summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs')
-rw-r--r--sound/soc/codecs/alc5623.c2
-rw-r--r--sound/soc/codecs/lm4857.c2
-rw-r--r--sound/soc/codecs/tlv320aic26.h4
-rw-r--r--sound/soc/codecs/tlv320aic3x.c2
-rw-r--r--sound/soc/codecs/tlv320dac33.c2
-rw-r--r--sound/soc/codecs/twl4030.c6
-rw-r--r--sound/soc/codecs/wm8580.c2
-rw-r--r--sound/soc/codecs/wm8753.c2
-rw-r--r--sound/soc/codecs/wm8904.c2
-rw-r--r--sound/soc/codecs/wm8955.c2
-rw-r--r--sound/soc/codecs/wm8962.c2
-rw-r--r--sound/soc/codecs/wm8991.c2
-rw-r--r--sound/soc/codecs/wm8993.c2
-rw-r--r--sound/soc/codecs/wm8994.c6
-rw-r--r--sound/soc/codecs/wm9081.c4
15 files changed, 21 insertions, 21 deletions
diff --git a/sound/soc/codecs/alc5623.c b/sound/soc/codecs/alc5623.c
index 4f377c9..eecffb5 100644
--- a/sound/soc/codecs/alc5623.c
+++ b/sound/soc/codecs/alc5623.c
@@ -481,7 +481,7 @@ struct _pll_div {
};
/* Note : pll code from original alc5623 driver. Not sure of how good it is */
-/* usefull only for master mode */
+/* useful only for master mode */
static const struct _pll_div codec_master_pll_div[] = {
{ 2048000, 8192000, 0x0ea0},
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
index 72de47e..2c2a681 100644
--- a/sound/soc/codecs/lm4857.c
+++ b/sound/soc/codecs/lm4857.c
@@ -161,7 +161,7 @@ static const struct snd_kcontrol_new lm4857_controls[] = {
lm4857_get_mode, lm4857_set_mode),
};
-/* There is a demux inbetween the the input signal and the output signals.
+/* There is a demux between the input signal and the output signals.
* Currently there is no easy way to model it in ASoC and since it does not make
* much of a difference in practice simply connect the input direclty to the
* outputs. */
diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h
index 62b1f22..67f19c3 100644
--- a/sound/soc/codecs/tlv320aic26.h
+++ b/sound/soc/codecs/tlv320aic26.h
@@ -14,14 +14,14 @@
#define AIC26_PAGE_ADDR(page, offset) ((page << 6) | offset)
#define AIC26_NUM_REGS AIC26_PAGE_ADDR(3, 0)
-/* Page 0: Auxillary data registers */
+/* Page 0: Auxiliary data registers */
#define AIC26_REG_BAT1 AIC26_PAGE_ADDR(0, 0x05)
#define AIC26_REG_BAT2 AIC26_PAGE_ADDR(0, 0x06)
#define AIC26_REG_AUX AIC26_PAGE_ADDR(0, 0x07)
#define AIC26_REG_TEMP1 AIC26_PAGE_ADDR(0, 0x09)
#define AIC26_REG_TEMP2 AIC26_PAGE_ADDR(0, 0x0A)
-/* Page 1: Auxillary control registers */
+/* Page 1: Auxiliary control registers */
#define AIC26_REG_AUX_ADC AIC26_PAGE_ADDR(1, 0x00)
#define AIC26_REG_STATUS AIC26_PAGE_ADDR(1, 0x01)
#define AIC26_REG_REFERENCE AIC26_PAGE_ADDR(1, 0x03)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 3bedab2..6c43c13 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -884,7 +884,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
if (bypass_pll)
return 0;
- /* Use PLL, compute apropriate setup for j, d, r and p, the closest
+ /* Use PLL, compute appropriate setup for j, d, r and p, the closest
* one wins the game. Try with d==0 first, next with d!=0.
* Constraints for j are according to the datasheet.
* The sysclk is divided by 1000 to prevent integer overflows.
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 00b6d87..f01f141 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -1020,7 +1020,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream)
/*
* For FIFO bypass mode:
* Enable the FIFO bypass (Disable the FIFO use)
- * Set the BCLK as continous
+ * Set the BCLK as continuous
*/
fifoctrl_a |= DAC33_FBYPAS;
aictrl_b |= DAC33_BCLKON;
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 8512800..575238d 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -281,7 +281,7 @@ static inline void twl4030_check_defaults(struct snd_soc_codec *codec)
i, val, twl4030_reg[i]);
}
}
- dev_dbg(codec->dev, "Found %d non maching registers. %s\n",
+ dev_dbg(codec->dev, "Found %d non-matching registers. %s\n",
difference, difference ? "Not OK" : "OK");
}
@@ -2018,7 +2018,7 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
u8 mode;
/* If the system master clock is not 26MHz, the voice PCM interface is
- * not avilable.
+ * not available.
*/
if (twl4030->sysclk != 26000) {
dev_err(codec->dev, "The board is configured for %u Hz, while"
@@ -2028,7 +2028,7 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
}
/* If the codec mode is not option2, the voice PCM interface is not
- * avilable.
+ * available.
*/
mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
& TWL4030_OPT_MODE;
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 8f6b5ee..4bbc0a7 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -772,7 +772,7 @@ static int wm8580_set_bias_level(struct snd_soc_codec *codec,
reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD);
snd_soc_write(codec, WM8580_PWRDN1, reg);
- /* Make VMID high impedence */
+ /* Make VMID high impedance */
reg = snd_soc_read(codec, WM8580_ADC_CONTROL1);
reg &= ~0x100;
snd_soc_write(codec, WM8580_ADC_CONTROL1, reg);
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 3f09dee..ffa2ffe 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1312,7 +1312,7 @@ static int wm8753_set_bias_level(struct snd_soc_codec *codec,
SNDRV_PCM_FMTBIT_S24_LE)
/*
- * The WM8753 supports upto 4 different and mutually exclusive DAI
+ * The WM8753 supports up to 4 different and mutually exclusive DAI
* configurations. This gives 2 PCM's available for use, hifi and voice.
* NOTE: The Voice PCM cannot play or capture audio to the CPU as it's DAI
* is connected between the wm8753 and a BT codec or GSM modem.
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 443ae58..9b3bba4 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -1895,7 +1895,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
pr_debug("Fvco=%dHz\n", target);
- /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ /* Find an appropriate FLL_FRATIO and factor it out of the target */
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index 5e0214d..3c71987 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -176,7 +176,7 @@ static int wm8995_pll_factors(struct device *dev,
return 0;
}
-/* Lookup table specifiying SRATE (table 25 in datasheet); some of the
+/* Lookup table specifying SRATE (table 25 in datasheet); some of the
* output frequencies have been rounded to the standard frequencies
* they are intended to match where the error is slight. */
static struct {
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 3b71dd6..500011e 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3137,7 +3137,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
pr_debug("FLL Fvco=%dHz\n", target);
- /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ /* Find an appropriate FLL_FRATIO and factor it out of the target */
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c
index 28fdfd6..3c2ee1b 100644
--- a/sound/soc/codecs/wm8991.c
+++ b/sound/soc/codecs/wm8991.c
@@ -981,7 +981,7 @@ static int wm8991_set_dai_pll(struct snd_soc_dai *codec_dai,
reg = snd_soc_read(codec, WM8991_CLOCKING_2);
snd_soc_write(codec, WM8991_CLOCKING_2, reg | WM8991_SYSCLK_SRC);
- /* set up N , fractional mode and pre-divisor if neccessary */
+ /* set up N , fractional mode and pre-divisor if necessary */
snd_soc_write(codec, WM8991_PLL1, pll_div.n | WM8991_SDM |
(pll_div.div2 ? WM8991_PRESCALE : 0));
snd_soc_write(codec, WM8991_PLL2, (u8)(pll_div.k>>8));
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index 379fa22..056aef9 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -324,7 +324,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
pr_debug("Fvco=%dHz\n", target);
- /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ /* Find an appropriate FLL_FRATIO and factor it out of the target */
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 3dc64c8..3290333 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -82,18 +82,18 @@ struct wm8994_priv {
int mbc_ena[3];
- /* Platform dependant DRC configuration */
+ /* Platform dependent DRC configuration */
const char **drc_texts;
int drc_cfg[WM8994_NUM_DRC];
struct soc_enum drc_enum;
- /* Platform dependant ReTune mobile configuration */
+ /* Platform dependent ReTune mobile configuration */
int num_retune_mobile_texts;
const char **retune_mobile_texts;
int retune_mobile_cfg[WM8994_NUM_EQ];
struct soc_enum retune_mobile_enum;
- /* Platform dependant MBC configuration */
+ /* Platform dependent MBC configuration */
int mbc_cfg;
const char **mbc_texts;
struct soc_enum mbc_enum;
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 55cdf29..91c6b39 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -305,7 +305,7 @@ static int speaker_mode_get(struct snd_kcontrol *kcontrol,
/*
* Stop any attempts to change speaker mode while the speaker is enabled.
*
- * We also have some special anti-pop controls dependant on speaker
+ * We also have some special anti-pop controls dependent on speaker
* mode which must be changed along with the mode.
*/
static int speaker_mode_put(struct snd_kcontrol *kcontrol,
@@ -456,7 +456,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
pr_debug("Fvco=%dHz\n", target);
- /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ /* Find an appropriate FLL_FRATIO and factor it out of the target */
for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
fll_div->fll_fratio = fll_fratios[i].fll_fratio;
OpenPOWER on IntegriCloud