diff options
Diffstat (limited to 'sound/usb/line6/pcm.h')
| -rw-r--r-- | sound/usb/line6/pcm.h | 304 |
1 files changed, 85 insertions, 219 deletions
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h index c742b33..42d3e6f 100644 --- a/sound/usb/line6/pcm.h +++ b/sound/usb/line6/pcm.h @@ -54,109 +54,33 @@ However, from the device's point of view, there is just a single capture and playback stream, which must be shared between these subsystems. It is therefore necessary to maintain the state of the - subsystems with respect to PCM usage. We define several constants of - the form LINE6_BIT_PCM_<subsystem>_<direction>_<resource> with the - following meanings: - *) <subsystem> is one of - -) ALSA: PCM playback and capture via ALSA - -) MONITOR: software monitoring - -) IMPULSE: optional impulse response measurement - *) <direction> is one of - -) PLAYBACK: audio output (from host to device) - -) CAPTURE: audio input (from device to host) - *) <resource> is one of - -) BUFFER: buffer required by PCM data stream - -) STREAM: actual PCM data stream - - The subsystems call line6_pcm_acquire() to acquire the (shared) - resources needed for a particular operation (e.g., allocate the buffer - for ALSA playback or start the capture stream for software monitoring). - When a resource is no longer needed, it is released by calling - line6_pcm_release(). Buffer allocation and stream startup are handled - separately to allow the ALSA kernel driver to perform them at - appropriate places (since the callback which starts a PCM stream is not - allowed to sleep). + subsystems with respect to PCM usage. + + We define two bit flags, "opened" and "running", for each playback + or capture stream. Both can contain the bit flag corresponding to + LINE6_STREAM_* type, + LINE6_STREAM_PCM = ALSA PCM playback or capture + LINE6_STREAM_MONITOR = software monitoring + IMPULSE = optional impulse response measurement + The opened flag indicates whether the buffer is allocated while + the running flag indicates whether the stream is running. + + For monitor or impulse operations, the driver needs to call + snd_line6_duplex_acquire() or snd_line6_duplex_release() with the + appropriate LINE6_STREAM_* flag. */ + +/* stream types */ enum { - /* individual bit indices: */ - LINE6_INDEX_PCM_ALSA_PLAYBACK_BUFFER, - LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM, - LINE6_INDEX_PCM_ALSA_CAPTURE_BUFFER, - LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, - LINE6_INDEX_PCM_MONITOR_PLAYBACK_BUFFER, - LINE6_INDEX_PCM_MONITOR_PLAYBACK_STREAM, - LINE6_INDEX_PCM_MONITOR_CAPTURE_BUFFER, - LINE6_INDEX_PCM_MONITOR_CAPTURE_STREAM, - LINE6_INDEX_PCM_IMPULSE_PLAYBACK_BUFFER, - LINE6_INDEX_PCM_IMPULSE_PLAYBACK_STREAM, - LINE6_INDEX_PCM_IMPULSE_CAPTURE_BUFFER, - LINE6_INDEX_PCM_IMPULSE_CAPTURE_STREAM, - LINE6_INDEX_PAUSE_PLAYBACK, - LINE6_INDEX_PREPARED, - -#define LINE6_BIT(x) LINE6_BIT_ ## x = 1 << LINE6_INDEX_ ## x - - /* individual bit masks: */ - LINE6_BIT(PCM_ALSA_PLAYBACK_BUFFER), - LINE6_BIT(PCM_ALSA_PLAYBACK_STREAM), - LINE6_BIT(PCM_ALSA_CAPTURE_BUFFER), - LINE6_BIT(PCM_ALSA_CAPTURE_STREAM), - LINE6_BIT(PCM_MONITOR_PLAYBACK_BUFFER), - LINE6_BIT(PCM_MONITOR_PLAYBACK_STREAM), - LINE6_BIT(PCM_MONITOR_CAPTURE_BUFFER), - LINE6_BIT(PCM_MONITOR_CAPTURE_STREAM), - LINE6_BIT(PCM_IMPULSE_PLAYBACK_BUFFER), - LINE6_BIT(PCM_IMPULSE_PLAYBACK_STREAM), - LINE6_BIT(PCM_IMPULSE_CAPTURE_BUFFER), - LINE6_BIT(PCM_IMPULSE_CAPTURE_STREAM), - LINE6_BIT(PAUSE_PLAYBACK), - LINE6_BIT(PREPARED), - - /* combined bit masks (by operation): */ - LINE6_BITS_PCM_ALSA_BUFFER = - LINE6_BIT_PCM_ALSA_PLAYBACK_BUFFER | - LINE6_BIT_PCM_ALSA_CAPTURE_BUFFER, - - LINE6_BITS_PCM_ALSA_STREAM = - LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM | - LINE6_BIT_PCM_ALSA_CAPTURE_STREAM, - - LINE6_BITS_PCM_MONITOR = - LINE6_BIT_PCM_MONITOR_PLAYBACK_BUFFER | - LINE6_BIT_PCM_MONITOR_PLAYBACK_STREAM | - LINE6_BIT_PCM_MONITOR_CAPTURE_BUFFER | - LINE6_BIT_PCM_MONITOR_CAPTURE_STREAM, - - LINE6_BITS_PCM_IMPULSE = - LINE6_BIT_PCM_IMPULSE_PLAYBACK_BUFFER | - LINE6_BIT_PCM_IMPULSE_PLAYBACK_STREAM | - LINE6_BIT_PCM_IMPULSE_CAPTURE_BUFFER | - LINE6_BIT_PCM_IMPULSE_CAPTURE_STREAM, - - /* combined bit masks (by direction): */ - LINE6_BITS_PLAYBACK_BUFFER = - LINE6_BIT_PCM_IMPULSE_PLAYBACK_BUFFER | - LINE6_BIT_PCM_ALSA_PLAYBACK_BUFFER | - LINE6_BIT_PCM_MONITOR_PLAYBACK_BUFFER, - - LINE6_BITS_PLAYBACK_STREAM = - LINE6_BIT_PCM_IMPULSE_PLAYBACK_STREAM | - LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM | - LINE6_BIT_PCM_MONITOR_PLAYBACK_STREAM, - - LINE6_BITS_CAPTURE_BUFFER = - LINE6_BIT_PCM_IMPULSE_CAPTURE_BUFFER | - LINE6_BIT_PCM_ALSA_CAPTURE_BUFFER | - LINE6_BIT_PCM_MONITOR_CAPTURE_BUFFER, - - LINE6_BITS_CAPTURE_STREAM = - LINE6_BIT_PCM_IMPULSE_CAPTURE_STREAM | - LINE6_BIT_PCM_ALSA_CAPTURE_STREAM | - LINE6_BIT_PCM_MONITOR_CAPTURE_STREAM, - - LINE6_BITS_STREAM = - LINE6_BITS_PLAYBACK_STREAM | - LINE6_BITS_CAPTURE_STREAM + LINE6_STREAM_PCM, + LINE6_STREAM_MONITOR, + LINE6_STREAM_IMPULSE, +}; + +/* misc bit flags for PCM operation */ +enum { + LINE6_FLAG_PAUSE_PLAYBACK, + LINE6_FLAG_PREPARED, }; struct line6_pcm_properties { @@ -165,115 +89,87 @@ struct line6_pcm_properties { int bytes_per_frame; }; -struct snd_line6_pcm { - /** - Pointer back to the Line 6 driver data structure. - */ - struct usb_line6 *line6; +struct line6_pcm_stream { + /* allocated URBs */ + struct urb *urbs[LINE6_ISO_BUFFERS]; - /** - Properties. - */ - struct line6_pcm_properties *properties; + /* Temporary buffer; + * Since the packet size is not known in advance, this buffer is + * large enough to store maximum size packets. + */ + unsigned char *buffer; - /** - ALSA pcm stream - */ - struct snd_pcm *pcm; + /* Free frame position in the buffer. */ + snd_pcm_uframes_t pos; - /** - URBs for audio playback. - */ - struct urb *urb_audio_out[LINE6_ISO_BUFFERS]; + /* Count processed bytes; + * This is modulo period size (to determine when a period is finished). + */ + unsigned bytes; - /** - URBs for audio capture. - */ - struct urb *urb_audio_in[LINE6_ISO_BUFFERS]; + /* Counter to create desired sample rate */ + unsigned count; - /** - Temporary buffer for playback. - Since the packet size is not known in advance, this buffer is - large enough to store maximum size packets. - */ - unsigned char *buffer_out; + /* period size in bytes */ + unsigned period; - /** - Temporary buffer for capture. - Since the packet size is not known in advance, this buffer is - large enough to store maximum size packets. - */ - unsigned char *buffer_in; + /* Processed frame position in the buffer; + * The contents of the ring buffer have been consumed by the USB + * subsystem (i.e., sent to the USB device) up to this position. + */ + snd_pcm_uframes_t pos_done; - /** - Previously captured frame (for software monitoring). - */ - unsigned char *prev_fbuf; + /* Bit mask of active URBs */ + unsigned long active_urbs; - /** - Size of previously captured frame (for software monitoring). - */ - int prev_fsize; + /* Bit mask of URBs currently being unlinked */ + unsigned long unlink_urbs; - /** - Free frame position in the playback buffer. - */ - snd_pcm_uframes_t pos_out; + /* Spin lock to protect updates of the buffer positions (not contents) + */ + spinlock_t lock; - /** - Count processed bytes for playback. - This is modulo period size (to determine when a period is - finished). - */ - unsigned bytes_out; + /* Bit flags for operational stream types */ + unsigned long opened; - /** - Counter to create desired playback sample rate. - */ - unsigned count_out; + /* Bit flags for running stream types */ + unsigned long running; - /** - Playback period size in bytes - */ - unsigned period_out; + int last_frame; +}; +struct snd_line6_pcm { /** - Processed frame position in the playback buffer. - The contents of the output ring buffer have been consumed by - the USB subsystem (i.e., sent to the USB device) up to this - position. + Pointer back to the Line 6 driver data structure. */ - snd_pcm_uframes_t pos_out_done; + struct usb_line6 *line6; /** - Count processed bytes for capture. - This is modulo period size (to determine when a period is - finished). + Properties. */ - unsigned bytes_in; + struct line6_pcm_properties *properties; /** - Counter to create desired capture sample rate. + ALSA pcm stream */ - unsigned count_in; + struct snd_pcm *pcm; - /** - Capture period size in bytes - */ - unsigned period_in; + /* protection to state changes of in/out streams */ + struct mutex state_mutex; + + /* Capture and playback streams */ + struct line6_pcm_stream in; + struct line6_pcm_stream out; /** - Processed frame position in the capture buffer. - The contents of the output ring buffer have been consumed by - the USB subsystem (i.e., sent to the USB device) up to this - position. + Previously captured frame (for software monitoring). */ - snd_pcm_uframes_t pos_in_done; + unsigned char *prev_fbuf; /** - Bit mask of active playback URBs. + Size of previously captured frame (for software monitoring). */ - unsigned long active_urb_out; + int prev_fsize; /** Maximum size of USB packet. @@ -281,38 +177,6 @@ struct snd_line6_pcm { int max_packet_size; /** - Bit mask of active capture URBs. - */ - unsigned long active_urb_in; - - /** - Bit mask of playback URBs currently being unlinked. - */ - unsigned long unlink_urb_out; - - /** - Bit mask of capture URBs currently being unlinked. - */ - unsigned long unlink_urb_in; - - /** - Spin lock to protect updates of the playback buffer positions (not - contents!) - */ - spinlock_t lock_audio_out; - - /** - Spin lock to protect updates of the capture buffer positions (not - contents!) - */ - spinlock_t lock_audio_in; - - /** - Spin lock to protect trigger. - */ - spinlock_t lock_trigger; - - /** PCM playback volume (left and right). */ int volume_playback[2]; @@ -338,19 +202,21 @@ struct snd_line6_pcm { int impulse_count; /** - Several status bits (see LINE6_BIT_*). + Several status bits (see LINE6_FLAG_*). */ unsigned long flags; - - int last_frame_in, last_frame_out; }; extern int line6_init_pcm(struct usb_line6 *line6, struct line6_pcm_properties *properties); extern int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd); extern int snd_line6_prepare(struct snd_pcm_substream *substream); +extern int snd_line6_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params); +extern int snd_line6_hw_free(struct snd_pcm_substream *substream); +extern snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream); extern void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm); -extern int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int channels); -extern int line6_pcm_release(struct snd_line6_pcm *line6pcm, int channels); +extern int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type); +extern void line6_pcm_release(struct snd_line6_pcm *line6pcm, int type); #endif |
