diff options
Diffstat (limited to 'tools')
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 167 | ||||
| -rw-r--r-- | tools/testing/ktest/sample.conf | 52 |
2 files changed, 215 insertions, 4 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 292b13a..52b7959 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -52,6 +52,7 @@ my %default = ( "STOP_AFTER_SUCCESS" => 10, "STOP_AFTER_FAILURE" => 60, "STOP_TEST_AFTER" => 600, + "MAX_MONITOR_WAIT" => 1800, # required, and we will ask users if they don't have them but we keep the default # value something that is common. @@ -77,6 +78,11 @@ my $output_config; my $test_type; my $build_type; my $build_options; +my $final_post_ktest; +my $pre_ktest; +my $post_ktest; +my $pre_test; +my $post_test; my $pre_build; my $post_build; my $pre_build_die; @@ -93,6 +99,7 @@ my $reboot_on_success; my $die_on_failure; my $powercycle_after_reboot; my $poweroff_after_halt; +my $max_monitor_wait; my $ssh_exec; my $scp_to_target; my $scp_to_target_install; @@ -101,6 +108,7 @@ my $grub_menu; my $grub_number; my $target; my $make; +my $pre_install; my $post_install; my $no_install; my $noclean; @@ -167,6 +175,7 @@ my $bisect_check; my $config_bisect; my $config_bisect_type; +my $config_bisect_check; my $patchcheck_type; my $patchcheck_start; @@ -182,6 +191,9 @@ my $newconfig = 0; my %entered_configs; my %config_help; my %variable; + +# force_config is the list of configs that we force enabled (or disabled) +# in a .config file. The MIN_CONFIG and ADD_CONFIG configs. my %force_config; # do not force reboots on config problems @@ -197,6 +209,10 @@ my %option_map = ( "OUTPUT_DIR" => \$outputdir, "BUILD_DIR" => \$builddir, "TEST_TYPE" => \$test_type, + "PRE_KTEST" => \$pre_ktest, + "POST_KTEST" => \$post_ktest, + "PRE_TEST" => \$pre_test, + "POST_TEST" => \$post_test, "BUILD_TYPE" => \$build_type, "BUILD_OPTIONS" => \$build_options, "PRE_BUILD" => \$pre_build, @@ -216,6 +232,7 @@ my %option_map = ( "ADD_CONFIG" => \$addconfig, "REBOOT_TYPE" => \$reboot_type, "GRUB_MENU" => \$grub_menu, + "PRE_INSTALL" => \$pre_install, "POST_INSTALL" => \$post_install, "NO_INSTALL" => \$no_install, "REBOOT_SCRIPT" => \$reboot_script, @@ -228,6 +245,7 @@ my %option_map = ( "POWER_OFF" => \$power_off, "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot, "POWEROFF_AFTER_HALT" => \$poweroff_after_halt, + "MAX_MONITOR_WAIT" => \$max_monitor_wait, "SLEEP_TIME" => \$sleep_time, "BISECT_SLEEP_TIME" => \$bisect_sleep_time, "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time, @@ -272,6 +290,7 @@ my %option_map = ( "CONFIG_BISECT" => \$config_bisect, "CONFIG_BISECT_TYPE" => \$config_bisect_type, + "CONFIG_BISECT_CHECK" => \$config_bisect_check, "PATCHCHECK_TYPE" => \$patchcheck_type, "PATCHCHECK_START" => \$patchcheck_start, @@ -604,6 +623,10 @@ sub process_compare { return $lval eq $rval; } elsif ($cmp eq "!=") { return $lval ne $rval; + } elsif ($cmp eq "=~") { + return $lval =~ m/$rval/; + } elsif ($cmp eq "!~") { + return $lval !~ m/$rval/; } my $statement = "$lval $cmp $rval"; @@ -659,7 +682,7 @@ sub process_expression { } } - if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { + if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) { my $ret = process_compare($1, $2, $3); if ($ret < 0) { die "$name: $.: Unable to process comparison\n"; @@ -1117,7 +1140,11 @@ sub reboot { } if (defined($time)) { - wait_for_monitor($time, $reboot_success_line); + if (wait_for_monitor($time, $reboot_success_line)) { + # reboot got stuck? + doprint "Reboot did not finish. Forcing power cycle\n"; + run_command "$power_cycle"; + } end_monitor; } } @@ -1212,6 +1239,11 @@ sub wait_for_monitor { my $full_line = ""; my $line; my $booted = 0; + my $start_time = time; + my $skip_call_trace = 0; + my $bug = 0; + my $bug_ignored = 0; + my $now; doprint "** Wait for monitor to settle down **\n"; @@ -1227,11 +1259,39 @@ sub wait_for_monitor { $booted = 1; } + if ($full_line =~ /\[ backtrace testing \]/) { + $skip_call_trace = 1; + } + + if ($full_line =~ /call trace:/i) { + if (!$bug && !$skip_call_trace) { + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + } + } + } + + if ($full_line =~ /\[ end of backtrace testing \]/) { + $skip_call_trace = 0; + } + + if ($full_line =~ /Kernel panic -/) { + $bug = 1; + } + if ($line =~ /\n/) { $full_line = ""; } + $now = time; + if ($now - $start_time >= $max_monitor_wait) { + doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n"; + return 1; + } } print "** Monitor flushed **\n"; + return $bug; } sub save_logs { @@ -1273,6 +1333,10 @@ sub save_logs { sub fail { + if (defined($post_test)) { + run_command $post_test; + } + if ($die_on_failure) { dodie @_; } @@ -1656,6 +1720,12 @@ sub install { return if ($no_install); + if (defined($pre_install)) { + my $cp_pre_install = eval_kernel_version $pre_install; + run_command "$cp_pre_install" or + dodie "Failed to run pre install"; + } + my $cp_target = eval_kernel_version $target_image; run_scp_install "$outputdir/$build_target", "$cp_target" or @@ -1814,6 +1884,7 @@ sub make_oldconfig { sub load_force_config { my ($config) = @_; + doprint "Loading force configs from $config\n"; open(IN, $config) or dodie "failed to read $config"; while (<IN>) { @@ -1937,6 +2008,10 @@ sub halt { sub success { my ($i) = @_; + if (defined($post_test)) { + run_command $post_test; + } + $successes++; my $name = ""; @@ -2003,6 +2078,7 @@ sub do_run_test { my $line; my $full_line; my $bug = 0; + my $bug_ignored = 0; wait_for_monitor 1; @@ -2027,7 +2103,11 @@ sub do_run_test { doprint $line; if ($full_line =~ /call trace:/i) { - $bug = 1; + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + } } if ($full_line =~ /Kernel panic -/) { @@ -2040,6 +2120,10 @@ sub do_run_test { } } while (!$child_done && !$bug); + if (!$bug && $bug_ignored) { + doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n"; + } + if ($bug) { my $failure_start = time; my $now; @@ -2362,9 +2446,24 @@ sub bisect { success $i; } +# config_ignore holds the configs that were set (or unset) for +# a good config and we will ignore these configs for the rest +# of a config bisect. These configs stay as they were. my %config_ignore; + +# config_set holds what all configs were set as. my %config_set; +# config_off holds the set of configs that the bad config had disabled. +# We need to record them and set them in the .config when running +# oldnoconfig, because oldnoconfig does not turn off new symbols, but +# instead just keeps the defaults. +my %config_off; + +# config_off_tmp holds a set of configs to turn off for now +my @config_off_tmp; + +# config_list is the set of configs that are being tested my %config_list; my %null_config; @@ -2443,12 +2542,21 @@ sub create_config { } } + # turn off configs to keep off + foreach my $config (keys %config_off) { + print OUT "# $config is not set\n"; + } + + # turn off configs that should be off for now + foreach my $config (@config_off_tmp) { + print OUT "# $config is not set\n"; + } + foreach my $config (keys %config_ignore) { print OUT "$config_ignore{$config}\n"; } close(OUT); -# exit; make_oldconfig; } @@ -2525,6 +2633,13 @@ sub run_config_bisect { do { my @tophalf = @start_list[0 .. $half]; + # keep the bottom half off + if ($half < $#start_list) { + @config_off_tmp = @start_list[$half + 1 .. $#start_list]; + } else { + @config_off_tmp = (); + } + create_config @tophalf; read_current_config \%current_config; @@ -2541,7 +2656,11 @@ sub run_config_bisect { if (!$found) { # try the other half doprint "Top half produced no set configs, trying bottom half\n"; + + # keep the top half off + @config_off_tmp = @tophalf; @tophalf = @start_list[$half + 1 .. $#start_list]; + create_config @tophalf; read_current_config \%current_config; foreach my $config (@tophalf) { @@ -2679,6 +2798,10 @@ sub config_bisect { $added_configs{$2} = $1; $config_list{$2} = $1; } + } elsif (/^# ((CONFIG\S*).*)/) { + # Keep these configs disabled + $config_set{$2} = $1; + $config_off{$2} = $1; } } close(IN); @@ -2701,6 +2824,8 @@ sub config_bisect { my %config_test; my $once = 0; + @config_off_tmp = (); + # Sometimes kconfig does weird things. We must make sure # that the config we autocreate has everything we need # to test, otherwise we may miss testing configs, or @@ -2719,6 +2844,18 @@ sub config_bisect { } } my $ret; + + if (defined($config_bisect_check) && $config_bisect_check) { + doprint " Checking to make sure bad config with min config fails\n"; + create_config keys %config_list; + $ret = run_config_bisect_test $config_bisect_type; + if ($ret) { + doprint " FAILED! Bad config with min config boots fine\n"; + return -1; + } + doprint " Bad config with min config fails as expected\n"; + } + do { $ret = run_config_bisect; } while (!$ret); @@ -3510,6 +3647,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $iteration = $i; + undef %force_config; + my $makecmd = set_test_option("MAKE_CMD", $i); # Load all the options into their mapped variable names @@ -3519,6 +3658,18 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $start_minconfig_defined = 1; + # The first test may override the PRE_KTEST option + if (defined($pre_ktest) && $i == 1) { + doprint "\n"; + run_command $pre_ktest; + } + + # Any test can override the POST_KTEST option + # The last test takes precedence. + if (defined($post_ktest)) { + $final_post_ktest = $post_ktest; + } + if (!defined($start_minconfig)) { $start_minconfig_defined = 0; $start_minconfig = $minconfig; @@ -3573,6 +3724,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { doprint "\n\n"; doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n"; + if (defined($pre_test)) { + run_command $pre_test; + } + unlink $dmesg; unlink $buildlog; unlink $testlog; @@ -3638,6 +3793,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { success $i; } +if (defined($final_post_ktest)) { + run_command $final_post_ktest; +} + if ($opt{"POWEROFF_ON_SUCCESS"}) { halt; } elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index cf362b3..de28a0a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -376,6 +376,24 @@ # DEFAULTS # DEFAULTS SKIP +# If you want to execute some command before the first test runs +# you can set this option. Note, it can be set as a default option +# or an option in the first test case. All other test cases will +# ignore it. If both the default and first test have this option +# set, then the first test will take precedence. +# +# default (undefined) +#PRE_KTEST = ${SSH} ~/set_up_test + +# If you want to execute some command after all the tests have +# completed, you can set this option. Note, it can be set as a +# default or any test case can override it. If multiple test cases +# set this option, then the last test case that set it will take +# precedence +# +# default (undefined) +#POST_KTEST = ${SSH} ~/dismantle_test + # The default test type (default test) # The test types may be: # build - only build the kernel, do nothing else @@ -408,6 +426,14 @@ # (default "") #BUILD_OPTIONS = -j20 +# If you need to do some special handling before installing +# you can add a script with this option. +# The environment variable KERNEL_VERSION will be set to the +# kernel version that is used. +# +# default (undefined) +#PRE_INSTALL = ssh user@target rm -rf '/lib/modules/*-test*' + # If you need an initrd, you can add a script or code here to install # it. The environment variable KERNEL_VERSION will be set to the # kernel version that is used. Remember to add the initrd line @@ -426,6 +452,18 @@ # (default 0) #NO_INSTALL = 1 +# If there is a command that you want to run before the individual test +# case executes, then you can set this option +# +# default (undefined) +#PRE_TEST = ${SSH} reboot_to_special_kernel + +# If there is a command you want to run after the individual test case +# completes, then you can set this option. +# +# default (undefined) +#POST_TEST = cd ${BUILD_DIR}; git reset --hard + # If there is a script that you require to run before the build is done # you can specify it with PRE_BUILD. # @@ -657,6 +695,14 @@ # (default 60) #BISECT_SLEEP_TIME = 60 +# The max wait time (in seconds) for waiting for the console to finish. +# If for some reason, the console is outputting content without +# ever finishing, this will cause ktest to get stuck. This +# option is the max time ktest will wait for the monitor (console) +# to settle down before continuing. +# (default 1800) +#MAX_MONITOR_WAIT + # The time in between patch checks to sleep (in seconds) # (default 60) #PATCHCHECK_SLEEP_TIME = 60 @@ -1039,6 +1085,12 @@ # can specify it with CONFIG_BISECT_GOOD. Otherwise # the MIN_CONFIG is the base. # +# CONFIG_BISECT_CHECK (optional) +# Set this to 1 if you want to confirm that the config ktest +# generates (the bad config with the min config) is still bad. +# It may be that the min config fixes what broke the bad config +# and the test will not return a result. +# # Example: # TEST_START # TEST_TYPE = config_bisect |
