " +"para root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Determina a frequência mÃnima e máxima do CPU " +"permitida *\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr "" +" -d, --driver Determina o driver do kernel do cpufreq usado *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr "" +"--p, --policy Obtem a polÃtica do cpufreq em uso no momento *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr "" +" -g, --governors Determina reguladores do cpufreq disponÃveis *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Determina quais CPUs rodam na mesma frequência de " +"hardware *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Determina quais CPUs precisam ter suas frequências\n" +" coordenadas por software *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Mostra estatÃsticas do cpufreq se disponÃveis\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Determina a latência máxima nas trocas de frequência " +"do CPU *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Mostra informação do tipo provida pela interface /" +"proc/cpufreq\n" +" em kernels 2.4. e mais recentes 2.6\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human saÃda legÃvel para humanos para os parâmetros -f, -w, " +"-s e -y\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Imprime essa tela\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Se nenhum argumento ou somente o parâmetro -c, --cpu é dado, informação de " +"debug sobre\n" +"o cpufreq é mostrada, o que é útil por exemplo para reportar bugs.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n" +"equivalente a setá-lo como zero\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "" +"O argumento usado pra essa ferramenta não pode ser combinado com um " +"argumento --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Você não pode especificar mais do que um parâmetro --cpu e/ou\n" +"mais do que um argumento de saÃda especÃfico\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "argumento inválido ou desconhecido\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "" +"não foi possÃvel analisar o CPU % já que o mesmo parece não estar presente\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analisando o CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Uso: cpufreq-set [opções]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ nova frequência mÃnima do CPU que o regulador " +"deve selecionar\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ nova frequência máxima do CPU que o regulador " +"deve escolher\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV novo regulador do cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ frequência especÃfica para ser setada. Necessita " +"que o regulador em\n" +" nÃvel de usuário esteja disponÃvel e carregado\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Modifica todos os CPUs relacionados ao hardware\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Mostra essa tela\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n" +"equivalente a setá-lo como zero\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Notas:\n" +"1. Omitir o argumento -c or --cpu é equivalente a setá-lo como zero\n" +"2. O parâmetro -f FREQ, --freq FREQ não pode ser combinado com qualquer " +"outro parâmetro\n" +" exceto com o parâmetro -c CPU, --cpu CPU\n" +"3. FREQuências podem ser usadas em Hz, kHz (padrão), MHz, GHz, o THz\n" +" colocando o nome desejado da unidade após o valor, sem qualquer espaço\n" +" (FREQuência em kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Erro ao setar novos valores. Erros comuns:\n" +"- Você tem direitos administrativos necessários? (super-usuário?)\n" +"- O regulador que você requesitou está disponÃvel e foi \"modprobed\"?\n" +"- Tentando setar uma polÃtica inválida?\n" +"- Tentando setar uma frequência especÃfica, mas o regulador em nÃvel de " +"usuário não está disponÃvel,\n" +" por exemplo devido ao hardware que não pode ser setado pra uma frequência " +"especÃfica\n" +" ou porque o regulador em nÃvel de usuário não foi carregado?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU errado, desconhecido ou inesperado?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"o parâmetro -f/--freq não pode ser combinado com os parâmetros -d/--min, -" +"u/--max ou\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Pelo menos um parâmetro entre -f/--freq, -d/--min, -u/--max, e\n" +"-g/--governor deve ser usado\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +"--p, --policy Obtem a polÃtica do cpufreq em uso no momento *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analisando o CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " nÃveis de frequência disponÃveis: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " driver: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " maior latência de transição: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Uso: cpufreq-info [opções]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Mostra informação de debug\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Mostra informação do tipo provida pela interface /" +"proc/cpufreq\n" +" em kernels 2.4. e mais recentes 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Você não pode especificar mais do que um parâmetro --cpu e/ou\n" +"mais do que um argumento de saÃda especÃfico\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU número do CPU sobre o qual as inforções devem ser " +#~ "determinadas\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU número do CPU onde as configurações do cpufreq " +#~ "vão ser modificadas\n" diff --git a/tools/power/cpupower/utils/builtin.h b/tools/power/cpupower/utils/builtin.h new file mode 100644 index 0000000..c870ffb --- /dev/null +++ b/tools/power/cpupower/utils/builtin.h @@ -0,0 +1,18 @@ +#ifndef BUILTIN_H +#define BUILTIN_H + +extern int cmd_set(int argc, const char **argv); +extern int cmd_info(int argc, const char **argv); +extern int cmd_freq_set(int argc, const char **argv); +extern int cmd_freq_info(int argc, const char **argv); +extern int cmd_idle_info(int argc, const char **argv); +extern int cmd_monitor(int argc, const char **argv); + +extern void set_help(void); +extern void info_help(void); +extern void freq_set_help(void); +extern void freq_info_help(void); +extern void idle_info_help(void); +extern void monitor_help(void); + +#endif diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c new file mode 100644 index 0000000..5a1d25f --- /dev/null +++ b/tools/power/cpupower/utils/cpufreq-info.c @@ -0,0 +1,708 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> + +#include <getopt.h> + +#include "cpufreq.h" +#include "helpers/helpers.h" +#include "helpers/bitmask.h" + +#define LINE_LEN 10 + +static unsigned int count_cpus(void) +{ + FILE *fp; + char value[LINE_LEN]; + unsigned int ret = 0; + unsigned int cpunr = 0; + + fp = fopen("/proc/stat", "r"); + if (!fp) { + printf(_("Couldn't count the number of CPUs (%s: %s), assuming 1\n"), "/proc/stat", strerror(errno)); + return 1; + } + + while (!feof(fp)) { + if (!fgets(value, LINE_LEN, fp)) + continue; + value[LINE_LEN - 1] = '\0'; + if (strlen(value) < (LINE_LEN - 2)) + continue; + if (strstr(value, "cpu ")) + continue; + if (sscanf(value, "cpu%d ", &cpunr) != 1) + continue; + if (cpunr > ret) + ret = cpunr; + } + fclose(fp); + + /* cpu count starts from 0, on error return 1 (UP) */ + return ret + 1; +} + + +static void proc_cpufreq_output(void) +{ + unsigned int cpu, nr_cpus; + struct cpufreq_policy *policy; + unsigned int min_pctg = 0; + unsigned int max_pctg = 0; + unsigned long min, max; + + printf(_(" minimum CPU frequency - maximum CPU frequency - governor\n")); + + nr_cpus = count_cpus(); + for (cpu = 0; cpu < nr_cpus; cpu++) { + policy = cpufreq_get_policy(cpu); + if (!policy) + continue; + + if (cpufreq_get_hardware_limits(cpu, &min, &max)) { + max = 0; + } else { + min_pctg = (policy->min * 100) / max; + max_pctg = (policy->max * 100) / max; + } + printf("CPU%3d %9lu kHz (%3d %%) - %9lu kHz (%3d %%) - %s\n", + cpu , policy->min, max ? min_pctg : 0, policy->max, + max ? max_pctg : 0, policy->governor); + + cpufreq_put_policy(policy); + } +} + +static void print_speed(unsigned long speed) +{ + unsigned long tmp; + + if (speed > 1000000) { + tmp = speed % 10000; + if (tmp >= 5000) + speed += 10000; + printf("%u.%02u GHz", ((unsigned int) speed/1000000), + ((unsigned int) (speed%1000000)/10000)); + } else if (speed > 100000) { + tmp = speed % 1000; + if (tmp >= 500) + speed += 1000; + printf("%u MHz", ((unsigned int) speed / 1000)); + } else if (speed > 1000) { + tmp = speed % 100; + if (tmp >= 50) + speed += 100; + printf("%u.%01u MHz", ((unsigned int) speed/1000), + ((unsigned int) (speed%1000)/100)); + } else + printf("%lu kHz", speed); + + return; +} + +static void print_duration(unsigned long duration) +{ + unsigned long tmp; + + if (duration > 1000000) { + tmp = duration % 10000; + if (tmp >= 5000) + duration += 10000; + printf("%u.%02u ms", ((unsigned int) duration/1000000), + ((unsigned int) (duration%1000000)/10000)); + } else if (duration > 100000) { + tmp = duration % 1000; + if (tmp >= 500) + duration += 1000; + printf("%u us", ((unsigned int) duration / 1000)); + } else if (duration > 1000) { + tmp = duration % 100; + if (tmp >= 50) + duration += 100; + printf("%u.%01u us", ((unsigned int) duration/1000), + ((unsigned int) (duration%1000)/100)); + } else + printf("%lu ns", duration); + + return; +} + +/* --boost / -b */ + +static int get_boost_mode(unsigned int cpu) +{ + int support, active, b_states = 0, ret, pstate_no, i; + /* ToDo: Make this more global */ + unsigned long pstates[MAX_HW_PSTATES] = {0,}; + + if (cpupower_cpu_info.vendor != X86_VENDOR_AMD && + cpupower_cpu_info.vendor != X86_VENDOR_INTEL) + return 0; + + ret = cpufreq_has_boost_support(cpu, &support, &active, &b_states); + if (ret) { + printf(_("Error while evaluating Boost Capabilities" + " on CPU %d -- are you root?\n"), cpu); + return ret; + } + /* P state changes via MSR are identified via cpuid 80000007 + on Intel and AMD, but we assume boost capable machines can do that + if (cpuid_eax(0x80000000) >= 0x80000007 + && (cpuid_edx(0x80000007) & (1 << 7))) + */ + + printf(_(" boost state support:\n")); + + printf(_(" Supported: %s\n"), support ? _("yes") : _("no")); + printf(_(" Active: %s\n"), active ? _("yes") : _("no")); + + if (cpupower_cpu_info.vendor == X86_VENDOR_AMD && + cpupower_cpu_info.family >= 0x10) { + ret = decode_pstates(cpu, cpupower_cpu_info.family, b_states, + pstates, &pstate_no); + if (ret) + return ret; + + printf(_(" Boost States: %d\n"), b_states); + printf(_(" Total States: %d\n"), pstate_no); + for (i = 0; i < pstate_no; i++) { + if (i < b_states) + printf(_(" Pstate-Pb%d: %luMHz (boost state)" + "\n"), i, pstates[i]); + else + printf(_(" Pstate-P%d: %luMHz\n"), + i - b_states, pstates[i]); + } + } else if (cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO) { + double bclk; + unsigned long long intel_turbo_ratio = 0; + unsigned int ratio; + + /* Any way to autodetect this ? */ + if (cpupower_cpu_info.caps & CPUPOWER_CAP_IS_SNB) + bclk = 100.00; + else + bclk = 133.33; + intel_turbo_ratio = msr_intel_get_turbo_ratio(cpu); + dprint (" Ratio: 0x%llx - bclk: %f\n", + intel_turbo_ratio, bclk); + + ratio = (intel_turbo_ratio >> 24) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 4 active cores\n"), + ratio * bclk); + + ratio = (intel_turbo_ratio >> 16) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 3 active cores\n"), + ratio * bclk); + + ratio = (intel_turbo_ratio >> 8) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 2 active cores\n"), + ratio * bclk); + + ratio = (intel_turbo_ratio >> 0) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 1 active cores\n"), + ratio * bclk); + } + return 0; +} + +static void debug_output_one(unsigned int cpu) +{ + char *driver; + struct cpufreq_affected_cpus *cpus; + struct cpufreq_available_frequencies *freqs; + unsigned long min, max, freq_kernel, freq_hardware; + unsigned long total_trans, latency; + unsigned long long total_time; + struct cpufreq_policy *policy; + struct cpufreq_available_governors *governors; + struct cpufreq_stats *stats; + + if (cpufreq_cpu_exists(cpu)) + return; + + freq_kernel = cpufreq_get_freq_kernel(cpu); + freq_hardware = cpufreq_get_freq_hardware(cpu); + + driver = cpufreq_get_driver(cpu); + if (!driver) { + printf(_(" no or unknown cpufreq driver is active on this CPU\n")); + } else { + printf(_(" driver: %s\n"), driver); + cpufreq_put_driver(driver); + } + + cpus = cpufreq_get_related_cpus(cpu); + if (cpus) { + printf(_(" CPUs which run at the same hardware frequency: ")); + while (cpus->next) { + printf("%d ", cpus->cpu); + cpus = cpus->next; + } + printf("%d\n", cpus->cpu); + cpufreq_put_related_cpus(cpus); + } + + cpus = cpufreq_get_affected_cpus(cpu); + if (cpus) { + printf(_(" CPUs which need to have their frequency coordinated by software: ")); + while (cpus->next) { + printf("%d ", cpus->cpu); + cpus = cpus->next; + } + printf("%d\n", cpus->cpu); + cpufreq_put_affected_cpus(cpus); + } + + latency = cpufreq_get_transition_latency(cpu); + if (latency) { + printf(_(" maximum transition latency: ")); + print_duration(latency); + printf(".\n"); + } + + if (!(cpufreq_get_hardware_limits(cpu, &min, &max))) { + printf(_(" hardware limits: ")); + print_speed(min); + printf(" - "); + print_speed(max); + printf("\n"); + } + + freqs = cpufreq_get_available_frequencies(cpu); + if (freqs) { + printf(_(" available frequency steps: ")); + while (freqs->next) { + print_speed(freqs->frequency); + printf(", "); + freqs = freqs->next; + } + print_speed(freqs->frequency); + printf("\n"); + cpufreq_put_available_frequencies(freqs); + } + + governors = cpufreq_get_available_governors(cpu); + if (governors) { + printf(_(" available cpufreq governors: ")); + while (governors->next) { + printf("%s, ", governors->governor); + governors = governors->next; + } + printf("%s\n", governors->governor); + cpufreq_put_available_governors(governors); + } + + policy = cpufreq_get_policy(cpu); + if (policy) { + printf(_(" current policy: frequency should be within ")); + print_speed(policy->min); + printf(_(" and ")); + print_speed(policy->max); + + printf(".\n "); + printf(_("The governor \"%s\" may" + " decide which speed to use\n within this range.\n"), + policy->governor); + cpufreq_put_policy(policy); + } + + if (freq_kernel || freq_hardware) { + printf(_(" current CPU frequency is ")); + if (freq_hardware) { + print_speed(freq_hardware); + printf(_(" (asserted by call to hardware)")); + } else + print_speed(freq_kernel); + printf(".\n"); + } + stats = cpufreq_get_stats(cpu, &total_time); + if (stats) { + printf(_(" cpufreq stats: ")); + while (stats) { + print_speed(stats->frequency); + printf(":%.2f%%", (100.0 * stats->time_in_state) / total_time); + stats = stats->next; + if (stats) + printf(", "); + } + cpufreq_put_stats(stats); + total_trans = cpufreq_get_transitions(cpu); + if (total_trans) + printf(" (%lu)\n", total_trans); + else + printf("\n"); + } + get_boost_mode(cpu); + +} + +/* --freq / -f */ + +static int get_freq_kernel(unsigned int cpu, unsigned int human) +{ + unsigned long freq = cpufreq_get_freq_kernel(cpu); + if (!freq) + return -EINVAL; + if (human) { + print_speed(freq); + printf("\n"); + } else + printf("%lu\n", freq); + return 0; +} + + +/* --hwfreq / -w */ + +static int get_freq_hardware(unsigned int cpu, unsigned int human) +{ + unsigned long freq = cpufreq_get_freq_hardware(cpu); + if (!freq) + return -EINVAL; + if (human) { + print_speed(freq); + printf("\n"); + } else + printf("%lu\n", freq); + return 0; +} + +/* --hwlimits / -l */ + +static int get_hardware_limits(unsigned int cpu) +{ + unsigned long min, max; + if (cpufreq_get_hardware_limits(cpu, &min, &max)) + return -EINVAL; + printf("%lu %lu\n", min, max); + return 0; +} + +/* --driver / -d */ + +static int get_driver(unsigned int cpu) +{ + char *driver = cpufreq_get_driver(cpu); + if (!driver) + return -EINVAL; + printf("%s\n", driver); + cpufreq_put_driver(driver); + return 0; +} + +/* --policy / -p */ + +static int get_policy(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_get_policy(cpu); + if (!policy) + return -EINVAL; + printf("%lu %lu %s\n", policy->min, policy->max, policy->governor); + cpufreq_put_policy(policy); + return 0; +} + +/* --governors / -g */ + +static int get_available_governors(unsigned int cpu) +{ + struct cpufreq_available_governors *governors = + cpufreq_get_available_governors(cpu); + if (!governors) + return -EINVAL; + + while (governors->next) { + printf("%s ", governors->governor); + governors = governors->next; + } + printf("%s\n", governors->governor); + cpufreq_put_available_governors(governors); + return 0; +} + + +/* --affected-cpus / -a */ + +static int get_affected_cpus(unsigned int cpu) +{ + struct cpufreq_affected_cpus *cpus = cpufreq_get_affected_cpus(cpu); + if (!cpus) + return -EINVAL; + + while (cpus->next) { + printf("%d ", cpus->cpu); + cpus = cpus->next; + } + printf("%d\n", cpus->cpu); + cpufreq_put_affected_cpus(cpus); + return 0; +} + +/* --related-cpus / -r */ + +static int get_related_cpus(unsigned int cpu) +{ + struct cpufreq_affected_cpus *cpus = cpufreq_get_related_cpus(cpu); + if (!cpus) + return -EINVAL; + + while (cpus->next) { + printf("%d ", cpus->cpu); + cpus = cpus->next; + } + printf("%d\n", cpus->cpu); + cpufreq_put_related_cpus(cpus); + return 0; +} + +/* --stats / -s */ + +static int get_freq_stats(unsigned int cpu, unsigned int human) +{ + unsigned long total_trans = cpufreq_get_transitions(cpu); + unsigned long long total_time; + struct cpufreq_stats *stats = cpufreq_get_stats(cpu, &total_time); + while (stats) { + if (human) { + print_speed(stats->frequency); + printf(":%.2f%%", + (100.0 * stats->time_in_state) / total_time); + } else + printf("%lu:%llu", + stats->frequency, stats->time_in_state); + stats = stats->next; + if (stats) + printf(", "); + } + cpufreq_put_stats(stats); + if (total_trans) + printf(" (%lu)\n", total_trans); + return 0; +} + +/* --latency / -y */ + +static int get_latency(unsigned int cpu, unsigned int human) +{ + unsigned long latency = cpufreq_get_transition_latency(cpu); + if (!latency) + return -EINVAL; + + if (human) { + print_duration(latency); + printf("\n"); + } else + printf("%lu\n", latency); + return 0; +} + +void freq_info_help(void) +{ + printf(_("Usage: cpupower freqinfo [options]\n")); + printf(_("Options:\n")); + printf(_(" -e, --debug Prints out debug information [default]\n")); + printf(_(" -f, --freq Get frequency the CPU currently runs at, according\n" + " to the cpufreq core *\n")); + printf(_(" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" + " it from hardware (only available to root) *\n")); + printf(_(" -l, --hwlimits Determine the minimum and maximum CPU frequency allowed *\n")); + printf(_(" -d, --driver Determines the used cpufreq kernel driver *\n")); + printf(_(" -p, --policy Gets the currently used cpufreq policy *\n")); + printf(_(" -g, --governors Determines available cpufreq governors *\n")); + printf(_(" -r, --related-cpus Determines which CPUs run at the same hardware frequency *\n")); + printf(_(" -a, --affected-cpus Determines which CPUs need to have their frequency\n" + " coordinated by software *\n")); + printf(_(" -s, --stats Shows cpufreq statistics if available\n")); + printf(_(" -y, --latency Determines the maximum latency on CPU frequency changes *\n")); + printf(_(" -b, --boost Checks for turbo or boost modes *\n")); + printf(_(" -o, --proc Prints out information like provided by the /proc/cpufreq\n" + " interface in 2.4. and early 2.6. kernels\n")); + printf(_(" -m, --human human-readable output for the -f, -w, -s and -y parameters\n")); + printf(_(" -h, --help Prints out this screen\n")); + + printf("\n"); + printf(_("If no argument is given, full output about\n" + "cpufreq is printed which is useful e.g. for reporting bugs.\n\n")); + printf(_("By default info of CPU 0 is shown which can be overridden\n" + "with the cpupower --cpu main command option.\n")); +} + +static struct option info_opts[] = { + { .name = "debug", .has_arg = no_argument, .flag = NULL, .val = 'e'}, + { .name = "boost", .has_arg = no_argument, .flag = NULL, .val = 'b'}, + { .name = "freq", .has_arg = no_argument, .flag = NULL, .val = 'f'}, + { .name = "hwfreq", .has_arg = no_argument, .flag = NULL, .val = 'w'}, + { .name = "hwlimits", .has_arg = no_argument, .flag = NULL, .val = 'l'}, + { .name = "driver", .has_arg = no_argument, .flag = NULL, .val = 'd'}, + { .name = "policy", .has_arg = no_argument, .flag = NULL, .val = 'p'}, + { .name = "governors", .has_arg = no_argument, .flag = NULL, .val = 'g'}, + { .name = "related-cpus", .has_arg = no_argument, .flag = NULL, .val = 'r'}, + { .name = "affected-cpus",.has_arg = no_argument, .flag = NULL, .val = 'a'}, + { .name = "stats", .has_arg = no_argument, .flag = NULL, .val = 's'}, + { .name = "latency", .has_arg = no_argument, .flag = NULL, .val = 'y'}, + { .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'}, + { .name = "human", .has_arg = no_argument, .flag = NULL, .val = 'm'}, + { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, + { }, +}; + +int cmd_freq_info(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1; + unsigned int cpu = 0; + unsigned int human = 0; + int output_param = 0; + + do { + ret = getopt_long(argc, argv, "hoefwldpgrasmyb", info_opts, NULL); + switch (ret) { + case '?': + output_param = '?'; + cont = 0; + break; + case 'h': + output_param = 'h'; + cont = 0; + break; + case -1: + cont = 0; + break; + case 'b': + case 'o': + case 'a': + case 'r': + case 'g': + case 'p': + case 'd': + case 'l': + case 'w': + case 'f': + case 'e': + case 's': + case 'y': + if (output_param) { + output_param = -1; + cont = 0; + break; + } + output_param = ret; + break; + case 'm': + if (human) { + output_param = -1; + cont = 0; + break; + } + human = 1; + break; + default: + fprintf(stderr, "invalid or unknown argument\n"); + return EXIT_FAILURE; + } + } while (cont); + + switch (output_param) { + case 'o': + if (!bitmask_isallclear(cpus_chosen)) { + printf(_("The argument passed to this tool can't be " + "combined with passing a --cpu argument\n")); + return -EINVAL; + } + break; + case 0: + output_param = 'e'; + } + + ret = 0; + + /* Default is: show output of CPU 0 only */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setbit(cpus_chosen, 0); + + switch (output_param) { + case -1: + printf(_("You can't specify more than one --cpu parameter and/or\n" + "more than one output-specific argument\n")); + return -EINVAL; + case '?': + printf(_("invalid or unknown argument\n")); + freq_info_help(); + return -EINVAL; + case 'h': + freq_info_help(); + return EXIT_SUCCESS; + case 'o': + proc_cpufreq_output(); + return EXIT_SUCCESS; + } + + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu)) + continue; + if (cpufreq_cpu_exists(cpu)) { + printf(_("couldn't analyze CPU %d as it doesn't seem to be present\n"), cpu); + continue; + } + printf(_("analyzing CPU %d:\n"), cpu); + + switch (output_param) { + case 'b': + get_boost_mode(cpu); + break; + case 'e': + debug_output_one(cpu); + break; + case 'a': + ret = get_affected_cpus(cpu); + break; + case 'r': + ret = get_related_cpus(cpu); + break; + case 'g': + ret = get_available_governors(cpu); + break; + case 'p': + ret = get_policy(cpu); + break; + case 'd': + ret = get_driver(cpu); + break; + case 'l': + ret = get_hardware_limits(cpu); + break; + case 'w': + ret = get_freq_hardware(cpu, human); + break; + case 'f': + ret = get_freq_kernel(cpu, human); + break; + case 's': + ret = get_freq_stats(cpu, human); + break; + case 'y': + ret = get_latency(cpu, human); + break; + } + if (ret) + return ret; + } + return ret; +} diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c new file mode 100644 index 0000000..5f78362 --- /dev/null +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -0,0 +1,358 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Licensed under the terms of the GNU GPL License version 2. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <limits.h> +#include <string.h> +#include <ctype.h> + +#include <getopt.h> + +#include "cpufreq.h" +#include "helpers/helpers.h" + +#define NORM_FREQ_LEN 32 + +void freq_set_help(void) +{ + printf(_("Usage: cpupower frequency-set [options]\n")); + printf(_("Options:\n")); + printf(_(" -d FREQ, --min FREQ new minimum CPU frequency the governor may select\n")); + printf(_(" -u FREQ, --max FREQ new maximum CPU frequency the governor may select\n")); + printf(_(" -g GOV, --governor GOV new cpufreq governor\n")); + printf(_(" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" + " governor to be available and loaded\n")); + printf(_(" -r, --related Switches all hardware-related CPUs\n")); + printf(_(" -h, --help Prints out this screen\n")); + printf("\n"); + printf(_("Notes:\n" + "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n")); + printf(_("2. The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter\n" + " except the -c CPU, --cpu CPU parameter\n" + "3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" + " by postfixing the value with the wanted unit name, without any space\n" + " (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n")); + +} + +static struct option set_opts[] = { + { .name = "min", .has_arg = required_argument, .flag = NULL, .val = 'd'}, + { .name = "max", .has_arg = required_argument, .flag = NULL, .val = 'u'}, + { .name = "governor", .has_arg = required_argument, .flag = NULL, .val = 'g'}, + { .name = "freq", .has_arg = required_argument, .flag = NULL, .val = 'f'}, + { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, + { .name = "related", .has_arg = no_argument, .flag = NULL, .val='r'}, + { }, +}; + +static void print_error(void) +{ + printf(_("Error setting new values. Common errors:\n" + "- Do you have proper administration rights? (super-user?)\n" + "- Is the governor you requested available and modprobed?\n" + "- Trying to set an invalid policy?\n" + "- Trying to set a specific frequency, but userspace governor is not available,\n" + " for example because of hardware which cannot be set to a specific frequency\n" + " or because the userspace governor isn't loaded?\n")); +}; + +struct freq_units { + char *str_unit; + int power_of_ten; +}; + +const struct freq_units def_units[] = { + {"hz", -3}, + {"khz", 0}, /* default */ + {"mhz", 3}, + {"ghz", 6}, + {"thz", 9}, + {NULL, 0} +}; + +static void print_unknown_arg(void) +{ + printf(_("invalid or unknown argument\n")); + freq_set_help(); +} + +static unsigned long string_to_frequency(const char *str) +{ + char normalized[NORM_FREQ_LEN]; + const struct freq_units *unit; + const char *scan; + char *end; + unsigned long freq; + int power = 0, match_count = 0, i, cp, pad; + + while (*str == '0') + str++; + + for (scan = str; isdigit(*scan) || *scan == '.'; scan++) { + if (*scan == '.' && match_count == 0) + match_count = 1; + else if (*scan == '.' && match_count == 1) + return 0; + } + + if (*scan) { + match_count = 0; + for (unit = def_units; unit->str_unit; unit++) { + for (i = 0; + scan[i] && tolower(scan[i]) == unit->str_unit[i]; + ++i) + continue; + if (scan[i]) + continue; + match_count++; + power = unit->power_of_ten; + } + if (match_count != 1) + return 0; + } + + /* count the number of digits to be copied */ + for (cp = 0; isdigit(str[cp]); cp++) + continue; + + if (str[cp] == '.') { + while (power > -1 && isdigit(str[cp+1])) + cp++, power--; + } + if (power >= -1) /* not enough => pad */ + pad = power + 1; + else /* to much => strip */ + pad = 0, cp += power + 1; + /* check bounds */ + if (cp <= 0 || cp + pad > NORM_FREQ_LEN - 1) + return 0; + + /* copy digits */ + for (i = 0; i < cp; i++, str++) { + if (*str == '.') + str++; + normalized[i] = *str; + } + /* and pad */ + for (; i < cp + pad; i++) + normalized[i] = '0'; + + /* round up, down ? */ + match_count = (normalized[i-1] >= '5'); + /* and drop the decimal part */ + normalized[i-1] = 0; /* cp > 0 && pad >= 0 ==> i > 0 */ + + /* final conversion (and applying rounding) */ + errno = 0; + freq = strtoul(normalized, &end, 10); + if (errno) + return 0; + else { + if (match_count && freq != ULONG_MAX) + freq++; + return freq; + } +} + +static int do_new_policy(unsigned int cpu, struct cpufreq_policy *new_pol) +{ + struct cpufreq_policy *cur_pol = cpufreq_get_policy(cpu); + int ret; + + if (!cur_pol) { + printf(_("wrong, unknown or unhandled CPU?\n")); + return -EINVAL; + } + + if (!new_pol->min) + new_pol->min = cur_pol->min; + + if (!new_pol->max) + new_pol->max = cur_pol->max; + + if (!new_pol->governor) + new_pol->governor = cur_pol->governor; + + ret = cpufreq_set_policy(cpu, new_pol); + + cpufreq_put_policy(cur_pol); + + return ret; +} + + +static int do_one_cpu(unsigned int cpu, struct cpufreq_policy *new_pol, + unsigned long freq, unsigned int pc) +{ + switch (pc) { + case 0: + return cpufreq_set_frequency(cpu, freq); + + case 1: + /* if only one value of a policy is to be changed, we can + * use a "fast path". + */ + if (new_pol->min) + return cpufreq_modify_policy_min(cpu, new_pol->min); + else if (new_pol->max) + return cpufreq_modify_policy_max(cpu, new_pol->max); + else if (new_pol->governor) + return cpufreq_modify_policy_governor(cpu, + new_pol->governor); + + default: + /* slow path */ + return do_new_policy(cpu, new_pol); + } +} + +int cmd_freq_set(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1; + int double_parm = 0, related = 0, policychange = 0; + unsigned long freq = 0; + char gov[20]; + unsigned int cpu; + + struct cpufreq_policy new_pol = { + .min = 0, + .max = 0, + .governor = NULL, + }; + + /* parameter parsing */ + do { + ret = getopt_long(argc, argv, "d:u:g:f:hr", set_opts, NULL); + switch (ret) { + case '?': + print_unknown_arg(); + return -EINVAL; + case 'h': + freq_set_help(); + return 0; + case -1: + cont = 0; + break; + case 'r': + if (related) + double_parm++; + related++; + break; + case 'd': + if (new_pol.min) + double_parm++; + policychange++; + new_pol.min = string_to_frequency(optarg); + if (new_pol.min == 0) { + print_unknown_arg(); + return -EINVAL; + } + break; + case 'u': + if (new_pol.max) + double_parm++; + policychange++; + new_pol.max = string_to_frequency(optarg); + if (new_pol.max == 0) { + print_unknown_arg(); + return -EINVAL; + } + break; + case 'f': + if (freq) + double_parm++; + freq = string_to_frequency(optarg); + if (freq == 0) { + print_unknown_arg(); + return -EINVAL; + } + break; + case 'g': + if (new_pol.governor) + double_parm++; + policychange++; + if ((strlen(optarg) < 3) || (strlen(optarg) > 18)) { + print_unknown_arg(); + return -EINVAL; + } + if ((sscanf(optarg, "%s", gov)) != 1) { + print_unknown_arg(); + return -EINVAL; + } + new_pol.governor = gov; + break; + } + } while (cont); + + /* parameter checking */ + if (double_parm) { + printf("the same parameter was passed more than once\n"); + return -EINVAL; + } + + if (freq && policychange) { + printf(_("the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" + "-g/--governor parameters\n")); + return -EINVAL; + } + + if (!freq && !policychange) { + printf(_("At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" + "-g/--governor must be passed\n")); + return -EINVAL; + } + + /* Default is: set all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + + /* Also set frequency settings for related CPUs if -r is passed */ + if (related) { + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + struct cpufreq_affected_cpus *cpus; + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpufreq_cpu_exists(cpu)) + continue; + + cpus = cpufreq_get_related_cpus(cpu); + if (!cpus) + break; + while (cpus->next) { + bitmask_setbit(cpus_chosen, cpus->cpu); + cpus = cpus->next; + } + cpufreq_put_related_cpus(cpus); + } + } + + + /* loop over CPUs */ + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpufreq_cpu_exists(cpu)) + continue; + + printf(_("Setting cpu: %d\n"), cpu); + ret = do_one_cpu(cpu, &new_pol, freq, policychange); + if (ret) + break; + } + + if (ret) + print_error(); + + return ret; +} diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c new file mode 100644 index 0000000..70da357 --- /dev/null +++ b/tools/power/cpupower/utils/cpuidle-info.c @@ -0,0 +1,244 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * (C) 2010 Thomas Renninger <trenn@suse.de> + * + * Licensed under the terms of the GNU GPL License version 2. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <getopt.h> +#include <cpufreq.h> + +#include "helpers/helpers.h" +#include "helpers/sysfs.h" +#include "helpers/bitmask.h" + +#define LINE_LEN 10 + +static void cpuidle_cpu_output(unsigned int cpu, int verbose) +{ + int idlestates, idlestate; + char *tmp; + + printf(_ ("Analyzing CPU %d:\n"), cpu); + + idlestates = sysfs_get_idlestate_count(cpu); + if (idlestates == 0) { + printf(_("CPU %u: No idle states\n"), cpu); + return; + } else if (idlestates <= 0) { + printf(_("CPU %u: Can't read idle state info\n"), cpu); + return; + } + tmp = sysfs_get_idlestate_name(cpu, idlestates - 1); + if (!tmp) { + printf(_("Could not determine max idle state %u\n"), + idlestates - 1); + return; + } + + printf(_("Number of idle states: %d\n"), idlestates); + + printf(_("Available idle states:")); + for (idlestate = 1; idlestate < idlestates; idlestate++) { + tmp = sysfs_get_idlestate_name(cpu, idlestate); + if (!tmp) + continue; + printf(" %s", tmp); + free(tmp); + } + printf("\n"); + + if (!verbose) + return; + + for (idlestate = 1; idlestate < idlestates; idlestate++) { + tmp = sysfs_get_idlestate_name(cpu, idlestate); + if (!tmp) + continue; + printf("%s:\n", tmp); + free(tmp); + + tmp = sysfs_get_idlestate_desc(cpu, idlestate); + if (!tmp) + continue; + printf(_("Flags/Description: %s\n"), tmp); + free(tmp); + + printf(_("Latency: %lu\n"), + sysfs_get_idlestate_latency(cpu, idlestate)); + printf(_("Usage: %lu\n"), + sysfs_get_idlestate_usage(cpu, idlestate)); + printf(_("Duration: %llu\n"), + sysfs_get_idlestate_time(cpu, idlestate)); + } + printf("\n"); +} + +static void cpuidle_general_output(void) +{ + char *tmp; + + tmp = sysfs_get_cpuidle_driver(); + if (!tmp) { + printf(_("Could not determine cpuidle driver\n")); + return; + } + + printf(_("CPUidle driver: %s\n"), tmp); + free(tmp); + + tmp = sysfs_get_cpuidle_governor(); + if (!tmp) { + printf(_("Could not determine cpuidle governor\n")); + return; + } + + printf(_("CPUidle governor: %s\n"), tmp); + free(tmp); +} + +static void proc_cpuidle_cpu_output(unsigned int cpu) +{ + long max_allowed_cstate = 2000000000; + int cstates, cstate; + + cstates = sysfs_get_idlestate_count(cpu); + if (cstates == 0) { + /* + * Go on and print same useless info as you'd see with + * cat /proc/acpi/processor/../power + * printf(_("CPU %u: No C-states available\n"), cpu); + * return; + */ + } else if (cstates <= 0) { + printf(_("CPU %u: Can't read C-state info\n"), cpu); + return; + } + /* printf("Cstates: %d\n", cstates); */ + + printf(_("active state: C0\n")); + printf(_("max_cstate: C%u\n"), cstates-1); + printf(_("maximum allowed latency: %lu usec\n"), max_allowed_cstate); + printf(_("states:\t\n")); + for (cstate = 1; cstate < cstates; cstate++) { + printf(_(" C%d: " + "type[C%d] "), cstate, cstate); + printf(_("promotion[--] demotion[--] ")); + printf(_("latency[%03lu] "), + sysfs_get_idlestate_latency(cpu, cstate)); + printf(_("usage[%08lu] "), + sysfs_get_idlestate_usage(cpu, cstate)); + printf(_("duration[%020Lu] \n"), + sysfs_get_idlestate_time(cpu, cstate)); + } +} + +/* --freq / -f */ + +void idle_info_help(void) +{ + printf(_ ("Usage: cpupower idleinfo [options]\n")); + printf(_ ("Options:\n")); + printf(_ (" -s, --silent Only show general C-state information\n")); + printf(_ (" -o, --proc Prints out information like provided by the /proc/acpi/processor/*/power\n" + " interface in older kernels\n")); + printf(_ (" -h, --help Prints out this screen\n")); + + printf("\n"); +} + +static struct option info_opts[] = { + { .name = "silent", .has_arg = no_argument, .flag = NULL, .val = 's'}, + { .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'}, + { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, + { }, +}; + +static inline void cpuidle_exit(int fail) +{ + idle_info_help(); + exit(EXIT_FAILURE); +} + +int cmd_idle_info(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1, output_param = 0, verbose = 1; + unsigned int cpu = 0; + + do { + ret = getopt_long(argc, argv, "hos", info_opts, NULL); + if (ret == -1) + break; + switch (ret) { + case '?': + output_param = '?'; + cont = 0; + break; + case 'h': + output_param = 'h'; + cont = 0; + break; + case 's': + verbose = 0; + break; + case -1: + cont = 0; + break; + case 'o': + if (output_param) { + output_param = -1; + cont = 0; + break; + } + output_param = ret; + break; + } + } while (cont); + + switch (output_param) { + case -1: + printf(_("You can't specify more than one " + "output-specific argument\n")); + cpuidle_exit(EXIT_FAILURE); + case '?': + printf(_("invalid or unknown argument\n")); + cpuidle_exit(EXIT_FAILURE); + case 'h': + cpuidle_exit(EXIT_SUCCESS); + } + + /* Default is: show output of CPU 0 only */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setbit(cpus_chosen, 0); + + if (output_param == 0) + cpuidle_general_output(); + + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpufreq_cpu_exists(cpu)) + continue; + + switch (output_param) { + + case 'o': + proc_cpuidle_cpu_output(cpu); + break; + case 0: + printf("\n"); + cpuidle_cpu_output(cpu, verbose); + break; + } + } + return EXIT_SUCCESS; +} diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c new file mode 100644 index 0000000..85253cb --- /dev/null +++ b/tools/power/cpupower/utils/cpupower-info.c @@ -0,0 +1,153 @@ +/* + * (C) 2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <errno.h> +#include <string.h> +#include <getopt.h> + +#include <cpufreq.h> +#include "helpers/helpers.h" +#include "helpers/sysfs.h" + +void info_help(void) +{ + printf(_("Usage: cpupower info [ -b ] [ -m ] [ -s ]\n")); + printf(_("Options:\n")); + printf(_(" -b, --perf-bias Gets CPU's power vs performance policy on some\n" + " Intel models [0-15], see manpage for details\n")); + printf(_(" -m, --sched-mc Gets the kernel's multi core scheduler policy.\n")); + printf(_(" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n")); + printf(_(" -h, --help Prints out this screen\n")); + printf(_("\nPassing no option will show all info, by default only on core 0\n")); + printf("\n"); +} + +static struct option set_opts[] = { + { .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'}, + { .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'}, + { .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'}, + { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, + { }, +}; + +static void print_wrong_arg_exit(void) +{ + printf(_("invalid or unknown argument\n")); + info_help(); + exit(EXIT_FAILURE); +} + +int cmd_info(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + unsigned int cpu; + + union { + struct { + int sched_mc:1; + int sched_smt:1; + int perf_bias:1; + }; + int params; + } params = {}; + int ret = 0; + + setlocale(LC_ALL, ""); + textdomain(PACKAGE); + + /* parameter parsing */ + while ((ret = getopt_long(argc, argv, "msbh", set_opts, NULL)) != -1) { + switch (ret) { + case 'h': + info_help(); + return 0; + case 'b': + if (params.perf_bias) + print_wrong_arg_exit(); + params.perf_bias = 1; + break; + case 'm': + if (params.sched_mc) + print_wrong_arg_exit(); + params.sched_mc = 1; + break; + case 's': + if (params.sched_smt) + print_wrong_arg_exit(); + params.sched_smt = 1; + break; + default: + print_wrong_arg_exit(); + } + }; + + if (!params.params) + params.params = 0x7; + + /* Default is: show output of CPU 0 only */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setbit(cpus_chosen, 0); + + if (params.sched_mc) { + ret = sysfs_get_sched("mc"); + printf(_("System's multi core scheduler setting: ")); + if (ret < 0) + /* if sysfs file is missing it's: errno == ENOENT */ + printf(_("not supported\n")); + else + printf("%d\n", ret); + } + if (params.sched_smt) { + ret = sysfs_get_sched("smt"); + printf(_("System's thread sibling scheduler setting: ")); + if (ret < 0) + /* if sysfs file is missing it's: errno == ENOENT */ + printf(_("not supported\n")); + else + printf("%d\n", ret); + } + + /* Add more per cpu options here */ + if (!params.perf_bias) + return ret; + + if (params.perf_bias) { + if (!run_as_root) { + params.perf_bias = 0; + printf(_("Intel's performance bias setting needs root privileges\n")); + } else if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) { + printf(_("System does not support Intel's performance" + " bias setting\n")); + params.perf_bias = 0; + } + } + + /* loop over CPUs */ + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpufreq_cpu_exists(cpu)) + continue; + + printf(_("analyzing CPU %d:\n"), cpu); + + if (params.perf_bias) { + ret = msr_intel_get_perf_bias(cpu); + if (ret < 0) { + printf(_("Could not read perf-bias value\n")); + break; + } else + printf(_("perf-bias: %d\n"), ret); + } + } + return ret; +} diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c new file mode 100644 index 0000000..bc1b391 --- /dev/null +++ b/tools/power/cpupower/utils/cpupower-set.c @@ -0,0 +1,153 @@ +/* + * (C) 2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <errno.h> +#include <string.h> +#include <getopt.h> + +#include <cpufreq.h> +#include "helpers/helpers.h" +#include "helpers/sysfs.h" +#include "helpers/bitmask.h" + +void set_help(void) +{ + printf(_("Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n")); + printf(_("Options:\n")); + printf(_(" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" + " Intel models [0-15], see manpage for details\n")); + printf(_(" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n")); + printf(_(" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler policy.\n")); + printf(_(" -h, --help Prints out this screen\n")); + printf("\n"); +} + +static struct option set_opts[] = { + { .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'}, + { .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'}, + { .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'}, + { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, + { }, +}; + +static void print_wrong_arg_exit(void) +{ + printf(_("invalid or unknown argument\n")); + set_help(); + exit(EXIT_FAILURE); +} + +int cmd_set(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + unsigned int cpu; + + union { + struct { + int sched_mc:1; + int sched_smt:1; + int perf_bias:1; + }; + int params; + } params; + int sched_mc = 0, sched_smt = 0, perf_bias = 0; + int ret = 0; + + setlocale(LC_ALL, ""); + textdomain(PACKAGE); + + params.params = 0; + /* parameter parsing */ + while ((ret = getopt_long(argc, argv, "m:s:b:h", + set_opts, NULL)) != -1) { + switch (ret) { + case 'h': + set_help(); + return 0; + case 'b': + if (params.perf_bias) + print_wrong_arg_exit(); + perf_bias = atoi(optarg); + if (perf_bias < 0 || perf_bias > 15) { + printf(_("--perf-bias param out " + "of range [0-%d]\n"), 15); + print_wrong_arg_exit(); + } + params.perf_bias = 1; + break; + case 'm': + if (params.sched_mc) + print_wrong_arg_exit(); + sched_mc = atoi(optarg); + if (sched_mc < 0 || sched_mc > 2) { + printf(_("--sched-mc param out " + "of range [0-%d]\n"), 2); + print_wrong_arg_exit(); + } + params.sched_mc = 1; + break; + case 's': + if (params.sched_smt) + print_wrong_arg_exit(); + sched_smt = atoi(optarg); + if (sched_smt < 0 || sched_smt > 2) { + printf(_("--sched-smt param out " + "of range [0-%d]\n"), 2); + print_wrong_arg_exit(); + } + params.sched_smt = 1; + break; + default: + print_wrong_arg_exit(); + } + }; + + if (!params.params) { + set_help(); + return -EINVAL; + } + + if (params.sched_mc) { + ret = sysfs_set_sched("mc", sched_mc); + if (ret) + fprintf(stderr, _("Error setting sched-mc %s\n"), + (ret == -ENODEV) ? "not supported" : ""); + } + if (params.sched_smt) { + ret = sysfs_set_sched("smt", sched_smt); + if (ret) + fprintf(stderr, _("Error setting sched-smt %s\n"), + (ret == -ENODEV) ? "not supported" : ""); + } + + /* Default is: set all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + + /* loop over CPUs */ + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpufreq_cpu_exists(cpu)) + continue; + + if (params.perf_bias) { + ret = msr_intel_set_perf_bias(cpu, perf_bias); + if (ret) { + fprintf(stderr, _("Error setting perf-bias " + "value on CPU %d\n"), cpu); + break; + } + } + } + return ret; +} diff --git a/tools/power/cpupower/utils/cpupower.c b/tools/power/cpupower/utils/cpupower.c new file mode 100644 index 0000000..5844ae0 --- /dev/null +++ b/tools/power/cpupower/utils/cpupower.c @@ -0,0 +1,203 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Ideas taken over from the perf userspace tool (included in the Linus + * kernel git repo): subcommand builtins and param parsing. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include "builtin.h" +#include "helpers/helpers.h" +#include "helpers/bitmask.h" + +struct cmd_struct { + const char *cmd; + int (*main)(int, const char **); + void (*usage)(void); + int needs_root; +}; + +#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) + +int cmd_help(int argc, const char **argv); + +/* Global cpu_info object available for all binaries + * Info only retrieved from CPU 0 + * + * Values will be zero/unknown on non X86 archs + */ +struct cpupower_cpu_info cpupower_cpu_info; +int run_as_root; +/* Affected cpus chosen by -c/--cpu param */ +struct bitmask *cpus_chosen; + +#ifdef DEBUG +int be_verbose; +#endif + +static void print_help(void); + +static struct cmd_struct commands[] = { + { "frequency-info", cmd_freq_info, freq_info_help, 0 }, + { "frequency-set", cmd_freq_set, freq_set_help, 1 }, + { "idle-info", cmd_idle_info, idle_info_help, 0 }, + { "set", cmd_set, set_help, 1 }, + { "info", cmd_info, info_help, 0 }, + { "monitor", cmd_monitor, monitor_help, 0 }, + { "help", cmd_help, print_help, 0 }, + /* { "bench", cmd_bench, NULL, 1 }, */ +}; + +int cmd_help(int argc, const char **argv) +{ + unsigned int i; + + if (argc > 1) { + for (i = 0; i < ARRAY_SIZE(commands); i++) { + struct cmd_struct *p = commands + i; + if (strcmp(p->cmd, argv[1])) + continue; + if (p->usage) { + p->usage(); + return EXIT_SUCCESS; + } + } + } + print_help(); + if (argc == 1) + return EXIT_SUCCESS; /* cpupower help */ + return EXIT_FAILURE; +} + +static void print_help(void) +{ + unsigned int i; + +#ifdef DEBUG + printf(_("cpupower [ -d ][ -c cpulist ] subcommand [ARGS]\n")); + printf(_(" -d, --debug May increase output (stderr) on some subcommands\n")); +#else + printf(_("cpupower [ -c cpulist ] subcommand [ARGS]\n")); +#endif + printf(_("cpupower --version\n")); + printf(_("Supported subcommands are:\n")); + for (i = 0; i < ARRAY_SIZE(commands); i++) + printf("\t%s\n", commands[i].cmd); + printf(_("\nSome subcommands can make use of the -c cpulist option.\n")); + printf(_("Look at the general cpupower manpage how to use it\n")); + printf(_("and read up the subcommand's manpage whether it is supported.\n")); + printf(_("\nUse cpupower help subcommand for getting help for above subcommands.\n")); +} + +static void print_version(void) +{ + printf(PACKAGE " " VERSION "\n"); + printf(_("Report errors and bugs to %s, please.\n"), PACKAGE_BUGREPORT); +} + +static void handle_options(int *argc, const char ***argv) +{ + int ret, x, new_argc = 0; + + if (*argc < 1) + return; + + for (x = 0; x < *argc && ((*argv)[x])[0] == '-'; x++) { + const char *param = (*argv)[x]; + if (!strcmp(param, "-h") || !strcmp(param, "--help")) { + print_help(); + exit(EXIT_SUCCESS); + } else if (!strcmp(param, "-c") || !strcmp(param, "--cpu")) { + if (*argc < 2) { + print_help(); + exit(EXIT_FAILURE); + } + if (!strcmp((*argv)[x+1], "all")) + bitmask_setall(cpus_chosen); + else { + ret = bitmask_parselist( + (*argv)[x+1], cpus_chosen); + if (ret < 0) { + fprintf(stderr, _("Error parsing cpu " + "list\n")); + exit(EXIT_FAILURE); + } + } + x += 1; + /* Cut out param: cpupower -c 1 info -> cpupower info */ + new_argc += 2; + continue; + } else if (!strcmp(param, "-v") || + !strcmp(param, "--version")) { + print_version(); + exit(EXIT_SUCCESS); +#ifdef DEBUG + } else if (!strcmp(param, "-d") || !strcmp(param, "--debug")) { + be_verbose = 1; + new_argc++; + continue; +#endif + } else { + fprintf(stderr, "Unknown option: %s\n", param); + print_help(); + exit(EXIT_FAILURE); + } + } + *argc -= new_argc; + *argv += new_argc; +} + +int main(int argc, const char *argv[]) +{ + const char *cmd; + unsigned int i, ret; + + cpus_chosen = bitmask_alloc(sysconf(_SC_NPROCESSORS_CONF)); + + argc--; + argv += 1; + + handle_options(&argc, &argv); + + cmd = argv[0]; + + if (argc < 1) { + print_help(); + return EXIT_FAILURE; + } + + setlocale(LC_ALL, ""); + textdomain(PACKAGE); + + /* Turn "perf cmd --help" into "perf help cmd" */ + if (argc > 1 && !strcmp(argv[1], "--help")) { + argv[1] = argv[0]; + argv[0] = cmd = "help"; + } + + get_cpu_info(0, &cpupower_cpu_info); + run_as_root = !getuid(); + + for (i = 0; i < ARRAY_SIZE(commands); i++) { + struct cmd_struct *p = commands + i; + if (strcmp(p->cmd, cmd)) + continue; + if (!run_as_root && p->needs_root) { + fprintf(stderr, _("Subcommand %s needs root " + "privileges\n"), cmd); + return EXIT_FAILURE; + } + ret = p->main(argc, argv); + if (cpus_chosen) + bitmask_free(cpus_chosen); + return ret; + } + print_help(); + return EXIT_FAILURE; +} diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c new file mode 100644 index 0000000..87d5605 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/amd.c @@ -0,0 +1,137 @@ +#if defined(__i386__) || defined(__x86_64__) +#include <unistd.h> +#include <errno.h> +#include <stdio.h> +#include <stdint.h> + +#include <pci/pci.h> + +#include "helpers/helpers.h" + +#define MSR_AMD_PSTATE_STATUS 0xc0010063 +#define MSR_AMD_PSTATE 0xc0010064 +#define MSR_AMD_PSTATE_LIMIT 0xc0010061 + +union msr_pstate { + struct { + unsigned fid:6; + unsigned did:3; + unsigned vid:7; + unsigned res1:6; + unsigned nbdid:1; + unsigned res2:2; + unsigned nbvid:7; + unsigned iddval:8; + unsigned idddiv:2; + unsigned res3:21; + unsigned en:1; + } bits; + unsigned long long val; +}; + +static int get_did(int family, union msr_pstate pstate) +{ + int t; + + if (family == 0x12) + t = pstate.val & 0xf; + else + t = pstate.bits.did; + + return t; +} + +static int get_cof(int family, union msr_pstate pstate) +{ + int t; + int fid, did; + + did = get_did(family, pstate); + + t = 0x10; + fid = pstate.bits.fid; + if (family == 0x11) + t = 0x8; + + return (100 * (fid + t)) >> did; +} + +/* Needs: + * cpu -> the cpu that gets evaluated + * cpu_family -> The cpu's family (0x10, 0x12,...) + * boots_states -> how much boost states the machines support + * + * Fills up: + * pstates -> a pointer to an array of size MAX_HW_PSTATES + * must be initialized with zeros. + * All available HW pstates (including boost states) + * no -> amount of pstates above array got filled up with + * + * returns zero on success, -1 on failure + */ +int decode_pstates(unsigned int cpu, unsigned int cpu_family, + int boost_states, unsigned long *pstates, int *no) +{ + int i, psmax, pscur; + union msr_pstate pstate; + unsigned long long val; + + /* Only read out frequencies from HW when CPU might be boostable + to keep the code as short and clean as possible. + Otherwise frequencies are exported via ACPI tables. + */ + if (cpu_family < 0x10 || cpu_family == 0x14) + return -1; + + if (read_msr(cpu, MSR_AMD_PSTATE_LIMIT, &val)) + return -1; + + psmax = (val >> 4) & 0x7; + + if (read_msr(cpu, MSR_AMD_PSTATE_STATUS, &val)) + return -1; + + pscur = val & 0x7; + + pscur += boost_states; + psmax += boost_states; + for (i = 0; i <= psmax; i++) { + if (i >= MAX_HW_PSTATES) { + fprintf(stderr, "HW pstates [%d] exceeding max [%d]\n", + psmax, MAX_HW_PSTATES); + return -1; + } + if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val)) + return -1; + pstates[i] = get_cof(cpu_family, pstate); + } + *no = i; + return 0; +} + +int amd_pci_get_num_boost_states(int *active, int *states) +{ + struct pci_access *pci_acc; + int vendor_id = 0x1022; + int boost_dev_ids[4] = {0x1204, 0x1604, 0x1704, 0}; + struct pci_dev *device; + uint8_t val = 0; + + *active = *states = 0; + + device = pci_acc_init(&pci_acc, vendor_id, boost_dev_ids); + + if (device == NULL) + return -ENODEV; + + val = pci_read_byte(device, 0x15c); + if (val & 3) + *active = 1; + else + *active = 0; + *states = (val >> 2) & 7; + + pci_cleanup(pci_acc); + return 0; +} +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/helpers/bitmask.c b/tools/power/cpupower/utils/helpers/bitmask.c new file mode 100644 index 0000000..5c074c6 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/bitmask.c @@ -0,0 +1,292 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#include <helpers/bitmask.h> + +/* How many bits in an unsigned long */ +#define bitsperlong (8 * sizeof(unsigned long)) + +/* howmany(a,b) : how many elements of size b needed to hold all of a */ +#define howmany(x, y) (((x)+((y)-1))/(y)) + +/* How many longs in mask of n bits */ +#define longsperbits(n) howmany(n, bitsperlong) + +#define max(a, b) ((a) > (b) ? (a) : (b)) + +/* + * Allocate and free `struct bitmask *` + */ + +/* Allocate a new `struct bitmask` with a size of n bits */ +struct bitmask *bitmask_alloc(unsigned int n) +{ + struct bitmask *bmp; + + bmp = malloc(sizeof(*bmp)); + if (bmp == 0) + return 0; + bmp->size = n; + bmp->maskp = calloc(longsperbits(n), sizeof(unsigned long)); + if (bmp->maskp == 0) { + free(bmp); + return 0; + } + return bmp; +} + +/* Free `struct bitmask` */ +void bitmask_free(struct bitmask *bmp) +{ + if (bmp == 0) + return; + free(bmp->maskp); + bmp->maskp = (unsigned long *)0xdeadcdef; /* double free tripwire */ + free(bmp); +} + +/* + * The routines _getbit() and _setbit() are the only + * routines that actually understand the layout of bmp->maskp[]. + * + * On little endian architectures, this could simply be an array of + * bytes. But the kernel layout of bitmasks _is_ visible to userspace + * via the sched_(set/get)affinity calls in Linux 2.6, and on big + * endian architectures, it is painfully obvious that this is an + * array of unsigned longs. + */ + +/* Return the value (0 or 1) of bit n in bitmask bmp */ +static unsigned int _getbit(const struct bitmask *bmp, unsigned int n) +{ + if (n < bmp->size) + return (bmp->maskp[n/bitsperlong] >> (n % bitsperlong)) & 1; + else + return 0; +} + +/* Set bit n in bitmask bmp to value v (0 or 1) */ +static void _setbit(struct bitmask *bmp, unsigned int n, unsigned int v) +{ + if (n < bmp->size) { + if (v) + bmp->maskp[n/bitsperlong] |= 1UL << (n % bitsperlong); + else + bmp->maskp[n/bitsperlong] &= + ~(1UL << (n % bitsperlong)); + } +} + +/* + * When parsing bitmask lists, only allow numbers, separated by one + * of the allowed next characters. + * + * The parameter 'sret' is the return from a sscanf "%u%c". It is + * -1 if the sscanf input string was empty. It is 0 if the first + * character in the sscanf input string was not a decimal number. + * It is 1 if the unsigned number matching the "%u" was the end of the + * input string. It is 2 if one or more additional characters followed + * the matched unsigned number. If it is 2, then 'nextc' is the first + * character following the number. The parameter 'ok_next_chars' + * is the nul-terminated list of allowed next characters. + * + * The mask term just scanned was ok if and only if either the numbers + * matching the %u were all of the input or if the next character in + * the input past the numbers was one of the allowed next characters. + */ +static int scan_was_ok(int sret, char nextc, const char *ok_next_chars) +{ + return sret == 1 || + (sret == 2 && strchr(ok_next_chars, nextc) != NULL); +} + +static const char *nexttoken(const char *q, int sep) +{ + if (q) + q = strchr(q, sep); + if (q) + q++; + return q; +} + +/* Set a single bit i in bitmask */ +struct bitmask *bitmask_setbit(struct bitmask *bmp, unsigned int i) +{ + _setbit(bmp, i, 1); + return bmp; +} + +/* Set all bits in bitmask: bmp = ~0 */ +struct bitmask *bitmask_setall(struct bitmask *bmp) +{ + unsigned int i; + for (i = 0; i < bmp->size; i++) + _setbit(bmp, i, 1); + return bmp; +} + +/* Clear all bits in bitmask: bmp = 0 */ +struct bitmask *bitmask_clearall(struct bitmask *bmp) +{ + unsigned int i; + for (i = 0; i < bmp->size; i++) + _setbit(bmp, i, 0); + return bmp; +} + +/* True if all bits are clear */ +int bitmask_isallclear(const struct bitmask *bmp) +{ + unsigned int i; + for (i = 0; i < bmp->size; i++) + if (_getbit(bmp, i)) + return 0; + return 1; +} + +/* True if specified bit i is set */ +int bitmask_isbitset(const struct bitmask *bmp, unsigned int i) +{ + return _getbit(bmp, i); +} + +/* Number of lowest set bit (min) */ +unsigned int bitmask_first(const struct bitmask *bmp) +{ + return bitmask_next(bmp, 0); +} + +/* Number of highest set bit (max) */ +unsigned int bitmask_last(const struct bitmask *bmp) +{ + unsigned int i; + unsigned int m = bmp->size; + for (i = 0; i < bmp->size; i++) + if (_getbit(bmp, i)) + m = i; + return m; +} + +/* Number of next set bit at or above given bit i */ +unsigned int bitmask_next(const struct bitmask *bmp, unsigned int i) +{ + unsigned int n; + for (n = i; n < bmp->size; n++) + if (_getbit(bmp, n)) + break; + return n; +} + +/* + * Parses a comma-separated list of numbers and ranges of numbers, + * with optional ':%u' strides modifying ranges, into provided bitmask. + * Some examples of input lists and their equivalent simple list: + * Input Equivalent to + * 0-3 0,1,2,3 + * 0-7:2 0,2,4,6 + * 1,3,5-7 1,3,5,6,7 + * 0-3:2,8-15:4 0,2,8,12 + */ +int bitmask_parselist(const char *buf, struct bitmask *bmp) +{ + const char *p, *q; + + bitmask_clearall(bmp); + + q = buf; + while (p = q, q = nexttoken(q, ','), p) { + unsigned int a; /* begin of range */ + unsigned int b; /* end of range */ + unsigned int s; /* stride */ + const char *c1, *c2; /* next tokens after '-' or ',' */ + char nextc; /* char after sscanf %u match */ + int sret; /* sscanf return (number of matches) */ + + sret = sscanf(p, "%u%c", &a, &nextc); + if (!scan_was_ok(sret, nextc, ",-")) + goto err; + b = a; + s = 1; + c1 = nexttoken(p, '-'); + c2 = nexttoken(p, ','); + if (c1 != NULL && (c2 == NULL || c1 < c2)) { + sret = sscanf(c1, "%u%c", &b, &nextc); + if (!scan_was_ok(sret, nextc, ",:")) + goto err; + c1 = nexttoken(c1, ':'); + if (c1 != NULL && (c2 == NULL || c1 < c2)) { + sret = sscanf(c1, "%u%c", &s, &nextc); + if (!scan_was_ok(sret, nextc, ",")) + goto err; + } + } + if (!(a <= b)) + goto err; + if (b >= bmp->size) + goto err; + while (a <= b) { + _setbit(bmp, a, 1); + a += s; + } + } + return 0; +err: + bitmask_clearall(bmp); + return -1; +} + +/* + * emit(buf, buflen, rbot, rtop, len) + * + * Helper routine for bitmask_displaylist(). Write decimal number + * or range to buf+len, suppressing output past buf+buflen, with optional + * comma-prefix. Return len of what would be written to buf, if it + * all fit. + */ + +static inline int emit(char *buf, int buflen, int rbot, int rtop, int len) +{ + if (len > 0) + len += snprintf(buf + len, max(buflen - len, 0), ","); + if (rbot == rtop) + len += snprintf(buf + len, max(buflen - len, 0), "%d", rbot); + else + len += snprintf(buf + len, max(buflen - len, 0), "%d-%d", + rbot, rtop); + return len; +} + +/* + * Write decimal list representation of bmp to buf. + * + * Output format is a comma-separated list of decimal numbers and + * ranges. Consecutively set bits are shown as two hyphen-separated + * decimal numbers, the smallest and largest bit numbers set in + * the range. Output format is compatible with the format + * accepted as input by bitmap_parselist(). + * + * The return value is the number of characters which would be + * generated for the given input, excluding the trailing '\0', as + * per ISO C99. + */ + +int bitmask_displaylist(char *buf, int buflen, const struct bitmask *bmp) +{ + int len = 0; + /* current bit is 'cur', most recently seen range is [rbot, rtop] */ + unsigned int cur, rbot, rtop; + + if (buflen > 0) + *buf = 0; + rbot = cur = bitmask_first(bmp); + while (cur < bmp->size) { + rtop = cur; + cur = bitmask_next(bmp, cur+1); + if (cur >= bmp->size || cur > rtop + 1) { + len = emit(buf, buflen, rbot, rtop, len); + rbot = cur; + } + } + return len; +} diff --git a/tools/power/cpupower/utils/helpers/bitmask.h b/tools/power/cpupower/utils/helpers/bitmask.h new file mode 100644 index 0000000..eb289df --- /dev/null +++ b/tools/power/cpupower/utils/helpers/bitmask.h @@ -0,0 +1,33 @@ +#ifndef __CPUPOWER_BITMASK__ +#define __CPUPOWER_BITMASK__ + +/* Taken over from libbitmask, a project initiated from sgi: + * Url: http://oss.sgi.com/projects/cpusets/ + * Unfortunately it's not very widespread, therefore relevant parts are + * pasted here. + */ + +struct bitmask { + unsigned int size; + unsigned long *maskp; +}; + +struct bitmask *bitmask_alloc(unsigned int n); +void bitmask_free(struct bitmask *bmp); + +struct bitmask *bitmask_setbit(struct bitmask *bmp, unsigned int i); +struct bitmask *bitmask_setall(struct bitmask *bmp); +struct bitmask *bitmask_clearall(struct bitmask *bmp); + +unsigned int bitmask_first(const struct bitmask *bmp); +unsigned int bitmask_next(const struct bitmask *bmp, unsigned int i); +unsigned int bitmask_last(const struct bitmask *bmp); +int bitmask_isallclear(const struct bitmask *bmp); +int bitmask_isbitset(const struct bitmask *bmp, unsigned int i); + +int bitmask_parselist(const char *buf, struct bitmask *bmp); +int bitmask_displaylist(char *buf, int len, const struct bitmask *bmp); + + + +#endif /*__CPUPOWER_BITMASK__ */ diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c new file mode 100644 index 0000000..906895d --- /dev/null +++ b/tools/power/cpupower/utils/helpers/cpuid.c @@ -0,0 +1,176 @@ +#include <stdio.h> +#include <errno.h> +#include <string.h> +#include <unistd.h> +#include <stdlib.h> + +#include "helpers/helpers.h" + +static const char *cpu_vendor_table[X86_VENDOR_MAX] = { + "Unknown", "GenuineIntel", "AuthenticAMD", +}; + +#if defined(__i386__) || defined(__x86_64__) + +/* from gcc */ +#include <cpuid.h> + +/* + * CPUID functions returning a single datum + * + * Define unsigned int cpuid_e[abcd]x(unsigned int op) + */ +#define cpuid_func(reg) \ + unsigned int cpuid_##reg(unsigned int op) \ + { \ + unsigned int eax, ebx, ecx, edx; \ + __cpuid(op, eax, ebx, ecx, edx); \ + return reg; \ + } +cpuid_func(eax); +cpuid_func(ebx); +cpuid_func(ecx); +cpuid_func(edx); + +#endif /* defined(__i386__) || defined(__x86_64__) */ + +/* get_cpu_info + * + * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo + * + * Returns 0 on success or a negativ error code + * + * TBD: Should there be a cpuid alternative for this if /proc is not mounted? + */ +int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info) +{ + FILE *fp; + char value[64]; + unsigned int proc, x; + unsigned int unknown = 0xffffff; + unsigned int cpuid_level, ext_cpuid_level; + + int ret = -EINVAL; + + cpu_info->vendor = X86_VENDOR_UNKNOWN; + cpu_info->family = unknown; + cpu_info->model = unknown; + cpu_info->stepping = unknown; + cpu_info->caps = 0; + + fp = fopen("/proc/cpuinfo", "r"); + if (!fp) + return -EIO; + + while (!feof(fp)) { + if (!fgets(value, 64, fp)) + continue; + value[63 - 1] = '\0'; + + if (!strncmp(value, "processor\t: ", 12)) + sscanf(value, "processor\t: %u", &proc); + + if (proc != cpu) + continue; + + /* Get CPU vendor */ + if (!strncmp(value, "vendor_id", 9)) { + for (x = 1; x < X86_VENDOR_MAX; x++) { + if (strstr(value, cpu_vendor_table[x])) + cpu_info->vendor = x; + } + /* Get CPU family, etc. */ + } else if (!strncmp(value, "cpu family\t: ", 13)) { + sscanf(value, "cpu family\t: %u", + &cpu_info->family); + } else if (!strncmp(value, "model\t\t: ", 9)) { + sscanf(value, "model\t\t: %u", + &cpu_info->model); + } else if (!strncmp(value, "stepping\t: ", 10)) { + sscanf(value, "stepping\t: %u", + &cpu_info->stepping); + + /* Exit -> all values must have been set */ + if (cpu_info->vendor == X86_VENDOR_UNKNOWN || + cpu_info->family == unknown || + cpu_info->model == unknown || + cpu_info->stepping == unknown) { + ret = -EINVAL; + goto out; + } + + ret = 0; + goto out; + } + } + ret = -ENODEV; +out: + fclose(fp); + /* Get some useful CPU capabilities from cpuid */ + if (cpu_info->vendor != X86_VENDOR_AMD && + cpu_info->vendor != X86_VENDOR_INTEL) + return ret; + + cpuid_level = cpuid_eax(0); + ext_cpuid_level = cpuid_eax(0x80000000); + + /* Invariant TSC */ + if (ext_cpuid_level >= 0x80000007 && + (cpuid_edx(0x80000007) & (1 << 8))) + cpu_info->caps |= CPUPOWER_CAP_INV_TSC; + + /* Aperf/Mperf registers support */ + if (cpuid_level >= 6 && (cpuid_ecx(6) & 0x1)) + cpu_info->caps |= CPUPOWER_CAP_APERF; + + /* AMD Boost state enable/disable register */ + if (cpu_info->vendor == X86_VENDOR_AMD) { + if (ext_cpuid_level >= 0x80000007 && + (cpuid_edx(0x80000007) & (1 << 9))) + cpu_info->caps |= CPUPOWER_CAP_AMD_CBP; + } + + if (cpu_info->vendor == X86_VENDOR_INTEL) { + if (cpuid_level >= 6 && + (cpuid_eax(6) & (1 << 1))) + cpu_info->caps |= CPUPOWER_CAP_INTEL_IDA; + } + + if (cpu_info->vendor == X86_VENDOR_INTEL) { + /* Intel's perf-bias MSR support */ + if (cpuid_level >= 6 && (cpuid_ecx(6) & (1 << 3))) + cpu_info->caps |= CPUPOWER_CAP_PERF_BIAS; + + /* Intel's Turbo Ratio Limit support */ + if (cpu_info->family == 6) { + switch (cpu_info->model) { + case 0x1A: /* Core i7, Xeon 5500 series + * Bloomfield, Gainstown NHM-EP + */ + case 0x1E: /* Core i7 and i5 Processor + * Clarksfield, Lynnfield, Jasper Forest + */ + case 0x1F: /* Core i7 and i5 Processor - Nehalem */ + case 0x25: /* Westmere Client + * Clarkdale, Arrandale + */ + case 0x2C: /* Westmere EP - Gulftown */ + cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; + case 0x2A: /* SNB */ + case 0x2D: /* SNB Xeon */ + cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; + cpu_info->caps |= CPUPOWER_CAP_IS_SNB; + break; + case 0x2E: /* Nehalem-EX Xeon - Beckton */ + case 0x2F: /* Westmere-EX Xeon - Eagleton */ + default: + break; + } + } + } + + /* printf("ID: %u - Extid: 0x%x - Caps: 0x%llx\n", + cpuid_level, ext_cpuid_level, cpu_info->caps); + */ + return ret; +} diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h new file mode 100644 index 0000000..592ee36 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/helpers.h @@ -0,0 +1,178 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Miscellaneous helpers which do not fit or are worth + * to put into separate headers + */ + +#ifndef __CPUPOWERUTILS_HELPERS__ +#define __CPUPOWERUTILS_HELPERS__ + +#include <libintl.h> +#include <locale.h> + +#include "helpers/bitmask.h" + +/* Internationalization ****************************/ +#define _(String) gettext(String) +#ifndef gettext_noop +#define gettext_noop(String) String +#endif +#define N_(String) gettext_noop(String) +/* Internationalization ****************************/ + +extern int run_as_root; +extern struct bitmask *cpus_chosen; + +/* Global verbose (-d) stuff *********************************/ +/* + * define DEBUG via global Makefile variable + * Debug output is sent to stderr, do: + * cpupower monitor 2>/tmp/debug + * to split debug output away from normal output +*/ +#ifdef DEBUG +extern int be_verbose; + +#define dprint(fmt, ...) { \ + if (be_verbose) { \ + fprintf(stderr, "%s: " fmt, \ + __func__, ##__VA_ARGS__); \ + } \ + } +#else +static inline void dprint(const char *fmt, ...) { } +#endif +extern int be_verbose; +/* Global verbose (-v) stuff *********************************/ + +/* cpuid and cpuinfo helpers **************************/ +enum cpupower_cpu_vendor {X86_VENDOR_UNKNOWN = 0, X86_VENDOR_INTEL, + X86_VENDOR_AMD, X86_VENDOR_MAX}; + +#define CPUPOWER_CAP_INV_TSC 0x00000001 +#define CPUPOWER_CAP_APERF 0x00000002 +#define CPUPOWER_CAP_AMD_CBP 0x00000004 +#define CPUPOWER_CAP_PERF_BIAS 0x00000008 +#define CPUPOWER_CAP_HAS_TURBO_RATIO 0x00000010 +#define CPUPOWER_CAP_IS_SNB 0x00000011 +#define CPUPOWER_CAP_INTEL_IDA 0x00000012 + +#define MAX_HW_PSTATES 10 + +struct cpupower_cpu_info { + enum cpupower_cpu_vendor vendor; + unsigned int family; + unsigned int model; + unsigned int stepping; + /* CPU capabilities read out from cpuid */ + unsigned long long caps; +}; + +/* get_cpu_info + * + * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo + * + * Returns 0 on success or a negativ error code + * Only used on x86, below global's struct values are zero/unknown on + * other archs + */ +extern int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info); +extern struct cpupower_cpu_info cpupower_cpu_info; +/* cpuid and cpuinfo helpers **************************/ + + +/* CPU topology/hierarchy parsing ******************/ +struct cpupower_topology { + /* Amount of CPU cores, packages and threads per core in the system */ + unsigned int cores; + unsigned int pkgs; + unsigned int threads; /* per core */ + + /* Array gets mallocated with cores entries, holding per core info */ + struct { + int pkg; + int core; + int cpu; + } *core_info; +}; + +extern int get_cpu_topology(struct cpupower_topology *cpu_top); +extern void cpu_topology_release(struct cpupower_topology cpu_top); +/* CPU topology/hierarchy parsing ******************/ + +/* X86 ONLY ****************************************/ +#if defined(__i386__) || defined(__x86_64__) + +#include <pci/pci.h> + +/* Read/Write msr ****************************/ +extern int read_msr(int cpu, unsigned int idx, unsigned long long *val); +extern int write_msr(int cpu, unsigned int idx, unsigned long long val); + +extern int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val); +extern int msr_intel_get_perf_bias(unsigned int cpu); +extern unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu); + +/* Read/Write msr ****************************/ + +/* PCI stuff ****************************/ +extern int amd_pci_get_num_boost_states(int *active, int *states); +extern struct pci_dev *pci_acc_init(struct pci_access **pacc, int vendor_id, + int *dev_ids); + +/* PCI stuff ****************************/ + +/* AMD HW pstate decoding **************************/ + +extern int decode_pstates(unsigned int cpu, unsigned int cpu_family, + int boost_states, unsigned long *pstates, int *no); + +/* AMD HW pstate decoding **************************/ + +extern int cpufreq_has_boost_support(unsigned int cpu, int *support, + int *active, int * states); +/* + * CPUID functions returning a single datum + */ +unsigned int cpuid_eax(unsigned int op); +unsigned int cpuid_ebx(unsigned int op); +unsigned int cpuid_ecx(unsigned int op); +unsigned int cpuid_edx(unsigned int op); + +/* cpuid and cpuinfo helpers **************************/ +/* X86 ONLY ********************************************/ +#else +static inline int decode_pstates(unsigned int cpu, unsigned int cpu_family, + int boost_states, unsigned long *pstates, + int *no) +{ return -1; }; + +static inline int read_msr(int cpu, unsigned int idx, unsigned long long *val) +{ return -1; }; +static inline int write_msr(int cpu, unsigned int idx, unsigned long long val) +{ return -1; }; +static inline int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val) +{ return -1; }; +static inline int msr_intel_get_perf_bias(unsigned int cpu) +{ return -1; }; +static inline unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu) +{ return 0; }; + +/* Read/Write msr ****************************/ + +static inline int cpufreq_has_boost_support(unsigned int cpu, int *support, + int *active, int * states) +{ return -1; } + +/* cpuid and cpuinfo helpers **************************/ + +static inline unsigned int cpuid_eax(unsigned int op) { return 0; }; +static inline unsigned int cpuid_ebx(unsigned int op) { return 0; }; +static inline unsigned int cpuid_ecx(unsigned int op) { return 0; }; +static inline unsigned int cpuid_edx(unsigned int op) { return 0; }; +#endif /* defined(__i386__) || defined(__x86_64__) */ + +#endif /* __CPUPOWERUTILS_HELPERS__ */ diff --git a/tools/power/cpupower/utils/helpers/misc.c b/tools/power/cpupower/utils/helpers/misc.c new file mode 100644 index 0000000..1609243 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/misc.c @@ -0,0 +1,27 @@ +#if defined(__i386__) || defined(__x86_64__) + +#include "helpers/helpers.h" + +int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active, + int *states) +{ + struct cpupower_cpu_info cpu_info; + int ret; + + *support = *active = *states = 0; + + ret = get_cpu_info(0, &cpu_info); + if (ret) + return ret; + + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_CBP) { + *support = 1; + amd_pci_get_num_boost_states(active, states); + if (ret <= 0) + return ret; + *support = 1; + } else if (cpupower_cpu_info.caps & CPUPOWER_CAP_INTEL_IDA) + *support = *active = 1; + return 0; +} +#endif /* #if defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/helpers/msr.c b/tools/power/cpupower/utils/helpers/msr.c new file mode 100644 index 0000000..31a4b24 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/msr.c @@ -0,0 +1,115 @@ +#if defined(__i386__) || defined(__x86_64__) + +#include <fcntl.h> +#include <stdio.h> +#include <unistd.h> +#include <stdint.h> + +#include "helpers/helpers.h" + +/* Intel specific MSRs */ +#define MSR_IA32_PERF_STATUS 0x198 +#define MSR_IA32_MISC_ENABLES 0x1a0 +#define MSR_IA32_ENERGY_PERF_BIAS 0x1b0 +#define MSR_NEHALEM_TURBO_RATIO_LIMIT 0x1ad + +/* + * read_msr + * + * Will return 0 on success and -1 on failure. + * Possible errno values could be: + * EFAULT -If the read/write did not fully complete + * EIO -If the CPU does not support MSRs + * ENXIO -If the CPU does not exist + */ + +int read_msr(int cpu, unsigned int idx, unsigned long long *val) +{ + int fd; + char msr_file_name[64]; + + sprintf(msr_file_name, "/dev/cpu/%d/msr", cpu); + fd = open(msr_file_name, O_RDONLY); + if (fd < 0) + return -1; + if (lseek(fd, idx, SEEK_CUR) == -1) + goto err; + if (read(fd, val, sizeof *val) != sizeof *val) + goto err; + close(fd); + return 0; + err: + close(fd); + return -1; +} + +/* + * write_msr + * + * Will return 0 on success and -1 on failure. + * Possible errno values could be: + * EFAULT -If the read/write did not fully complete + * EIO -If the CPU does not support MSRs + * ENXIO -If the CPU does not exist + */ +int write_msr(int cpu, unsigned int idx, unsigned long long val) +{ + int fd; + char msr_file_name[64]; + + sprintf(msr_file_name, "/dev/cpu/%d/msr", cpu); + fd = open(msr_file_name, O_WRONLY); + if (fd < 0) + return -1; + if (lseek(fd, idx, SEEK_CUR) == -1) + goto err; + if (write(fd, &val, sizeof val) != sizeof val) + goto err; + close(fd); + return 0; + err: + close(fd); + return -1; +} + +int msr_intel_get_perf_bias(unsigned int cpu) +{ + unsigned long long val; + int ret; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) + return -1; + + ret = read_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &val); + if (ret) + return ret; + return val; +} + +int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val) +{ + int ret; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) + return -1; + + ret = write_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, val); + if (ret) + return ret; + return 0; +} + +unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu) +{ + unsigned long long val; + int ret; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO)) + return -1; + + ret = read_msr(cpu, MSR_NEHALEM_TURBO_RATIO_LIMIT, &val); + if (ret) + return ret; + return val; +} +#endif diff --git a/tools/power/cpupower/utils/helpers/pci.c b/tools/power/cpupower/utils/helpers/pci.c new file mode 100644 index 0000000..cd2eb6f --- /dev/null +++ b/tools/power/cpupower/utils/helpers/pci.c @@ -0,0 +1,44 @@ +#if defined(__i386__) || defined(__x86_64__) + +#include <helpers/helpers.h> + +/* + * pci_acc_init + * + * PCI access helper function depending on libpci + * + * **pacc : if a valid pci_dev is returned + * *pacc must be passed to pci_acc_cleanup to free it + * + * vendor_id : the pci vendor id matching the pci device to access + * dev_ids : device ids matching the pci device to access + * + * Returns : + * struct pci_dev which can be used with pci_{read,write}_* functions + * to access the PCI config space of matching pci devices + */ +struct pci_dev *pci_acc_init(struct pci_access **pacc, int vendor_id, + int *dev_ids) +{ + struct pci_filter filter_nb_link = { -1, -1, -1, -1, vendor_id, 0}; + struct pci_dev *device; + unsigned int i; + + *pacc = pci_alloc(); + if (*pacc == NULL) + return NULL; + + pci_init(*pacc); + pci_scan_bus(*pacc); + + for (i = 0; dev_ids[i] != 0; i++) { + filter_nb_link.device = dev_ids[i]; + for (device = (*pacc)->devices; device; device = device->next) { + if (pci_filter_match(&filter_nb_link, device)) + return device; + } + } + pci_cleanup(*pacc); + return NULL; +} +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c new file mode 100644 index 0000000..55e2466 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/sysfs.c @@ -0,0 +1,358 @@ +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * (C) 2011 Thomas Renninger <trenn@novell.com> Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + */ + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +#include "helpers/sysfs.h" + +unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen) +{ + int fd; + ssize_t numread; + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +static unsigned int sysfs_write_file(const char *path, + const char *value, size_t len) +{ + int fd; + ssize_t numwrite; + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + close(fd); + return (unsigned int) numwrite; +} + +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpuX/cpuidle/stateX/" dir + * cstates starting with 0, C0 is not counted as cstate. + * This means if you want C1 info, pass 0 as idlestate param + */ +unsigned int sysfs_idlestate_read_file(unsigned int cpu, unsigned int idlestate, + const char *fname, char *buf, size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* read access to files which contain one numeric value */ + +enum idlestate_value { + IDLESTATE_USAGE, + IDLESTATE_POWER, + IDLESTATE_LATENCY, + IDLESTATE_TIME, + MAX_IDLESTATE_VALUE_FILES +}; + +static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = { + [IDLESTATE_USAGE] = "usage", + [IDLESTATE_POWER] = "power", + [IDLESTATE_LATENCY] = "latency", + [IDLESTATE_TIME] = "time", +}; + +static unsigned long long sysfs_idlestate_get_one_value(unsigned int cpu, + unsigned int idlestate, + enum idlestate_value which) +{ + unsigned long long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_IDLESTATE_VALUE_FILES) + return 0; + + len = sysfs_idlestate_read_file(cpu, idlestate, + idlestate_value_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return 0; + + value = strtoull(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum idlestate_string { + IDLESTATE_DESC, + IDLESTATE_NAME, + MAX_IDLESTATE_STRING_FILES +}; + +static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = { + [IDLESTATE_DESC] = "desc", + [IDLESTATE_NAME] = "name", +}; + + +static char *sysfs_idlestate_get_one_string(unsigned int cpu, + unsigned int idlestate, + enum idlestate_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_IDLESTATE_STRING_FILES) + return NULL; + + len = sysfs_idlestate_read_file(cpu, idlestate, + idlestate_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +unsigned long sysfs_get_idlestate_latency(unsigned int cpu, + unsigned int idlestate) +{ + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_LATENCY); +} + +unsigned long sysfs_get_idlestate_usage(unsigned int cpu, + unsigned int idlestate) +{ + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_USAGE); +} + +unsigned long long sysfs_get_idlestate_time(unsigned int cpu, + unsigned int idlestate) +{ + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_TIME); +} + +char *sysfs_get_idlestate_name(unsigned int cpu, unsigned int idlestate) +{ + return sysfs_idlestate_get_one_string(cpu, idlestate, IDLESTATE_NAME); +} + +char *sysfs_get_idlestate_desc(unsigned int cpu, unsigned int idlestate) +{ + return sysfs_idlestate_get_one_string(cpu, idlestate, IDLESTATE_DESC); +} + +/* + * Returns number of supported C-states of CPU core cpu + * Negativ in error case + * Zero if cpuidle does not export any C-states + */ +int sysfs_get_idlestate_count(unsigned int cpu) +{ + char file[SYSFS_PATH_MAX]; + struct stat statbuf; + int idlestates = 1; + + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle"); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return -ENODEV; + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) { + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU + "cpu%u/cpuidle/state%d", cpu, idlestates); + idlestates++; + } + idlestates--; + return idlestates; +} + +/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/ + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpu/cpuidle/" dir + */ +static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf, + size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname); + + return sysfs_read_file(path, buf, buflen); +} + + + +/* read access to files which contain one string */ + +enum cpuidle_string { + CPUIDLE_GOVERNOR, + CPUIDLE_GOVERNOR_RO, + CPUIDLE_DRIVER, + MAX_CPUIDLE_STRING_FILES +}; + +static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = { + [CPUIDLE_GOVERNOR] = "current_governor", + [CPUIDLE_GOVERNOR_RO] = "current_governor_ro", + [CPUIDLE_DRIVER] = "current_driver", +}; + + +static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUIDLE_STRING_FILES) + return NULL; + + len = sysfs_cpuidle_read_file(cpuidle_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +char *sysfs_get_cpuidle_governor(void) +{ + char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO); + if (!tmp) + return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR); + else + return tmp; +} + +char *sysfs_get_cpuidle_driver(void) +{ + return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER); +} +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ + +/* + * Get sched_mc or sched_smt settings + * Pass "mc" or "smt" as argument + * + * Returns negative value on failure + */ +int sysfs_get_sched(const char *smt_mc) +{ + unsigned long value; + char linebuf[MAX_LINE_LEN]; + char *endp; + char path[SYSFS_PATH_MAX]; + + if (strcmp("mc", smt_mc) && strcmp("smt", smt_mc)) + return -EINVAL; + + snprintf(path, sizeof(path), + PATH_TO_CPU "sched_%s_power_savings", smt_mc); + if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0) + return -1; + value = strtoul(linebuf, &endp, 0); + if (endp == linebuf || errno == ERANGE) + return -1; + return value; +} + +/* + * Get sched_mc or sched_smt settings + * Pass "mc" or "smt" as argument + * + * Returns negative value on failure + */ +int sysfs_set_sched(const char *smt_mc, int val) +{ + char linebuf[MAX_LINE_LEN]; + char path[SYSFS_PATH_MAX]; + struct stat statbuf; + + if (strcmp("mc", smt_mc) && strcmp("smt", smt_mc)) + return -EINVAL; + + snprintf(path, sizeof(path), + PATH_TO_CPU "sched_%s_power_savings", smt_mc); + sprintf(linebuf, "%d", val); + + if (stat(path, &statbuf) != 0) + return -ENODEV; + + if (sysfs_write_file(path, linebuf, MAX_LINE_LEN) == 0) + return -1; + return 0; +} diff --git a/tools/power/cpupower/utils/helpers/sysfs.h b/tools/power/cpupower/utils/helpers/sysfs.h new file mode 100644 index 0000000..f9373e0 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/sysfs.h @@ -0,0 +1,28 @@ +#ifndef __CPUPOWER_HELPERS_SYSFS_H__ +#define __CPUPOWER_HELPERS_SYSFS_H__ + +#define PATH_TO_CPU "/sys/devices/system/cpu/" +#define MAX_LINE_LEN 255 +#define SYSFS_PATH_MAX 255 + +extern unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen); + +extern unsigned long sysfs_get_idlestate_latency(unsigned int cpu, + unsigned int idlestate); +extern unsigned long sysfs_get_idlestate_usage(unsigned int cpu, + unsigned int idlestate); +extern unsigned long long sysfs_get_idlestate_time(unsigned int cpu, + unsigned int idlestate); +extern char *sysfs_get_idlestate_name(unsigned int cpu, + unsigned int idlestate); +extern char *sysfs_get_idlestate_desc(unsigned int cpu, + unsigned int idlestate); +extern int sysfs_get_idlestate_count(unsigned int cpu); + +extern char *sysfs_get_cpuidle_governor(void); +extern char *sysfs_get_cpuidle_driver(void); + +extern int sysfs_get_sched(const char *smt_mc); +extern int sysfs_set_sched(const char *smt_mc, int val); + +#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */ diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c new file mode 100644 index 0000000..385ee5c --- /dev/null +++ b/tools/power/cpupower/utils/helpers/topology.c @@ -0,0 +1,108 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * ToDo: Needs to be done more properly for AMD/Intel specifics + */ + +/* Helper struct for qsort, must be in sync with cpupower_topology.cpu_info */ +/* Be careful: Need to pass unsigned to the sort, so that offlined cores are + in the end, but double check for -1 for offlined cpus at other places */ + +#include <stdlib.h> +#include <stdio.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <helpers/helpers.h> +#include <helpers/sysfs.h> + +/* returns -1 on failure, 0 on success */ +int sysfs_topology_read_file(unsigned int cpu, const char *fname) +{ + unsigned long value; + char linebuf[MAX_LINE_LEN]; + char *endp; + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s", + cpu, fname); + if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0) + return -1; + value = strtoul(linebuf, &endp, 0); + if (endp == linebuf || errno == ERANGE) + return -1; + return value; +} + +struct cpuid_core_info { + unsigned int pkg; + unsigned int thread; + unsigned int cpu; +}; + +static int __compare(const void *t1, const void *t2) +{ + struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1; + struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2; + if (top1->pkg < top2->pkg) + return -1; + else if (top1->pkg > top2->pkg) + return 1; + else if (top1->thread < top2->thread) + return -1; + else if (top1->thread > top2->thread) + return 1; + else if (top1->cpu < top2->cpu) + return -1; + else if (top1->cpu > top2->cpu) + return 1; + else + return 0; +} + +/* + * Returns amount of cpus, negative on error, cpu_top must be + * passed to cpu_topology_release to free resources + * + * Array is sorted after ->pkg, ->core, then ->cpu + */ +int get_cpu_topology(struct cpupower_topology *cpu_top) +{ + int cpu, cpus = sysconf(_SC_NPROCESSORS_CONF); + + cpu_top->core_info = malloc(sizeof(struct cpupower_topology) * cpus); + if (cpu_top->core_info == NULL) + return -ENOMEM; + cpu_top->pkgs = cpu_top->cores = 0; + for (cpu = 0; cpu < cpus; cpu++) { + cpu_top->core_info[cpu].pkg = + sysfs_topology_read_file(cpu, "physical_package_id"); + if ((int)cpu_top->core_info[cpu].pkg != -1 && + cpu_top->core_info[cpu].pkg > cpu_top->pkgs) + cpu_top->pkgs = cpu_top->core_info[cpu].pkg; + cpu_top->core_info[cpu].core = + sysfs_topology_read_file(cpu, "core_id"); + cpu_top->core_info[cpu].cpu = cpu; + } + cpu_top->pkgs++; + + qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info), + __compare); + + /* Intel's cores count is not consecutively numbered, there may + * be a core_id of 3, but none of 2. Assume there always is 0 + * Get amount of cores by counting duplicates in a package + for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) { + if (cpu_top->core_info[cpu].core == 0) + cpu_top->cores++; + */ + return cpus; +} + +void cpu_topology_release(struct cpupower_topology cpu_top) +{ + free(cpu_top.core_info); +} diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c new file mode 100644 index 0000000..202e555 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c @@ -0,0 +1,338 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * PCI initialization based on example code from: + * Andreas Herrmann <andreas.herrmann3@amd.com> + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <time.h> +#include <string.h> + +#include <pci/pci.h> + +#include "idle_monitor/cpupower-monitor.h" +#include "helpers/helpers.h" + +/******** PCI parts could go into own file and get shared ***************/ + +#define PCI_NON_PC0_OFFSET 0xb0 +#define PCI_PC1_OFFSET 0xb4 +#define PCI_PC6_OFFSET 0xb8 + +#define PCI_MONITOR_ENABLE_REG 0xe0 + +#define PCI_NON_PC0_ENABLE_BIT 0 +#define PCI_PC1_ENABLE_BIT 1 +#define PCI_PC6_ENABLE_BIT 2 + +#define PCI_NBP1_STAT_OFFSET 0x98 +#define PCI_NBP1_ACTIVE_BIT 2 +#define PCI_NBP1_ENTERED_BIT 1 + +#define PCI_NBP1_CAP_OFFSET 0x90 +#define PCI_NBP1_CAPABLE_BIT 31 + +#define OVERFLOW_MS 343597 /* 32 bit register filled at 12500 HZ + (1 tick per 80ns) */ + +enum amd_fam14h_states {NON_PC0 = 0, PC1, PC6, NBP1, + AMD_FAM14H_STATE_NUM}; + +static int fam14h_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); +static int fam14h_nbp1_count(unsigned int id, unsigned long long *count, + unsigned int cpu); + +static cstate_t amd_fam14h_cstates[AMD_FAM14H_STATE_NUM] = { + { + .name = "!PC0", + .desc = N_("Package in sleep state (PC1 or deeper)"), + .id = NON_PC0, + .range = RANGE_PACKAGE, + .get_count_percent = fam14h_get_count_percent, + }, + { + .name = "PC1", + .desc = N_("Processor Package C1"), + .id = PC1, + .range = RANGE_PACKAGE, + .get_count_percent = fam14h_get_count_percent, + }, + { + .name = "PC6", + .desc = N_("Processor Package C6"), + .id = PC6, + .range = RANGE_PACKAGE, + .get_count_percent = fam14h_get_count_percent, + }, + { + .name = "NBP1", + .desc = N_("North Bridge P1 boolean counter (returns 0 or 1)"), + .id = NBP1, + .range = RANGE_PACKAGE, + .get_count = fam14h_nbp1_count, + }, +}; + +static struct pci_access *pci_acc; +static int pci_vendor_id = 0x1022; +static int pci_dev_ids[2] = {0x1716, 0}; +static struct pci_dev *amd_fam14h_pci_dev; + +static int nbp1_entered; + +struct timespec start_time; +static unsigned long long timediff; + +#ifdef DEBUG +struct timespec dbg_time; +long dbg_timediff; +#endif + +static unsigned long long *previous_count[AMD_FAM14H_STATE_NUM]; +static unsigned long long *current_count[AMD_FAM14H_STATE_NUM]; + +static int amd_fam14h_get_pci_info(struct cstate *state, + unsigned int *pci_offset, + unsigned int *enable_bit, + unsigned int cpu) +{ + switch (state->id) { + case NON_PC0: + *enable_bit = PCI_NON_PC0_ENABLE_BIT; + *pci_offset = PCI_NON_PC0_OFFSET; + break; + case PC1: + *enable_bit = PCI_PC1_ENABLE_BIT; + *pci_offset = PCI_PC1_OFFSET; + break; + case PC6: + *enable_bit = PCI_PC6_ENABLE_BIT; + *pci_offset = PCI_PC6_OFFSET; + break; + case NBP1: + *enable_bit = PCI_NBP1_ENTERED_BIT; + *pci_offset = PCI_NBP1_STAT_OFFSET; + break; + default: + return -1; + }; + return 0; +} + +static int amd_fam14h_init(cstate_t *state, unsigned int cpu) +{ + int enable_bit, pci_offset, ret; + uint32_t val; + + ret = amd_fam14h_get_pci_info(state, &pci_offset, &enable_bit, cpu); + if (ret) + return ret; + + /* NBP1 needs extra treating -> write 1 to D18F6x98 bit 1 for init */ + if (state->id == NBP1) { + val = pci_read_long(amd_fam14h_pci_dev, pci_offset); + val |= 1 << enable_bit; + val = pci_write_long(amd_fam14h_pci_dev, pci_offset, val); + return ret; + } + + /* Enable monitor */ + val = pci_read_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG); + dprint("Init %s: read at offset: 0x%x val: %u\n", state->name, + PCI_MONITOR_ENABLE_REG, (unsigned int) val); + val |= 1 << enable_bit; + pci_write_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG, val); + + dprint("Init %s: offset: 0x%x enable_bit: %d - val: %u (%u)\n", + state->name, PCI_MONITOR_ENABLE_REG, enable_bit, + (unsigned int) val, cpu); + + /* Set counter to zero */ + pci_write_long(amd_fam14h_pci_dev, pci_offset, 0); + previous_count[state->id][cpu] = 0; + + return 0; +} + +static int amd_fam14h_disable(cstate_t *state, unsigned int cpu) +{ + int enable_bit, pci_offset, ret; + uint32_t val; + + ret = amd_fam14h_get_pci_info(state, &pci_offset, &enable_bit, cpu); + if (ret) + return ret; + + val = pci_read_long(amd_fam14h_pci_dev, pci_offset); + dprint("%s: offset: 0x%x %u\n", state->name, pci_offset, val); + if (state->id == NBP1) { + /* was the bit whether NBP1 got entered set? */ + nbp1_entered = (val & (1 << PCI_NBP1_ACTIVE_BIT)) | + (val & (1 << PCI_NBP1_ENTERED_BIT)); + + dprint("NBP1 was %sentered - 0x%x - enable_bit: " + "%d - pci_offset: 0x%x\n", + nbp1_entered ? "" : "not ", + val, enable_bit, pci_offset); + return ret; + } + current_count[state->id][cpu] = val; + + dprint("%s: Current - %llu (%u)\n", state->name, + current_count[state->id][cpu], cpu); + dprint("%s: Previous - %llu (%u)\n", state->name, + previous_count[state->id][cpu], cpu); + + val = pci_read_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG); + val &= ~(1 << enable_bit); + pci_write_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG, val); + + return 0; +} + +static int fam14h_nbp1_count(unsigned int id, unsigned long long *count, + unsigned int cpu) +{ + if (id == NBP1) { + if (nbp1_entered) + *count = 1; + else + *count = 0; + return 0; + } + return -1; +} +static int fam14h_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + unsigned long diff; + + if (id >= AMD_FAM14H_STATE_NUM) + return -1; + /* residency count in 80ns -> divide through 12.5 to get us residency */ + diff = current_count[id][cpu] - previous_count[id][cpu]; + + if (timediff == 0) + *percent = 0.0; + else + *percent = 100.0 * diff / timediff / 12.5; + + dprint("Timediff: %llu - res~: %lu us - percent: %.2f %%\n", + timediff, diff * 10 / 125, *percent); + + return 0; +} + +static int amd_fam14h_start(void) +{ + int num, cpu; + clock_gettime(CLOCK_REALTIME, &start_time); + for (num = 0; num < AMD_FAM14H_STATE_NUM; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) + amd_fam14h_init(&amd_fam14h_cstates[num], cpu); + } +#ifdef DEBUG + clock_gettime(CLOCK_REALTIME, &dbg_time); + dbg_timediff = timespec_diff_us(start_time, dbg_time); + dprint("Enabling counters took: %lu us\n", + dbg_timediff); +#endif + return 0; +} + +static int amd_fam14h_stop(void) +{ + int num, cpu; + struct timespec end_time; + + clock_gettime(CLOCK_REALTIME, &end_time); + + for (num = 0; num < AMD_FAM14H_STATE_NUM; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) + amd_fam14h_disable(&amd_fam14h_cstates[num], cpu); + } +#ifdef DEBUG + clock_gettime(CLOCK_REALTIME, &dbg_time); + dbg_timediff = timespec_diff_us(end_time, dbg_time); + dprint("Disabling counters took: %lu ns\n", dbg_timediff); +#endif + timediff = timespec_diff_us(start_time, end_time); + if (timediff / 1000 > OVERFLOW_MS) + print_overflow_err((unsigned int)timediff / 1000000, + OVERFLOW_MS / 1000); + + return 0; +} + +static int is_nbp1_capable(void) +{ + uint32_t val; + val = pci_read_long(amd_fam14h_pci_dev, PCI_NBP1_CAP_OFFSET); + return val & (1 << 31); +} + +struct cpuidle_monitor *amd_fam14h_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_AMD) + return NULL; + + if (cpupower_cpu_info.family == 0x14) { + if (cpu_count <= 0 || cpu_count > 2) { + fprintf(stderr, "AMD fam14h: Invalid cpu count: %d\n", + cpu_count); + return NULL; + } + } else + return NULL; + + /* We do not alloc for nbp1 machine wide counter */ + for (num = 0; num < AMD_FAM14H_STATE_NUM - 1; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + + amd_fam14h_pci_dev = pci_acc_init(&pci_acc, pci_vendor_id, pci_dev_ids); + if (amd_fam14h_pci_dev == NULL || pci_acc == NULL) + return NULL; + + if (!is_nbp1_capable()) + amd_fam14h_monitor.hw_states_num = AMD_FAM14H_STATE_NUM - 1; + + amd_fam14h_monitor.name_len = strlen(amd_fam14h_monitor.name); + return &amd_fam14h_monitor; +} + +static void amd_fam14h_unregister(void) +{ + int num; + for (num = 0; num < AMD_FAM14H_STATE_NUM - 1; num++) { + free(previous_count[num]); + free(current_count[num]); + } + pci_cleanup(pci_acc); +} + +struct cpuidle_monitor amd_fam14h_monitor = { + .name = "Ontario", + .hw_states = amd_fam14h_cstates, + .hw_states_num = AMD_FAM14H_STATE_NUM, + .start = amd_fam14h_start, + .stop = amd_fam14h_stop, + .do_register = amd_fam14h_register, + .unregister = amd_fam14h_unregister, + .needs_root = 1, + .overflow_s = OVERFLOW_MS / 1000, +}; +#endif /* #if defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c new file mode 100644 index 0000000..d048b96 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c @@ -0,0 +1,196 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc + * + * Licensed under the terms of the GNU GPL License version 2. + * + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <limits.h> + +#include "helpers/sysfs.h" +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define CPUIDLE_STATES_MAX 10 +static cstate_t cpuidle_cstates[CPUIDLE_STATES_MAX]; +struct cpuidle_monitor cpuidle_sysfs_monitor; + +static unsigned long long **previous_count; +static unsigned long long **current_count; +struct timespec start_time; +static unsigned long long timediff; + +static int cpuidle_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + unsigned long long statediff = current_count[cpu][id] + - previous_count[cpu][id]; + dprint("%s: - diff: %llu - percent: %f (%u)\n", + cpuidle_cstates[id].name, timediff, *percent, cpu); + + if (timediff == 0) + *percent = 0.0; + else + *percent = ((100.0 * statediff) / timediff); + + dprint("%s: - timediff: %llu - statediff: %llu - percent: %f (%u)\n", + cpuidle_cstates[id].name, timediff, statediff, *percent, cpu); + + return 0; +} + +static int cpuidle_start(void) +{ + int cpu, state; + clock_gettime(CLOCK_REALTIME, &start_time); + for (cpu = 0; cpu < cpu_count; cpu++) { + for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num; + state++) { + previous_count[cpu][state] = + sysfs_get_idlestate_time(cpu, state); + dprint("CPU %d - State: %d - Val: %llu\n", + cpu, state, previous_count[cpu][state]); + } + }; + return 0; +} + +static int cpuidle_stop(void) +{ + int cpu, state; + struct timespec end_time; + clock_gettime(CLOCK_REALTIME, &end_time); + timediff = timespec_diff_us(start_time, end_time); + + for (cpu = 0; cpu < cpu_count; cpu++) { + for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num; + state++) { + current_count[cpu][state] = + sysfs_get_idlestate_time(cpu, state); + dprint("CPU %d - State: %d - Val: %llu\n", + cpu, state, previous_count[cpu][state]); + } + }; + return 0; +} + +void fix_up_intel_idle_driver_name(char *tmp, int num) +{ + /* fix up cpuidle name for intel idle driver */ + if (!strncmp(tmp, "NHM-", 4)) { + switch (num) { + case 1: + strcpy(tmp, "C1"); + break; + case 2: + strcpy(tmp, "C3"); + break; + case 3: + strcpy(tmp, "C6"); + break; + } + } else if (!strncmp(tmp, "SNB-", 4)) { + switch (num) { + case 1: + strcpy(tmp, "C1"); + break; + case 2: + strcpy(tmp, "C3"); + break; + case 3: + strcpy(tmp, "C6"); + break; + case 4: + strcpy(tmp, "C7"); + break; + } + } else if (!strncmp(tmp, "ATM-", 4)) { + switch (num) { + case 1: + strcpy(tmp, "C1"); + break; + case 2: + strcpy(tmp, "C2"); + break; + case 3: + strcpy(tmp, "C4"); + break; + case 4: + strcpy(tmp, "C6"); + break; + } + } +} + +static struct cpuidle_monitor *cpuidle_register(void) +{ + int num; + char *tmp; + + /* Assume idle state count is the same for all CPUs */ + cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0); + + if (cpuidle_sysfs_monitor.hw_states_num == 0) + return NULL; + + for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) { + tmp = sysfs_get_idlestate_name(0, num); + if (tmp == NULL) + continue; + + fix_up_intel_idle_driver_name(tmp, num); + strncpy(cpuidle_cstates[num].name, tmp, CSTATE_NAME_LEN - 1); + free(tmp); + + tmp = sysfs_get_idlestate_desc(0, num); + if (tmp == NULL) + continue; + strncpy(cpuidle_cstates[num].desc, tmp, CSTATE_DESC_LEN - 1); + free(tmp); + + cpuidle_cstates[num].range = RANGE_THREAD; + cpuidle_cstates[num].id = num; + cpuidle_cstates[num].get_count_percent = + cpuidle_get_count_percent; + }; + + /* Free this at program termination */ + previous_count = malloc(sizeof(long long *) * cpu_count); + current_count = malloc(sizeof(long long *) * cpu_count); + for (num = 0; num < cpu_count; num++) { + previous_count[num] = malloc(sizeof(long long) * + cpuidle_sysfs_monitor.hw_states_num); + current_count[num] = malloc(sizeof(long long) * + cpuidle_sysfs_monitor.hw_states_num); + } + + cpuidle_sysfs_monitor.name_len = strlen(cpuidle_sysfs_monitor.name); + return &cpuidle_sysfs_monitor; +} + +void cpuidle_unregister(void) +{ + int num; + + for (num = 0; num < cpu_count; num++) { + free(previous_count[num]); + free(current_count[num]); + } + free(previous_count); + free(current_count); +} + +struct cpuidle_monitor cpuidle_sysfs_monitor = { + .name = "Idle_Stats", + .hw_states = cpuidle_cstates, + .start = cpuidle_start, + .stop = cpuidle_stop, + .do_register = cpuidle_register, + .unregister = cpuidle_unregister, + .needs_root = 0, + .overflow_s = UINT_MAX, +}; diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c new file mode 100644 index 0000000..ba4bf06 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c @@ -0,0 +1,448 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Output format inspired by Len Brown's <lenb@kernel.org> turbostat tool. + * + */ + + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <string.h> +#include <time.h> +#include <signal.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <libgen.h> + +#include "idle_monitor/cpupower-monitor.h" +#include "idle_monitor/idle_monitors.h" +#include "helpers/helpers.h" + +/* Define pointers to all monitors. */ +#define DEF(x) & x ## _monitor , +struct cpuidle_monitor *all_monitors[] = { +#include "idle_monitors.def" +0 +}; + +static struct cpuidle_monitor *monitors[MONITORS_MAX]; +static unsigned int avail_monitors; + +static char *progname; + +enum operation_mode_e { list = 1, show, show_all }; +static int mode; +static int interval = 1; +static char *show_monitors_param; +static struct cpupower_topology cpu_top; + +/* ToDo: Document this in the manpage */ +static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', }; + +long long timespec_diff_us(struct timespec start, struct timespec end) +{ + struct timespec temp; + if ((end.tv_nsec - start.tv_nsec) < 0) { + temp.tv_sec = end.tv_sec - start.tv_sec - 1; + temp.tv_nsec = 1000000000 + end.tv_nsec - start.tv_nsec; + } else { + temp.tv_sec = end.tv_sec - start.tv_sec; + temp.tv_nsec = end.tv_nsec - start.tv_nsec; + } + return (temp.tv_sec * 1000000) + (temp.tv_nsec / 1000); +} + +void monitor_help(void) +{ + printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] command\n")); + printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] [ -i interval_sec ]\n")); + printf(_("cpupower monitor: -l\n")); + printf(_("\t command: pass an arbitrary command to measure specific workload\n")); + printf(_("\t -i: time intervall to measure for in seconds (default 1)\n")); + printf(_("\t -l: list available CPU sleep monitors (for use with -m)\n")); + printf(_("\t -m: show specific CPU sleep monitors only (in same order)\n")); + printf(_("\t -h: print this help\n")); + printf("\n"); + printf(_("only one of: -l, -m are allowed\nIf none of them is passed,")); + printf(_(" all supported monitors are shown\n")); +} + +void print_n_spaces(int n) +{ + int x; + for (x = 0; x < n; x++) + printf(" "); +} + +/* size of s must be at least n + 1 */ +int fill_string_with_spaces(char *s, int n) +{ + int len = strlen(s); + if (len > n) + return -1; + for (; len < n; len++) + s[len] = ' '; + s[len] = '\0'; + return 0; +} + +void print_header(int topology_depth) +{ + int unsigned mon; + int state, need_len, pr_mon_len; + cstate_t s; + char buf[128] = ""; + int percent_width = 4; + + fill_string_with_spaces(buf, topology_depth * 5 - 1); + printf("%s|", buf); + + for (mon = 0; mon < avail_monitors; mon++) { + pr_mon_len = 0; + need_len = monitors[mon]->hw_states_num * (percent_width + 3) + - 1; + if (mon != 0) { + printf("|| "); + need_len--; + } + sprintf(buf, "%s", monitors[mon]->name); + fill_string_with_spaces(buf, need_len); + printf("%s", buf); + } + printf("\n"); + + if (topology_depth > 2) + printf("PKG |"); + if (topology_depth > 1) + printf("CORE|"); + if (topology_depth > 0) + printf("CPU |"); + + for (mon = 0; mon < avail_monitors; mon++) { + if (mon != 0) + printf("|| "); + else + printf(" "); + for (state = 0; state < monitors[mon]->hw_states_num; state++) { + if (state != 0) + printf(" | "); + s = monitors[mon]->hw_states[state]; + sprintf(buf, "%s", s.name); + fill_string_with_spaces(buf, percent_width); + printf("%s", buf); + } + printf(" "); + } + printf("\n"); +} + + +void print_results(int topology_depth, int cpu) +{ + unsigned int mon; + int state, ret; + double percent; + unsigned long long result; + cstate_t s; + + if (topology_depth > 2) + printf("%4d|", cpu_top.core_info[cpu].pkg); + if (topology_depth > 1) + printf("%4d|", cpu_top.core_info[cpu].core); + if (topology_depth > 0) + printf("%4d|", cpu_top.core_info[cpu].cpu); + + for (mon = 0; mon < avail_monitors; mon++) { + if (mon != 0) + printf("||"); + + for (state = 0; state < monitors[mon]->hw_states_num; state++) { + if (state != 0) + printf("|"); + + s = monitors[mon]->hw_states[state]; + + if (s.get_count_percent) { + ret = s.get_count_percent(s.id, &percent, + cpu_top.core_info[cpu].cpu); + if (ret) + printf("******"); + else if (percent >= 100.0) + printf("%6.1f", percent); + else + printf("%6.2f", percent); + } else if (s.get_count) { + ret = s.get_count(s.id, &result, + cpu_top.core_info[cpu].cpu); + if (ret) + printf("******"); + else + printf("%6llu", result); + } else { + printf(_("Monitor %s, Counter %s has no count " + "function. Implementation error\n"), + monitors[mon]->name, s.name); + exit(EXIT_FAILURE); + } + } + } + /* cpu offline */ + if (cpu_top.core_info[cpu].pkg == -1 || + cpu_top.core_info[cpu].core == -1) { + printf(_(" *is offline\n")); + return; + } else + printf("\n"); +} + + +/* param: string passed by -m param (The list of monitors to show) + * + * Monitors must have been registered already, matching monitors + * are picked out and available monitors array is overridden + * with matching ones + * + * Monitors get sorted in the same order the user passes them +*/ + +static void parse_monitor_param(char *param) +{ + unsigned int num; + int mon, hits = 0; + char *tmp = param, *token; + struct cpuidle_monitor *tmp_mons[MONITORS_MAX]; + + + for (mon = 0; mon < MONITORS_MAX; mon++, tmp = NULL) { + token = strtok(tmp, ","); + if (token == NULL) + break; + if (strlen(token) >= MONITOR_NAME_LEN) { + printf(_("%s: max monitor name length" + " (%d) exceeded\n"), token, MONITOR_NAME_LEN); + continue; + } + + for (num = 0; num < avail_monitors; num++) { + if (!strcmp(monitors[num]->name, token)) { + dprint("Found requested monitor: %s\n", token); + tmp_mons[hits] = monitors[num]; + hits++; + } + } + } + if (hits == 0) { + printf(_("No matching monitor found in %s, " + "try -l option\n"), param); + monitor_help(); + exit(EXIT_FAILURE); + } + /* Override detected/registerd monitors array with requested one */ + memcpy(monitors, tmp_mons, + sizeof(struct cpuidle_monitor *) * MONITORS_MAX); + avail_monitors = hits; +} + +void list_monitors(void) +{ + unsigned int mon; + int state; + cstate_t s; + + for (mon = 0; mon < avail_monitors; mon++) { + printf(_("Monitor \"%s\" (%d states) - Might overflow after %u " + "s\n"), + monitors[mon]->name, monitors[mon]->hw_states_num, + monitors[mon]->overflow_s); + + for (state = 0; state < monitors[mon]->hw_states_num; state++) { + s = monitors[mon]->hw_states[state]; + /* + * ToDo show more state capabilities: + * percent, time (granlarity) + */ + printf("%s\t[%c] -> %s\n", s.name, range_abbr[s.range], + gettext(s.desc)); + } + } +} + +int fork_it(char **argv) +{ + int status; + unsigned int num; + unsigned long long timediff; + pid_t child_pid; + struct timespec start, end; + + child_pid = fork(); + clock_gettime(CLOCK_REALTIME, &start); + + for (num = 0; num < avail_monitors; num++) + monitors[num]->start(); + + if (!child_pid) { + /* child */ + execvp(argv[0], argv); + } else { + /* parent */ + if (child_pid == -1) { + perror("fork"); + exit(1); + } + + signal(SIGINT, SIG_IGN); + signal(SIGQUIT, SIG_IGN); + if (waitpid(child_pid, &status, 0) == -1) { + perror("wait"); + exit(1); + } + } + clock_gettime(CLOCK_REALTIME, &end); + for (num = 0; num < avail_monitors; num++) + monitors[num]->stop(); + + timediff = timespec_diff_us(start, end); + if (WIFEXITED(status)) + printf(_("%s took %.5f seconds and exited with status %d\n"), + argv[0], timediff / (1000.0 * 1000), + WEXITSTATUS(status)); + return 0; +} + +int do_interval_measure(int i) +{ + unsigned int num; + + for (num = 0; num < avail_monitors; num++) { + dprint("HW C-state residency monitor: %s - States: %d\n", + monitors[num]->name, monitors[num]->hw_states_num); + monitors[num]->start(); + } + sleep(i); + for (num = 0; num < avail_monitors; num++) + monitors[num]->stop(); + + return 0; +} + +static void cmdline(int argc, char *argv[]) +{ + int opt; + progname = basename(argv[0]); + + while ((opt = getopt(argc, argv, "+hli:m:")) != -1) { + switch (opt) { + case 'h': + monitor_help(); + exit(EXIT_SUCCESS); + case 'l': + if (mode) { + monitor_help(); + exit(EXIT_FAILURE); + } + mode = list; + break; + case 'i': + /* only allow -i with -m or no option */ + if (mode && mode != show) { + monitor_help(); + exit(EXIT_FAILURE); + } + interval = atoi(optarg); + break; + case 'm': + if (mode) { + monitor_help(); + exit(EXIT_FAILURE); + } + mode = show; + show_monitors_param = optarg; + break; + default: + monitor_help(); + exit(EXIT_FAILURE); + } + } + if (!mode) + mode = show_all; +} + +int cmd_monitor(int argc, char **argv) +{ + unsigned int num; + struct cpuidle_monitor *test_mon; + int cpu; + + cmdline(argc, argv); + cpu_count = get_cpu_topology(&cpu_top); + if (cpu_count < 0) { + printf(_("Cannot read number of available processors\n")); + return EXIT_FAILURE; + } + + dprint("System has up to %d CPU cores\n", cpu_count); + + for (num = 0; all_monitors[num]; num++) { + dprint("Try to register: %s\n", all_monitors[num]->name); + test_mon = all_monitors[num]->do_register(); + if (test_mon) { + if (test_mon->needs_root && !run_as_root) { + fprintf(stderr, _("Available monitor %s needs " + "root access\n"), test_mon->name); + continue; + } + monitors[avail_monitors] = test_mon; + dprint("%s registered\n", all_monitors[num]->name); + avail_monitors++; + } + } + + if (avail_monitors == 0) { + printf(_("No HW Cstate monitors found\n")); + return 1; + } + + if (mode == list) { + list_monitors(); + exit(EXIT_SUCCESS); + } + + if (mode == show) + parse_monitor_param(show_monitors_param); + + dprint("Packages: %d - Cores: %d - CPUs: %d\n", + cpu_top.pkgs, cpu_top.cores, cpu_count); + + /* + * if any params left, it must be a command to fork + */ + if (argc - optind) + fork_it(argv + optind); + else + do_interval_measure(interval); + + /* ToDo: Topology parsing needs fixing first to do + this more generically */ + if (cpu_top.pkgs > 1) + print_header(3); + else + print_header(1); + + for (cpu = 0; cpu < cpu_count; cpu++) { + if (cpu_top.pkgs > 1) + print_results(3, cpu); + else + print_results(1, cpu); + } + + for (num = 0; num < avail_monitors; num++) + monitors[num]->unregister(); + + cpu_topology_release(cpu_top); + return 0; +} diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h new file mode 100644 index 0000000..9312ee1 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h @@ -0,0 +1,68 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + */ + +#ifndef __CPUIDLE_INFO_HW__ +#define __CPUIDLE_INFO_HW__ + +#include <stdarg.h> +#include <time.h> + +#include "idle_monitor/idle_monitors.h" + +#define MONITORS_MAX 20 +#define MONITOR_NAME_LEN 20 +#define CSTATE_NAME_LEN 5 +#define CSTATE_DESC_LEN 60 + +int cpu_count; + +/* Hard to define the right names ...: */ +enum power_range_e { + RANGE_THREAD, /* Lowest in topology hierarcy, AMD: core, Intel: thread + kernel sysfs: cpu */ + RANGE_CORE, /* AMD: unit, Intel: core, kernel_sysfs: core_id */ + RANGE_PACKAGE, /* Package, processor socket */ + RANGE_MACHINE, /* Machine, platform wide */ + RANGE_MAX }; + +typedef struct cstate { + int id; + enum power_range_e range; + char name[CSTATE_NAME_LEN]; + char desc[CSTATE_DESC_LEN]; + + /* either provide a percentage or a general count */ + int (*get_count_percent)(unsigned int self_id, double *percent, + unsigned int cpu); + int (*get_count)(unsigned int self_id, unsigned long long *count, + unsigned int cpu); +} cstate_t; + +struct cpuidle_monitor { + /* Name must not contain whitespaces */ + char name[MONITOR_NAME_LEN]; + int name_len; + int hw_states_num; + cstate_t *hw_states; + int (*start) (void); + int (*stop) (void); + struct cpuidle_monitor* (*do_register) (void); + void (*unregister)(void); + unsigned int overflow_s; + int needs_root; +}; + +extern long long timespec_diff_us(struct timespec start, struct timespec end); + +#define print_overflow_err(mes, ov) \ +{ \ + fprintf(stderr, gettext("Measure took %u seconds, but registers could " \ + "overflow at %u seconds, results " \ + "could be inaccurate\n"), mes, ov); \ +} + +#endif /* __CPUIDLE_INFO_HW__ */ diff --git a/tools/power/cpupower/utils/idle_monitor/idle_monitors.def b/tools/power/cpupower/utils/idle_monitor/idle_monitors.def new file mode 100644 index 0000000..e3f8d9b --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/idle_monitors.def @@ -0,0 +1,7 @@ +#if defined(__i386__) || defined(__x86_64__) +DEF(amd_fam14h) +DEF(intel_nhm) +DEF(intel_snb) +DEF(mperf) +#endif +DEF(cpuidle_sysfs) diff --git a/tools/power/cpupower/utils/idle_monitor/idle_monitors.h b/tools/power/cpupower/utils/idle_monitor/idle_monitors.h new file mode 100644 index 0000000..4fcdeb1 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/idle_monitors.h @@ -0,0 +1,18 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Based on the idea from Michael Matz <matz@suse.de> + * + */ + +#ifndef _CPUIDLE_IDLE_MONITORS_H_ +#define _CPUIDLE_IDLE_MONITORS_H_ + +#define DEF(x) extern struct cpuidle_monitor x ##_monitor; +#include "idle_monitors.def" +#undef DEF +extern struct cpuidle_monitor *all_monitors[]; + +#endif /* _CPUIDLE_IDLE_MONITORS_H_ */ diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c new file mode 100644 index 0000000..63ca87a --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c @@ -0,0 +1,255 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <limits.h> + +#include <cpufreq.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_APERF 0xE8 +#define MSR_MPERF 0xE7 + +#define MSR_TSC 0x10 + +enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT }; + +static int mperf_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); +static int mperf_get_count_freq(unsigned int id, unsigned long long *count, + unsigned int cpu); + +static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = { + { + .name = "C0", + .desc = N_("Processor Core not idle"), + .id = C0, + .range = RANGE_THREAD, + .get_count_percent = mperf_get_count_percent, + }, + { + .name = "Cx", + .desc = N_("Processor Core in an idle state"), + .id = Cx, + .range = RANGE_THREAD, + .get_count_percent = mperf_get_count_percent, + }, + + { + .name = "Freq", + .desc = N_("Average Frequency (including boost) in MHz"), + .id = AVG_FREQ, + .range = RANGE_THREAD, + .get_count = mperf_get_count_freq, + }, +}; + +static unsigned long long tsc_at_measure_start; +static unsigned long long tsc_at_measure_end; +static unsigned long max_frequency; +static unsigned long long *mperf_previous_count; +static unsigned long long *aperf_previous_count; +static unsigned long long *mperf_current_count; +static unsigned long long *aperf_current_count; +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int mperf_get_tsc(unsigned long long *tsc) +{ + return read_msr(0, MSR_TSC, tsc); +} + +static int mperf_init_stats(unsigned int cpu) +{ + unsigned long long val; + int ret; + + ret = read_msr(cpu, MSR_APERF, &val); + aperf_previous_count[cpu] = val; + ret |= read_msr(cpu, MSR_MPERF, &val); + mperf_previous_count[cpu] = val; + is_valid[cpu] = !ret; + + return 0; +} + +static int mperf_measure_stats(unsigned int cpu) +{ + unsigned long long val; + int ret; + + ret = read_msr(cpu, MSR_APERF, &val); + aperf_current_count[cpu] = val; + ret |= read_msr(cpu, MSR_MPERF, &val); + mperf_current_count[cpu] = val; + is_valid[cpu] = !ret; + + return 0; +} + +/* + * get_average_perf() + * + * Returns the average performance (also considers boosted frequencies) + * + * Input: + * aperf_diff: Difference of the aperf register over a time period + * mperf_diff: Difference of the mperf register over the same time period + * max_freq: Maximum frequency (P0) + * + * Returns: + * Average performance over the time period + */ +static unsigned long get_average_perf(unsigned long long aperf_diff, + unsigned long long mperf_diff) +{ + unsigned int perf_percent = 0; + if (((unsigned long)(-1) / 100) < aperf_diff) { + int shift_count = 7; + aperf_diff >>= shift_count; + mperf_diff >>= shift_count; + } + perf_percent = (aperf_diff * 100) / mperf_diff; + return (max_frequency * perf_percent) / 100; +} + +static int mperf_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + unsigned long long aperf_diff, mperf_diff, tsc_diff; + + if (!is_valid[cpu]) + return -1; + + if (id != C0 && id != Cx) + return -1; + + mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu]; + aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; + tsc_diff = tsc_at_measure_end - tsc_at_measure_start; + + *percent = 100.0 * mperf_diff / tsc_diff; + dprint("%s: mperf_diff: %llu, tsc_diff: %llu\n", + mperf_cstates[id].name, mperf_diff, tsc_diff); + + if (id == Cx) + *percent = 100.0 - *percent; + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + mperf_cstates[id].name, mperf_diff, aperf_diff, cpu); + dprint("%s: %f\n", mperf_cstates[id].name, *percent); + return 0; +} + +static int mperf_get_count_freq(unsigned int id, unsigned long long *count, + unsigned int cpu) +{ + unsigned long long aperf_diff, mperf_diff; + + if (id != AVG_FREQ) + return 1; + + if (!is_valid[cpu]) + return -1; + + mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu]; + aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; + + /* Return MHz for now, might want to return KHz if column width is more + generic */ + *count = get_average_perf(aperf_diff, mperf_diff) / 1000; + dprint("%s: %llu\n", mperf_cstates[id].name, *count); + + return 0; +} + +static int mperf_start(void) +{ + int cpu; + unsigned long long dbg; + + mperf_get_tsc(&tsc_at_measure_start); + + for (cpu = 0; cpu < cpu_count; cpu++) + mperf_init_stats(cpu); + + mperf_get_tsc(&dbg); + dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start); + return 0; +} + +static int mperf_stop(void) +{ + unsigned long long dbg; + int cpu; + + mperf_get_tsc(&tsc_at_measure_end); + + for (cpu = 0; cpu < cpu_count; cpu++) + mperf_measure_stats(cpu); + + mperf_get_tsc(&dbg); + dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end); + + return 0; +} + +struct cpuidle_monitor mperf_monitor; + +struct cpuidle_monitor *mperf_register(void) +{ + unsigned long min; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF)) + return NULL; + + /* Assume min/max all the same on all cores */ + if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) { + dprint("Cannot retrieve max freq from cpufreq kernel " + "subsystem\n"); + return NULL; + } + + /* Free this at program termination */ + is_valid = calloc(cpu_count, sizeof(int)); + mperf_previous_count = calloc(cpu_count, sizeof(unsigned long long)); + aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long)); + mperf_current_count = calloc(cpu_count, sizeof(unsigned long long)); + aperf_current_count = calloc(cpu_count, sizeof(unsigned long long)); + + mperf_monitor.name_len = strlen(mperf_monitor.name); + return &mperf_monitor; +} + +void mperf_unregister(void) +{ + free(mperf_previous_count); + free(aperf_previous_count); + free(mperf_current_count); + free(aperf_current_count); + free(is_valid); +} + +struct cpuidle_monitor mperf_monitor = { + .name = "Mperf", + .hw_states_num = MPERF_CSTATE_COUNT, + .hw_states = mperf_cstates, + .start = mperf_start, + .stop = mperf_stop, + .do_register = mperf_register, + .unregister = mperf_unregister, + .needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif /* #if defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c new file mode 100644 index 0000000..d2a91dd --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c @@ -0,0 +1,216 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Based on Len Brown's <lenb@kernel.org> turbostat tool. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_PKG_C3_RESIDENCY 0x3F8 +#define MSR_PKG_C6_RESIDENCY 0x3F9 +#define MSR_CORE_C3_RESIDENCY 0x3FC +#define MSR_CORE_C6_RESIDENCY 0x3FD + +#define MSR_TSC 0x10 + +#define NHM_CSTATE_COUNT 4 + +enum intel_nhm_id { C3 = 0, C6, PC3, PC6, TSC = 0xFFFF }; + +static int nhm_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); + +static cstate_t nhm_cstates[NHM_CSTATE_COUNT] = { + { + .name = "C3", + .desc = N_("Processor Core C3"), + .id = C3, + .range = RANGE_CORE, + .get_count_percent = nhm_get_count_percent, + }, + { + .name = "C6", + .desc = N_("Processor Core C6"), + .id = C6, + .range = RANGE_CORE, + .get_count_percent = nhm_get_count_percent, + }, + + { + .name = "PC3", + .desc = N_("Processor Package C3"), + .id = PC3, + .range = RANGE_PACKAGE, + .get_count_percent = nhm_get_count_percent, + }, + { + .name = "PC6", + .desc = N_("Processor Package C6"), + .id = PC6, + .range = RANGE_PACKAGE, + .get_count_percent = nhm_get_count_percent, + }, +}; + +static unsigned long long tsc_at_measure_start; +static unsigned long long tsc_at_measure_end; +static unsigned long long *previous_count[NHM_CSTATE_COUNT]; +static unsigned long long *current_count[NHM_CSTATE_COUNT]; +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int nhm_get_count(enum intel_nhm_id id, unsigned long long *val, + unsigned int cpu) +{ + int msr; + + switch (id) { + case C3: + msr = MSR_CORE_C3_RESIDENCY; + break; + case C6: + msr = MSR_CORE_C6_RESIDENCY; + break; + case PC3: + msr = MSR_PKG_C3_RESIDENCY; + break; + case PC6: + msr = MSR_PKG_C6_RESIDENCY; + break; + case TSC: + msr = MSR_TSC; + break; + default: + return -1; + }; + if (read_msr(cpu, msr, val)) + return -1; + + return 0; +} + +static int nhm_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + *percent = 0.0; + + if (!is_valid[cpu]) + return -1; + + *percent = (100.0 * + (current_count[id][cpu] - previous_count[id][cpu])) / + (tsc_at_measure_end - tsc_at_measure_start); + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + nhm_cstates[id].name, previous_count[id][cpu], + current_count[id][cpu], cpu); + + dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n", + nhm_cstates[id].name, + (unsigned long long) tsc_at_measure_end - tsc_at_measure_start, + current_count[id][cpu] - previous_count[id][cpu], + *percent, cpu); + + return 0; +} + +static int nhm_start(void) +{ + int num, cpu; + unsigned long long dbg, val; + + nhm_get_count(TSC, &tsc_at_measure_start, 0); + + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !nhm_get_count(num, &val, cpu); + previous_count[num][cpu] = val; + } + } + nhm_get_count(TSC, &dbg, 0); + dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start); + return 0; +} + +static int nhm_stop(void) +{ + unsigned long long val; + unsigned long long dbg; + int num, cpu; + + nhm_get_count(TSC, &tsc_at_measure_end, 0); + + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !nhm_get_count(num, &val, cpu); + current_count[num][cpu] = val; + } + } + nhm_get_count(TSC, &dbg, 0); + dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end); + + return 0; +} + +struct cpuidle_monitor intel_nhm_monitor; + +struct cpuidle_monitor *intel_nhm_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL) + return NULL; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)) + return NULL; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF)) + return NULL; + + /* Free this at program termination */ + is_valid = calloc(cpu_count, sizeof(int)); + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + + intel_nhm_monitor.name_len = strlen(intel_nhm_monitor.name); + return &intel_nhm_monitor; +} + +void intel_nhm_unregister(void) +{ + int num; + + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + free(previous_count[num]); + free(current_count[num]); + } + free(is_valid); +} + +struct cpuidle_monitor intel_nhm_monitor = { + .name = "Nehalem", + .hw_states_num = NHM_CSTATE_COUNT, + .hw_states = nhm_cstates, + .start = nhm_start, + .stop = nhm_stop, + .do_register = intel_nhm_register, + .unregister = intel_nhm_unregister, + .needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c new file mode 100644 index 0000000..a1bc07cd --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c @@ -0,0 +1,190 @@ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Based on Len Brown's <lenb@kernel.org> turbostat tool. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_PKG_C2_RESIDENCY 0x60D +#define MSR_PKG_C7_RESIDENCY 0x3FA +#define MSR_CORE_C7_RESIDENCY 0x3FE + +#define MSR_TSC 0x10 + +enum intel_snb_id { C7 = 0, PC2, PC7, SNB_CSTATE_COUNT, TSC = 0xFFFF }; + +static int snb_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); + +static cstate_t snb_cstates[SNB_CSTATE_COUNT] = { + { + .name = "C7", + .desc = N_("Processor Core C7"), + .id = C7, + .range = RANGE_CORE, + .get_count_percent = snb_get_count_percent, + }, + { + .name = "PC2", + .desc = N_("Processor Package C2"), + .id = PC2, + .range = RANGE_PACKAGE, + .get_count_percent = snb_get_count_percent, + }, + { + .name = "PC7", + .desc = N_("Processor Package C7"), + .id = PC7, + .range = RANGE_PACKAGE, + .get_count_percent = snb_get_count_percent, + }, +}; + +static unsigned long long tsc_at_measure_start; +static unsigned long long tsc_at_measure_end; +static unsigned long long *previous_count[SNB_CSTATE_COUNT]; +static unsigned long long *current_count[SNB_CSTATE_COUNT]; +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int snb_get_count(enum intel_snb_id id, unsigned long long *val, + unsigned int cpu) +{ + int msr; + + switch (id) { + case C7: + msr = MSR_CORE_C7_RESIDENCY; + break; + case PC2: + msr = MSR_PKG_C2_RESIDENCY; + break; + case PC7: + msr = MSR_PKG_C7_RESIDENCY; + break; + case TSC: + msr = MSR_TSC; + break; + default: + return -1; + }; + if (read_msr(cpu, msr, val)) + return -1; + return 0; +} + +static int snb_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + *percent = 0.0; + + if (!is_valid[cpu]) + return -1; + + *percent = (100.0 * + (current_count[id][cpu] - previous_count[id][cpu])) / + (tsc_at_measure_end - tsc_at_measure_start); + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + snb_cstates[id].name, previous_count[id][cpu], + current_count[id][cpu], cpu); + + dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n", + snb_cstates[id].name, + (unsigned long long) tsc_at_measure_end - tsc_at_measure_start, + current_count[id][cpu] - previous_count[id][cpu], + *percent, cpu); + + return 0; +} + +static int snb_start(void) +{ + int num, cpu; + unsigned long long val; + + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + snb_get_count(num, &val, cpu); + previous_count[num][cpu] = val; + } + } + snb_get_count(TSC, &tsc_at_measure_start, 0); + return 0; +} + +static int snb_stop(void) +{ + unsigned long long val; + int num, cpu; + + snb_get_count(TSC, &tsc_at_measure_end, 0); + + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !snb_get_count(num, &val, cpu); + current_count[num][cpu] = val; + } + } + return 0; +} + +struct cpuidle_monitor intel_snb_monitor; + +static struct cpuidle_monitor *snb_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL + || cpupower_cpu_info.family != 6) + return NULL; + + if (cpupower_cpu_info.model != 0x2A + && cpupower_cpu_info.model != 0x2D) + return NULL; + + is_valid = calloc(cpu_count, sizeof(int)); + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + intel_snb_monitor.name_len = strlen(intel_snb_monitor.name); + return &intel_snb_monitor; +} + +void snb_unregister(void) +{ + int num; + free(is_valid); + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + free(previous_count[num]); + free(current_count[num]); + } +} + +struct cpuidle_monitor intel_snb_monitor = { + .name = "SandyBridge", + .hw_states = snb_cstates, + .hw_states_num = SNB_CSTATE_COUNT, + .start = snb_start, + .stop = snb_stop, + .do_register = snb_register, + .unregister = snb_unregister, + .needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/version-gen.sh b/tools/power/cpupower/utils/version-gen.sh new file mode 100755 index 0000000..5ec41c5 --- /dev/null +++ b/tools/power/cpupower/utils/version-gen.sh @@ -0,0 +1,35 @@ +#!/bin/sh +# +# Script which prints out the version to use for building cpupowerutils. +# Must be called from tools/power/cpupower/ +# +# Heavily based on tools/perf/util/PERF-VERSION-GEN . + +LF=' +' + +# First check if there is a .git to get the version from git describe +# otherwise try to get the version from the kernel makefile +if test -d ../../../.git -o -f ../../../.git && + VN=$(git describe --abbrev=4 HEAD 2>/dev/null) && + case "$VN" in + *$LF*) (exit 1) ;; + v[0-9]*) + git update-index -q --refresh + test -z "$(git diff-index --name-only HEAD --)" || + VN="$VN-dirty" ;; + esac +then + VN=$(echo "$VN" | sed -e 's/-/./g'); +else + eval $(grep '^VERSION[[:space:]]*=' ../../../Makefile|tr -d ' ') + eval $(grep '^PATCHLEVEL[[:space:]]*=' ../../../Makefile|tr -d ' ') + eval $(grep '^SUBLEVEL[[:space:]]*=' ../../../Makefile|tr -d ' ') + eval $(grep '^EXTRAVERSION[[:space:]]*=' ../../../Makefile|tr -d ' ') + + VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}" +fi + +VN=$(expr "$VN" : v*'\(.*\)') + +echo $VN diff --git a/tools/slub/slabinfo.c b/tools/slub/slabinfo.c index 516551c..868cc93 100644 --- a/tools/slub/slabinfo.c +++ b/tools/slub/slabinfo.c @@ -2,8 +2,9 @@ * Slabinfo: Tool to get reports about slabs * * (C) 2007 sgi, Christoph Lameter + * (C) 2011 Linux Foundation, Christoph Lameter * - * Compile by: + * Compile with: * * gcc -o slabinfo slabinfo.c */ @@ -39,6 +40,8 @@ struct slabinfo { unsigned long cpuslab_flush, deactivate_full, deactivate_empty; unsigned long deactivate_to_head, deactivate_to_tail; unsigned long deactivate_remote_frees, order_fallback; + unsigned long cmpxchg_double_cpu_fail, cmpxchg_double_fail; + unsigned long alloc_node_mismatch, deactivate_bypass; int numa[MAX_NODES]; int numa_partial[MAX_NODES]; } slabinfo[MAX_SLABS]; @@ -99,7 +102,7 @@ static void fatal(const char *x, ...) static void usage(void) { - printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n" + printf("slabinfo 4/15/2011. (c) 2007 sgi/(c) 2011 Linux Foundation.\n\n" "slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n" "-a|--aliases Show aliases\n" "-A|--activity Most active slabs first\n" @@ -293,7 +296,7 @@ int line = 0; static void first_line(void) { if (show_activity) - printf("Name Objects Alloc Free %%Fast Fallb O\n"); + printf("Name Objects Alloc Free %%Fast Fallb O CmpX UL\n"); else printf("Name Objects Objsize Space " "Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n"); @@ -379,14 +382,14 @@ static void show_tracking(struct slabinfo *s) printf("\n%s: Kernel object allocation\n", s->name); printf("-----------------------------------------------------------------------\n"); if (read_slab_obj(s, "alloc_calls")) - printf(buffer); + printf("%s", buffer); else printf("No Data\n"); printf("\n%s: Kernel object freeing\n", s->name); printf("------------------------------------------------------------------------\n"); if (read_slab_obj(s, "free_calls")) - printf(buffer); + printf("%s", buffer); else printf("No Data\n"); @@ -400,7 +403,7 @@ static void ops(struct slabinfo *s) if (read_slab_obj(s, "ops")) { printf("\n%s: kmem_cache operations\n", s->name); printf("--------------------------------------------\n"); - printf(buffer); + printf("%s", buffer); } else printf("\n%s has no kmem_cache operations\n", s->name); } @@ -462,19 +465,32 @@ static void slab_stats(struct slabinfo *s) if (s->cpuslab_flush) printf("Flushes %8lu\n", s->cpuslab_flush); - if (s->alloc_refill) - printf("Refill %8lu\n", s->alloc_refill); - total = s->deactivate_full + s->deactivate_empty + - s->deactivate_to_head + s->deactivate_to_tail; - - if (total) - printf("Deactivate Full=%lu(%lu%%) Empty=%lu(%lu%%) " - "ToHead=%lu(%lu%%) ToTail=%lu(%lu%%)\n", - s->deactivate_full, (s->deactivate_full * 100) / total, - s->deactivate_empty, (s->deactivate_empty * 100) / total, - s->deactivate_to_head, (s->deactivate_to_head * 100) / total, + s->deactivate_to_head + s->deactivate_to_tail + s->deactivate_bypass; + + if (total) { + printf("\nSlab Deactivation Ocurrences %%\n"); + printf("-------------------------------------------------\n"); + printf("Slab full %7lu %3lu%%\n", + s->deactivate_full, (s->deactivate_full * 100) / total); + printf("Slab empty %7lu %3lu%%\n", + s->deactivate_empty, (s->deactivate_empty * 100) / total); + printf("Moved to head of partial list %7lu %3lu%%\n", + s->deactivate_to_head, (s->deactivate_to_head * 100) / total); + printf("Moved to tail of partial list %7lu %3lu%%\n", s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total); + printf("Deactivation bypass %7lu %3lu%%\n", + s->deactivate_bypass, (s->deactivate_bypass * 100) / total); + printf("Refilled from foreign frees %7lu %3lu%%\n", + s->alloc_refill, (s->alloc_refill * 100) / total); + printf("Node mismatch %7lu %3lu%%\n", + s->alloc_node_mismatch, (s->alloc_node_mismatch * 100) / total); + } + + if (s->cmpxchg_double_fail || s->cmpxchg_double_cpu_fail) + printf("\nCmpxchg_double Looping\n------------------------\n"); + printf("Locked Cmpxchg Double redos %lu\nUnlocked Cmpxchg Double redos %lu\n", + s->cmpxchg_double_fail, s->cmpxchg_double_cpu_fail); } static void report(struct slabinfo *s) @@ -573,12 +589,13 @@ static void slabcache(struct slabinfo *s) total_alloc = s->alloc_fastpath + s->alloc_slowpath; total_free = s->free_fastpath + s->free_slowpath; - printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n", + printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d %4ld %4ld\n", s->name, s->objects, total_alloc, total_free, total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0, total_free ? (s->free_fastpath * 100 / total_free) : 0, - s->order_fallback, s->order); + s->order_fallback, s->order, s->cmpxchg_double_fail, + s->cmpxchg_double_cpu_fail); } else printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n", @@ -1190,6 +1207,10 @@ static void read_slab_dir(void) slab->deactivate_to_tail = get_obj("deactivate_to_tail"); slab->deactivate_remote_frees = get_obj("deactivate_remote_frees"); slab->order_fallback = get_obj("order_fallback"); + slab->cmpxchg_double_cpu_fail = get_obj("cmpxchg_double_cpu_fail"); + slab->cmpxchg_double_fail = get_obj("cmpxchg_double_fail"); + slab->alloc_node_mismatch = get_obj("alloc_node_mismatch"); + slab->deactivate_bypass = get_obj("deactivate_bypass"); chdir(".."); if (slab->name[0] == ':') alias_targets++; diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index cef28e6..8d02ccb 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -27,7 +27,7 @@ $default{"TEST_TYPE"} = "test"; $default{"BUILD_TYPE"} = "randconfig"; $default{"MAKE_CMD"} = "make"; $default{"TIMEOUT"} = 120; -$default{"TMP_DIR"} = "/tmp/ktest"; +$default{"TMP_DIR"} = "/tmp/ktest/\${MACHINE}"; $default{"SLEEP_TIME"} = 60; # sleep time between tests $default{"BUILD_NOCLEAN"} = 0; $default{"REBOOT_ON_ERROR"} = 0; @@ -41,6 +41,7 @@ $default{"CLEAR_LOG"} = 0; $default{"BISECT_MANUAL"} = 0; $default{"BISECT_SKIP"} = 1; $default{"SUCCESS_LINE"} = "login:"; +$default{"DETECT_TRIPLE_FAULT"} = 1; $default{"BOOTED_TIMEOUT"} = 1; $default{"DIE_ON_FAILURE"} = 1; $default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; @@ -62,6 +63,10 @@ my $output_config; my $test_type; my $build_type; my $build_options; +my $pre_build; +my $post_build; +my $pre_build_die; +my $post_build_die; my $reboot_type; my $reboot_script; my $power_cycle; @@ -81,12 +86,17 @@ my $make; my $post_install; my $noclean; my $minconfig; +my $start_minconfig; +my $start_minconfig_defined; +my $output_minconfig; +my $ignore_config; my $addconfig; my $in_bisect = 0; my $bisect_bad = ""; my $reverse_bisect; my $bisect_manual; my $bisect_skip; +my $config_bisect_good; my $in_patchcheck = 0; my $run_test; my $redirect; @@ -98,9 +108,12 @@ my $monitor_cnt = 0; my $sleep_time; my $bisect_sleep_time; my $patchcheck_sleep_time; +my $ignore_warnings; my $store_failures; +my $test_name; my $timeout; my $booted_timeout; +my $detect_triplefault; my $console; my $success_line; my $stop_after_success; @@ -115,6 +128,7 @@ my $successes = 0; my %entered_configs; my %config_help; my %variable; +my %force_config; $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. @@ -204,6 +218,26 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF" EOF ; +sub read_yn { + my ($prompt) = @_; + + my $ans; + + for (;;) { + print "$prompt [Y/n] "; + $ans = <STDIN>; + chomp $ans; + if ($ans =~ /^\s*$/) { + $ans = "y"; + } + last if ($ans =~ /^y$/i || $ans =~ /^n$/i); + print "Please answer either 'y' or 'n'.\n"; + } + if ($ans !~ /^y$/i) { + return 0; + } + return 1; +} sub get_ktest_config { my ($config) = @_; @@ -335,6 +369,7 @@ sub read_config { my $num_tests_set = 0; my $skip = 0; my $rest; + my $test_case = 0; while (<IN>) { @@ -360,6 +395,7 @@ sub read_config { $rest = $1; $skip = 1; } else { + $test_case = 1; $skip = 0; } @@ -464,6 +500,15 @@ sub read_config { # make sure we have all mandatory configs get_ktest_configs; + # was a test specified? + if (!$test_case) { + print "No test case specified.\n"; + print "What test case would you like to run?\n"; + my $ans = <STDIN>; + chomp $ans; + $default{"TEST_TYPE"} = $ans; + } + # set any defaults foreach my $default (keys %default) { @@ -473,6 +518,69 @@ sub read_config { } } +sub __eval_option { + my ($option, $i) = @_; + + # Add space to evaluate the character before $ + $option = " $option"; + my $retval = ""; + + while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { + my $start = $1; + my $var = $2; + my $end = $3; + + # Append beginning of line + $retval = "$retval$start"; + + # If the iteration option OPT[$i] exists, then use that. + # otherwise see if the default OPT (without [$i]) exists. + + my $o = "$var\[$i\]"; + + if (defined($opt{$o})) { + $o = $opt{$o}; + $retval = "$retval$o"; + } elsif (defined($opt{$var})) { + $o = $opt{$var}; + $retval = "$retval$o"; + } else { + $retval = "$retval\$\{$var\}"; + } + + $option = $end; + } + + $retval = "$retval$option"; + + $retval =~ s/^ //; + + return $retval; +} + +sub eval_option { + my ($option, $i) = @_; + + my $prev = ""; + + # Since an option can evaluate to another option, + # keep iterating until we do not evaluate any more + # options. + my $r = 0; + while ($prev ne $option) { + # Check for recursive evaluations. + # 100 deep should be more than enough. + if ($r++ > 100) { + die "Over 100 evaluations accurred with $option\n" . + "Check for recursive variables\n"; + } + $prev = $option; + $option = __eval_option($option, $i); + } + + return $option; +} + sub _logit { if (defined($opt{"LOG_FILE"})) { open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}"; @@ -617,9 +725,15 @@ sub fail { end_monitor; } + my $name = ""; + + if (defined($test_name)) { + $name = " ($test_name)"; + } + doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; - doprint "KTEST RESULT: TEST $i Failed: ", @_, "\n"; + doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n"; doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; @@ -836,17 +950,35 @@ sub monitor { my $failure_start; my $monitor_start = time; my $done = 0; + my $version_found = 0; while (!$done) { - if ($booted) { + if ($bug && defined($stop_after_failure) && + $stop_after_failure >= 0) { + my $time = $stop_after_failure - (time - $failure_start); + $line = wait_for_input($monitor_fp, $time); + if (!defined($line)) { + doprint "bug timed out after $booted_timeout seconds\n"; + doprint "Test forced to stop after $stop_after_failure seconds after failure\n"; + last; + } + } elsif ($booted) { $line = wait_for_input($monitor_fp, $booted_timeout); + if (!defined($line)) { + my $s = $booted_timeout == 1 ? "" : "s"; + doprint "Successful boot found: break after $booted_timeout second$s\n"; + last; + } } else { $line = wait_for_input($monitor_fp); + if (!defined($line)) { + my $s = $timeout == 1 ? "" : "s"; + doprint "Timed out after $timeout second$s\n"; + last; + } } - last if (!defined($line)); - doprint $line; print DMESG $line; @@ -896,6 +1028,22 @@ sub monitor { $bug = 1; } + # Detect triple faults by testing the banner + if ($full_line =~ /\bLinux version (\S+).*\n/) { + if ($1 eq $version) { + $version_found = 1; + } elsif ($version_found && $detect_triplefault) { + # We already booted into the kernel we are testing, + # but now we booted into another kernel? + # Consider this a triple fault. + doprint "Aleady booted in Linux kernel $version, but now\n"; + doprint "we booted into Linux kernel $1.\n"; + doprint "Assuming that this is a triple fault.\n"; + doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n"; + last; + } + } + if ($line =~ /\n/) { $full_line = ""; } @@ -923,6 +1071,16 @@ sub monitor { return 1; } +sub do_post_install { + + return if (!defined($post_install)); + + my $cp_post_install = $post_install; + $cp_post_install =~ s/\$KERNEL_VERSION/$version/g; + run_command "$cp_post_install" or + dodie "Failed to run post install"; +} + sub install { run_scp "$outputdir/$build_target", "$target_image" or @@ -942,6 +1100,7 @@ sub install { close(IN); if (!$install_mods) { + do_post_install; doprint "No modules needed\n"; return; } @@ -964,17 +1123,29 @@ sub install { unlink "$tmpdir/$modtar"; - run_ssh "'(cd / && tar xf /tmp/$modtar)'" or + run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or dodie "failed to tar modules"; run_ssh "rm -f /tmp/$modtar"; - return if (!defined($post_install)); + do_post_install; +} - my $cp_post_install = $post_install; - $cp_post_install =~ s/\$KERNEL_VERSION/$version/g; - run_command "$cp_post_install" or - dodie "Failed to run post install"; +sub get_version { + # get the release name + doprint "$make kernelrelease ... "; + $version = `$make kernelrelease | tail -1`; + chomp($version); + doprint "$version\n"; +} + +sub start_monitor_and_boot { + get_grub_index; + get_version; + install; + + start_monitor; + return monitor; } sub check_buildlog { @@ -1009,24 +1180,84 @@ sub check_buildlog { return 1; } +sub apply_min_config { + my $outconfig = "$output_config.new"; + + # Read the config file and remove anything that + # is in the force_config hash (from minconfig and others) + # then add the force config back. + + doprint "Applying minimum configurations into $output_config.new\n"; + + open (OUT, ">$outconfig") or + dodie "Can't create $outconfig"; + + if (-f $output_config) { + open (IN, $output_config) or + dodie "Failed to open $output_config"; + while (<IN>) { + if (/^(# )?(CONFIG_[^\s=]*)/) { + next if (defined($force_config{$2})); + } + print OUT; + } + close IN; + } + foreach my $config (keys %force_config) { + print OUT "$force_config{$config}\n"; + } + close OUT; + + run_command "mv $outconfig $output_config"; +} + sub make_oldconfig { - my ($defconfig) = @_; - if (!run_command "$defconfig $make oldnoconfig") { + my @force_list = keys %force_config; + + if ($#force_list >= 0) { + apply_min_config; + } + + if (!run_command "$make oldnoconfig") { # Perhaps oldnoconfig doesn't exist in this version of the kernel # try a yes '' | oldconfig doprint "oldnoconfig failed, trying yes '' | make oldconfig\n"; - run_command "yes '' | $defconfig $make oldconfig" or + run_command "yes '' | $make oldconfig" or dodie "failed make config oldconfig"; } } +# read a config file and use this to force new configs. +sub load_force_config { + my ($config) = @_; + + open(IN, $config) or + dodie "failed to read $config"; + while (<IN>) { + chomp; + if (/^(CONFIG[^\s=]*)(\s*=.*)/) { + $force_config{$1} = $_; + } elsif (/^# (CONFIG_\S*) is not set/) { + $force_config{$1} = $_; + } + } + close IN; +} + sub build { my ($type) = @_; - my $defconfig = ""; unlink $buildlog; + if (defined($pre_build)) { + my $ret = run_command $pre_build; + if (!$ret && defined($pre_build_die) && + $pre_build_die) { + dodie "failed to pre_build\n"; + } + } + if ($type =~ /^useconfig:(.*)/) { run_command "cp $1 $output_config" or dodie "could not copy $1 to .config"; @@ -1063,24 +1294,33 @@ sub build { close(OUT); if (defined($minconfig)) { - $defconfig = "KCONFIG_ALLCONFIG=$minconfig"; + load_force_config($minconfig); } - if ($type eq "oldnoconfig") { - make_oldconfig $defconfig; - } else { - run_command "$defconfig $make $type" or + if ($type ne "oldnoconfig") { + run_command "$make $type" or dodie "failed make config"; } + # Run old config regardless, to enforce min configurations + make_oldconfig; $redirect = "$buildlog"; - if (!run_command "$make $build_options") { - undef $redirect; + my $build_ret = run_command "$make $build_options"; + undef $redirect; + + if (defined($post_build)) { + my $ret = run_command $post_build; + if (!$ret && defined($post_build_die) && + $post_build_die) { + dodie "failed to post_build\n"; + } + } + + if (!$build_ret) { # bisect may need this to pass return 0 if ($in_bisect); fail "failed build" and return 0; } - undef $redirect; return 1; } @@ -1102,9 +1342,15 @@ sub success { $successes++; + my $name = ""; + + if (defined($test_name)) { + $name = " ($test_name)"; + } + doprint "\n\n*******************************************\n"; doprint "*******************************************\n"; - doprint "KTEST RESULT: TEST $i SUCCESS!!!! **\n"; + doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n"; doprint "*******************************************\n"; doprint "*******************************************\n"; @@ -1117,14 +1363,6 @@ sub success { } } -sub get_version { - # get the release name - doprint "$make kernelrelease ... "; - $version = `$make kernelrelease | tail -1`; - chomp($version); - doprint "$version\n"; -} - sub answer_bisect { for (;;) { doprint "Pass or fail? [p/f]"; @@ -1289,12 +1527,7 @@ sub run_bisect_test { dodie "Failed on build" if $failed; # Now boot the box - get_grub_index; - get_version; - install; - - start_monitor; - monitor or $failed = 1; + start_monitor_and_boot or $failed = 1; if ($type ne "boot") { if ($failed && $bisect_skip) { @@ -1473,21 +1706,27 @@ my %null_config; my %dependency; -sub process_config_ignore { - my ($config) = @_; +sub assign_configs { + my ($hash, $config) = @_; open (IN, $config) or dodie "Failed to read $config"; while (<IN>) { if (/^((CONFIG\S*)=.*)/) { - $config_ignore{$2} = $1; + ${$hash}{$2} = $1; } } close(IN); } +sub process_config_ignore { + my ($config) = @_; + + assign_configs \%config_ignore, $config; +} + sub read_current_config { my ($config_ref) = @_; @@ -1546,7 +1785,7 @@ sub create_config { close(OUT); # exit; - make_oldconfig ""; + make_oldconfig; } sub compare_configs { @@ -1718,6 +1957,10 @@ sub config_bisect { my $tmpconfig = "$tmpdir/use_config"; + if (defined($config_bisect_good)) { + process_config_ignore $config_bisect_good; + } + # Make the file with the bad config and the min config if (defined($minconfig)) { # read the min config for things to ignore @@ -1727,15 +1970,8 @@ sub config_bisect { unlink $tmpconfig; } - # Add other configs - if (defined($addconfig)) { - run_command "cat $addconfig >> $tmpconfig" or - dodie "failed to append $addconfig"; - } - - my $defconfig = ""; if (-f $tmpconfig) { - $defconfig = "KCONFIG_ALLCONFIG=$tmpconfig"; + load_force_config($tmpconfig); process_config_ignore $tmpconfig; } @@ -1755,8 +1991,8 @@ sub config_bisect { } close(IN); - # Now run oldconfig with the minconfig (and addconfigs) - make_oldconfig $defconfig; + # Now run oldconfig with the minconfig + make_oldconfig; # check to see what we lost (or gained) open (IN, $output_config) @@ -1882,6 +2118,13 @@ sub patchcheck { @list = reverse @list; my $save_clean = $noclean; + my %ignored_warnings; + + if (defined($ignore_warnings)) { + foreach my $sha1 (split /\s+/, $ignore_warnings) { + $ignored_warnings{$sha1} = 1; + } + } $in_patchcheck = 1; foreach my $item (@list) { @@ -1908,18 +2151,16 @@ sub patchcheck { build "oldconfig" or return 0; } - check_buildlog $sha1 or return 0; - next if ($type eq "build"); + if (!defined($ignored_warnings{$sha1})) { + check_buildlog $sha1 or return 0; + } - get_grub_index; - get_version; - install; + next if ($type eq "build"); my $failed = 0; - start_monitor; - monitor or $failed = 1; + start_monitor_and_boot or $failed = 1; if (!$failed && $type ne "boot"){ do_run_test or $failed = 1; @@ -1936,24 +2177,505 @@ sub patchcheck { return 1; } +my %depends; +my $iflevel = 0; +my @ifdeps; + +# prevent recursion +my %read_kconfigs; + +# taken from streamline_config.pl +sub read_kconfig { + my ($kconfig) = @_; + + my $state = "NONE"; + my $config; + my @kconfigs; + + my $cont = 0; + my $line; + + + if (! -f $kconfig) { + doprint "file $kconfig does not exist, skipping\n"; + return; + } + + open(KIN, "$kconfig") + or die "Can't open $kconfig"; + while (<KIN>) { + chomp; + + # Make sure that lines ending with \ continue + if ($cont) { + $_ = $line . " " . $_; + } + + if (s/\\$//) { + $cont = 1; + $line = $_; + next; + } + + $cont = 0; + + # collect any Kconfig sources + if (/^source\s*"(.*)"/) { + $kconfigs[$#kconfigs+1] = $1; + } + + # configs found + if (/^\s*(menu)?config\s+(\S+)\s*$/) { + $state = "NEW"; + $config = $2; + + for (my $i = 0; $i < $iflevel; $i++) { + if ($i) { + $depends{$config} .= " " . $ifdeps[$i]; + } else { + $depends{$config} = $ifdeps[$i]; + } + $state = "DEP"; + } + + # collect the depends for the config + } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { + + if (defined($depends{$1})) { + $depends{$config} .= " " . $1; + } else { + $depends{$config} = $1; + } + + # Get the configs that select this config + } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { + if (defined($depends{$1})) { + $depends{$1} .= " " . $config; + } else { + $depends{$1} = $config; + } + + # Check for if statements + } elsif (/^if\s+(.*\S)\s*$/) { + my $deps = $1; + # remove beginning and ending non text + $deps =~ s/^[^a-zA-Z0-9_]*//; + $deps =~ s/[^a-zA-Z0-9_]*$//; + + my @deps = split /[^a-zA-Z0-9_]+/, $deps; + + $ifdeps[$iflevel++] = join ':', @deps; + + } elsif (/^endif/) { + + $iflevel-- if ($iflevel); + + # stop on "help" + } elsif (/^\s*help\s*$/) { + $state = "NONE"; + } + } + close(KIN); + + # read in any configs that were found. + foreach $kconfig (@kconfigs) { + if (!defined($read_kconfigs{$kconfig})) { + $read_kconfigs{$kconfig} = 1; + read_kconfig("$builddir/$kconfig"); + } + } +} + +sub read_depends { + # find out which arch this is by the kconfig file + open (IN, $output_config) + or dodie "Failed to read $output_config"; + my $arch; + while (<IN>) { + if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) { + $arch = $1; + last; + } + } + close IN; + + if (!defined($arch)) { + doprint "Could not find arch from config file\n"; + doprint "no dependencies used\n"; + return; + } + + # arch is really the subarch, we need to know + # what directory to look at. + if ($arch eq "i386" || $arch eq "x86_64") { + $arch = "x86"; + } elsif ($arch =~ /^tile/) { + $arch = "tile"; + } + + my $kconfig = "$builddir/arch/$arch/Kconfig"; + + if (! -f $kconfig && $arch =~ /\d$/) { + my $orig = $arch; + # some subarchs have numbers, truncate them + $arch =~ s/\d*$//; + $kconfig = "$builddir/arch/$arch/Kconfig"; + if (! -f $kconfig) { + doprint "No idea what arch dir $orig is for\n"; + doprint "no dependencies used\n"; + return; + } + } + + read_kconfig($kconfig); +} + +sub read_config_list { + my ($config) = @_; + + open (IN, $config) + or dodie "Failed to read $config"; + + while (<IN>) { + if (/^((CONFIG\S*)=.*)/) { + if (!defined($config_ignore{$2})) { + $config_list{$2} = $1; + } + } + } + + close(IN); +} + +sub read_output_config { + my ($config) = @_; + + assign_configs \%config_ignore, $config; +} + +sub make_new_config { + my @configs = @_; + + open (OUT, ">$output_config") + or dodie "Failed to write $output_config"; + + foreach my $config (@configs) { + print OUT "$config\n"; + } + close OUT; +} + +sub get_depends { + my ($dep) = @_; + + my $kconfig = $dep; + $kconfig =~ s/CONFIG_//; + + $dep = $depends{"$kconfig"}; + + # the dep string we have saves the dependencies as they + # were found, including expressions like ! && ||. We + # want to split this out into just an array of configs. + + my $valid = "A-Za-z_0-9"; + + my @configs; + + while ($dep =~ /[$valid]/) { + + if ($dep =~ /^[^$valid]*([$valid]+)/) { + my $conf = "CONFIG_" . $1; + + $configs[$#configs + 1] = $conf; + + $dep =~ s/^[^$valid]*[$valid]+//; + } else { + die "this should never happen"; + } + } + + return @configs; +} + +my %min_configs; +my %keep_configs; +my %save_configs; +my %processed_configs; +my %nochange_config; + +sub test_this_config { + my ($config) = @_; + + my $found; + + # if we already processed this config, skip it + if (defined($processed_configs{$config})) { + return undef; + } + $processed_configs{$config} = 1; + + # if this config failed during this round, skip it + if (defined($nochange_config{$config})) { + return undef; + } + + my $kconfig = $config; + $kconfig =~ s/CONFIG_//; + + # Test dependencies first + if (defined($depends{"$kconfig"})) { + my @parents = get_depends $config; + foreach my $parent (@parents) { + # if the parent is in the min config, check it first + next if (!defined($min_configs{$parent})); + $found = test_this_config($parent); + if (defined($found)) { + return $found; + } + } + } + + # Remove this config from the list of configs + # do a make oldnoconfig and then read the resulting + # .config to make sure it is missing the config that + # we had before + my %configs = %min_configs; + delete $configs{$config}; + make_new_config ((values %configs), (values %keep_configs)); + make_oldconfig; + undef %configs; + assign_configs \%configs, $output_config; + + return $config if (!defined($configs{$config})); + + doprint "disabling config $config did not change .config\n"; + + $nochange_config{$config} = 1; + + return undef; +} + +sub make_min_config { + my ($i) = @_; + + if (!defined($output_minconfig)) { + fail "OUTPUT_MIN_CONFIG not defined" and return; + } + + # If output_minconfig exists, and the start_minconfig + # came from min_config, than ask if we should use + # that instead. + if (-f $output_minconfig && !$start_minconfig_defined) { + print "$output_minconfig exists\n"; + if (read_yn " Use it as minconfig?") { + $start_minconfig = $output_minconfig; + } + } + + if (!defined($start_minconfig)) { + fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return; + } + + my $temp_config = "$tmpdir/temp_config"; + + # First things first. We build an allnoconfig to find + # out what the defaults are that we can't touch. + # Some are selections, but we really can't handle selections. + + my $save_minconfig = $minconfig; + undef $minconfig; + + run_command "$make allnoconfig" or return 0; + + read_depends; + + process_config_ignore $output_config; + + undef %save_configs; + undef %min_configs; + + if (defined($ignore_config)) { + # make sure the file exists + `touch $ignore_config`; + assign_configs \%save_configs, $ignore_config; + } + + %keep_configs = %save_configs; + + doprint "Load initial configs from $start_minconfig\n"; + + # Look at the current min configs, and save off all the + # ones that were set via the allnoconfig + assign_configs \%min_configs, $start_minconfig; + + my @config_keys = keys %min_configs; + + # Remove anything that was set by the make allnoconfig + # we shouldn't need them as they get set for us anyway. + foreach my $config (@config_keys) { + # Remove anything in the ignore_config + if (defined($keep_configs{$config})) { + my $file = $ignore_config; + $file =~ s,.*/(.*?)$,$1,; + doprint "$config set by $file ... ignored\n"; + delete $min_configs{$config}; + next; + } + # But make sure the settings are the same. If a min config + # sets a selection, we do not want to get rid of it if + # it is not the same as what we have. Just move it into + # the keep configs. + if (defined($config_ignore{$config})) { + if ($config_ignore{$config} ne $min_configs{$config}) { + doprint "$config is in allnoconfig as '$config_ignore{$config}'"; + doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n"; + $keep_configs{$config} = $min_configs{$config}; + } else { + doprint "$config set by allnoconfig ... ignored\n"; + } + delete $min_configs{$config}; + } + } + + my $done = 0; + my $take_two = 0; + + while (!$done) { + + my $config; + my $found; + + # Now disable each config one by one and do a make oldconfig + # till we find a config that changes our list. + + # Put configs that did not modify the config at the end. + my @test_configs = keys %min_configs; + my $reset = 1; + for (my $i = 0; $i < $#test_configs; $i++) { + if (!defined($nochange_config{$test_configs[0]})) { + $reset = 0; + last; + } + # This config didn't change the .config last time. + # Place it at the end + my $config = shift @test_configs; + push @test_configs, $config; + } + + # if every test config has failed to modify the .config file + # in the past, then reset and start over. + if ($reset) { + undef %nochange_config; + } + + undef %processed_configs; + + foreach my $config (@test_configs) { + + $found = test_this_config $config; + + last if (defined($found)); + + # oh well, try another config + } + + if (!defined($found)) { + # we could have failed due to the nochange_config hash + # reset and try again + if (!$take_two) { + undef %nochange_config; + $take_two = 1; + next; + } + doprint "No more configs found that we can disable\n"; + $done = 1; + last; + } + $take_two = 0; + + $config = $found; + + doprint "Test with $config disabled\n"; + + # set in_bisect to keep build and monitor from dieing + $in_bisect = 1; + + my $failed = 0; + build "oldconfig"; + start_monitor_and_boot or $failed = 1; + end_monitor; + + $in_bisect = 0; + + if ($failed) { + doprint "$min_configs{$config} is needed to boot the box... keeping\n"; + # this config is needed, add it to the ignore list. + $keep_configs{$config} = $min_configs{$config}; + $save_configs{$config} = $min_configs{$config}; + delete $min_configs{$config}; + + # update new ignore configs + if (defined($ignore_config)) { + open (OUT, ">$temp_config") + or die "Can't write to $temp_config"; + foreach my $config (keys %save_configs) { + print OUT "$save_configs{$config}\n"; + } + close OUT; + run_command "mv $temp_config $ignore_config" or + dodie "failed to copy update to $ignore_config"; + } + + } else { + # We booted without this config, remove it from the minconfigs. + doprint "$config is not needed, disabling\n"; + + delete $min_configs{$config}; + + # Also disable anything that is not enabled in this config + my %configs; + assign_configs \%configs, $output_config; + my @config_keys = keys %min_configs; + foreach my $config (@config_keys) { + if (!defined($configs{$config})) { + doprint "$config is not set, disabling\n"; + delete $min_configs{$config}; + } + } + + # Save off all the current mandidory configs + open (OUT, ">$temp_config") + or die "Can't write to $temp_config"; + foreach my $config (keys %keep_configs) { + print OUT "$keep_configs{$config}\n"; + } + foreach my $config (keys %min_configs) { + print OUT "$min_configs{$config}\n"; + } + close OUT; + + run_command "mv $temp_config $output_minconfig" or + dodie "failed to copy update to $output_minconfig"; + } + + doprint "Reboot and wait $sleep_time seconds\n"; + reboot; + start_monitor; + wait_for_monitor $sleep_time; + end_monitor; + } + + success $i; + return 1; +} + $#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n"; if ($#ARGV == 0) { $ktest_config = $ARGV[0]; if (! -f $ktest_config) { print "$ktest_config does not exist.\n"; - my $ans; - for (;;) { - print "Create it? [Y/n] "; - $ans = <STDIN>; - chomp $ans; - if ($ans =~ /^\s*$/) { - $ans = "y"; - } - last if ($ans =~ /^y$/i || $ans =~ /^n$/i); - print "Please answer either 'y' or 'n'.\n"; - } - if ($ans !~ /^y$/i) { + if (!read_yn "Create it?") { exit 0; } } @@ -1977,6 +2699,10 @@ EOF } read_config $ktest_config; +if (defined($opt{"LOG_FILE"})) { + $opt{"LOG_FILE"} = eval_option($opt{"LOG_FILE"}, -1); +} + # Append any configs entered in manually to the config file. my @new_configs = keys %entered_configs; if ($#new_configs >= 0) { @@ -2045,70 +2771,13 @@ sub __set_test_option { return undef; } -sub eval_option { - my ($option, $i) = @_; - - # Add space to evaluate the character before $ - $option = " $option"; - my $retval = ""; - - while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) { - my $start = $1; - my $var = $2; - my $end = $3; - - # Append beginning of line - $retval = "$retval$start"; - - # If the iteration option OPT[$i] exists, then use that. - # otherwise see if the default OPT (without [$i]) exists. - - my $o = "$var\[$i\]"; - - if (defined($opt{$o})) { - $o = $opt{$o}; - $retval = "$retval$o"; - } elsif (defined($opt{$var})) { - $o = $opt{$var}; - $retval = "$retval$o"; - } else { - $retval = "$retval\$\{$var\}"; - } - - $option = $end; - } - - $retval = "$retval$option"; - - $retval =~ s/^ //; - - return $retval; -} - sub set_test_option { my ($name, $i) = @_; my $option = __set_test_option($name, $i); return $option if (!defined($option)); - my $prev = ""; - - # Since an option can evaluate to another option, - # keep iterating until we do not evaluate any more - # options. - my $r = 0; - while ($prev ne $option) { - # Check for recursive evaluations. - # 100 deep should be more than enough. - if ($r++ > 100) { - die "Over 100 evaluations accurred with $name\n" . - "Check for recursive variables\n"; - } - $prev = $option; - $option = eval_option($option, $i); - } - - return $option; + return eval_option($option, $i); } # First we need to do is the builds @@ -2126,10 +2795,17 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $test_type = set_test_option("TEST_TYPE", $i); $build_type = set_test_option("BUILD_TYPE", $i); $build_options = set_test_option("BUILD_OPTIONS", $i); + $pre_build = set_test_option("PRE_BUILD", $i); + $post_build = set_test_option("POST_BUILD", $i); + $pre_build_die = set_test_option("PRE_BUILD_DIE", $i); + $post_build_die = set_test_option("POST_BUILD_DIE", $i); $power_cycle = set_test_option("POWER_CYCLE", $i); $reboot = set_test_option("REBOOT", $i); $noclean = set_test_option("BUILD_NOCLEAN", $i); $minconfig = set_test_option("MIN_CONFIG", $i); + $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i); + $start_minconfig = set_test_option("START_MIN_CONFIG", $i); + $ignore_config = set_test_option("IGNORE_CONFIG", $i); $run_test = set_test_option("TEST", $i); $addconfig = set_test_option("ADD_CONFIG", $i); $reboot_type = set_test_option("REBOOT_TYPE", $i); @@ -2145,12 +2821,16 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $sleep_time = set_test_option("SLEEP_TIME", $i); $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i); $patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i); + $ignore_warnings = set_test_option("IGNORE_WARNINGS", $i); $bisect_manual = set_test_option("BISECT_MANUAL", $i); $bisect_skip = set_test_option("BISECT_SKIP", $i); + $config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i); $store_failures = set_test_option("STORE_FAILURES", $i); + $test_name = set_test_option("TEST_NAME", $i); $timeout = set_test_option("TIMEOUT", $i); $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i); $console = set_test_option("CONSOLE", $i); + $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i); $success_line = set_test_option("SUCCESS_LINE", $i); $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i); $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i); @@ -2161,6 +2841,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $target_image = set_test_option("TARGET_IMAGE", $i); $localversion = set_test_option("LOCALVERSION", $i); + $start_minconfig_defined = 1; + + if (!defined($start_minconfig)) { + $start_minconfig_defined = 0; + $start_minconfig = $minconfig; + } + chdir $builddir || die "can't change directory to $builddir"; if (!-d $tmpdir) { @@ -2193,6 +2880,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = $opt{"CONFIG_BISECT_TYPE[$i]"}; } + if ($test_type eq "make_min_config") { + $run_type = ""; + } + # mistake in config file? if (!defined($run_type)) { $run_type = "ERROR"; @@ -2204,11 +2895,12 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { unlink $dmesg; unlink $buildlog; - if (!defined($minconfig)) { - $minconfig = $addconfig; - - } elsif (defined($addconfig)) { - run_command "cat $addconfig $minconfig > $tmpdir/add_config" or + if (defined($addconfig)) { + my $min = $minconfig; + if (!defined($minconfig)) { + $min = ""; + } + run_command "cat $addconfig $min > $tmpdir/add_config" or dodie "Failed to create temp config"; $minconfig = "$tmpdir/add_config"; } @@ -2228,6 +2920,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { } elsif ($test_type eq "patchcheck") { patchcheck $i; next; + } elsif ($test_type eq "make_min_config") { + make_min_config $i; + next; } if ($build_type ne "nobuild") { @@ -2235,13 +2930,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { } if ($test_type ne "build") { - get_grub_index; - get_version; - install; - my $failed = 0; - start_monitor; - monitor or $failed = 1;; + start_monitor_and_boot or $failed = 1; if (!$failed && $test_type ne "boot" && defined($run_test)) { do_run_test or $failed = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 48cbcc80..b8bcd14 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -293,6 +293,38 @@ # or on some systems: #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION +# If there is a script that you require to run before the build is done +# you can specify it with PRE_BUILD. +# +# One example may be if you must add a temporary patch to the build to +# fix a unrelated bug to perform a patchcheck test. This will apply the +# patch before each build that is made. Use the POST_BUILD to do a git reset --hard +# to remove the patch. +# +# (default undef) +#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch + +# To specify if the test should fail if the PRE_BUILD fails, +# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD +# result is ignored. +# (default 0) +# PRE_BUILD_DIE = 1 + +# If there is a script that should run after the build is done +# you can specify it with POST_BUILD. +# +# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications +# made by the PRE_BUILD. +# +# (default undef) +#POST_BUILD = cd ${BUILD_DIR} && git reset --hard + +# To specify if the test should fail if the POST_BUILD fails, +# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD +# result is ignored. +# (default 0) +#POST_BUILD_DIE = 1 + # Way to reboot the box to the test kernel. # Only valid options so far are "grub" and "script" # (default grub) @@ -360,8 +392,8 @@ #ADD_CONFIG = /home/test/config-broken # The location on the host where to write temp files -# (default /tmp/ktest) -#TMP_DIR = /tmp/ktest +# (default /tmp/ktest/${MACHINE}) +#TMP_DIR = /tmp/ktest/${MACHINE} # Optional log file to write the status (recommended) # Note, this is a DEFAULT section only option. @@ -518,6 +550,16 @@ # The variables SSH_USER and MACHINE are defined. #REBOOT = ssh $SSH_USER@$MACHINE reboot +# The way triple faults are detected is by testing the kernel +# banner. If the kernel banner for the kernel we are testing is +# found, and then later a kernel banner for another kernel version +# is found, it is considered that we encountered a triple fault, +# and there is no panic or callback, but simply a reboot. +# To disable this (because it did a false positive) set the following +# to 0. +# (default 1) +#DETECT_TRIPLE_FAULT = 0 + #### Per test run options #### # The following options are only allowed in TEST_START sections. # They are ignored in the DEFAULTS sections. @@ -535,6 +577,12 @@ # all preceding tests until a new CHECKOUT is set. # # +# TEST_NAME = name +# +# If you want the test to have a name that is displayed in +# the test result banner at the end of the test, then use this +# option. This is useful to search for the RESULT keyword and +# not have to translate a test number to a test in the config. # # For TEST_TYPE = patchcheck # @@ -556,7 +604,12 @@ # build, boot, test. # # Note, the build test will look for warnings, if a warning occurred -# in a file that a commit touches, the build will fail. +# in a file that a commit touches, the build will fail, unless +# IGNORE_WARNINGS is set for the given commit's sha1 +# +# IGNORE_WARNINGS can be used to disable the failure of patchcheck +# on a particuler commit (SHA1). You can add more than one commit +# by adding a list of SHA1s that are space delimited. # # If BUILD_NOCLEAN is set, then make mrproper will not be run on # any of the builds, just like all other TEST_TYPE tests. But @@ -571,6 +624,7 @@ # PATCHCHECK_TYPE = boot # PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7 # PATCHCHECK_END = HEAD~2 +# IGNORE_WARNINGS = 42f9c6b69b54946ffc0515f57d01dc7f5c0e4712 0c17ca2c7187f431d8ffc79e81addc730f33d128 # # # @@ -739,13 +793,18 @@ # boot - bad builds but fails to boot # test - bad boots but fails a test # -# CONFIG_BISECT is the config that failed to boot +# CONFIG_BISECT is the config that failed to boot # -# If BISECT_MANUAL is set, it will pause between iterations. -# This is useful to use just ktest.pl just for the config bisect. -# If you set it to build, it will run the bisect and you can -# control what happens in between iterations. It will ask you if -# the test succeeded or not and continue the config bisect. +# If BISECT_MANUAL is set, it will pause between iterations. +# This is useful to use just ktest.pl just for the config bisect. +# If you set it to build, it will run the bisect and you can +# control what happens in between iterations. It will ask you if +# the test succeeded or not and continue the config bisect. +# +# CONFIG_BISECT_GOOD (optional) +# If you have a good config to start with, then you +# can specify it with CONFIG_BISECT_GOOD. Otherwise +# the MIN_CONFIG is the base. # # Example: # TEST_START @@ -755,3 +814,68 @@ # MIN_CONFIG = /home/test/config-min # BISECT_MANUAL = 1 # +# +# +# For TEST_TYPE = make_min_config +# +# After doing a make localyesconfig, your kernel configuration may +# not be the most useful minimum configuration. Having a true minimum +# config that you can use against other configs is very useful if +# someone else has a config that breaks on your code. By only forcing +# those configurations that are truly required to boot your machine +# will give you less of a chance that one of your set configurations +# will make the bug go away. This will give you a better chance to +# be able to reproduce the reported bug matching the broken config. +# +# Note, this does take some time, and may require you to run the +# test over night, or perhaps over the weekend. But it also allows +# you to interrupt it, and gives you the current minimum config +# that was found till that time. +# +# Note, this test automatically assumes a BUILD_TYPE of oldconfig +# and its test type acts like boot. +# TODO: add a test version that makes the config do more than just +# boot, like having network access. +# +# To save time, the test does not just grab any option and test +# it. The Kconfig files are examined to determine the dependencies +# of the configs. If a config is chosen that depends on another +# config, that config will be checked first. By checking the +# parents first, we can eliminate whole groups of configs that +# may have been enabled. +# +# For example, if a USB device config is chosen and depends on CONFIG_USB, +# the CONFIG_USB will be tested before the device. If CONFIG_USB is +# found not to be needed, it, as well as all configs that depend on +# it, will be disabled and removed from the current min_config. +# +# OUTPUT_MIN_CONFIG is the path and filename of the file that will +# be created from the MIN_CONFIG. If you interrupt the test, set +# this file as your new min config, and use it to continue the test. +# This file does not need to exist on start of test. +# This file is not created until a config is found that can be removed. +# If this file exists, you will be prompted if you want to use it +# as the min_config (overriding MIN_CONFIG) if START_MIN_CONFIG +# is not defined. +# (required field) +# +# START_MIN_CONFIG is the config to use to start the test with. +# you can set this as the same OUTPUT_MIN_CONFIG, but if you do +# the OUTPUT_MIN_CONFIG file must exist. +# (default MIN_CONFIG) +# +# IGNORE_CONFIG is used to specify a config file that has configs that +# you already know must be set. Configs are written here that have +# been tested and proved to be required. It is best to define this +# file if you intend on interrupting the test and running it where +# it left off. New configs that it finds will be written to this file +# and will not be tested again in later runs. +# (optional) +# +# Example: +# +# TEST_TYPE = make_min_config +# OUTPUT_MIN_CONFIG = /path/to/config-new-min +# START_MIN_CONFIG = /path/to/config-min +# IGNORE_CONFIG = /path/to/config-tested +# |