summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/cs4270.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/cs4270.c')
-rw-r--r--sound/soc/codecs/cs4270.c105
1 files changed, 98 insertions, 7 deletions
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 7fa09a3..a32b822 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -18,7 +18,7 @@
* - The machine driver's 'startup' function must call
* cs4270_set_dai_sysclk() with the value of MCLK.
* - Only I2S and left-justified modes are supported
- * - Power management is not supported
+ * - Power management is supported
*/
#include <linux/module.h>
@@ -27,6 +27,7 @@
#include <sound/soc.h>
#include <sound/initval.h>
#include <linux/i2c.h>
+#include <linux/delay.h>
#include "cs4270.h"
@@ -56,6 +57,7 @@
#define CS4270_FIRSTREG 0x01
#define CS4270_LASTREG 0x08
#define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1)
+#define CS4270_I2C_INCR 0x80
/* Bit masks for the CS4270 registers */
#define CS4270_CHIPID_ID 0xF0
@@ -64,6 +66,8 @@
#define CS4270_PWRCTL_PDN_ADC 0x20
#define CS4270_PWRCTL_PDN_DAC 0x02
#define CS4270_PWRCTL_PDN 0x01
+#define CS4270_PWRCTL_PDN_ALL \
+ (CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN)
#define CS4270_MODE_SPEED_MASK 0x30
#define CS4270_MODE_1X 0x00
#define CS4270_MODE_2X 0x10
@@ -109,6 +113,7 @@ struct cs4270_private {
unsigned int mclk; /* Input frequency of the MCLK pin */
unsigned int mode; /* The mode (I2S or left-justified) */
unsigned int slave_mode;
+ unsigned int manual_mute;
};
/**
@@ -295,7 +300,7 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec)
s32 length;
length = i2c_smbus_read_i2c_block_data(i2c_client,
- CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache);
+ CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache);
if (length != CS4270_NUMREGS) {
dev_err(codec->dev, "i2c read failure, addr=0x%x\n",
@@ -453,7 +458,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
}
/**
- * cs4270_mute - enable/disable the CS4270 external mute
+ * cs4270_dai_mute - enable/disable the CS4270 external mute
* @dai: the SOC DAI
* @mute: 0 = disable mute, 1 = enable mute
*
@@ -462,21 +467,52 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
* board does not have the MUTEA or MUTEB pins connected to such circuitry,
* then this function will do nothing.
*/
-static int cs4270_mute(struct snd_soc_dai *dai, int mute)
+static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
+ struct cs4270_private *cs4270 = codec->private_data;
int reg6;
reg6 = snd_soc_read(codec, CS4270_MUTE);
if (mute)
reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
- else
+ else {
reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
+ reg6 |= cs4270->manual_mute;
+ }
return snd_soc_write(codec, CS4270_MUTE, reg6);
}
+/**
+ * cs4270_soc_put_mute - put callback for the 'Master Playback switch'
+ * alsa control.
+ * @kcontrol: mixer control
+ * @ucontrol: control element information
+ *
+ * This function basically passes the arguments on to the generic
+ * snd_soc_put_volsw() function and saves the mute information in
+ * our private data structure. This is because we want to prevent
+ * cs4270_dai_mute() neglecting the user's decision to manually
+ * mute the codec's output.
+ *
+ * Returns 0 for success.
+ */
+static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs4270_private *cs4270 = codec->private_data;
+ int left = !ucontrol->value.integer.value[0];
+ int right = !ucontrol->value.integer.value[1];
+
+ cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) |
+ (right ? CS4270_MUTE_DAC_B : 0);
+
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
/* A list of non-DAPM controls that the CS4270 supports */
static const struct snd_kcontrol_new cs4270_snd_controls[] = {
SOC_DOUBLE_R("Master Playback Volume",
@@ -486,7 +522,9 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
- SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0)
+ SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
+ SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1,
+ snd_soc_get_volsw, cs4270_soc_put_mute),
};
/*
@@ -506,7 +544,7 @@ static struct snd_soc_dai_ops cs4270_dai_ops = {
.hw_params = cs4270_hw_params,
.set_sysclk = cs4270_set_dai_sysclk,
.set_fmt = cs4270_set_dai_fmt,
- .digital_mute = cs4270_mute,
+ .digital_mute = cs4270_dai_mute,
};
struct snd_soc_dai cs4270_dai = {
@@ -753,6 +791,57 @@ static struct i2c_device_id cs4270_id[] = {
};
MODULE_DEVICE_TABLE(i2c, cs4270_id);
+#ifdef CONFIG_PM
+
+/* This suspend/resume implementation can handle both - a simple standby
+ * where the codec remains powered, and a full suspend, where the voltage
+ * domain the codec is connected to is teared down and/or any other hardware
+ * reset condition is asserted.
+ *
+ * The codec's own power saving features are enabled in the suspend callback,
+ * and all registers are written back to the hardware when resuming.
+ */
+
+static int cs4270_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+ struct snd_soc_codec *codec = &cs4270->codec;
+ int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+
+ return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+
+static int cs4270_i2c_resume(struct i2c_client *client)
+{
+ struct cs4270_private *cs4270 = i2c_get_clientdata(client);
+ struct snd_soc_codec *codec = &cs4270->codec;
+ int reg;
+
+ /* In case the device was put to hard reset during sleep, we need to
+ * wait 500ns here before any I2C communication. */
+ ndelay(500);
+
+ /* first restore the entire register cache ... */
+ for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
+ u8 val = snd_soc_read(codec, reg);
+
+ if (i2c_smbus_write_byte_data(client, reg, val)) {
+ dev_err(codec->dev, "i2c write failed\n");
+ return -EIO;
+ }
+ }
+
+ /* ... then disable the power-down bits */
+ reg = snd_soc_read(codec, CS4270_PWRCTL);
+ reg &= ~CS4270_PWRCTL_PDN_ALL;
+
+ return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+#else
+#define cs4270_i2c_suspend NULL
+#define cs4270_i2c_resume NULL
+#endif /* CONFIG_PM */
+
/*
* cs4270_i2c_driver - I2C device identification
*
@@ -767,6 +856,8 @@ static struct i2c_driver cs4270_i2c_driver = {
.id_table = cs4270_id,
.probe = cs4270_i2c_probe,
.remove = cs4270_i2c_remove,
+ .suspend = cs4270_i2c_suspend,
+ .resume = cs4270_i2c_resume,
};
/*
OpenPOWER on IntegriCloud