1 files changed, 467 insertions, 0 deletions

diff --git a/sound/pci/hda/alc_quirks.c b/sound/pci/hda/alc_quirks.c
new file mode 100644
index 0000000..2be1129
--- /dev/null
+++ b/sound/pci/hda/alc_quirks.c
@@ -0,0 +1,467 @@
+/*
+ * Common codes for Realtek codec quirks
+ * included by patch_realtek.c
+ */
+
+/*
+ * configuration template - to be copied to the spec instance
+ */
+struct alc_config_preset {
+	const struct snd_kcontrol_new *mixers[5]; /* should be identical size
+					     * with spec
+					     */
+	const struct snd_kcontrol_new *cap_mixer; /* capture mixer */
+	const struct hda_verb *init_verbs[5];
+	unsigned int num_dacs;
+	const hda_nid_t *dac_nids;
+	hda_nid_t dig_out_nid;		/* optional */
+	hda_nid_t hp_nid;		/* optional */
+	const hda_nid_t *slave_dig_outs;
+	unsigned int num_adc_nids;
+	const hda_nid_t *adc_nids;
+	const hda_nid_t *capsrc_nids;
+	hda_nid_t dig_in_nid;
+	unsigned int num_channel_mode;
+	const struct hda_channel_mode *channel_mode;
+	int need_dac_fix;
+	int const_channel_count;
+	unsigned int num_mux_defs;
+	const struct hda_input_mux *input_mux;
+	void (*unsol_event)(struct hda_codec *, unsigned int);
+	void (*setup)(struct hda_codec *);
+	void (*init_hook)(struct hda_codec *);
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	const struct hda_amp_list *loopbacks;
+	void (*power_hook)(struct hda_codec *codec);
+#endif
+};
+
+/*
+ * channel mode setting
+ */
+static int alc_ch_mode_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *uinfo)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	return snd_hda_ch_mode_info(codec, uinfo, spec->channel_mode,
+				    spec->num_channel_mode);
+}
+
+static int alc_ch_mode_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
+				   spec->num_channel_mode,
+				   spec->ext_channel_count);
+}
+
+static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
+				      spec->num_channel_mode,
+				      &spec->ext_channel_count);
+	if (err >= 0 && !spec->const_channel_count) {
+		spec->multiout.max_channels = spec->ext_channel_count;
+		if (spec->need_dac_fix)
+			spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+	}
+	return err;
+}
+
+/*
+ * Control the mode of pin widget settings via the mixer.  "pc" is used
+ * instead of "%" to avoid consequences of accidentally treating the % as
+ * being part of a format specifier.  Maximum allowed length of a value is
+ * 63 characters plus NULL terminator.
+ *
+ * Note: some retasking pin complexes seem to ignore requests for input
+ * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
+ * are requested.  Therefore order this list so that this behaviour will not
+ * cause problems when mixer clients move through the enum sequentially.
+ * NIDs 0x0f and 0x10 have been observed to have this behaviour as of
+ * March 2006.
+ */
+static const char * const alc_pin_mode_names[] = {
+	"Mic 50pc bias", "Mic 80pc bias",
+	"Line in", "Line out", "Headphone out",
+};
+static const unsigned char alc_pin_mode_values[] = {
+	PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
+};
+/* The control can present all 5 options, or it can limit the options based
+ * in the pin being assumed to be exclusively an input or an output pin.  In
+ * addition, "input" pins may or may not process the mic bias option
+ * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to
+ * accept requests for bias as of chip versions up to March 2006) and/or
+ * wiring in the computer.
+ */
+#define ALC_PIN_DIR_IN              0x00
+#define ALC_PIN_DIR_OUT             0x01
+#define ALC_PIN_DIR_INOUT           0x02
+#define ALC_PIN_DIR_IN_NOMICBIAS    0x03
+#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04
+
+/* Info about the pin modes supported by the different pin direction modes.
+ * For each direction the minimum and maximum values are given.
+ */
+static const signed char alc_pin_mode_dir_info[5][2] = {
+	{ 0, 2 },    /* ALC_PIN_DIR_IN */
+	{ 3, 4 },    /* ALC_PIN_DIR_OUT */
+	{ 0, 4 },    /* ALC_PIN_DIR_INOUT */
+	{ 2, 2 },    /* ALC_PIN_DIR_IN_NOMICBIAS */
+	{ 2, 4 },    /* ALC_PIN_DIR_INOUT_NOMICBIAS */
+};
+#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
+#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
+#define alc_pin_mode_n_items(_dir) \
+	(alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
+
+static int alc_pin_mode_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	unsigned int item_num = uinfo->value.enumerated.item;
+	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
+
+	if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
+		item_num = alc_pin_mode_min(dir);
+	strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
+	return 0;
+}
+
+static int alc_pin_mode_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	unsigned int i;
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+	long *valp = ucontrol->value.integer.value;
+	unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
+						 AC_VERB_GET_PIN_WIDGET_CONTROL,
+						 0x00);
+
+	/* Find enumerated value for current pinctl setting */
+	i = alc_pin_mode_min(dir);
+	while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
+		i++;
+	*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
+	return 0;
+}
+
+static int alc_pin_mode_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	signed int change;
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+	long val = *ucontrol->value.integer.value;
+	unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
+						 AC_VERB_GET_PIN_WIDGET_CONTROL,
+						 0x00);
+
+	if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
+		val = alc_pin_mode_min(dir);
+
+	change = pinctl != alc_pin_mode_values[val];
+	if (change) {
+		/* Set pin mode to that requested */
+		snd_hda_codec_write_cache(codec, nid, 0,
+					  AC_VERB_SET_PIN_WIDGET_CONTROL,
+					  alc_pin_mode_values[val]);
+
+		/* Also enable the retasking pin's input/output as required
+		 * for the requested pin mode.  Enum values of 2 or less are
+		 * input modes.
+		 *
+		 * Dynamically switching the input/output buffers probably
+		 * reduces noise slightly (particularly on input) so we'll
+		 * do it.  However, having both input and output buffers
+		 * enabled simultaneously doesn't seem to be problematic if
+		 * this turns out to be necessary in the future.
+		 */
+		if (val <= 2) {
+			snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
+						 HDA_AMP_MUTE, HDA_AMP_MUTE);
+			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
+						 HDA_AMP_MUTE, 0);
+		} else {
+			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
+						 HDA_AMP_MUTE, HDA_AMP_MUTE);
+			snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
+						 HDA_AMP_MUTE, 0);
+		}
+	}
+	return change;
+}
+
+#define ALC_PIN_MODE(xname, nid, dir) \
+	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
+	  .info = alc_pin_mode_info, \
+	  .get = alc_pin_mode_get, \
+	  .put = alc_pin_mode_put, \
+	  .private_value = nid | (dir<<16) }
+
+/* A switch control for ALC260 GPIO pins.  Multiple GPIOs can be ganged
+ * together using a mask with more than one bit set.  This control is
+ * currently used only by the ALC260 test model.  At this stage they are not
+ * needed for any "production" models.
+ */
+#ifdef CONFIG_SND_DEBUG
+#define alc_gpio_data_info	snd_ctl_boolean_mono_info
+
+static int alc_gpio_data_get(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+	long *valp = ucontrol->value.integer.value;
+	unsigned int val = snd_hda_codec_read(codec, nid, 0,
+					      AC_VERB_GET_GPIO_DATA, 0x00);
+
+	*valp = (val & mask) != 0;
+	return 0;
+}
+static int alc_gpio_data_put(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	signed int change;
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+	long val = *ucontrol->value.integer.value;
+	unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0,
+						    AC_VERB_GET_GPIO_DATA,
+						    0x00);
+
+	/* Set/unset the masked GPIO bit(s) as needed */
+	change = (val == 0 ? 0 : mask) != (gpio_data & mask);
+	if (val == 0)
+		gpio_data &= ~mask;
+	else
+		gpio_data |= mask;
+	snd_hda_codec_write_cache(codec, nid, 0,
+				  AC_VERB_SET_GPIO_DATA, gpio_data);
+
+	return change;
+}
+#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
+	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
+	  .info = alc_gpio_data_info, \
+	  .get = alc_gpio_data_get, \
+	  .put = alc_gpio_data_put, \
+	  .private_value = nid | (mask<<16) }
+#endif   /* CONFIG_SND_DEBUG */
+
+/* A switch control to allow the enabling of the digital IO pins on the
+ * ALC260.  This is incredibly simplistic; the intention of this control is
+ * to provide something in the test model allowing digital outputs to be
+ * identified if present.  If models are found which can utilise these
+ * outputs a more complete mixer control can be devised for those models if
+ * necessary.
+ */
+#ifdef CONFIG_SND_DEBUG
+#define alc_spdif_ctrl_info	snd_ctl_boolean_mono_info
+
+static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+	long *valp = ucontrol->value.integer.value;
+	unsigned int val = snd_hda_codec_read(codec, nid, 0,
+					      AC_VERB_GET_DIGI_CONVERT_1, 0x00);
+
+	*valp = (val & mask) != 0;
+	return 0;
+}
+static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	signed int change;
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+	long val = *ucontrol->value.integer.value;
+	unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
+						    AC_VERB_GET_DIGI_CONVERT_1,
+						    0x00);
+
+	/* Set/unset the masked control bit(s) as needed */
+	change = (val == 0 ? 0 : mask) != (ctrl_data & mask);
+	if (val==0)
+		ctrl_data &= ~mask;
+	else
+		ctrl_data |= mask;
+	snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+				  ctrl_data);
+
+	return change;
+}
+#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
+	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
+	  .info = alc_spdif_ctrl_info, \
+	  .get = alc_spdif_ctrl_get, \
+	  .put = alc_spdif_ctrl_put, \
+	  .private_value = nid | (mask<<16) }
+#endif   /* CONFIG_SND_DEBUG */
+
+/* A switch control to allow the enabling EAPD digital outputs on the ALC26x.
+ * Again, this is only used in the ALC26x test models to help identify when
+ * the EAPD line must be asserted for features to work.
+ */
+#ifdef CONFIG_SND_DEBUG
+#define alc_eapd_ctrl_info	snd_ctl_boolean_mono_info
+
+static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+	long *valp = ucontrol->value.integer.value;
+	unsigned int val = snd_hda_codec_read(codec, nid, 0,
+					      AC_VERB_GET_EAPD_BTLENABLE, 0x00);
+
+	*valp = (val & mask) != 0;
+	return 0;
+}
+
+static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	int change;
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	hda_nid_t nid = kcontrol->private_value & 0xffff;
+	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
+	long val = *ucontrol->value.integer.value;
+	unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
+						    AC_VERB_GET_EAPD_BTLENABLE,
+						    0x00);
+
+	/* Set/unset the masked control bit(s) as needed */
+	change = (!val ? 0 : mask) != (ctrl_data & mask);
+	if (!val)
+		ctrl_data &= ~mask;
+	else
+		ctrl_data |= mask;
+	snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
+				  ctrl_data);
+
+	return change;
+}
+
+#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \
+	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
+	  .info = alc_eapd_ctrl_info, \
+	  .get = alc_eapd_ctrl_get, \
+	  .put = alc_eapd_ctrl_put, \
+	  .private_value = nid | (mask<<16) }
+#endif   /* CONFIG_SND_DEBUG */
+
+static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+
+	if (!cfg->line_outs) {
+		while (cfg->line_outs < AUTO_CFG_MAX_OUTS &&
+		       cfg->line_out_pins[cfg->line_outs])
+			cfg->line_outs++;
+	}
+	if (!cfg->speaker_outs) {
+		while (cfg->speaker_outs < AUTO_CFG_MAX_OUTS &&
+		       cfg->speaker_pins[cfg->speaker_outs])
+			cfg->speaker_outs++;
+	}
+	if (!cfg->hp_outs) {
+		while (cfg->hp_outs < AUTO_CFG_MAX_OUTS &&
+		       cfg->hp_pins[cfg->hp_outs])
+			cfg->hp_outs++;
+	}
+}
+
+/*
+ * set up from the preset table
+ */
+static void setup_preset(struct hda_codec *codec,
+			 const struct alc_config_preset *preset)
+{
+	struct alc_spec *spec = codec->spec;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
+		add_mixer(spec, preset->mixers[i]);
+	spec->cap_mixer = preset->cap_mixer;
+	for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i];
+	     i++)
+		add_verb(spec, preset->init_verbs[i]);
+
+	spec->channel_mode = preset->channel_mode;
+	spec->num_channel_mode = preset->num_channel_mode;
+	spec->need_dac_fix = preset->need_dac_fix;
+	spec->const_channel_count = preset->const_channel_count;
+
+	if (preset->const_channel_count)
+		spec->multiout.max_channels = preset->const_channel_count;
+	else
+		spec->multiout.max_channels = spec->channel_mode[0].channels;
+	spec->ext_channel_count = spec->channel_mode[0].channels;
+
+	spec->multiout.num_dacs = preset->num_dacs;
+	spec->multiout.dac_nids = preset->dac_nids;
+	spec->multiout.dig_out_nid = preset->dig_out_nid;
+	spec->multiout.slave_dig_outs = preset->slave_dig_outs;
+	spec->multiout.hp_nid = preset->hp_nid;
+
+	spec->num_mux_defs = preset->num_mux_defs;
+	if (!spec->num_mux_defs)
+		spec->num_mux_defs = 1;
+	spec->input_mux = preset->input_mux;
+
+	spec->num_adc_nids = preset->num_adc_nids;
+	spec->adc_nids = preset->adc_nids;
+	spec->capsrc_nids = preset->capsrc_nids;
+	spec->dig_in_nid = preset->dig_in_nid;
+
+	spec->unsol_event = preset->unsol_event;
+	spec->init_hook = preset->init_hook;
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	spec->power_hook = preset->power_hook;
+	spec->loopback.amplist = preset->loopbacks;
+#endif
+
+	if (preset->setup)
+		preset->setup(codec);
+
+	alc_fixup_autocfg_pin_nums(codec);
+}
+
+
+/* auto-toggle front mic */
+static void alc88x_simple_mic_automute(struct hda_codec *codec)
+{
+ 	unsigned int present;
+	unsigned char bits;
+
+	present = snd_hda_jack_detect(codec, 0x18);
+	bits = present ? HDA_AMP_MUTE : 0;
+	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
+}
+