summaryrefslogtreecommitdiffstats
path: root/sound/mips/hal2.h
diff options
context:
space:
mode:
Diffstat (limited to 'sound/mips/hal2.h')
-rw-r--r--sound/mips/hal2.h245
1 files changed, 245 insertions, 0 deletions
diff --git a/sound/mips/hal2.h b/sound/mips/hal2.h
new file mode 100644
index 0000000..f19828b
--- /dev/null
+++ b/sound/mips/hal2.h
@@ -0,0 +1,245 @@
+#ifndef __HAL2_H
+#define __HAL2_H
+
+/*
+ * Driver for HAL2 sound processors
+ * Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se>
+ * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/types.h>
+
+/* Indirect status register */
+
+#define H2_ISR_TSTATUS 0x01 /* RO: transaction status 1=busy */
+#define H2_ISR_USTATUS 0x02 /* RO: utime status bit 1=armed */
+#define H2_ISR_QUAD_MODE 0x04 /* codec mode 0=indigo 1=quad */
+#define H2_ISR_GLOBAL_RESET_N 0x08 /* chip global reset 0=reset */
+#define H2_ISR_CODEC_RESET_N 0x10 /* codec/synth reset 0=reset */
+
+/* Revision register */
+
+#define H2_REV_AUDIO_PRESENT 0x8000 /* RO: audio present 0=present */
+#define H2_REV_BOARD_M 0x7000 /* RO: bits 14:12, board revision */
+#define H2_REV_MAJOR_CHIP_M 0x00F0 /* RO: bits 7:4, major chip revision */
+#define H2_REV_MINOR_CHIP_M 0x000F /* RO: bits 3:0, minor chip revision */
+
+/* Indirect address register */
+
+/*
+ * Address of indirect internal register to be accessed. A write to this
+ * register initiates read or write access to the indirect registers in the
+ * HAL2. Note that there af four indirect data registers for write access to
+ * registers larger than 16 byte.
+ */
+
+#define H2_IAR_TYPE_M 0xF000 /* bits 15:12, type of functional */
+ /* block the register resides in */
+ /* 1=DMA Port */
+ /* 9=Global DMA Control */
+ /* 2=Bresenham */
+ /* 3=Unix Timer */
+#define H2_IAR_NUM_M 0x0F00 /* bits 11:8 instance of the */
+ /* blockin which the indirect */
+ /* register resides */
+ /* If IAR_TYPE_M=DMA Port: */
+ /* 1=Synth In */
+ /* 2=AES In */
+ /* 3=AES Out */
+ /* 4=DAC Out */
+ /* 5=ADC Out */
+ /* 6=Synth Control */
+ /* If IAR_TYPE_M=Global DMA Control: */
+ /* 1=Control */
+ /* If IAR_TYPE_M=Bresenham: */
+ /* 1=Bresenham Clock Gen 1 */
+ /* 2=Bresenham Clock Gen 2 */
+ /* 3=Bresenham Clock Gen 3 */
+ /* If IAR_TYPE_M=Unix Timer: */
+ /* 1=Unix Timer */
+#define H2_IAR_ACCESS_SELECT 0x0080 /* 1=read 0=write */
+#define H2_IAR_PARAM 0x000C /* Parameter Select */
+#define H2_IAR_RB_INDEX_M 0x0003 /* Read Back Index */
+ /* 00:word0 */
+ /* 01:word1 */
+ /* 10:word2 */
+ /* 11:word3 */
+/*
+ * HAL2 internal addressing
+ *
+ * The HAL2 has "indirect registers" (idr) which are accessed by writing to the
+ * Indirect Data registers. Write the address to the Indirect Address register
+ * to transfer the data.
+ *
+ * We define the H2IR_* to the read address and H2IW_* to the write address and
+ * H2I_* to be fields in whatever register is referred to.
+ *
+ * When we write to indirect registers which are larger than one word (16 bit)
+ * we have to fill more than one indirect register before writing. When we read
+ * back however we have to read several times, each time with different Read
+ * Back Indexes (there are defs for doing this easily).
+ */
+
+/*
+ * Relay Control
+ */
+#define H2I_RELAY_C 0x9100
+#define H2I_RELAY_C_STATE 0x01 /* state of RELAY pin signal */
+
+/* DMA port enable */
+
+#define H2I_DMA_PORT_EN 0x9104
+#define H2I_DMA_PORT_EN_SY_IN 0x01 /* Synth_in DMA port */
+#define H2I_DMA_PORT_EN_AESRX 0x02 /* AES receiver DMA port */
+#define H2I_DMA_PORT_EN_AESTX 0x04 /* AES transmitter DMA port */
+#define H2I_DMA_PORT_EN_CODECTX 0x08 /* CODEC transmit DMA port */
+#define H2I_DMA_PORT_EN_CODECR 0x10 /* CODEC receive DMA port */
+
+#define H2I_DMA_END 0x9108 /* global dma endian select */
+#define H2I_DMA_END_SY_IN 0x01 /* Synth_in DMA port */
+#define H2I_DMA_END_AESRX 0x02 /* AES receiver DMA port */
+#define H2I_DMA_END_AESTX 0x04 /* AES transmitter DMA port */
+#define H2I_DMA_END_CODECTX 0x08 /* CODEC transmit DMA port */
+#define H2I_DMA_END_CODECR 0x10 /* CODEC receive DMA port */
+ /* 0=b_end 1=l_end */
+
+#define H2I_DMA_DRV 0x910C /* global PBUS DMA enable */
+
+#define H2I_SYNTH_C 0x1104 /* Synth DMA control */
+
+#define H2I_AESRX_C 0x1204 /* AES RX dma control */
+
+#define H2I_C_TS_EN 0x20 /* Timestamp enable */
+#define H2I_C_TS_FRMT 0x40 /* Timestamp format */
+#define H2I_C_NAUDIO 0x80 /* Sign extend */
+
+/* AESRX CTL, 16 bit */
+
+#define H2I_AESTX_C 0x1304 /* AES TX DMA control */
+#define H2I_AESTX_C_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */
+#define H2I_AESTX_C_CLKID_M 0x18
+#define H2I_AESTX_C_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */
+#define H2I_AESTX_C_DATAT_M 0x300
+
+/* CODEC registers */
+
+#define H2I_DAC_C1 0x1404 /* DAC DMA control, 16 bit */
+#define H2I_DAC_C2 0x1408 /* DAC DMA control, 32 bit */
+#define H2I_ADC_C1 0x1504 /* ADC DMA control, 16 bit */
+#define H2I_ADC_C2 0x1508 /* ADC DMA control, 32 bit */
+
+/* Bits in CTL1 register */
+
+#define H2I_C1_DMA_SHIFT 0 /* DMA channel */
+#define H2I_C1_DMA_M 0x7
+#define H2I_C1_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */
+#define H2I_C1_CLKID_M 0x18
+#define H2I_C1_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */
+#define H2I_C1_DATAT_M 0x300
+
+/* Bits in CTL2 register */
+
+#define H2I_C2_R_GAIN_SHIFT 0 /* right a/d input gain */
+#define H2I_C2_R_GAIN_M 0xf
+#define H2I_C2_L_GAIN_SHIFT 4 /* left a/d input gain */
+#define H2I_C2_L_GAIN_M 0xf0
+#define H2I_C2_R_SEL 0x100 /* right input select */
+#define H2I_C2_L_SEL 0x200 /* left input select */
+#define H2I_C2_MUTE 0x400 /* mute */
+#define H2I_C2_DO1 0x00010000 /* digital output port bit 0 */
+#define H2I_C2_DO2 0x00020000 /* digital output port bit 1 */
+#define H2I_C2_R_ATT_SHIFT 18 /* right d/a output - */
+#define H2I_C2_R_ATT_M 0x007c0000 /* attenuation */
+#define H2I_C2_L_ATT_SHIFT 23 /* left d/a output - */
+#define H2I_C2_L_ATT_M 0x0f800000 /* attenuation */
+
+#define H2I_SYNTH_MAP_C 0x1104 /* synth dma handshake ctrl */
+
+/* Clock generator CTL 1, 16 bit */
+
+#define H2I_BRES1_C1 0x2104
+#define H2I_BRES2_C1 0x2204
+#define H2I_BRES3_C1 0x2304
+
+#define H2I_BRES_C1_SHIFT 0 /* 0=48.0 1=44.1 2=aes_rx */
+#define H2I_BRES_C1_M 0x03
+
+/* Clock generator CTL 2, 32 bit */
+
+#define H2I_BRES1_C2 0x2108
+#define H2I_BRES2_C2 0x2208
+#define H2I_BRES3_C2 0x2308
+
+#define H2I_BRES_C2_INC_SHIFT 0 /* increment value */
+#define H2I_BRES_C2_INC_M 0xffff
+#define H2I_BRES_C2_MOD_SHIFT 16 /* modcontrol value */
+#define H2I_BRES_C2_MOD_M 0xffff0000 /* modctrl=0xffff&(modinc-1) */
+
+/* Unix timer, 64 bit */
+
+#define H2I_UTIME 0x3104
+#define H2I_UTIME_0_LD 0xffff /* microseconds, LSB's */
+#define H2I_UTIME_1_LD0 0x0f /* microseconds, MSB's */
+#define H2I_UTIME_1_LD1 0xf0 /* tenths of microseconds */
+#define H2I_UTIME_2_LD 0xffff /* seconds, LSB's */
+#define H2I_UTIME_3_LD 0xffff /* seconds, MSB's */
+
+struct hal2_ctl_regs {
+ u32 _unused0[4];
+ u32 isr; /* 0x10 Status Register */
+ u32 _unused1[3];
+ u32 rev; /* 0x20 Revision Register */
+ u32 _unused2[3];
+ u32 iar; /* 0x30 Indirect Address Register */
+ u32 _unused3[3];
+ u32 idr0; /* 0x40 Indirect Data Register 0 */
+ u32 _unused4[3];
+ u32 idr1; /* 0x50 Indirect Data Register 1 */
+ u32 _unused5[3];
+ u32 idr2; /* 0x60 Indirect Data Register 2 */
+ u32 _unused6[3];
+ u32 idr3; /* 0x70 Indirect Data Register 3 */
+};
+
+struct hal2_aes_regs {
+ u32 rx_stat[2]; /* Status registers */
+ u32 rx_cr[2]; /* Control registers */
+ u32 rx_ud[4]; /* User data window */
+ u32 rx_st[24]; /* Channel status data */
+
+ u32 tx_stat[1]; /* Status register */
+ u32 tx_cr[3]; /* Control registers */
+ u32 tx_ud[4]; /* User data window */
+ u32 tx_st[24]; /* Channel status data */
+};
+
+struct hal2_vol_regs {
+ u32 right; /* Right volume */
+ u32 left; /* Left volume */
+};
+
+struct hal2_syn_regs {
+ u32 _unused0[2];
+ u32 page; /* DOC Page register */
+ u32 regsel; /* DOC Register selection */
+ u32 dlow; /* DOC Data low */
+ u32 dhigh; /* DOC Data high */
+ u32 irq; /* IRQ Status */
+ u32 dram; /* DRAM Access */
+};
+
+#endif /* __HAL2_H */
OpenPOWER on IntegriCloud