diff options
Diffstat (limited to 'tools/testing')
| -rw-r--r-- | tools/testing/fault-injection/failcmd.sh | 219 | ||||
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 167 | ||||
| -rw-r--r-- | tools/testing/ktest/sample.conf | 52 | ||||
| -rw-r--r-- | tools/testing/selftests/Makefile | 2 | ||||
| -rw-r--r-- | tools/testing/selftests/cpu-hotplug/Makefile | 6 | ||||
| -rw-r--r-- | tools/testing/selftests/cpu-hotplug/on-off-test.sh | 221 | ||||
| -rw-r--r-- | tools/testing/selftests/memory-hotplug/Makefile | 6 | ||||
| -rw-r--r-- | tools/testing/selftests/memory-hotplug/on-off-test.sh | 230 |
8 files changed, 898 insertions, 5 deletions
diff --git a/tools/testing/fault-injection/failcmd.sh b/tools/testing/fault-injection/failcmd.sh new file mode 100644 index 0000000..1776e92 --- /dev/null +++ b/tools/testing/fault-injection/failcmd.sh @@ -0,0 +1,219 @@ +#!/bin/bash +# +# NAME +# failcmd.sh - run a command with injecting slab/page allocation failures +# +# SYNOPSIS +# failcmd.sh --help +# failcmd.sh [<options>] command [arguments] +# +# DESCRIPTION +# Run command with injecting slab/page allocation failures by fault +# injection. +# +# NOTE: you need to run this script as root. +# + +usage() +{ + cat >&2 <<EOF +Usage: $0 [options] command [arguments] + +OPTIONS + -p percent + --probability=percent + likelihood of failure injection, in percent. + Default value is 1 + + -t value + --times=value + specifies how many times failures may happen at most. + Default value is 1 + + --oom-kill-allocating-task=value + set /proc/sys/vm/oom_kill_allocating_task to specified value + before running the command. + Default value is 1 + + -h, --help + Display a usage message and exit + + --interval=value, --space=value, --verbose=value, --task-filter=value, + --stacktrace-depth=value, --require-start=value, --require-end=value, + --reject-start=value, --reject-end=value, --ignore-gfp-wait=value + See Documentation/fault-injection/fault-injection.txt for more + information + + failslab options: + --cache-filter=value + + fail_page_alloc options: + --ignore-gfp-highmem=value, --min-order=value + +ENVIRONMENT + FAILCMD_TYPE + The following values for FAILCMD_TYPE are recognized: + + failslab + inject slab allocation failures + fail_page_alloc + inject page allocation failures + + If FAILCMD_TYPE is not defined, then failslab is used. +EOF +} + +if [ $UID != 0 ]; then + echo must be run as root >&2 + exit 1 +fi + +DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3}'` + +if [ ! -d "$DEBUGFS" ]; then + echo debugfs is not mounted >&2 + exit 1 +fi + +FAILCMD_TYPE=${FAILCMD_TYPE:-failslab} +FAULTATTR=$DEBUGFS/$FAILCMD_TYPE + +if [ ! -d $FAULTATTR ]; then + echo $FAILCMD_TYPE is not available >&2 + exit 1 +fi + +LONGOPTS=probability:,interval:,times:,space:,verbose:,task-filter: +LONGOPTS=$LONGOPTS,stacktrace-depth:,require-start:,require-end: +LONGOPTS=$LONGOPTS,reject-start:,reject-end:,oom-kill-allocating-task:,help + +if [ $FAILCMD_TYPE = failslab ]; then + LONGOPTS=$LONGOPTS,ignore-gfp-wait:,cache-filter: +elif [ $FAILCMD_TYPE = fail_page_alloc ]; then + LONGOPTS=$LONGOPTS,ignore-gfp-wait:,ignore-gfp-highmem:,min-order: +fi + +TEMP=`getopt -o p:i:t:s:v:h --long $LONGOPTS -n 'failcmd.sh' -- "$@"` + +if [ $? != 0 ]; then + usage + exit 1 +fi + +eval set -- "$TEMP" + +fault_attr_default() +{ + echo N > $FAULTATTR/task-filter + echo 0 > $FAULTATTR/probability + echo 1 > $FAULTATTR/times +} + +fault_attr_default + +oom_kill_allocating_task_saved=`cat /proc/sys/vm/oom_kill_allocating_task` + +restore_values() +{ + fault_attr_default + echo $oom_kill_allocating_task_saved \ + > /proc/sys/vm/oom_kill_allocating_task +} + +# +# Default options +# +declare -i oom_kill_allocating_task=1 +declare task_filter=Y +declare -i probability=1 +declare -i times=1 + +while true; do + case "$1" in + -p|--probability) + probability=$2 + shift 2 + ;; + -i|--interval) + echo $2 > $FAULTATTR/interval + shift 2 + ;; + -t|--times) + times=$2 + shift 2 + ;; + -s|--space) + echo $2 > $FAULTATTR/space + shift 2 + ;; + -v|--verbose) + echo $2 > $FAULTATTR/verbose + shift 2 + ;; + --task-filter) + task_filter=$2 + shift 2 + ;; + --stacktrace-depth) + echo $2 > $FAULTATTR/stacktrace-depth + shift 2 + ;; + --require-start) + echo $2 > $FAULTATTR/require-start + shift 2 + ;; + --require-end) + echo $2 > $FAULTATTR/require-end + shift 2 + ;; + --reject-start) + echo $2 > $FAULTATTR/reject-start + shift 2 + ;; + --reject-end) + echo $2 > $FAULTATTR/reject-end + shift 2 + ;; + --oom-kill-allocating-task) + oom_kill_allocating_task=$2 + shift 2 + ;; + --ignore-gfp-wait) + echo $2 > $FAULTATTR/ignore-gfp-wait + shift 2 + ;; + --cache-filter) + echo $2 > $FAULTATTR/cache_filter + shift 2 + ;; + --ignore-gfp-highmem) + echo $2 > $FAULTATTR/ignore-gfp-highmem + shift 2 + ;; + --min-order) + echo $2 > $FAULTATTR/min-order + shift 2 + ;; + -h|--help) + usage + exit 0 + shift + ;; + --) + shift + break + ;; + esac +done + +[ -z "$@" ] && exit 0 + +echo $oom_kill_allocating_task > /proc/sys/vm/oom_kill_allocating_task +echo $task_filter > $FAULTATTR/task-filter +echo $probability > $FAULTATTR/probability +echo $times > $FAULTATTR/times + +trap "restore_values" SIGINT SIGTERM EXIT + +cmd="echo 1 > /proc/self/make-it-fail && exec $@" +bash -c "$cmd" diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 292b13a..52b7959 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -52,6 +52,7 @@ my %default = ( "STOP_AFTER_SUCCESS" => 10, "STOP_AFTER_FAILURE" => 60, "STOP_TEST_AFTER" => 600, + "MAX_MONITOR_WAIT" => 1800, # required, and we will ask users if they don't have them but we keep the default # value something that is common. @@ -77,6 +78,11 @@ my $output_config; my $test_type; my $build_type; my $build_options; +my $final_post_ktest; +my $pre_ktest; +my $post_ktest; +my $pre_test; +my $post_test; my $pre_build; my $post_build; my $pre_build_die; @@ -93,6 +99,7 @@ my $reboot_on_success; my $die_on_failure; my $powercycle_after_reboot; my $poweroff_after_halt; +my $max_monitor_wait; my $ssh_exec; my $scp_to_target; my $scp_to_target_install; @@ -101,6 +108,7 @@ my $grub_menu; my $grub_number; my $target; my $make; +my $pre_install; my $post_install; my $no_install; my $noclean; @@ -167,6 +175,7 @@ my $bisect_check; my $config_bisect; my $config_bisect_type; +my $config_bisect_check; my $patchcheck_type; my $patchcheck_start; @@ -182,6 +191,9 @@ my $newconfig = 0; my %entered_configs; my %config_help; my %variable; + +# force_config is the list of configs that we force enabled (or disabled) +# in a .config file. The MIN_CONFIG and ADD_CONFIG configs. my %force_config; # do not force reboots on config problems @@ -197,6 +209,10 @@ my %option_map = ( "OUTPUT_DIR" => \$outputdir, "BUILD_DIR" => \$builddir, "TEST_TYPE" => \$test_type, + "PRE_KTEST" => \$pre_ktest, + "POST_KTEST" => \$post_ktest, + "PRE_TEST" => \$pre_test, + "POST_TEST" => \$post_test, "BUILD_TYPE" => \$build_type, "BUILD_OPTIONS" => \$build_options, "PRE_BUILD" => \$pre_build, @@ -216,6 +232,7 @@ my %option_map = ( "ADD_CONFIG" => \$addconfig, "REBOOT_TYPE" => \$reboot_type, "GRUB_MENU" => \$grub_menu, + "PRE_INSTALL" => \$pre_install, "POST_INSTALL" => \$post_install, "NO_INSTALL" => \$no_install, "REBOOT_SCRIPT" => \$reboot_script, @@ -228,6 +245,7 @@ my %option_map = ( "POWER_OFF" => \$power_off, "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot, "POWEROFF_AFTER_HALT" => \$poweroff_after_halt, + "MAX_MONITOR_WAIT" => \$max_monitor_wait, "SLEEP_TIME" => \$sleep_time, "BISECT_SLEEP_TIME" => \$bisect_sleep_time, "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time, @@ -272,6 +290,7 @@ my %option_map = ( "CONFIG_BISECT" => \$config_bisect, "CONFIG_BISECT_TYPE" => \$config_bisect_type, + "CONFIG_BISECT_CHECK" => \$config_bisect_check, "PATCHCHECK_TYPE" => \$patchcheck_type, "PATCHCHECK_START" => \$patchcheck_start, @@ -604,6 +623,10 @@ sub process_compare { return $lval eq $rval; } elsif ($cmp eq "!=") { return $lval ne $rval; + } elsif ($cmp eq "=~") { + return $lval =~ m/$rval/; + } elsif ($cmp eq "!~") { + return $lval !~ m/$rval/; } my $statement = "$lval $cmp $rval"; @@ -659,7 +682,7 @@ sub process_expression { } } - if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { + if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) { my $ret = process_compare($1, $2, $3); if ($ret < 0) { die "$name: $.: Unable to process comparison\n"; @@ -1117,7 +1140,11 @@ sub reboot { } if (defined($time)) { - wait_for_monitor($time, $reboot_success_line); + if (wait_for_monitor($time, $reboot_success_line)) { + # reboot got stuck? + doprint "Reboot did not finish. Forcing power cycle\n"; + run_command "$power_cycle"; + } end_monitor; } } @@ -1212,6 +1239,11 @@ sub wait_for_monitor { my $full_line = ""; my $line; my $booted = 0; + my $start_time = time; + my $skip_call_trace = 0; + my $bug = 0; + my $bug_ignored = 0; + my $now; doprint "** Wait for monitor to settle down **\n"; @@ -1227,11 +1259,39 @@ sub wait_for_monitor { $booted = 1; } + if ($full_line =~ /\[ backtrace testing \]/) { + $skip_call_trace = 1; + } + + if ($full_line =~ /call trace:/i) { + if (!$bug && !$skip_call_trace) { + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + } + } + } + + if ($full_line =~ /\[ end of backtrace testing \]/) { + $skip_call_trace = 0; + } + + if ($full_line =~ /Kernel panic -/) { + $bug = 1; + } + if ($line =~ /\n/) { $full_line = ""; } + $now = time; + if ($now - $start_time >= $max_monitor_wait) { + doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n"; + return 1; + } } print "** Monitor flushed **\n"; + return $bug; } sub save_logs { @@ -1273,6 +1333,10 @@ sub save_logs { sub fail { + if (defined($post_test)) { + run_command $post_test; + } + if ($die_on_failure) { dodie @_; } @@ -1656,6 +1720,12 @@ sub install { return if ($no_install); + if (defined($pre_install)) { + my $cp_pre_install = eval_kernel_version $pre_install; + run_command "$cp_pre_install" or + dodie "Failed to run pre install"; + } + my $cp_target = eval_kernel_version $target_image; run_scp_install "$outputdir/$build_target", "$cp_target" or @@ -1814,6 +1884,7 @@ sub make_oldconfig { sub load_force_config { my ($config) = @_; + doprint "Loading force configs from $config\n"; open(IN, $config) or dodie "failed to read $config"; while (<IN>) { @@ -1937,6 +2008,10 @@ sub halt { sub success { my ($i) = @_; + if (defined($post_test)) { + run_command $post_test; + } + $successes++; my $name = ""; @@ -2003,6 +2078,7 @@ sub do_run_test { my $line; my $full_line; my $bug = 0; + my $bug_ignored = 0; wait_for_monitor 1; @@ -2027,7 +2103,11 @@ sub do_run_test { doprint $line; if ($full_line =~ /call trace:/i) { - $bug = 1; + if ($ignore_errors) { + $bug_ignored = 1; + } else { + $bug = 1; + } } if ($full_line =~ /Kernel panic -/) { @@ -2040,6 +2120,10 @@ sub do_run_test { } } while (!$child_done && !$bug); + if (!$bug && $bug_ignored) { + doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n"; + } + if ($bug) { my $failure_start = time; my $now; @@ -2362,9 +2446,24 @@ sub bisect { success $i; } +# config_ignore holds the configs that were set (or unset) for +# a good config and we will ignore these configs for the rest +# of a config bisect. These configs stay as they were. my %config_ignore; + +# config_set holds what all configs were set as. my %config_set; +# config_off holds the set of configs that the bad config had disabled. +# We need to record them and set them in the .config when running +# oldnoconfig, because oldnoconfig does not turn off new symbols, but +# instead just keeps the defaults. +my %config_off; + +# config_off_tmp holds a set of configs to turn off for now +my @config_off_tmp; + +# config_list is the set of configs that are being tested my %config_list; my %null_config; @@ -2443,12 +2542,21 @@ sub create_config { } } + # turn off configs to keep off + foreach my $config (keys %config_off) { + print OUT "# $config is not set\n"; + } + + # turn off configs that should be off for now + foreach my $config (@config_off_tmp) { + print OUT "# $config is not set\n"; + } + foreach my $config (keys %config_ignore) { print OUT "$config_ignore{$config}\n"; } close(OUT); -# exit; make_oldconfig; } @@ -2525,6 +2633,13 @@ sub run_config_bisect { do { my @tophalf = @start_list[0 .. $half]; + # keep the bottom half off + if ($half < $#start_list) { + @config_off_tmp = @start_list[$half + 1 .. $#start_list]; + } else { + @config_off_tmp = (); + } + create_config @tophalf; read_current_config \%current_config; @@ -2541,7 +2656,11 @@ sub run_config_bisect { if (!$found) { # try the other half doprint "Top half produced no set configs, trying bottom half\n"; + + # keep the top half off + @config_off_tmp = @tophalf; @tophalf = @start_list[$half + 1 .. $#start_list]; + create_config @tophalf; read_current_config \%current_config; foreach my $config (@tophalf) { @@ -2679,6 +2798,10 @@ sub config_bisect { $added_configs{$2} = $1; $config_list{$2} = $1; } + } elsif (/^# ((CONFIG\S*).*)/) { + # Keep these configs disabled + $config_set{$2} = $1; + $config_off{$2} = $1; } } close(IN); @@ -2701,6 +2824,8 @@ sub config_bisect { my %config_test; my $once = 0; + @config_off_tmp = (); + # Sometimes kconfig does weird things. We must make sure # that the config we autocreate has everything we need # to test, otherwise we may miss testing configs, or @@ -2719,6 +2844,18 @@ sub config_bisect { } } my $ret; + + if (defined($config_bisect_check) && $config_bisect_check) { + doprint " Checking to make sure bad config with min config fails\n"; + create_config keys %config_list; + $ret = run_config_bisect_test $config_bisect_type; + if ($ret) { + doprint " FAILED! Bad config with min config boots fine\n"; + return -1; + } + doprint " Bad config with min config fails as expected\n"; + } + do { $ret = run_config_bisect; } while (!$ret); @@ -3510,6 +3647,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $iteration = $i; + undef %force_config; + my $makecmd = set_test_option("MAKE_CMD", $i); # Load all the options into their mapped variable names @@ -3519,6 +3658,18 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $start_minconfig_defined = 1; + # The first test may override the PRE_KTEST option + if (defined($pre_ktest) && $i == 1) { + doprint "\n"; + run_command $pre_ktest; + } + + # Any test can override the POST_KTEST option + # The last test takes precedence. + if (defined($post_ktest)) { + $final_post_ktest = $post_ktest; + } + if (!defined($start_minconfig)) { $start_minconfig_defined = 0; $start_minconfig = $minconfig; @@ -3573,6 +3724,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { doprint "\n\n"; doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n"; + if (defined($pre_test)) { + run_command $pre_test; + } + unlink $dmesg; unlink $buildlog; unlink $testlog; @@ -3638,6 +3793,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { success $i; } +if (defined($final_post_ktest)) { + run_command $final_post_ktest; +} + if ($opt{"POWEROFF_ON_SUCCESS"}) { halt; } elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index cf362b3..de28a0a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -376,6 +376,24 @@ # DEFAULTS # DEFAULTS SKIP +# If you want to execute some command before the first test runs +# you can set this option. Note, it can be set as a default option +# or an option in the first test case. All other test cases will +# ignore it. If both the default and first test have this option +# set, then the first test will take precedence. +# +# default (undefined) +#PRE_KTEST = ${SSH} ~/set_up_test + +# If you want to execute some command after all the tests have +# completed, you can set this option. Note, it can be set as a +# default or any test case can override it. If multiple test cases +# set this option, then the last test case that set it will take +# precedence +# +# default (undefined) +#POST_KTEST = ${SSH} ~/dismantle_test + # The default test type (default test) # The test types may be: # build - only build the kernel, do nothing else @@ -408,6 +426,14 @@ # (default "") #BUILD_OPTIONS = -j20 +# If you need to do some special handling before installing +# you can add a script with this option. +# The environment variable KERNEL_VERSION will be set to the +# kernel version that is used. +# +# default (undefined) +#PRE_INSTALL = ssh user@target rm -rf '/lib/modules/*-test*' + # If you need an initrd, you can add a script or code here to install # it. The environment variable KERNEL_VERSION will be set to the # kernel version that is used. Remember to add the initrd line @@ -426,6 +452,18 @@ # (default 0) #NO_INSTALL = 1 +# If there is a command that you want to run before the individual test +# case executes, then you can set this option +# +# default (undefined) +#PRE_TEST = ${SSH} reboot_to_special_kernel + +# If there is a command you want to run after the individual test case +# completes, then you can set this option. +# +# default (undefined) +#POST_TEST = cd ${BUILD_DIR}; git reset --hard + # If there is a script that you require to run before the build is done # you can specify it with PRE_BUILD. # @@ -657,6 +695,14 @@ # (default 60) #BISECT_SLEEP_TIME = 60 +# The max wait time (in seconds) for waiting for the console to finish. +# If for some reason, the console is outputting content without +# ever finishing, this will cause ktest to get stuck. This +# option is the max time ktest will wait for the monitor (console) +# to settle down before continuing. +# (default 1800) +#MAX_MONITOR_WAIT + # The time in between patch checks to sleep (in seconds) # (default 60) #PATCHCHECK_SLEEP_TIME = 60 @@ -1039,6 +1085,12 @@ # can specify it with CONFIG_BISECT_GOOD. Otherwise # the MIN_CONFIG is the base. # +# CONFIG_BISECT_CHECK (optional) +# Set this to 1 if you want to confirm that the config ktest +# generates (the bad config with the min config) is still bad. +# It may be that the min config fixes what broke the bad config +# and the test will not return a result. +# # Example: # TEST_START # TEST_TYPE = config_bisect diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index a4162e1..85baf11 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -1,4 +1,4 @@ -TARGETS = breakpoints kcmp mqueue vm +TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug all: for TARGET in $(TARGETS); do \ diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile new file mode 100644 index 0000000..7c9c20f --- /dev/null +++ b/tools/testing/selftests/cpu-hotplug/Makefile @@ -0,0 +1,6 @@ +all: + +run_tests: + ./on-off-test.sh + +clean: diff --git a/tools/testing/selftests/cpu-hotplug/on-off-test.sh b/tools/testing/selftests/cpu-hotplug/on-off-test.sh new file mode 100644 index 0000000..bdde7cf --- /dev/null +++ b/tools/testing/selftests/cpu-hotplug/on-off-test.sh @@ -0,0 +1,221 @@ +#!/bin/bash + +SYSFS= + +prerequisite() +{ + msg="skip all tests:" + + if [ $UID != 0 ]; then + echo $msg must be run as root >&2 + exit 0 + fi + + SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` + + if [ ! -d "$SYSFS" ]; then + echo $msg sysfs is not mounted >&2 + exit 0 + fi + + if ! ls $SYSFS/devices/system/cpu/cpu* > /dev/null 2>&1; then + echo $msg cpu hotplug is not supported >&2 + exit 0 + fi +} + +# +# list all hot-pluggable CPUs +# +hotpluggable_cpus() +{ + local state=${1:-.\*} + + for cpu in $SYSFS/devices/system/cpu/cpu*; do + if [ -f $cpu/online ] && grep -q $state $cpu/online; then + echo ${cpu##/*/cpu} + fi + done +} + +hotplaggable_offline_cpus() +{ + hotpluggable_cpus 0 +} + +hotpluggable_online_cpus() +{ + hotpluggable_cpus 1 +} + +cpu_is_online() +{ + grep -q 1 $SYSFS/devices/system/cpu/cpu$1/online +} + +cpu_is_offline() +{ + grep -q 0 $SYSFS/devices/system/cpu/cpu$1/online +} + +online_cpu() +{ + echo 1 > $SYSFS/devices/system/cpu/cpu$1/online +} + +offline_cpu() +{ + echo 0 > $SYSFS/devices/system/cpu/cpu$1/online +} + +online_cpu_expect_success() +{ + local cpu=$1 + + if ! online_cpu $cpu; then + echo $FUNCNAME $cpu: unexpected fail >&2 + elif ! cpu_is_online $cpu; then + echo $FUNCNAME $cpu: unexpected offline >&2 + fi +} + +online_cpu_expect_fail() +{ + local cpu=$1 + + if online_cpu $cpu 2> /dev/null; then + echo $FUNCNAME $cpu: unexpected success >&2 + elif ! cpu_is_offline $cpu; then + echo $FUNCNAME $cpu: unexpected online >&2 + fi +} + +offline_cpu_expect_success() +{ + local cpu=$1 + + if ! offline_cpu $cpu; then + echo $FUNCNAME $cpu: unexpected fail >&2 + elif ! cpu_is_offline $cpu; then + echo $FUNCNAME $cpu: unexpected offline >&2 + fi +} + +offline_cpu_expect_fail() +{ + local cpu=$1 + + if offline_cpu $cpu 2> /dev/null; then + echo $FUNCNAME $cpu: unexpected success >&2 + elif ! cpu_is_online $cpu; then + echo $FUNCNAME $cpu: unexpected offline >&2 + fi +} + +error=-12 +priority=0 + +while getopts e:hp: opt; do + case $opt in + e) + error=$OPTARG + ;; + h) + echo "Usage $0 [ -e errno ] [ -p notifier-priority ]" + exit + ;; + p) + priority=$OPTARG + ;; + esac +done + +if ! [ "$error" -ge -4095 -a "$error" -lt 0 ]; then + echo "error code must be -4095 <= errno < 0" >&2 + exit 1 +fi + +prerequisite + +# +# Online all hot-pluggable CPUs +# +for cpu in `hotplaggable_offline_cpus`; do + online_cpu_expect_success $cpu +done + +# +# Offline all hot-pluggable CPUs +# +for cpu in `hotpluggable_online_cpus`; do + offline_cpu_expect_success $cpu +done + +# +# Online all hot-pluggable CPUs again +# +for cpu in `hotplaggable_offline_cpus`; do + online_cpu_expect_success $cpu +done + +# +# Test with cpu notifier error injection +# + +DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3 }'` +NOTIFIER_ERR_INJECT_DIR=$DEBUGFS/notifier-error-inject/cpu + +prerequisite_extra() +{ + msg="skip extra tests:" + + /sbin/modprobe -q -r cpu-notifier-error-inject + /sbin/modprobe -q cpu-notifier-error-inject priority=$priority + + if [ ! -d "$DEBUGFS" ]; then + echo $msg debugfs is not mounted >&2 + exit 0 + fi + + if [ ! -d $NOTIFIER_ERR_INJECT_DIR ]; then + echo $msg cpu-notifier-error-inject module is not available >&2 + exit 0 + fi +} + +prerequisite_extra + +# +# Offline all hot-pluggable CPUs +# +echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_DOWN_PREPARE/error +for cpu in `hotpluggable_online_cpus`; do + offline_cpu_expect_success $cpu +done + +# +# Test CPU hot-add error handling (offline => online) +# +echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_UP_PREPARE/error +for cpu in `hotplaggable_offline_cpus`; do + online_cpu_expect_fail $cpu +done + +# +# Online all hot-pluggable CPUs +# +echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_UP_PREPARE/error +for cpu in `hotplaggable_offline_cpus`; do + online_cpu_expect_success $cpu +done + +# +# Test CPU hot-remove error handling (online => offline) +# +echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_DOWN_PREPARE/error +for cpu in `hotpluggable_online_cpus`; do + offline_cpu_expect_fail $cpu +done + +echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_DOWN_PREPARE/error +/sbin/modprobe -q -r cpu-notifier-error-inject diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile new file mode 100644 index 0000000..7c9c20f --- /dev/null +++ b/tools/testing/selftests/memory-hotplug/Makefile @@ -0,0 +1,6 @@ +all: + +run_tests: + ./on-off-test.sh + +clean: diff --git a/tools/testing/selftests/memory-hotplug/on-off-test.sh b/tools/testing/selftests/memory-hotplug/on-off-test.sh new file mode 100644 index 0000000..a2816f6 --- /dev/null +++ b/tools/testing/selftests/memory-hotplug/on-off-test.sh @@ -0,0 +1,230 @@ +#!/bin/bash + +SYSFS= + +prerequisite() +{ + msg="skip all tests:" + + if [ $UID != 0 ]; then + echo $msg must be run as root >&2 + exit 0 + fi + + SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` + + if [ ! -d "$SYSFS" ]; then + echo $msg sysfs is not mounted >&2 + exit 0 + fi + + if ! ls $SYSFS/devices/system/memory/memory* > /dev/null 2>&1; then + echo $msg memory hotplug is not supported >&2 + exit 0 + fi +} + +# +# list all hot-pluggable memory +# +hotpluggable_memory() +{ + local state=${1:-.\*} + + for memory in $SYSFS/devices/system/memory/memory*; do + if grep -q 1 $memory/removable && + grep -q $state $memory/state; then + echo ${memory##/*/memory} + fi + done +} + +hotplaggable_offline_memory() +{ + hotpluggable_memory offline +} + +hotpluggable_online_memory() +{ + hotpluggable_memory online +} + +memory_is_online() +{ + grep -q online $SYSFS/devices/system/memory/memory$1/state +} + +memory_is_offline() +{ + grep -q offline $SYSFS/devices/system/memory/memory$1/state +} + +online_memory() +{ + echo online > $SYSFS/devices/system/memory/memory$1/state +} + +offline_memory() +{ + echo offline > $SYSFS/devices/system/memory/memory$1/state +} + +online_memory_expect_success() +{ + local memory=$1 + + if ! online_memory $memory; then + echo $FUNCNAME $memory: unexpected fail >&2 + elif ! memory_is_online $memory; then + echo $FUNCNAME $memory: unexpected offline >&2 + fi +} + +online_memory_expect_fail() +{ + local memory=$1 + + if online_memory $memory 2> /dev/null; then + echo $FUNCNAME $memory: unexpected success >&2 + elif ! memory_is_offline $memory; then + echo $FUNCNAME $memory: unexpected online >&2 + fi +} + +offline_memory_expect_success() +{ + local memory=$1 + + if ! offline_memory $memory; then + echo $FUNCNAME $memory: unexpected fail >&2 + elif ! memory_is_offline $memory; then + echo $FUNCNAME $memory: unexpected offline >&2 + fi +} + +offline_memory_expect_fail() +{ + local memory=$1 + + if offline_memory $memory 2> /dev/null; then + echo $FUNCNAME $memory: unexpected success >&2 + elif ! memory_is_online $memory; then + echo $FUNCNAME $memory: unexpected offline >&2 + fi +} + +error=-12 +priority=0 +ratio=10 + +while getopts e:hp:r: opt; do + case $opt in + e) + error=$OPTARG + ;; + h) + echo "Usage $0 [ -e errno ] [ -p notifier-priority ] [ -r percent-of-memory-to-offline ]" + exit + ;; + p) + priority=$OPTARG + ;; + r) + ratio=$OPTARG + ;; + esac +done + +if ! [ "$error" -ge -4095 -a "$error" -lt 0 ]; then + echo "error code must be -4095 <= errno < 0" >&2 + exit 1 +fi + +prerequisite + +# +# Online all hot-pluggable memory +# +for memory in `hotplaggable_offline_memory`; do + online_memory_expect_success $memory +done + +# +# Offline $ratio percent of hot-pluggable memory +# +for memory in `hotpluggable_online_memory`; do + if [ $((RANDOM % 100)) -lt $ratio ]; then + offline_memory_expect_success $memory + fi +done + +# +# Online all hot-pluggable memory again +# +for memory in `hotplaggable_offline_memory`; do + online_memory_expect_success $memory +done + +# +# Test with memory notifier error injection +# + +DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3 }'` +NOTIFIER_ERR_INJECT_DIR=$DEBUGFS/notifier-error-inject/memory + +prerequisite_extra() +{ + msg="skip extra tests:" + + /sbin/modprobe -q -r memory-notifier-error-inject + /sbin/modprobe -q memory-notifier-error-inject priority=$priority + + if [ ! -d "$DEBUGFS" ]; then + echo $msg debugfs is not mounted >&2 + exit 0 + fi + + if [ ! -d $NOTIFIER_ERR_INJECT_DIR ]; then + echo $msg memory-notifier-error-inject module is not available >&2 + exit 0 + fi +} + +prerequisite_extra + +# +# Offline $ratio percent of hot-pluggable memory +# +echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error +for memory in `hotpluggable_online_memory`; do + if [ $((RANDOM % 100)) -lt $ratio ]; then + offline_memory_expect_success $memory + fi +done + +# +# Test memory hot-add error handling (offline => online) +# +echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error +for memory in `hotplaggable_offline_memory`; do + online_memory_expect_fail $memory +done + +# +# Online all hot-pluggable memory +# +echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error +for memory in `hotplaggable_offline_memory`; do + online_memory_expect_success $memory +done + +# +# Test memory hot-remove error handling (online => offline) +# +echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error +for memory in `hotpluggable_online_memory`; do + offline_memory_expect_fail $memory +done + +echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error +/sbin/modprobe -q -r memory-notifier-error-inject |
