summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8903.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
-rw-r--r--sound/soc/codecs/wm8903.c1813
1 files changed, 1813 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
new file mode 100644
index 0000000..a3f54ec
--- /dev/null
+++ b/sound/soc/codecs/wm8903.c
@@ -0,0 +1,1813 @@
+/*
+ * wm8903.c -- WM8903 ALSA SoC Audio driver
+ *
+ * Copyright 2008 Wolfson Microelectronics
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO:
+ * - TDM mode configuration.
+ * - Mic detect.
+ * - Digital microphone support.
+ * - Interrupt support (mic detect and sequencer).
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "wm8903.h"
+
+struct wm8903_priv {
+ int sysclk;
+
+ /* Reference counts */
+ int charge_pump_users;
+ int class_w_users;
+ int playback_active;
+ int capture_active;
+
+ struct snd_pcm_substream *master_substream;
+ struct snd_pcm_substream *slave_substream;
+};
+
+/* Register defaults at reset */
+static u16 wm8903_reg_defaults[] = {
+ 0x8903, /* R0 - SW Reset and ID */
+ 0x0000, /* R1 - Revision Number */
+ 0x0000, /* R2 */
+ 0x0000, /* R3 */
+ 0x0018, /* R4 - Bias Control 0 */
+ 0x0000, /* R5 - VMID Control 0 */
+ 0x0000, /* R6 - Mic Bias Control 0 */
+ 0x0000, /* R7 */
+ 0x0001, /* R8 - Analogue DAC 0 */
+ 0x0000, /* R9 */
+ 0x0001, /* R10 - Analogue ADC 0 */
+ 0x0000, /* R11 */
+ 0x0000, /* R12 - Power Management 0 */
+ 0x0000, /* R13 - Power Management 1 */
+ 0x0000, /* R14 - Power Management 2 */
+ 0x0000, /* R15 - Power Management 3 */
+ 0x0000, /* R16 - Power Management 4 */
+ 0x0000, /* R17 - Power Management 5 */
+ 0x0000, /* R18 - Power Management 6 */
+ 0x0000, /* R19 */
+ 0x0400, /* R20 - Clock Rates 0 */
+ 0x0D07, /* R21 - Clock Rates 1 */
+ 0x0000, /* R22 - Clock Rates 2 */
+ 0x0000, /* R23 */
+ 0x0050, /* R24 - Audio Interface 0 */
+ 0x0242, /* R25 - Audio Interface 1 */
+ 0x0008, /* R26 - Audio Interface 2 */
+ 0x0022, /* R27 - Audio Interface 3 */
+ 0x0000, /* R28 */
+ 0x0000, /* R29 */
+ 0x00C0, /* R30 - DAC Digital Volume Left */
+ 0x00C0, /* R31 - DAC Digital Volume Right */
+ 0x0000, /* R32 - DAC Digital 0 */
+ 0x0000, /* R33 - DAC Digital 1 */
+ 0x0000, /* R34 */
+ 0x0000, /* R35 */
+ 0x00C0, /* R36 - ADC Digital Volume Left */
+ 0x00C0, /* R37 - ADC Digital Volume Right */
+ 0x0000, /* R38 - ADC Digital 0 */
+ 0x0073, /* R39 - Digital Microphone 0 */
+ 0x09BF, /* R40 - DRC 0 */
+ 0x3241, /* R41 - DRC 1 */
+ 0x0020, /* R42 - DRC 2 */
+ 0x0000, /* R43 - DRC 3 */
+ 0x0085, /* R44 - Analogue Left Input 0 */
+ 0x0085, /* R45 - Analogue Right Input 0 */
+ 0x0044, /* R46 - Analogue Left Input 1 */
+ 0x0044, /* R47 - Analogue Right Input 1 */
+ 0x0000, /* R48 */
+ 0x0000, /* R49 */
+ 0x0008, /* R50 - Analogue Left Mix 0 */
+ 0x0004, /* R51 - Analogue Right Mix 0 */
+ 0x0000, /* R52 - Analogue Spk Mix Left 0 */
+ 0x0000, /* R53 - Analogue Spk Mix Left 1 */
+ 0x0000, /* R54 - Analogue Spk Mix Right 0 */
+ 0x0000, /* R55 - Analogue Spk Mix Right 1 */
+ 0x0000, /* R56 */
+ 0x002D, /* R57 - Analogue OUT1 Left */
+ 0x002D, /* R58 - Analogue OUT1 Right */
+ 0x0039, /* R59 - Analogue OUT2 Left */
+ 0x0039, /* R60 - Analogue OUT2 Right */
+ 0x0100, /* R61 */
+ 0x0139, /* R62 - Analogue OUT3 Left */
+ 0x0139, /* R63 - Analogue OUT3 Right */
+ 0x0000, /* R64 */
+ 0x0000, /* R65 - Analogue SPK Output Control 0 */
+ 0x0000, /* R66 */
+ 0x0010, /* R67 - DC Servo 0 */
+ 0x0100, /* R68 */
+ 0x00A4, /* R69 - DC Servo 2 */
+ 0x0807, /* R70 */
+ 0x0000, /* R71 */
+ 0x0000, /* R72 */
+ 0x0000, /* R73 */
+ 0x0000, /* R74 */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 */
+ 0x0000, /* R77 */
+ 0x0000, /* R78 */
+ 0x000E, /* R79 */
+ 0x0000, /* R80 */
+ 0x0000, /* R81 */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0006, /* R87 */
+ 0x0000, /* R88 */
+ 0x0000, /* R89 */
+ 0x0000, /* R90 - Analogue HP 0 */
+ 0x0060, /* R91 */
+ 0x0000, /* R92 */
+ 0x0000, /* R93 */
+ 0x0000, /* R94 - Analogue Lineout 0 */
+ 0x0060, /* R95 */
+ 0x0000, /* R96 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 - Charge Pump 0 */
+ 0x1F25, /* R99 */
+ 0x2B19, /* R100 */
+ 0x01C0, /* R101 */
+ 0x01EF, /* R102 */
+ 0x2B00, /* R103 */
+ 0x0000, /* R104 - Class W 0 */
+ 0x01C0, /* R105 */
+ 0x1C10, /* R106 */
+ 0x0000, /* R107 */
+ 0x0000, /* R108 - Write Sequencer 0 */
+ 0x0000, /* R109 - Write Sequencer 1 */
+ 0x0000, /* R110 - Write Sequencer 2 */
+ 0x0000, /* R111 - Write Sequencer 3 */
+ 0x0000, /* R112 - Write Sequencer 4 */
+ 0x0000, /* R113 */
+ 0x0000, /* R114 - Control Interface */
+ 0x0000, /* R115 */
+ 0x00A8, /* R116 - GPIO Control 1 */
+ 0x00A8, /* R117 - GPIO Control 2 */
+ 0x00A8, /* R118 - GPIO Control 3 */
+ 0x0220, /* R119 - GPIO Control 4 */
+ 0x01A0, /* R120 - GPIO Control 5 */
+ 0x0000, /* R121 - Interrupt Status 1 */
+ 0xFFFF, /* R122 - Interrupt Status 1 Mask */
+ 0x0000, /* R123 - Interrupt Polarity 1 */
+ 0x0000, /* R124 */
+ 0x0003, /* R125 */
+ 0x0000, /* R126 - Interrupt Control */
+ 0x0000, /* R127 */
+ 0x0005, /* R128 */
+ 0x0000, /* R129 - Control Interface Test 1 */
+ 0x0000, /* R130 */
+ 0x0000, /* R131 */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 */
+ 0x0000, /* R134 */
+ 0x03FF, /* R135 */
+ 0x0007, /* R136 */
+ 0x0040, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0000, /* R140 */
+ 0x0000, /* R141 */
+ 0x0000, /* R142 */
+ 0x0000, /* R143 */
+ 0x0000, /* R144 */
+ 0x0000, /* R145 */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x4000, /* R148 */
+ 0x6810, /* R149 - Charge Pump Test 1 */
+ 0x0004, /* R150 */
+ 0x0000, /* R151 */
+ 0x0000, /* R152 */
+ 0x0000, /* R153 */
+ 0x0000, /* R154 */
+ 0x0000, /* R155 */
+ 0x0000, /* R156 */
+ 0x0000, /* R157 */
+ 0x0000, /* R158 */
+ 0x0000, /* R159 */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 */
+ 0x0028, /* R164 - Clock Rate Test 4 */
+ 0x0004, /* R165 */
+ 0x0000, /* R166 */
+ 0x0060, /* R167 */
+ 0x0000, /* R168 */
+ 0x0000, /* R169 */
+ 0x0000, /* R170 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Analogue Output Bias 0 */
+};
+
+static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
+
+ return cache[reg];
+}
+
+static unsigned int wm8903_hw_read(struct snd_soc_codec *codec, u8 reg)
+{
+ struct i2c_msg xfer[2];
+ u16 data;
+ int ret;
+ struct i2c_client *client = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = &reg;
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret != 2) {
+ pr_err("i2c_transfer returned %d\n", ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static unsigned int wm8903_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ switch (reg) {
+ case WM8903_SW_RESET_AND_ID:
+ case WM8903_REVISION_NUMBER:
+ case WM8903_INTERRUPT_STATUS_1:
+ case WM8903_WRITE_SEQUENCER_4:
+ return wm8903_hw_read(codec, reg);
+
+ default:
+ return wm8903_read_reg_cache(codec, reg);
+ }
+}
+
+static void wm8903_write_reg_cache(struct snd_soc_codec *codec,
+ u16 reg, unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+
+ BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
+
+ switch (reg) {
+ case WM8903_SW_RESET_AND_ID:
+ case WM8903_REVISION_NUMBER:
+ break;
+
+ default:
+ cache[reg] = value;
+ break;
+ }
+}
+
+static int wm8903_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 data[3];
+
+ wm8903_write_reg_cache(codec, reg, value);
+
+ /* Data format is 1 byte of address followed by 2 bytes of data */
+ data[0] = reg;
+ data[1] = (value >> 8) & 0xff;
+ data[2] = value & 0xff;
+
+ if (codec->hw_write(codec->control_data, data, 3) == 2)
+ return 0;
+ else
+ return -EIO;
+}
+
+static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
+{
+ u16 reg[5];
+ struct i2c_client *i2c = codec->control_data;
+
+ BUG_ON(start > 48);
+
+ /* Enable the sequencer */
+ reg[0] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_0);
+ reg[0] |= WM8903_WSEQ_ENA;
+ wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
+
+ dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
+
+ wm8903_write(codec, WM8903_WRITE_SEQUENCER_3,
+ start | WM8903_WSEQ_START);
+
+ /* Wait for it to complete. If we have the interrupt wired up then
+ * we could block waiting for an interrupt, though polling may still
+ * be desirable for diagnostic purposes.
+ */
+ do {
+ msleep(10);
+
+ reg[4] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_4);
+ } while (reg[4] & WM8903_WSEQ_BUSY);
+
+ dev_dbg(&i2c->dev, "Sequence complete\n");
+
+ /* Disable the sequencer again */
+ wm8903_write(codec, WM8903_WRITE_SEQUENCER_0,
+ reg[0] & ~WM8903_WSEQ_ENA);
+
+ return 0;
+}
+
+static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache)
+{
+ int i;
+
+ /* There really ought to be something better we can do here :/ */
+ for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
+ cache[i] = wm8903_hw_read(codec, i);
+}
+
+static void wm8903_reset(struct snd_soc_codec *codec)
+{
+ wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+}
+
+#define WM8903_OUTPUT_SHORT 0x8
+#define WM8903_OUTPUT_OUT 0x4
+#define WM8903_OUTPUT_INT 0x2
+#define WM8903_OUTPUT_IN 0x1
+
+/*
+ * Event for headphone and line out amplifier power changes. Special
+ * power up/down sequences are required in order to maximise pop/click
+ * performance.
+ */
+static int wm8903_output_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8903_priv *wm8903 = codec->private_data;
+ struct i2c_client *i2c = codec->control_data;
+ u16 val;
+ u16 reg;
+ int shift;
+ u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0);
+
+ switch (w->reg) {
+ case WM8903_POWER_MANAGEMENT_2:
+ reg = WM8903_ANALOGUE_HP_0;
+ break;
+ case WM8903_POWER_MANAGEMENT_3:
+ reg = WM8903_ANALOGUE_LINEOUT_0;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (w->shift) {
+ case 0:
+ shift = 0;
+ break;
+ case 1:
+ shift = 4;
+ break;
+ default:
+ BUG();
+ }
+
+ if (event & SND_SOC_DAPM_PRE_PMU) {
+ val = wm8903_read(codec, reg);
+
+ /* Short the output */
+ val &= ~(WM8903_OUTPUT_SHORT << shift);
+ wm8903_write(codec, reg, val);
+
+ wm8903->charge_pump_users++;
+
+ dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
+ wm8903->charge_pump_users);
+
+ if (wm8903->charge_pump_users == 1) {
+ dev_dbg(&i2c->dev, "Enabling charge pump\n");
+ wm8903_write(codec, WM8903_CHARGE_PUMP_0,
+ cp_reg | WM8903_CP_ENA);
+ mdelay(4);
+ }
+ }
+
+ if (event & SND_SOC_DAPM_POST_PMU) {
+ val = wm8903_read(codec, reg);
+
+ val |= (WM8903_OUTPUT_IN << shift);
+ wm8903_write(codec, reg, val);
+
+ val |= (WM8903_OUTPUT_INT << shift);
+ wm8903_write(codec, reg, val);
+
+ /* Turn on the output ENA_OUTP */
+ val |= (WM8903_OUTPUT_OUT << shift);
+ wm8903_write(codec, reg, val);
+
+ /* Remove the short */
+ val |= (WM8903_OUTPUT_SHORT << shift);
+ wm8903_write(codec, reg, val);
+ }
+
+ if (event & SND_SOC_DAPM_PRE_PMD) {
+ val = wm8903_read(codec, reg);
+
+ /* Short the output */
+ val &= ~(WM8903_OUTPUT_SHORT << shift);
+ wm8903_write(codec, reg, val);
+
+ /* Then disable the intermediate and output stages */
+ val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
+ WM8903_OUTPUT_IN) << shift);
+ wm8903_write(codec, reg, val);
+ }
+
+ if (event & SND_SOC_DAPM_POST_PMD) {
+ wm8903->charge_pump_users--;
+
+ dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
+ wm8903->charge_pump_users);
+
+ if (wm8903->charge_pump_users == 0) {
+ dev_dbg(&i2c->dev, "Disabling charge pump\n");
+ wm8903_write(codec, WM8903_CHARGE_PUMP_0,
+ cp_reg & ~WM8903_CP_ENA);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * When used with DAC outputs only the WM8903 charge pump supports
+ * operation in class W mode, providing very low power consumption
+ * when used with digital sources. Enable and disable this mode
+ * automatically depending on the mixer configuration.
+ *
+ * All the relevant controls are simple switches.
+ */
+static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = widget->codec;
+ struct wm8903_priv *wm8903 = codec->private_data;
+ struct i2c_client *i2c = codec->control_data;
+ u16 reg;
+ int ret;
+
+ reg = wm8903_read(codec, WM8903_CLASS_W_0);
+
+ /* Turn it off if we're about to enable bypass */
+ if (ucontrol->value.integer.value[0]) {
+ if (wm8903->class_w_users == 0) {
+ dev_dbg(&i2c->dev, "Disabling Class W\n");
+ wm8903_write(codec, WM8903_CLASS_W_0, reg &
+ ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
+ }
+ wm8903->class_w_users++;
+ }
+
+ /* Implement the change */
+ ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
+
+ /* If we've just disabled the last bypass path turn Class W on */
+ if (!ucontrol->value.integer.value[0]) {
+ if (wm8903->class_w_users == 1) {
+ dev_dbg(&i2c->dev, "Enabling Class W\n");
+ wm8903_write(codec, WM8903_CLASS_W_0, reg |
+ WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
+ }
+ wm8903->class_w_users--;
+ }
+
+ dev_dbg(&i2c->dev, "Bypass use count now %d\n",
+ wm8903->class_w_users);
+
+ return ret;
+}
+
+#define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_volsw, \
+ .get = snd_soc_dapm_get_volsw, .put = wm8903_class_w_put, \
+ .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
+
+
+/* ALSA can only do steps of .01dB */
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0);
+
+static const char *drc_slope_text[] = {
+ "1", "1/2", "1/4", "1/8", "1/16", "0"
+};
+
+static const struct soc_enum drc_slope_r0 =
+ SOC_ENUM_SINGLE(WM8903_DRC_2, 3, 6, drc_slope_text);
+
+static const struct soc_enum drc_slope_r1 =
+ SOC_ENUM_SINGLE(WM8903_DRC_2, 0, 6, drc_slope_text);
+
+static const char *drc_attack_text[] = {
+ "instantaneous",
+ "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms",
+ "46.4ms", "92.8ms", "185.6ms"
+};
+
+static const struct soc_enum drc_attack =
+ SOC_ENUM_SINGLE(WM8903_DRC_1, 12, 11, drc_attack_text);
+
+static const char *drc_decay_text[] = {
+ "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s",
+ "23.87s", "47.56s"
+};
+
+static const struct soc_enum drc_decay =
+ SOC_ENUM_SINGLE(WM8903_DRC_1, 8, 9, drc_decay_text);
+
+static const char *drc_ff_delay_text[] = {
+ "5 samples", "9 samples"
+};
+
+static const struct soc_enum drc_ff_delay =
+ SOC_ENUM_SINGLE(WM8903_DRC_0, 5, 2, drc_ff_delay_text);
+
+static const char *drc_qr_decay_text[] = {
+ "0.725ms", "1.45ms", "5.8ms"
+};
+
+static const struct soc_enum drc_qr_decay =
+ SOC_ENUM_SINGLE(WM8903_DRC_1, 4, 3, drc_qr_decay_text);
+
+static const char *drc_smoothing_text[] = {
+ "Low", "Medium", "High"
+};
+
+static const struct soc_enum drc_smoothing =
+ SOC_ENUM_SINGLE(WM8903_DRC_0, 11, 3, drc_smoothing_text);
+
+static const char *soft_mute_text[] = {
+ "Fast (fs/2)", "Slow (fs/32)"
+};
+
+static const struct soc_enum soft_mute =
+ SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 10, 2, soft_mute_text);
+
+static const char *mute_mode_text[] = {
+ "Hard", "Soft"
+};
+
+static const struct soc_enum mute_mode =
+ SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 9, 2, mute_mode_text);
+
+static const char *dac_deemphasis_text[] = {
+ "Disabled", "32kHz", "44.1kHz", "48kHz"
+};
+
+static const struct soc_enum dac_deemphasis =
+ SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 1, 4, dac_deemphasis_text);
+
+static const char *companding_text[] = {
+ "ulaw", "alaw"
+};
+
+static const struct soc_enum dac_companding =
+ SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 0, 2, companding_text);
+
+static const struct soc_enum adc_companding =
+ SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 2, 2, companding_text);
+
+static const char *input_mode_text[] = {
+ "Single-Ended", "Differential Line", "Differential Mic"
+};
+
+static const struct soc_enum linput_mode_enum =
+ SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text);
+
+static const struct soc_enum rinput_mode_enum =
+ SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text);
+
+static const char *linput_mux_text[] = {
+ "IN1L", "IN2L", "IN3L"
+};
+
+static const struct soc_enum linput_enum =
+ SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 2, 3, linput_mux_text);
+
+static const struct soc_enum linput_inv_enum =
+ SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 4, 3, linput_mux_text);
+
+static const char *rinput_mux_text[] = {
+ "IN1R", "IN2R", "IN3R"
+};
+
+static const struct soc_enum rinput_enum =
+ SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 2, 3, rinput_mux_text);
+
+static const struct soc_enum rinput_inv_enum =
+ SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text);
+
+
+static const struct snd_kcontrol_new wm8903_snd_controls[] = {
+
+/* Input PGAs - No TLV since the scale depends on PGA mode */
+SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0,
+ 7, 1, 0),
+SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0,
+ 0, 31, 0),
+SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1,
+ 6, 1, 0),
+
+SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0,
+ 7, 1, 0),
+SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0,
+ 0, 31, 0),
+SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1,
+ 6, 1, 0),
+
+/* ADCs */
+SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
+SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
+SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
+SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8903_DRC_3, 5, 124, 1,
+ drc_tlv_thresh),
+SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
+SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
+SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max),
+SOC_ENUM("DRC Attack Rate", drc_attack),
+SOC_ENUM("DRC Decay Rate", drc_decay),
+SOC_ENUM("DRC FF Delay", drc_ff_delay),
+SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
+SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
+SOC_SINGLE_TLV("DRC QR Threashold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
+SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
+SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
+SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
+SOC_ENUM("DRC Smoothing Threashold", drc_smoothing),
+SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
+
+SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
+ WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
+SOC_ENUM("ADC Companding Mode", adc_companding),
+SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
+
+/* DAC */
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
+ WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
+SOC_ENUM("DAC Soft Mute Rate", soft_mute),
+SOC_ENUM("DAC Mute Mode", mute_mode),
+SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
+SOC_ENUM("DAC De-emphasis", dac_deemphasis),
+SOC_SINGLE("DAC Sloping Stopband Filter Switch",
+ WM8903_DAC_DIGITAL_1, 11, 1, 0),
+SOC_ENUM("DAC Companding Mode", dac_companding),
+SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
+
+/* Headphones */
+SOC_DOUBLE_R("Headphone Switch",
+ WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
+ 8, 1, 1),
+SOC_DOUBLE_R("Headphone ZC Switch",
+ WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
+ 6, 1, 0),
+SOC_DOUBLE_R_TLV("Headphone Volume",
+ WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
+ 0, 63, 0, out_tlv),
+
+/* Line out */
+SOC_DOUBLE_R("Line Out Switch",
+ WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
+ 8, 1, 1),
+SOC_DOUBLE_R("Line Out ZC Switch",
+ WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
+ 6, 1, 0),
+SOC_DOUBLE_R_TLV("Line Out Volume",
+ WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
+ 0, 63, 0, out_tlv),
+
+/* Speaker */
+SOC_DOUBLE_R("Speaker Switch",
+ WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1),
+SOC_DOUBLE_R("Speaker ZC Switch",
+ WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0),
+SOC_DOUBLE_R_TLV("Speaker Volume",
+ WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT,
+ 0, 63, 0, out_tlv),
+};
+
+static int wm8903_add_controls(struct snd_soc_codec *codec)
+{
+ int err, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8903_snd_controls); i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&wm8903_snd_controls[i],
+ codec, NULL));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new linput_mode_mux =
+ SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
+
+static const struct snd_kcontrol_new rinput_mode_mux =
+ SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum);
+
+static const struct snd_kcontrol_new linput_mux =
+ SOC_DAPM_ENUM("Left Input Mux", linput_enum);
+
+static const struct snd_kcontrol_new linput_inv_mux =
+ SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum);
+
+static const struct snd_kcontrol_new rinput_mux =
+ SOC_DAPM_ENUM("Right Input Mux", rinput_enum);
+
+static const struct snd_kcontrol_new rinput_inv_mux =
+ SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
+
+static const struct snd_kcontrol_new left_output_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
+SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_output_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
+SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_speaker_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
+ 1, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
+ 1, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
+ 1, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1L"),
+SND_SOC_DAPM_INPUT("IN1R"),
+SND_SOC_DAPM_INPUT("IN2L"),
+SND_SOC_DAPM_INPUT("IN2R"),
+SND_SOC_DAPM_INPUT("IN3L"),
+SND_SOC_DAPM_INPUT("IN3R"),
+
+SND_SOC_DAPM_OUTPUT("HPOUTL"),
+SND_SOC_DAPM_OUTPUT("HPOUTR"),
+SND_SOC_DAPM_OUTPUT("LINEOUTL"),
+SND_SOC_DAPM_OUTPUT("LINEOUTR"),
+SND_SOC_DAPM_OUTPUT("LOP"),
+SND_SOC_DAPM_OUTPUT("LON"),
+SND_SOC_DAPM_OUTPUT("ROP"),
+SND_SOC_DAPM_OUTPUT("RON"),
+
+SND_SOC_DAPM_MICBIAS("Mic Bias", WM8903_MIC_BIAS_CONTROL_0, 0, 0),
+
+SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
+SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
+ &linput_inv_mux),
+SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux),
+
+SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux),
+SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0,
+ &rinput_inv_mux),
+SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux),
+
+SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0),
+
+SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0),
+SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0,
+ left_output_mixer, ARRAY_SIZE(left_output_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0,
+ right_output_mixer, ARRAY_SIZE(right_output_mixer)),
+
+SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
+ left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
+SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
+ right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
+
+SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
+ 1, 0, NULL, 0, wm8903_output_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
+ 0, 0, NULL, 0, wm8903_output_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
+ NULL, 0, wm8903_output_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
+ NULL, 0, wm8903_output_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
+ NULL, 0),
+
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ { "Left Input Mux", "IN1L", "IN1L" },
+ { "Left Input Mux", "IN2L", "IN2L" },
+ { "Left Input Mux", "IN3L", "IN3L" },
+
+ { "Left Input Inverting Mux", "IN1L", "IN1L" },
+ { "Left Input Inverting Mux", "IN2L", "IN2L" },
+ { "Left Input Inverting Mux", "IN3L", "IN3L" },
+
+ { "Right Input Mux", "IN1R", "IN1R" },
+ { "Right Input Mux", "IN2R", "IN2R" },
+ { "Right Input Mux", "IN3R", "IN3R" },
+
+ { "Right Input Inverting Mux", "IN1R", "IN1R" },
+ { "Right Input Inverting Mux", "IN2R", "IN2R" },
+ { "Right Input Inverting Mux", "IN3R", "IN3R" },
+
+ { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" },
+ { "Left Input Mode Mux", "Differential Line",
+ "Left Input Mux" },
+ { "Left Input Mode Mux", "Differential Line",
+ "Left Input Inverting Mux" },
+ { "Left Input Mode Mux", "Differential Mic",
+ "Left Input Mux" },
+ { "Left Input Mode Mux", "Differential Mic",
+ "Left Input Inverting Mux" },
+
+ { "Right Input Mode Mux", "Single-Ended",
+ "Right Input Inverting Mux" },
+ { "Right Input Mode Mux", "Differential Line",
+ "Right Input Mux" },
+ { "Right Input Mode Mux", "Differential Line",
+ "Right Input Inverting Mux" },
+ { "Right Input Mode Mux", "Differential Mic",
+ "Right Input Mux" },
+ { "Right Input Mode Mux", "Differential Mic",
+ "Right Input Inverting Mux" },
+
+ { "Left Input PGA", NULL, "Left Input Mode Mux" },
+ { "Right Input PGA", NULL, "Right Input Mode Mux" },
+
+ { "ADCL", NULL, "Left Input PGA" },
+ { "ADCR", NULL, "Right Input PGA" },
+
+ { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
+ { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
+ { "Left Output Mixer", "DACL Switch", "DACL" },
+ { "Left Output Mixer", "DACR Switch", "DACR" },
+
+ { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" },
+ { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" },
+ { "Right Output Mixer", "DACL Switch", "DACL" },
+ { "Right Output Mixer", "DACR Switch", "DACR" },
+
+ { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
+ { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
+ { "Left Speaker Mixer", "DACL Switch", "DACL" },
+ { "Left Speaker Mixer", "DACR Switch", "DACR" },
+
+ { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
+ { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
+ { "Right Speaker Mixer", "DACL Switch", "DACL" },
+ { "Right Speaker Mixer", "DACR Switch", "DACR" },
+
+ { "Left Line Output PGA", NULL, "Left Output Mixer" },
+ { "Right Line Output PGA", NULL, "Right Output Mixer" },
+
+ { "Left Headphone Output PGA", NULL, "Left Output Mixer" },
+ { "Right Headphone Output PGA", NULL, "Right Output Mixer" },
+
+ { "Left Speaker PGA", NULL, "Left Speaker Mixer" },
+ { "Right Speaker PGA", NULL, "Right Speaker Mixer" },
+
+ { "HPOUTL", NULL, "Left Headphone Output PGA" },
+ { "HPOUTR", NULL, "Right Headphone Output PGA" },
+
+ { "LINEOUTL", NULL, "Left Line Output PGA" },
+ { "LINEOUTR", NULL, "Right Line Output PGA" },
+
+ { "LOP", NULL, "Left Speaker PGA" },
+ { "LON", NULL, "Left Speaker PGA" },
+
+ { "ROP", NULL, "Right Speaker PGA" },
+ { "RON", NULL, "Right Speaker PGA" },
+};
+
+static int wm8903_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8903_dapm_widgets,
+ ARRAY_SIZE(wm8903_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ snd_soc_dapm_new_widgets(codec);
+
+ return 0;
+}
+
+static int wm8903_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct i2c_client *i2c = codec->control_data;
+ u16 reg, reg2;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+ reg &= ~(WM8903_VMID_RES_MASK);
+ reg |= WM8903_VMID_RES_50K;
+ wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ wm8903_run_sequence(codec, 0);
+ wm8903_sync_reg_cache(codec, codec->reg_cache);
+
+ /* Enable low impedence charge pump output */
+ reg = wm8903_read(codec,
+ WM8903_CONTROL_INTERFACE_TEST_1);
+ wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+ reg | WM8903_TEST_KEY);
+ reg2 = wm8903_read(codec, WM8903_CHARGE_PUMP_TEST_1);
+ wm8903_write(codec, WM8903_CHARGE_PUMP_TEST_1,
+ reg2 | WM8903_CP_SW_KELVIN_MODE_MASK);
+ wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+ reg);
+
+ /* By default no bypass paths are enabled so
+ * enable Class W support.
+ */
+ dev_dbg(&i2c->dev, "Enabling Class W\n");
+ wm8903_write(codec, WM8903_CLASS_W_0, reg |
+ WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
+ }
+
+ reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+ reg &= ~(WM8903_VMID_RES_MASK);
+ reg |= WM8903_VMID_RES_250K;
+ wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ wm8903_run_sequence(codec, 32);
+ break;
+ }
+
+ codec->bias_level = level;
+
+ return 0;
+}
+
+static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8903_priv *wm8903 = codec->private_data;
+
+ wm8903->sysclk = freq;
+
+ return 0;
+}
+
+static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
+
+ aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
+ WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif1 |= WM8903_LRCLK_DIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif1 |= WM8903_BCLK_DIR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x3;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= 0x3 | WM8903_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x2;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ aif1 |= 0x1;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8903_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8903_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8903_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+
+ return 0;
+}
+
+static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 reg;
+
+ reg = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+
+ if (mute)
+ reg |= WM8903_DAC_MUTE;
+ else
+ reg &= ~WM8903_DAC_MUTE;
+
+ wm8903_write(codec, WM8903_DAC_DIGITAL_1, reg);
+
+ return 0;
+}
+
+/* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended
+ * for optimal performance so we list the lower rates first and match
+ * on the last match we find. */
+static struct {
+ int div;
+ int rate;
+ int mode;
+ int mclk_div;
+} clk_sys_ratios[] = {
+ { 64, 0x0, 0x0, 1 },
+ { 68, 0x0, 0x1, 1 },
+ { 125, 0x0, 0x2, 1 },
+ { 128, 0x1, 0x0, 1 },
+ { 136, 0x1, 0x1, 1 },
+ { 192, 0x2, 0x0, 1 },
+ { 204, 0x2, 0x1, 1 },
+
+ { 64, 0x0, 0x0, 2 },
+ { 68, 0x0, 0x1, 2 },
+ { 125, 0x0, 0x2, 2 },
+ { 128, 0x1, 0x0, 2 },
+ { 136, 0x1, 0x1, 2 },
+ { 192, 0x2, 0x0, 2 },
+ { 204, 0x2, 0x1, 2 },
+
+ { 250, 0x2, 0x2, 1 },
+ { 256, 0x3, 0x0, 1 },
+ { 272, 0x3, 0x1, 1 },
+ { 384, 0x4, 0x0, 1 },
+ { 408, 0x4, 0x1, 1 },
+ { 375, 0x4, 0x2, 1 },
+ { 512, 0x5, 0x0, 1 },
+ { 544, 0x5, 0x1, 1 },
+ { 500, 0x5, 0x2, 1 },
+ { 768, 0x6, 0x0, 1 },
+ { 816, 0x6, 0x1, 1 },
+ { 750, 0x6, 0x2, 1 },
+ { 1024, 0x7, 0x0, 1 },
+ { 1088, 0x7, 0x1, 1 },
+ { 1000, 0x7, 0x2, 1 },
+ { 1408, 0x8, 0x0, 1 },
+ { 1496, 0x8, 0x1, 1 },
+ { 1536, 0x9, 0x0, 1 },
+ { 1632, 0x9, 0x1, 1 },
+ { 1500, 0x9, 0x2, 1 },
+
+ { 250, 0x2, 0x2, 2 },
+ { 256, 0x3, 0x0, 2 },
+ { 272, 0x3, 0x1, 2 },
+ { 384, 0x4, 0x0, 2 },
+ { 408, 0x4, 0x1, 2 },
+ { 375, 0x4, 0x2, 2 },
+ { 512, 0x5, 0x0, 2 },
+ { 544, 0x5, 0x1, 2 },
+ { 500, 0x5, 0x2, 2 },
+ { 768, 0x6, 0x0, 2 },
+ { 816, 0x6, 0x1, 2 },
+ { 750, 0x6, 0x2, 2 },
+ { 1024, 0x7, 0x0, 2 },
+ { 1088, 0x7, 0x1, 2 },
+ { 1000, 0x7, 0x2, 2 },
+ { 1408, 0x8, 0x0, 2 },
+ { 1496, 0x8, 0x1, 2 },
+ { 1536, 0x9, 0x0, 2 },
+ { 1632, 0x9, 0x1, 2 },
+ { 1500, 0x9, 0x2, 2 },
+};
+
+/* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */
+static struct {
+ int ratio;
+ int div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 50, 5 },
+ { 55, 6 },
+ { 60, 7 },
+ { 80, 8 },
+ { 100, 9 },
+ { 110, 10 },
+ { 120, 11 },
+ { 160, 12 },
+ { 200, 13 },
+ { 220, 14 },
+ { 240, 15 },
+ { 250, 16 },
+ { 300, 17 },
+ { 320, 18 },
+ { 440, 19 },
+ { 480, 20 },
+};
+
+/* Sample rates for DSP */
+static struct {
+ int rate;
+ int value;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 2 },
+ { 16000, 3 },
+ { 22050, 4 },
+ { 24000, 5 },
+ { 32000, 6 },
+ { 44100, 7 },
+ { 48000, 8 },
+ { 88200, 9 },
+ { 96000, 10 },
+ { 0, 0 },
+};
+
+static int wm8903_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct wm8903_priv *wm8903 = codec->private_data;
+ struct i2c_client *i2c = codec->control_data;
+ struct snd_pcm_runtime *master_runtime;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ wm8903->playback_active++;
+ else
+ wm8903->capture_active++;
+
+ /* The DAI has shared clocks so if we already have a playback or
+ * capture going then constrain this substream to match it.
+ */
+ if (wm8903->master_substream) {
+ master_runtime = wm8903->master_substream->runtime;
+
+ dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
+ master_runtime->sample_bits,
+ master_runtime->rate);
+
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_RATE,
+ master_runtime->rate,
+ master_runtime->rate);
+
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+ master_runtime->sample_bits,
+ master_runtime->sample_bits);
+
+ wm8903->slave_substream = substream;
+ } else
+ wm8903->master_substream = substream;
+
+ return 0;
+}
+
+static void wm8903_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct wm8903_priv *wm8903 = codec->private_data;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ wm8903->playback_active--;
+ else
+ wm8903->capture_active--;
+
+ if (wm8903->master_substream == substream)
+ wm8903->master_substream = wm8903->slave_substream;
+
+ wm8903->slave_substream = NULL;
+}
+
+static int wm8903_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct wm8903_priv *wm8903 = codec->private_data;
+ struct i2c_client *i2c = codec->control_data;
+ int fs = params_rate(params);
+ int bclk;
+ int bclk_div;
+ int i;
+ int dsp_config;
+ int clk_config;
+ int best_val;
+ int cur_val;
+ int clk_sys;
+
+ u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
+ u16 aif2 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_2);
+ u16 aif3 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_3);
+ u16 clock0 = wm8903_read(codec, WM8903_CLOCK_RATES_0);
+ u16 clock1 = wm8903_read(codec, WM8903_CLOCK_RATES_1);
+
+ if (substream == wm8903->slave_substream) {
+ dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
+ return 0;
+ }
+
+ /* Configure sample rate logic for DSP - choose nearest rate */
+ dsp_config = 0;
+ best_val = abs(sample_rates[dsp_config].rate - fs);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ cur_val = abs(sample_rates[i].rate - fs);
+ if (cur_val <= best_val) {
+ dsp_config = i;
+ best_val = cur_val;
+ }
+ }
+
+ /* Constraints should stop us hitting this but let's make sure */
+ if (wm8903->capture_active)
+ switch (sample_rates[dsp_config].rate) {
+ case 88200:
+ case 96000:
+ dev_err(&i2c->dev, "%dHz unsupported by ADC\n",
+ fs);
+ return -EINVAL;
+
+ default:
+ break;
+ }
+
+ dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
+ clock1 &= ~WM8903_SAMPLE_RATE_MASK;
+ clock1 |= sample_rates[dsp_config].value;
+
+ aif1 &= ~WM8903_AIF_WL_MASK;
+ bclk = 2 * fs;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ bclk *= 20;
+ aif1 |= 0x4;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bclk *= 24;
+ aif1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bclk *= 32;
+ aif1 |= 0xc;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n",
+ wm8903->sysclk, fs);
+
+ /* We may not have an MCLK which allows us to generate exactly
+ * the clock we want, particularly with USB derived inputs, so
+ * approximate.
+ */
+ clk_config = 0;
+ best_val = abs((wm8903->sysclk /
+ (clk_sys_ratios[0].mclk_div *
+ clk_sys_ratios[0].div)) - fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) {
+ cur_val = abs((wm8903->sysclk /
+ (clk_sys_ratios[i].mclk_div *
+ clk_sys_ratios[i].div)) - fs);
+
+ if (cur_val <= best_val) {
+ clk_config = i;
+ best_val = cur_val;
+ }
+ }
+
+ if (clk_sys_ratios[clk_config].mclk_div == 2) {
+ clock0 |= WM8903_MCLKDIV2;
+ clk_sys = wm8903->sysclk / 2;
+ } else {
+ clock0 &= ~WM8903_MCLKDIV2;
+ clk_sys = wm8903->sysclk;
+ }
+
+ clock1 &= ~(WM8903_CLK_SYS_RATE_MASK |
+ WM8903_CLK_SYS_MODE_MASK);
+ clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
+ clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
+
+ dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
+ clk_sys_ratios[clk_config].rate,
+ clk_sys_ratios[clk_config].mode,
+ clk_sys_ratios[clk_config].div);
+
+ dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
+
+ /* We may not get quite the right frequency if using
+ * approximate clocks so look for the closest match that is
+ * higher than the target (we need to ensure that there enough
+ * BCLKs to clock out the samples).
+ */
+ bclk_div = 0;
+ best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk;
+ i = 1;
+ while (i < ARRAY_SIZE(bclk_divs)) {
+ cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk;
+ if (cur_val < 0) /* BCLK table is sorted */
+ break;
+ bclk_div = i;
+ best_val = cur_val;
+ i++;
+ }
+
+ aif2 &= ~WM8903_BCLK_DIV_MASK;
+ aif3 &= ~WM8903_LRCLK_RATE_MASK;
+
+ dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
+ bclk_divs[bclk_div].ratio / 10, bclk,
+ (clk_sys * 10) / bclk_divs[bclk_div].ratio);
+
+ aif2 |= bclk_divs[bclk_div].div;
+ aif3 |= bclk / fs;
+
+ wm8903_write(codec, WM8903_CLOCK_RATES_0, clock0);
+ wm8903_write(codec, WM8903_CLOCK_RATES_1, clock1);
+ wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+ wm8903_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
+ wm8903_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
+
+ return 0;
+}
+
+#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
+ SNDRV_PCM_RATE_11025 | \
+ SNDRV_PCM_RATE_16000 | \
+ SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | \
+ SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | \
+ SNDRV_PCM_RATE_88200 | \
+ SNDRV_PCM_RATE_96000)
+
+#define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\
+ SNDRV_PCM_RATE_11025 | \
+ SNDRV_PCM_RATE_16000 | \
+ SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | \
+ SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000)
+
+#define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+struct snd_soc_dai wm8903_dai = {
+ .name = "WM8903",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8903_PLAYBACK_RATES,
+ .formats = WM8903_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8903_CAPTURE_RATES,
+ .formats = WM8903_FORMATS,
+ },
+ .ops = {
+ .startup = wm8903_startup,
+ .shutdown = wm8903_shutdown,
+ .hw_params = wm8903_hw_params,
+ },
+ .dai_ops = {
+ .digital_mute = wm8903_digital_mute,
+ .set_fmt = wm8903_set_dai_fmt,
+ .set_sysclk = wm8903_set_dai_sysclk
+ }
+};
+EXPORT_SYMBOL_GPL(wm8903_dai);
+
+static int wm8903_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8903_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+ struct i2c_client *i2c = codec->control_data;
+ int i;
+ u16 *reg_cache = codec->reg_cache;
+ u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults),
+ GFP_KERNEL);
+
+ /* Bring the codec back up to standby first to minimise pop/clicks */
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ wm8903_set_bias_level(codec, codec->suspend_bias_level);
+
+ /* Sync back everything else */
+ if (tmp_cache) {
+ for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
+ if (tmp_cache[i] != reg_cache[i])
+ wm8903_write(codec, i, tmp_cache[i]);
+ } else {
+ dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
+ }
+
+ return 0;
+}
+
+/*
+ * initialise the WM8903 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int wm8903_init(struct snd_soc_device *socdev)
+{
+ struct snd_soc_codec *codec = socdev->codec;
+ struct i2c_client *i2c = codec->control_data;
+ int ret = 0;
+ u16 val;
+
+ val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+ if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
+ dev_err(&i2c->dev,
+ "Device with ID register %x is not a WM8903\n", val);
+ return -ENODEV;
+ }
+
+ codec->name = "WM8903";
+ codec->owner = THIS_MODULE;
+ codec->read = wm8903_read;
+ codec->write = wm8903_write;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8903_set_bias_level;
+ codec->dai = &wm8903_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults);
+ codec->reg_cache = kmemdup(wm8903_reg_defaults,
+ sizeof(wm8903_reg_defaults),
+ GFP_KERNEL);
+ if (codec->reg_cache == NULL) {
+ dev_err(&i2c->dev, "Failed to allocate register cache\n");
+ return -ENOMEM;
+ }
+
+ val = wm8903_read(codec, WM8903_REVISION_NUMBER);
+ dev_info(&i2c->dev, "WM8903 revision %d\n",
+ val & WM8903_CHIP_REV_MASK);
+
+ wm8903_reset(codec);
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ /* SYSCLK is required for pretty much anything */
+ wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
+
+ /* power on device */
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Latch volume update bits */
+ val = wm8903_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
+ val |= WM8903_ADCVU;
+ wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
+ wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
+
+ val = wm8903_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
+ val |= WM8903_DACVU;
+ wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
+ wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
+
+ val = wm8903_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
+ val |= WM8903_HPOUTVU;
+ wm8903_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
+ wm8903_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
+
+ val = wm8903_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
+ val |= WM8903_LINEOUTVU;
+ wm8903_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
+ wm8903_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
+
+ val = wm8903_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
+ val |= WM8903_SPKVU;
+ wm8903_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
+ wm8903_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
+
+ /* Enable DAC soft mute by default */
+ val = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+ val |= WM8903_DAC_MUTEMODE;
+ wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
+
+ wm8903_add_controls(codec);
+ wm8903_add_widgets(codec);
+ ret = snd_soc_register_card(socdev);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "wm8903: failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ kfree(codec->reg_cache);
+ return ret;
+}
+
+static struct snd_soc_device *wm8903_socdev;
+
+static int wm8903_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct snd_soc_device *socdev = wm8903_socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ int ret;
+
+ i2c_set_clientdata(i2c, codec);
+ codec->control_data = i2c;
+
+ ret = wm8903_init(socdev);
+ if (ret < 0)
+ dev_err(&i2c->dev, "Device initialisation failed\n");
+
+ return ret;
+}
+
+static int wm8903_i2c_remove(struct i2c_client *client)
+{
+ struct snd_soc_codec *codec = i2c_get_clientdata(client);
+ kfree(codec->reg_cache);
+ return 0;
+}
+
+/* i2c codec control layer */
+static const struct i2c_device_id wm8903_i2c_id[] = {
+ { "wm8903", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
+
+static struct i2c_driver wm8903_i2c_driver = {
+ .driver = {
+ .name = "WM8903",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8903_i2c_probe,
+ .remove = wm8903_i2c_remove,
+ .id_table = wm8903_i2c_id,
+};
+
+static int wm8903_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct wm8903_setup_data *setup;
+ struct snd_soc_codec *codec;
+ struct wm8903_priv *wm8903;
+ struct i2c_board_info board_info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *i2c_client;
+ int ret = 0;
+
+ setup = socdev->codec_data;
+
+ if (!setup->i2c_address) {
+ dev_err(&pdev->dev, "No codec address provided\n");
+ return -ENODEV;
+ }
+
+ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (codec == NULL)
+ return -ENOMEM;
+
+ wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+ if (wm8903 == NULL) {
+ ret = -ENOMEM;
+ goto err_codec;
+ }
+
+ codec->private_data = wm8903;
+ socdev->codec = codec;
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ wm8903_socdev = socdev;
+
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ ret = i2c_add_driver(&wm8903_i2c_driver);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "can't add i2c driver\n");
+ goto err_priv;
+ } else {
+ memset(&board_info, 0, sizeof(board_info));
+ strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE);
+ board_info.addr = setup->i2c_address;
+
+ adapter = i2c_get_adapter(setup->i2c_bus);
+ if (!adapter) {
+ dev_err(&pdev->dev, "Can't get I2C bus %d\n",
+ setup->i2c_bus);
+ ret = -ENODEV;
+ goto err_adapter;
+ }
+
+ i2c_client = i2c_new_device(adapter, &board_info);
+ i2c_put_adapter(adapter);
+ if (i2c_client == NULL) {
+ dev_err(&pdev->dev,
+ "I2C driver registration failed\n");
+ ret = -ENODEV;
+ goto err_adapter;
+ }
+ }
+
+ return ret;
+
+err_adapter:
+ i2c_del_driver(&wm8903_i2c_driver);
+err_priv:
+ kfree(codec->private_data);
+err_codec:
+ kfree(codec);
+ return ret;
+}
+
+/* power down chip */
+static int wm8903_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ if (codec->control_data)
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+ i2c_unregister_device(socdev->codec->control_data);
+ i2c_del_driver(&wm8903_i2c_driver);
+ kfree(codec->private_data);
+ kfree(codec);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8903 = {
+ .probe = wm8903_probe,
+ .remove = wm8903_remove,
+ .suspend = wm8903_suspend,
+ .resume = wm8903_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
+
+MODULE_DESCRIPTION("ASoC WM8903 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud