diff options
Diffstat (limited to 'sound/soc/codecs/wm8962.c')
| -rw-r--r-- | sound/soc/codecs/wm8962.c | 22 |
1 files changed, 15 insertions, 7 deletions
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 2bf9ee7..3a2f96c 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1758,6 +1758,9 @@ SOC_DOUBLE_R_TLV("EQ4 Volume", WM8962_EQ3, WM8962_EQ23, WM8962_EQL_B4_GAIN_SHIFT, 31, 0, eq_tlv), SOC_DOUBLE_R_TLV("EQ5 Volume", WM8962_EQ3, WM8962_EQ23, WM8962_EQL_B5_GAIN_SHIFT, 31, 0, eq_tlv), +SND_SOC_BYTES("EQL Coefficients", WM8962_EQ4, 18), +SND_SOC_BYTES("EQR Coefficients", WM8962_EQ24, 18), + SOC_SINGLE("3D Switch", WM8962_THREED1, 0, 1, 0), SND_SOC_BYTES_MASK("3D Coefficients", WM8962_THREED1, 4, WM8962_THREED_ENA), @@ -1775,6 +1778,11 @@ WM8962_DSP2_ENABLE("HPF2 Switch", WM8962_HPF2_ENA_SHIFT), SND_SOC_BYTES("HPF Coefficients", WM8962_LHPF2, 1), WM8962_DSP2_ENABLE("HD Bass Switch", WM8962_HDBASS_ENA_SHIFT), SND_SOC_BYTES("HD Bass Coefficients", WM8962_HDBASS_AI_1, 30), + +SOC_DOUBLE("ALC Switch", WM8962_ALC1, WM8962_ALCL_ENA_SHIFT, + WM8962_ALCR_ENA_SHIFT, 1, 0), +SND_SOC_BYTES_MASK("ALC Coefficients", WM8962_ALC1, 4, + WM8962_ALCL_ENA_MASK | WM8962_ALCR_ENA_MASK), }; static const struct snd_kcontrol_new wm8962_spk_mono_controls[] = { @@ -3616,28 +3624,28 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, 0); /* Apply static configuration for GPIOs */ - for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) - if (pdata->gpio_init[i]) { + for (i = 0; i < ARRAY_SIZE(wm8962->pdata.gpio_init); i++) + if (wm8962->pdata.gpio_init[i]) { wm8962_set_gpio_mode(wm8962, i + 1); regmap_write(wm8962->regmap, 0x200 + i, - pdata->gpio_init[i] & 0xffff); + wm8962->pdata.gpio_init[i] & 0xffff); } /* Put the speakers into mono mode? */ - if (pdata->spk_mono) + if (wm8962->pdata.spk_mono) regmap_update_bits(wm8962->regmap, WM8962_CLASS_D_CONTROL_2, WM8962_SPK_MONO_MASK, WM8962_SPK_MONO); /* Micbias setup, detection enable and detection * threasholds. */ - if (pdata->mic_cfg) + if (wm8962->pdata.mic_cfg) regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, WM8962_MICDET_ENA | WM8962_MICDET_THR_MASK | WM8962_MICSHORT_THR_MASK | WM8962_MICBIAS_LVL, - pdata->mic_cfg); + wm8962->pdata.mic_cfg); /* Latch volume update bits */ regmap_update_bits(wm8962->regmap, WM8962_LEFT_INPUT_VOLUME, @@ -3682,7 +3690,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, } if (wm8962->irq) { - if (pdata->irq_active_low) { + if (wm8962->pdata.irq_active_low) { trigger = IRQF_TRIGGER_LOW; irq_pol = WM8962_IRQ_POL; } else { |
