summaryrefslogtreecommitdiffstats
path: root/sound/soc/mxs/mxs-saif.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/mxs/mxs-saif.c')
-rw-r--r--sound/soc/mxs/mxs-saif.c34
1 files changed, 27 insertions, 7 deletions
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index a002ab8..b42f301 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -119,23 +119,33 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
* Set SAIF clock
*
* The SAIF clock should be either 384*fs or 512*fs.
- * If MCLK is used, the SAIF clk ratio need to match mclk ratio.
- * For 32x mclk, set saif clk as 512*fs.
- * For 48x mclk, set saif clk as 384*fs.
+ * If MCLK is used, the SAIF clk ratio needs to match mclk ratio.
+ * For 256x, 128x, 64x, and 32x sub-rates, set saif clk as 512*fs.
+ * For 192x, 96x, and 48x sub-rates, set saif clk as 384*fs.
*
* If MCLK is not used, we just set saif clk to 512*fs.
*/
clk_prepare_enable(master_saif->clk);
if (master_saif->mclk_in_use) {
- if (mclk % 32 == 0) {
+ switch (mclk / rate) {
+ case 32:
+ case 64:
+ case 128:
+ case 256:
+ case 512:
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 512 * rate);
- } else if (mclk % 48 == 0) {
+ break;
+ case 48:
+ case 96:
+ case 192:
+ case 384:
scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 384 * rate);
- } else {
- /* SAIF MCLK should be either 32x or 48x */
+ break;
+ default:
+ /* SAIF MCLK should be a sub-rate of 512x or 384x */
clk_disable_unprepare(master_saif->clk);
return -EINVAL;
}
@@ -299,6 +309,16 @@ static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
return -EBUSY;
}
+ /* If SAIF1 is configured as slave, the clk gate needs to be cleared
+ * before the register can be written.
+ */
+ if (saif->id != saif->master_id) {
+ __raw_writel(BM_SAIF_CTRL_SFTRST,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+ __raw_writel(BM_SAIF_CTRL_CLKGATE,
+ saif->base + SAIF_CTRL + MXS_CLR_ADDR);
+ }
+
scr0 = __raw_readl(saif->base + SAIF_CTRL);
scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \
& ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY;
OpenPOWER on IntegriCloud