diff options
Diffstat (limited to 'sound/soc/codecs/cs4270.c')
| -rw-r--r-- | sound/soc/codecs/cs4270.c | 667 |
1 files changed, 338 insertions, 329 deletions
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f1aa0c3..7fa09a3 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -3,27 +3,22 @@ * * Author: Timur Tabi <timur@freescale.com> * - * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * Copyright 2007-2009 Freescale Semiconductor, Inc. This file is licensed + * under the terms of the GNU General Public License version 2. This + * program is licensed "as is" without any warranty of any kind, whether + * express or implied. * * This is an ASoC device driver for the Cirrus Logic CS4270 codec. * * Current features/limitations: * - * 1) Software mode is supported. Stand-alone mode is automatically - * selected if I2C is disabled or if a CS4270 is not found on the I2C - * bus. However, stand-alone mode is only partially implemented because - * there is no mechanism yet for this driver and the machine driver to - * communicate the values of the M0, M1, MCLK1, and MCLK2 pins. - * 2) Only I2C is supported, not SPI - * 3) Only Master mode is supported, not Slave. - * 4) The machine driver's 'startup' function must call - * cs4270_set_dai_sysclk() with the value of MCLK. - * 5) Only I2S and left-justified modes are supported - * 6) Power management is not supported - * 7) The only supported control is volume and hardware mute (if enabled) + * - Software mode is supported. Stand-alone mode is not supported. + * - Only I2C is supported, not SPI + * - Support for master and slave mode + * - The machine driver's 'startup' function must call + * cs4270_set_dai_sysclk() with the value of MCLK. + * - Only I2S and left-justified modes are supported + * - Power management is not supported */ #include <linux/module.h> @@ -35,18 +30,6 @@ #include "cs4270.h" -/* If I2C is defined, then we support software mode. However, if we're - not compiled as module but I2C is, then we can't use I2C calls. */ -#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) -#define USE_I2C -#endif - -/* Private data for the CS4270 */ -struct cs4270_private { - unsigned int mclk; /* Input frequency of the MCLK pin */ - unsigned int mode; /* The mode (I2S or left-justified) */ -}; - /* * The codec isn't really big-endian or little-endian, since the I2S * interface requires data to be sent serially with the MSbit first. @@ -60,8 +43,6 @@ struct cs4270_private { SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE) -#ifdef USE_I2C - /* CS4270 registers addresses */ #define CS4270_CHIPID 0x01 /* Chip ID */ #define CS4270_PWRCTL 0x02 /* Power Control */ @@ -121,8 +102,22 @@ struct cs4270_private { #define CS4270_MUTE_DAC_A 0x01 #define CS4270_MUTE_DAC_B 0x02 -/* - * Clock Ratio Selection for Master Mode with I2C enabled +/* Private data for the CS4270 */ +struct cs4270_private { + struct snd_soc_codec codec; + u8 reg_cache[CS4270_NUMREGS]; + unsigned int mclk; /* Input frequency of the MCLK pin */ + unsigned int mode; /* The mode (I2S or left-justified) */ + unsigned int slave_mode; +}; + +/** + * struct cs4270_mode_ratios - clock ratio tables + * @ratio: the ratio of MCLK to the sample rate + * @speed_mode: the Speed Mode bits to set in the Mode Control register for + * this ratio + * @mclk: the Ratio Select bits to set in the Mode Control register for this + * ratio * * The data for this chart is taken from Table 5 of the CS4270 reference * manual. @@ -131,31 +126,30 @@ struct cs4270_private { * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling * rates the CS4270 currently supports. * - * Each element in this array corresponds to the ratios in mclk_ratios[]. - * These two arrays need to be in sync. - * - * 'speed_mode' is the corresponding bit pattern to be written to the + * @speed_mode is the corresponding bit pattern to be written to the * MODE bits of the Mode Control Register * - * 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of + * @mclk is the corresponding bit pattern to be wirten to the MCLK bits of * the Mode Control Register. * * In situations where a single ratio is represented by multiple speed * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick * double-speed instead of quad-speed. However, the CS4270 errata states - * that Divide-By-1.5 can cause failures, so we avoid that mode where + * that divide-By-1.5 can cause failures, so we avoid that mode where * possible. * - * ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not - * work if VD = 3.3V. If this effects you, select the + * Errata: There is an errata for the CS4270 where divide-by-1.5 does not + * work if Vd is 3.3V. If this effects you, select the * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will * never select any sample rates that require divide-by-1.5. */ -static struct { +struct cs4270_mode_ratios { unsigned int ratio; u8 speed_mode; u8 mclk; -} cs4270_mode_ratios[] = { +}; + +static struct cs4270_mode_ratios cs4270_mode_ratios[] = { {64, CS4270_MODE_4X, CS4270_MODE_DIV1}, #ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA {96, CS4270_MODE_4X, CS4270_MODE_DIV15}, @@ -172,34 +166,27 @@ static struct { /* The number of MCLK/LRCK ratios supported by the CS4270 */ #define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios) -/* - * Determine the CS4270 samples rates. +/** + * cs4270_set_dai_sysclk - determine the CS4270 samples rates. + * @codec_dai: the codec DAI + * @clk_id: the clock ID (ignored) + * @freq: the MCLK input frequency + * @dir: the clock direction (ignored) * - * 'freq' is the input frequency to MCLK. The other parameters are ignored. + * This function is used to tell the codec driver what the input MCLK + * frequency is. * * The value of MCLK is used to determine which sample rates are supported * by the CS4270. The ratio of MCLK / Fs must be equal to one of nine - * support values: 64, 96, 128, 192, 256, 384, 512, 768, and 1024. + * supported values - 64, 96, 128, 192, 256, 384, 512, 768, and 1024. * * This function calculates the nine ratios and determines which ones match * a standard sample rate. If there's a match, then it is added to the list - * of support sample rates. + * of supported sample rates. * * This function must be called by the machine driver's 'startup' function, * otherwise the list of supported sample rates will not be available in * time for ALSA. - * - * Note that in stand-alone mode, the sample rate is determined by input - * pins M0, M1, MDIV1, and MDIV2. Also in stand-alone mode, divide-by-3 - * is not a programmable option. However, divide-by-3 is not an available - * option in stand-alone mode. This cases two problems: a ratio of 768 is - * not available (it requires divide-by-3) and B) ratios 192 and 384 can - * only be selected with divide-by-1.5, but there is an errate that make - * this selection difficult. - * - * In addition, there is no mechanism for communicating with the machine - * driver what the input settings can be. This would need to be implemented - * for stand-alone mode to work. */ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) @@ -225,7 +212,7 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, rates &= ~SNDRV_PCM_RATE_KNOT; if (!rates) { - printk(KERN_ERR "cs4270: could not find a valid sample rate\n"); + dev_err(codec->dev, "could not find a valid sample rate\n"); return -EINVAL; } @@ -240,8 +227,10 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, return 0; } -/* - * Configure the codec for the selected audio format +/** + * cs4270_set_dai_fmt - configure the codec for the selected audio format + * @codec_dai: the codec DAI + * @format: a SND_SOC_DAIFMT_x value indicating the data format * * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the * codec accordingly. @@ -258,32 +247,43 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, struct cs4270_private *cs4270 = codec->private_data; int ret = 0; + /* set DAI format */ switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: case SND_SOC_DAIFMT_LEFT_J: cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK; break; default: - printk(KERN_ERR "cs4270: invalid DAI format\n"); + dev_err(codec->dev, "invalid dai format\n"); + ret = -EINVAL; + } + + /* set master/slave audio interface */ + switch (format & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + cs4270->slave_mode = 1; + break; + case SND_SOC_DAIFMT_CBM_CFM: + cs4270->slave_mode = 0; + break; + default: + /* all other modes are unsupported by the hardware */ ret = -EINVAL; } return ret; } -/* - * A list of addresses on which this CS4270 could use. I2C addresses are - * 7 bits. For the CS4270, the upper four bits are always 1001, and the - * lower three bits are determined via the AD2, AD1, and AD0 pins - * (respectively). - */ -static const unsigned short normal_i2c[] = { - 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, I2C_CLIENT_END -}; -I2C_CLIENT_INSMOD; - -/* - * Pre-fill the CS4270 register cache. +/** + * cs4270_fill_cache - pre-fill the CS4270 register cache. + * @codec: the codec for this CS4270 + * + * This function fills in the CS4270 register cache by reading the register + * values from the hardware. + * + * This CS4270 registers are cached to avoid excessive I2C I/O operations. + * After the initial read to pre-fill the cache, the CS4270 never updates + * the register values, so we won't have a cache coherency problem. * * We use the auto-increment feature of the CS4270 to read all registers in * one shot. @@ -298,7 +298,7 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec) CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache); if (length != CS4270_NUMREGS) { - printk(KERN_ERR "cs4270: I2C read failure, addr=0x%x\n", + dev_err(codec->dev, "i2c read failure, addr=0x%x\n", i2c_client->addr); return -EIO; } @@ -306,12 +306,17 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec) return 0; } -/* - * Read from the CS4270 register cache. +/** + * cs4270_read_reg_cache - read from the CS4270 register cache. + * @codec: the codec for this CS4270 + * @reg: the register to read + * + * This function returns the value for a given register. It reads only from + * the register cache, not the hardware itself. * * This CS4270 registers are cached to avoid excessive I2C I/O operations. * After the initial read to pre-fill the cache, the CS4270 never updates - * the register values, so we won't have a cache coherncy problem. + * the register values, so we won't have a cache coherency problem. */ static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec, unsigned int reg) @@ -324,8 +329,11 @@ static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec, return cache[reg - CS4270_FIRSTREG]; } -/* - * Write to a CS4270 register via the I2C bus. +/** + * cs4270_i2c_write - write to a CS4270 register via the I2C bus. + * @codec: the codec for this CS4270 + * @reg: the register to write + * @value: the value to write to the register * * This function writes the given value to the given CS4270 register, and * also updates the register cache. @@ -346,7 +354,7 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, if (cache[reg - CS4270_FIRSTREG] != value) { struct i2c_client *client = codec->control_data; if (i2c_smbus_write_byte_data(client, reg, value)) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return -EIO; } @@ -357,11 +365,17 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } -/* - * Program the CS4270 with the given hardware parameters. +/** + * cs4270_hw_params - program the CS4270 with the given hardware parameters. + * @substream: the audio stream + * @params: the hardware parameters to set + * @dai: the SOC DAI (ignored) + * + * This function programs the hardware with the values provided. + * Specifically, the sample rate and the data format. * - * The .ops functions are used to provide board-specific data, like - * input frequencies, to this driver. This function takes that information, + * The .ops functions are used to provide board-specific data, like input + * frequencies, to this driver. This function takes that information, * combines it with the hardware parameters provided, and programs the * hardware accordingly. */ @@ -371,7 +385,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct cs4270_private *cs4270 = codec->private_data; int ret; unsigned int i; @@ -391,33 +405,28 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, if (i == NUM_MCLK_RATIOS) { /* We did not find a matching ratio */ - printk(KERN_ERR "cs4270: could not find matching ratio\n"); + dev_err(codec->dev, "could not find matching ratio\n"); return -EINVAL; } - /* Freeze and power-down the codec */ - - ret = snd_soc_write(codec, CS4270_PWRCTL, CS4270_PWRCTL_FREEZE | - CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | - CS4270_PWRCTL_PDN); - if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); - return ret; - } - - /* Program the mode control register */ + /* Set the sample rate */ reg = snd_soc_read(codec, CS4270_MODE); reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK); - reg |= cs4270_mode_ratios[i].speed_mode | cs4270_mode_ratios[i].mclk; + reg |= cs4270_mode_ratios[i].mclk; + + if (cs4270->slave_mode) + reg |= CS4270_MODE_SLAVE; + else + reg |= cs4270_mode_ratios[i].speed_mode; ret = snd_soc_write(codec, CS4270_MODE, reg); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } - /* Program the format register */ + /* Set the DAI format */ reg = snd_soc_read(codec, CS4270_FORMAT); reg &= ~(CS4270_FORMAT_DAC_MASK | CS4270_FORMAT_ADC_MASK); @@ -430,55 +439,23 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, reg |= CS4270_FORMAT_DAC_LJ | CS4270_FORMAT_ADC_LJ; break; default: - printk(KERN_ERR "cs4270: unknown format\n"); + dev_err(codec->dev, "unknown dai format\n"); return -EINVAL; } ret = snd_soc_write(codec, CS4270_FORMAT, reg); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); - return ret; - } - - /* Disable auto-mute. This feature appears to be buggy, because in - some situations, auto-mute will not deactivate when it should. */ - - reg = snd_soc_read(codec, CS4270_MUTE); - reg &= ~CS4270_MUTE_AUTO; - ret = snd_soc_write(codec, CS4270_MUTE, reg); - if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); - return ret; - } - - /* Disable automatic volume control. It's enabled by default, and - * it causes volume change commands to be delayed, sometimes until - * after playback has started. - */ - - reg = cs4270_read_reg_cache(codec, CS4270_TRANS); - reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); - ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); - if (ret < 0) { - printk(KERN_ERR "I2C write failed\n"); - return ret; - } - - /* Thaw and power-up the codec */ - - ret = snd_soc_write(codec, CS4270_PWRCTL, 0); - if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } return ret; } -#ifdef CONFIG_SND_SOC_CS4270_HWMUTE - -/* - * Set the CS4270 external mute +/** + * cs4270_mute - enable/disable the CS4270 external mute + * @dai: the SOC DAI + * @mute: 0 = disable mute, 1 = enable mute * * This function toggles the mute bits in the MUTE register. The CS4270's * mute capability is intended for external muting circuitry, so if the @@ -493,276 +470,306 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute) reg6 = snd_soc_read(codec, CS4270_MUTE); if (mute) - reg6 |= CS4270_MUTE_ADC_A | CS4270_MUTE_ADC_B | - CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B; + reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B; else - reg6 &= ~(CS4270_MUTE_ADC_A | CS4270_MUTE_ADC_B | - CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B); + reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B); return snd_soc_write(codec, CS4270_MUTE, reg6); } -#endif - -static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *); - /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { SOC_DOUBLE_R("Master Playback Volume", - CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1) -}; - -static const struct i2c_device_id cs4270_id[] = { - {"cs4270", 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, cs4270_id); - -static struct i2c_driver cs4270_i2c_driver = { - .driver = { - .name = "CS4270 I2C", - .owner = THIS_MODULE, - }, - .id_table = cs4270_id, - .probe = cs4270_i2c_probe, + CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1), + SOC_SINGLE("Digital Sidetone Switch", CS4270_FORMAT, 5, 1, 0), + SOC_SINGLE("Soft Ramp Switch", CS4270_TRANS, 6, 1, 0), + SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0), + SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1), + SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0), + SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0) }; /* - * Global variable to store socdev for i2c probe function. + * cs4270_codec - global variable to store codec for the ASoC probe function * * If struct i2c_driver had a private_data field, we wouldn't need to use - * cs4270_socdec. This is the only way to pass the socdev structure to - * cs4270_i2c_probe(). - * - * The real solution to cs4270_socdev is to create a mechanism - * that maps I2C addresses to snd_soc_device structures. Perhaps the - * creation of the snd_soc_device object should be moved out of - * cs4270_probe() and into cs4270_i2c_probe(), but that would make this - * driver dependent on I2C. The CS4270 supports "stand-alone" mode, whereby - * the chip is *not* connected to the I2C bus, but is instead configured via - * input pins. + * cs4270_codec. This is the only way to pass the codec structure from + * cs4270_i2c_probe() to cs4270_probe(). Unfortunately, there is no good + * way to synchronize these two functions. cs4270_i2c_probe() can be called + * multiple times before cs4270_probe() is called even once. So for now, we + * also only allow cs4270_i2c_probe() to be run once. That means that we do + * not support more than one cs4270 device in the system, at least for now. */ -static struct snd_soc_device *cs4270_socdev; +static struct snd_soc_codec *cs4270_codec; -/* - * Initialize the I2C interface of the CS4270 - * - * This function is called for whenever the I2C subsystem finds a device - * at a particular address. +static struct snd_soc_dai_ops cs4270_dai_ops = { + .hw_params = cs4270_hw_params, + .set_sysclk = cs4270_set_dai_sysclk, + .set_fmt = cs4270_set_dai_fmt, + .digital_mute = cs4270_mute, +}; + +struct snd_soc_dai cs4270_dai = { + .name = "cs4270", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = 0, + .formats = CS4270_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = 0, + .formats = CS4270_FORMATS, + }, + .ops = &cs4270_dai_ops, +}; +EXPORT_SYMBOL_GPL(cs4270_dai); + +/** + * cs4270_probe - ASoC probe function + * @pdev: platform device * - * Note: snd_soc_new_pcms() must be called before this function can be called, - * because of snd_ctl_add(). + * This function is called when ASoC has all the pieces it needs to + * instantiate a sound driver. */ -static int cs4270_i2c_probe(struct i2c_client *i2c_client, - const struct i2c_device_id *id) +static int cs4270_probe(struct platform_device *pdev) { - struct snd_soc_device *socdev = cs4270_socdev; - struct snd_soc_codec *codec = socdev->codec; - int i; - int ret = 0; - - /* Probing all possible addresses has one drawback: if there are - multiple CS4270s on the bus, then you cannot specify which - socdev is matched with which CS4270. For now, we just reject - this I2C device if the socdev already has one attached. */ - if (codec->control_data) - return -ENODEV; - - /* Note: codec_dai->codec is NULL here */ - - codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL); - if (!codec->reg_cache) { - printk(KERN_ERR "cs4270: could not allocate register cache\n"); - ret = -ENOMEM; - goto error; - } + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = cs4270_codec; + int ret; - /* Verify that we have a CS4270 */ + /* Connect the codec to the socdev. snd_soc_new_pcms() needs this. */ + socdev->card->codec = codec; - ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); + /* Register PCMs */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to read I2C\n"); - goto error; - } - /* The top four bits of the chip ID should be 1100. */ - if ((ret & 0xF0) != 0xC0) { - /* The device at this address is not a CS4270 codec */ - ret = -ENODEV; - goto error; + dev_err(codec->dev, "failed to create pcms\n"); + return ret; } - printk(KERN_INFO "cs4270: found device at I2C address %X\n", - i2c_client->addr); - printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF); - - codec->control_data = i2c_client; - codec->read = cs4270_read_reg_cache; - codec->write = cs4270_i2c_write; - codec->reg_cache_size = CS4270_NUMREGS; - - /* The I2C interface is set up, so pre-fill our register cache */ - - ret = cs4270_fill_cache(codec); + /* Add the non-DAPM controls */ + ret = snd_soc_add_controls(codec, cs4270_snd_controls, + ARRAY_SIZE(cs4270_snd_controls)); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to fill register cache\n"); - goto error; + dev_err(codec->dev, "failed to add controls\n"); + goto error_free_pcms; } - /* Add the non-DAPM controls */ - - for (i = 0; i < ARRAY_SIZE(cs4270_snd_controls); i++) { - struct snd_kcontrol *kctrl = - snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL); - - ret = snd_ctl_add(codec->card, kctrl); - if (ret < 0) - goto error; + /* And finally, register the socdev */ + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card\n"); + goto error_free_pcms; } - i2c_set_clientdata(i2c_client, codec); - return 0; -error: - codec->control_data = NULL; - - kfree(codec->reg_cache); - codec->reg_cache = NULL; - codec->reg_cache_size = 0; +error_free_pcms: + snd_soc_free_pcms(socdev); return ret; } -#endif /* USE_I2C*/ +/** + * cs4270_remove - ASoC remove function + * @pdev: platform device + * + * This function is the counterpart to cs4270_probe(). + */ +static int cs4270_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); -struct snd_soc_dai cs4270_dai = { - .name = "CS4270", - .playback = { - .stream_name = "Playback", - .channels_min = 1, - .channels_max = 2, - .rates = 0, - .formats = CS4270_FORMATS, - }, - .capture = { - .stream_name = "Capture", - .channels_min = 1, - .channels_max = 2, - .rates = 0, - .formats = CS4270_FORMATS, - }, + snd_soc_free_pcms(socdev); + + return 0; }; -EXPORT_SYMBOL_GPL(cs4270_dai); -/* - * ASoC probe function +/** + * cs4270_i2c_probe - initialize the I2C interface of the CS4270 + * @i2c_client: the I2C client object + * @id: the I2C device ID (ignored) * - * This function is called when the machine driver calls - * platform_device_add(). + * This function is called whenever the I2C subsystem finds a device that + * matches the device ID given via a prior call to i2c_add_driver(). */ -static int cs4270_probe(struct platform_device *pdev) +static int cs4270_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec; - int ret = 0; + struct cs4270_private *cs4270; + unsigned int reg; + int ret; - printk(KERN_INFO "CS4270 ALSA SoC Codec\n"); + /* For now, we only support one cs4270 device in the system. See the + * comment for cs4270_codec. + */ + if (cs4270_codec) { + dev_err(&i2c_client->dev, "ignoring CS4270 at addr %X\n", + i2c_client->addr); + dev_err(&i2c_client->dev, "only one per board allowed\n"); + /* Should we return something other than ENODEV here? */ + return -ENODEV; + } + + /* Verify that we have a CS4270 */ + + ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); + if (ret < 0) { + dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n", + i2c_client->addr); + return ret; + } + /* The top four bits of the chip ID should be 1100. */ + if ((ret & 0xF0) != 0xC0) { + dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n", + i2c_client->addr); + return -ENODEV; + } + + dev_info(&i2c_client->dev, "found device at i2c address %X\n", + i2c_client->addr); + dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF); /* Allocate enough space for the snd_soc_codec structure and our private data together. */ - codec = kzalloc(ALIGN(sizeof(struct snd_soc_codec), 4) + - sizeof(struct cs4270_private), GFP_KERNEL); - if (!codec) { - printk(KERN_ERR "cs4270: Could not allocate codec structure\n"); + cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL); + if (!cs4270) { + dev_err(&i2c_client->dev, "could not allocate codec\n"); return -ENOMEM; } + codec = &cs4270->codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); + codec->dev = &i2c_client->dev; codec->name = "CS4270"; codec->owner = THIS_MODULE; codec->dai = &cs4270_dai; codec->num_dai = 1; - codec->private_data = (void *) codec + - ALIGN(sizeof(struct snd_soc_codec), 4); - - socdev->codec = codec; + codec->private_data = cs4270; + codec->control_data = i2c_client; + codec->read = cs4270_read_reg_cache; + codec->write = cs4270_i2c_write; + codec->reg_cache = cs4270->reg_cache; + codec->reg_cache_size = CS4270_NUMREGS; - /* Register PCMs */ + /* The I2C interface is set up, so pre-fill our register cache */ - ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + ret = cs4270_fill_cache(codec); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to create PCMs\n"); + dev_err(&i2c_client->dev, "failed to fill register cache\n"); goto error_free_codec; } -#ifdef USE_I2C - cs4270_socdev = socdev; + /* Disable auto-mute. This feature appears to be buggy. In some + * situations, auto-mute will not deactivate when it should, so we want + * this feature disabled by default. An application (e.g. alsactl) can + * re-enabled it by using the controls. + */ - ret = i2c_add_driver(&cs4270_i2c_driver); - if (ret) { - printk(KERN_ERR "cs4270: failed to attach driver"); - goto error_free_pcms; + reg = cs4270_read_reg_cache(codec, CS4270_MUTE); + reg &= ~CS4270_MUTE_AUTO; + ret = cs4270_i2c_write(codec, CS4270_MUTE, reg); + if (ret < 0) { + dev_err(&i2c_client->dev, "i2c write failed\n"); + return ret; } - /* Did we find a CS4270 on the I2C bus? */ - if (codec->control_data) { - /* Initialize codec ops */ - cs4270_dai.ops.hw_params = cs4270_hw_params; - cs4270_dai.ops.set_sysclk = cs4270_set_dai_sysclk; - cs4270_dai.ops.set_fmt = cs4270_set_dai_fmt; -#ifdef CONFIG_SND_SOC_CS4270_HWMUTE - cs4270_dai.ops.digital_mute = cs4270_mute; -#endif - } else - printk(KERN_INFO "cs4270: no I2C device found, " - "using stand-alone mode\n"); -#else - printk(KERN_INFO "cs4270: I2C disabled, using stand-alone mode\n"); -#endif + /* Disable automatic volume control. The hardware enables, and it + * causes volume change commands to be delayed, sometimes until after + * playback has started. An application (e.g. alsactl) can + * re-enabled it by using the controls. + */ - ret = snd_soc_init_card(socdev); + reg = cs4270_read_reg_cache(codec, CS4270_TRANS); + reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); + ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to register card\n"); - goto error_del_driver; + dev_err(&i2c_client->dev, "i2c write failed\n"); + return ret; } - return 0; + /* Initialize the DAI. Normally, we'd prefer to have a kmalloc'd DAI + * structure for each CS4270 device, but the machine driver needs to + * have a pointer to the DAI structure, so for now it must be a global + * variable. + */ + cs4270_dai.dev = &i2c_client->dev; -error_del_driver: -#ifdef USE_I2C - i2c_del_driver(&cs4270_i2c_driver); + /* Register the DAI. If all the other ASoC driver have already + * registered, then this will call our probe function, so + * cs4270_codec needs to be ready. + */ + cs4270_codec = codec; + ret = snd_soc_register_dai(&cs4270_dai); + if (ret < 0) { + dev_err(&i2c_client->dev, "failed to register DAIe\n"); + goto error_free_codec; + } -error_free_pcms: -#endif - snd_soc_free_pcms(socdev); + i2c_set_clientdata(i2c_client, cs4270); + + return 0; error_free_codec: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(cs4270); + cs4270_codec = NULL; + cs4270_dai.dev = NULL; return ret; } -static int cs4270_remove(struct platform_device *pdev) +/** + * cs4270_i2c_remove - remove an I2C device + * @i2c_client: the I2C client object + * + * This function is the counterpart to cs4270_i2c_probe(). + */ +static int cs4270_i2c_remove(struct i2c_client *i2c_client) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - - snd_soc_free_pcms(socdev); - -#ifdef USE_I2C - i2c_del_driver(&cs4270_i2c_driver); -#endif + struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client); - kfree(socdev->codec); - socdev->codec = NULL; + kfree(cs4270); + cs4270_codec = NULL; + cs4270_dai.dev = NULL; return 0; } /* + * cs4270_id - I2C device IDs supported by this driver + */ +static struct i2c_device_id cs4270_id[] = { + {"cs4270", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs4270_id); + +/* + * cs4270_i2c_driver - I2C device identification + * + * This structure tells the I2C subsystem how to identify and support a + * given I2C device type. + */ +static struct i2c_driver cs4270_i2c_driver = { + .driver = { + .name = "cs4270", + .owner = THIS_MODULE, + }, + .id_table = cs4270_id, + .probe = cs4270_i2c_probe, + .remove = cs4270_i2c_remove, +}; + +/* * ASoC codec device structure * * Assign this variable to the codec_dev field of the machine driver's @@ -776,13 +783,15 @@ EXPORT_SYMBOL_GPL(soc_codec_device_cs4270); static int __init cs4270_init(void) { - return snd_soc_register_dai(&cs4270_dai); + pr_info("Cirrus Logic CS4270 ALSA SoC Codec Driver\n"); + + return i2c_add_driver(&cs4270_i2c_driver); } module_init(cs4270_init); static void __exit cs4270_exit(void) { - snd_soc_unregister_dai(&cs4270_dai); + i2c_del_driver(&cs4270_i2c_driver); } module_exit(cs4270_exit); |
