summaryrefslogtreecommitdiffstats
path: root/sound/pci/ctxfi/cthw20k2.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/ctxfi/cthw20k2.c')
-rw-r--r--sound/pci/ctxfi/cthw20k2.c337
1 files changed, 240 insertions, 97 deletions
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index 5364164..d6c54b5 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -8,7 +8,7 @@
* @File cthw20k2.c
*
* @Brief
- * This file contains the implementation of hardware access methord for 20k2.
+ * This file contains the implementation of hardware access method for 20k2.
*
* @Author Liu Chun
* @Date May 14 2008
@@ -38,6 +38,8 @@ struct hw20k2 {
unsigned char dev_id;
unsigned char addr_size;
unsigned char data_size;
+
+ int mic_source;
};
static u32 hw_read_20kx(struct hw *hw, u32 reg);
@@ -1163,7 +1165,12 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x01010101);
hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
} else if (2 == info->msr) {
- hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11111111);
+ if (hw->model != CTSB1270) {
+ hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11111111);
+ } else {
+ /* PCM4220 on Titanium HD is different. */
+ hw_write_20kx(hw, AUDIO_IO_MCLK, 0x11011111);
+ }
/* Specify all playing 96khz
* EA [0] - Enabled
* RTA [4:5] - 96kHz
@@ -1175,6 +1182,10 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
* RTD [28:29] - 96kHz */
hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x11111111);
hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
+ } else if ((4 == info->msr) && (hw->model == CTSB1270)) {
+ hw_write_20kx(hw, AUDIO_IO_MCLK, 0x21011111);
+ hw_write_20kx(hw, AUDIO_IO_TX_BLRCLK, 0x21212121);
+ hw_write_20kx(hw, AUDIO_IO_RX_BLRCLK, 0);
} else {
printk(KERN_ALERT "ctxfi: ERROR!!! Invalid sampling rate!!!\n");
return -EINVAL;
@@ -1182,6 +1193,8 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
for (i = 0; i < 8; i++) {
if (i <= 3) {
+ /* This comment looks wrong since loop is over 4 */
+ /* channels and emu20k2 supports 4 spdif IOs. */
/* 1st 3 channels are SPDIFs (SB0960) */
if (i == 3)
data = 0x1001001;
@@ -1206,12 +1219,16 @@ static int hw_daio_init(struct hw *hw, const struct daio_conf *info)
hw_write_20kx(hw, AUDIO_IO_TX_CSTAT_H+(0x40*i), 0x0B);
} else {
+ /* Again, loop is over 4 channels not 5. */
/* Next 5 channels are I2S (SB0960) */
data = 0x11;
hw_write_20kx(hw, AUDIO_IO_RX_CTL+(0x40*i), data);
if (2 == info->msr) {
/* Four channels per sample period */
data |= 0x1000;
+ } else if (4 == info->msr) {
+ /* FIXME: check this against the chip spec */
+ data |= 0x2000;
}
hw_write_20kx(hw, AUDIO_IO_TX_CTL+(0x40*i), data);
}
@@ -1299,21 +1316,18 @@ static int hw_pll_init(struct hw *hw, unsigned int rsr)
pllenb = 0xB;
hw_write_20kx(hw, PLL_ENB, pllenb);
- pllctl = 0x20D00000;
- set_field(&pllctl, PLLCTL_FD, 16 - 4);
+ pllctl = 0x20C00000;
+ set_field(&pllctl, PLLCTL_B, 0);
+ set_field(&pllctl, PLLCTL_FD, 48000 == rsr ? 16 - 4 : 147 - 4);
+ set_field(&pllctl, PLLCTL_RD, 48000 == rsr ? 1 - 1 : 10 - 1);
hw_write_20kx(hw, PLL_CTL, pllctl);
mdelay(40);
+
pllctl = hw_read_20kx(hw, PLL_CTL);
- set_field(&pllctl, PLLCTL_B, 0);
- if (48000 == rsr) {
- set_field(&pllctl, PLLCTL_FD, 16 - 2);
- set_field(&pllctl, PLLCTL_RD, 1 - 1); /* 3000*16/1 = 48000 */
- } else { /* 44100 */
- set_field(&pllctl, PLLCTL_FD, 147 - 2);
- set_field(&pllctl, PLLCTL_RD, 10 - 1); /* 3000*147/10 = 44100 */
- }
+ set_field(&pllctl, PLLCTL_FD, 48000 == rsr ? 16 - 2 : 147 - 2);
hw_write_20kx(hw, PLL_CTL, pllctl);
mdelay(40);
+
for (i = 0; i < 1000; i++) {
pllstat = hw_read_20kx(hw, PLL_STAT);
if (get_field(pllstat, PLLSTAT_PD))
@@ -1557,7 +1571,7 @@ static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data)
hw_write_20kx(hw, I2C_IF_STATUS, i2c_status);
hw20k2_i2c_wait_data_ready(hw);
- /* Dummy write to trigger the write oprtation */
+ /* Dummy write to trigger the write operation */
hw_write_20kx(hw, I2C_IF_WDATA, 0);
hw20k2_i2c_wait_data_ready(hw);
@@ -1568,6 +1582,30 @@ static int hw20k2_i2c_write(struct hw *hw, u16 addr, u32 data)
return 0;
}
+static void hw_dac_stop(struct hw *hw)
+{
+ u32 data;
+ data = hw_read_20kx(hw, GPIO_DATA);
+ data &= 0xFFFFFFFD;
+ hw_write_20kx(hw, GPIO_DATA, data);
+ mdelay(10);
+}
+
+static void hw_dac_start(struct hw *hw)
+{
+ u32 data;
+ data = hw_read_20kx(hw, GPIO_DATA);
+ data |= 0x2;
+ hw_write_20kx(hw, GPIO_DATA, data);
+ mdelay(50);
+}
+
+static void hw_dac_reset(struct hw *hw)
+{
+ hw_dac_stop(hw);
+ hw_dac_start(hw);
+}
+
static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
{
int err;
@@ -1594,6 +1632,21 @@ static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
0x00000000 /* Vol Control B4 */
};
+ if (hw->model == CTSB1270) {
+ hw_dac_stop(hw);
+ data = hw_read_20kx(hw, GPIO_DATA);
+ data &= ~0x0600;
+ if (1 == info->msr)
+ data |= 0x0000; /* Single Speed Mode 0-50kHz */
+ else if (2 == info->msr)
+ data |= 0x0200; /* Double Speed Mode 50-100kHz */
+ else
+ data |= 0x0600; /* Quad Speed Mode 100-200kHz */
+ hw_write_20kx(hw, GPIO_DATA, data);
+ hw_dac_start(hw);
+ return 0;
+ }
+
/* Set DAC reset bit as output */
data = hw_read_20kx(hw, GPIO_CTRL);
data |= 0x02;
@@ -1606,22 +1659,8 @@ static int hw_dac_init(struct hw *hw, const struct dac_conf *info)
for (i = 0; i < 2; i++) {
/* Reset DAC twice just in-case the chip
* didn't initialized properly */
- data = hw_read_20kx(hw, GPIO_DATA);
- /* GPIO data bit 1 */
- data &= 0xFFFFFFFD;
- hw_write_20kx(hw, GPIO_DATA, data);
- mdelay(10);
- data |= 0x2;
- hw_write_20kx(hw, GPIO_DATA, data);
- mdelay(50);
-
- /* Reset the 2nd time */
- data &= 0xFFFFFFFD;
- hw_write_20kx(hw, GPIO_DATA, data);
- mdelay(10);
- data |= 0x2;
- hw_write_20kx(hw, GPIO_DATA, data);
- mdelay(50);
+ hw_dac_reset(hw);
+ hw_dac_reset(hw);
if (hw20k2_i2c_read(hw, CS4382_MC1, &cs_read.mode_control_1))
continue;
@@ -1725,7 +1764,11 @@ End:
static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
{
u32 data;
-
+ if (hw->model == CTSB1270) {
+ /* Titanium HD has two ADC chips, one for line in and one */
+ /* for MIC. We don't need to switch the ADC input. */
+ return 1;
+ }
data = hw_read_20kx(hw, GPIO_DATA);
switch (type) {
case ADC_MICIN:
@@ -1742,35 +1785,47 @@ static int hw_is_adc_input_selected(struct hw *hw, enum ADCSRC type)
#define MIC_BOOST_0DB 0xCF
#define MIC_BOOST_STEPS_PER_DB 2
-#define MIC_BOOST_20DB (MIC_BOOST_0DB + 20 * MIC_BOOST_STEPS_PER_DB)
+
+static void hw_wm8775_input_select(struct hw *hw, u8 input, s8 gain_in_db)
+{
+ u32 adcmc, gain;
+
+ if (input > 3)
+ input = 3;
+
+ adcmc = ((u32)1 << input) | 0x100; /* Link L+R gain... */
+
+ hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, adcmc),
+ MAKE_WM8775_DATA(adcmc));
+
+ if (gain_in_db < -103)
+ gain_in_db = -103;
+ if (gain_in_db > 24)
+ gain_in_db = 24;
+
+ gain = gain_in_db * MIC_BOOST_STEPS_PER_DB + MIC_BOOST_0DB;
+
+ hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, gain),
+ MAKE_WM8775_DATA(gain));
+ /* ...so there should be no need for the following. */
+ hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, gain),
+ MAKE_WM8775_DATA(gain));
+}
static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
{
u32 data;
-
data = hw_read_20kx(hw, GPIO_DATA);
switch (type) {
case ADC_MICIN:
data |= (0x1 << 14);
hw_write_20kx(hw, GPIO_DATA, data);
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
- MAKE_WM8775_DATA(0x101)); /* Mic-in */
- hw20k2_i2c_write(hw,
- MAKE_WM8775_ADDR(WM8775_AADCL, MIC_BOOST_20DB),
- MAKE_WM8775_DATA(MIC_BOOST_20DB)); /* +20dB */
- hw20k2_i2c_write(hw,
- MAKE_WM8775_ADDR(WM8775_AADCR, MIC_BOOST_20DB),
- MAKE_WM8775_DATA(MIC_BOOST_20DB)); /* +20dB */
+ hw_wm8775_input_select(hw, 0, 20); /* Mic, 20dB */
break;
case ADC_LINEIN:
data &= ~(0x1 << 14);
hw_write_20kx(hw, GPIO_DATA, data);
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
- MAKE_WM8775_DATA(0x102)); /* Line-in */
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
- MAKE_WM8775_DATA(0xCF)); /* No boost */
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
- MAKE_WM8775_DATA(0xCF)); /* No boost */
+ hw_wm8775_input_select(hw, 1, 0); /* Line-in, 0dB */
break;
default:
break;
@@ -1782,7 +1837,7 @@ static int hw_adc_input_select(struct hw *hw, enum ADCSRC type)
static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
{
int err;
- u32 mux = 2, data, ctl;
+ u32 data, ctl;
/* Set ADC reset bit as output */
data = hw_read_20kx(hw, GPIO_CTRL);
@@ -1796,19 +1851,42 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
goto error;
}
- /* Make ADC in normal operation */
+ /* Reset the ADC (reset is active low). */
data = hw_read_20kx(hw, GPIO_DATA);
data &= ~(0x1 << 15);
+ hw_write_20kx(hw, GPIO_DATA, data);
+
+ if (hw->model == CTSB1270) {
+ /* Set up the PCM4220 ADC on Titanium HD */
+ data &= ~0x0C;
+ if (1 == info->msr)
+ data |= 0x00; /* Single Speed Mode 32-50kHz */
+ else if (2 == info->msr)
+ data |= 0x08; /* Double Speed Mode 50-108kHz */
+ else
+ data |= 0x04; /* Quad Speed Mode 108kHz-216kHz */
+ hw_write_20kx(hw, GPIO_DATA, data);
+ }
+
mdelay(10);
+ /* Return the ADC to normal operation. */
data |= (0x1 << 15);
hw_write_20kx(hw, GPIO_DATA, data);
mdelay(50);
+ /* I2C write to register offset 0x0B to set ADC LRCLK polarity */
+ /* invert bit, interface format to I2S, word length to 24-bit, */
+ /* enable ADC high pass filter. Fixes bug 5323? */
+ hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_IC, 0x26),
+ MAKE_WM8775_DATA(0x26));
+
/* Set the master mode (256fs) */
if (1 == info->msr) {
+ /* slave mode, 128x oversampling 256fs */
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x02),
MAKE_WM8775_DATA(0x02));
- } else if (2 == info->msr) {
+ } else if ((2 == info->msr) || (4 == info->msr)) {
+ /* slave mode, 64x oversampling, 256fs */
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
MAKE_WM8775_DATA(0x0A));
} else {
@@ -1818,55 +1896,113 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
goto error;
}
- /* Configure GPIO bit 14 change to line-in/mic-in */
- ctl = hw_read_20kx(hw, GPIO_CTRL);
- ctl |= 0x1 << 14;
- hw_write_20kx(hw, GPIO_CTRL, ctl);
-
- /* Check using Mic-in or Line-in */
- data = hw_read_20kx(hw, GPIO_DATA);
-
- if (mux == 1) {
- /* Configures GPIO data to select Mic-in */
- data |= 0x1 << 14;
- hw_write_20kx(hw, GPIO_DATA, data);
-
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x101),
- MAKE_WM8775_DATA(0x101)); /* Mic-in */
- hw20k2_i2c_write(hw,
- MAKE_WM8775_ADDR(WM8775_AADCL, MIC_BOOST_20DB),
- MAKE_WM8775_DATA(MIC_BOOST_20DB)); /* +20dB */
- hw20k2_i2c_write(hw,
- MAKE_WM8775_ADDR(WM8775_AADCR, MIC_BOOST_20DB),
- MAKE_WM8775_DATA(MIC_BOOST_20DB)); /* +20dB */
- } else if (mux == 2) {
- /* Configures GPIO data to select Line-in */
- data &= ~(0x1 << 14);
- hw_write_20kx(hw, GPIO_DATA, data);
-
- /* Setup ADC */
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_ADCMC, 0x102),
- MAKE_WM8775_DATA(0x102)); /* Line-in */
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCL, 0xCF),
- MAKE_WM8775_DATA(0xCF)); /* No boost */
- hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_AADCR, 0xCF),
- MAKE_WM8775_DATA(0xCF)); /* No boost */
+ if (hw->model != CTSB1270) {
+ /* Configure GPIO bit 14 change to line-in/mic-in */
+ ctl = hw_read_20kx(hw, GPIO_CTRL);
+ ctl |= 0x1 << 14;
+ hw_write_20kx(hw, GPIO_CTRL, ctl);
+ hw_adc_input_select(hw, ADC_LINEIN);
} else {
- printk(KERN_ALERT "ctxfi: ERROR!!! Invalid input mux!!!\n");
- err = -EINVAL;
- goto error;
+ hw_wm8775_input_select(hw, 0, 0);
}
return 0;
-
error:
hw20k2_i2c_uninit(hw);
return err;
}
-static int hw_have_digit_io_switch(struct hw *hw)
+static struct capabilities hw_capabilities(struct hw *hw)
{
- return 0;
+ struct capabilities cap;
+
+ cap.digit_io_switch = 0;
+ cap.dedicated_mic = hw->model == CTSB1270;
+ cap.output_switch = hw->model == CTSB1270;
+ cap.mic_source_switch = hw->model == CTSB1270;
+
+ return cap;
+}
+
+static int hw_output_switch_get(struct hw *hw)
+{
+ u32 data = hw_read_20kx(hw, GPIO_EXT_DATA);
+
+ switch (data & 0x30) {
+ case 0x00:
+ return 0;
+ case 0x10:
+ return 1;
+ case 0x20:
+ return 2;
+ default:
+ return 3;
+ }
+}
+
+static int hw_output_switch_put(struct hw *hw, int position)
+{
+ u32 data;
+
+ if (position == hw_output_switch_get(hw))
+ return 0;
+
+ /* Mute line and headphones (intended for anti-pop). */
+ data = hw_read_20kx(hw, GPIO_DATA);
+ data |= (0x03 << 11);
+ hw_write_20kx(hw, GPIO_DATA, data);
+
+ data = hw_read_20kx(hw, GPIO_EXT_DATA) & ~0x30;
+ switch (position) {
+ case 0:
+ break;
+ case 1:
+ data |= 0x10;
+ break;
+ default:
+ data |= 0x20;
+ }
+ hw_write_20kx(hw, GPIO_EXT_DATA, data);
+
+ /* Unmute line and headphones. */
+ data = hw_read_20kx(hw, GPIO_DATA);
+ data &= ~(0x03 << 11);
+ hw_write_20kx(hw, GPIO_DATA, data);
+
+ return 1;
+}
+
+static int hw_mic_source_switch_get(struct hw *hw)
+{
+ struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+
+ return hw20k2->mic_source;
+}
+
+static int hw_mic_source_switch_put(struct hw *hw, int position)
+{
+ struct hw20k2 *hw20k2 = (struct hw20k2 *)hw;
+
+ if (position == hw20k2->mic_source)
+ return 0;
+
+ switch (position) {
+ case 0:
+ hw_wm8775_input_select(hw, 0, 0); /* Mic, 0dB */
+ break;
+ case 1:
+ hw_wm8775_input_select(hw, 1, 0); /* FP Mic, 0dB */
+ break;
+ case 2:
+ hw_wm8775_input_select(hw, 3, 0); /* Aux Ext, 0dB */
+ break;
+ default:
+ return 0;
+ }
+
+ hw20k2->mic_source = position;
+
+ return 1;
}
static irqreturn_t ct_20k2_interrupt(int irq, void *dev_id)
@@ -1925,7 +2061,7 @@ static int hw_card_start(struct hw *hw)
if (hw->irq < 0) {
err = request_irq(pci->irq, ct_20k2_interrupt, IRQF_SHARED,
- "ctxfi", hw);
+ KBUILD_MODNAME, hw);
if (err < 0) {
printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
goto error2;
@@ -2023,13 +2159,16 @@ static int hw_card_init(struct hw *hw, struct card_conf *info)
/* Reset all SRC pending interrupts */
hw_write_20kx(hw, SRC_IP, 0);
- /* TODO: detect the card ID and configure GPIO accordingly. */
- /* Configures GPIO (0xD802 0x98028) */
- /*hw_write_20kx(hw, GPIO_CTRL, 0x7F07);*/
- /* Configures GPIO (SB0880) */
- /*hw_write_20kx(hw, GPIO_CTRL, 0xFF07);*/
- hw_write_20kx(hw, GPIO_CTRL, 0xD802);
-
+ if (hw->model != CTSB1270) {
+ /* TODO: detect the card ID and configure GPIO accordingly. */
+ /* Configures GPIO (0xD802 0x98028) */
+ /*hw_write_20kx(hw, GPIO_CTRL, 0x7F07);*/
+ /* Configures GPIO (SB0880) */
+ /*hw_write_20kx(hw, GPIO_CTRL, 0xFF07);*/
+ hw_write_20kx(hw, GPIO_CTRL, 0xD802);
+ } else {
+ hw_write_20kx(hw, GPIO_CTRL, 0x9E5F);
+ }
/* Enable audio ring */
hw_write_20kx(hw, MIXER_AR_ENABLE, 0x01);
@@ -2106,7 +2245,11 @@ static struct hw ct20k2_preset __devinitdata = {
.pll_init = hw_pll_init,
.is_adc_source_selected = hw_is_adc_input_selected,
.select_adc_source = hw_adc_input_select,
- .have_digit_io_switch = hw_have_digit_io_switch,
+ .capabilities = hw_capabilities,
+ .output_switch_get = hw_output_switch_get,
+ .output_switch_put = hw_output_switch_put,
+ .mic_source_switch_get = hw_mic_source_switch_get,
+ .mic_source_switch_put = hw_mic_source_switch_put,
#ifdef CONFIG_PM
.suspend = hw_suspend,
.resume = hw_resume,
OpenPOWER on IntegriCloud