diff options
Diffstat (limited to 'sound/soc/codecs/nau8825.c')
-rw-r--r-- | sound/soc/codecs/nau8825.c | 76 |
1 files changed, 62 insertions, 14 deletions
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 97fbeba..46a30ea 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1612,7 +1612,6 @@ static int nau8825_jack_insert(struct nau8825 *nau8825) snd_soc_dapm_sync(dapm); break; case 2: - case 3: dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n"); type = SND_JACK_HEADSET; @@ -1632,6 +1631,11 @@ static int nau8825_jack_insert(struct nau8825 *nau8825) snd_soc_dapm_force_enable_pin(dapm, "SAR"); snd_soc_dapm_sync(dapm); break; + case 3: + /* detect error case */ + dev_err(nau8825->dev, "detection error; disable mic function\n"); + type = SND_JACK_HEADPHONE; + break; } /* Leaving HPOL/R grounded after jack insert by default. They will be @@ -1682,7 +1686,7 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { if (nau8825_is_jack_inserted(regmap)) { event |= nau8825_jack_insert(nau8825); - if (!nau8825->high_imped) { + if (!nau8825->xtalk_bypass && !nau8825->high_imped) { /* Apply the cross talk suppression in the * headset without high impedance. */ @@ -2328,6 +2332,13 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, break; case SND_SOC_BIAS_OFF: + /* Reset the configuration of jack type for detection */ + /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0); + /* ground HPL/HPR, MICGRND1/2 */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_HSD_CTRL, 0xf, 0xf); /* Cancel and reset cross talk detection funciton */ nau8825_xtalk_cancel(nau8825); /* Turn off all interruptions before system shutdown. Keep the @@ -2351,6 +2362,10 @@ static int __maybe_unused nau8825_suspend(struct snd_soc_codec *codec) disable_irq(nau8825->irq); snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_OFF); + /* Power down codec power; don't suppoet button wakeup */ + snd_soc_dapm_disable_pin(nau8825->dapm, "SAR"); + snd_soc_dapm_disable_pin(nau8825->dapm, "MICBIAS"); + snd_soc_dapm_sync(nau8825->dapm); regcache_cache_only(nau8825->regmap, true); regcache_mark_dirty(nau8825->regmap); @@ -2425,10 +2440,13 @@ static void nau8825_print_device_properties(struct nau8825 *nau8825) nau8825->jack_insert_debounce); dev_dbg(dev, "jack-eject-debounce: %d\n", nau8825->jack_eject_debounce); + dev_dbg(dev, "crosstalk-bypass: %d\n", + nau8825->xtalk_bypass); } static int nau8825_read_device_properties(struct device *dev, struct nau8825 *nau8825) { + int ret; nau8825->jkdet_enable = device_property_read_bool(dev, "nuvoton,jkdet-enable"); @@ -2436,30 +2454,60 @@ static int nau8825_read_device_properties(struct device *dev, "nuvoton,jkdet-pull-enable"); nau8825->jkdet_pull_up = device_property_read_bool(dev, "nuvoton,jkdet-pull-up"); - device_property_read_u32(dev, "nuvoton,jkdet-polarity", + ret = device_property_read_u32(dev, "nuvoton,jkdet-polarity", &nau8825->jkdet_polarity); - device_property_read_u32(dev, "nuvoton,micbias-voltage", + if (ret) + nau8825->jkdet_polarity = 1; + ret = device_property_read_u32(dev, "nuvoton,micbias-voltage", &nau8825->micbias_voltage); - device_property_read_u32(dev, "nuvoton,vref-impedance", + if (ret) + nau8825->micbias_voltage = 6; + ret = device_property_read_u32(dev, "nuvoton,vref-impedance", &nau8825->vref_impedance); - device_property_read_u32(dev, "nuvoton,sar-threshold-num", + if (ret) + nau8825->vref_impedance = 2; + ret = device_property_read_u32(dev, "nuvoton,sar-threshold-num", &nau8825->sar_threshold_num); - device_property_read_u32_array(dev, "nuvoton,sar-threshold", + if (ret) + nau8825->sar_threshold_num = 4; + ret = device_property_read_u32_array(dev, "nuvoton,sar-threshold", nau8825->sar_threshold, nau8825->sar_threshold_num); - device_property_read_u32(dev, "nuvoton,sar-hysteresis", + if (ret) { + nau8825->sar_threshold[0] = 0x08; + nau8825->sar_threshold[1] = 0x12; + nau8825->sar_threshold[2] = 0x26; + nau8825->sar_threshold[3] = 0x73; + } + ret = device_property_read_u32(dev, "nuvoton,sar-hysteresis", &nau8825->sar_hysteresis); - device_property_read_u32(dev, "nuvoton,sar-voltage", + if (ret) + nau8825->sar_hysteresis = 0; + ret = device_property_read_u32(dev, "nuvoton,sar-voltage", &nau8825->sar_voltage); - device_property_read_u32(dev, "nuvoton,sar-compare-time", + if (ret) + nau8825->sar_voltage = 6; + ret = device_property_read_u32(dev, "nuvoton,sar-compare-time", &nau8825->sar_compare_time); - device_property_read_u32(dev, "nuvoton,sar-sampling-time", + if (ret) + nau8825->sar_compare_time = 1; + ret = device_property_read_u32(dev, "nuvoton,sar-sampling-time", &nau8825->sar_sampling_time); - device_property_read_u32(dev, "nuvoton,short-key-debounce", + if (ret) + nau8825->sar_sampling_time = 1; + ret = device_property_read_u32(dev, "nuvoton,short-key-debounce", &nau8825->key_debounce); - device_property_read_u32(dev, "nuvoton,jack-insert-debounce", + if (ret) + nau8825->key_debounce = 3; + ret = device_property_read_u32(dev, "nuvoton,jack-insert-debounce", &nau8825->jack_insert_debounce); - device_property_read_u32(dev, "nuvoton,jack-eject-debounce", + if (ret) + nau8825->jack_insert_debounce = 7; + ret = device_property_read_u32(dev, "nuvoton,jack-eject-debounce", &nau8825->jack_eject_debounce); + if (ret) + nau8825->jack_eject_debounce = 0; + nau8825->xtalk_bypass = device_property_read_bool(dev, + "nuvoton,crosstalk-bypass"); nau8825->mclk = devm_clk_get(dev, "mclk"); if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) { |