diff options
Diffstat (limited to 'sound/soc/codecs/tlv320dac33.c')
-rw-r--r-- | sound/soc/codecs/tlv320dac33.c | 180 |
1 files changed, 127 insertions, 53 deletions
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 65adc77..8651b01 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -49,8 +49,6 @@ #define NSAMPLE_MAX 5700 -#define LATENCY_TIME_MS 20 - #define MODE7_LTHR 10 #define MODE7_UTHR (DAC33_BUFFER_SIZE_SAMPLES - 10) @@ -62,6 +60,9 @@ #define US_TO_SAMPLES(rate, us) \ (rate / (1000000 / us)) +#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \ + ((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate))) + static void dac33_calculate_times(struct snd_pcm_substream *substream); static int dac33_prepare_chip(struct snd_pcm_substream *substream); @@ -107,6 +108,10 @@ struct tlv320dac33_priv { * this */ enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */ unsigned int nsample; /* burst read amount from host */ + int mode1_latency; /* latency caused by the i2c writes in + * us */ + int auto_fifo_config; /* Configure the FIFO based on the + * period size */ u8 burst_bclkdiv; /* BCLK divider value in burst mode */ unsigned int burst_rate; /* Interface speed in Burst modes */ @@ -120,6 +125,8 @@ struct tlv320dac33_priv { * samples */ unsigned int mode7_us_to_lthr; /* Time to reach lthr from uthr */ + unsigned int uthr; + enum dac33_state state; }; @@ -442,6 +449,39 @@ static int dac33_set_nsample(struct snd_kcontrol *kcontrol, return ret; } +static int dac33_get_uthr(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); + + ucontrol->value.integer.value[0] = dac33->uthr; + + return 0; +} + +static int dac33_set_uthr(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); + int ret = 0; + + if (dac33->substream) + return -EBUSY; + + if (dac33->uthr == ucontrol->value.integer.value[0]) + return 0; + + if (ucontrol->value.integer.value[0] < (MODE7_LTHR + 10) || + ucontrol->value.integer.value[0] > MODE7_UTHR) + ret = -EINVAL; + else + dac33->uthr = ucontrol->value.integer.value[0]; + + return ret; +} + static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -503,13 +543,18 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = { DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1), }; -static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = { - SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0, - dac33_get_nsample, dac33_set_nsample), +static const struct snd_kcontrol_new dac33_mode_snd_controls[] = { SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum, dac33_get_fifo_mode, dac33_set_fifo_mode), }; +static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = { + SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0, + dac33_get_nsample, dac33_set_nsample), + SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0, + dac33_get_uthr, dac33_set_uthr), +}; + /* Analog bypass */ static const struct snd_kcontrol_new dac33_dapm_abypassl_control = SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1); @@ -612,7 +657,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33) switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: dac33_write16(codec, DAC33_NSAMPLE_MSB, - DAC33_THRREG(dac33->nsample + dac33->alarm_threshold)); + DAC33_THRREG(dac33->nsample)); /* Take the timestamps */ spin_lock_irq(&dac33->lock); @@ -761,6 +806,10 @@ static void dac33_shutdown(struct snd_pcm_substream *substream, struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); dac33->substream = NULL; + + /* Reset the nSample restrictions */ + dac33->nsample_min = 0; + dac33->nsample_max = NSAMPLE_MAX; } static int dac33_hw_params(struct snd_pcm_substream *substream, @@ -985,7 +1034,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) * Configure the threshold levels, and leave 10 sample space * at the bottom, and also at the top of the FIFO */ - dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(MODE7_UTHR)); + dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(dac33->uthr)); dac33_write16(codec, DAC33_LTHR_MSB, DAC33_THRREG(MODE7_LTHR)); break; default: @@ -1003,57 +1052,71 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) struct snd_soc_device *socdev = rtd->socdev; struct snd_soc_codec *codec = socdev->card->codec; struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); + unsigned int period_size = substream->runtime->period_size; + unsigned int rate = substream->runtime->rate; unsigned int nsample_limit; /* In bypass mode we don't need to calculate */ if (!dac33->fifo_mode) return; - /* Number of samples (16bit, stereo) in one period */ - dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4; - - /* Number of samples (16bit, stereo) in ALSA buffer */ - dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4; - /* Subtract one period from the total */ - dac33->nsample_max -= dac33->nsample_min; - - /* Number of samples for LATENCY_TIME_MS / 2 */ - dac33->alarm_threshold = substream->runtime->rate / - (1000 / (LATENCY_TIME_MS / 2)); - - /* Find and fix up the lowest nsmaple limit */ - nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS); - - if (dac33->nsample_min < nsample_limit) - dac33->nsample_min = nsample_limit; - - if (dac33->nsample < dac33->nsample_min) - dac33->nsample = dac33->nsample_min; - - /* - * Find and fix up the highest nsmaple limit - * In order to not overflow the DAC33 buffer substract the - * alarm_threshold value from the size of the DAC33 buffer - */ - nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold; - - if (dac33->nsample_max > nsample_limit) - dac33->nsample_max = nsample_limit; - - if (dac33->nsample > dac33->nsample_max) - dac33->nsample = dac33->nsample_max; - switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: + /* Number of samples under i2c latency */ + dac33->alarm_threshold = US_TO_SAMPLES(rate, + dac33->mode1_latency); + if (dac33->auto_fifo_config) { + if (period_size <= dac33->alarm_threshold) + /* + * Configure nSamaple to number of periods, + * which covers the latency requironment. + */ + dac33->nsample = period_size * + ((dac33->alarm_threshold / period_size) + + (dac33->alarm_threshold % period_size ? + 1 : 0)); + else + dac33->nsample = period_size; + } else { + /* nSample time shall not be shorter than i2c latency */ + dac33->nsample_min = dac33->alarm_threshold; + /* + * nSample should not be bigger than alsa buffer minus + * size of one period to avoid overruns + */ + dac33->nsample_max = substream->runtime->buffer_size - + period_size; + nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - + dac33->alarm_threshold; + if (dac33->nsample_max > nsample_limit) + dac33->nsample_max = nsample_limit; + + /* Correct the nSample if it is outside of the ranges */ + if (dac33->nsample < dac33->nsample_min) + dac33->nsample = dac33->nsample_min; + if (dac33->nsample > dac33->nsample_max) + dac33->nsample = dac33->nsample_max; + } + dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate, dac33->nsample); dac33->t_stamp1 = 0; dac33->t_stamp2 = 0; break; case DAC33_FIFO_MODE7: + if (dac33->auto_fifo_config) { + dac33->uthr = UTHR_FROM_PERIOD_SIZE( + period_size, + rate, + dac33->burst_rate) + 9; + if (dac33->uthr > MODE7_UTHR) + dac33->uthr = MODE7_UTHR; + if (dac33->uthr < (MODE7_LTHR + 10)) + dac33->uthr = (MODE7_LTHR + 10); + } dac33->mode7_us_to_lthr = - SAMPLES_TO_US(substream->runtime->rate, - MODE7_UTHR - MODE7_LTHR + 1); + SAMPLES_TO_US(substream->runtime->rate, + dac33->uthr - MODE7_LTHR + 1); dac33->t_stamp1 = 0; break; default: @@ -1104,7 +1167,7 @@ static snd_pcm_sframes_t dac33_dai_delay( struct snd_soc_codec *codec = socdev->card->codec; struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); unsigned long long t0, t1, t_now; - unsigned int time_delta; + unsigned int time_delta, uthr; int samples_out, samples_in, samples; snd_pcm_sframes_t delay = 0; @@ -1182,6 +1245,7 @@ static snd_pcm_sframes_t dac33_dai_delay( case DAC33_FIFO_MODE7: spin_lock(&dac33->lock); t0 = dac33->t_stamp1; + uthr = dac33->uthr; spin_unlock(&dac33->lock); t_now = ktime_to_us(ktime_get()); @@ -1194,7 +1258,7 @@ static snd_pcm_sframes_t dac33_dai_delay( * Either the timestamps are messed or equal. Report * maximum delay */ - delay = MODE7_UTHR; + delay = uthr; goto out; } @@ -1208,8 +1272,8 @@ static snd_pcm_sframes_t dac33_dai_delay( substream->runtime->rate, time_delta); - if (likely(MODE7_UTHR > samples_out)) - delay = MODE7_UTHR - samples_out; + if (likely(uthr > samples_out)) + delay = uthr - samples_out; else delay = 0; } else { @@ -1227,8 +1291,8 @@ static snd_pcm_sframes_t dac33_dai_delay( time_delta); delay = MODE7_LTHR + samples_in - samples_out; - if (unlikely(delay > MODE7_UTHR)) - delay = MODE7_UTHR; + if (unlikely(delay > uthr)) + delay = uthr; } break; default: @@ -1347,10 +1411,15 @@ static int dac33_soc_probe(struct platform_device *pdev) snd_soc_add_controls(codec, dac33_snd_controls, ARRAY_SIZE(dac33_snd_controls)); - /* Only add the nSample controls, if we have valid IRQ number */ - if (dac33->irq >= 0) - snd_soc_add_controls(codec, dac33_nsample_snd_controls, - ARRAY_SIZE(dac33_nsample_snd_controls)); + /* Only add the FIFO controls, if we have valid IRQ number */ + if (dac33->irq >= 0) { + snd_soc_add_controls(codec, dac33_mode_snd_controls, + ARRAY_SIZE(dac33_mode_snd_controls)); + /* FIFO usage controls only, if autoio config is not selected */ + if (!dac33->auto_fifo_config) + snd_soc_add_controls(codec, dac33_fifo_snd_controls, + ARRAY_SIZE(dac33_fifo_snd_controls)); + } dac33_add_widgets(codec); @@ -1481,9 +1550,14 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, /* Pre calculate the burst rate */ dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32; dac33->keep_bclk = pdata->keep_bclk; + dac33->auto_fifo_config = pdata->auto_fifo_config; + dac33->mode1_latency = pdata->mode1_latency; + if (!dac33->mode1_latency) + dac33->mode1_latency = 10000; /* 10ms */ dac33->irq = client->irq; dac33->nsample = NSAMPLE_MAX; dac33->nsample_max = NSAMPLE_MAX; + dac33->uthr = MODE7_UTHR; /* Disable FIFO use by default */ dac33->fifo_mode = DAC33_FIFO_BYPASS; |