diff options
Diffstat (limited to 'sound/pci/azt3328.c')
| -rw-r--r-- | sound/pci/azt3328.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index dc638f39..8260079 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -669,7 +669,7 @@ static void snd_azf3328_setfmt(azf3328_t *chip, case 48000: val |= 0x06; break; case 64000: val |= 0x07; break; default: - snd_printk("unknown bitrate %d, assuming 44.1kHz!\n", bitrate); + snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate); val |= 0x05; /* 44100 */ break; } @@ -854,10 +854,10 @@ static int snd_azf3328_playback_trigger(snd_pcm_substream_t * substream, int cmd chip->is_playing = 0; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); + snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); + snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); break; default: return -EINVAL; @@ -935,10 +935,10 @@ static int snd_azf3328_capture_trigger(snd_pcm_substream_t * substream, int cmd) chip->is_playing = 0; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); + snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n"); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); + snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n"); break; default: return -EINVAL; @@ -1356,7 +1356,7 @@ static int __devinit snd_azf3328_create(snd_card_t * card, /* check if we can restrict PCI DMA transfers to 24 bits */ if (pci_set_dma_mask(pci, 0x00ffffff) < 0 || pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) { - snd_printk("architecture does not support 24bit PCI busmaster DMA\n"); + snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; } @@ -1374,7 +1374,7 @@ static int __devinit snd_azf3328_create(snd_card_t * card, chip->mixer_port = pci_resource_start(pci, 4); if (request_irq(pci->irq, snd_azf3328_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) { - snd_printk("unable to grab IRQ %d\n", pci->irq); + snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq); snd_azf3328_free(chip); return -EBUSY; } @@ -1450,7 +1450,7 @@ static int __devinit snd_azf3328_probe(struct pci_dev *pci, if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401, chip->mpu_port, 1, pci->irq, 0, &chip->rmidi)) < 0) { - snd_printk("azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port); + snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port); snd_card_free(card); return err; } @@ -1462,7 +1462,7 @@ static int __devinit snd_azf3328_probe(struct pci_dev *pci, if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2, OPL3_HW_AUTO, 1, &opl3) < 0) { - snd_printk("azf3328: no OPL3 device at 0x%lx-0x%lx?\n", + snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n", chip->synth_port, chip->synth_port+2 ); } else { if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { |
