summaryrefslogtreecommitdiffstats
path: root/sound/pci/maestro3.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/maestro3.c')
-rw-r--r--sound/pci/maestro3.c21
1 files changed, 9 insertions, 12 deletions
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 2693b6f..99eb76c5 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -1492,7 +1492,7 @@ static int snd_m3_pcm_hw_params(snd_pcm_substream_t * substream,
/* set buffer address */
s->buffer_addr = substream->runtime->dma_addr;
if (s->buffer_addr & 0x3) {
- snd_printk("oh my, not aligned\n");
+ snd_printk(KERN_ERR "oh my, not aligned\n");
s->buffer_addr = s->buffer_addr & ~0x3;
}
return 0;
@@ -1942,7 +1942,7 @@ static int snd_m3_ac97_wait(m3_t *chip)
return 0;
} while (i-- > 0);
- snd_printk("ac97 serial bus busy\n");
+ snd_printk(KERN_ERR "ac97 serial bus busy\n");
return 1;
}
@@ -2046,8 +2046,7 @@ static void snd_m3_ac97_reset(m3_t *chip)
outw(0, io + GPIO_DATA);
outw(dir | GPO_PRIMARY_AC97, io + GPIO_DIRECTION);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((delay1 * HZ) / 1000);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(delay1));
outw(GPO_PRIMARY_AC97, io + GPIO_DATA);
udelay(5);
@@ -2055,8 +2054,7 @@ static void snd_m3_ac97_reset(m3_t *chip)
outw(IO_SRAM_ENABLE | SERIAL_AC_LINK_ENABLE, io + RING_BUS_CTRL_A);
outw(~0, io + GPIO_MASK);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((delay2 * HZ) / 1000);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(delay2));
if (! snd_m3_try_read_vendor(chip))
break;
@@ -2101,8 +2099,7 @@ static int __devinit snd_m3_mixer(m3_t *chip)
/* seems ac97 PCM needs initialization.. hack hack.. */
snd_ac97_write(chip->ac97, AC97_PCM, 0x8000 | (15 << 8) | 15);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HZ / 10);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(100));
snd_ac97_write(chip->ac97, AC97_PCM, 0);
memset(&id, 0, sizeof(id));
@@ -2367,7 +2364,7 @@ static int __devinit snd_m3_assp_client_init(m3_t *chip, m3_dma_t *s, int index)
address = 0x1100 + ((data_bytes/2) * index);
if ((address + (data_bytes/2)) >= 0x1c00) {
- snd_printk("no memory for %d bytes at ind %d (addr 0x%x)\n",
+ snd_printk(KERN_ERR "no memory for %d bytes at ind %d (addr 0x%x)\n",
data_bytes, index, address);
return -ENOMEM;
}
@@ -2476,6 +2473,7 @@ snd_m3_chip_init(m3_t *chip)
t |= ASSP_0_WS_ENABLE;
outb(t, chip->iobase + ASSP_CONTROL_A);
+ snd_m3_assp_init(chip); /* download DSP code before starting ASSP below */
outb(RUN_ASSP, chip->iobase + ASSP_CONTROL_B);
outb(0x00, io + HARDWARE_VOL_CTRL);
@@ -2655,7 +2653,7 @@ snd_m3_create(snd_card_t *card, struct pci_dev *pci,
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
- snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
@@ -2734,14 +2732,13 @@ snd_m3_create(snd_card_t *card, struct pci_dev *pci,
snd_m3_ac97_reset(chip);
- snd_m3_assp_init(chip);
snd_m3_amp_enable(chip, 1);
tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
if (request_irq(pci->irq, snd_m3_interrupt, SA_INTERRUPT|SA_SHIRQ,
card->driver, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
return -ENOMEM;
}
OpenPOWER on IntegriCloud