diff options
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
| -rw-r--r-- | sound/soc/codecs/wm_hubs.c | 54 |
1 files changed, 38 insertions, 16 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 9e370d1..4cc2d56 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -63,8 +63,10 @@ static const struct soc_enum speaker_mode = static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op) { + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); unsigned int reg; int count = 0; + int timeout; unsigned int val; val = op | WM8993_DCS_ENA_CHAN_0 | WM8993_DCS_ENA_CHAN_1; @@ -74,18 +76,39 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op) dev_dbg(codec->dev, "Waiting for DC servo...\n"); + if (hubs->dcs_done_irq) + timeout = 4; + else + timeout = 400; + do { count++; - msleep(1); + + if (hubs->dcs_done_irq) + wait_for_completion_timeout(&hubs->dcs_done, + msecs_to_jiffies(250)); + else + msleep(1); + reg = snd_soc_read(codec, WM8993_DC_SERVO_0); dev_dbg(codec->dev, "DC servo: %x\n", reg); - } while (reg & op && count < 400); + } while (reg & op && count < timeout); if (reg & op) dev_err(codec->dev, "Timed out waiting for DC Servo %x\n", op); } +irqreturn_t wm_hubs_dcs_done(int irq, void *data) +{ + struct wm_hubs_data *hubs = data; + + complete(&hubs->dcs_done); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL_GPL(wm_hubs_dcs_done); + /* * Startup calibration of the DC servo */ @@ -107,8 +130,7 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) return; } - /* Devices not using a DCS code correction have startup mode */ - if (hubs->dcs_codes) { + if (hubs->series_startup) { /* Set for 32 series updates */ snd_soc_update_bits(codec, WM8993_DC_SERVO_1, WM8993_DCS_SERIES_NO_01_MASK, @@ -134,9 +156,9 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) break; case 1: reg = snd_soc_read(codec, WM8993_DC_SERVO_3); - reg_l = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK) + reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK) >> WM8993_DCS_DAC_WR_VAL_1_SHIFT; - reg_r = reg & WM8993_DCS_DAC_WR_VAL_0_MASK; + reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK; break; default: WARN(1, "Unknown DCS readback method\n"); @@ -150,13 +172,13 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) dev_dbg(codec->dev, "Applying %d code DC servo correction\n", hubs->dcs_codes); - /* HPOUT1L */ - offset = reg_l; + /* HPOUT1R */ + offset = reg_r; offset += hubs->dcs_codes; dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT; - /* HPOUT1R */ - offset = reg_r; + /* HPOUT1L */ + offset = reg_l; offset += hubs->dcs_codes; dcs_cfg |= (u8)offset; @@ -168,8 +190,8 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) WM8993_DCS_TRIG_DAC_WR_0 | WM8993_DCS_TRIG_DAC_WR_1); } else { - dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT; - dcs_cfg |= reg_r; + dcs_cfg = reg_r << WM8993_DCS_DAC_WR_VAL_1_SHIFT; + dcs_cfg |= reg_l; } /* Save the callibrated offset if we're in class W mode and @@ -195,7 +217,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, /* If we're applying an offset correction then updating the * callibration would be likely to introduce further offsets. */ - if (hubs->dcs_codes) + if (hubs->dcs_codes || hubs->no_series_update) return ret; /* Only need to do this if the outputs are active */ @@ -599,9 +621,6 @@ SND_SOC_DAPM_MIXER("IN2L PGA", WM8993_POWER_MANAGEMENT_2, 7, 0, SND_SOC_DAPM_MIXER("IN2R PGA", WM8993_POWER_MANAGEMENT_2, 5, 0, in2r_pga, ARRAY_SIZE(in2r_pga)), -/* Dummy widgets to represent differential paths */ -SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_MIXER("MIXINL", WM8993_POWER_MANAGEMENT_2, 9, 0, mixinl, ARRAY_SIZE(mixinl)), SND_SOC_DAPM_MIXER("MIXINR", WM8993_POWER_MANAGEMENT_2, 8, 0, @@ -867,8 +886,11 @@ EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_controls); int wm_hubs_add_analogue_routes(struct snd_soc_codec *codec, int lineout1_diff, int lineout2_diff) { + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); struct snd_soc_dapm_context *dapm = &codec->dapm; + init_completion(&hubs->dcs_done); + snd_soc_dapm_add_routes(dapm, analogue_routes, ARRAY_SIZE(analogue_routes)); |
