diff options
Diffstat (limited to 'sound/soc/codecs/cs4270.c')
| -rw-r--r-- | sound/soc/codecs/cs4270.c | 162 |
1 files changed, 48 insertions, 114 deletions
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 6d4bdc6..8b51245 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -106,6 +106,21 @@ #define CS4270_MUTE_DAC_A 0x01 #define CS4270_MUTE_DAC_B 0x02 +/* Power-on default values for the registers + * + * This array contains the power-on default values of the registers, with the + * exception of the "CHIPID" register (01h). The lower four bits of that + * register contain the hardware revision, so it is treated as volatile. + * + * Also note that on the CS4270, the first readable register is 1, but ASoC + * assumes the first register is 0. Therfore, the array must have an entry for + * register 0, but we use cs4270_reg_is_readable() to tell ASoC that it can't + * be read. + */ +static const u8 cs4270_default_reg_cache[CS4270_LASTREG + 1] = { + 0x00, 0x00, 0x00, 0x30, 0x00, 0x60, 0x20, 0x00, 0x00 +}; + static const char *supply_names[] = { "va", "vd", "vlc" }; @@ -114,7 +129,6 @@ static const char *supply_names[] = { struct cs4270_private { enum snd_soc_control_type control_type; void *control_data; - u8 reg_cache[CS4270_NUMREGS]; unsigned int mclk; /* Input frequency of the MCLK pin */ unsigned int mode; /* The mode (I2S or left-justified) */ unsigned int slave_mode; @@ -179,6 +193,20 @@ static struct cs4270_mode_ratios cs4270_mode_ratios[] = { /* The number of MCLK/LRCK ratios supported by the CS4270 */ #define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios) +static int cs4270_reg_is_readable(unsigned int reg) +{ + return (reg >= CS4270_FIRSTREG) && (reg <= CS4270_LASTREG); +} + +static int cs4270_reg_is_volatile(unsigned int reg) +{ + /* Unreadable registers are considered volatile */ + if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG)) + return 1; + + return reg == CS4270_CHIPID; +} + /** * cs4270_set_dai_sysclk - determine the CS4270 samples rates. * @codec_dai: the codec DAI @@ -264,97 +292,6 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, } /** - * cs4270_fill_cache - pre-fill the CS4270 register cache. - * @codec: the codec for this CS4270 - * - * This function fills in the CS4270 register cache by reading the register - * values from the hardware. - * - * This CS4270 registers are cached to avoid excessive I2C I/O operations. - * After the initial read to pre-fill the cache, the CS4270 never updates - * the register values, so we won't have a cache coherency problem. - * - * We use the auto-increment feature of the CS4270 to read all registers in - * one shot. - */ -static int cs4270_fill_cache(struct snd_soc_codec *codec) -{ - u8 *cache = codec->reg_cache; - struct i2c_client *i2c_client = codec->control_data; - s32 length; - - length = i2c_smbus_read_i2c_block_data(i2c_client, - CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache); - - if (length != CS4270_NUMREGS) { - dev_err(codec->dev, "i2c read failure, addr=0x%x\n", - i2c_client->addr); - return -EIO; - } - - return 0; -} - -/** - * cs4270_read_reg_cache - read from the CS4270 register cache. - * @codec: the codec for this CS4270 - * @reg: the register to read - * - * This function returns the value for a given register. It reads only from - * the register cache, not the hardware itself. - * - * This CS4270 registers are cached to avoid excessive I2C I/O operations. - * After the initial read to pre-fill the cache, the CS4270 never updates - * the register values, so we won't have a cache coherency problem. - */ -static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec, - unsigned int reg) -{ - u8 *cache = codec->reg_cache; - - if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG)) - return -EIO; - - return cache[reg - CS4270_FIRSTREG]; -} - -/** - * cs4270_i2c_write - write to a CS4270 register via the I2C bus. - * @codec: the codec for this CS4270 - * @reg: the register to write - * @value: the value to write to the register - * - * This function writes the given value to the given CS4270 register, and - * also updates the register cache. - * - * Note that we don't use the hw_write function pointer of snd_soc_codec. - * That's because it's too clunky: the hw_write_t prototype does not match - * i2c_smbus_write_byte_data(), and it's just another layer of overhead. - */ -static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, - unsigned int value) -{ - u8 *cache = codec->reg_cache; - - if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG)) - return -EIO; - - /* Only perform an I2C operation if the new value is different */ - if (cache[reg - CS4270_FIRSTREG] != value) { - struct i2c_client *client = codec->control_data; - if (i2c_smbus_write_byte_data(client, reg, value)) { - dev_err(codec->dev, "i2c write failed\n"); - return -EIO; - } - - /* We've written to the hardware, so update the cache */ - cache[reg - CS4270_FIRSTREG] = value; - } - - return 0; -} - -/** * cs4270_hw_params - program the CS4270 with the given hardware parameters. * @substream: the audio stream * @params: the hardware parameters to set @@ -551,15 +488,16 @@ static struct snd_soc_dai_driver cs4270_dai = { static int cs4270_probe(struct snd_soc_codec *codec) { struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); - int i, ret, reg; + int i, ret; codec->control_data = cs4270->control_data; - /* The I2C interface is set up, so pre-fill our register cache */ - - ret = cs4270_fill_cache(codec); + /* Tell ASoC what kind of I/O to use to read the registers. ASoC will + * then do the I2C transactions itself. + */ + ret = snd_soc_codec_set_cache_io(codec, 8, 8, cs4270->control_type); if (ret < 0) { - dev_err(codec->dev, "failed to fill register cache\n"); + dev_err(codec->dev, "failed to set cache I/O (ret=%i)\n", ret); return ret; } @@ -568,10 +506,7 @@ static int cs4270_probe(struct snd_soc_codec *codec) * this feature disabled by default. An application (e.g. alsactl) can * re-enabled it by using the controls. */ - - reg = cs4270_read_reg_cache(codec, CS4270_MUTE); - reg &= ~CS4270_MUTE_AUTO; - ret = cs4270_i2c_write(codec, CS4270_MUTE, reg); + ret = snd_soc_update_bits(codec, CS4270_MUTE, CS4270_MUTE_AUTO, 0); if (ret < 0) { dev_err(codec->dev, "i2c write failed\n"); return ret; @@ -582,10 +517,8 @@ static int cs4270_probe(struct snd_soc_codec *codec) * playback has started. An application (e.g. alsactl) can * re-enabled it by using the controls. */ - - reg = cs4270_read_reg_cache(codec, CS4270_TRANS); - reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); - ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); + ret = snd_soc_update_bits(codec, CS4270_TRANS, + CS4270_TRANS_SOFT | CS4270_TRANS_ZERO, 0); if (ret < 0) { dev_err(codec->dev, "i2c write failed\n"); return ret; @@ -708,15 +641,16 @@ static int cs4270_soc_resume(struct snd_soc_codec *codec) * Assign this variable to the codec_dev field of the machine driver's * snd_soc_device structure. */ -static struct snd_soc_codec_driver soc_codec_device_cs4270 = { - .probe = cs4270_probe, - .remove = cs4270_remove, - .suspend = cs4270_soc_suspend, - .resume = cs4270_soc_resume, - .read = cs4270_read_reg_cache, - .write = cs4270_i2c_write, - .reg_cache_size = CS4270_NUMREGS, - .reg_word_size = sizeof(u8), +static const struct snd_soc_codec_driver soc_codec_device_cs4270 = { + .probe = cs4270_probe, + .remove = cs4270_remove, + .suspend = cs4270_soc_suspend, + .resume = cs4270_soc_resume, + .volatile_register = cs4270_reg_is_volatile, + .readable_register = cs4270_reg_is_readable, + .reg_cache_size = CS4270_LASTREG + 1, + .reg_word_size = sizeof(u8), + .reg_cache_default = cs4270_default_reg_cache, }; /** |
