summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm_hubs.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
-rw-r--r--sound/soc/codecs/wm_hubs.c83
1 files changed, 51 insertions, 32 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 486bdd2..e1f225a 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -62,21 +62,27 @@ static const char *speaker_mode_text[] = {
static const struct soc_enum speaker_mode =
SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
-static void wait_for_dc_servo(struct snd_soc_codec *codec)
+static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op)
{
unsigned int reg;
int count = 0;
+ unsigned int val;
+
+ val = op | WM8993_DCS_ENA_CHAN_0 | WM8993_DCS_ENA_CHAN_1;
+
+ /* Trigger the command */
+ snd_soc_write(codec, WM8993_DC_SERVO_0, val);
dev_dbg(codec->dev, "Waiting for DC servo...\n");
do {
count++;
msleep(1);
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_0);
dev_dbg(codec->dev, "DC servo: %x\n", reg);
- } while (reg & WM8993_DCS_DATAPATH_BUSY && count < 400);
+ } while (reg & op && count < 400);
- if (reg & WM8993_DCS_DATAPATH_BUSY)
+ if (reg & op)
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
}
@@ -86,51 +92,58 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec)
static void calibrate_dc_servo(struct snd_soc_codec *codec)
{
struct wm_hubs_data *hubs = codec->private_data;
- u16 reg, dcs_cfg;
+ u16 reg, reg_l, reg_r, dcs_cfg;
/* Set for 32 series updates */
snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
WM8993_DCS_SERIES_NO_01_MASK,
32 << WM8993_DCS_SERIES_NO_01_SHIFT);
-
- /* Enable the DC servo. Write all bits to avoid triggering startup
- * or write calibration.
- */
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- 0xFFFF,
- WM8993_DCS_ENA_CHAN_0 |
- WM8993_DCS_ENA_CHAN_1 |
- WM8993_DCS_TRIG_SERIES_1 |
- WM8993_DCS_TRIG_SERIES_0);
-
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_SERIES_0 | WM8993_DCS_TRIG_SERIES_1);
/* Apply correction to DC servo result */
if (hubs->dcs_codes) {
dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
hubs->dcs_codes);
+ /* Different chips in the family support different
+ * readback methods.
+ */
+ switch (hubs->dcs_readback_mode) {
+ case 0:
+ reg_l = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1)
+ & WM8993_DCS_INTEG_CHAN_0_MASK;;
+ reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
+ & WM8993_DCS_INTEG_CHAN_1_MASK;
+ break;
+ case 1:
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+ reg_l = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
+ >> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+ reg_r = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
+ break;
+ default:
+ WARN(1, "Unknown DCS readback method");
+ break;
+ }
+
/* HPOUT1L */
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) &
- WM8993_DCS_INTEG_CHAN_0_MASK;;
- reg += hubs->dcs_codes;
- dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+ if (reg_l + hubs->dcs_codes > 0 &&
+ reg_l + hubs->dcs_codes < 0xff)
+ reg_l += hubs->dcs_codes;
+ dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
/* HPOUT1R */
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) &
- WM8993_DCS_INTEG_CHAN_1_MASK;
- reg += hubs->dcs_codes;
- dcs_cfg |= reg;
+ if (reg_r + hubs->dcs_codes > 0 &&
+ reg_r + hubs->dcs_codes < 0xff)
+ reg_r += hubs->dcs_codes;
+ dcs_cfg |= reg_r;
/* Do it */
snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- WM8993_DCS_TRIG_DAC_WR_0 |
- WM8993_DCS_TRIG_DAC_WR_1,
- WM8993_DCS_TRIG_DAC_WR_0 |
- WM8993_DCS_TRIG_DAC_WR_1);
-
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_DAC_WR_0 |
+ WM8993_DCS_TRIG_DAC_WR_1);
}
}
@@ -141,10 +154,16 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm_hubs_data *hubs = codec->private_data;
int ret;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ /* If we're applying an offset correction then updating the
+ * callibration would be likely to introduce further offsets. */
+ if (hubs->dcs_codes)
+ return ret;
+
/* Only need to do this if the outputs are active */
if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1)
& (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
OpenPOWER on IntegriCloud